Post-Auth LDAP with computer names rather than usernames

Fri Oct 19 22:06:38 CEST 2018

I currently have dynamic vlans working with post-auth user authentication but my boss would like to do it based off computer name. I have searched and become a little confused as how to proceed. In the LDAP conf do I change stripped username to stripped computer name or is it more complicated than that?

________________________________
From: Freeradius-Users <freeradius-users-bounces+kevin.virk=faithlife.com at lists.freeradius.org> on behalf of freeradius-users-request at lists.freeradius.org <freeradius-users-request at lists.freeradius.org>
Sent: Monday, September 3, 2018 10:19 AM
To: freeradius-users at lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 161, Issue 2

Send Freeradius-Users mailing list submissions to
freeradius-users at lists.freeradius.org

To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freeradius.org/mailman/listinfo/freeradius-users<http://lists.freeradius.org/mailman/listinfo/freeradius-users>
or, via email, send a message with subject or body 'help' to
freeradius-users-request at lists.freeradius.org

You can reach the person managing the list at
freeradius-users-owner at lists.freeradius.org

When replying, please edit your Subject line so it is more specific
than "Re: Contents of Freeradius-Users digest..."

Today's Topics:

1. Re: VLan affect based on ldap attribute freeradius v3
(jehan procaccia INT)
2. rlm_sql not checking radgroupreply (tomas.meier at fettabernett.de)

----------------------------------------------------------------------

Message: 1
Date: Mon, 3 Sep 2018 16:04:11 +0200
From: jehan procaccia INT <jehan.procaccia at int-evry.fr>
To: FreeRadius users mailing list
<Freeradius-Users at lists.freeradius.org>
Cc: aland at deployingradius.com, Christophe GABORET
<Christophe.Gaboret at tem-tsp.eu>
Subject: Re: VLan affect based on ldap attribute freeradius v3
Message-ID: <f6b5995f-5959-a196-5bb0-513525683e5a at int-evry.fr>
Content-Type: text/plain; charset=utf-8

Hello sucessfull reponses below ...

Le 31/08/2018 à 14:59, Alan DeKok a écrit :
>> On Aug 31, 2018, at 4:45 AM, jehan procaccia INT
>> <jehan.procaccia at int-evry.fr> wrote:
>>
>> unfortunatly it fails, User-Category attribute fetch from ldap
>> edupersonPrimaryAffiliation doesn't pass though different
>> states/modules apparently
> Yes, it does. You should be able to tell what's going on by reading
> the debug output. *Or* by posting the ENTIRE debug output here, and
> letting someone else read it.
>
> You're falling into a common trap. You're trying all kinds of random
> things. Without really understanding what's going on, or why.
> You're posting *small* bits of the debug output, in the hope that
> those bits are useful.
>
> They're not.
>
> Post the FULL DEBUG OUTPUT.
>
> And make sure it's for ONE USER. We're not going to read through
> thousands of lines of logs about accounting packets, in order to
> solve an authentication issue.
you're right, after a weekend reading thouroughly
http://networkradius.com/doc/FreeRADIUS Technical Guide.pdf<http://networkradius.com/doc/FreeRADIUS Technical Guide.pdf> and wiki
thingsget better now , althought it's not easy to get a single user
debug output from production .
fortunatly you gave me the right answer with

"use_tunneled_reply = yes"

adding that not only (which was already set) to mods-enabled/eap section:
eap { ttls {
but moreover to peap {
which is our prevalent method used, now makes the attribute correctly
flowed in the process

chapter 4.3 of the tech guide is important to understand the iteractive
/ recursive processing of the configuration sections and modules . the
debug output seems very repetitive whitout that and
https://wiki.freeradius.org/guide/radiusd-X<https://wiki.freeradius.org/guide/radiusd-X> helps a lot to .

thanks for your help , now it work fine ;-)

Regards

PS my connection as an employee (ldap) and associated vlan accordingly :

(86) prod: reply:Reply-Message := 'employee'
(86) prod: reply:User-Category += 'employee'

(86) Virtual server sending reply
(86) Reply-Message := "employee"
(86) User-Category += "employee"

(86) eap_peap: Got tunneled reply RADIUS code 2
(86) eap_peap: Reply-Message := "employee"
(86) eap_peap: User-Category += "employee"

