Freeradius with LDAP, PEAP MSCHAPv2
Robert Plestenjak
robert.plestenjak at xlab.si
Wed Mar 28 15:07:57 CEST 2018
Hello,
I'm trying to set up authentication over PEAP-MSCHAPv2. In LDAP I have NTLM-hashed passwords
Version is 3.0.13 from CentOS 7 repository.
Testing with radtest is successful:
Sent Access-Request Id 72 from 0.0.0.0:36799 to 127.0.0.1:1812 length 87
User-Name = "robert_plestenjak"
User-Password = "XXX"
NAS-IP-Address = X.X.X.X
NAS-Port = 1812
Message-Authenticator = 0x00
Cleartext-Password = "XXX"
Received Access-Accept Id 72 from 127.0.0.1:1812 to 0.0.0.0:0 length 20
When I test with Wifi (Cisco Meraki), it fails:
(0) Received Access-Request Id 60 from X.X.X.X:37829 to X.X.X.X:1812 length 271
(0) User-Name = "robert_plestenjak"
(0) NAS-IP-Address = X.X.X.X
(0) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(0) NAS-Port-Type = Wireless-802.11
(0) Service-Type = Framed-User
(0) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(0) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(0) Acct-Session-Id = "AE4E038CE2ACDB0A"
(0) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(0) WLAN-Pairwise-Cipher = 1027076
(0) WLAN-Group-Cipher = 1027076
(0) WLAN-AKM-Suite = 1027073
(0) Meraki-Device-Name = "olai"
(0) Framed-MTU = 1400
(0) EAP-Message = 0x0229001601726f626572745f706c657374656e6a616b
(0) Message-Authenticator = 0x0a1c310be4f79d6acca1eb4a67deb60e
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 41 length 22
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_md5 to process data
(0) eap_md5: Issuing MD5 Challenge
(0) eap: Sending EAP Request (code 1) ID 42 length 22
(0) eap: EAP session adding &reply:State = 0x46c8d21046e2d6bc
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 60 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(0) EAP-Message = 0x012a00160410dddf52a2d853bc9017a6c96d00a0b389
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x46c8d21046e2d6bc6e5900b0d6f9d128
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 61 from X.X.X.X:37829 to X.X.X.X:1812 length 273
(1) User-Name = "robert_plestenjak"
(1) NAS-IP-Address = X.X.X.X
(1) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(1) NAS-Port-Type = Wireless-802.11
(1) Service-Type = Framed-User
(1) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(1) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(1) Acct-Session-Id = "AE4E038CE2ACDB0A"
(1) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(1) WLAN-Pairwise-Cipher = 1027076
(1) WLAN-Group-Cipher = 1027076
(1) WLAN-AKM-Suite = 1027073
(1) Meraki-Device-Name = "olai"
(1) Framed-MTU = 1400
(1) EAP-Message = 0x022a00060319
(1) State = 0x46c8d21046e2d6bc6e5900b0d6f9d128
(1) Message-Authenticator = 0xd3ffb74c0af4b8f5b52afbf18d82b8d2
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 42 length 6
(1) eap: No EAP Start, assuming it's an on-going EAP conversation
(1) [eap] = updated
(1) [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(1) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(1) ldap: --> (uid=robert_plestenjak)
(1) ldap: Performing search in "dc=xlab,dc=si" with filter "(uid=robert_plestenjak)", scope "sub"
(1) ldap: Waiting for search result...
(1) ldap: User object found at DN "cn=Robert Plestenjak,ou=people,ou=xlab-research,dc=xlab,dc=si"
(1) ldap: Processing user attributes
(1) ldap: control:Password-With-Header += 'XXX'
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldaps://auth3.xlab.si:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(1) [ldap] = updated
(1) if ((ok || updated) && User-Password) {
(1) if ((ok || updated) && User-Password) -> FALSE
(1) [expiration] = noop
(1) [logintime] = noop
(1) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password
(1) pap: Removing &control:Password-With-Header
(1) pap: WARNING: Auth-Type already set. Not setting to PAP
(1) [pap] = noop
(1) } # authorize = updated
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0x46c8d21046e2d6bc
(1) eap: Finished EAP session with state 0x46c8d21046e2d6bc
(1) eap: Previous EAP request found for state 0x46c8d21046e2d6bc, released from the list
(1) eap: Peer sent packet with method EAP NAK (3)
(1) eap: Found mutually acceptable type PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 43 length 6
(1) eap: EAP session adding &reply:State = 0x46c8d21047e3cbbc
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 61 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(1) EAP-Message = 0x012b00061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x46c8d21047e3cbbc6e5900b0d6f9d128
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 62 from X.X.X.X:37829 to X.X.X.X:1812 length 416
(2) User-Name = "robert_plestenjak"
(2) NAS-IP-Address = X.X.X.X
(2) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(2) NAS-Port-Type = Wireless-802.11
(2) Service-Type = Framed-User
(2) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(2) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(2) Acct-Session-Id = "AE4E038CE2ACDB0A"
(2) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(2) WLAN-Pairwise-Cipher = 1027076
(2) WLAN-Group-Cipher = 1027076
(2) WLAN-AKM-Suite = 1027073
(2) Meraki-Device-Name = "olai"
(2) Framed-MTU = 1400
(2) EAP-Message = 0x022b009519800000008b160301008601000082030318104905101d0258ca25ae0986254aedf90b1c8fdf08e710e17c259b38fd5ad000002ac02bc02fc02cc030cca9cca8c009c023c013c027c00ac024c014c028009c009d002f003c0035003d000a0100002fff0100010000170000000d0010000e0403
(2) State = 0x46c8d21047e3cbbc6e5900b0d6f9d128
(2) Message-Authenticator = 0x8d7c5c5560d235684aceeb01ee99f66b
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 43 length 149
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x46c8d21047e3cbbc
(2) eap: Finished EAP session with state 0x46c8d21047e3cbbc
(2) eap: Previous EAP request found for state 0x46c8d21047e3cbbc, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 139 bytes
(2) eap_peap: Got complete TLS record (139 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before/accept initialization
(2) eap_peap: TLS_accept: before/accept initialization
(2) eap_peap: <<< recv TLS 1.2 [length 0086]
(2) eap_peap: TLS_accept: SSLv3 read client hello A
(2) eap_peap: >>> send TLS 1.2 [length 0039]
(2) eap_peap: TLS_accept: SSLv3 write server hello A
(2) eap_peap: >>> send TLS 1.2 [length 08d3]
(2) eap_peap: TLS_accept: SSLv3 write certificate A
(2) eap_peap: >>> send TLS 1.2 [length 014d]
(2) eap_peap: TLS_accept: SSLv3 write key exchange A
(2) eap_peap: >>> send TLS 1.2 [length 0004]
(2) eap_peap: TLS_accept: SSLv3 write server done A
(2) eap_peap: TLS_accept: SSLv3 flush data
(2) eap_peap: TLS_accept: SSLv3 read client certificate A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(2) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 44 length 1004
(2) eap: EAP session adding &reply:State = 0x46c8d21044e4cbbc
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 62 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(2) EAP-Message = 0x012c03ec19c000000a711603030039020000350303ea32a5d7a1bbfdbf9e7ee34e29050563b1ffc93c77c2247fb4634b9936ff065600c02f00000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x46c8d21044e4cbbc6e5900b0d6f9d128
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 63 from X.X.X.X:37829 to X.X.X.X:1812 length 273
(3) User-Name = "robert_plestenjak"
(3) NAS-IP-Address = X.X.X.X
(3) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(3) NAS-Port-Type = Wireless-802.11
(3) Service-Type = Framed-User
(3) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(3) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(3) Acct-Session-Id = "AE4E038CE2ACDB0A"
(3) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(3) WLAN-Pairwise-Cipher = 1027076
(3) WLAN-Group-Cipher = 1027076
(3) WLAN-AKM-Suite = 1027073
(3) Meraki-Device-Name = "olai"
(3) Framed-MTU = 1400
(3) EAP-Message = 0x022c00061900
(3) State = 0x46c8d21044e4cbbc6e5900b0d6f9d128
(3) Message-Authenticator = 0x44ed2c1a2c57511fb51626d94cea998d
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 44 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x46c8d21044e4cbbc
(3) eap: Finished EAP session with state 0x46c8d21044e4cbbc
(3) eap: Previous EAP request found for state 0x46c8d21044e4cbbc, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 45 length 1000
(3) eap: EAP session adding &reply:State = 0x46c8d21045e5cbbc
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 63 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(3) EAP-Message = 0x012d03e819402dbdf62800fd47c44b6189df90644cc345df23b390e938143137414b4dc3906a2aefff96f82551639cf9a10ead226ee8a9d0d7c4bf51bcca698315290b7a181527f2841445909d7d420004e8308204e4308203cca003020102020900d20da3179fcff6af300d06092a864886f70d01010b
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x46c8d21045e5cbbc6e5900b0d6f9d128
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 64 from X.X.X.X:37829 to X.X.X.X:1812 length 273
(4) User-Name = "robert_plestenjak"
(4) NAS-IP-Address = X.X.X.X
(4) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(4) NAS-Port-Type = Wireless-802.11
(4) Service-Type = Framed-User
(4) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(4) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(4) Acct-Session-Id = "AE4E038CE2ACDB0A"
(4) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(4) WLAN-Pairwise-Cipher = 1027076
(4) WLAN-Group-Cipher = 1027076
(4) WLAN-AKM-Suite = 1027073
(4) Meraki-Device-Name = "olai"
(4) Framed-MTU = 1400
(4) EAP-Message = 0x022d00061900
(4) State = 0x46c8d21045e5cbbc6e5900b0d6f9d128
(4) Message-Authenticator = 0xa82ea1907b66b0e0486d7358963589a7
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 45 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x46c8d21045e5cbbc
(4) eap: Finished EAP session with state 0x46c8d21045e5cbbc
(4) eap: Previous EAP request found for state 0x46c8d21045e5cbbc, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment
(4) eap_peap: [eaptls verify] = request
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 46 length 691
(4) eap: EAP session adding &reply:State = 0x46c8d21042e6cbbc
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 64 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(4) EAP-Message = 0x012e02b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010082ec17a6a7053cdb07445b2a8258e5e5f0cad094486cb4a81527d41f7ff73f
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x46c8d21042e6cbbc6e5900b0d6f9d128
