Freeradius-Users Digest, Vol 165, Issue 71

Eero Volotinen eero.volotinen at iki.fi
Mon Jan 28 09:10:35 CET 2019


You need to keep line * DEFAULT Auth-Type := PAM active or else it won't
authenticate from pam.*

*Try basic stuff first: configure radius working with pam authentication
("password") and after*
*that try to add google authenticator*


*Eero*



On Mon, Jan 28, 2019 at 10:07 AM Soklang Sum <soklang.sum at cambotech.com>
wrote:

> *Dear Eero Volotinen,*
>
>
>
> *I have command out follow:*
>
>
>
> *# DEFAULT Group == "disabled", Auth-Type := Reject#
> Reply-Message = "Your account has been disabled."# DEFAULT Auth-Type := PAM*
>
>
>
> *And keep the pam enable in the config. For the link that you mention I
> have already did but didn’t work.*
>
> *For debugs my username and password is correct.*
>
>
>
> (2) Received Access-Request Id 30 from 172.26.10.34:57689 to
> 172.24.0.10:1812 length 48
>
> (2)   User-Name = "soklangs"
>
> (2)   User-Password = "soklangs at 123"
>
> (2) # Executing section authorize from file
> /etc/raddb/sites-enabled/default
>
> (2)   authorize {
>
> (2)     policy filter_username {
>
> (2)       if (&User-Name) {
>
> (2)       if (&User-Name)  -> TRUE
>
> (2)       if (&User-Name)  {
>
> (2)         if (&User-Name =~ / /) {
>
> (2)         if (&User-Name =~ / /)  -> FALSE
>
> (2)         if (&User-Name =~ /@[^@]*@/ ) {
>
> (2)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
>
> (2)         if (&User-Name =~ /\.\./ ) {
>
> (2)         if (&User-Name =~ /\.\./ )  -> FALSE
>
> (2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
>
> (2)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
>
> (2)         if (&User-Name =~ /\.$/)  {
>
> (2)         if (&User-Name =~ /\.$/)   -> FALSE
>
> (2)         if (&User-Name =~ /@\./)  {
>
> (2)         if (&User-Name =~ /@\./)   -> FALSE
>
> (2)       } # if (&User-Name)  = notfound
>
> (2)     } # policy filter_username = notfound
>
> (2)     [preprocess] = ok
>
> (2)     [chap] = noop
>
> (2)     [mschap] = noop
>
> (2)     [digest] = noop
>
> (2) suffix: Checking for suffix after "@"
>
> (2) suffix: No '@' in User-Name = "soklangs", looking up realm NULL
>
> (2) suffix: No such realm "NULL"
>
> (2)     [suffix] = noop
>
> (2) eap: No EAP-Message, not doing EAP
>
> (2)     [eap] = noop
>
> (2)     [files] = noop
>
> (2) sql: EXPAND %{User-Name}
>
> (2) sql:    --> soklangs
>
> (2) sql: SQL-User-Name set to 'soklangs'
>
> rlm_sql (sql): Closing connection (0): Hit idle_timeout, was idle for 423
> seconds
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): Closing connection (5): Hit idle_timeout, was idle for 423
> seconds
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): Closing connection (1): Hit idle_timeout, was idle for 417
> seconds
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): Closing connection (6): Hit idle_timeout, was idle for 417
> seconds
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): Closing connection (2): Hit idle_timeout, was idle for 417
> seconds
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): Closing connection (3): Hit idle_timeout, was idle for 380
> seconds
>
> rlm_sql (sql): You probably need to lower "min"
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): Closing connection (7): Hit idle_timeout, was idle for 380
> seconds
>
> rlm_sql (sql): You probably need to lower "min"
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): Closing connection (4): Hit idle_timeout, was idle for 380
> seconds
>
> rlm_sql (sql): You probably need to lower "min"
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): 0 of 0 connections in use.  You  may need to increase
> "spare"
>
> rlm_sql (sql): Opening additional connection (8), 1 of 32 pending slots
> used
>
> rlm_sql_mysql: Starting connect to MySQL server
>
> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
> socket, server version 10.3.11-MariaDB, protocol version 10
>
> rlm_sql (sql): Reserved connection (8)
>
> (2) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
> WHERE username = '%{SQL-User-Name}' ORDER BY id
>
> (2) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
> WHERE username = 'soklangs' ORDER BY id
>
> (2) sql: Executing select query: SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = 'soklangs' ORDER BY id
>
> (2) sql: User found in radcheck table
>
> (2) sql: Conditional check items matched, merging assignment check items
>
> (2) sql:   Cleartext-Password := "soklangs at 123"
>
> (2) sql:   Cisco-AVPair := "shell:priv-lvl=15"
>
> (2) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
> WHERE username = '%{SQL-User-Name}' ORDER BY id
>
> (2) sql:    --> SELECT id, username, attribute, value, op FROM radreply
> WHERE username = 'soklangs' ORDER BY id
>
> (2) sql: Executing select query: SELECT id, username, attribute, value, op
> FROM radreply WHERE username = 'soklangs' ORDER BY id
>
> (2) sql: User found in radreply table, merging reply items
>
> (2) sql:   Huawei-Exec-Privilege := 15
>
> (2) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
> '%{SQL-User-Name}' ORDER BY priority
>
> (2) sql:    --> SELECT groupname FROM radusergroup WHERE username =
> 'soklangs' ORDER BY priority
>
> (2) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
> username = 'soklangs' ORDER BY priority
>
> (2) sql: User not found in any groups
>
> rlm_sql (sql): Released connection (8)
>
> Need 2 more connections to reach min connections (3)
>
> rlm_sql (sql): Opening additional connection (9), 1 of 31 pending slots
> used
>
> rlm_sql_mysql: Starting connect to MySQL server
>
> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
> socket, server version 10.3.11-MariaDB, protocol version 10
>
> (2)     [sql] = ok
>
> (2)     [expiration] = noop
>
> (2)     [logintime] = noop
>
> (2)     [pap] = updated
>
> (2)   } # authorize = updated
>
> (2) Found Auth-Type = PAP
>
> (2) # Executing group from file /etc/raddb/sites-enabled/default
>
> (2)   Auth-Type PAP {
>
> (2) pap: Login attempt with password
>
> (2) pap: Comparing with "known good" Cleartext-Password
>
> (2) pap: User authenticated successfully
>
> (2)     [pap] = ok
>
> (2)   } # Auth-Type PAP = ok
>
> (2) # Executing section post-auth from file
> /etc/raddb/sites-enabled/default
>
> (2)   post-auth {
>
> (2)     update {
>
> (2)       No attributes updated
>
> (2)     } # update = noop
>
> (2) sql: EXPAND .query
>
> (2) sql:    --> .query
>
> (2) sql: Using query template 'query'
>
> rlm_sql (sql): Reserved connection (8)
>
> (2) sql: EXPAND %{User-Name}
>
> (2) sql:    --> soklangs
>
> (2) sql: SQL-User-Name set to 'soklangs'
>
> (2) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S')
>
> (2) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( 'soklangs', 'soklangs at 123', 'Access-Accept', '2019-01-28
> 15:05:33.972795')
>
> (2) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
> authdate) VALUES ( 'soklangs', 'soklangs at 123', 'Access-Accept',
> '2019-01-28 15:05:33.972795')
>
> (2) sql: SQL query returned: success
>
> (2) sql: 1 record(s) updated
>
> rlm_sql (sql): Released connection (8)
>
> (2)     [sql] = ok
>
> (2)     [exec] = noop
>
> (2)     policy remove_reply_message_if_eap {
>
> (2)       if (&reply:EAP-Message && &reply:Reply-Message) {
>
> (2)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
>
> (2)       else {
>
> (2)         [noop] = noop
>
> (2)       } # else = noop
>
> (2)     } # policy remove_reply_message_if_eap = noop
>
> (2)   } # post-auth = ok
>
> (2) Login OK: [soklangs/soklangs at 123] (from client WIFI_NET1E port 0)
>
> (2) Sent Access-Accept Id 30 from 172.24.0.10:1812 to 172.26.10.34:57689
> length 0
>
> (2)   Huawei-Exec-Privilege = 15
>
> (2) Finished request
>
> Waking up in 4.9 seconds.
