Contents of Freeradius-Users digest...Google Authenticator

Eero Volotinen eero.volotinen at iki.fi
Mon Jan 28 08:12:17 CET 2019


works fine. remember to run freeradius as root or else it cannot access
google authenticator files

Eero

On Mon, Jan 28, 2019, 09:09 Soklang Sum <soklang.sum at cambotech.com wrote:

> Dear Team Freeradius,
>
> I would like to ask about FreeRADIUS work with google authenticator (2FA)
> or not?
> I have tried to install freeRADIUS with google authenticator but it
> doesn't work, when I try install following the guideline any website like
> https://networkjutsu.com/freeradius-google-authenticator/ it always
> rejected.
>
> So that why I want to make sure from team expertise freeRADIUS it work
> with google authenticator or not?
>
> But I saw in the guideline it works but for me never work.
>
> Please help feedback soon as possible.
>
> Thanks
>
> -----Original Message-----
> From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> cambotech.com at lists.freeradius.org> On Behalf Of
> freeradius-users-request at lists.freeradius.org
> Sent: Monday, January 28, 2019 11:42 AM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 165, Issue 69
>
> Send Freeradius-Users mailing list submissions to
>         freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
>         freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
>         freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
>    1. EAP-GTC w/ "PAP-like" LDAP authentication (Ian Pilcher)
>    2. Re: EAP-GTC w/ "PAP-like" LDAP authentication (Alan DeKok)
>    3. Multiple UserDN for different LDAPs (diego.barzon at tiscali.it)
>    4. Freeradius-Users Digest, Vol 165, Issue 68 (Soklang Sum)
>    5. radius accounting issue. (slnarayanan at nitt.edu)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 27 Jan 2019 11:43:12 -0600
> From: Ian Pilcher <arequipeno at gmail.com>
> To: freeradius-users at lists.freeradius.org
> Subject: EAP-GTC w/ "PAP-like" LDAP authentication
> Message-ID: <q2kqjg$4fa3$1 at blaine.gmane.org>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I am struggling to find documentation of how to set up $SUBJECT.
>
> I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC using a
> file-based test user, but the number of different protocols and
> configurations supported and documented in the config files means that I
> haven't been able to figure out how to achieve what I want.
>
> Any hints, links, etc. would be appreciated.
>
> Thanks!
>
> --
> ========================================================================
> Ian Pilcher                                         arequipeno at gmail.com
> -------- "I grew up before Mark Zuckerberg invented friendship" --------
> ========================================================================
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 27 Jan 2019 14:17:58 -0500
> From: Alan DeKok <aland at deployingradius.com>
> To: FreeRadius users mailing list
>         <freeradius-users at lists.freeradius.org>
> Subject: Re: EAP-GTC w/ "PAP-like" LDAP authentication
> Message-ID: <165EB1A7-2D19-4AAD-BD48-719D157BC5C5 at deployingradius.com>
> Content-Type: text/plain;       charset=us-ascii
>
> On Jan 27, 2019, at 12:43 PM, Ian Pilcher <arequipeno at gmail.com> wrote:
> >
> > I am struggling to find documentation of how to set up $SUBJECT.
> >
> > I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC using
> > a file-based test user, but the number of different protocols and
> > configurations supported and documented in the config files means that I
> > haven't been able to figure out how to achieve what I want.
>
>   (a) Make sure PEAP works with certificates.
>
>   (b) configure and enable LDAP.  See mods-available/ldap
>
>   Once the LDAP module is available, the server will automatically use it.
>
>   And, the server will automatically grab passwords from LDAP.  And, the
> server will automatically use those passwords to do EAP-GTC.
>
>   It really is that easy.  The key thing is to *let the server do the
> work*.  Don't try to "force" a particular kind of authentication.  EAP
> doesn't work that way.
>
>   If you're using Active Directory, it's harder.  Because Active Directory
> isn't a real LDAP server.
>
>   It also helps to describe what you've done, what happened, and why you
> think it's wrong.  Otherwise, we're limited to:
>
> Q: I tried stuff and it doesn't work.  What do I do?
> A: Try different stuff
>
>   Which isn't helpful to anyone.  Better questions means better answers.
>
>   Alan DeKok.