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 65 from X.X.X.X:37829 to X.X.X.X:1812 length 403
(5) User-Name = "robert_plestenjak"
(5) NAS-IP-Address = X.X.X.X
(5) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(5) NAS-Port-Type = Wireless-802.11
(5) Service-Type = Framed-User
(5) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(5) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(5) Acct-Session-Id = "AE4E038CE2ACDB0A"
(5) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(5) WLAN-Pairwise-Cipher = 1027076
(5) WLAN-Group-Cipher = 1027076
(5) WLAN-AKM-Suite = 1027073
(5) Meraki-Device-Name = "olai"
(5) Framed-MTU = 1400
(5) EAP-Message = 0x022e008819800000007e1603030046100000424104fb2e08dfc5eb824bcf64fbb8ff77906d79826239bbc5ff15023c4371596d0422c7ea05f73a3fdffa848b11c8d757eba23c64302d202b63022e12e35a6f23fc48140303000101160303002800000000000000005b6195d7b05366d7ac3d11cf44f77c
(5) State = 0x46c8d21042e6cbbc6e5900b0d6f9d128
(5) Message-Authenticator = 0xcdb102cb862715a789a736e630c4b31f
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 46 length 136
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x46c8d21042e6cbbc
(5) eap: Finished EAP session with state 0x46c8d21042e6cbbc
(5) eap: Previous EAP request found for state 0x46c8d21042e6cbbc, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(5) eap_peap: Got complete TLS record (126 bytes)
(5) eap_peap: [eaptls verify] = length included
(5) eap_peap: <<< recv TLS 1.2 [length 0046]
(5) eap_peap: TLS_accept: SSLv3 read client key exchange A
(5) eap_peap: TLS_accept: SSLv3 read certificate verify A
(5) eap_peap: <<< recv TLS 1.2 [length 0001]
(5) eap_peap: <<< recv TLS 1.2 [length 0010]
(5) eap_peap: TLS_accept: SSLv3 read finished A
(5) eap_peap: >>> send TLS 1.2 [length 0001]
(5) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap: >>> send TLS 1.2 [length 0010]
(5) eap_peap: TLS_accept: SSLv3 write finished A
(5) eap_peap: TLS_accept: SSLv3 flush data
(5) eap_peap: (other): SSL negotiation finished successfully
(5) eap_peap: SSL Connection Established
(5) eap_peap: [eaptls process] = handled
(5) eap: Sending EAP Request (code 1) ID 47 length 57
(5) eap: EAP session adding &reply:State = 0x46c8d21043e7cbbc
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 65 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(5) EAP-Message = 0x012f003919001403030001011603030028652f3ff10fb2c5ec7eaba85c96965e3cdaebaab760ef337bdf697193d7580a6381d9bc98fce6eb16
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x46c8d21043e7cbbc6e5900b0d6f9d128
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 66 from X.X.X.X:37829 to X.X.X.X:1812 length 273
(6) User-Name = "robert_plestenjak"
(6) NAS-IP-Address = X.X.X.X
(6) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(6) NAS-Port-Type = Wireless-802.11
(6) Service-Type = Framed-User
(6) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(6) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(6) Acct-Session-Id = "AE4E038CE2ACDB0A"
(6) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(6) WLAN-Pairwise-Cipher = 1027076
(6) WLAN-Group-Cipher = 1027076
(6) WLAN-AKM-Suite = 1027073
(6) Meraki-Device-Name = "olai"
(6) Framed-MTU = 1400
(6) EAP-Message = 0x022f00061900
(6) State = 0x46c8d21043e7cbbc6e5900b0d6f9d128
(6) Message-Authenticator = 0xf613e30b444fdc6251b89176c4ea98e3
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 47 length 6
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x46c8d21043e7cbbc
(6) eap: Finished EAP session with state 0x46c8d21043e7cbbc
(6) eap: Previous EAP request found for state 0x46c8d21043e7cbbc, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(6) eap_peap: [eaptls verify] = success
(6) eap_peap: [eaptls process] = success
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state TUNNEL ESTABLISHED
(6) eap: Sending EAP Request (code 1) ID 48 length 40
(6) eap: EAP session adding &reply:State = 0x46c8d21040f8cbbc
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 66 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(6) EAP-Message = 0x013000281900170303001d652f3ff10fb2c5edc396f1fb96534d5a09ed3bd8844d3cb98c691e6cdd
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x46c8d21040f8cbbc6e5900b0d6f9d128
(6) Finished request
Waking up in 4.9 seconds.
(7) Received Access-Request Id 67 from X.X.X.X:37829 to X.X.X.X:1812 length 320
(7) User-Name = "robert_plestenjak"
(7) NAS-IP-Address = X.X.X.X
(7) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(7) NAS-Port-Type = Wireless-802.11
(7) Service-Type = Framed-User
(7) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(7) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(7) Acct-Session-Id = "AE4E038CE2ACDB0A"
(7) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(7) WLAN-Pairwise-Cipher = 1027076
(7) WLAN-Group-Cipher = 1027076
(7) WLAN-AKM-Suite = 1027073
(7) Meraki-Device-Name = "olai"
(7) Framed-MTU = 1400
(7) EAP-Message = 0x023000351900170303002a000000000000000125e0edd772c07188d67f8ac17c95b08291f4d8ee740ac579a17566729c283e4de6c8
(7) State = 0x46c8d21040f8cbbc6e5900b0d6f9d128
(7) Message-Authenticator = 0x12f53a0a6021756bf2a6b2fc55a901a3
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 48 length 53
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x46c8d21040f8cbbc
(7) eap: Finished EAP session with state 0x46c8d21040f8cbbc
(7) eap: Previous EAP request found for state 0x46c8d21040f8cbbc, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(7) eap_peap: Identity - robert_plestenjak
(7) eap_peap: Got inner identity 'robert_plestenjak'
(7) eap_peap: Setting default EAP type for tunneled EAP session
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message = 0x0230001601726f626572745f706c657374656e6a616b
(7) eap_peap: Setting User-Name to robert_plestenjak
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message = 0x0230001601726f626572745f706c657374656e6a616b
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "robert_plestenjak"
(7) Virtual server inner-tunnel received request
(7) EAP-Message = 0x0230001601726f626572745f706c657374656e6a616b
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "robert_plestenjak"
(7) WARNING: Outer and inner identities are the same. User privacy is compromised.
(7) server inner-tunnel {
(7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 48 length 22
(7) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Peer sent packet with method EAP Identity (1)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap_mschapv2: Issuing Challenge
(7) eap: Sending EAP Request (code 1) ID 49 length 43
(7) eap: EAP session adding &reply:State = 0xb9b0a1f1b981bb6e
(7) [eap] = handled
(7) } # authenticate = handled
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) EAP-Message = 0x0131002b1a0131002610c55413e285b325a381cfe991245249f6667265657261646975732d332e302e3133
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xb9b0a1f1b981bb6ee399006fef12b2ad
(7) eap_peap: Got tunneled reply code 11
(7) eap_peap: EAP-Message = 0x0131002b1a0131002610c55413e285b325a381cfe991245249f6667265657261646975732d332e302e3133
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0xb9b0a1f1b981bb6ee399006fef12b2ad
(7) eap_peap: Got tunneled reply RADIUS code 11
(7) eap_peap: EAP-Message = 0x0131002b1a0131002610c55413e285b325a381cfe991245249f6667265657261646975732d332e302e3133
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: State = 0xb9b0a1f1b981bb6ee399006fef12b2ad
(7) eap_peap: Got tunneled Access-Challenge
(7) eap: Sending EAP Request (code 1) ID 49 length 74
(7) eap: EAP session adding &reply:State = 0x46c8d21041f9cbbc
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 67 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(7) EAP-Message = 0x0131004a1900170303003f652f3ff10fb2c5ee7d1dc7c9e2a8eab376bcf614675fc6b749d9d35b70d018df036218eb66b192f7a667d1512441f23b4b8ed103e7e51abcc1ccb629d4b709
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x46c8d21041f9cbbc6e5900b0d6f9d128
(7) Finished request
Waking up in 4.9 seconds.
(8) Received Access-Request Id 68 from X.X.X.X:37829 to X.X.X.X:1812 length 374
(8) User-Name = "robert_plestenjak"
(8) NAS-IP-Address = X.X.X.X
(8) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(8) NAS-Port-Type = Wireless-802.11
(8) Service-Type = Framed-User
(8) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(8) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(8) Acct-Session-Id = "AE4E038CE2ACDB0A"
(8) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(8) WLAN-Pairwise-Cipher = 1027076
(8) WLAN-Group-Cipher = 1027076
(8) WLAN-AKM-Suite = 1027073
(8) Meraki-Device-Name = "olai"
(8) Framed-MTU = 1400
(8) EAP-Message = 0x0231006b1900170303006000000000000000023889c5f8167aca23ac8159b1f565ea917ee16b989cfa799eec8b81911bc2fd6c32b4c44cd11d900a80376691793a616e041565552c1f286df0b04e830cc018dea39f6666cf1486ce3f36872ee5611b78130639007839772d
(8) State = 0x46c8d21041f9cbbc6e5900b0d6f9d128
(8) Message-Authenticator = 0xd7d29fba79fdde7e4401eef1926543e4
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/raddb/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 49 length 107
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0xb9b0a1f1b981bb6e
(8) eap: Finished EAP session with state 0x46c8d21041f9cbbc
(8) eap: Previous EAP request found for state 0x46c8d21041f9cbbc, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state phase2
(8) eap_peap: EAP method MSCHAPv2 (26)
(8) eap_peap: Got tunneled request
(8) eap_peap: EAP-Message = 0x0231004c1a023100473134d1e890f521ae70fbd338821cf2707b0000000000000000eeae867724f7f70ac517e7c1d96c26cb95f034fbd44e93dd00726f626572745f706c657374656e6a616b
(8) eap_peap: Setting User-Name to robert_plestenjak
(8) eap_peap: Sending tunneled request to inner-tunnel
(8) eap_peap: EAP-Message = 0x0231004c1a023100473134d1e890f521ae70fbd338821cf2707b0000000000000000eeae867724f7f70ac517e7c1d96c26cb95f034fbd44e93dd00726f626572745f706c657374656e6a616b
(8) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(8) eap_peap: User-Name = "robert_plestenjak"
(8) eap_peap: State = 0xb9b0a1f1b981bb6ee399006fef12b2ad
(8) Virtual server inner-tunnel received request
(8) EAP-Message = 0x0231004c1a023100473134d1e890f521ae70fbd338821cf2707b0000000000000000eeae867724f7f70ac517e7c1d96c26cb95f034fbd44e93dd00726f626572745f706c657374656e6a616b
(8) FreeRADIUS-Proxied-To = 127.0.0.1
(8) User-Name = "robert_plestenjak"
(8) State = 0xb9b0a1f1b981bb6ee399006fef12b2ad
(8) WARNING: Outer and inner identities are the same. User privacy is compromised.