>
>
>
> *And then I try with google authentication code is :*
>
>
>
> (2) Cleaning up request packet ID 30 with timestamp +423
>
> Ready to process requests
>
> (3) Received Access-Request Id 31 from 172.26.10.34:49579 to
> 172.24.0.10:1812 length 64
>
> (3)   User-Name = "soklangs"
>
> (3)   User-Password = "soklangs at 123021281"
>
> (3) # Executing section authorize from file
> /etc/raddb/sites-enabled/default
>
> (3)   authorize {
>
> (3)     policy filter_username {
>
> (3)       if (&User-Name) {
>
> (3)       if (&User-Name)  -> TRUE
>
> (3)       if (&User-Name)  {
>
> (3)         if (&User-Name =~ / /) {
>
> (3)         if (&User-Name =~ / /)  -> FALSE
>
> (3)         if (&User-Name =~ /@[^@]*@/ ) {
>
> (3)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
>
> (3)         if (&User-Name =~ /\.\./ ) {
>
> (3)         if (&User-Name =~ /\.\./ )  -> FALSE
>
> (3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
>
> (3)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
>
> (3)         if (&User-Name =~ /\.$/)  {
>
> (3)         if (&User-Name =~ /\.$/)   -> FALSE
>
> (3)         if (&User-Name =~ /@\./)  {
>
> (3)         if (&User-Name =~ /@\./)   -> FALSE
>
> (3)       } # if (&User-Name)  = notfound
>
> (3)     } # policy filter_username = notfound
>
> (3)     [preprocess] = ok
>
> (3)     [chap] = noop
>
> (3)     [mschap] = noop
>
> (3)     [digest] = noop
>
> (3) suffix: Checking for suffix after "@"
>
> (3) suffix: No '@' in User-Name = "soklangs", looking up realm NULL
>
> (3) suffix: No such realm "NULL"
>
> (3)     [suffix] = noop
>
> (3) eap: No EAP-Message, not doing EAP
>
> (3)     [eap] = noop
>
> (3)     [files] = noop
>
> (3) sql: EXPAND %{User-Name}
>
> (3) sql:    --> soklangs
>
> (3) sql: SQL-User-Name set to 'soklangs'
>
> rlm_sql (sql): Closing connection (9): Hit idle_timeout, was idle for 97
> seconds
>
> rlm_sql (sql): You probably need to lower "min"
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): Closing connection (8): Hit idle_timeout, was idle for 97
> seconds
>
> rlm_sql (sql): You probably need to lower "min"
>
> rlm_sql_mysql: Socket destructor called, closing socket
>
> rlm_sql (sql): 0 of 0 connections in use.  You  may need to increase
> "spare"
>
> rlm_sql (sql): Opening additional connection (10), 1 of 32 pending slots
> used
>
> rlm_sql_mysql: Starting connect to MySQL server
>
> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
> socket, server version 10.3.11-MariaDB, protocol version 10
>
> rlm_sql (sql): Reserved connection (10)
>
> (3) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
> WHERE username = '%{SQL-User-Name}' ORDER BY id
>
> (3) sql:    --> SELECT id, username, attribute, value, op FROM radcheck
> WHERE username = 'soklangs' ORDER BY id
>
> (3) sql: Executing select query: SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = 'soklangs' ORDER BY id
>
> (3) sql: User found in radcheck table
>
> (3) sql: Conditional check items matched, merging assignment check items
>
> (3) sql:   Cleartext-Password := "soklangs at 123"
>
> (3) sql:   Cisco-AVPair := "shell:priv-lvl=15"
>
> (3) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
> WHERE username = '%{SQL-User-Name}' ORDER BY id
>
> (3) sql:    --> SELECT id, username, attribute, value, op FROM radreply
> WHERE username = 'soklangs' ORDER BY id
>
> (3) sql: Executing select query: SELECT id, username, attribute, value, op
> FROM radreply WHERE username = 'soklangs' ORDER BY id
>
> (3) sql: User found in radreply table, merging reply items
>
> (3) sql:   Huawei-Exec-Privilege := 15
>
> (3) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
> '%{SQL-User-Name}' ORDER BY priority
>
> (3) sql:    --> SELECT groupname FROM radusergroup WHERE username =
> 'soklangs' ORDER BY priority
>
> (3) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
> username = 'soklangs' ORDER BY priority
>
> (3) sql: User not found in any groups
>
> rlm_sql (sql): Released connection (10)
>
> Need 2 more connections to reach min connections (3)
>
> rlm_sql (sql): Opening additional connection (11), 1 of 31 pending slots
> used
>
> rlm_sql_mysql: Starting connect to MySQL server
>
> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
> socket, server version 10.3.11-MariaDB, protocol version 10
>
> (3)     [sql] = ok
>
> (3)     [expiration] = noop
>
> (3)     [logintime] = noop
>
> (3)     [pap] = updated
>
> (3)   } # authorize = updated
>
> (3) Found Auth-Type = PAP
>
> (3) # Executing group from file /etc/raddb/sites-enabled/default
>
> (3)   Auth-Type PAP {
>
> (3) pap: Login attempt with password
>
> (3) pap: Comparing with "known good" Cleartext-Password
>
> (3) pap: ERROR: Cleartext password "soklangs at 123021281" does not match
> "known good" password
>
> (3) pap: Passwords don't match
>
> (3)     [pap] = reject
>
> (3)   } # Auth-Type PAP = reject
>
> (3) Failed to authenticate the user
>
> (3) Login incorrect (pap: Cleartext password "soklangs at 123021281" does
> not match "known good" password): [soklangs/soklangs at 123021281] (from
> client WIFI_NET1E port 0)
>
> (3) Using Post-Auth-Type Reject
>
> (3) # Executing group from file /etc/raddb/sites-enabled/default
>
> (3)   Post-Auth-Type REJECT {
>
> (3) sql: EXPAND .query
>
> (3) sql:    --> .query
>
> (3) sql: Using query template 'query'
>
> rlm_sql (sql): Reserved connection (10)
>
> (3) sql: EXPAND %{User-Name}
>
> (3) sql:    --> soklangs
>
> (3) sql: SQL-User-Name set to 'soklangs'
>
> (3) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S')
>
> (3) sql:    --> INSERT INTO radpostauth (username, pass, reply, authdate)
> VALUES ( 'soklangs', 'soklangs at 123021281', 'Access-Reject', '2019-01-28
> 15:07:10.600741')
>
> (3) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
> authdate) VALUES ( 'soklangs', 'soklangs at 123021281', 'Access-Reject',
> '2019-01-28 15:07:10.600741')
>
> (3) sql: SQL query returned: success
>
> (3) sql: 1 record(s) updated
>
> rlm_sql (sql): Released connection (10)
>
> (3)     [sql] = ok
>
> (3) attr_filter.access_reject: EXPAND %{User-Name}
>
> (3) attr_filter.access_reject:    --> soklangs
>
> (3) attr_filter.access_reject: Matched entry DEFAULT at line 11
>
> (3)     [attr_filter.access_reject] = updated
>
> (3)     [eap] = noop
>
> (3)     policy remove_reply_message_if_eap {
>
> (3)       if (&reply:EAP-Message && &reply:Reply-Message) {
>
> (3)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
>
> (3)       else {
>
> (3)         [noop] = noop
>
> (3)       } # else = noop
>
> (3)     } # policy remove_reply_message_if_eap = noop
>
> (3)   } # Post-Auth-Type REJECT = updated
>
> (3) Delaying response for 1.000000 seconds
>
> Waking up in 0.3 seconds.