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 28 Jan 2019 00:27:28 +0100
> From: diego.barzon at tiscali.it
> To: <freeradius-users at lists.freeradius.org>
> Subject: Multiple UserDN for different LDAPs
> Message-ID: <a5fefc494d4f1514bf2d35eb706b2edb at tiscali.it>
> Content-Type: text/plain; charset=UTF-8
>
>
>
> Hi all,
>  here's the problem.
> I need to authenticate against 2
> different LDAP servers, populated with different data. I don't need
> specific information (like group memberships or so): trying to bind with
> the credentials is enough.
> In 'authorize' I set Auth to LDAP and in
> authenticate I put something like this:
> ldap1{
>  fail = 1
>  invalid = 2
>
> reject = 3
> }
> if (!ok) {
>  ldap2
> }
> ldap1 and ldap2 configurations are on
> separate files, they are different in everything: the former's a DC, the
> latter an openldap server. Moreover they have different BaseDN.
> It
> looks like freeradius set UserDN for the first ldap and tries to use the
> same on the second. I think I need two different values for LDAP-UserDN,
> which is not possible, but I read there's some kind of workaround
> involving writing on files/authorize but honestly I didn't understand
> what I'm supposed to do.
> Thanks in advance!
>
>
>
> Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per
> sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY!
> http://tisca.li/myopen
>
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 28 Jan 2019 11:14:50 +0700
> From: "Soklang Sum" <soklang.sum at cambotech.com>
> To: <freeradius-users at lists.freeradius.org>
> Subject: Freeradius-Users Digest, Vol 165, Issue 68
> Message-ID: <000201d4b6c0$05465b20$0fd31160$@cambotech.com>
> Content-Type: text/plain;       charset="utf-8"
>
> Dear Team Freeradius,
>
> I would like to ask about FreeRADIUS work with google authenticator (2FA)
> or not?
> I have tried to install freeRADIUS with google authenticator but it
> doesn't work, when I try install following the guideline any website like
> https://networkjutsu.com/freeradius-google-authenticator/ it always
> rejected.
>
> So that why I want to make sure from team expertise freeRADIUS it work
> with google authenticator or not?
>
> But I saw in the guideline it works but for me never work.
>
> Please help feedback soon as possible.
>
> Thanks
>
> ===================
>
> -----Original Message-----
> From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> cambotech.com at lists.freeradius.org> On Behalf Of
> freeradius-users-request at lists.freeradius.org
> Sent: Sunday, January 27, 2019 6:00 PM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 165, Issue 68
>
> Send Freeradius-Users mailing list submissions to
>         freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
>         freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
>         freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
>    1. Session start times issues (Philemon Jaomalaza)
>    2. Re: Session start times issues (Alan DeKok)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 26 Jan 2019 16:43:23 +0300
> From: "Philemon Jaomalaza" <philemon.jaomalaza at gmail.com>
> To: "'FreeRadius users mailing list'"
>         <freeradius-users at lists.freeradius.org>
> Subject: Session start times issues
> Message-ID: <031301d4b57d$1e29c3a0$5a7d4ae0$@gmail.com>
> Content-Type: text/plain;       charset="utf-8"
>
> Hello,
> If the nas has a wrong date and time, the sqlcounter does not work
> correctly.
>
> The attribute Event-Timestamp got the wrong data and time from nas.
>
> I found this features in preacct substitution:
>
>         update request {
>                 &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
> %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
>         }
>
> I uncomente it but nothing change.
>
> Where is the best way to have the good local time of radius server on
> "acctstarttime" column of "radacct" on sql database ?
>
> JMLZ
>
>
>
> ---
> L'absence de virus dans ce courrier électronique a été vérifiée par le
> logiciel antivirus Avast.
> https://www.avast.com/antivirus
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 26 Jan 2019 14:35:02 -0500
> From: Alan DeKok <aland at deployingradius.com>
> To: FreeRadius users mailing list
>         <freeradius-users at lists.freeradius.org>
> Subject: Re: Session start times issues
> Message-ID: <717983BF-2594-4316-807F-0726F706BD53 at deployingradius.com>
> Content-Type: text/plain;       charset=us-ascii
>
> On Jan 26, 2019, at 8:43 AM, Philemon Jaomalaza <
> philemon.jaomalaza at gmail.com> wrote:
> > If the nas has a wrong date and time, the sqlcounter does not work
> correctly.
>
>   If I take the tires off of my car, it doesn't drive well.
>
>   Solution: fix the REAL problem.
>
> > The attribute Event-Timestamp got the wrong data and time from nas.
>
>   Fix the NAS.  Anything else is an ugly hack.