(8) server inner-tunnel {
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [chap] = noop
(8) [mschap] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) update control {
(8) &Proxy-To-Realm := LOCAL
(8) } # update control = noop
(8) eap: Peer sent EAP Response (code 2) ID 49 length 76
(8) eap: No EAP Start, assuming it's an on-going EAP conversation
(8) [eap] = updated
(8) [files] = noop
rlm_ldap (ldap): Reserved connection (1)
(8) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(8) ldap: --> (uid=robert_plestenjak)
(8) ldap: Performing search in "dc=xlab,dc=si" with filter "(uid=robert_plestenjak)", scope "sub"
(8) ldap: Waiting for search result...
(8) ldap: User object found at DN "cn=Robert Plestenjak,ou=people,ou=xlab-research,dc=xlab,dc=si"
(8) ldap: Processing user attributes
(8) ldap: control:Password-With-Header += 'XXX'
rlm_ldap (ldap): Released connection (1)
(8) [ldap] = updated
(8) [expiration] = noop
(8) [logintime] = noop
(8) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password
(8) pap: Removing &control:Password-With-Header
(8) pap: WARNING: Auth-Type already set. Not setting to PAP
(8) [pap] = noop
(8) } # authorize = updated
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(8) authenticate {
(8) eap: Expiring EAP session with state 0xb9b0a1f1b981bb6e
(8) eap: Finished EAP session with state 0xb9b0a1f1b981bb6e
(8) eap: Previous EAP request found for state 0xb9b0a1f1b981bb6e, released from the list
(8) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(8) eap: Calling submodule eap_mschapv2 to process data
(8) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(8) eap_mschapv2: authenticate {
(8) mschap: Found Cleartext-Password, hashing to create NT-Password
(8) mschap: Found Cleartext-Password, hashing to create LM-Password
(8) mschap: Creating challenge hash with username: robert_plestenjak
(8) mschap: Client is using MS-CHAPv2
(8) mschap: ERROR: MS-CHAP2-Response is incorrect
(8) [mschap] = reject
(8) } # authenticate = reject
(8) eap: Sending EAP Failure (code 4) ID 49 length 4
(8) eap: Freeing handler
(8) [eap] = reject
(8) } # authenticate = reject
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(8) Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject: --> robert_plestenjak
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8) [attr_filter.access_reject] = updated
(8) update outer.session-state {
(8) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: MS-CHAP2-Response is incorrect'
(8) } # update outer.session-state = noop
(8) } # Post-Auth-Type REJECT = updated
(8) } # server inner-tunnel
(8) Virtual server sending reply
(8) MS-CHAP-Error = "1E=691 R=1 C=d8407b0aa2c7a010f49f4e37fef85724 V=3 M=Authentication failed"
(8) EAP-Message = 0x04310004
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Got tunneled reply code 3
(8) eap_peap: MS-CHAP-Error = "1E=691 R=1 C=d8407b0aa2c7a010f49f4e37fef85724 V=3 M=Authentication failed"
(8) eap_peap: EAP-Message = 0x04310004
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Got tunneled reply RADIUS code 3
(8) eap_peap: MS-CHAP-Error = "1E=691 R=1 C=d8407b0aa2c7a010f49f4e37fef85724 V=3 M=Authentication failed"
(8) eap_peap: EAP-Message = 0x04310004
(8) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(8) eap_peap: Tunneled authentication was rejected
(8) eap_peap: FAILURE
(8) eap: Sending EAP Request (code 1) ID 50 length 46
(8) eap: EAP session adding &reply:State = 0x46c8d2104efacbbc
(8) [eap] = handled
(8) } # authenticate = handled
(8) Using Post-Auth-Type Challenge
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8) Challenge { ... } # empty sub-section is ignored
(8) session-state: Saving cached attributes
(8) Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect"
(8) Sent Access-Challenge Id 68 from X.X.X.X:1812 to X.X.X.X:37829 length 0
(8) EAP-Message = 0x0132002e19001703030023652f3ff10fb2c5ef30b7fb1e252f2bf6a22244994486f4debfdf66bcd18faa30877532
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) State = 0x46c8d2104efacbbc6e5900b0d6f9d128
(8) Finished request
Waking up in 4.8 seconds.
(9) Received Access-Request Id 69 from X.X.X.X:37829 to X.X.X.X:1812 length 313
(9) User-Name = "robert_plestenjak"
(9) NAS-IP-Address = X.X.X.X
(9) Called-Station-Id = "82-15-54-A9-EB-44:Blubber"
(9) NAS-Port-Type = Wireless-802.11
(9) Service-Type = Framed-User
(9) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(9) Connect-Info = "CONNECT 54.00 Mbps, 802.11ac, RSSI: 31, Channel: 108"
(9) Acct-Session-Id = "AE4E038CE2ACDB0A"
(9) Acct-Multi-Session-Id = "3F1C9E9F7EE1D184"
(9) WLAN-Pairwise-Cipher = 1027076
(9) WLAN-Group-Cipher = 1027076
(9) WLAN-AKM-Suite = 1027073
(9) Meraki-Device-Name = "olai"
(9) Framed-MTU = 1400
(9) EAP-Message = 0x0232002e19001703030023000000000000000389125c7c96bd31281466aa12830d3193192521ab1698685080c754
(9) State = 0x46c8d2104efacbbc6e5900b0d6f9d128
(9) Message-Authenticator = 0xfd042959aaae54e9dd9ac31800d0667b
(9) Restoring &session-state
(9) &session-state:Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect"
(9) # Executing section authorize from file /etc/raddb/sites-enabled/default
(9) authorize {
(9) policy filter_username {
(9) if (&User-Name) {
(9) if (&User-Name) -> TRUE
(9) if (&User-Name) {
(9) if (&User-Name =~ / /) {
(9) if (&User-Name =~ / /) -> FALSE
(9) if (&User-Name =~ /@[^@]*@/ ) {
(9) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(9) if (&User-Name =~ /\.\./ ) {
(9) if (&User-Name =~ /\.\./ ) -> FALSE
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(9) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(9) if (&User-Name =~ /\.$/) {
(9) if (&User-Name =~ /\.$/) -> FALSE
(9) if (&User-Name =~ /@\./) {
(9) if (&User-Name =~ /@\./) -> FALSE
(9) } # if (&User-Name) = notfound
(9) } # policy filter_username = notfound
(9) [preprocess] = ok
(9) [chap] = noop
(9) [mschap] = noop
(9) [digest] = noop
(9) suffix: Checking for suffix after "@"
(9) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(9) suffix: No such realm "NULL"
(9) [suffix] = noop
(9) eap: Peer sent EAP Response (code 2) ID 50 length 46
(9) eap: Continuing tunnel setup
(9) [eap] = ok
(9) } # authorize = ok
(9) Found Auth-Type = eap
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9) authenticate {
(9) eap: Expiring EAP session with state 0x46c8d2104efacbbc
(9) eap: Finished EAP session with state 0x46c8d2104efacbbc
(9) eap: Previous EAP request found for state 0x46c8d2104efacbbc, released from the list
(9) eap: Peer sent packet with method EAP PEAP (25)
(9) eap: Calling submodule eap_peap to process data
(9) eap_peap: Continuing EAP-TLS
(9) eap_peap: [eaptls verify] = ok
(9) eap_peap: Done initial handshake
(9) eap_peap: [eaptls process] = ok
(9) eap_peap: Session established. Decoding tunneled attributes
(9) eap_peap: PEAP state send tlv failure
(9) eap_peap: Received EAP-TLV response
(9) eap_peap: ERROR: The users session was previously rejected: returning reject (again.)
(9) eap_peap: This means you need to read the PREVIOUS messages in the debug output
(9) eap_peap: to find out the reason why the user was rejected
(9) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you
(9) eap_peap: what went wrong, and how to fix the problem
(9) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
(9) eap: Sending EAP Failure (code 4) ID 50 length 4
(9) eap: Failed in EAP select
(9) [eap] = invalid
(9) } # authenticate = invalid
(9) Failed to authenticate the user
(9) Using Post-Auth-Type Reject
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9) Post-Auth-Type REJECT {
(9) attr_filter.access_reject: EXPAND %{User-Name}
(9) attr_filter.access_reject: --> robert_plestenjak
(9) attr_filter.access_reject: Matched entry DEFAULT at line 11
(9) [attr_filter.access_reject] = updated
(9) [eap] = noop
(9) policy remove_reply_message_if_eap {
(9) if (&reply:EAP-Message && &reply:Reply-Message) {
(9) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(9) else {
(9) [noop] = noop
(9) } # else = noop
(9) } # policy remove_reply_message_if_eap = noop
(9) } # Post-Auth-Type REJECT = updated
(9) Delaying response for 1.000000 seconds
Waking up in 0.6 seconds.
Waking up in 0.3 seconds.