>
> Waking up in 0.6 seconds.
>
> (3) Sending delayed response
>
> (3) Sent Access-Reject Id 31 from 172.24.0.10:1812 to 172.26.10.34:49579
> length 20
>
> Waking up in 3.9 seconds.
>
> (3) Cleaning up request packet ID 31 with timestamp +520
>
> Ready to process requests
>
>
>
>
>
> *From:* Eero Volotinen <eero.volotinen at iki.fi>
> *Sent:* Monday, January 28, 2019 2:49 PM
> *To:* FreeRadius users mailing list <freeradius-users at lists.freeradius.org>;
> soklang.sum at cambotech.com
> *Subject:* Re: Freeradius-Users Digest, Vol 165, Issue 71
>
>
>
> Well. try removing this:
>
>
>
> try removing this line
>
>
>
> DEFAULT Group == "disabled", Auth-Type := Reject
>                 Reply-Message = "Your account has been disabled."
>
>
>
> and keep that pam line in config file..
>
>
>
> Check that user password is correct and add some more debug to pam_google
> authenticator line like adding debug *) switch to it and then check out pam
> logging..
>
>
>
>
> https://github.com/google/google-authenticator-libpam/blob/master/man/pam_google_authenticator.8.md
>
>
>
> Eero
>
>
>
> On Mon, Jan 28, 2019 at 9:37 AM Soklang Sum <soklang.sum at cambotech.com>
> wrote:
>
> Dear Eero Volotinen,
>
> Can you give me more details the guide its work or link preference how to
> do it?
>
> My problem in this step:
>
> # vi /etc/raddb/users
> DEFAULT Group == "disabled", Auth-Type := Reject
>                 Reply-Message = "Your account has been disabled."
> DEFAULT Auth-Type := PAM
>
> When I enable the step as mention above, it always rejected.
>
> This is RADIUS Debugs in my attachment file.
>
>
>
> -----Original Message-----
> From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> cambotech.com at lists.freeradius.org> On Behalf Of
> freeradius-users-request at lists.freeradius.org
> Sent: Monday, January 28, 2019 2:13 PM
> To: freeradius-users at lists.freeradius.org
> Subject: Freeradius-Users Digest, Vol 165, Issue 71
>
> Send Freeradius-Users mailing list submissions to
>         freeradius-users at lists.freeradius.org
>
> To subscribe or unsubscribe via the World Wide Web, visit
>         http://lists.freeradius.org/mailman/listinfo/freeradius-users
> or, via email, send a message with subject or body 'help' to
>         freeradius-users-request at lists.freeradius.org
>
> You can reach the person managing the list at
>         freeradius-users-owner at lists.freeradius.org
>
> When replying, please edit your Subject line so it is more specific than
> "Re: Contents of Freeradius-Users digest..."
>
>
> Today's Topics:
>
>    1. Re: Contents of Freeradius-Users digest...Google
>       Authenticator (Eero Volotinen)
>
>
> ----------------------------------------------------------------------
>
> Message: 1
> Date: Mon, 28 Jan 2019 09:12:17 +0200
> From: Eero Volotinen <eero.volotinen at iki.fi>
> To: FreeRadius users mailing list
>         <freeradius-users at lists.freeradius.org>, soklang.sum at cambotech.com
> Subject: Re: Contents of Freeradius-Users digest...Google
>         Authenticator
> Message-ID:
>         <CABzZrXdo9ExvdiNDjo5485NKnjp=
> QfaZfwhU+GdMVO7V9i592g at mail.gmail.com>
> Content-Type: text/plain; charset="UTF-8"
>
> works fine. remember to run freeradius as root or else it cannot access
> google authenticator files
>
> Eero
>
> On Mon, Jan 28, 2019, 09:09 Soklang Sum <soklang.sum at cambotech.com wrote:
>
> > Dear Team Freeradius,
> >
> > I would like to ask about FreeRADIUS work with google authenticator
> > (2FA) or not?
> > I have tried to install freeRADIUS with google authenticator but it
> > doesn't work, when I try install following the guideline any website
> > like https://networkjutsu.com/freeradius-google-authenticator/ it
> > always rejected.
> >
> > So that why I want to make sure from team expertise freeRADIUS it work
> > with google authenticator or not?
> >
> > But I saw in the guideline it works but for me never work.
> >
> > Please help feedback soon as possible.
> >
> > Thanks
> >
> > -----Original Message-----
> > From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> > cambotech.com at lists.freeradius.org> On Behalf Of
> > freeradius-users-request at lists.freeradius.org
> > Sent: Monday, January 28, 2019 11:42 AM
> > To: freeradius-users at lists.freeradius.org
> > Subject: Freeradius-Users Digest, Vol 165, Issue 69
> >
> > Send Freeradius-Users mailing list submissions to
> >         freeradius-users at lists.freeradius.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >         http://lists.freeradius.org/mailman/listinfo/freeradius-users
> > or, via email, send a message with subject or body 'help' to
> >         freeradius-users-request at lists.freeradius.org
> >
> > You can reach the person managing the list at
> >         freeradius-users-owner at lists.freeradius.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than
> > "Re: Contents of Freeradius-Users digest..."
> >
> >
> > Today's Topics:
> >
> >    1. EAP-GTC w/ "PAP-like" LDAP authentication (Ian Pilcher)
> >    2. Re: EAP-GTC w/ "PAP-like" LDAP authentication (Alan DeKok)
> >    3. Multiple UserDN for different LDAPs (diego.barzon at tiscali.it)
> >    4. Freeradius-Users Digest, Vol 165, Issue 68 (Soklang Sum)
> >    5. radius accounting issue. (slnarayanan at nitt.edu)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Sun, 27 Jan 2019 11:43:12 -0600
> > From: Ian Pilcher <arequipeno at gmail.com>
> > To: freeradius-users at lists.freeradius.org
> > Subject: EAP-GTC w/ "PAP-like" LDAP authentication
> > Message-ID: <q2kqjg$4fa3$1 at blaine.gmane.org>
> > Content-Type: text/plain; charset=utf-8; format=flowed
> >
> > I am struggling to find documentation of how to set up $SUBJECT.
> >
> > I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC
> > using a file-based test user, but the number of different protocols
> > and configurations supported and documented in the config files means
> > that I haven't been able to figure out how to achieve what I want.
> >
> > Any hints, links, etc. would be appreciated.
> >
> > Thanks!
> >
> > --
> > ========================================================================
> > Ian Pilcher                                         arequipeno at gmail.com
> > -------- "I grew up before Mark Zuckerberg invented friendship"
> > --------
> > ======================================================================
> > ==
> >
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Sun, 27 Jan 2019 14:17:58 -0500
> > From: Alan DeKok <aland at deployingradius.com>
> > To: FreeRadius users mailing list
> >         <freeradius-users at lists.freeradius.org>
> > Subject: Re: EAP-GTC w/ "PAP-like" LDAP authentication
> > Message-ID: <165EB1A7-2D19-4AAD-BD48-719D157BC5C5 at deployingradius.com>
> > Content-Type: text/plain;       charset=us-ascii
> >
> > On Jan 27, 2019, at 12:43 PM, Ian Pilcher <arequipeno at gmail.com> wrote:
> > >
> > > I am struggling to find documentation of how to set up $SUBJECT.
> > >
> > > I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC
> > > using a file-based test user, but the number of different protocols
> > > and configurations supported and documented in the config files
> > > means that I haven't been able to figure out how to achieve what I
> want.
> >
> >   (a) Make sure PEAP works with certificates.
> >
> >   (b) configure and enable LDAP.  See mods-available/ldap
> >
> >   Once the LDAP module is available, the server will automatically use
> it.
> >
> >   And, the server will automatically grab passwords from LDAP.  And,
> > the server will automatically use those passwords to do EAP-GTC.