>
> > I found this features in preacct substitution:
> >
> >        update request {
> >                &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
> %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
> >        }
> >
> > I uncomente it but nothing change.
> >
> > Where is the best way to have the good local time of radius server on
> "acctstarttime" column of "radacct" on sql database ?
>
>   Fix the NAS.
>
>   Alan DeKok.
>
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> ------------------------------
>
> End of Freeradius-Users Digest, Vol 165, Issue 68
> *************************************************
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 28 Jan 2019 10:05:15 +0530
> From: slnarayanan at nitt.edu
> To: FreeRadius users mailing list
>         <freeradius-users at lists.freeradius.org>
> Subject: radius accounting issue.
> Message-ID:
>         <20190128100515.Horde.b8e9HpA3uLd-EHwBhBcx3A6 at webmail.nitt.edu>
> Content-Type: text/plain; charset="utf-8"; Format="flowed";
>         DelSp="Yes"
>
>
> Dear All,
>
>        I have a problem with accounting .Everything is working fine on
> freeradius.Login& authentication sql everything is working fine.But i
> have a problem in accounting pocket.We are using sonciwall firwall in
> our campus.Those who logged through our radius server the login
> information (Radius Accounting) information need to display on
> sonicwall user's page.The UDP pocket 1813 not send to our firewall
> ip.In the firewall i have enable policy allow to all our local
> network.I have attached my radiususd -X log to this mail.Kindly
> provide the solution for resolve my issue.The Radius Accounting
> information now shows on radacct in the phpmyadmin.
>
> Regards.
> S.Lakshmi narayanan
>
> -------------- next part --------------
> FreeRADIUS Version 3.0.13
> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/raddb/dictionary
> including configuration file /etc/raddb/radiusd.conf
> including configuration file /etc/raddb/proxy.conf
> including configuration file /etc/raddb/clients.conf
> including files in directory /etc/raddb/mods-enabled/
> including configuration file /etc/raddb/mods-enabled/always
> including configuration file /etc/raddb/mods-enabled/attr_filter
> including configuration file /etc/raddb/mods-enabled/cache_eap
> including configuration file /etc/raddb/mods-enabled/chap
> including configuration file /etc/raddb/mods-enabled/date
> including configuration file /etc/raddb/mods-enabled/detail
> including configuration file /etc/raddb/mods-enabled/detail.log
> including configuration file /etc/raddb/mods-enabled/dhcp
> including configuration file /etc/raddb/mods-enabled/digest
> including configuration file /etc/raddb/mods-enabled/dynamic_clients
> including configuration file /etc/raddb/mods-enabled/eap
> including configuration file /etc/raddb/mods-enabled/echo
> including configuration file /etc/raddb/mods-enabled/exec
> including configuration file /etc/raddb/mods-enabled/expiration
> including configuration file /etc/raddb/mods-enabled/expr
> including configuration file /etc/raddb/mods-enabled/files
> including configuration file /etc/raddb/mods-enabled/linelog
> including configuration file /etc/raddb/mods-enabled/logintime
> including configuration file /etc/raddb/mods-enabled/mschap
> including configuration file /etc/raddb/mods-enabled/ntlm_auth
> including configuration file /etc/raddb/mods-enabled/pap
> including configuration file /etc/raddb/mods-enabled/passwd
> including configuration file /etc/raddb/mods-enabled/preprocess
> including configuration file /etc/raddb/mods-enabled/radutmp
> including configuration file /etc/raddb/mods-enabled/realm
> including configuration file /etc/raddb/mods-enabled/replicate
> including configuration file /etc/raddb/mods-enabled/soh
> including configuration file /etc/raddb/mods-enabled/sradutmp
> including configuration file /etc/raddb/mods-enabled/unix
> including configuration file /etc/raddb/mods-enabled/unpack
> including configuration file /etc/raddb/mods-enabled/utf8
> including configuration file /etc/raddb/mods-enabled/sql
> including configuration file
> /etc/raddb/mods-config/sql/main/mysql/queries.conf
> including files in directory /etc/raddb/policy.d/
> including configuration file /etc/raddb/policy.d/accounting
> including configuration file /etc/raddb/policy.d/canonicalization
> including configuration file /etc/raddb/policy.d/control
> including configuration file /etc/raddb/policy.d/cui
> including configuration file /etc/raddb/policy.d/debug
> including configuration file /etc/raddb/policy.d/dhcp
> including configuration file /etc/raddb/policy.d/eap
> including configuration file /etc/raddb/policy.d/filter
> including configuration file /etc/raddb/policy.d/operator-name
> including files in directory /etc/raddb/sites-enabled/
> including configuration file /etc/raddb/sites-enabled/default
> including configuration file /etc/raddb/sites-enabled/inner-tunnel
> main {
>  security {
>         user = "radiusd"