(9) Sending delayed response
(9) Sent Access-Reject Id 69 from X.X.X.X:1812 to X.X.X.X:37829 length 44
(9) EAP-Message = 0x04320004
(9) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
(0) Cleaning up request packet ID 60 with timestamp +9
(1) Cleaning up request packet ID 61 with timestamp +9
(2) Cleaning up request packet ID 62 with timestamp +9
(3) Cleaning up request packet ID 63 with timestamp +9
(4) Cleaning up request packet ID 64 with timestamp +9
(5) Cleaning up request packet ID 65 with timestamp +9
(6) Cleaning up request packet ID 66 with timestamp +9
(7) Cleaning up request packet ID 67 with timestamp +9
(8) Cleaning up request packet ID 68 with timestamp +9
(9) Cleaning up request packet ID 69 with timestamp +9
Ready to process requests
(10) Received Access-Request Id 10 from X.X.X.X:51991 to X.X.X.X:1812 length 268
(10) User-Name = "robert_plestenjak"
(10) NAS-IP-Address = X.X.X.X
(10) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(10) NAS-Port-Type = Wireless-802.11
(10) Service-Type = Framed-User
(10) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(10) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(10) Acct-Session-Id = "6325D4B9D8CD9D01"
(10) Acct-Multi-Session-Id = "33B691AA5B968946"
(10) WLAN-Pairwise-Cipher = 1027076
(10) WLAN-Group-Cipher = 1027076
(10) WLAN-AKM-Suite = 1027073
(10) Meraki-Device-Name = "olai"
(10) Framed-MTU = 1400
(10) EAP-Message = 0x02cd001601726f626572745f706c657374656e6a616b
(10) Message-Authenticator = 0x9ef397887365b4a9c8d560ba66702b4c
(10) # Executing section authorize from file /etc/raddb/sites-enabled/default
(10) authorize {
(10) policy filter_username {
(10) if (&User-Name) {
(10) if (&User-Name) -> TRUE
(10) if (&User-Name) {
(10) if (&User-Name =~ / /) {
(10) if (&User-Name =~ / /) -> FALSE
(10) if (&User-Name =~ /@[^@]*@/ ) {
(10) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(10) if (&User-Name =~ /\.\./ ) {
(10) if (&User-Name =~ /\.\./ ) -> FALSE
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(10) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(10) if (&User-Name =~ /\.$/) {
(10) if (&User-Name =~ /\.$/) -> FALSE
(10) if (&User-Name =~ /@\./) {
(10) if (&User-Name =~ /@\./) -> FALSE
(10) } # if (&User-Name) = notfound
(10) } # policy filter_username = notfound
(10) [preprocess] = ok
(10) [chap] = noop
(10) [mschap] = noop
(10) [digest] = noop
(10) suffix: Checking for suffix after "@"
(10) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(10) suffix: No such realm "NULL"
(10) [suffix] = noop
(10) eap: Peer sent EAP Response (code 2) ID 205 length 22
(10) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(10) [eap] = ok
(10) } # authorize = ok
(10) Found Auth-Type = eap
(10) # Executing group from file /etc/raddb/sites-enabled/default
(10) authenticate {
(10) eap: Peer sent packet with method EAP Identity (1)
(10) eap: Calling submodule eap_md5 to process data
(10) eap_md5: Issuing MD5 Challenge
(10) eap: Sending EAP Request (code 1) ID 206 length 22
(10) eap: EAP session adding &reply:State = 0x13b4f8c8137afc0c
(10) [eap] = handled
(10) } # authenticate = handled
(10) Using Post-Auth-Type Challenge
(10) # Executing group from file /etc/raddb/sites-enabled/default
(10) Challenge { ... } # empty sub-section is ignored
(10) Sent Access-Challenge Id 10 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(10) EAP-Message = 0x01ce001604109894d79a35a2fc5f9745add589aedd82
(10) Message-Authenticator = 0x00000000000000000000000000000000
(10) State = 0x13b4f8c8137afc0caef2d3fb04d37962
(10) Finished request
Waking up in 4.9 seconds.
(11) Received Access-Request Id 11 from X.X.X.X:51991 to X.X.X.X:1812 length 270
(11) User-Name = "robert_plestenjak"
(11) NAS-IP-Address = X.X.X.X
(11) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(11) NAS-Port-Type = Wireless-802.11
(11) Service-Type = Framed-User
(11) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(11) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(11) Acct-Session-Id = "6325D4B9D8CD9D01"
(11) Acct-Multi-Session-Id = "33B691AA5B968946"
(11) WLAN-Pairwise-Cipher = 1027076
(11) WLAN-Group-Cipher = 1027076
(11) WLAN-AKM-Suite = 1027073
(11) Meraki-Device-Name = "olai"
(11) Framed-MTU = 1400
(11) EAP-Message = 0x02ce00060319
(11) State = 0x13b4f8c8137afc0caef2d3fb04d37962
(11) Message-Authenticator = 0xd17920bf05e0fcb93caee9ebdc02bb6e
(11) session-state: No cached attributes
(11) # Executing section authorize from file /etc/raddb/sites-enabled/default
(11) authorize {
(11) policy filter_username {
(11) if (&User-Name) {
(11) if (&User-Name) -> TRUE
(11) if (&User-Name) {
(11) if (&User-Name =~ / /) {
(11) if (&User-Name =~ / /) -> FALSE
(11) if (&User-Name =~ /@[^@]*@/ ) {
(11) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(11) if (&User-Name =~ /\.\./ ) {
(11) if (&User-Name =~ /\.\./ ) -> FALSE
(11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(11) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(11) if (&User-Name =~ /\.$/) {
(11) if (&User-Name =~ /\.$/) -> FALSE
(11) if (&User-Name =~ /@\./) {
(11) if (&User-Name =~ /@\./) -> FALSE
(11) } # if (&User-Name) = notfound
(11) } # policy filter_username = notfound
(11) [preprocess] = ok
(11) [chap] = noop
(11) [mschap] = noop
(11) [digest] = noop
(11) suffix: Checking for suffix after "@"
(11) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(11) suffix: No such realm "NULL"
(11) [suffix] = noop
(11) eap: Peer sent EAP Response (code 2) ID 206 length 6
(11) eap: No EAP Start, assuming it's an on-going EAP conversation
(11) [eap] = updated
(11) [files] = noop
rlm_ldap (ldap): Reserved connection (2)
(11) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(11) ldap: --> (uid=robert_plestenjak)
(11) ldap: Performing search in "dc=xlab,dc=si" with filter "(uid=robert_plestenjak)", scope "sub"
(11) ldap: Waiting for search result...
(11) ldap: User object found at DN "cn=Robert Plestenjak,ou=people,ou=xlab-research,dc=xlab,dc=si"
(11) ldap: Processing user attributes
(11) ldap: control:Password-With-Header += 'XXX'
rlm_ldap (ldap): Released connection (2)
Need 4 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (6), 1 of 26 pending slots used
rlm_ldap (ldap): Connecting to ldaps://auth3.xlab.si:636
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(11) [ldap] = updated
(11) if ((ok || updated) && User-Password) {
(11) if ((ok || updated) && User-Password) -> FALSE
(11) [expiration] = noop
(11) [logintime] = noop
(11) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password
(11) pap: Removing &control:Password-With-Header
(11) pap: WARNING: Auth-Type already set. Not setting to PAP
(11) [pap] = noop
(11) } # authorize = updated
(11) Found Auth-Type = eap
(11) # Executing group from file /etc/raddb/sites-enabled/default
(11) authenticate {
(11) eap: Expiring EAP session with state 0x13b4f8c8137afc0c
(11) eap: Finished EAP session with state 0x13b4f8c8137afc0c
(11) eap: Previous EAP request found for state 0x13b4f8c8137afc0c, released from the list
(11) eap: Peer sent packet with method EAP NAK (3)
(11) eap: Found mutually acceptable type PEAP (25)
(11) eap: Calling submodule eap_peap to process data
(11) eap_peap: Initiating new EAP-TLS session
(11) eap_peap: [eaptls start] = request
(11) eap: Sending EAP Request (code 1) ID 207 length 6
(11) eap: EAP session adding &reply:State = 0x13b4f8c8127be10c
(11) [eap] = handled
(11) } # authenticate = handled
(11) Using Post-Auth-Type Challenge
(11) # Executing group from file /etc/raddb/sites-enabled/default
(11) Challenge { ... } # empty sub-section is ignored
(11) Sent Access-Challenge Id 11 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(11) EAP-Message = 0x01cf00061920
(11) Message-Authenticator = 0x00000000000000000000000000000000
(11) State = 0x13b4f8c8127be10caef2d3fb04d37962
(11) Finished request
Waking up in 4.9 seconds.
(12) Received Access-Request Id 12 from X.X.X.X:51991 to X.X.X.X:1812 length 413
(12) User-Name = "robert_plestenjak"
(12) NAS-IP-Address = X.X.X.X
(12) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(12) NAS-Port-Type = Wireless-802.11
(12) Service-Type = Framed-User
(12) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(12) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(12) Acct-Session-Id = "6325D4B9D8CD9D01"
(12) Acct-Multi-Session-Id = "33B691AA5B968946"
(12) WLAN-Pairwise-Cipher = 1027076
(12) WLAN-Group-Cipher = 1027076
(12) WLAN-AKM-Suite = 1027073
(12) Meraki-Device-Name = "olai"
(12) Framed-MTU = 1400
(12) EAP-Message = 0x02cf009519800000008b1603010086010000820303a92d448a03d30bd55ed9e4048a71e3b984078789666a59e4f0b55047909bfaa900002ac02bc02fc02cc030cca9cca8c009c023c013c027c00ac024c014c028009c009d002f003c0035003d000a0100002fff0100010000170000000d0010000e0403
(12) State = 0x13b4f8c8127be10caef2d3fb04d37962
(12) Message-Authenticator = 0x75773d8e25d838dba548709fa45c599d
(12) session-state: No cached attributes
(12) # Executing section authorize from file /etc/raddb/sites-enabled/default
(12) authorize {
(12) policy filter_username {
(12) if (&User-Name) {
(12) if (&User-Name) -> TRUE
(12) if (&User-Name) {
(12) if (&User-Name =~ / /) {
(12) if (&User-Name =~ / /) -> FALSE
(12) if (&User-Name =~ /@[^@]*@/ ) {
(12) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(12) if (&User-Name =~ /\.\./ ) {
(12) if (&User-Name =~ /\.\./ ) -> FALSE
(12) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(12) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(12) if (&User-Name =~ /\.$/) {
(12) if (&User-Name =~ /\.$/) -> FALSE
(12) if (&User-Name =~ /@\./) {
(12) if (&User-Name =~ /@\./) -> FALSE
(12) } # if (&User-Name) = notfound
(12) } # policy filter_username = notfound
(12) [preprocess] = ok
(12) [chap] = noop
(12) [mschap] = noop
(12) [digest] = noop
(12) suffix: Checking for suffix after "@"
(12) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(12) suffix: No such realm "NULL"
(12) [suffix] = noop
(12) eap: Peer sent EAP Response (code 2) ID 207 length 149
(12) eap: Continuing tunnel setup
(12) [eap] = ok
(12) } # authorize = ok
(12) Found Auth-Type = eap
(12) # Executing group from file /etc/raddb/sites-enabled/default
(12) authenticate {
(12) eap: Expiring EAP session with state 0x13b4f8c8127be10c
(12) eap: Finished EAP session with state 0x13b4f8c8127be10c
(12) eap: Previous EAP request found for state 0x13b4f8c8127be10c, released from the list
(12) eap: Peer sent packet with method EAP PEAP (25)
(12) eap: Calling submodule eap_peap to process data
(12) eap_peap: Continuing EAP-TLS
(12) eap_peap: Peer indicated complete TLS record size will be 139 bytes
(12) eap_peap: Got complete TLS record (139 bytes)
(12) eap_peap: [eaptls verify] = length included
(12) eap_peap: (other): before/accept initialization
(12) eap_peap: TLS_accept: before/accept initialization
(12) eap_peap: <<< recv TLS 1.2 [length 0086]
(12) eap_peap: TLS_accept: SSLv3 read client hello A
(12) eap_peap: >>> send TLS 1.2 [length 0039]
(12) eap_peap: TLS_accept: SSLv3 write server hello A
(12) eap_peap: >>> send TLS 1.2 [length 08d3]
(12) eap_peap: TLS_accept: SSLv3 write certificate A
(12) eap_peap: >>> send TLS 1.2 [length 014d]
(12) eap_peap: TLS_accept: SSLv3 write key exchange A
(12) eap_peap: >>> send TLS 1.2 [length 0004]
(12) eap_peap: TLS_accept: SSLv3 write server done A
(12) eap_peap: TLS_accept: SSLv3 flush data
(12) eap_peap: TLS_accept: SSLv3 read client certificate A
(12) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(12) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A
(12) eap_peap: In SSL Handshake Phase
(12) eap_peap: In SSL Accept mode
(12) eap_peap: [eaptls process] = handled
(12) eap: Sending EAP Request (code 1) ID 208 length 1004
(12) eap: EAP session adding &reply:State = 0x13b4f8c81164e10c
(12) [eap] = handled
(12) } # authenticate = handled
(12) Using Post-Auth-Type Challenge
(12) # Executing group from file /etc/raddb/sites-enabled/default
(12) Challenge { ... } # empty sub-section is ignored
(12) Sent Access-Challenge Id 12 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(12) EAP-Message = 0x01d003ec19c000000a7116030300390200003503039ce049344384b2cbc710136022def40542d08e2187ae8522a95d7ea0da1a504100c02f00000dff01000100000b00040300010216030308d30b0008cf0008cc0003de308203da308202c2a003020102020101300d06092a864886f70d01010b050030
(12) Message-Authenticator = 0x00000000000000000000000000000000
(12) State = 0x13b4f8c81164e10caef2d3fb04d37962
(12) Finished request
Waking up in 4.9 seconds.
