Contents of Freeradius-Users digest...Google Authenticator
Eero Volotinen
eero.volotinen at iki.fi
Mon Jan 28 08:38:52 CET 2019
In my solution, I decided to keep authenticator files in homedirectories
and coded simple gui to activate them without any knowledge of linux
commands.
Eero
On Mon, Jan 28, 2019, 09:12 Eero Volotinen <eero.volotinen at iki.fi wrote:
> works fine. remember to run freeradius as root or else it cannot access
> google authenticator files
>
> Eero
>
> On Mon, Jan 28, 2019, 09:09 Soklang Sum <soklang.sum at cambotech.com wrote:
>
>> Dear Team Freeradius,
>>
>> I would like to ask about FreeRADIUS work with google authenticator (2FA)
>> or not?
>> I have tried to install freeRADIUS with google authenticator but it
>> doesn't work, when I try install following the guideline any website like
>> https://networkjutsu.com/freeradius-google-authenticator/ it always
>> rejected.
>>
>> So that why I want to make sure from team expertise freeRADIUS it work
>> with google authenticator or not?
>>
>> But I saw in the guideline it works but for me never work.
>>
>> Please help feedback soon as possible.
>>
>> Thanks
>>
>> -----Original Message-----
>> From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
>> cambotech.com at lists.freeradius.org> On Behalf Of
>> freeradius-users-request at lists.freeradius.org
>> Sent: Monday, January 28, 2019 11:42 AM
>> To: freeradius-users at lists.freeradius.org
>> Subject: Freeradius-Users Digest, Vol 165, Issue 69
>>
>> Send Freeradius-Users mailing list submissions to
>> freeradius-users at lists.freeradius.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.freeradius.org/mailman/listinfo/freeradius-users
>> or, via email, send a message with subject or body 'help' to
>> freeradius-users-request at lists.freeradius.org
>>
>> You can reach the person managing the list at
>> freeradius-users-owner at lists.freeradius.org
>>
>> When replying, please edit your Subject line so it is more specific than
>> "Re: Contents of Freeradius-Users digest..."
>>
>>
>> Today's Topics:
>>
>> 1. EAP-GTC w/ "PAP-like" LDAP authentication (Ian Pilcher)
>> 2. Re: EAP-GTC w/ "PAP-like" LDAP authentication (Alan DeKok)
>> 3. Multiple UserDN for different LDAPs (diego.barzon at tiscali.it)
>> 4. Freeradius-Users Digest, Vol 165, Issue 68 (Soklang Sum)
>> 5. radius accounting issue. (slnarayanan at nitt.edu)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sun, 27 Jan 2019 11:43:12 -0600
>> From: Ian Pilcher <arequipeno at gmail.com>
>> To: freeradius-users at lists.freeradius.org
>> Subject: EAP-GTC w/ "PAP-like" LDAP authentication
>> Message-ID: <q2kqjg$4fa3$1 at blaine.gmane.org>
>> Content-Type: text/plain; charset=utf-8; format=flowed
>>
>> I am struggling to find documentation of how to set up $SUBJECT.
>>
>> I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC using
>> a file-based test user, but the number of different protocols and
>> configurations supported and documented in the config files means that I
>> haven't been able to figure out how to achieve what I want.
>>
>> Any hints, links, etc. would be appreciated.
>>
>> Thanks!
>>
>> --
>> ========================================================================
>> Ian Pilcher arequipeno at gmail.com
>> -------- "I grew up before Mark Zuckerberg invented friendship" --------
>> ========================================================================
>>
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Sun, 27 Jan 2019 14:17:58 -0500
>> From: Alan DeKok <aland at deployingradius.com>
>> To: FreeRadius users mailing list
>> <freeradius-users at lists.freeradius.org>
>> Subject: Re: EAP-GTC w/ "PAP-like" LDAP authentication
>> Message-ID: <165EB1A7-2D19-4AAD-BD48-719D157BC5C5 at deployingradius.com>
>> Content-Type: text/plain; charset=us-ascii
>>
>> On Jan 27, 2019, at 12:43 PM, Ian Pilcher <arequipeno at gmail.com> wrote:
>> >
>> > I am struggling to find documentation of how to set up $SUBJECT.
>> >
>> > I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC using
>> > a file-based test user, but the number of different protocols and
>> > configurations supported and documented in the config files means that I
>> > haven't been able to figure out how to achieve what I want.
>>
>> (a) Make sure PEAP works with certificates.
>>
>> (b) configure and enable LDAP. See mods-available/ldap
>>
>> Once the LDAP module is available, the server will automatically use it.
>>
>> And, the server will automatically grab passwords from LDAP. And, the
>> server will automatically use those passwords to do EAP-GTC.