>         group = "radiusd"
>         allow_core_dumps = no
>  }
>         name = "radiusd"
>         prefix = "/usr"
>         localstatedir = "/var"
>         logdir = "/var/log/radius"
>         run_dir = "/var/run/radiusd"
> }
> main {
>         name = "radiusd"
>         prefix = "/usr"
>         localstatedir = "/var"
>         sbindir = "/usr/sbin"
>         logdir = "/var/log/radius"
>         run_dir = "/var/run/radiusd"
>         libdir = "/usr/lib64/freeradius"
>         radacctdir = "/var/log/radius/radacct"
>         hostname_lookups = no
>         max_request_time = 30
>         cleanup_delay = 5
>         max_requests = 16384
>         pidfile = "/var/run/radiusd/radiusd.pid"
>         checkrad = "/usr/sbin/checkrad"
>         debug_level = 0
>         proxy_requests = no
>  log {
>         stripped_names = yes
>         auth = yes
>         auth_badpass = yes
>         auth_goodpass = yes
>         colourise = yes
>         msg_denied = "You are already logged in - access denied"
>  }
>  resources {
>  }
>  security {
>         max_attributes = 200
>         reject_delay = 1.000000
>         status_server = yes
>  }
> }
> radiusd: #### Loading Realms and Home Servers ####
>  proxy server {
>         retry_delay = 5
>         retry_count = 3
>         default_fallback = no
>         dead_time = 120
>         wake_all_if_all_dead = no
>  }
>  home_server localhost {
>         ipaddr = 127.0.0.1
>         port = 1812
>         type = "auth"
>         secret = <<< secret >>>
>         response_window = 20.000000
>         response_timeouts = 1
>         max_outstanding = 65536
>         zombie_period = 40
>         status_check = "status-server"
>         ping_interval = 30
>         check_interval = 30
>         check_timeout = 4
>         num_answers_to_alive = 3
>         revive_interval = 120
>   limit {
>         max_connections = 16
>         max_requests = 0
>         lifetime = 0
>         idle_timeout = 0
>   }
>   coa {
>         irt = 2
>         mrt = 16
>         mrc = 5
>         mrd = 30
>   }
>  }
>  home_server_pool my_auth_failover {
>         type = fail-over
>         home_server = localhost
>  }
>  realm example.com {
>         auth_pool = my_auth_failover
>  }
>  realm LOCAL {
>  }
>  realm int {
>         virtual_server = inner-tunnel
>  }
> radiusd: #### Loading Clients ####
>  client localhost {
>         ipv4addr = *
>         require_message_authenticator = no
>         secret = <<< secret >>>
>         nas_type = "other"
>         proto = "udp"
>   limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 0
>   }
>  }
> Debugger not attached
>  # Creating Auth-Type = mschap
>  # Creating Auth-Type = eap
>  # Creating Auth-Type = NTLMAuth
>  # Creating Auth-Type = MS-CHAP
>  # Creating Autz-Type = Status-Server
>  # Creating Acct-Type = Status-Server
>  # Creating Auth-Type = NTLM_AUTH
> radiusd: #### Instantiating modules ####
>  modules {
>   # Loaded module rlm_always
>   # Loading module "reject" from file /etc/raddb/mods-enabled/always
>   always reject {
>         rcode = "reject"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "fail" from file /etc/raddb/mods-enabled/always
>   always fail {
>         rcode = "fail"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "ok" from file /etc/raddb/mods-enabled/always
>   always ok {
>         rcode = "ok"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "handled" from file /etc/raddb/mods-enabled/always
>   always handled {
>         rcode = "handled"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "invalid" from file /etc/raddb/mods-enabled/always
>   always invalid {
>         rcode = "invalid"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "userlock" from file /etc/raddb/mods-enabled/always
>   always userlock {
>         rcode = "userlock"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "notfound" from file /etc/raddb/mods-enabled/always
>   always notfound {
>         rcode = "notfound"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "noop" from file /etc/raddb/mods-enabled/always
>   always noop {
>         rcode = "noop"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "updated" from file /etc/raddb/mods-enabled/always
>   always updated {
>         rcode = "updated"
>         simulcount = 0
>         mpp = no
>   }
>   # Loaded module rlm_attr_filter
>   # Loading module "attr_filter.post-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.post-proxy {
>         filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
>         key = "%{Realm}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.pre-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.pre-proxy {
>         filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
>         key = "%{Realm}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.access_reject" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.access_reject {