(13) Received Access-Request Id 13 from X.X.X.X:51991 to X.X.X.X:1812 length 270
(13) User-Name = "robert_plestenjak"
(13) NAS-IP-Address = X.X.X.X
(13) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(13) NAS-Port-Type = Wireless-802.11
(13) Service-Type = Framed-User
(13) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(13) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(13) Acct-Session-Id = "6325D4B9D8CD9D01"
(13) Acct-Multi-Session-Id = "33B691AA5B968946"
(13) WLAN-Pairwise-Cipher = 1027076
(13) WLAN-Group-Cipher = 1027076
(13) WLAN-AKM-Suite = 1027073
(13) Meraki-Device-Name = "olai"
(13) Framed-MTU = 1400
(13) EAP-Message = 0x02d000061900
(13) State = 0x13b4f8c81164e10caef2d3fb04d37962
(13) Message-Authenticator = 0xecee55183201a215ec44e13e79ca257c
(13) session-state: No cached attributes
(13) # Executing section authorize from file /etc/raddb/sites-enabled/default
(13) authorize {
(13) policy filter_username {
(13) if (&User-Name) {
(13) if (&User-Name) -> TRUE
(13) if (&User-Name) {
(13) if (&User-Name =~ / /) {
(13) if (&User-Name =~ / /) -> FALSE
(13) if (&User-Name =~ /@[^@]*@/ ) {
(13) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(13) if (&User-Name =~ /\.\./ ) {
(13) if (&User-Name =~ /\.\./ ) -> FALSE
(13) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(13) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(13) if (&User-Name =~ /\.$/) {
(13) if (&User-Name =~ /\.$/) -> FALSE
(13) if (&User-Name =~ /@\./) {
(13) if (&User-Name =~ /@\./) -> FALSE
(13) } # if (&User-Name) = notfound
(13) } # policy filter_username = notfound
(13) [preprocess] = ok
(13) [chap] = noop
(13) [mschap] = noop
(13) [digest] = noop
(13) suffix: Checking for suffix after "@"
(13) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(13) suffix: No such realm "NULL"
(13) [suffix] = noop
(13) eap: Peer sent EAP Response (code 2) ID 208 length 6
(13) eap: Continuing tunnel setup
(13) [eap] = ok
(13) } # authorize = ok
(13) Found Auth-Type = eap
(13) # Executing group from file /etc/raddb/sites-enabled/default
(13) authenticate {
(13) eap: Expiring EAP session with state 0x13b4f8c81164e10c
(13) eap: Finished EAP session with state 0x13b4f8c81164e10c
(13) eap: Previous EAP request found for state 0x13b4f8c81164e10c, released from the list
(13) eap: Peer sent packet with method EAP PEAP (25)
(13) eap: Calling submodule eap_peap to process data
(13) eap_peap: Continuing EAP-TLS
(13) eap_peap: Peer ACKed our handshake fragment
(13) eap_peap: [eaptls verify] = request
(13) eap_peap: [eaptls process] = handled
(13) eap: Sending EAP Request (code 1) ID 209 length 1000
(13) eap: EAP session adding &reply:State = 0x13b4f8c81065e10c
(13) [eap] = handled
(13) } # authenticate = handled
(13) Using Post-Auth-Type Challenge
(13) # Executing group from file /etc/raddb/sites-enabled/default
(13) Challenge { ... } # empty sub-section is ignored
(13) Sent Access-Challenge Id 13 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(13) EAP-Message = 0x01d103e819402dbdf62800fd47c44b6189df90644cc345df23b390e938143137414b4dc3906a2aefff96f82551639cf9a10ead226ee8a9d0d7c4bf51bcca698315290b7a181527f2841445909d7d420004e8308204e4308203cca003020102020900d20da3179fcff6af300d06092a864886f70d01010b
(13) Message-Authenticator = 0x00000000000000000000000000000000
(13) State = 0x13b4f8c81065e10caef2d3fb04d37962
(13) Finished request
Waking up in 4.9 seconds.
(14) Received Access-Request Id 14 from X.X.X.X:51991 to X.X.X.X:1812 length 270
(14) User-Name = "robert_plestenjak"
(14) NAS-IP-Address = X.X.X.X
(14) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(14) NAS-Port-Type = Wireless-802.11
(14) Service-Type = Framed-User
(14) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(14) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(14) Acct-Session-Id = "6325D4B9D8CD9D01"
(14) Acct-Multi-Session-Id = "33B691AA5B968946"
(14) WLAN-Pairwise-Cipher = 1027076
(14) WLAN-Group-Cipher = 1027076
(14) WLAN-AKM-Suite = 1027073
(14) Meraki-Device-Name = "olai"
(14) Framed-MTU = 1400
(14) EAP-Message = 0x02d100061900
(14) State = 0x13b4f8c81065e10caef2d3fb04d37962
(14) Message-Authenticator = 0x6808057d61ed210c43b2e7f0ed27c6b0
(14) session-state: No cached attributes
(14) # Executing section authorize from file /etc/raddb/sites-enabled/default
(14) authorize {
(14) policy filter_username {
(14) if (&User-Name) {
(14) if (&User-Name) -> TRUE
(14) if (&User-Name) {
(14) if (&User-Name =~ / /) {
(14) if (&User-Name =~ / /) -> FALSE
(14) if (&User-Name =~ /@[^@]*@/ ) {
(14) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(14) if (&User-Name =~ /\.\./ ) {
(14) if (&User-Name =~ /\.\./ ) -> FALSE
(14) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(14) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(14) if (&User-Name =~ /\.$/) {
(14) if (&User-Name =~ /\.$/) -> FALSE
(14) if (&User-Name =~ /@\./) {
(14) if (&User-Name =~ /@\./) -> FALSE
(14) } # if (&User-Name) = notfound
(14) } # policy filter_username = notfound
(14) [preprocess] = ok
(14) [chap] = noop
(14) [mschap] = noop
(14) [digest] = noop
(14) suffix: Checking for suffix after "@"
(14) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(14) suffix: No such realm "NULL"
(14) [suffix] = noop
(14) eap: Peer sent EAP Response (code 2) ID 209 length 6
(14) eap: Continuing tunnel setup
(14) [eap] = ok
(14) } # authorize = ok
(14) Found Auth-Type = eap
(14) # Executing group from file /etc/raddb/sites-enabled/default
(14) authenticate {
(14) eap: Expiring EAP session with state 0x13b4f8c81065e10c
(14) eap: Finished EAP session with state 0x13b4f8c81065e10c
(14) eap: Previous EAP request found for state 0x13b4f8c81065e10c, released from the list
(14) eap: Peer sent packet with method EAP PEAP (25)
(14) eap: Calling submodule eap_peap to process data
(14) eap_peap: Continuing EAP-TLS
(14) eap_peap: Peer ACKed our handshake fragment
(14) eap_peap: [eaptls verify] = request
(14) eap_peap: [eaptls process] = handled
(14) eap: Sending EAP Request (code 1) ID 210 length 691
(14) eap: EAP session adding &reply:State = 0x13b4f8c81766e10c
(14) [eap] = handled
(14) } # authenticate = handled
(14) Using Post-Auth-Type Challenge
(14) # Executing group from file /etc/raddb/sites-enabled/default
(14) Challenge { ... } # empty sub-section is ignored
(14) Sent Access-Challenge Id 14 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(14) EAP-Message = 0x01d202b319000530030101ff30360603551d1f042f302d302ba029a0278625687474703a2f2f7777772e6578616d706c652e6f72672f6578616d706c655f63612e63726c300d06092a864886f70d01010b0500038201010082ec17a6a7053cdb07445b2a8258e5e5f0cad094486cb4a81527d41f7ff73f
(14) Message-Authenticator = 0x00000000000000000000000000000000
(14) State = 0x13b4f8c81766e10caef2d3fb04d37962
(14) Finished request
Waking up in 4.9 seconds.