>>
>> It really is that easy. The key thing is to *let the server do the
>> work*. Don't try to "force" a particular kind of authentication. EAP
>> doesn't work that way.
>>
>> If you're using Active Directory, it's harder. Because Active
>> Directory isn't a real LDAP server.
>>
>> It also helps to describe what you've done, what happened, and why you
>> think it's wrong. Otherwise, we're limited to:
>>
>> Q: I tried stuff and it doesn't work. What do I do?
>> A: Try different stuff
>>
>> Which isn't helpful to anyone. Better questions means better answers.
>>
>> Alan DeKok.
>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 3
>> Date: Mon, 28 Jan 2019 00:27:28 +0100
>> From: diego.barzon at tiscali.it
>> To: <freeradius-users at lists.freeradius.org>
>> Subject: Multiple UserDN for different LDAPs
>> Message-ID: <a5fefc494d4f1514bf2d35eb706b2edb at tiscali.it>
>> Content-Type: text/plain; charset=UTF-8
>>
>>
>>
>> Hi all,
>> here's the problem.
>> I need to authenticate against 2
>> different LDAP servers, populated with different data. I don't need
>> specific information (like group memberships or so): trying to bind with
>> the credentials is enough.
>> In 'authorize' I set Auth to LDAP and in
>> authenticate I put something like this:
>> ldap1{
>> fail = 1
>> invalid = 2
>>
>> reject = 3
>> }
>> if (!ok) {
>> ldap2
>> }
>> ldap1 and ldap2 configurations are on
>> separate files, they are different in everything: the former's a DC, the
>> latter an openldap server. Moreover they have different BaseDN.
>> It
>> looks like freeradius set UserDN for the first ldap and tries to use the
>> same on the second. I think I need two different values for LDAP-UserDN,
>> which is not possible, but I read there's some kind of workaround
>> involving writing on files/authorize but honestly I didn't understand
>> what I'm supposed to do.
>> Thanks in advance!
>>
>>
>>
>> Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per
>> sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY!
>> http://tisca.li/myopen
>>
>>
>>
>> ------------------------------
>>
>> Message: 4
>> Date: Mon, 28 Jan 2019 11:14:50 +0700
>> From: "Soklang Sum" <soklang.sum at cambotech.com>
>> To: <freeradius-users at lists.freeradius.org>
>> Subject: Freeradius-Users Digest, Vol 165, Issue 68
>> Message-ID: <000201d4b6c0$05465b20$0fd31160$@cambotech.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Dear Team Freeradius,
>>
>> I would like to ask about FreeRADIUS work with google authenticator (2FA)
>> or not?
>> I have tried to install freeRADIUS with google authenticator but it
>> doesn't work, when I try install following the guideline any website like
>> https://networkjutsu.com/freeradius-google-authenticator/ it always
>> rejected.
>>
>> So that why I want to make sure from team expertise freeRADIUS it work
>> with google authenticator or not?
>>
>> But I saw in the guideline it works but for me never work.
>>
>> Please help feedback soon as possible.
>>
>> Thanks
>>
>> ===================
>>
>> -----Original Message-----
>> From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
>> cambotech.com at lists.freeradius.org> On Behalf Of
>> freeradius-users-request at lists.freeradius.org
>> Sent: Sunday, January 27, 2019 6:00 PM
>> To: freeradius-users at lists.freeradius.org
>> Subject: Freeradius-Users Digest, Vol 165, Issue 68
>>
>> Send Freeradius-Users mailing list submissions to
>> freeradius-users at lists.freeradius.org
>>
>> To subscribe or unsubscribe via the World Wide Web, visit
>> http://lists.freeradius.org/mailman/listinfo/freeradius-users
>> or, via email, send a message with subject or body 'help' to
>> freeradius-users-request at lists.freeradius.org
>>
>> You can reach the person managing the list at
>> freeradius-users-owner at lists.freeradius.org
>>
>> When replying, please edit your Subject line so it is more specific than
>> "Re: Contents of Freeradius-Users digest..."
>>
>>
>> Today's Topics:
>>
>> 1. Session start times issues (Philemon Jaomalaza)
>> 2. Re: Session start times issues (Alan DeKok)
>>
>>
>> ----------------------------------------------------------------------
>>
>> Message: 1
>> Date: Sat, 26 Jan 2019 16:43:23 +0300
>> From: "Philemon Jaomalaza" <philemon.jaomalaza at gmail.com>
>> To: "'FreeRadius users mailing list'"
>> <freeradius-users at lists.freeradius.org>
>> Subject: Session start times issues
>> Message-ID: <031301d4b57d$1e29c3a0$5a7d4ae0$@gmail.com>
>> Content-Type: text/plain; charset="utf-8"
>>
>> Hello,
>> If the nas has a wrong date and time, the sqlcounter does not work
>> correctly.