>         filename = "/etc/raddb/mods-config/attr_filter/access_reject"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.access_challenge" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.access_challenge {
>         filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.accounting_response" from file
> /etc/raddb/mods-enabled/attr_filter
>   attr_filter attr_filter.accounting_response {
>         filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   # Loaded module rlm_cache
>   # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
>   cache cache_eap {
>         driver = "rlm_cache_rbtree"
>         key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>         ttl = 15
>         max_entries = 0
>         epoch = 0
>         add_stats = no
>   }
>   # Loaded module rlm_chap
>   # Loading module "chap" from file /etc/raddb/mods-enabled/chap
>   # Loaded module rlm_date
>   # Loading module "date" from file /etc/raddb/mods-enabled/date
>   date {
>         format = "%b %e %Y %H:%M:%S %Z"
>   }
>   # Loaded module rlm_detail
>   # Loading module "detail" from file /etc/raddb/mods-enabled/detail
>   detail {
>         filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
>   detail auth_log {
>         filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
>   detail reply_log {
>         filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "pre_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
>   detail pre_proxy_log {
>         filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "post_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
>   detail post_proxy_log {
>         filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loaded module rlm_dhcp
>   # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
>   # Loaded module rlm_digest
>   # Loading module "digest" from file /etc/raddb/mods-enabled/digest
>   # Loaded module rlm_dynamic_clients
>   # Loading module "dynamic_clients" from file
> /etc/raddb/mods-enabled/dynamic_clients
>   # Loaded module rlm_eap
>   # Loading module "eap" from file /etc/raddb/mods-enabled/eap
>   eap {
>         default_eap_type = "peap"
>         timer_expire = 60
>         ignore_unknown_eap_types = no
>         cisco_accounting_username_bug = no
>         max_sessions = 16384
>   }
>   # Loaded module rlm_exec
>   # Loading module "echo" from file /etc/raddb/mods-enabled/echo
>   exec echo {
>         wait = yes
>         program = "/bin/echo %{User-Name}"
>         input_pairs = "request"
>         output_pairs = "reply"
>         shell_escape = yes
>   }
>   # Loading module "exec" from file /etc/raddb/mods-enabled/exec
>   exec {
>         wait = no
>         input_pairs = "request"
>         shell_escape = yes
>         timeout = 10
>   }
>   # Loaded module rlm_expiration
>   # Loading module "expiration" from file
> /etc/raddb/mods-enabled/expiration
>   # Loaded module rlm_expr
>   # Loading module "expr" from file /etc/raddb/mods-enabled/expr
>   expr {
>         safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>   }
>   # Loaded module rlm_files
>   # Loading module "files" from file /etc/raddb/mods-enabled/files
>   files {
>         filename = "/etc/raddb/mods-config/files/authorize"
>         acctusersfile = "/etc/raddb/mods-config/files/accounting"
>         preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
>   }
>   # Loaded module rlm_linelog
>   # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
>   linelog {
>         filename = "/var/log/radius/linelog"
>         escape_filenames = no
>         syslog_severity = "info"
>         permissions = 384
>         format = "This is a log message for %{User-Name}"
>         reference = "messages.%{%{reply:Packet-Type}:-default}"
>   }
>   # Loading module "log_accounting" from file
> /etc/raddb/mods-enabled/linelog
>   linelog log_accounting {
>         filename = "/var/log/radius/linelog-accounting"
>         escape_filenames = no
>         syslog_severity = "info"
>         permissions = 384
>         format = ""
>         reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>   }
>   # Loaded module rlm_logintime
>   # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
>   logintime {
>         minimum_timeout = 60
>   }
>   # Loaded module rlm_mschap
>   # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
>   mschap {
>         use_mppe = yes
>         require_encryption = yes
>         require_strong = yes
>         with_ntdomain_hack = yes
>         ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-
> OCTA.EDU} --challenge=%{mschap:Challenge:-00}
> --nt-response=%{mschap:NT-Response:-00}"
>         ntlm_auth_timeout = 10
>    passchange {
>         ntlm_auth = "/usr/bin/ntlm_auth
> --helper-protocol=ntlm-change-password-1"
>         ntlm_auth_username = "username: %{mschap:User-Name}"
>         ntlm_auth_domain = "nt-domain: %{mschap:NT-Domain}"
>    }
>         allow_retry = yes
>         winbind_retry_with_normalised_username = no
>   }
>   # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
>   exec ntlm_auth {
>         wait = yes