> >
> >   It really is that easy.  The key thing is to *let the server do the
> > work*.  Don't try to "force" a particular kind of authentication.  EAP
> > doesn't work that way.
> >
> >   If you're using Active Directory, it's harder.  Because Active
> > Directory isn't a real LDAP server.
> >
> >   It also helps to describe what you've done, what happened, and why
> > you think it's wrong.  Otherwise, we're limited to:
> >
> > Q: I tried stuff and it doesn't work.  What do I do?
> > A: Try different stuff
> >
> >   Which isn't helpful to anyone.  Better questions means better answers.
> >
> >   Alan DeKok.
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 3
> > Date: Mon, 28 Jan 2019 00:27:28 +0100
> > From: diego.barzon at tiscali.it
> > To: <freeradius-users at lists.freeradius.org>
> > Subject: Multiple UserDN for different LDAPs
> > Message-ID: <a5fefc494d4f1514bf2d35eb706b2edb at tiscali.it>
> > Content-Type: text/plain; charset=UTF-8
> >
> >
> >
> > Hi all,
> >  here's the problem.
> > I need to authenticate against 2
> > different LDAP servers, populated with different data. I don't need
> > specific information (like group memberships or so): trying to bind
> > with the credentials is enough.
> > In 'authorize' I set Auth to LDAP and in authenticate I put something
> > like this:
> > ldap1{
> >  fail = 1
> >  invalid = 2
> >
> > reject = 3
> > }
> > if (!ok) {
> >  ldap2
> > }
> > ldap1 and ldap2 configurations are on
> > separate files, they are different in everything: the former's a DC,
> > the latter an openldap server. Moreover they have different BaseDN.
> > It
> > looks like freeradius set UserDN for the first ldap and tries to use
> > the same on the second. I think I need two different values for
> > LDAP-UserDN, which is not possible, but I read there's some kind of
> > workaround involving writing on files/authorize but honestly I didn't
> > understand what I'm supposed to do.
> > Thanks in advance!
> >
> >
> >
> > Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per
> > sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY!
> > http://tisca.li/myopen
> >
> >
> >
> > ------------------------------
> >
> > Message: 4
> > Date: Mon, 28 Jan 2019 11:14:50 +0700
> > From: "Soklang Sum" <soklang.sum at cambotech.com>
> > To: <freeradius-users at lists.freeradius.org>
> > Subject: Freeradius-Users Digest, Vol 165, Issue 68
> > Message-ID: <000201d4b6c0$05465b20$0fd31160$@cambotech.com>
> > Content-Type: text/plain;       charset="utf-8"
> >
> > Dear Team Freeradius,
> >
> > I would like to ask about FreeRADIUS work with google authenticator
> > (2FA) or not?
> > I have tried to install freeRADIUS with google authenticator but it
> > doesn't work, when I try install following the guideline any website
> > like https://networkjutsu.com/freeradius-google-authenticator/ it
> > always rejected.
> >
> > So that why I want to make sure from team expertise freeRADIUS it work
> > with google authenticator or not?
> >
> > But I saw in the guideline it works but for me never work.
> >
> > Please help feedback soon as possible.
> >
> > Thanks
> >
> > ===================
> >
> > -----Original Message-----
> > From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
> > cambotech.com at lists.freeradius.org> On Behalf Of
> > freeradius-users-request at lists.freeradius.org
> > Sent: Sunday, January 27, 2019 6:00 PM
> > To: freeradius-users at lists.freeradius.org
> > Subject: Freeradius-Users Digest, Vol 165, Issue 68
> >
> > Send Freeradius-Users mailing list submissions to
> >         freeradius-users at lists.freeradius.org
> >
> > To subscribe or unsubscribe via the World Wide Web, visit
> >         http://lists.freeradius.org/mailman/listinfo/freeradius-users
> > or, via email, send a message with subject or body 'help' to
> >         freeradius-users-request at lists.freeradius.org
> >
> > You can reach the person managing the list at
> >         freeradius-users-owner at lists.freeradius.org
> >
> > When replying, please edit your Subject line so it is more specific
> > than
> > "Re: Contents of Freeradius-Users digest..."
> >
> >
> > Today's Topics:
> >
> >    1. Session start times issues (Philemon Jaomalaza)
> >    2. Re: Session start times issues (Alan DeKok)
> >
> >
> > ----------------------------------------------------------------------
> >
> > Message: 1
> > Date: Sat, 26 Jan 2019 16:43:23 +0300
> > From: "Philemon Jaomalaza" <philemon.jaomalaza at gmail.com>
> > To: "'FreeRadius users mailing list'"
> >         <freeradius-users at lists.freeradius.org>
> > Subject: Session start times issues
> > Message-ID: <031301d4b57d$1e29c3a0$5a7d4ae0$@gmail.com>
> > Content-Type: text/plain;       charset="utf-8"
> >
> > Hello,
> > If the nas has a wrong date and time, the sqlcounter does not work
> > correctly.
> >
> > The attribute Event-Timestamp got the wrong data and time from nas.
> >
> > I found this features in preacct substitution:
> >
> >         update request {
> >                 &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
> > %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
> >         }
> >
> > I uncomente it but nothing change.
> >
> > Where is the best way to have the good local time of radius server on
> > "acctstarttime" column of "radacct" on sql database ?
> >
> > JMLZ
> >
> >
> >
> > ---
> > L'absence de virus dans ce courrier électronique a été vérifiée par le
> > logiciel antivirus Avast.
> > https://www.avast.com/antivirus
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 2
> > Date: Sat, 26 Jan 2019 14:35:02 -0500
> > From: Alan DeKok <aland at deployingradius.com>
> > To: FreeRadius users mailing list
> >         <freeradius-users at lists.freeradius.org>
> > Subject: Re: Session start times issues
> > Message-ID: <717983BF-2594-4316-807F-0726F706BD53 at deployingradius.com>
> > Content-Type: text/plain;       charset=us-ascii
> >
> > On Jan 26, 2019, at 8:43 AM, Philemon Jaomalaza <
> > philemon.jaomalaza at gmail.com> wrote:
> > > If the nas has a wrong date and time, the sqlcounter does not work
> > correctly.
> >
> >   If I take the tires off of my car, it doesn't drive well.
> >
> >   Solution: fix the REAL problem.
> >
> > > The attribute Event-Timestamp got the wrong data and time from nas.
> >
> >   Fix the NAS.  Anything else is an ugly hack.
> >
> > > I found this features in preacct substitution:
> > >
> > >        update request {
> > >                &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
> > %{%{Acct-Session-Time}:-0} - %{%{Acct-D$
> > >        }
> > >
> > > I uncomente it but nothing change.
> > >
> > > Where is the best way to have the good local time of radius server
> > > on
> > "acctstarttime" column of "radacct" on sql database ?
> >
> >   Fix the NAS.
> >
> >   Alan DeKok.
> >
> >
> >
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> > ------------------------------
> >
> > End of Freeradius-Users Digest, Vol 165, Issue 68
> > *************************************************
> >
> >
> >
> >
> > ------------------------------
> >
> > Message: 5
> > Date: Mon, 28 Jan 2019 10:05:15 +0530
> > From: slnarayanan at nitt.edu
> > To: FreeRadius users mailing list
> >         <freeradius-users at lists.freeradius.org>
> > Subject: radius accounting issue.
> > Message-ID:
> >
> > <20190128100515.Horde.b8e9HpA3uLd-EHwBhBcx3A6 at webmail.nitt.edu>
> > Content-Type: text/plain; charset="utf-8"; Format="flowed";
> >         DelSp="Yes"
> >
> >
> > Dear All,
> >
> >        I have a problem with accounting .Everything is working fine on
> > freeradius.Login& authentication sql everything is working fine.But i
> > have a problem in accounting pocket.We are using sonciwall firwall in
> > our campus.Those who logged through our radius server the login
> > information (Radius Accounting) information need to display on
> > sonicwall user's page.The UDP pocket 1813 not send to our firewall
> > ip.In the firewall i have enable policy allow to all our local
> > network.I have attached my radiususd -X log to this mail.Kindly
> > provide the solution for resolve my issue.The Radius Accounting
> > information now shows on radacct in the phpmyadmin.