>>
>> The attribute Event-Timestamp got the wrong data and time from nas.
>>
>> I found this features in preacct substitution:
>>
>> update request {
>> &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
>> %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
>> }
>>
>> I uncomente it but nothing change.
>>
>> Where is the best way to have the good local time of radius server on
>> "acctstarttime" column of "radacct" on sql database ?
>>
>> JMLZ
>>
>>
>>
>> ---
>> L'absence de virus dans ce courrier électronique a été vérifiée par le
>> logiciel antivirus Avast.
>> https://www.avast.com/antivirus
>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 2
>> Date: Sat, 26 Jan 2019 14:35:02 -0500
>> From: Alan DeKok <aland at deployingradius.com>
>> To: FreeRadius users mailing list
>> <freeradius-users at lists.freeradius.org>
>> Subject: Re: Session start times issues
>> Message-ID: <717983BF-2594-4316-807F-0726F706BD53 at deployingradius.com>
>> Content-Type: text/plain; charset=us-ascii
>>
>> On Jan 26, 2019, at 8:43 AM, Philemon Jaomalaza <
>> philemon.jaomalaza at gmail.com> wrote:
>> > If the nas has a wrong date and time, the sqlcounter does not work
>> correctly.
>>
>> If I take the tires off of my car, it doesn't drive well.
>>
>> Solution: fix the REAL problem.
>>
>> > The attribute Event-Timestamp got the wrong data and time from nas.
>>
>> Fix the NAS. Anything else is an ugly hack.
>>
>> > I found this features in preacct substitution:
>> >
>> > update request {
>> > &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
>> %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
>> > }
>> >
>> > I uncomente it but nothing change.
>> >
>> > Where is the best way to have the good local time of radius server on
>> "acctstarttime" column of "radacct" on sql database ?
>>
>> Fix the NAS.
>>
>> Alan DeKok.
>>
>>
>>
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>> ------------------------------
>>
>> End of Freeradius-Users Digest, Vol 165, Issue 68
>> *************************************************
>>
>>
>>
>>
>> ------------------------------
>>
>> Message: 5
>> Date: Mon, 28 Jan 2019 10:05:15 +0530
>> From: slnarayanan at nitt.edu
>> To: FreeRadius users mailing list
>> <freeradius-users at lists.freeradius.org>
>> Subject: radius accounting issue.
>> Message-ID:
>> <20190128100515.Horde.b8e9HpA3uLd-EHwBhBcx3A6 at webmail.nitt.edu>
>> Content-Type: text/plain; charset="utf-8"; Format="flowed";
>> DelSp="Yes"
>>
>>
>> Dear All,
>>
>> I have a problem with accounting .Everything is working fine on
>> freeradius.Login& authentication sql everything is working fine.But i
>> have a problem in accounting pocket.We are using sonciwall firwall in
>> our campus.Those who logged through our radius server the login
>> information (Radius Accounting) information need to display on
>> sonicwall user's page.The UDP pocket 1813 not send to our firewall
>> ip.In the firewall i have enable policy allow to all our local
>> network.I have attached my radiususd -X log to this mail.Kindly
>> provide the solution for resolve my issue.The Radius Accounting
>> information now shows on radacct in the phpmyadmin.
>>
>> Regards.
>> S.Lakshmi narayanan
>>
>> -------------- next part --------------
>> FreeRADIUS Version 3.0.13
>> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>> PARTICULAR PURPOSE
>> You may redistribute copies of FreeRADIUS under the terms of the
>> GNU General Public License
>> For more information about these matters, see the file named COPYRIGHT
>> Starting - reading configuration files ...