>         program = "/usr/bin/ntlm_auth --request-nt-key --domain=OCTA.EDU
> --username=%{mschap:User-Name} --password=%{User-Password}"
>         shell_escape = yes
>   }
>   # Loaded module rlm_pap
>   # Loading module "pap" from file /etc/raddb/mods-enabled/pap
>   pap {
>         normalise = yes
>   }
>   # Loaded module rlm_passwd
>   # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
>   passwd etc_passwd {
>         filename = "/etc/passwd"
>         format = "*User-Name:Cleartext-Password:"
>         delimiter = ":"
>         ignore_nislike = no
>         ignore_empty = yes
>         allow_multiple_keys = no
>         hash_size = 100
>   }
>   # Loaded module rlm_preprocess
>   # Loading module "preprocess" from file
> /etc/raddb/mods-enabled/preprocess
>   preprocess {
>         huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
>         hints = "/etc/raddb/mods-config/preprocess/hints"
>         with_ascend_hack = no
>         ascend_channels_per_line = 23
>         with_ntdomain_hack = no
>         with_specialix_jetstream_hack = no
>         with_cisco_vsa_hack = no
>         with_alvarion_vsa_hack = no
>   }
>   # Loaded module rlm_radutmp
>   # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
>   radutmp {
>         filename = "/var/log/radius/radutmp"
>         username = "%{User-Name}"
>         case_sensitive = no
>         check_with_nas = yes
>         permissions = 384
>         caller_id = yes
>   }
>   # Loaded module rlm_realm
>   # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
>   realm IPASS {
>         format = "prefix"
>         delimiter = "/"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
>   realm suffix {
>         format = "suffix"
>         delimiter = "@"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
>   realm realmpercent {
>         format = "suffix"
>         delimiter = "%"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
>   realm ntdomain {
>         format = "prefix"
>         delimiter = "\\"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loaded module rlm_replicate
>   # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
>   # Loaded module rlm_soh
>   # Loading module "soh" from file /etc/raddb/mods-enabled/soh
>   soh {
>         dhcp = yes
>   }
>   # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
>   radutmp sradutmp {
>         filename = "/var/log/radius/sradutmp"
>         username = "%{User-Name}"
>         case_sensitive = yes
>         check_with_nas = yes
>         permissions = 420
>         caller_id = no
>   }
>   # Loaded module rlm_unix
>   # Loading module "unix" from file /etc/raddb/mods-enabled/unix
>   unix {
>         radwtmp = "/var/log/radius/radwtmp"
>   }
> Creating attribute Unix-Group
>   # Loaded module rlm_unpack
>   # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
>   # Loaded module rlm_utf8
>   # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
>   # Loaded module rlm_sql
>   # Loading module "sql" from file /etc/raddb/mods-enabled/sql
>   sql {
>         driver = "rlm_sql_mysql"
>         server = "localhost"
>         port = 3306
>         login = "root"
>         password = <<< secret >>>
>         radius_db = "radius"
>         read_groups = yes
>         read_profiles = yes
>         read_clients = yes
>         delete_stale_sessions = yes
>         sql_user_name = "%{User-Name}"
>         logfile = "/var/log/radius/sqllog.sql"
>         default_user_profile = ""
>         client_query = "SELECT id, nasname, shortname, type, secret,
> server FROM nas"
>         authorize_check_query = "SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
>         authorize_reply_query = "SELECT id, username, attribute, value, op
> FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
>         authorize_group_check_query = "SELECT id, groupname, attribute,
> Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
>         authorize_group_reply_query = "SELECT id, groupname, attribute,
> value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
>         group_membership_query = "SELECT groupname FROM radusergroup WHERE
> username = '%{SQL-User-Name}' ORDER BY priority"
>         simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
> '%{SQL-User-Name}' AND acctstoptime IS NULL"
>         simul_verify_query = "SELECT radacctid, acctsessionid, username,
> nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
> FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
>         safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>    accounting {
>         reference = "%{tolower:type.%{Acct-Status-Type}.query}"
>     type {
>      accounting-on {
>         query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   =
> '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
> acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
>      }
>      accounting-off {
>         query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   =
> '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
> acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
