Freeradius-Users Digest, Vol 165, Issue 71
Soklang Sum
soklang.sum at cambotech.com
Mon Jan 28 08:37:05 CET 2019
Dear Eero Volotinen,
Can you give me more details the guide its work or link preference how to do it?
My problem in this step:
# vi /etc/raddb/users
DEFAULT Group == "disabled", Auth-Type := Reject
Reply-Message = "Your account has been disabled."
DEFAULT Auth-Type := PAM
When I enable the step as mention above, it always rejected.
This is RADIUS Debugs in my attachment file.
-----Original Message-----
From: Freeradius-Users <freeradius-users-bounces+soklang.sum=cambotech.com at lists.freeradius.org> On Behalf Of freeradius-users-request at lists.freeradius.org
Sent: Monday, January 28, 2019 2:13 PM
To: freeradius-users at lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 165, Issue 71
Send Freeradius-Users mailing list submissions to
freeradius-users at lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit
http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
freeradius-users-request at lists.freeradius.org
You can reach the person managing the list at
freeradius-users-owner at lists.freeradius.org
When replying, please edit your Subject line so it is more specific than "Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Re: Contents of Freeradius-Users digest...Google
Authenticator (Eero Volotinen)
----------------------------------------------------------------------
Message: 1
Date: Mon, 28 Jan 2019 09:12:17 +0200
From: Eero Volotinen <eero.volotinen at iki.fi>
To: FreeRadius users mailing list
<freeradius-users at lists.freeradius.org>, soklang.sum at cambotech.com
Subject: Re: Contents of Freeradius-Users digest...Google
Authenticator
Message-ID:
<CABzZrXdo9ExvdiNDjo5485NKnjp=QfaZfwhU+GdMVO7V9i592g at mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
works fine. remember to run freeradius as root or else it cannot access google authenticator files
Eero
On Mon, Jan 28, 2019, 09:09 Soklang Sum <soklang.sum at cambotech.com wrote:
> Dear Team Freeradius,
>
> I would like to ask about FreeRADIUS work with google authenticator
> (2FA) or not?
> I have tried to install freeRADIUS with google authenticator but it
> doesn't work, when I try install following the guideline any website
> like https://networkjutsu.com/freeradius-google-authenticator/ it
> always rejected.
>
> So that why I want to make sure from team expertise freeRADIUS it work
> with google authenticator or not?
>
> But I saw in the guideline it works but for me never work.
>
> Please help feedback soon as possible.
>
> Thanks
>
> -----Original Message-----
> From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> cambotech.com at lists.freeradius.org> On Behalf Of
> freeradius-users-request at lists.freeradius.org
> Sent: Monday, January 28, 2019 11:42 AM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 165, Issue 69
>
> Send Freeradius-Users mailing list submissions to
> freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
> freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
> freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific
> than
> "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
> 1. EAP-GTC w/ "PAP-like" LDAP authentication (Ian Pilcher)
> 2. Re: EAP-GTC w/ "PAP-like" LDAP authentication (Alan DeKok)
> 3. Multiple UserDN for different LDAPs (diego.barzon at tiscali.it)
> 4. Freeradius-Users Digest, Vol 165, Issue 68 (Soklang Sum)
> 5. radius accounting issue. (slnarayanan at nitt.edu)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sun, 27 Jan 2019 11:43:12 -0600
> From: Ian Pilcher <arequipeno at gmail.com>
> To: freeradius-users at lists.freeradius.org
> Subject: EAP-GTC w/ "PAP-like" LDAP authentication
> Message-ID: <q2kqjg$4fa3$1 at blaine.gmane.org>
> Content-Type: text/plain; charset=utf-8; format=flowed
>
> I am struggling to find documentation of how to set up $SUBJECT.
>
> I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC
> using a file-based test user, but the number of different protocols
> and configurations supported and documented in the config files means
> that I haven't been able to figure out how to achieve what I want.
>
> Any hints, links, etc. would be appreciated.
>
> Thanks!