(88) eap_peap: Using saved attributes from the original Access-Accept
(88) eap_peap: Reply-Message := "employee"
(88) eap_peap: User-Category += "employee"

(88) [eap] = ok
(88) } # authenticate = ok
(88) # Executing section post-auth from file
/etc/raddb/sites-enabled/default
(88) post-auth {
(88) update {
(88) No attributes updated
(88) } # update = noop
(88) reply_log: EXPAND
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d
(88) reply_log: -->
/var/log/radius/radacct/10.91.10.10/reply-detail-20180903
(88) reply_log:
/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d

(88) reply_log: EXPAND %t
(88) reply_log: --> Mon Sep 3 09:24:23 2018
(88) [reply_log] = ok
(88) [exec] = noop
(88) policy remove_reply_message_if_eap {
(88) if (&reply:EAP-Message && &reply:Reply-Message) {
(88) if (&reply:EAP-Message && &reply:Reply-Message) -> TRUE
(88) if (&reply:EAP-Message && &reply:Reply-Message) {
(88) update reply {
(88) &Reply-Message !* ANY
(88) } # update reply = noop
(88) } # if (&reply:EAP-Message && &reply:Reply-Message) = noop
(88) ... skipping else: Preceding "if" was taken
(88) } # policy remove_reply_message_if_eap = noop

(88) policy debug_reply {
(88) if ("%{debug_attr:reply:}" == '') {
(88) Attributes matching "reply:"
(88) &reply:User-Category += employee
(88) &reply:Stripped-User-Name = procacci

(88) if ("%{debug_attr:reply:}" == '') -> TRUE
(88) if ("%{debug_attr:reply:}" == '') {
(88) [noop] = noop
(88) } # if ("%{debug_attr:reply:}" == '') = noop
(88) } # policy debug_reply = noop
(88) if (( &reply:User-Category == "employee") ||
(&reply:User-Category == "faculty") || (&reply:User-Category == "staff"
) || (&reply:User-Category == "researcher") || (&reply:User-Category ==
"member")) {
(88) if (( &reply:User-Category == "employee") ||
(&reply:User-Category == "faculty") || (&reply:User-Category == "staff"
) || (&reply:User-Category == "researcher") || (&reply:User-Category ==
"member")) -> TRUE
(88) if (( &reply:User-Category == "employee") ||
(&reply:User-Category == "faculty") || (&reply:User-Category == "staff"
) || (&reply:User-Category == "researcher") || (&reply:User-Category ==
"member")) {
(88) update reply {
(88) Tunnel-Private-Group-Id := 903

>
>> even with the usage of session-state (replacing "reply") it fails
>>
>> here's a new radiusd -X experiment :
>>
>> 1) ldap does find the attribute and associated value (here
>> employee)
>>
>> rlm_ldap (prod): Reserved connection (7) (93) prod:
>> reply:Reply-Message := 'employee' (93) prod: reply:User-Category +=
>> 'employee'
>>
>> 2) eap-peap has it
>>
>> (93) post-auth { (93) if (0) { (93) if (0) ->
>> FALSE (93) } # post-auth = noop (93) Login OK: [radu/<via
>> Auth-Type = eap>] (from client prod port 0 via TLS tunnel) (93) } #
>> server inner-tunnel (93) Virtual server sending reply (93)
>> Reply-Message := "employee" (93) *User-Category += "employee"*
>> (93) eap_peap: Got tunneled reply code 2 (93) eap_peap:
>> Reply-Message := "employee" (93) eap_peap: *User-Category +=
>> "employee"*
> Note that's all in packet 93. AND in the "inner tunnel" virtual
> server.
>
>> 3) eap_peap is success
>>
>> (94)*eap_peap: Success*
> Which is packet 94. Note that "94" is NOT THE SAME as "93".
>
> i.e. it's a different packet. So unless you made sure to get the
> attribute from packet 93 inner tunnel reply to packet 94 outer
> reply... the attribute won't be in packet 94.
>
>> should I see something like &reply:User-Category above
> No.
>
>> ? not been present means it's already lost ?
> It hasn't been lost.
>
> All you need to do is read mods-available/eap, and set
> "use_tunneled_reply = yes". And read the comments for that
> configuration item. They explain what it is, why you need it, and
> when you want to use it.
>
> Alan DeKok.
>
>
> - List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html<http://www.freeradius.org/list/users.html>