>      }
>      start {
>         query = "INSERT INTO radacct (acctsessionid,
> acctuniqueid,           username, realm,
> nasipaddress,           nasportid, nasporttype,         acctstarttime,
>     acctupdatetime, acctstoptime,           acctsessiontime,
> acctauthentic, connectinfo_start,       connectinfo_stop,
>  acctinputoctets, acctoutputoctets,      calledstationid,
> callingstationid, acctterminatecause,   servicetype,
> framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
> FROM_UNIXTIME(%{integer:Event-Timestamp}),
> FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}',
> '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
> '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
> '%{Framed-IP-Address}')"
>      }
>      interim-update {
>         query = "UPDATE radacct SET acctupdatetime  =
> (@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    =
> %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
> framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> '%{Acct-Unique-Session-Id}'"
>      }
>      stop {
>         query = "UPDATE radacct SET acctstoptime        =
> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets        =
> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> AcctUniqueId = '%{Acct-Unique-Session-Id}'"
>      }
>     }
>    }
>    post-auth {
>         reference = ".query"
>         query = "INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S')"
>    }
>   }
> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked
> Creating attribute SQL-Group
>   instantiate {
>   }
>   # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "userlock" from file
> /etc/raddb/mods-enabled/always
>   # Instantiating module "notfound" from file
> /etc/raddb/mods-enabled/always
>   # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
>   # Instantiating module "attr_filter.post-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
>   # Instantiating module "attr_filter.pre-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
>   # Instantiating module "attr_filter.access_reject" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay"    found in filter list for realm "DEFAULT".
> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec"       found in filter list for realm
> "DEFAULT".
>   # Instantiating module "attr_filter.access_challenge" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
>   # Instantiating module "attr_filter.accounting_response" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /etc/raddb/mods-config/attr_filter/accounting_response
>   # Instantiating module "cache_eap" from file
> /etc/raddb/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
>   # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
>   # Instantiating module "auth_log" from file
> /etc/raddb/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
>   # Instantiating module "reply_log" from file
> /etc/raddb/mods-enabled/detail.log
>   # Instantiating module "pre_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
>   # Instantiating module "post_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
>   # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
>    # Linked to sub-module rlm_eap_tls
>    tls {
>         tls = "tls-common"
>    }
>    tls-config tls-common {
>         verify_depth = 0
>         ca_path = "/etc/raddb/certs"
>         pem_file_type = yes
>         private_key_file = "/etc/raddb/certs/server.pem"
>         certificate_file = "/etc/raddb/certs/server.pem"
>         ca_file = "/etc/raddb/certs/ca.pem"
>         private_key_password = <<< secret >>>
>         fragment_size = 1024
>         include_length = yes
>         auto_chain = yes
>         check_crl = no
>         check_all_crl = no
>         cipher_list = "DEFAULT"
>         cipher_server_preference = no
>         ecdh_curve = "prime256v1"
>     cache {
>         enable = no
>         lifetime = 24
>         max_entries = 255
>     }
>     verify {
>         skip_if_ocsp_ok = no
>     }
>     ocsp {
>         enable = no
>         override_cert_url = yes
>         url = "http://127.0.0.1/ocsp/"
>         use_nonce = yes
>         timeout = 0
>         softfail = no
>     }
>    }
>    # Linked to sub-module rlm_eap_ttls
>    ttls {
>         tls = "tls-common"
>         default_eap_type = "md5"
>         copy_request_to_tunnel = no
>         use_tunneled_reply = no
>         virtual_server = "inner-tunnel"
>         include_length = yes
>         require_client_cert = no
>    }
> tls: Using cached TLS configuration from previous invocation
>    # Linked to sub-module rlm_eap_peap
>    peap {
>         tls = "tls-common"
>         default_eap_type = "mschapv2"
>         copy_request_to_tunnel = yes
>         use_tunneled_reply = yes
>         proxy_tunneled_request_as_eap = no
>         virtual_server = "inner-tunnel"
>         soh = no
>         require_client_cert = no
>    }
> tls: Using cached TLS configuration from previous invocation
>    # Linked to sub-module rlm_eap_mschapv2
>    mschapv2 {