>
> --
> ========================================================================
> Ian Pilcher arequipeno at gmail.com
> -------- "I grew up before Mark Zuckerberg invented friendship"
> --------
> ======================================================================
> ==
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sun, 27 Jan 2019 14:17:58 -0500
> From: Alan DeKok <aland at deployingradius.com>
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Subject: Re: EAP-GTC w/ "PAP-like" LDAP authentication
> Message-ID: <165EB1A7-2D19-4AAD-BD48-719D157BC5C5 at deployingradius.com>
> Content-Type: text/plain; charset=us-ascii
>
> On Jan 27, 2019, at 12:43 PM, Ian Pilcher <arequipeno at gmail.com> wrote:
> >
> > I am struggling to find documentation of how to set up $SUBJECT.
> >
> > I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC
> > using a file-based test user, but the number of different protocols
> > and configurations supported and documented in the config files
> > means that I haven't been able to figure out how to achieve what I want.
>
> (a) Make sure PEAP works with certificates.
>
> (b) configure and enable LDAP. See mods-available/ldap
>
> Once the LDAP module is available, the server will automatically use it.
>
> And, the server will automatically grab passwords from LDAP. And,
> the server will automatically use those passwords to do EAP-GTC.
>
> It really is that easy. The key thing is to *let the server do the
> work*. Don't try to "force" a particular kind of authentication. EAP
> doesn't work that way.
>
> If you're using Active Directory, it's harder. Because Active
> Directory isn't a real LDAP server.
>
> It also helps to describe what you've done, what happened, and why
> you think it's wrong. Otherwise, we're limited to:
>
> Q: I tried stuff and it doesn't work. What do I do?
> A: Try different stuff
>
> Which isn't helpful to anyone. Better questions means better answers.
>
> Alan DeKok.
>
>
>
>
> ------------------------------
>
> Message: 3
> Date: Mon, 28 Jan 2019 00:27:28 +0100
> From: diego.barzon at tiscali.it
> To: <freeradius-users at lists.freeradius.org>
> Subject: Multiple UserDN for different LDAPs
> Message-ID: <a5fefc494d4f1514bf2d35eb706b2edb at tiscali.it>
> Content-Type: text/plain; charset=UTF-8
>
>
>
> Hi all,
> here's the problem.
> I need to authenticate against 2
> different LDAP servers, populated with different data. I don't need
> specific information (like group memberships or so): trying to bind
> with the credentials is enough.
> In 'authorize' I set Auth to LDAP and in authenticate I put something
> like this:
> ldap1{
> fail = 1
> invalid = 2
>
> reject = 3
> }
> if (!ok) {
> ldap2
> }
> ldap1 and ldap2 configurations are on
> separate files, they are different in everything: the former's a DC,
> the latter an openldap server. Moreover they have different BaseDN.
> It
> looks like freeradius set UserDN for the first ldap and tries to use
> the same on the second. I think I need two different values for
> LDAP-UserDN, which is not possible, but I read there's some kind of
> workaround involving writing on files/authorize but honestly I didn't
> understand what I'm supposed to do.
> Thanks in advance!
>
>
>
> Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per
> sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY!
> http://tisca.li/myopen
>
>
>
> ------------------------------
>
> Message: 4
> Date: Mon, 28 Jan 2019 11:14:50 +0700
> From: "Soklang Sum" <soklang.sum at cambotech.com>
> To: <freeradius-users at lists.freeradius.org>
> Subject: Freeradius-Users Digest, Vol 165, Issue 68
> Message-ID: <000201d4b6c0$05465b20$0fd31160$@cambotech.com>
> Content-Type: text/plain; charset="utf-8"
>
> Dear Team Freeradius,
>
> I would like to ask about FreeRADIUS work with google authenticator
> (2FA) or not?
> I have tried to install freeRADIUS with google authenticator but it
> doesn't work, when I try install following the guideline any website
> like https://networkjutsu.com/freeradius-google-authenticator/ it
> always rejected.
>
> So that why I want to make sure from team expertise freeRADIUS it work
> with google authenticator or not?
>
> But I saw in the guideline it works but for me never work.
>
> Please help feedback soon as possible.
>
> Thanks
>
> ===================
>
> -----Original Message-----
> From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> cambotech.com at lists.freeradius.org> On Behalf Of
> freeradius-users-request at lists.freeradius.org
> Sent: Sunday, January 27, 2019 6:00 PM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 165, Issue 68
>
> Send Freeradius-Users mailing list submissions to
> freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
> freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
> freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific
> than
> "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
> 1. Session start times issues (Philemon Jaomalaza)
> 2. Re: Session start times issues (Alan DeKok)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Sat, 26 Jan 2019 16:43:23 +0300
> From: "Philemon Jaomalaza" <philemon.jaomalaza at gmail.com>
> To: "'FreeRadius users mailing list'"
> <freeradius-users at lists.freeradius.org>
> Subject: Session start times issues
> Message-ID: <031301d4b57d$1e29c3a0$5a7d4ae0$@gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hello,
> If the nas has a wrong date and time, the sqlcounter does not work
> correctly.