> >
> > Regards.
> > S.Lakshmi narayanan
> >
> > -------------- next part -------------- FreeRADIUS Version 3.0.13
> > Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the
> > terms of the GNU General Public License For more information about
> > these matters, see the file named COPYRIGHT Starting - reading
> > configuration files ...
> > including dictionary file /usr/share/freeradius/dictionary including
> > dictionary file /usr/share/freeradius/dictionary.dhcp
> > including dictionary file /usr/share/freeradius/dictionary.vqp
> > including dictionary file /etc/raddb/dictionary including
> > configuration file /etc/raddb/radiusd.conf including configuration
> > file /etc/raddb/proxy.conf including configuration file
> > /etc/raddb/clients.conf including files in directory
> > /etc/raddb/mods-enabled/ including configuration file
> > /etc/raddb/mods-enabled/always including configuration file
> > /etc/raddb/mods-enabled/attr_filter
> > including configuration file /etc/raddb/mods-enabled/cache_eap
> > including configuration file /etc/raddb/mods-enabled/chap including
> > configuration file /etc/raddb/mods-enabled/date including
> > configuration file /etc/raddb/mods-enabled/detail including
> > configuration file /etc/raddb/mods-enabled/detail.log
> > including configuration file /etc/raddb/mods-enabled/dhcp including
> > configuration file /etc/raddb/mods-enabled/digest including
> > configuration file /etc/raddb/mods-enabled/dynamic_clients
> > including configuration file /etc/raddb/mods-enabled/eap including
> > configuration file /etc/raddb/mods-enabled/echo including
> > configuration file /etc/raddb/mods-enabled/exec including
> > configuration file /etc/raddb/mods-enabled/expiration
> > including configuration file /etc/raddb/mods-enabled/expr including
> > configuration file /etc/raddb/mods-enabled/files including
> > configuration file /etc/raddb/mods-enabled/linelog including
> > configuration file /etc/raddb/mods-enabled/logintime including
> > configuration file /etc/raddb/mods-enabled/mschap including
> > configuration file /etc/raddb/mods-enabled/ntlm_auth including
> > configuration file /etc/raddb/mods-enabled/pap including configuration
> > file /etc/raddb/mods-enabled/passwd including configuration file
> > /etc/raddb/mods-enabled/preprocess
> > including configuration file /etc/raddb/mods-enabled/radutmp including
> > configuration file /etc/raddb/mods-enabled/realm including
> > configuration file /etc/raddb/mods-enabled/replicate including
> > configuration file /etc/raddb/mods-enabled/soh including configuration
> > file /etc/raddb/mods-enabled/sradutmp including configuration file
> > /etc/raddb/mods-enabled/unix including configuration file
> > /etc/raddb/mods-enabled/unpack including configuration file
> > /etc/raddb/mods-enabled/utf8 including configuration file
> > /etc/raddb/mods-enabled/sql including configuration file
> > /etc/raddb/mods-config/sql/main/mysql/queries.conf
> > including files in directory /etc/raddb/policy.d/ including
> > configuration file /etc/raddb/policy.d/accounting including
> > configuration file /etc/raddb/policy.d/canonicalization
> > including configuration file /etc/raddb/policy.d/control including
> > configuration file /etc/raddb/policy.d/cui including configuration
> > file /etc/raddb/policy.d/debug including configuration file
> > /etc/raddb/policy.d/dhcp including configuration file
> > /etc/raddb/policy.d/eap including configuration file
> > /etc/raddb/policy.d/filter including configuration file
> > /etc/raddb/policy.d/operator-name including files in directory
> > /etc/raddb/sites-enabled/ including configuration file
> > /etc/raddb/sites-enabled/default including configuration file
> > /etc/raddb/sites-enabled/inner-tunnel
> > main {
> >  security {
> >         user = "radiusd"
> >         group = "radiusd"
> >         allow_core_dumps = no
> >  }
> >         name = "radiusd"
> >         prefix = "/usr"
> >         localstatedir = "/var"
> >         logdir = "/var/log/radius"
> >         run_dir = "/var/run/radiusd"
> > }
> > main {
> >         name = "radiusd"
> >         prefix = "/usr"
> >         localstatedir = "/var"
> >         sbindir = "/usr/sbin"
> >         logdir = "/var/log/radius"
> >         run_dir = "/var/run/radiusd"
> >         libdir = "/usr/lib64/freeradius"
> >         radacctdir = "/var/log/radius/radacct"
> >         hostname_lookups = no
> >         max_request_time = 30
> >         cleanup_delay = 5
> >         max_requests = 16384
> >         pidfile = "/var/run/radiusd/radiusd.pid"
> >         checkrad = "/usr/sbin/checkrad"
> >         debug_level = 0
> >         proxy_requests = no
> >  log {
> >         stripped_names = yes
> >         auth = yes
> >         auth_badpass = yes
> >         auth_goodpass = yes
> >         colourise = yes
> >         msg_denied = "You are already logged in - access denied"
> >  }
> >  resources {
> >  }
> >  security {
> >         max_attributes = 200
> >         reject_delay = 1.000000
> >         status_server = yes
> >  }
> > }
> > radiusd: #### Loading Realms and Home Servers ####  proxy server {
> >         retry_delay = 5
> >         retry_count = 3
> >         default_fallback = no
> >         dead_time = 120
> >         wake_all_if_all_dead = no
> >  }
> >  home_server localhost {
> >         ipaddr = 127.0.0.1
> >         port = 1812
> >         type = "auth"
> >         secret = <<< secret >>>
> >         response_window = 20.000000
> >         response_timeouts = 1
> >         max_outstanding = 65536
> >         zombie_period = 40
> >         status_check = "status-server"
> >         ping_interval = 30
> >         check_interval = 30
> >         check_timeout = 4
> >         num_answers_to_alive = 3
> >         revive_interval = 120
> >   limit {
> >         max_connections = 16
> >         max_requests = 0
> >         lifetime = 0
> >         idle_timeout = 0
> >   }
> >   coa {
> >         irt = 2
> >         mrt = 16
> >         mrc = 5
> >         mrd = 30
> >   }
> >  }
> >  home_server_pool my_auth_failover {
> >         type = fail-over
> >         home_server = localhost
> >  }
> >  realm example.com {
> >         auth_pool = my_auth_failover
> >  }
> >  realm LOCAL {
> >  }
> >  realm int {
> >         virtual_server = inner-tunnel
> >  }
> > radiusd: #### Loading Clients ####
> >  client localhost {
> >         ipv4addr = *
> >         require_message_authenticator = no
> >         secret = <<< secret >>>
> >         nas_type = "other"
> >         proto = "udp"
> >   limit {
> >         max_connections = 16
> >         lifetime = 0
> >         idle_timeout = 0
> >   }
> >  }
> > Debugger not attached
> >  # Creating Auth-Type = mschap
> >  # Creating Auth-Type = eap
> >  # Creating Auth-Type = NTLMAuth
> >  # Creating Auth-Type = MS-CHAP
> >  # Creating Autz-Type = Status-Server
> >  # Creating Acct-Type = Status-Server
> >  # Creating Auth-Type = NTLM_AUTH
> > radiusd: #### Instantiating modules ####  modules {
> >   # Loaded module rlm_always
> >   # Loading module "reject" from file /etc/raddb/mods-enabled/always
> >   always reject {
> >         rcode = "reject"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loading module "fail" from file /etc/raddb/mods-enabled/always
> >   always fail {
> >         rcode = "fail"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loading module "ok" from file /etc/raddb/mods-enabled/always
> >   always ok {
> >         rcode = "ok"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loading module "handled" from file /etc/raddb/mods-enabled/always
> >   always handled {
> >         rcode = "handled"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loading module "invalid" from file /etc/raddb/mods-enabled/always
> >   always invalid {
> >         rcode = "invalid"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loading module "userlock" from file /etc/raddb/mods-enabled/always
> >   always userlock {
> >         rcode = "userlock"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loading module "notfound" from file /etc/raddb/mods-enabled/always
> >   always notfound {
> >         rcode = "notfound"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loading module "noop" from file /etc/raddb/mods-enabled/always
> >   always noop {
> >         rcode = "noop"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loading module "updated" from file /etc/raddb/mods-enabled/always