>> including dictionary file /usr/share/freeradius/dictionary
>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>> including dictionary file /usr/share/freeradius/dictionary.vqp
>> including dictionary file /etc/raddb/dictionary
>> including configuration file /etc/raddb/radiusd.conf
>> including configuration file /etc/raddb/proxy.conf
>> including configuration file /etc/raddb/clients.conf
>> including files in directory /etc/raddb/mods-enabled/
>> including configuration file /etc/raddb/mods-enabled/always
>> including configuration file /etc/raddb/mods-enabled/attr_filter
>> including configuration file /etc/raddb/mods-enabled/cache_eap
>> including configuration file /etc/raddb/mods-enabled/chap
>> including configuration file /etc/raddb/mods-enabled/date
>> including configuration file /etc/raddb/mods-enabled/detail
>> including configuration file /etc/raddb/mods-enabled/detail.log
>> including configuration file /etc/raddb/mods-enabled/dhcp
>> including configuration file /etc/raddb/mods-enabled/digest
>> including configuration file /etc/raddb/mods-enabled/dynamic_clients
>> including configuration file /etc/raddb/mods-enabled/eap
>> including configuration file /etc/raddb/mods-enabled/echo
>> including configuration file /etc/raddb/mods-enabled/exec
>> including configuration file /etc/raddb/mods-enabled/expiration
>> including configuration file /etc/raddb/mods-enabled/expr
>> including configuration file /etc/raddb/mods-enabled/files
>> including configuration file /etc/raddb/mods-enabled/linelog
>> including configuration file /etc/raddb/mods-enabled/logintime
>> including configuration file /etc/raddb/mods-enabled/mschap
>> including configuration file /etc/raddb/mods-enabled/ntlm_auth
>> including configuration file /etc/raddb/mods-enabled/pap
>> including configuration file /etc/raddb/mods-enabled/passwd
>> including configuration file /etc/raddb/mods-enabled/preprocess
>> including configuration file /etc/raddb/mods-enabled/radutmp
>> including configuration file /etc/raddb/mods-enabled/realm
>> including configuration file /etc/raddb/mods-enabled/replicate
>> including configuration file /etc/raddb/mods-enabled/soh
>> including configuration file /etc/raddb/mods-enabled/sradutmp
>> including configuration file /etc/raddb/mods-enabled/unix
>> including configuration file /etc/raddb/mods-enabled/unpack
>> including configuration file /etc/raddb/mods-enabled/utf8
>> including configuration file /etc/raddb/mods-enabled/sql
>> including configuration file
>> /etc/raddb/mods-config/sql/main/mysql/queries.conf
>> including files in directory /etc/raddb/policy.d/
>> including configuration file /etc/raddb/policy.d/accounting
>> including configuration file /etc/raddb/policy.d/canonicalization
>> including configuration file /etc/raddb/policy.d/control
>> including configuration file /etc/raddb/policy.d/cui
>> including configuration file /etc/raddb/policy.d/debug
>> including configuration file /etc/raddb/policy.d/dhcp
>> including configuration file /etc/raddb/policy.d/eap
>> including configuration file /etc/raddb/policy.d/filter
>> including configuration file /etc/raddb/policy.d/operator-name
>> including files in directory /etc/raddb/sites-enabled/
>> including configuration file /etc/raddb/sites-enabled/default
>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>> main {
>> security {
>> user = "radiusd"
>> group = "radiusd"
>> allow_core_dumps = no
>> }
>> name = "radiusd"
>> prefix = "/usr"
>> localstatedir = "/var"
>> logdir = "/var/log/radius"
>> run_dir = "/var/run/radiusd"
>> }
>> main {
>> name = "radiusd"
>> prefix = "/usr"
>> localstatedir = "/var"
>> sbindir = "/usr/sbin"
>> logdir = "/var/log/radius"
>> run_dir = "/var/run/radiusd"
>> libdir = "/usr/lib64/freeradius"
>> radacctdir = "/var/log/radius/radacct"
>> hostname_lookups = no
>> max_request_time = 30
>> cleanup_delay = 5
>> max_requests = 16384
>> pidfile = "/var/run/radiusd/radiusd.pid"
>> checkrad = "/usr/sbin/checkrad"
>> debug_level = 0
>> proxy_requests = no
>> log {
>> stripped_names = yes
>> auth = yes
>> auth_badpass = yes
>> auth_goodpass = yes
>> colourise = yes
>> msg_denied = "You are already logged in - access denied"
>> }
>> resources {
>> }
>> security {
>> max_attributes = 200
>> reject_delay = 1.000000
>> status_server = yes
>> }
>> }
>> radiusd: #### Loading Realms and Home Servers ####
>> proxy server {
>> retry_delay = 5
>> retry_count = 3
>> default_fallback = no
>> dead_time = 120
>> wake_all_if_all_dead = no
>> }
>> home_server localhost {
>> ipaddr = 127.0.0.1
>> port = 1812
>> type = "auth"
>> secret = <<< secret >>>
>> response_window = 20.000000
>> response_timeouts = 1
>> max_outstanding = 65536
>> zombie_period = 40
>> status_check = "status-server"
>> ping_interval = 30
>> check_interval = 30
>> check_timeout = 4
>> num_answers_to_alive = 3
>> revive_interval = 120
>> limit {
>> max_connections = 16
>> max_requests = 0
>> lifetime = 0
>> idle_timeout = 0
>> }
>> coa {
>> irt = 2
>> mrt = 16
>> mrc = 5
>> mrd = 30
>> }
>> }
>> home_server_pool my_auth_failover {
>> type = fail-over
>> home_server = localhost
>> }
>> realm example.com {
>> auth_pool = my_auth_failover
>> }
>> realm LOCAL {
>> }
>> realm int {
>> virtual_server = inner-tunnel
>> }
>> radiusd: #### Loading Clients ####
>> client localhost {
>> ipv4addr = *
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> nas_type = "other"
>> proto = "udp"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 0
>> }
>> }