(15) Received Access-Request Id 15 from X.X.X.X:51991 to X.X.X.X:1812 length 400
(15) User-Name = "robert_plestenjak"
(15) NAS-IP-Address = X.X.X.X
(15) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(15) NAS-Port-Type = Wireless-802.11
(15) Service-Type = Framed-User
(15) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(15) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(15) Acct-Session-Id = "6325D4B9D8CD9D01"
(15) Acct-Multi-Session-Id = "33B691AA5B968946"
(15) WLAN-Pairwise-Cipher = 1027076
(15) WLAN-Group-Cipher = 1027076
(15) WLAN-AKM-Suite = 1027073
(15) Meraki-Device-Name = "olai"
(15) Framed-MTU = 1400
(15) EAP-Message = 0x02d2008819800000007e16030300461000004241046e9952972e88d85f4c8a0fec97f6921a748c8f3a9359e4c2f899fbfff13d0352d105d5dc817989b8830aa2e75623dbf2252b4df0338d9af3efac1ffbcb283d9714030300010116030300280000000000000000ba7043669f9c5cf21290c8c78fedd6
(15) State = 0x13b4f8c81766e10caef2d3fb04d37962
(15) Message-Authenticator = 0xdbfcb1ec8b36b3555264d93298e44ba3
(15) session-state: No cached attributes
(15) # Executing section authorize from file /etc/raddb/sites-enabled/default
(15) authorize {
(15) policy filter_username {
(15) if (&User-Name) {
(15) if (&User-Name) -> TRUE
(15) if (&User-Name) {
(15) if (&User-Name =~ / /) {
(15) if (&User-Name =~ / /) -> FALSE
(15) if (&User-Name =~ /@[^@]*@/ ) {
(15) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(15) if (&User-Name =~ /\.\./ ) {
(15) if (&User-Name =~ /\.\./ ) -> FALSE
(15) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(15) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(15) if (&User-Name =~ /\.$/) {
(15) if (&User-Name =~ /\.$/) -> FALSE
(15) if (&User-Name =~ /@\./) {
(15) if (&User-Name =~ /@\./) -> FALSE
(15) } # if (&User-Name) = notfound
(15) } # policy filter_username = notfound
(15) [preprocess] = ok
(15) [chap] = noop
(15) [mschap] = noop
(15) [digest] = noop
(15) suffix: Checking for suffix after "@"
(15) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(15) suffix: No such realm "NULL"
(15) [suffix] = noop
(15) eap: Peer sent EAP Response (code 2) ID 210 length 136
(15) eap: Continuing tunnel setup
(15) [eap] = ok
(15) } # authorize = ok
(15) Found Auth-Type = eap
(15) # Executing group from file /etc/raddb/sites-enabled/default
(15) authenticate {
(15) eap: Expiring EAP session with state 0x13b4f8c81766e10c
(15) eap: Finished EAP session with state 0x13b4f8c81766e10c
(15) eap: Previous EAP request found for state 0x13b4f8c81766e10c, released from the list
(15) eap: Peer sent packet with method EAP PEAP (25)
(15) eap: Calling submodule eap_peap to process data
(15) eap_peap: Continuing EAP-TLS
(15) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(15) eap_peap: Got complete TLS record (126 bytes)
(15) eap_peap: [eaptls verify] = length included
(15) eap_peap: <<< recv TLS 1.2 [length 0046]
(15) eap_peap: TLS_accept: SSLv3 read client key exchange A
(15) eap_peap: TLS_accept: SSLv3 read certificate verify A
(15) eap_peap: <<< recv TLS 1.2 [length 0001]
(15) eap_peap: <<< recv TLS 1.2 [length 0010]
(15) eap_peap: TLS_accept: SSLv3 read finished A
(15) eap_peap: >>> send TLS 1.2 [length 0001]
(15) eap_peap: TLS_accept: SSLv3 write change cipher spec A
(15) eap_peap: >>> send TLS 1.2 [length 0010]
(15) eap_peap: TLS_accept: SSLv3 write finished A
(15) eap_peap: TLS_accept: SSLv3 flush data
(15) eap_peap: (other): SSL negotiation finished successfully
(15) eap_peap: SSL Connection Established
(15) eap_peap: [eaptls process] = handled
(15) eap: Sending EAP Request (code 1) ID 211 length 57
(15) eap: EAP session adding &reply:State = 0x13b4f8c81667e10c
(15) [eap] = handled
(15) } # authenticate = handled
(15) Using Post-Auth-Type Challenge
(15) # Executing group from file /etc/raddb/sites-enabled/default
(15) Challenge { ... } # empty sub-section is ignored
(15) Sent Access-Challenge Id 15 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(15) EAP-Message = 0x01d3003919001403030001011603030028c4d6cba0b48752b4673199c19d6aadd4b7ef802d79b2977018b55347e106ae975f42a0bae3224e60
(15) Message-Authenticator = 0x00000000000000000000000000000000
(15) State = 0x13b4f8c81667e10caef2d3fb04d37962
(15) Finished request
Waking up in 4.8 seconds.
(16) Received Access-Request Id 16 from X.X.X.X:51991 to X.X.X.X:1812 length 270
(16) User-Name = "robert_plestenjak"
(16) NAS-IP-Address = X.X.X.X
(16) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(16) NAS-Port-Type = Wireless-802.11
(16) Service-Type = Framed-User
(16) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(16) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(16) Acct-Session-Id = "6325D4B9D8CD9D01"
(16) Acct-Multi-Session-Id = "33B691AA5B968946"
(16) WLAN-Pairwise-Cipher = 1027076
(16) WLAN-Group-Cipher = 1027076
(16) WLAN-AKM-Suite = 1027073
(16) Meraki-Device-Name = "olai"
(16) Framed-MTU = 1400
(16) EAP-Message = 0x02d300061900
(16) State = 0x13b4f8c81667e10caef2d3fb04d37962
(16) Message-Authenticator = 0x8a8f5afa9a3ca20b6a6e02804b573aeb
(16) session-state: No cached attributes
(16) # Executing section authorize from file /etc/raddb/sites-enabled/default
(16) authorize {
(16) policy filter_username {
(16) if (&User-Name) {
(16) if (&User-Name) -> TRUE
(16) if (&User-Name) {
(16) if (&User-Name =~ / /) {
(16) if (&User-Name =~ / /) -> FALSE
(16) if (&User-Name =~ /@[^@]*@/ ) {
(16) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(16) if (&User-Name =~ /\.\./ ) {
(16) if (&User-Name =~ /\.\./ ) -> FALSE
(16) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(16) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(16) if (&User-Name =~ /\.$/) {
(16) if (&User-Name =~ /\.$/) -> FALSE
(16) if (&User-Name =~ /@\./) {
(16) if (&User-Name =~ /@\./) -> FALSE
(16) } # if (&User-Name) = notfound
(16) } # policy filter_username = notfound
(16) [preprocess] = ok
(16) [chap] = noop
(16) [mschap] = noop
(16) [digest] = noop
(16) suffix: Checking for suffix after "@"
(16) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(16) suffix: No such realm "NULL"
(16) [suffix] = noop
(16) eap: Peer sent EAP Response (code 2) ID 211 length 6
(16) eap: Continuing tunnel setup
(16) [eap] = ok
(16) } # authorize = ok
(16) Found Auth-Type = eap
(16) # Executing group from file /etc/raddb/sites-enabled/default
(16) authenticate {
(16) eap: Expiring EAP session with state 0x13b4f8c81667e10c
(16) eap: Finished EAP session with state 0x13b4f8c81667e10c
(16) eap: Previous EAP request found for state 0x13b4f8c81667e10c, released from the list
(16) eap: Peer sent packet with method EAP PEAP (25)
(16) eap: Calling submodule eap_peap to process data
(16) eap_peap: Continuing EAP-TLS
(16) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(16) eap_peap: [eaptls verify] = success
(16) eap_peap: [eaptls process] = success
(16) eap_peap: Session established. Decoding tunneled attributes
(16) eap_peap: PEAP state TUNNEL ESTABLISHED
(16) eap: Sending EAP Request (code 1) ID 212 length 40
(16) eap: EAP session adding &reply:State = 0x13b4f8c81560e10c
(16) [eap] = handled
(16) } # authenticate = handled
(16) Using Post-Auth-Type Challenge
(16) # Executing group from file /etc/raddb/sites-enabled/default
(16) Challenge { ... } # empty sub-section is ignored
(16) Sent Access-Challenge Id 16 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(16) EAP-Message = 0x01d400281900170303001dc4d6cba0b48752b596fbd582271ba5144d0b07e037cdeb3c8872832bf8
(16) Message-Authenticator = 0x00000000000000000000000000000000
(16) State = 0x13b4f8c81560e10caef2d3fb04d37962
(16) Finished request
Waking up in 4.8 seconds.
(17) Received Access-Request Id 17 from X.X.X.X:51991 to X.X.X.X:1812 length 317
(17) User-Name = "robert_plestenjak"
(17) NAS-IP-Address = X.X.X.X
(17) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(17) NAS-Port-Type = Wireless-802.11
(17) Service-Type = Framed-User
(17) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(17) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(17) Acct-Session-Id = "6325D4B9D8CD9D01"
(17) Acct-Multi-Session-Id = "33B691AA5B968946"
(17) WLAN-Pairwise-Cipher = 1027076
(17) WLAN-Group-Cipher = 1027076
(17) WLAN-AKM-Suite = 1027073
(17) Meraki-Device-Name = "olai"
(17) Framed-MTU = 1400
(17) EAP-Message = 0x02d400351900170303002a0000000000000001d156dcb306795b1a5490d8115263cc725c1acd8c76588e31d9d4d985562c98bda7f5
(17) State = 0x13b4f8c81560e10caef2d3fb04d37962
(17) Message-Authenticator = 0xdffaa6c92233672ac826e8759d82c057
(17) session-state: No cached attributes
(17) # Executing section authorize from file /etc/raddb/sites-enabled/default
(17) authorize {
(17) policy filter_username {
(17) if (&User-Name) {
(17) if (&User-Name) -> TRUE
(17) if (&User-Name) {
(17) if (&User-Name =~ / /) {
(17) if (&User-Name =~ / /) -> FALSE
(17) if (&User-Name =~ /@[^@]*@/ ) {
(17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(17) if (&User-Name =~ /\.\./ ) {
(17) if (&User-Name =~ /\.\./ ) -> FALSE
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(17) if (&User-Name =~ /\.$/) {
(17) if (&User-Name =~ /\.$/) -> FALSE
(17) if (&User-Name =~ /@\./) {
(17) if (&User-Name =~ /@\./) -> FALSE
(17) } # if (&User-Name) = notfound
(17) } # policy filter_username = notfound
(17) [preprocess] = ok
(17) [chap] = noop
(17) [mschap] = noop
(17) [digest] = noop
(17) suffix: Checking for suffix after "@"
(17) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(17) suffix: No such realm "NULL"
(17) [suffix] = noop
(17) eap: Peer sent EAP Response (code 2) ID 212 length 53
(17) eap: Continuing tunnel setup
(17) [eap] = ok
(17) } # authorize = ok
(17) Found Auth-Type = eap
(17) # Executing group from file /etc/raddb/sites-enabled/default
(17) authenticate {
(17) eap: Expiring EAP session with state 0x13b4f8c81560e10c
(17) eap: Finished EAP session with state 0x13b4f8c81560e10c
(17) eap: Previous EAP request found for state 0x13b4f8c81560e10c, released from the list
(17) eap: Peer sent packet with method EAP PEAP (25)
(17) eap: Calling submodule eap_peap to process data
(17) eap_peap: Continuing EAP-TLS
(17) eap_peap: [eaptls verify] = ok
(17) eap_peap: Done initial handshake
(17) eap_peap: [eaptls process] = ok
(17) eap_peap: Session established. Decoding tunneled attributes
(17) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(17) eap_peap: Identity - robert_plestenjak
(17) eap_peap: Got inner identity 'robert_plestenjak'
(17) eap_peap: Setting default EAP type for tunneled EAP session
(17) eap_peap: Got tunneled request
(17) eap_peap: EAP-Message = 0x02d4001601726f626572745f706c657374656e6a616b
(17) eap_peap: Setting User-Name to robert_plestenjak
(17) eap_peap: Sending tunneled request to inner-tunnel
(17) eap_peap: EAP-Message = 0x02d4001601726f626572745f706c657374656e6a616b
(17) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(17) eap_peap: User-Name = "robert_plestenjak"
(17) Virtual server inner-tunnel received request
(17) EAP-Message = 0x02d4001601726f626572745f706c657374656e6a616b
(17) FreeRADIUS-Proxied-To = 127.0.0.1
(17) User-Name = "robert_plestenjak"
(17) WARNING: Outer and inner identities are the same. User privacy is compromised.