>         with_ntdomain_hack = no
>         send_error = yes
>         identity = "FreeRADIUS"
>    }
>   # Instantiating module "expiration" from file
> /etc/raddb/mods-enabled/expiration
>   # Instantiating module "files" from file /etc/raddb/mods-enabled/files
> reading pairlist file /etc/raddb/mods-config/files/authorize
> reading pairlist file /etc/raddb/mods-config/files/accounting
> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
>   # Instantiating module "linelog" from file
> /etc/raddb/mods-enabled/linelog
>   # Instantiating module "log_accounting" from file
> /etc/raddb/mods-enabled/linelog
>   # Instantiating module "logintime" from file
> /etc/raddb/mods-enabled/logintime
>   # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
> rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
>   # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
>   # Instantiating module "etc_passwd" from file
> /etc/raddb/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>   # Instantiating module "preprocess" from file
> /etc/raddb/mods-enabled/preprocess
> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /etc/raddb/mods-config/preprocess/hints
>   # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
>   # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
>   # Instantiating module "realmpercent" from file
> /etc/raddb/mods-enabled/realm
>   # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
>   # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
> rlm_sql_mysql: libmysql version: 10.1.37-MariaDB
>    mysql {
>     tls {
>     }
>         warnings = "auto"
>    }
> rlm_sql (sql): Attempting to connect to database "radius"
> rlm_sql (sql): Initialising connection pool
>    pool {
>         start = 5
>         min = 3
>         max = 32
>         spare = 10
>         uses = 0
>         lifetime = 0
>         cleanup_interval = 30
>         idle_timeout = 60
>         retry_delay = 30
>         spread = no
>    }
> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10
> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10
> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10
> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10
> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10
> rlm_sql (sql): Processing generate_sql_clients
> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
> shortname, type, secret, server FROM nas
> rlm_sql (sql): Reserved connection (0)
> rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
> type, secret, server FROM nas
> rlm_sql (sql): Adding client 10.0.0.38 (domain controller) to global
> clients list
> rlm_sql (10.0.0.38): Client "domain controller" (sql) added
> rlm_sql (sql): Adding client 10.0.0.39 (domain contr-2) to global clients
> list
> rlm_sql (10.0.0.39): Client "domain contr-2" (sql) added
> rlm_sql (sql): Adding client 10.1.172.16 (team2) to global clients list
> rlm_sql (10.1.172.16): Client "team2" (sql) added
> rlm_sql (sql): Adding client 10.1.172.18 (team4) to global clients list
> rlm_sql (10.1.172.18): Client "team4" (sql) added
> rlm_sql (sql): Adding client 10.1.172.19 (team5) to global clients list
> rlm_sql (10.1.172.19): Client "team5" (sql) added
> rlm_sql (sql): Adding client 10.1.172.20 (team6) to global clients list
> rlm_sql (10.1.172.20): Client "team6" (sql) added
> rlm_sql (sql): Adding client 10.0.0.1 (Local network) to global clients
> list
> rlm_sql (10.0.0.1): Client "Local network" (sql) added
> rlm_sql (sql): Adding client 192.168.20.1 (ACCT) to global clients list
> rlm_sql (192.168.20.1): Client "ACCT" (sql) added
> rlm_sql (sql): Released connection (0)
> Need 5 more connections to reach 10 spares
> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10
>  } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/raddb/radiusd.conf
> } # server
> server default { # from file /etc/raddb/sites-enabled/default
>  # Loading authenticate {...}
>  # Loading authorize {...}
> Ignoring "ldap" (see raddb/mods-available/README.rst)
>  # Loading preacct {...}
>  # Loading accounting {...}
> } # server default
> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>  # Loading authenticate {...}
>  # Loading authorize {...}
>  # Loading session {...}
>  # Loading post-auth {...}
> } # server inner-tunnel
> radiusd: #### Opening IP addresses and Ports ####
> listen {
>         type = "auth"
>         ipaddr = *
>         port = 0
>    limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 0
>    }
> Failed binding to auth address * port 1812 bound to server default:
> Address already in use
> /etc/raddb/sites-enabled/default[60]: Error binding to port for 0.0.0.0
> port 1812
>
> ------------------------------
>
> Subject: Digest Footer
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> ------------------------------
>
> End of Freeradius-Users Digest, Vol 165, Issue 69
> *************************************************
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html


More information about the Freeradius-Users mailing list