------------------------------

Message: 2
Date: Mon, 3 Sep 2018 19:18:59 +0200
From: tomas.meier at fettabernett.de
To: freeradius-users at lists.freeradius.org
Subject: rlm_sql not checking radgroupreply
Message-ID:
<trinity-fc960aa8-16ac-446d-81e3-a3045449cc19-1535995139876 at 3c-app-gmx-bs44>

Content-Type: text/plain; charset="UTF-8"

Hello,

I am using FreeRADIUS 3.0.17 in a MySQL setup that seems to not check
radgroupreply.
"radtest" gets user attributes but does not receive attributes of
associated group at all.

Complete debug output of radiusd -X:

FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/local/share/freeradius/dictionary
including dictionary file /usr/local/share/freeradius/dictionary.dhcp
including dictionary file /usr/local/share/freeradius/dictionary.vqp
including dictionary file /usr/local/etc/raddb/dictionary
including configuration file /usr/local/etc/raddb/radiusd.conf
including files in directory /usr/local/etc/raddb/mods-enabled/
including configuration file /usr/local/etc/raddb/mods-enabled/expr
including configuration file
/usr/local/etc/raddb/mods-enabled/expiration
including configuration file /usr/local/etc/raddb/mods-enabled/echo
including configuration file /usr/local/etc/raddb/mods-enabled/files
including configuration file /usr/local/etc/raddb/mods-enabled/pap
including configuration file /usr/local/etc/raddb/mods-enabled/soh
including configuration file /usr/local/etc/raddb/mods-enabled/utf8
including configuration file /usr/local/etc/raddb/mods-enabled/unix
including configuration file
/usr/local/etc/raddb/mods-enabled/cache_eap
including configuration file
/usr/local/etc/raddb/mods-enabled/detail.log
including configuration file /usr/local/etc/raddb/mods-enabled/date
including configuration file /usr/local/etc/raddb/mods-enabled/linelog
including configuration file /usr/local/etc/raddb/mods-enabled/unpack
including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
including configuration file /usr/local/etc/raddb/mods-enabled/exec
including configuration file /usr/local/etc/raddb/mods-enabled/always
including configuration file
/usr/local/etc/raddb/mods-enabled/logintime
including configuration file /usr/local/etc/raddb/mods-enabled/mschap
including configuration file
/usr/local/etc/raddb/mods-enabled/replicate
including configuration file /usr/local/etc/raddb/mods-enabled/eap
including configuration file /usr/local/etc/raddb/mods-enabled/detail
including configuration file /usr/local/etc/raddb/mods-enabled/digest
including configuration file
/usr/local/etc/raddb/mods-enabled/preprocess
including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
including configuration file /usr/local/etc/raddb/mods-enabled/chap
including configuration file
/usr/local/etc/raddb/mods-enabled/attr_filter
including configuration file /usr/local/etc/raddb/mods-enabled/sql
including configuration file
/usr/local/etc/raddb/mods-config/sql/main/sqlite/queries.conf
including configuration file /usr/local/etc/raddb/mods-enabled/realm
including files in directory /usr/local/etc/raddb/policy.d/
including configuration file /usr/local/etc/raddb/policy.d/filter
including configuration file
/usr/local/etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
including configuration file
/usr/local/etc/raddb/policy.d/canonicalization
including configuration file /usr/local/etc/raddb/policy.d/control
including configuration file /usr/local/etc/raddb/policy.d/debug
including configuration file
/usr/local/etc/raddb/policy.d/operator-name
including configuration file /usr/local/etc/raddb/policy.d/eap
including configuration file /usr/local/etc/raddb/policy.d/cui
including configuration file /usr/local/etc/raddb/policy.d/dhcp
including configuration file /usr/local/etc/raddb/policy.d/accounting
including files in directory /usr/local/etc/raddb/sites-enabled/
including configuration file /usr/local/etc/raddb/sites-enabled/default
including configuration file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr/local"
localstatedir = "/usr/local/var"
sbindir = "/usr/local/sbin"
logdir = "/usr/local/var/log/radius"
run_dir = "/usr/local/var/run/radiusd"
libdir = "/usr/local/lib"
radacctdir = "/usr/local/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
checkrad = "/usr/local/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
radiusd: #### Loading Clients ####
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_expr
# Loading module "expr" from file
/usr/local/etc/raddb/mods-enabled/expr
expr {
safe_characters =
"#@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
# Loaded module rlm_exec
# Loading module "echo" from file
/usr/local/etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_files
# Loading module "files" from file
/usr/local/etc/raddb/mods-enabled/files
files {
filename = "/usr/local/etc/raddb/mods-config/files/authorize"
acctusersfile =
"/usr/local/etc/raddb/mods-config/files/accounting"
preproxy_usersfile =
"/usr/local/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_pap
# Loading module "pap" from file
/usr/local/etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_soh
# Loading module "soh" from file
/usr/local/etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_utf8
# Loading module "utf8" from file
/usr/local/etc/raddb/mods-enabled/utf8