> >   always updated {
> >         rcode = "updated"
> >         simulcount = 0
> >         mpp = no
> >   }
> >   # Loaded module rlm_attr_filter
> >   # Loading module "attr_filter.post-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> >   attr_filter attr_filter.post-proxy {
> >         filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
> >         key = "%{Realm}"
> >         relaxed = no
> >   }
> >   # Loading module "attr_filter.pre-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> >   attr_filter attr_filter.pre-proxy {
> >         filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
> >         key = "%{Realm}"
> >         relaxed = no
> >   }
> >   # Loading module "attr_filter.access_reject" from file
> > /etc/raddb/mods-enabled/attr_filter
> >   attr_filter attr_filter.access_reject {
> >         filename = "/etc/raddb/mods-config/attr_filter/access_reject"
> >         key = "%{User-Name}"
> >         relaxed = no
> >   }
> >   # Loading module "attr_filter.access_challenge" from file
> > /etc/raddb/mods-enabled/attr_filter
> >   attr_filter attr_filter.access_challenge {
> >         filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
> >         key = "%{User-Name}"
> >         relaxed = no
> >   }
> >   # Loading module "attr_filter.accounting_response" from file
> > /etc/raddb/mods-enabled/attr_filter
> >   attr_filter attr_filter.accounting_response {
> >         filename =
> "/etc/raddb/mods-config/attr_filter/accounting_response"
> >         key = "%{User-Name}"
> >         relaxed = no
> >   }
> >   # Loaded module rlm_cache
> >   # Loading module "cache_eap" from file
> /etc/raddb/mods-enabled/cache_eap
> >   cache cache_eap {
> >         driver = "rlm_cache_rbtree"
> >         key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> >         ttl = 15
> >         max_entries = 0
> >         epoch = 0
> >         add_stats = no
> >   }
> >   # Loaded module rlm_chap
> >   # Loading module "chap" from file /etc/raddb/mods-enabled/chap
> >   # Loaded module rlm_date
> >   # Loading module "date" from file /etc/raddb/mods-enabled/date
> >   date {
> >         format = "%b %e %Y %H:%M:%S %Z"
> >   }
> >   # Loaded module rlm_detail
> >   # Loading module "detail" from file /etc/raddb/mods-enabled/detail
> >   detail {
> >         filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> >         header = "%t"
> >         permissions = 384
> >         locking = no
> >         escape_filenames = no
> >         log_packet_header = no
> >   }
> >   # Loading module "auth_log" from file
> /etc/raddb/mods-enabled/detail.log
> >   detail auth_log {
> >         filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> >         header = "%t"
> >         permissions = 384
> >         locking = no
> >         escape_filenames = no
> >         log_packet_header = no
> >   }
> >   # Loading module "reply_log" from file
> /etc/raddb/mods-enabled/detail.log
> >   detail reply_log {
> >         filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> >         header = "%t"
> >         permissions = 384
> >         locking = no
> >         escape_filenames = no
> >         log_packet_header = no
> >   }
> >   # Loading module "pre_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> >   detail pre_proxy_log {
> >         filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> >         header = "%t"
> >         permissions = 384
> >         locking = no
> >         escape_filenames = no
> >         log_packet_header = no
> >   }
> >   # Loading module "post_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> >   detail post_proxy_log {
> >         filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> >         header = "%t"
> >         permissions = 384
> >         locking = no
> >         escape_filenames = no
> >         log_packet_header = no
> >   }
> >   # Loaded module rlm_dhcp
> >   # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
> >   # Loaded module rlm_digest
> >   # Loading module "digest" from file /etc/raddb/mods-enabled/digest
> >   # Loaded module rlm_dynamic_clients
> >   # Loading module "dynamic_clients" from file
> > /etc/raddb/mods-enabled/dynamic_clients
> >   # Loaded module rlm_eap
> >   # Loading module "eap" from file /etc/raddb/mods-enabled/eap
> >   eap {
> >         default_eap_type = "peap"
> >         timer_expire = 60
> >         ignore_unknown_eap_types = no
> >         cisco_accounting_username_bug = no
> >         max_sessions = 16384
> >   }
> >   # Loaded module rlm_exec
> >   # Loading module "echo" from file /etc/raddb/mods-enabled/echo
> >   exec echo {
> >         wait = yes
> >         program = "/bin/echo %{User-Name}"
> >         input_pairs = "request"
> >         output_pairs = "reply"
> >         shell_escape = yes
> >   }
> >   # Loading module "exec" from file /etc/raddb/mods-enabled/exec
> >   exec {
> >         wait = no
> >         input_pairs = "request"
> >         shell_escape = yes
> >         timeout = 10
> >   }
> >   # Loaded module rlm_expiration
> >   # Loading module "expiration" from file
> > /etc/raddb/mods-enabled/expiration
> >   # Loaded module rlm_expr
> >   # Loading module "expr" from file /etc/raddb/mods-enabled/expr
> >   expr {
> >         safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> >   }
> >   # Loaded module rlm_files
> >   # Loading module "files" from file /etc/raddb/mods-enabled/files
> >   files {
> >         filename = "/etc/raddb/mods-config/files/authorize"
> >         acctusersfile = "/etc/raddb/mods-config/files/accounting"
> >         preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
> >   }
> >   # Loaded module rlm_linelog
> >   # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
> >   linelog {
> >         filename = "/var/log/radius/linelog"
> >         escape_filenames = no
> >         syslog_severity = "info"
> >         permissions = 384
> >         format = "This is a log message for %{User-Name}"
> >         reference = "messages.%{%{reply:Packet-Type}:-default}"
> >   }
> >   # Loading module "log_accounting" from file
> > /etc/raddb/mods-enabled/linelog
> >   linelog log_accounting {
> >         filename = "/var/log/radius/linelog-accounting"
> >         escape_filenames = no
> >         syslog_severity = "info"
> >         permissions = 384
> >         format = ""
> >         reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> >   }
> >   # Loaded module rlm_logintime
> >   # Loading module "logintime" from file
> /etc/raddb/mods-enabled/logintime
> >   logintime {
> >         minimum_timeout = 60
> >   }
> >   # Loaded module rlm_mschap
> >   # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
> >   mschap {
> >         use_mppe = yes
> >         require_encryption = yes
> >         require_strong = yes
> >         with_ntdomain_hack = yes
> >         ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
> > --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-
> > OCTA.EDU} --challenge=%{mschap:Challenge:-00}
> > --nt-response=%{mschap:NT-Response:-00}"
> >         ntlm_auth_timeout = 10
> >    passchange {
> >         ntlm_auth = "/usr/bin/ntlm_auth
> > --helper-protocol=ntlm-change-password-1"
> >         ntlm_auth_username = "username: %{mschap:User-Name}"
> >         ntlm_auth_domain = "nt-domain: %{mschap:NT-Domain}"
> >    }
> >         allow_retry = yes
> >         winbind_retry_with_normalised_username = no
> >   }
> >   # Loading module "ntlm_auth" from file
> /etc/raddb/mods-enabled/ntlm_auth
> >   exec ntlm_auth {
> >         wait = yes
> >         program = "/usr/bin/ntlm_auth --request-nt-key
> > --domain=OCTA.EDU --username=%{mschap:User-Name}
> --password=%{User-Password}"
> >         shell_escape = yes
> >   }
> >   # Loaded module rlm_pap
> >   # Loading module "pap" from file /etc/raddb/mods-enabled/pap
> >   pap {
> >         normalise = yes
> >   }
> >   # Loaded module rlm_passwd
> >   # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
> >   passwd etc_passwd {
> >         filename = "/etc/passwd"
> >         format = "*User-Name:Cleartext-Password:"
> >         delimiter = ":"
> >         ignore_nislike = no
> >         ignore_empty = yes
> >         allow_multiple_keys = no
> >         hash_size = 100
> >   }
> >   # Loaded module rlm_preprocess
> >   # Loading module "preprocess" from file
> > /etc/raddb/mods-enabled/preprocess