(17) server inner-tunnel {
(17) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(17) authorize {
(17) policy filter_username {
(17) if (&User-Name) {
(17) if (&User-Name) -> TRUE
(17) if (&User-Name) {
(17) if (&User-Name =~ / /) {
(17) if (&User-Name =~ / /) -> FALSE
(17) if (&User-Name =~ /@[^@]*@/ ) {
(17) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(17) if (&User-Name =~ /\.\./ ) {
(17) if (&User-Name =~ /\.\./ ) -> FALSE
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(17) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(17) if (&User-Name =~ /\.$/) {
(17) if (&User-Name =~ /\.$/) -> FALSE
(17) if (&User-Name =~ /@\./) {
(17) if (&User-Name =~ /@\./) -> FALSE
(17) } # if (&User-Name) = notfound
(17) } # policy filter_username = notfound
(17) [chap] = noop
(17) [mschap] = noop
(17) suffix: Checking for suffix after "@"
(17) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(17) suffix: No such realm "NULL"
(17) [suffix] = noop
(17) update control {
(17) &Proxy-To-Realm := LOCAL
(17) } # update control = noop
(17) eap: Peer sent EAP Response (code 2) ID 212 length 22
(17) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(17) [eap] = ok
(17) } # authorize = ok
(17) Found Auth-Type = eap
(17) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(17) authenticate {
(17) eap: Peer sent packet with method EAP Identity (1)
(17) eap: Calling submodule eap_mschapv2 to process data
(17) eap_mschapv2: Issuing Challenge
(17) eap: Sending EAP Request (code 1) ID 213 length 43
(17) eap: EAP session adding &reply:State = 0x8f45c9568f90d385
(17) [eap] = handled
(17) } # authenticate = handled
(17) } # server inner-tunnel
(17) Virtual server sending reply
(17) EAP-Message = 0x01d5002b1a01d50026103481537f998fa1371fd68721d06fd7c1667265657261646975732d332e302e3133
(17) Message-Authenticator = 0x00000000000000000000000000000000
(17) State = 0x8f45c9568f90d3857e52bda50653607d
(17) eap_peap: Got tunneled reply code 11
(17) eap_peap: EAP-Message = 0x01d5002b1a01d50026103481537f998fa1371fd68721d06fd7c1667265657261646975732d332e302e3133
(17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(17) eap_peap: State = 0x8f45c9568f90d3857e52bda50653607d
(17) eap_peap: Got tunneled reply RADIUS code 11
(17) eap_peap: EAP-Message = 0x01d5002b1a01d50026103481537f998fa1371fd68721d06fd7c1667265657261646975732d332e302e3133
(17) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(17) eap_peap: State = 0x8f45c9568f90d3857e52bda50653607d
(17) eap_peap: Got tunneled Access-Challenge
(17) eap: Sending EAP Request (code 1) ID 213 length 74
(17) eap: EAP session adding &reply:State = 0x13b4f8c81461e10c
(17) [eap] = handled
(17) } # authenticate = handled
(17) Using Post-Auth-Type Challenge
(17) # Executing group from file /etc/raddb/sites-enabled/default
(17) Challenge { ... } # empty sub-section is ignored
(17) Sent Access-Challenge Id 17 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(17) EAP-Message = 0x01d5004a1900170303003fc4d6cba0b48752b678685a1c20d35c1495eeb8b7b68d48af7559cb23b1794638500578a62c50725d1c13f70559dd2ab4ccbc5f333da3c269bb54861de08c5d
(17) Message-Authenticator = 0x00000000000000000000000000000000
(17) State = 0x13b4f8c81461e10caef2d3fb04d37962
(17) Finished request
Waking up in 4.8 seconds.
(18) Received Access-Request Id 18 from X.X.X.X:51991 to X.X.X.X:1812 length 371
(18) User-Name = "robert_plestenjak"
(18) NAS-IP-Address = X.X.X.X
(18) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(18) NAS-Port-Type = Wireless-802.11
(18) Service-Type = Framed-User
(18) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(18) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(18) Acct-Session-Id = "6325D4B9D8CD9D01"
(18) Acct-Multi-Session-Id = "33B691AA5B968946"
(18) WLAN-Pairwise-Cipher = 1027076
(18) WLAN-Group-Cipher = 1027076
(18) WLAN-AKM-Suite = 1027073
(18) Meraki-Device-Name = "olai"
(18) Framed-MTU = 1400
(18) EAP-Message = 0x02d5006b1900170303006000000000000000020c47825d8d203487343c1cb7cf937baaa3da3ec65947d11d4899785cfde46b828ddf938c7d8be000eeaa66195bd54d33f0cac081834d0215acdfd165302a9c12f09e8c2df780ccda3057bcbf23228b4b9817ae6a78a96c2c
(18) State = 0x13b4f8c81461e10caef2d3fb04d37962
(18) Message-Authenticator = 0x542d7969f2658b6f35989a19866db2dc
(18) session-state: No cached attributes
(18) # Executing section authorize from file /etc/raddb/sites-enabled/default
(18) authorize {
(18) policy filter_username {
(18) if (&User-Name) {
(18) if (&User-Name) -> TRUE
(18) if (&User-Name) {
(18) if (&User-Name =~ / /) {
(18) if (&User-Name =~ / /) -> FALSE
(18) if (&User-Name =~ /@[^@]*@/ ) {
(18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(18) if (&User-Name =~ /\.\./ ) {
(18) if (&User-Name =~ /\.\./ ) -> FALSE
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(18) if (&User-Name =~ /\.$/) {
(18) if (&User-Name =~ /\.$/) -> FALSE
(18) if (&User-Name =~ /@\./) {
(18) if (&User-Name =~ /@\./) -> FALSE
(18) } # if (&User-Name) = notfound
(18) } # policy filter_username = notfound
(18) [preprocess] = ok
(18) [chap] = noop
(18) [mschap] = noop
(18) [digest] = noop
(18) suffix: Checking for suffix after "@"
(18) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(18) suffix: No such realm "NULL"
(18) [suffix] = noop
(18) eap: Peer sent EAP Response (code 2) ID 213 length 107
(18) eap: Continuing tunnel setup
(18) [eap] = ok
(18) } # authorize = ok
(18) Found Auth-Type = eap
(18) # Executing group from file /etc/raddb/sites-enabled/default
(18) authenticate {
(18) eap: Expiring EAP session with state 0x8f45c9568f90d385
(18) eap: Finished EAP session with state 0x13b4f8c81461e10c
(18) eap: Previous EAP request found for state 0x13b4f8c81461e10c, released from the list
(18) eap: Peer sent packet with method EAP PEAP (25)
(18) eap: Calling submodule eap_peap to process data
(18) eap_peap: Continuing EAP-TLS
(18) eap_peap: [eaptls verify] = ok
(18) eap_peap: Done initial handshake
(18) eap_peap: [eaptls process] = ok
(18) eap_peap: Session established. Decoding tunneled attributes
(18) eap_peap: PEAP state phase2
(18) eap_peap: EAP method MSCHAPv2 (26)
(18) eap_peap: Got tunneled request
(18) eap_peap: EAP-Message = 0x02d5004c1a02d5004731d8d694eb0e711635a2a5c6d011d44414000000000000000080648d3803f60d505ec6b8f76843d49dd4a6a7854eee97fa00726f626572745f706c657374656e6a616b
(18) eap_peap: Setting User-Name to robert_plestenjak
(18) eap_peap: Sending tunneled request to inner-tunnel
(18) eap_peap: EAP-Message = 0x02d5004c1a02d5004731d8d694eb0e711635a2a5c6d011d44414000000000000000080648d3803f60d505ec6b8f76843d49dd4a6a7854eee97fa00726f626572745f706c657374656e6a616b
(18) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(18) eap_peap: User-Name = "robert_plestenjak"
(18) eap_peap: State = 0x8f45c9568f90d3857e52bda50653607d
(18) Virtual server inner-tunnel received request
(18) EAP-Message = 0x02d5004c1a02d5004731d8d694eb0e711635a2a5c6d011d44414000000000000000080648d3803f60d505ec6b8f76843d49dd4a6a7854eee97fa00726f626572745f706c657374656e6a616b
(18) FreeRADIUS-Proxied-To = 127.0.0.1
(18) User-Name = "robert_plestenjak"
(18) State = 0x8f45c9568f90d3857e52bda50653607d
(18) WARNING: Outer and inner identities are the same. User privacy is compromised.
(18) server inner-tunnel {
(18) session-state: No cached attributes
(18) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel
(18) authorize {
(18) policy filter_username {
(18) if (&User-Name) {
(18) if (&User-Name) -> TRUE
(18) if (&User-Name) {
(18) if (&User-Name =~ / /) {
(18) if (&User-Name =~ / /) -> FALSE
(18) if (&User-Name =~ /@[^@]*@/ ) {
(18) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(18) if (&User-Name =~ /\.\./ ) {
(18) if (&User-Name =~ /\.\./ ) -> FALSE
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(18) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(18) if (&User-Name =~ /\.$/) {
(18) if (&User-Name =~ /\.$/) -> FALSE
(18) if (&User-Name =~ /@\./) {
(18) if (&User-Name =~ /@\./) -> FALSE
(18) } # if (&User-Name) = notfound
(18) } # policy filter_username = notfound
(18) [chap] = noop
(18) [mschap] = noop
(18) suffix: Checking for suffix after "@"
(18) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(18) suffix: No such realm "NULL"
(18) [suffix] = noop
(18) update control {
(18) &Proxy-To-Realm := LOCAL
(18) } # update control = noop
(18) eap: Peer sent EAP Response (code 2) ID 213 length 76
(18) eap: No EAP Start, assuming it's an on-going EAP conversation
(18) [eap] = updated
(18) [files] = noop
rlm_ldap (ldap): Reserved connection (3)
(18) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(18) ldap: --> (uid=robert_plestenjak)
(18) ldap: Performing search in "dc=xlab,dc=si" with filter "(uid=robert_plestenjak)", scope "sub"
(18) ldap: Waiting for search result...