>
> The attribute Event-Timestamp got the wrong data and time from nas.
>
> I found this features in preacct substitution:
>
> update request {
> &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
> %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
> }
>
> I uncomente it but nothing change.
>
> Where is the best way to have the good local time of radius server on
> "acctstarttime" column of "radacct" on sql database ?
>
> JMLZ
>
>
>
> ---
> L'absence de virus dans ce courrier électronique a été vérifiée par le
> logiciel antivirus Avast.
> https://www.avast.com/antivirus
>
>
>
>
> ------------------------------
>
> Message: 2
> Date: Sat, 26 Jan 2019 14:35:02 -0500
> From: Alan DeKok <aland at deployingradius.com>
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Subject: Re: Session start times issues
> Message-ID: <717983BF-2594-4316-807F-0726F706BD53 at deployingradius.com>
> Content-Type: text/plain; charset=us-ascii
>
> On Jan 26, 2019, at 8:43 AM, Philemon Jaomalaza <
> philemon.jaomalaza at gmail.com> wrote:
> > If the nas has a wrong date and time, the sqlcounter does not work
> correctly.
>
> If I take the tires off of my car, it doesn't drive well.
>
> Solution: fix the REAL problem.
>
> > The attribute Event-Timestamp got the wrong data and time from nas.
>
> Fix the NAS. Anything else is an ugly hack.
>
> > I found this features in preacct substitution:
> >
> > update request {
> > &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
> %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
> > }
> >
> > I uncomente it but nothing change.
> >
> > Where is the best way to have the good local time of radius server
> > on
> "acctstarttime" column of "radacct" on sql database ?
>
> Fix the NAS.
>
> Alan DeKok.
>
>
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> ------------------------------
>
> End of Freeradius-Users Digest, Vol 165, Issue 68
> *************************************************
>
>
>
>
> ------------------------------
>
> Message: 5
> Date: Mon, 28 Jan 2019 10:05:15 +0530
> From: slnarayanan at nitt.edu
> To: FreeRadius users mailing list
> <freeradius-users at lists.freeradius.org>
> Subject: radius accounting issue.
> Message-ID:
>
> <20190128100515.Horde.b8e9HpA3uLd-EHwBhBcx3A6 at webmail.nitt.edu>
> Content-Type: text/plain; charset="utf-8"; Format="flowed";
> DelSp="Yes"
>
>
> Dear All,
>
> I have a problem with accounting .Everything is working fine on
> freeradius.Login& authentication sql everything is working fine.But i
> have a problem in accounting pocket.We are using sonciwall firwall in
> our campus.Those who logged through our radius server the login
> information (Radius Accounting) information need to display on
> sonicwall user's page.The UDP pocket 1813 not send to our firewall
> ip.In the firewall i have enable policy allow to all our local
> network.I have attached my radiususd -X log to this mail.Kindly
> provide the solution for resolve my issue.The Radius Accounting
> information now shows on radacct in the phpmyadmin.
>
> Regards.
> S.Lakshmi narayanan
>
> -------------- next part -------------- FreeRADIUS Version 3.0.13
> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the
> terms of the GNU General Public License For more information about
> these matters, see the file named COPYRIGHT Starting - reading
> configuration files ...