> >   preprocess {
> >         huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
> >         hints = "/etc/raddb/mods-config/preprocess/hints"
> >         with_ascend_hack = no
> >         ascend_channels_per_line = 23
> >         with_ntdomain_hack = no
> >         with_specialix_jetstream_hack = no
> >         with_cisco_vsa_hack = no
> >         with_alvarion_vsa_hack = no
> >   }
> >   # Loaded module rlm_radutmp
> >   # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
> >   radutmp {
> >         filename = "/var/log/radius/radutmp"
> >         username = "%{User-Name}"
> >         case_sensitive = no
> >         check_with_nas = yes
> >         permissions = 384
> >         caller_id = yes
> >   }
> >   # Loaded module rlm_realm
> >   # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
> >   realm IPASS {
> >         format = "prefix"
> >         delimiter = "/"
> >         ignore_default = no
> >         ignore_null = no
> >   }
> >   # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
> >   realm suffix {
> >         format = "suffix"
> >         delimiter = "@"
> >         ignore_default = no
> >         ignore_null = no
> >   }
> >   # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
> >   realm realmpercent {
> >         format = "suffix"
> >         delimiter = "%"
> >         ignore_default = no
> >         ignore_null = no
> >   }
> >   # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
> >   realm ntdomain {
> >         format = "prefix"
> >         delimiter = "\\"
> >         ignore_default = no
> >         ignore_null = no
> >   }
> >   # Loaded module rlm_replicate
> >   # Loading module "replicate" from file
> /etc/raddb/mods-enabled/replicate
> >   # Loaded module rlm_soh
> >   # Loading module "soh" from file /etc/raddb/mods-enabled/soh
> >   soh {
> >         dhcp = yes
> >   }
> >   # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
> >   radutmp sradutmp {
> >         filename = "/var/log/radius/sradutmp"
> >         username = "%{User-Name}"
> >         case_sensitive = yes
> >         check_with_nas = yes
> >         permissions = 420
> >         caller_id = no
> >   }
> >   # Loaded module rlm_unix
> >   # Loading module "unix" from file /etc/raddb/mods-enabled/unix
> >   unix {
> >         radwtmp = "/var/log/radius/radwtmp"
> >   }
> > Creating attribute Unix-Group
> >   # Loaded module rlm_unpack
> >   # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
> >   # Loaded module rlm_utf8
> >   # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
> >   # Loaded module rlm_sql
> >   # Loading module "sql" from file /etc/raddb/mods-enabled/sql
> >   sql {
> >         driver = "rlm_sql_mysql"
> >         server = "localhost"
> >         port = 3306
> >         login = "root"
> >         password = <<< secret >>>
> >         radius_db = "radius"
> >         read_groups = yes
> >         read_profiles = yes
> >         read_clients = yes
> >         delete_stale_sessions = yes
> >         sql_user_name = "%{User-Name}"
> >         logfile = "/var/log/radius/sqllog.sql"
> >         default_user_profile = ""
> >         client_query = "SELECT id, nasname, shortname, type, secret,
> > server FROM nas"
> >         authorize_check_query = "SELECT id, username, attribute,
> > value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> >         authorize_reply_query = "SELECT id, username, attribute,
> > value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> >         authorize_group_check_query = "SELECT id, groupname,
> > attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}'
> ORDER BY id"
> >         authorize_group_reply_query = "SELECT id, groupname,
> > attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}'
> ORDER BY id"
> >         group_membership_query = "SELECT groupname FROM radusergroup
> > WHERE username = '%{SQL-User-Name}' ORDER BY priority"
> >         simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
> > username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
> >         simul_verify_query = "SELECT radacctid, acctsessionid,
> > username, nasipaddress, nasportid, framedipaddress, callingstationid,
> > framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND
> acctstoptime IS NULL"
> >         safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> >    accounting {
> >         reference = "%{tolower:type.%{Acct-Status-Type}.query}"
> >     type {
> >      accounting-on {
> >         query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   =
> > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
> > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> >      }
> >      accounting-off {
> >         query = "UPDATE radacct SET acctstoptime =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   =
> > '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
> > acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> > acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
> > acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
> >      }
> >      start {
> >         query = "INSERT INTO radacct (acctsessionid,
> > acctuniqueid,           username, realm,
> > nasipaddress,           nasportid, nasporttype,         acctstarttime,
> >     acctupdatetime, acctstoptime,           acctsessiontime,
> > acctauthentic, connectinfo_start,       connectinfo_stop,
> >  acctinputoctets, acctoutputoctets,      calledstationid,
> > callingstationid, acctterminatecause,   servicetype,
> > framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
> > '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> > '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
> > '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}),
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
> > '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> > '%{Called-Station-Id}', '%{Calling-Station-Id}', '',
> > '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
> >      }
> >      interim-update {
> >         query = "UPDATE radacct SET acctupdatetime  =
> > (@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    =
> > %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
> > framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> > '%{Acct-Unique-Session-Id}'"
> >      }
> >      stop {
> >         query = "UPDATE radacct SET acctstoptime        =
> > FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    =
> > %{%{Acct-Session-Time}:-NULL}, acctinputoctets        =
> > '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> > acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> > '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> > '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> > AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> >      }
> >     }
> >    }
> >    post-auth {
> >         reference = ".query"
> >         query = "INSERT INTO radpostauth (username, pass, reply,
> > authdate) VALUES ( '%{SQL-User-Name}',
> > '%{%{User-Password}:-%{Chap-Password}}',
> > '%{reply:Packet-Type}', '%S')"
> >    }
> >   }
> > rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> > linked Creating attribute SQL-Group
> >   instantiate {
> >   }
> >   # Instantiating module "reject" from file
> /etc/raddb/mods-enabled/always
> >   # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
> >   # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
> >   # Instantiating module "handled" from file
> /etc/raddb/mods-enabled/always
> >   # Instantiating module "invalid" from file
> /etc/raddb/mods-enabled/always
> >   # Instantiating module "userlock" from file
> > /etc/raddb/mods-enabled/always
> >   # Instantiating module "notfound" from file
> > /etc/raddb/mods-enabled/always
> >   # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
> >   # Instantiating module "updated" from file
> /etc/raddb/mods-enabled/always
> >   # Instantiating module "attr_filter.post-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
> >   # Instantiating module "attr_filter.pre-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
> >   # Instantiating module "attr_filter.access_reject" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> > [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay"    found in filter list for realm "DEFAULT".
> > [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay-USec"       found in filter list for realm
> > "DEFAULT".