(18) ldap: User object found at DN "cn=Robert Plestenjak,ou=people,ou=xlab-research,dc=xlab,dc=si"
(18) ldap: Processing user attributes
(18) ldap: control:Password-With-Header += 'XXX'
rlm_ldap (ldap): Released connection (3)
(18) [ldap] = updated
(18) [expiration] = noop
(18) [logintime] = noop
(18) pap: No {...} in Password-With-Header, re-writing to Cleartext-Password
(18) pap: Removing &control:Password-With-Header
(18) pap: WARNING: Auth-Type already set. Not setting to PAP
(18) [pap] = noop
(18) } # authorize = updated
(18) Found Auth-Type = eap
(18) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(18) authenticate {
(18) eap: Expiring EAP session with state 0x8f45c9568f90d385
(18) eap: Finished EAP session with state 0x8f45c9568f90d385
(18) eap: Previous EAP request found for state 0x8f45c9568f90d385, released from the list
(18) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(18) eap: Calling submodule eap_mschapv2 to process data
(18) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(18) eap_mschapv2: authenticate {
(18) mschap: Found Cleartext-Password, hashing to create NT-Password
(18) mschap: Found Cleartext-Password, hashing to create LM-Password
(18) mschap: Creating challenge hash with username: robert_plestenjak
(18) mschap: Client is using MS-CHAPv2
(18) mschap: ERROR: MS-CHAP2-Response is incorrect
(18) [mschap] = reject
(18) } # authenticate = reject
(18) eap: Sending EAP Failure (code 4) ID 213 length 4
(18) eap: Freeing handler
(18) [eap] = reject
(18) } # authenticate = reject
(18) Failed to authenticate the user
(18) Using Post-Auth-Type Reject
(18) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(18) Post-Auth-Type REJECT {
(18) attr_filter.access_reject: EXPAND %{User-Name}
(18) attr_filter.access_reject: --> robert_plestenjak
(18) attr_filter.access_reject: Matched entry DEFAULT at line 11
(18) [attr_filter.access_reject] = updated
(18) update outer.session-state {
(18) &Module-Failure-Message := &request:Module-Failure-Message -> 'mschap: MS-CHAP2-Response is incorrect'
(18) } # update outer.session-state = noop
(18) } # Post-Auth-Type REJECT = updated
(18) } # server inner-tunnel
(18) Virtual server sending reply
(18) MS-CHAP-Error = "\325E=691 R=1 C=2ca3a2ed3d4ef46ebff14aded477265f V=3 M=Authentication failed"
(18) EAP-Message = 0x04d50004
(18) Message-Authenticator = 0x00000000000000000000000000000000
(18) eap_peap: Got tunneled reply code 3
(18) eap_peap: MS-CHAP-Error = "\325E=691 R=1 C=2ca3a2ed3d4ef46ebff14aded477265f V=3 M=Authentication failed"
(18) eap_peap: EAP-Message = 0x04d50004
(18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(18) eap_peap: Got tunneled reply RADIUS code 3
(18) eap_peap: MS-CHAP-Error = "\325E=691 R=1 C=2ca3a2ed3d4ef46ebff14aded477265f V=3 M=Authentication failed"
(18) eap_peap: EAP-Message = 0x04d50004
(18) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(18) eap_peap: Tunneled authentication was rejected
(18) eap_peap: FAILURE
(18) eap: Sending EAP Request (code 1) ID 214 length 46
(18) eap: EAP session adding &reply:State = 0x13b4f8c81b62e10c
(18) [eap] = handled
(18) } # authenticate = handled
(18) Using Post-Auth-Type Challenge
(18) # Executing group from file /etc/raddb/sites-enabled/default
(18) Challenge { ... } # empty sub-section is ignored
(18) session-state: Saving cached attributes
(18) Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect"
(18) Sent Access-Challenge Id 18 from X.X.X.X:1812 to X.X.X.X:51991 length 0
(18) EAP-Message = 0x01d6002e19001703030023c4d6cba0b48752b7f8f87842178ba52177865f6c1cef5524f872ed8897901cb80d3a00
(18) Message-Authenticator = 0x00000000000000000000000000000000
(18) State = 0x13b4f8c81b62e10caef2d3fb04d37962
(18) Finished request
Waking up in 4.8 seconds.
(19) Received Access-Request Id 19 from X.X.X.X:51991 to X.X.X.X:1812 length 310
(19) User-Name = "robert_plestenjak"
(19) NAS-IP-Address = X.X.X.X
(19) Called-Station-Id = "82-15-44-A9-EB-44:Blubber"
(19) NAS-Port-Type = Wireless-802.11
(19) Service-Type = Framed-User
(19) Calling-Station-Id = "18-F0-E4-3B-AA-02"
(19) Connect-Info = "CONNECT 54.00 Mbps, 802.11n, RSSI: 44, Channel: 1"
(19) Acct-Session-Id = "6325D4B9D8CD9D01"
(19) Acct-Multi-Session-Id = "33B691AA5B968946"
(19) WLAN-Pairwise-Cipher = 1027076
(19) WLAN-Group-Cipher = 1027076
(19) WLAN-AKM-Suite = 1027073
(19) Meraki-Device-Name = "olai"
(19) Framed-MTU = 1400
(19) EAP-Message = 0x02d6002e19001703030023000000000000000308fa96363a074f0d6a71b51ac3f369d6bb554270c5c198b63ca951
(19) State = 0x13b4f8c81b62e10caef2d3fb04d37962
(19) Message-Authenticator = 0xb04cbd1a88e53186c391121c6b9f62b1
(19) Restoring &session-state
(19) &session-state:Module-Failure-Message := "mschap: MS-CHAP2-Response is incorrect"
(19) # Executing section authorize from file /etc/raddb/sites-enabled/default
(19) authorize {
(19) policy filter_username {
(19) if (&User-Name) {
(19) if (&User-Name) -> TRUE
(19) if (&User-Name) {
(19) if (&User-Name =~ / /) {
(19) if (&User-Name =~ / /) -> FALSE
(19) if (&User-Name =~ /@[^@]*@/ ) {
(19) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(19) if (&User-Name =~ /\.\./ ) {
(19) if (&User-Name =~ /\.\./ ) -> FALSE
(19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(19) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(19) if (&User-Name =~ /\.$/) {
(19) if (&User-Name =~ /\.$/) -> FALSE
(19) if (&User-Name =~ /@\./) {
(19) if (&User-Name =~ /@\./) -> FALSE
(19) } # if (&User-Name) = notfound
(19) } # policy filter_username = notfound
(19) [preprocess] = ok
(19) [chap] = noop
(19) [mschap] = noop
(19) [digest] = noop
(19) suffix: Checking for suffix after "@"
(19) suffix: No '@' in User-Name = "robert_plestenjak", looking up realm NULL
(19) suffix: No such realm "NULL"
(19) [suffix] = noop
(19) eap: Peer sent EAP Response (code 2) ID 214 length 46
(19) eap: Continuing tunnel setup
(19) [eap] = ok
(19) } # authorize = ok
(19) Found Auth-Type = eap
(19) # Executing group from file /etc/raddb/sites-enabled/default
(19) authenticate {
(19) eap: Expiring EAP session with state 0x13b4f8c81b62e10c
(19) eap: Finished EAP session with state 0x13b4f8c81b62e10c
(19) eap: Previous EAP request found for state 0x13b4f8c81b62e10c, released from the list
(19) eap: Peer sent packet with method EAP PEAP (25)
(19) eap: Calling submodule eap_peap to process data
(19) eap_peap: Continuing EAP-TLS
(19) eap_peap: [eaptls verify] = ok
(19) eap_peap: Done initial handshake
(19) eap_peap: [eaptls process] = ok
(19) eap_peap: Session established. Decoding tunneled attributes
(19) eap_peap: PEAP state send tlv failure
(19) eap_peap: Received EAP-TLV response
(19) eap_peap: ERROR: The users session was previously rejected: returning reject (again.)
(19) eap_peap: This means you need to read the PREVIOUS messages in the debug output
(19) eap_peap: to find out the reason why the user was rejected
(19) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you
(19) eap_peap: what went wrong, and how to fix the problem
(19) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
(19) eap: Sending EAP Failure (code 4) ID 214 length 4
(19) eap: Failed in EAP select
(19) [eap] = invalid
(19) } # authenticate = invalid
(19) Failed to authenticate the user
(19) Using Post-Auth-Type Reject
(19) # Executing group from file /etc/raddb/sites-enabled/default
(19) Post-Auth-Type REJECT {
(19) attr_filter.access_reject: EXPAND %{User-Name}
(19) attr_filter.access_reject: --> robert_plestenjak
(19) attr_filter.access_reject: Matched entry DEFAULT at line 11
(19) [attr_filter.access_reject] = updated
(19) [eap] = noop
(19) policy remove_reply_message_if_eap {
(19) if (&reply:EAP-Message && &reply:Reply-Message) {
(19) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(19) else {
(19) [noop] = noop
(19) } # else = noop
(19) } # policy remove_reply_message_if_eap = noop
(19) } # Post-Auth-Type REJECT = updated
(19) Delaying response for 1.000000 seconds
Waking up in 0.6 seconds.
Waking up in 0.3 seconds.
(19) Sending delayed response
(19) Sent Access-Reject Id 19 from X.X.X.X:1812 to X.X.X.X:51991 length 44
(19) EAP-Message = 0x04d60004
(19) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 3.8 seconds.
(10) Cleaning up request packet ID 10 with timestamp +25
(11) Cleaning up request packet ID 11 with timestamp +25
(12) Cleaning up request packet ID 12 with timestamp +25
(13) Cleaning up request packet ID 13 with timestamp +25
(14) Cleaning up request packet ID 14 with timestamp +25
(15) Cleaning up request packet ID 15 with timestamp +25
(16) Cleaning up request packet ID 16 with timestamp +25
(17) Cleaning up request packet ID 17 with timestamp +25
(18) Cleaning up request packet ID 18 with timestamp +25
(19) Cleaning up request packet ID 19 with timestamp +25
Ready to process requests
More information about the Freeradius-Users
mailing list