freeRadius fails to authenticate the users

[Niloofar Toorchi]

Thanks Alan! Is there any way we can increase the 30-sec limit to say 45
seconds?

Niloofar

On Fri, Aug 2, 2019 at 11:44 AM Alan DeKok <aland at deployingradius.com>
wrote:

> On Aug 2, 2019, at 2:35 PM, Niloofar Toorchi <niloofar at opennetworking.org>
> wrote:
> > We are using freeRadius to authenticate 16 supplicants. The early ones
> get authorized but the last 3 or 4 ones get rejected corresponding the
> following logs in freeRadius:
> >
> > Found Auth-Type = EAP
> > # Executing group from file /etc/freeradius/sites-enabled/default
> > +group authenticate {
> > rlm_eap: No EAP session matching the State variable.
> > [eap] Either EAP-request timed out OR EAP-response to an unknown
> EAP-request
> > [eap] Failed in handler
> > ++[eap] = invalid
>
>   That's v2. :(  If it works, good.  If not... please upgrade to v3.
>
>   This is likely not a RADIUS issue.  If the EAP session times out, it's
> because the supplicant is taking 30+ seconds between packets.  Which is
> stupid.
>
> > Can any one help me to tackle this problem?
>
>   Test with v3, which has much better debugging messages.
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html