# Loaded module rlm_unix
# Loading module "unix" from file
/usr/local/etc/raddb/mods-enabled/unix
unix {
radwtmp = "/usr/local/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_cache
# Loading module "cache_eap" from file
/usr/local/etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_detail
# Loading module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet
-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet
-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet
-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet
-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_date
# Loading module "date" from file
/usr/local/etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
linelog {
filename = "/usr/local/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/usr/local/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference =
"Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_unpack
# Loading module "unpack" from file
/usr/local/etc/raddb/mods-enabled/unpack
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file
/usr/local/etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/usr/local/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loading module "exec" from file
/usr/local/etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_always
# Loading module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file
/usr/local/etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file
/usr/local/etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file
/usr/local/etc/raddb/mods-enabled/replicate
# Loaded module rlm_eap
# Loading module "eap" from file
/usr/local/etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loading module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
detail {
filename =
"/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet
-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file
/usr/local/etc/raddb/mods-enabled/digest
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups =
"/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loading module "radutmp" from file
/usr/local/etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/usr/local/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_chap
# Loading module "chap" from file
/usr/local/etc/raddb/mods-enabled/chap
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename =
"/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_sql
# Loading module "sql" from file
/usr/local/etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "sql.mydomain.de<http://sql.mydomain.de>"
port = 3306
login = "radius"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret,
server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value,
op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value,
op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute,
Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY
id"
authorize_group_reply_query = "SELECT id, groupname, attribute,
value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY
id"
group_membership_query = "SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid,
username, nasipaddress, nasportid, framedipaddress, callingstationid,
framedprotocol FROM radacct WHERE username = '%{SQL-Group}' AND
acctstoptime IS NULL"
safe_characters =
"#@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/"
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
(%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} -
strftime('%%s', acctstarttime)), acctterminatecause =
'%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress
= '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
(%{%{integer:Event-Timestamp}:-strftime('%%s', 'now')} -
strftime('%%s', acctstarttime)), acctterminatecause =
'%{Acct-Terminate-Cause}' WHERE acctstoptime IS NULL AND nasipaddress
= '%{NAS-IP-Address}' AND acctstarttime <= %{integer:Event-Timestamp}"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid,
username, realm, nasipaddress, nasportid, nasporttype, acctstarttime,
acctupdatetime, acctstoptime, acctsessiontime, acctauthentic,
connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets,
calledstationid, callingstationid, acctterminatecause, servicetype,
framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
'%{NAS-Port-Type}', %{%{integer:Event-Timestamp}:-date('now')},
%{%{integer:Event-Timestamp}:-date('now')}, NULL, '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime =
%{%{integer:Event-Timestamp}:-date('now')}, acctinterval = 0,
framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
%{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
%{%{Acct-Output-Octets}:-0} WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime =
%{%{integer:Event-Timestamp}:-date('now')}, acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
%{%{Acct-Input-Gigawords}:-0} << 32 | %{%{Acct-Input-Octets}:-0},
acctoutputoctets = %{%{Acct-Output-Gigawords}:-0} << 32 |
%{%{Acct-Output-Octets}:-0}, acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( '%{SQL-User-Name}',
'%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
linked
Creating attribute SQL-Group
# Loaded module rlm_realm
# Loading module "IPASS" from file
/usr/local/etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
instantiate {
}
# Instantiating module "expiration" from file
/usr/local/etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file
