Can't start my server

Eero Volotinen eero.volotinen at iki.fi
Mon Jan 28 22:41:05 CET 2019


just kill -9 pidofradius?

Eero

On Mon, Jan 28, 2019, 23:39 Conroy Bosco Martins <cbm2612 at rit.edu wrote:

> Hello all,
>
> I am getting this error message when I run the server in the debug mode. I
> already tried stopping the server and running it again but it is not work.
>
> Please can someone help me.
>
> user at user-Standard-PC-i440FX-PIIX-1996:~$ sudo freeradius -X
> FreeRADIUS Version 3.0.16
> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/3.0/dictionary
> including configuration file /etc/freeradius/3.0/radiusd.conf
> including configuration file /etc/freeradius/3.0/proxy.conf
> including configuration file /etc/freeradius/3.0/clients.conf
> including files in directory /etc/freeradius/3.0/mods-enabled/
> including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> including configuration file /etc/freeradius/3.0/mods-enabled/realm
> including configuration file /etc/freeradius/3.0/mods-enabled/files
> including configuration file /etc/freeradius/3.0/mods-enabled/pap
> including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> including configuration file /etc/freeradius/3.0/mods-enabled/exec
> including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> including configuration file
> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/3.0/mods-enabled/always
> including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> including configuration file /etc/freeradius/3.0/mods-enabled/echo
> including configuration file /etc/freeradius/3.0/mods-enabled/expr
> including configuration file /etc/freeradius/3.0/mods-enabled/soh
> including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> including configuration file /etc/freeradius/3.0/mods-enabled/unix
> including configuration file /etc/freeradius/3.0/mods-enabled/eap
> including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> including configuration file /etc/freeradius/3.0/mods-enabled/chap
> including configuration file /etc/freeradius/3.0/mods-enabled/detail
> including configuration file /etc/freeradius/3.0/mods-enabled/digest
> including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
> including files in directory /etc/freeradius/3.0/policy.d/
> including configuration file /etc/freeradius/3.0/policy.d/cui
> including configuration file /etc/freeradius/3.0/policy.d/accounting
> including configuration file /etc/freeradius/3.0/policy.d/filter
> including configuration file /etc/freeradius/3.0/policy.d/operator-name
> including configuration file /etc/freeradius/3.0/policy.d/debug
> including configuration file
> /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> including configuration file /etc/freeradius/3.0/policy.d/canonicalization
> including configuration file /etc/freeradius/3.0/policy.d/eap
> including configuration file /etc/freeradius/3.0/policy.d/dhcp
> including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> including configuration file /etc/freeradius/3.0/policy.d/control
> including files in directory /etc/freeradius/3.0/sites-enabled/
> including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/3.0/sites-enabled/default
> main {
>  security {
>         user = "freerad"
>         group = "freerad"
>         allow_core_dumps = no
>  }
>         name = "freeradius"
>         prefix = "/usr"
>         localstatedir = "/var"
>         logdir = "/var/log/freeradius"
>         run_dir = "/var/run/freeradius"
> }
> main {
>         name = "freeradius"
>         prefix = "/usr"
>         localstatedir = "/var"
>         sbindir = "/usr/sbin"
>         logdir = "/var/log/freeradius"
>         run_dir = "/var/run/freeradius"
>         libdir = "/usr/lib/freeradius"
>         radacctdir = "/var/log/freeradius/radacct"
>         hostname_lookups = no
>         max_request_time = 30
>         cleanup_delay = 5
>         max_requests = 16384
>         pidfile = "/var/run/freeradius/freeradius.pid"
>         checkrad = "/usr/sbin/checkrad"
>         debug_level = 0
>         proxy_requests = yes
>  log {
>         stripped_names = no
>         auth = no
>         auth_badpass = no
>         auth_goodpass = no
>         colourise = yes
>         msg_denied = "You are already logged in - access denied"
>  }
>  resources {
>  }
>  security {
>         max_attributes = 200
>         reject_delay = 1.000000
>         status_server = yes
>  }
> }
> radiusd: #### Loading Realms and Home Servers ####
>  proxy server {
>         retry_delay = 5
>         retry_count = 3
>         default_fallback = no
>         dead_time = 120
>         wake_all_if_all_dead = no
>  }
>  home_server localhost {
>         ipaddr = 127.0.0.1
>         port = 1812
>         type = "auth"
>         secret = <<< secret >>>
>         response_window = 20.000000
>         response_timeouts = 1
>         max_outstanding = 65536
>         zombie_period = 40
>         status_check = "status-server"
>         ping_interval = 30
>         check_interval = 30
>         check_timeout = 4
>         num_answers_to_alive = 3
>         revive_interval = 120
>   limit {
>         max_connections = 16
>         max_requests = 0
>         lifetime = 0
>         idle_timeout = 0
>   }
>   coa {
>         irt = 2
>         mrt = 16
>         mrc = 5
>         mrd = 30
>   }
>  }
>  home_server_pool my_auth_failover {
>         type = fail-over
>         home_server = localhost
>  }
>  realm example.com {