>> Debugger not attached
>> # Creating Auth-Type = mschap
>> # Creating Auth-Type = eap
>> # Creating Auth-Type = NTLMAuth
>> # Creating Auth-Type = MS-CHAP
>> # Creating Autz-Type = Status-Server
>> # Creating Acct-Type = Status-Server
>> # Creating Auth-Type = NTLM_AUTH
>> radiusd: #### Instantiating modules ####
>> modules {
>> # Loaded module rlm_always
>> # Loading module "reject" from file /etc/raddb/mods-enabled/always
>> always reject {
>> rcode = "reject"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "fail" from file /etc/raddb/mods-enabled/always
>> always fail {
>> rcode = "fail"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "ok" from file /etc/raddb/mods-enabled/always
>> always ok {
>> rcode = "ok"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "handled" from file /etc/raddb/mods-enabled/always
>> always handled {
>> rcode = "handled"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "invalid" from file /etc/raddb/mods-enabled/always
>> always invalid {
>> rcode = "invalid"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "userlock" from file /etc/raddb/mods-enabled/always
>> always userlock {
>> rcode = "userlock"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "notfound" from file /etc/raddb/mods-enabled/always
>> always notfound {
>> rcode = "notfound"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "noop" from file /etc/raddb/mods-enabled/always
>> always noop {
>> rcode = "noop"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "updated" from file /etc/raddb/mods-enabled/always
>> always updated {
>> rcode = "updated"
>> simulcount = 0
>> mpp = no
>> }
>> # Loaded module rlm_attr_filter
>> # Loading module "attr_filter.post-proxy" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.post-proxy {
>> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.pre-proxy" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.pre-proxy {
>> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_reject" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.access_reject {
>> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_challenge" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.access_challenge {
>> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.accounting_response" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.accounting_response {
>> filename =
>> "/etc/raddb/mods-config/attr_filter/accounting_response"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loaded module rlm_cache
>> # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
>> cache cache_eap {
>> driver = "rlm_cache_rbtree"
>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>> ttl = 15
>> max_entries = 0
>> epoch = 0
>> add_stats = no
>> }
>> # Loaded module rlm_chap
>> # Loading module "chap" from file /etc/raddb/mods-enabled/chap
>> # Loaded module rlm_date
>> # Loading module "date" from file /etc/raddb/mods-enabled/date
>> date {
>> format = "%b %e %Y %H:%M:%S %Z"
>> }
>> # Loaded module rlm_detail
>> # Loading module "detail" from file /etc/raddb/mods-enabled/detail
>> detail {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
>> detail auth_log {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "reply_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> detail reply_log {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "pre_proxy_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> detail pre_proxy_log {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "post_proxy_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> detail post_proxy_log {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_dhcp
>> # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
>> # Loaded module rlm_digest
>> # Loading module "digest" from file /etc/raddb/mods-enabled/digest
>> # Loaded module rlm_dynamic_clients
>> # Loading module "dynamic_clients" from file
>> /etc/raddb/mods-enabled/dynamic_clients
>> # Loaded module rlm_eap
>> # Loading module "eap" from file /etc/raddb/mods-enabled/eap
>> eap {
>> default_eap_type = "peap"
>> timer_expire = 60
>> ignore_unknown_eap_types = no
>> cisco_accounting_username_bug = no
>> max_sessions = 16384
>> }
>> # Loaded module rlm_exec
>> # Loading module "echo" from file /etc/raddb/mods-enabled/echo
>> exec echo {
>> wait = yes
>> program = "/bin/echo %{User-Name}"
>> input_pairs = "request"
>> output_pairs = "reply"
>> shell_escape = yes
>> }
>> # Loading module "exec" from file /etc/raddb/mods-enabled/exec
>> exec {
>> wait = no
>> input_pairs = "request"
>> shell_escape = yes
>> timeout = 10
>> }
>> # Loaded module rlm_expiration
>> # Loading module "expiration" from file
>> /etc/raddb/mods-enabled/expiration
>> # Loaded module rlm_expr
>> # Loading module "expr" from file /etc/raddb/mods-enabled/expr
>> expr {
>> safe_characters =
>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
>> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>> }
>> # Loaded module rlm_files
>> # Loading module "files" from file /etc/raddb/mods-enabled/files
>> files {
>> filename = "/etc/raddb/mods-config/files/authorize"
>> acctusersfile = "/etc/raddb/mods-config/files/accounting"
>> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
>> }
>> # Loaded module rlm_linelog
>> # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
>> linelog {
>> filename = "/var/log/radius/linelog"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = "This is a log message for %{User-Name}"
>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>> }
>> # Loading module "log_accounting" from file