/usr/local/etc/raddb/mods-enabled/files
reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
# Instantiating module "pap" from file
/usr/local/etc/raddb/mods-enabled/pap
# Instantiating module "cache_eap" from file
/usr/local/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module
rlm_cache_rbtree) loaded and linked
# Instantiating module "auth_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/usr/local/etc/raddb/mods-enabled/detail.log
# Instantiating module "linelog" from file
/usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/usr/local/etc/raddb/mods-enabled/linelog
# Instantiating module "reject" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "fail" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "ok" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "handled" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "noop" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "updated" from file
/usr/local/etc/raddb/mods-enabled/always
# Instantiating module "logintime" from file
/usr/local/etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file
/usr/local/etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "eap" from file
/usr/local/etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/usr/local/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/usr/local/etc/raddb/certs/server.pem"
certificate_file = "/usr/local/etc/raddb/certs/server.pem"
ca_file = "/usr/local/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/usr/local/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "[1]http://127.0.0.1/ocsp/<http://127.0.0.1/ocsp/>"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "detail" from file
/usr/local/etc/raddb/mods-enabled/detail
# Instantiating module "preprocess" from file
/usr/local/etc/raddb/mods-enabled/preprocess
reading pairlist file
/usr/local/etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
# Instantiating module "attr_filter.post-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_reject
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check
item "FreeRADIUS-Response-Delay" found in filter list for realm
"DEFAULT".
[/usr/local/etc/raddb/mods-config/attr_filter/access_reject]:11 Check
item "FreeRADIUS-Response-Delay-USec" found in filter list for
realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/usr/local/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/usr/local/etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "sql" from file
/usr/local/etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 10.1.26-MariaDB
mysql {
tls {
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on sql.mydomain.de<http://sql.mydomain.de> via
TCP/IP, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on sql.mydomain.de<http://sql.mydomain.de> via
TCP/IP, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on sql.mydomain.de<http://sql.mydomain.de> via
TCP/IP, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on sql.mydomain.de<http://sql.mydomain.de> via
TCP/IP, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on sql.mydomain.de<http://sql.mydomain.de> via
TCP/IP, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
type, secret, server FROM nas
rlm_sql (sql): Adding client 10.0.0.1 (RAS1) to global clients list
rlm_sql (10.0.0.1): Client "RAS1" (sql) added
[...]
rlm_sql (sql): Adding client 192.168.100.1 (radius.mydomain.de<http://radius.mydomain.de>) to
global clients list
rlm_sql (192.168.100.1): Client "radius.mydomain.de<http://radius.mydomain.de>" (sql) added
rlm_sql (sql): Adding client 127.0.0.1<http://127.0.0.1> (localhost) to global clients
list
rlm_sql (127.0.0.1<http://127.0.0.1>: Client "localhost" (sql) added
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on sql.mydomain.de<http://sql.mydomain.de> via
TCP/IP, server version 10.1.26-MariaDB-0+deb9u1, protocol version 10
# Instantiating module "IPASS" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file
/usr/local/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file
/usr/local/etc/raddb/mods-enabled/realm
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /usr/local/etc/raddb/radiusd.conf
} # server
server default { # from file /usr/local/etc/raddb/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file
/usr/local/etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/usr/local/etc/raddb/sites-enabled/inner-tunnel:331
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipv4addr = 192.168.100.1
port = 1812
limit {
max_connections = 64
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv4addr = 192.168.100.1
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1<http://127.0.0.1>
port = 18120
}
Listening on auth address 192.168.100.1 port 1812 bound to server
default
Listening on acct address 192.168.100.1 port 1813 bound to server
default
Listening on auth address 127.0.0.1<http://127.0.0.1> port 18120 bound to server
inner-tunnel
Ready to process requests

References

1. http://127.0.0.1/ocsp/<http://127.0.0.1/ocsp/>

------------------------------

Subject: Digest Footer

-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html<http://www.freeradius.org/list/users.html>

------------------------------

End of Freeradius-Users Digest, Vol 161, Issue 2
************************************************