>         auth_pool = my_auth_failover
>  }
>  realm LOCAL {
>  }
> radiusd: #### Loading Clients ####
>  client Try {
>         ipaddr = 172.26.1.103
>         require_message_authenticator = no
>         secret = <<< secret >>>
>         shortname = "Council_Rock"
>   limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>   }
>  }
>  client localhost {
>         ipaddr = 127.0.0.1
>         require_message_authenticator = no
>         secret = <<< secret >>>
>         nas_type = "other"
>         proto = "*"
>   limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>   }
>  }
>  client localhost_ipv6 {
>         ipv6addr = ::1
>         require_message_authenticator = no
>         secret = <<< secret >>>
>   limit {
>         max_connections = 16
>         lifetime = 0
>         idle_timeout = 30
>   }
>  }
> Debugger not attached
>  # Creating Auth-Type = mschap
>  # Creating Auth-Type = eap
>  # Creating Auth-Type = PAP
>  # Creating Auth-Type = CHAP
>  # Creating Auth-Type = MS-CHAP
>  # Creating Auth-Type = digest
> radiusd: #### Instantiating modules ####
>  modules {
>   # Loaded module rlm_radutmp
>   # Loading module "radutmp" from file
> /etc/freeradius/3.0/mods-enabled/radutmp
>   radutmp {
>         filename = "/var/log/freeradius/radutmp"
>         username = "%{User-Name}"
>         case_sensitive = yes
>         check_with_nas = yes
>         permissions = 384
>         caller_id = yes
>   }
>   # Loaded module rlm_cache
>   # Loading module "cache_eap" from file
> /etc/freeradius/3.0/mods-enabled/cache_eap
>   cache cache_eap {
>         driver = "rlm_cache_rbtree"
>         key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>         ttl = 15
>         max_entries = 0
>         epoch = 0
>         add_stats = no
>   }
>   # Loaded module rlm_realm
>   # Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
>   realm IPASS {
>         format = "prefix"
>         delimiter = "/"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "suffix" from file
> /etc/freeradius/3.0/mods-enabled/realm
>   realm suffix {
>         format = "suffix"
>         delimiter = "@"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "realmpercent" from file
> /etc/freeradius/3.0/mods-enabled/realm
>   realm realmpercent {
>         format = "suffix"
>         delimiter = "%"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loading module "ntdomain" from file
> /etc/freeradius/3.0/mods-enabled/realm
>   realm ntdomain {
>         format = "prefix"
>         delimiter = "\\"
>         ignore_default = no
>         ignore_null = no
>   }
>   # Loaded module rlm_files
>   # Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
>   files {
>         filename = "/etc/freeradius/3.0/mods-config/files/authorize"
>         acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
>         preproxy_usersfile =
> "/etc/freeradius/3.0/mods-config/files/pre-proxy"
>   }
>   # Loaded module rlm_pap
>   # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
>   pap {
>         normalise = yes
>   }
>   # Loading module "sradutmp" from file
> /etc/freeradius/3.0/mods-enabled/sradutmp
>   radutmp sradutmp {
>         filename = "/var/log/freeradius/sradutmp"
>         username = "%{User-Name}"
>         case_sensitive = yes
>         check_with_nas = yes
>         permissions = 420
>         caller_id = no
>   }
>   # Loaded module rlm_replicate
>   # Loading module "replicate" from file
> /etc/freeradius/3.0/mods-enabled/replicate
>   # Loaded module rlm_exec
>   # Loading module "ntlm_auth" from file
> /etc/freeradius/3.0/mods-enabled/ntlm_auth
>   exec ntlm_auth {
>         wait = yes
>         program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
>         shell_escape = yes
>   }
>   # Loaded module rlm_logintime
>   # Loading module "logintime" from file
> /etc/freeradius/3.0/mods-enabled/logintime
>   logintime {
>         minimum_timeout = 60
>   }
>   # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
>   exec {
>         wait = no
>         input_pairs = "request"
>         shell_escape = yes
>         timeout = 10
>   }
>   # Loaded module rlm_linelog
>   # Loading module "linelog" from file
> /etc/freeradius/3.0/mods-enabled/linelog
>   linelog {
>         filename = "/var/log/freeradius/linelog"
>         escape_filenames = no
>         syslog_severity = "info"
>         permissions = 384
>         format = "This is a log message for %{User-Name}"
>         reference = "messages.%{%{reply:Packet-Type}:-default}"
>   }
>   # Loading module "log_accounting" from file
> /etc/freeradius/3.0/mods-enabled/linelog
>   linelog log_accounting {
>         filename = "/var/log/freeradius/linelog-accounting"
>         escape_filenames = no
>         syslog_severity = "info"
>         permissions = 384
>         format = ""
>         reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>   }
>   # Loaded module rlm_dynamic_clients
>   # Loading module "dynamic_clients" from file
> /etc/freeradius/3.0/mods-enabled/dynamic_clients
>   # Loaded module rlm_always
>   # Loading module "reject" from file
> /etc/freeradius/3.0/mods-enabled/always
>   always reject {
>         rcode = "reject"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
>   always fail {
>         rcode = "fail"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
>   always ok {
>         rcode = "ok"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "handled" from file
> /etc/freeradius/3.0/mods-enabled/always
>   always handled {