> including dictionary file /usr/share/freeradius/dictionary including
> dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/raddb/dictionary including
> configuration file /etc/raddb/radiusd.conf including configuration
> file /etc/raddb/proxy.conf including configuration file
> /etc/raddb/clients.conf including files in directory
> /etc/raddb/mods-enabled/ including configuration file
> /etc/raddb/mods-enabled/always including configuration file
> /etc/raddb/mods-enabled/attr_filter
> including configuration file /etc/raddb/mods-enabled/cache_eap
> including configuration file /etc/raddb/mods-enabled/chap including
> configuration file /etc/raddb/mods-enabled/date including
> configuration file /etc/raddb/mods-enabled/detail including
> configuration file /etc/raddb/mods-enabled/detail.log
> including configuration file /etc/raddb/mods-enabled/dhcp including
> configuration file /etc/raddb/mods-enabled/digest including
> configuration file /etc/raddb/mods-enabled/dynamic_clients
> including configuration file /etc/raddb/mods-enabled/eap including
> configuration file /etc/raddb/mods-enabled/echo including
> configuration file /etc/raddb/mods-enabled/exec including
> configuration file /etc/raddb/mods-enabled/expiration
> including configuration file /etc/raddb/mods-enabled/expr including
> configuration file /etc/raddb/mods-enabled/files including
> configuration file /etc/raddb/mods-enabled/linelog including
> configuration file /etc/raddb/mods-enabled/logintime including
> configuration file /etc/raddb/mods-enabled/mschap including
> configuration file /etc/raddb/mods-enabled/ntlm_auth including
> configuration file /etc/raddb/mods-enabled/pap including configuration
> file /etc/raddb/mods-enabled/passwd including configuration file
> /etc/raddb/mods-enabled/preprocess
> including configuration file /etc/raddb/mods-enabled/radutmp including
> configuration file /etc/raddb/mods-enabled/realm including
> configuration file /etc/raddb/mods-enabled/replicate including
> configuration file /etc/raddb/mods-enabled/soh including configuration
> file /etc/raddb/mods-enabled/sradutmp including configuration file
> /etc/raddb/mods-enabled/unix including configuration file
> /etc/raddb/mods-enabled/unpack including configuration file
> /etc/raddb/mods-enabled/utf8 including configuration file
> /etc/raddb/mods-enabled/sql including configuration file
> /etc/raddb/mods-config/sql/main/mysql/queries.conf
> including files in directory /etc/raddb/policy.d/ including
> configuration file /etc/raddb/policy.d/accounting including
> configuration file /etc/raddb/policy.d/canonicalization
> including configuration file /etc/raddb/policy.d/control including
> configuration file /etc/raddb/policy.d/cui including configuration
> file /etc/raddb/policy.d/debug including configuration file
> /etc/raddb/policy.d/dhcp including configuration file
> /etc/raddb/policy.d/eap including configuration file
> /etc/raddb/policy.d/filter including configuration file
> /etc/raddb/policy.d/operator-name including files in directory
> /etc/raddb/sites-enabled/ including configuration file
> /etc/raddb/sites-enabled/default including configuration file
> /etc/raddb/sites-enabled/inner-tunnel
> main {
> security {
> user = "radiusd"
> group = "radiusd"
> allow_core_dumps = no
> }
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> }
> main {
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> libdir = "/usr/lib64/freeradius"
> radacctdir = "/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = no
> log {
> stripped_names = yes
> auth = yes
> auth_badpass = yes
> auth_goodpass = yes
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers #### proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> realm int {
> virtual_server = inner-tunnel
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipv4addr = *
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "udp"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 0
> }
> }
> Debugger not attached
> # Creating Auth-Type = mschap
> # Creating Auth-Type = eap
> # Creating Auth-Type = NTLMAuth
> # Creating Auth-Type = MS-CHAP
> # Creating Autz-Type = Status-Server
> # Creating Acct-Type = Status-Server
> # Creating Auth-Type = NTLM_AUTH
> radiusd: #### Instantiating modules #### modules {
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/raddb/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/raddb/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/raddb/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/raddb/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/raddb/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/raddb/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/raddb/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/raddb/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/raddb/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/raddb/mods-enabled/chap
> # Loaded module rlm_date
> # Loading module "date" from file /etc/raddb/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file /etc/raddb/mods-enabled/detail
> detail {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
> detail auth_log {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
> detail reply_log {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_dhcp
> # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/raddb/mods-enabled/digest
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /etc/raddb/mods-enabled/dynamic_clients
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/raddb/mods-enabled/eap