> >   # Instantiating module "attr_filter.access_challenge" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
> >   # Instantiating module "attr_filter.accounting_response" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/raddb/mods-config/attr_filter/accounting_response
> >   # Instantiating module "cache_eap" from file
> > /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver
> > rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
> >   # Instantiating module "detail" from file
> /etc/raddb/mods-enabled/detail
> >   # Instantiating module "auth_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> > detail output
> >   # Instantiating module "reply_log" from file
> > /etc/raddb/mods-enabled/detail.log
> >   # Instantiating module "pre_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> >   # Instantiating module "post_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> >   # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
> >    # Linked to sub-module rlm_eap_tls
> >    tls {
> >         tls = "tls-common"
> >    }
> >    tls-config tls-common {
> >         verify_depth = 0
> >         ca_path = "/etc/raddb/certs"
> >         pem_file_type = yes
> >         private_key_file = "/etc/raddb/certs/server.pem"
> >         certificate_file = "/etc/raddb/certs/server.pem"
> >         ca_file = "/etc/raddb/certs/ca.pem"
> >         private_key_password = <<< secret >>>
> >         fragment_size = 1024
> >         include_length = yes
> >         auto_chain = yes
> >         check_crl = no
> >         check_all_crl = no
> >         cipher_list = "DEFAULT"
> >         cipher_server_preference = no
> >         ecdh_curve = "prime256v1"
> >     cache {
> >         enable = no
> >         lifetime = 24
> >         max_entries = 255
> >     }
> >     verify {
> >         skip_if_ocsp_ok = no
> >     }
> >     ocsp {
> >         enable = no
> >         override_cert_url = yes
> >         url = "http://127.0.0.1/ocsp/"
> >         use_nonce = yes
> >         timeout = 0
> >         softfail = no
> >     }
> >    }
> >    # Linked to sub-module rlm_eap_ttls
> >    ttls {
> >         tls = "tls-common"
> >         default_eap_type = "md5"
> >         copy_request_to_tunnel = no
> >         use_tunneled_reply = no
> >         virtual_server = "inner-tunnel"
> >         include_length = yes
> >         require_client_cert = no
> >    }
> > tls: Using cached TLS configuration from previous invocation
> >    # Linked to sub-module rlm_eap_peap
> >    peap {
> >         tls = "tls-common"
> >         default_eap_type = "mschapv2"
> >         copy_request_to_tunnel = yes
> >         use_tunneled_reply = yes
> >         proxy_tunneled_request_as_eap = no
> >         virtual_server = "inner-tunnel"
> >         soh = no
> >         require_client_cert = no
> >    }
> > tls: Using cached TLS configuration from previous invocation
> >    # Linked to sub-module rlm_eap_mschapv2
> >    mschapv2 {
> >         with_ntdomain_hack = no
> >         send_error = yes
> >         identity = "FreeRADIUS"
> >    }
> >   # Instantiating module "expiration" from file
> > /etc/raddb/mods-enabled/expiration
> >   # Instantiating module "files" from file
> > /etc/raddb/mods-enabled/files reading pairlist file
> > /etc/raddb/mods-config/files/authorize
> > reading pairlist file /etc/raddb/mods-config/files/accounting
> > reading pairlist file /etc/raddb/mods-config/files/pre-proxy
> >   # Instantiating module "linelog" from file
> > /etc/raddb/mods-enabled/linelog
> >   # Instantiating module "log_accounting" from file
> > /etc/raddb/mods-enabled/linelog
> >   # Instantiating module "logintime" from file
> > /etc/raddb/mods-enabled/logintime
> >   # Instantiating module "mschap" from file
> > /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by
> calling 'ntlm_auth'
> >   # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
> >   # Instantiating module "etc_passwd" from file
> > /etc/raddb/mods-enabled/passwd
> > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> >   # Instantiating module "preprocess" from file
> > /etc/raddb/mods-enabled/preprocess
> > reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> > reading pairlist file /etc/raddb/mods-config/preprocess/hints
> >   # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
> >   # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
> >   # Instantiating module "realmpercent" from file
> > /etc/raddb/mods-enabled/realm
> >   # Instantiating module "ntdomain" from file
> /etc/raddb/mods-enabled/realm
> >   # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
> > rlm_sql_mysql: libmysql version: 10.1.37-MariaDB
> >    mysql {
> >     tls {
> >     }
> >         warnings = "auto"
> >    }
> > rlm_sql (sql): Attempting to connect to database "radius"
> > rlm_sql (sql): Initialising connection pool
> >    pool {
> >         start = 5
> >         min = 3
> >         max = 32
> >         spare = 10
> >         uses = 0
> >         lifetime = 0
> >         cleanup_interval = 30
> >         idle_timeout = 60
> >         retry_delay = 30
> >         spread = no
> >    }
> > rlm_sql (sql): Opening additional connection (0), 1 of 32 pending
> > slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Opening additional connection (1), 1 of 31 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Opening additional connection (2), 1 of 30 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Opening additional connection (3), 1 of 29 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Opening additional connection (4), 1 of 28 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
> > (sql): Processing generate_sql_clients rlm_sql (sql) in
> > generate_sql_clients: query is SELECT id, nasname, shortname, type,
> > secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql
> > (sql): Executing select query: SELECT id, nasname, shortname, type,
> > secret, server FROM nas rlm_sql (sql): Adding client 10.0.0.38 (domain
> > controller) to global clients list rlm_sql (10.0.0.38): Client "domain
> > controller" (sql) added rlm_sql (sql): Adding client 10.0.0.39 (domain
> > contr-2) to global clients list rlm_sql (10.0.0.39): Client "domain
> > contr-2" (sql) added rlm_sql (sql): Adding client 10.1.172.16 (team2)
> > to global clients list rlm_sql (10.1.172.16): Client "team2" (sql)
> > added rlm_sql (sql): Adding client 10.1.172.18 (team4) to global
> > clients list rlm_sql (10.1.172.18): Client "team4" (sql) added rlm_sql
> > (sql): Adding client 10.1.172.19 (team5) to global clients list
> > rlm_sql (10.1.172.19): Client "team5" (sql) added rlm_sql (sql):
> > Adding client 10.1.172.20 (team6) to global clients list rlm_sql
> > (10.1.172.20): Client "team6" (sql) added rlm_sql (sql): Adding client
> > 10.0.0.1 (Local network) to global clients list rlm_sql (10.0.0.1):
> > Client "Local network" (sql) added rlm_sql (sql): Adding client
> > 192.168.20.1 (ACCT) to global clients list rlm_sql (192.168.20.1):
> > Client "ACCT" (sql) added rlm_sql (sql): Released connection (0) Need
> > 5 more connections to reach 10 spares rlm_sql (sql): Opening
> > additional connection (5), 1 of 27 pending slots used
> > rlm_sql_mysql: Starting connect to MySQL server
> > rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> > socket, server version 10.1.37-MariaDB, protocol version 10  } #
> > modules
> > radiusd: #### Loading Virtual Servers #### server { # from file
> > /etc/raddb/radiusd.conf } # server server default { # from file
> > /etc/raddb/sites-enabled/default  # Loading authenticate {...}  #
> > Loading authorize {...} Ignoring "ldap" (see
> > raddb/mods-available/README.rst)  # Loading preacct {...}  # Loading
> > accounting {...} } # server default server inner-tunnel { # from file
> > /etc/raddb/sites-enabled/inner-tunnel
> >  # Loading authenticate {...}
> >  # Loading authorize {...}
> >  # Loading session {...}
> >  # Loading post-auth {...}
> > } # server inner-tunnel
> > radiusd: #### Opening IP addresses and Ports #### listen {
> >         type = "auth"
> >         ipaddr = *
> >         port = 0
> >    limit {
> >         max_connections = 16
> >         lifetime = 0
> >         idle_timeout = 0
> >    }
> > Failed binding to auth address * port 1812 bound to server default:
> > Address already in use
> > /etc/raddb/sites-enabled/default[60]: Error binding to port for
> > 0.0.0.0 port 1812
> >
> > ------------------------------
> >
> > Subject: Digest Footer
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> > ------------------------------
> >
> > End of Freeradius-Users Digest, Vol 165, Issue 69
> > *************************************************
> >
> >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
>
>
> ------------------------------
>
> Subject: Digest Footer
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
> ------------------------------
>
> End of Freeradius-Users Digest, Vol 165, Issue 71
> *************************************************
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
>


More information about the Freeradius-Users mailing list