>> /etc/raddb/mods-enabled/linelog
>> linelog log_accounting {
>> filename = "/var/log/radius/linelog-accounting"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = ""
>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>> }
>> # Loaded module rlm_logintime
>> # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
>> logintime {
>> minimum_timeout = 60
>> }
>> # Loaded module rlm_mschap
>> # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
>> mschap {
>> use_mppe = yes
>> require_encryption = yes
>> require_strong = yes
>> with_ntdomain_hack = yes
>> ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
>> --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-
>> OCTA.EDU} --challenge=%{mschap:Challenge:-00}
>> --nt-response=%{mschap:NT-Response:-00}"
>> ntlm_auth_timeout = 10
>> passchange {
>> ntlm_auth = "/usr/bin/ntlm_auth
>> --helper-protocol=ntlm-change-password-1"
>> ntlm_auth_username = "username: %{mschap:User-Name}"
>> ntlm_auth_domain = "nt-domain: %{mschap:NT-Domain}"
>> }
>> allow_retry = yes
>> winbind_retry_with_normalised_username = no
>> }
>> # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
>> exec ntlm_auth {
>> wait = yes
>> program = "/usr/bin/ntlm_auth --request-nt-key --domain=OCTA.EDU
>> --username=%{mschap:User-Name} --password=%{User-Password}"
>> shell_escape = yes
>> }
>> # Loaded module rlm_pap
>> # Loading module "pap" from file /etc/raddb/mods-enabled/pap
>> pap {
>> normalise = yes
>> }
>> # Loaded module rlm_passwd
>> # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
>> passwd etc_passwd {
>> filename = "/etc/passwd"
>> format = "*User-Name:Cleartext-Password:"
>> delimiter = ":"
>> ignore_nislike = no
>> ignore_empty = yes
>> allow_multiple_keys = no
>> hash_size = 100
>> }
>> # Loaded module rlm_preprocess
>> # Loading module "preprocess" from file
>> /etc/raddb/mods-enabled/preprocess
>> preprocess {
>> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
>> hints = "/etc/raddb/mods-config/preprocess/hints"
>> with_ascend_hack = no
>> ascend_channels_per_line = 23
>> with_ntdomain_hack = no
>> with_specialix_jetstream_hack = no
>> with_cisco_vsa_hack = no
>> with_alvarion_vsa_hack = no
>> }
>> # Loaded module rlm_radutmp
>> # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
>> radutmp {
>> filename = "/var/log/radius/radutmp"
>> username = "%{User-Name}"
>> case_sensitive = no
>> check_with_nas = yes
>> permissions = 384
>> caller_id = yes
>> }
>> # Loaded module rlm_realm
>> # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
>> realm IPASS {
>> format = "prefix"
>> delimiter = "/"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
>> realm suffix {
>> format = "suffix"
>> delimiter = "@"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
>> realm realmpercent {
>> format = "suffix"
>> delimiter = "%"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
>> realm ntdomain {
>> format = "prefix"
>> delimiter = "\\"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loaded module rlm_replicate
>> # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
>> # Loaded module rlm_soh
>> # Loading module "soh" from file /etc/raddb/mods-enabled/soh
>> soh {
>> dhcp = yes
>> }
>> # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
>> radutmp sradutmp {
>> filename = "/var/log/radius/sradutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 420
>> caller_id = no
>> }
>> # Loaded module rlm_unix
>> # Loading module "unix" from file /etc/raddb/mods-enabled/unix
>> unix {
>> radwtmp = "/var/log/radius/radwtmp"
>> }
>> Creating attribute Unix-Group
>> # Loaded module rlm_unpack
>> # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
>> # Loaded module rlm_utf8
>> # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
>> # Loaded module rlm_sql
>> # Loading module "sql" from file /etc/raddb/mods-enabled/sql
>> sql {
>> driver = "rlm_sql_mysql"
>> server = "localhost"
>> port = 3306
>> login = "root"
>> password = <<< secret >>>
>> radius_db = "radius"
>> read_groups = yes
>> read_profiles = yes
>> read_clients = yes
>> delete_stale_sessions = yes
>> sql_user_name = "%{User-Name}"
>> logfile = "/var/log/radius/sqllog.sql"
>> default_user_profile = ""
>> client_query = "SELECT id, nasname, shortname, type, secret,
>> server FROM nas"
>> authorize_check_query = "SELECT id, username, attribute, value,
>> op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
>> authorize_reply_query = "SELECT id, username, attribute, value,
>> op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
>> authorize_group_check_query = "SELECT id, groupname, attribute,
>> Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
>> authorize_group_reply_query = "SELECT id, groupname, attribute,
>> value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
>> group_membership_query = "SELECT groupname FROM radusergroup
>> WHERE username = '%{SQL-User-Name}' ORDER BY priority"
>> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username
>> = '%{SQL-User-Name}' AND acctstoptime IS NULL"
>> simul_verify_query = "SELECT radacctid, acctsessionid, username,
>> nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
>> FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
>> safe_characters =
>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>> accounting {
>> reference = "%{tolower:type.%{Acct-Status-Type}.query}"
>> type {
>> accounting-on {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
>> '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
>> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
>> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
>> acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
>> }
>> accounting-off {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
>> '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
>> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
>> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
>> acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
>> }
>> start {
>> query = "INSERT INTO radacct (acctsessionid,
>> acctuniqueid, username, realm,
>> nasipaddress, nasportid, nasporttype, acctstarttime,
>> acctupdatetime, acctstoptime, acctsessiontime,
>> acctauthentic, connectinfo_start, connectinfo_stop,
>> acctinputoctets, acctoutputoctets, calledstationid,
>> callingstationid, acctterminatecause, servicetype,
>> framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
>> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
>> '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
>> FROM_UNIXTIME(%{integer:Event-Timestamp}),
>> FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}',
>> '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
>> '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
>> '%{Framed-IP-Address}')"
>> }
>> interim-update {
>> query = "UPDATE radacct SET acctupdatetime =
>> (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
>> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval =
>> %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
>> framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
>> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
>> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
>> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
>> '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
>> '%{Acct-Unique-Session-Id}'"
>> }
>> stop {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
>> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
>> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
>> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
>> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
>> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
>> AcctUniqueId = '%{Acct-Unique-Session-Id}'"
>> }
>> }
>> }
>> post-auth {
>> reference = ".query"
>> query = "INSERT INTO radpostauth (username, pass, reply,
>> authdate) VALUES ( '%{SQL-User-Name}',
>> '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
>> }
>> }
>> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
>> linked
>> Creating attribute SQL-Group
>> instantiate {
>> }
>> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
>> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
>> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
>> # Instantiating module "handled" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "invalid" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "userlock" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "notfound" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
>> # Instantiating module "updated" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "attr_filter.post-proxy" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
>> # Instantiating module "attr_filter.pre-proxy" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
>> # Instantiating module "attr_filter.access_reject" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
>> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
>> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
>> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
>> "FreeRADIUS-Response-Delay-USec" found in filter list for realm
>> "DEFAULT".
>> # Instantiating module "attr_filter.access_challenge" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
>> # Instantiating module "attr_filter.accounting_response" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file
>> /etc/raddb/mods-config/attr_filter/accounting_response
>> # Instantiating module "cache_eap" from file
>> /etc/raddb/mods-enabled/cache_eap
>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
>> loaded and linked
>> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
>> # Instantiating module "auth_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
>> detail output
>> # Instantiating module "reply_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> # Instantiating module "pre_proxy_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> # Instantiating module "post_proxy_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
>> # Linked to sub-module rlm_eap_tls
>> tls {
>> tls = "tls-common"
>> }
>> tls-config tls-common {
>> verify_depth = 0
>> ca_path = "/etc/raddb/certs"
>> pem_file_type = yes
>> private_key_file = "/etc/raddb/certs/server.pem"
>> certificate_file = "/etc/raddb/certs/server.pem"
>> ca_file = "/etc/raddb/certs/ca.pem"
>> private_key_password = <<< secret >>>
>> fragment_size = 1024
>> include_length = yes
>> auto_chain = yes
>> check_crl = no
>> check_all_crl = no
>> cipher_list = "DEFAULT"
>> cipher_server_preference = no
>> ecdh_curve = "prime256v1"
>> cache {
>> enable = no
>> lifetime = 24
>> max_entries = 255
>> }
>> verify {
>> skip_if_ocsp_ok = no
>> }
>> ocsp {
>> enable = no
>> override_cert_url = yes
>> url = "http://127.0.0.1/ocsp/"
>> use_nonce = yes
>> timeout = 0
>> softfail = no
>> }
>> }
>> # Linked to sub-module rlm_eap_ttls
>> ttls {
>> tls = "tls-common"
>> default_eap_type = "md5"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = no
>> virtual_server = "inner-tunnel"