> eap {
> default_eap_type = "peap"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_exec
> # Loading module "echo" from file /etc/raddb/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loading module "exec" from file /etc/raddb/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file
> /etc/raddb/mods-enabled/expiration
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/raddb/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/raddb/mods-enabled/files
> files {
> filename = "/etc/raddb/mods-config/files/authorize"
> acctusersfile = "/etc/raddb/mods-config/files/accounting"
> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
> linelog {
> filename = "/var/log/radius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /etc/raddb/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/radius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = yes
> require_strong = yes
> with_ntdomain_hack = yes
> ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-
> OCTA.EDU} --challenge=%{mschap:Challenge:-00}
> --nt-response=%{mschap:NT-Response:-00}"
> ntlm_auth_timeout = 10
> passchange {
> ntlm_auth = "/usr/bin/ntlm_auth
> --helper-protocol=ntlm-change-password-1"
> ntlm_auth_username = "username: %{mschap:User-Name}"
> ntlm_auth_domain = "nt-domain: %{mschap:NT-Domain}"
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/usr/bin/ntlm_auth --request-nt-key
> --domain=OCTA.EDU --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/raddb/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Cleartext-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file
> /etc/raddb/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
> hints = "/etc/raddb/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_radutmp
> # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = no
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/raddb/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/radius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/raddb/mods-enabled/unix
> unix {
> radwtmp = "/var/log/radius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
> # Loaded module rlm_sql
> # Loading module "sql" from file /etc/raddb/mods-enabled/sql
> sql {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = 3306
> login = "root"
> password = <<< secret >>>
> radius_db = "radius"
> read_groups = yes
> read_profiles = yes
> read_clients = yes
> delete_stale_sessions = yes
> sql_user_name = "%{User-Name}"
> logfile = "/var/log/radius/sqllog.sql"
> default_user_profile = ""
> client_query = "SELECT id, nasname, shortname, type, secret,
> server FROM nas"
> authorize_check_query = "SELECT id, username, attribute,
> value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> authorize_reply_query = "SELECT id, username, attribute,
> value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> authorize_group_check_query = "SELECT id, groupname,
> attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
> authorize_group_reply_query = "SELECT id, groupname,
> attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
> group_membership_query = "SELECT groupname FROM radusergroup
> WHERE username = '%{SQL-User-Name}' ORDER BY priority"
> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
> username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
> simul_verify_query = "SELECT radacctid, acctsessionid,
> username, nasipaddress, nasportid, framedipaddress, callingstationid,
> framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}.query}"
> type {
> accounting-on {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> }
> accounting-off {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> }
> start {
> query = "INSERT INTO radacct (acctsessionid,
> acctuniqueid, username, realm,
> nasipaddress, nasportid, nasporttype, acctstarttime,
> acctupdatetime, acctstoptime, acctsessiontime,
> acctauthentic, connectinfo_start, connectinfo_stop,
> acctinputoctets, acctoutputoctets, calledstationid,
> callingstationid, acctterminatecause, servicetype,
> framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
> '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}),
> FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
> '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
> '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
> }
> interim-update {
> query = "UPDATE radacct SET acctupdatetime =
> (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval =
> %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
> framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> '%{Acct-Unique-Session-Id}'"
> }
> stop {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> }
> }
> }
> post-auth {
> reference = ".query"
> query = "INSERT INTO radpostauth (username, pass, reply,
> authdate) VALUES ( '%{SQL-User-Name}',
> '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S')"
> }
> }
> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked Creating attribute SQL-Group
> instantiate {
> }
> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
> # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
> # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
> # Instantiating module "userlock" from file
> /etc/raddb/mods-enabled/always
> # Instantiating module "notfound" from file
> /etc/raddb/mods-enabled/always
> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
> # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
> # Instantiating module "attr_filter.post-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec" found in filter list for realm
> "DEFAULT".