>> include_length = yes
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_peap
>> peap {
>> tls = "tls-common"
>> default_eap_type = "mschapv2"
>> copy_request_to_tunnel = yes
>> use_tunneled_reply = yes
>> proxy_tunneled_request_as_eap = no
>> virtual_server = "inner-tunnel"
>> soh = no
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_mschapv2
>> mschapv2 {
>> with_ntdomain_hack = no
>> send_error = yes
>> identity = "FreeRADIUS"
>> }
>> # Instantiating module "expiration" from file
>> /etc/raddb/mods-enabled/expiration
>> # Instantiating module "files" from file /etc/raddb/mods-enabled/files
>> reading pairlist file /etc/raddb/mods-config/files/authorize
>> reading pairlist file /etc/raddb/mods-config/files/accounting
>> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
>> # Instantiating module "linelog" from file
>> /etc/raddb/mods-enabled/linelog
>> # Instantiating module "log_accounting" from file
>> /etc/raddb/mods-enabled/linelog
>> # Instantiating module "logintime" from file
>> /etc/raddb/mods-enabled/logintime
>> # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
>> rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
>> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
>> # Instantiating module "etc_passwd" from file
>> /etc/raddb/mods-enabled/passwd
>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>> # Instantiating module "preprocess" from file
>> /etc/raddb/mods-enabled/preprocess
>> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
>> reading pairlist file /etc/raddb/mods-config/preprocess/hints
>> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
>> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
>> # Instantiating module "realmpercent" from file
>> /etc/raddb/mods-enabled/realm
>> # Instantiating module "ntdomain" from file
>> /etc/raddb/mods-enabled/realm
>> # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
>> rlm_sql_mysql: libmysql version: 10.1.37-MariaDB
>> mysql {
>> tls {
>> }
>> warnings = "auto"
>> }
>> rlm_sql (sql): Attempting to connect to database "radius"
>> rlm_sql (sql): Initialising connection pool
>> pool {
>> start = 5
>> min = 3
>> max = 32
>> spare = 10
>> uses = 0
>> lifetime = 0
>> cleanup_interval = 30
>> idle_timeout = 60
>> retry_delay = 30
>> spread = no
>> }
>> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.1.37-MariaDB, protocol version 10
>> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.1.37-MariaDB, protocol version 10
>> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.1.37-MariaDB, protocol version 10
>> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.1.37-MariaDB, protocol version 10
>> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.1.37-MariaDB, protocol version 10
>> rlm_sql (sql): Processing generate_sql_clients
>> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
>> shortname, type, secret, server FROM nas
>> rlm_sql (sql): Reserved connection (0)
>> rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
>> type, secret, server FROM nas
>> rlm_sql (sql): Adding client 10.0.0.38 (domain controller) to global
>> clients list
>> rlm_sql (10.0.0.38): Client "domain controller" (sql) added
>> rlm_sql (sql): Adding client 10.0.0.39 (domain contr-2) to global clients
>> list
>> rlm_sql (10.0.0.39): Client "domain contr-2" (sql) added
>> rlm_sql (sql): Adding client 10.1.172.16 (team2) to global clients list
>> rlm_sql (10.1.172.16): Client "team2" (sql) added
>> rlm_sql (sql): Adding client 10.1.172.18 (team4) to global clients list
>> rlm_sql (10.1.172.18): Client "team4" (sql) added
>> rlm_sql (sql): Adding client 10.1.172.19 (team5) to global clients list
>> rlm_sql (10.1.172.19): Client "team5" (sql) added
>> rlm_sql (sql): Adding client 10.1.172.20 (team6) to global clients list
>> rlm_sql (10.1.172.20): Client "team6" (sql) added
>> rlm_sql (sql): Adding client 10.0.0.1 (Local network) to global clients
>> list
>> rlm_sql (10.0.0.1): Client "Local network" (sql) added
>> rlm_sql (sql): Adding client 192.168.20.1 (ACCT) to global clients list
>> rlm_sql (192.168.20.1): Client "ACCT" (sql) added
>> rlm_sql (sql): Released connection (0)
>> Need 5 more connections to reach 10 spares
>> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.1.37-MariaDB, protocol version 10
>> } # modules
>> radiusd: #### Loading Virtual Servers ####
>> server { # from file /etc/raddb/radiusd.conf
>> } # server
>> server default { # from file /etc/raddb/sites-enabled/default
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> Ignoring "ldap" (see raddb/mods-available/README.rst)
>> # Loading preacct {...}
>> # Loading accounting {...}
>> } # server default
>> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> # Loading session {...}
>> # Loading post-auth {...}
>> } # server inner-tunnel
>> radiusd: #### Opening IP addresses and Ports ####
>> listen {
>> type = "auth"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 0
>> }
>> Failed binding to auth address * port 1812 bound to server default:
>> Address already in use
>> /etc/raddb/sites-enabled/default[60]: Error binding to port for 0.0.0.0
>> port 1812
>>
>> ------------------------------
>>
>> Subject: Digest Footer
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>> ------------------------------
>>
>> End of Freeradius-Users Digest, Vol 165, Issue 69
>> *************************************************
>>
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>
>
More information about the Freeradius-Users
mailing list