> # Instantiating module "attr_filter.access_challenge" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /etc/raddb/mods-config/attr_filter/accounting_response
> # Instantiating module "cache_eap" from file
> /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver
> rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
> # Instantiating module "auth_log" from file
> /etc/raddb/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /etc/raddb/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/etc/raddb/certs/server.pem"
> certificate_file = "/etc/raddb/certs/server.pem"
> ca_file = "/etc/raddb/certs/ca.pem"
> private_key_password = <<< secret >>>
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> ecdh_curve = "prime256v1"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = yes
> use_tunneled_reply = yes
> proxy_tunneled_request_as_eap = no
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = yes
> identity = "FreeRADIUS"
> }
> # Instantiating module "expiration" from file
> /etc/raddb/mods-enabled/expiration
> # Instantiating module "files" from file
> /etc/raddb/mods-enabled/files reading pairlist file
> /etc/raddb/mods-config/files/authorize
> reading pairlist file /etc/raddb/mods-config/files/accounting
> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
> # Instantiating module "linelog" from file
> /etc/raddb/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /etc/raddb/mods-enabled/linelog
> # Instantiating module "logintime" from file
> /etc/raddb/mods-enabled/logintime
> # Instantiating module "mschap" from file
> /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
> # Instantiating module "etc_passwd" from file
> /etc/raddb/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "preprocess" from file
> /etc/raddb/mods-enabled/preprocess
> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /etc/raddb/mods-config/preprocess/hints
> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /etc/raddb/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
> rlm_sql_mysql: libmysql version: 10.1.37-MariaDB
> mysql {
> tls {
> }
> warnings = "auto"
> }
> rlm_sql (sql): Attempting to connect to database "radius"
> rlm_sql (sql): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending
> slots used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> (sql): Opening additional connection (1), 1 of 31 pending slots used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> (sql): Opening additional connection (2), 1 of 30 pending slots used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> (sql): Opening additional connection (3), 1 of 29 pending slots used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> (sql): Opening additional connection (4), 1 of 28 pending slots used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> (sql): Processing generate_sql_clients rlm_sql (sql) in
> generate_sql_clients: query is SELECT id, nasname, shortname, type,
> secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql
> (sql): Executing select query: SELECT id, nasname, shortname, type,
> secret, server FROM nas rlm_sql (sql): Adding client 10.0.0.38 (domain
> controller) to global clients list rlm_sql (10.0.0.38): Client "domain
> controller" (sql) added rlm_sql (sql): Adding client 10.0.0.39 (domain
> contr-2) to global clients list rlm_sql (10.0.0.39): Client "domain
> contr-2" (sql) added rlm_sql (sql): Adding client 10.1.172.16 (team2)
> to global clients list rlm_sql (10.1.172.16): Client "team2" (sql)
> added rlm_sql (sql): Adding client 10.1.172.18 (team4) to global
> clients list rlm_sql (10.1.172.18): Client "team4" (sql) added rlm_sql
> (sql): Adding client 10.1.172.19 (team5) to global clients list
> rlm_sql (10.1.172.19): Client "team5" (sql) added rlm_sql (sql):
> Adding client 10.1.172.20 (team6) to global clients list rlm_sql
> (10.1.172.20): Client "team6" (sql) added rlm_sql (sql): Adding client
> 10.0.0.1 (Local network) to global clients list rlm_sql (10.0.0.1):
> Client "Local network" (sql) added rlm_sql (sql): Adding client
> 192.168.20.1 (ACCT) to global clients list rlm_sql (192.168.20.1):
> Client "ACCT" (sql) added rlm_sql (sql): Released connection (0) Need
> 5 more connections to reach 10 spares rlm_sql (sql): Opening
> additional connection (5), 1 of 27 pending slots used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 10.1.37-MariaDB, protocol version 10 } #
> modules
> radiusd: #### Loading Virtual Servers #### server { # from file
> /etc/raddb/radiusd.conf } # server server default { # from file
> /etc/raddb/sites-enabled/default # Loading authenticate {...} #
> Loading authorize {...} Ignoring "ldap" (see
> raddb/mods-available/README.rst) # Loading preacct {...} # Loading
> accounting {...} } # server default server inner-tunnel { # from file
> /etc/raddb/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading session {...}
> # Loading post-auth {...}
> } # server inner-tunnel
> radiusd: #### Opening IP addresses and Ports #### listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 0
> }
> Failed binding to auth address * port 1812 bound to server default:
> Address already in use
> /etc/raddb/sites-enabled/default[60]: Error binding to port for
> 0.0.0.0 port 1812
>
> ------------------------------
>
> Subject: Digest Footer
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> ------------------------------
>
> End of Freeradius-Users Digest, Vol 165, Issue 69
> *************************************************
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
------------------------------
Subject: Digest Footer
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
------------------------------
End of Freeradius-Users Digest, Vol 165, Issue 71
*************************************************
-------------- next part --------------
A non-text attachment was scrubbed...
Name: debug-radius.png
Type: image/png
Size: 66207 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20190128/6c54eb31/attachment-0001.png>
More information about the Freeradius-Users
mailing list