>         rcode = "handled"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "invalid" from file
> /etc/freeradius/3.0/mods-enabled/always
>   always invalid {
>         rcode = "invalid"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "userlock" from file
> /etc/freeradius/3.0/mods-enabled/always
>   always userlock {
>         rcode = "userlock"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "notfound" from file
> /etc/freeradius/3.0/mods-enabled/always
>   always notfound {
>         rcode = "notfound"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
>   always noop {
>         rcode = "noop"
>         simulcount = 0
>         mpp = no
>   }
>   # Loading module "updated" from file
> /etc/freeradius/3.0/mods-enabled/always
>   always updated {
>         rcode = "updated"
>         simulcount = 0
>         mpp = no
>   }
>   # Loaded module rlm_passwd
>   # Loading module "etc_passwd" from file
> /etc/freeradius/3.0/mods-enabled/passwd
>   passwd etc_passwd {
>         filename = "/etc/passwd"
>         format = "*User-Name:Crypt-Password:"
>         delimiter = ":"
>         ignore_nislike = no
>         ignore_empty = yes
>         allow_multiple_keys = no
>         hash_size = 100
>   }
>   # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
>   exec echo {
>         wait = yes
>         program = "/bin/echo %{User-Name}"
>         input_pairs = "request"
>         output_pairs = "reply"
>         shell_escape = yes
>   }
>   # Loaded module rlm_expr
>   # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
>   expr {
>         safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>   }
>   # Loaded module rlm_soh
>   # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
>   soh {
>         dhcp = yes
>   }
>   # Loaded module rlm_mschap
>   # Loading module "mschap" from file
> /etc/freeradius/3.0/mods-enabled/mschap
>   mschap {
>         use_mppe = yes
>         require_encryption = no
>         require_strong = no
>         with_ntdomain_hack = yes
>    passchange {
>    }
>         allow_retry = yes
>         winbind_retry_with_normalised_username = no
>   }
>   # Loaded module rlm_utf8
>   # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
>   # Loaded module rlm_preprocess
>   # Loading module "preprocess" from file
> /etc/freeradius/3.0/mods-enabled/preprocess
>   preprocess {
>         huntgroups =
> "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
>         hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
>         with_ascend_hack = no
>         ascend_channels_per_line = 23
>         with_ntdomain_hack = no
>         with_specialix_jetstream_hack = no
>         with_cisco_vsa_hack = no
>         with_alvarion_vsa_hack = no
>   }
>   # Loaded module rlm_detail
>   # Loading module "auth_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
>   detail auth_log {
>         filename =
>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "reply_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
>   detail reply_log {
>         filename =
>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "pre_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
>   detail pre_proxy_log {
>         filename =
>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loading module "post_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
>   detail post_proxy_log {
>         filename =
>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loaded module rlm_expiration
>   # Loading module "expiration" from file
> /etc/freeradius/3.0/mods-enabled/expiration
>   # Loaded module rlm_unix
>   # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
>   unix {
>         radwtmp = "/var/log/freeradius/radwtmp"
>   }
> Creating attribute Unix-Group
>   # Loaded module rlm_eap
>   # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
>   eap {
>         default_eap_type = "md5"
>         timer_expire = 60
>         ignore_unknown_eap_types = no
>         cisco_accounting_username_bug = no
>         max_sessions = 16384
>   }
>   # Loaded module rlm_unpack
>   # Loading module "unpack" from file
> /etc/freeradius/3.0/mods-enabled/unpack
>   # Loaded module rlm_chap
>   # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
>   # Loading module "detail" from file
> /etc/freeradius/3.0/mods-enabled/detail
>   detail {
>         filename =
>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>         header = "%t"
>         permissions = 384
>         locking = no
>         escape_filenames = no
>         log_packet_header = no
>   }
>   # Loaded module rlm_digest
>   # Loading module "digest" from file
> /etc/freeradius/3.0/mods-enabled/digest
>   # Loaded module rlm_attr_filter
>   # Loading module "attr_filter.post-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
>   attr_filter attr_filter.post-proxy {
>         filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
>         key = "%{Realm}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.pre-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
>   attr_filter attr_filter.pre-proxy {
>         filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
>         key = "%{Realm}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.access_reject" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
>   attr_filter attr_filter.access_reject {
>         filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.access_challenge" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
>   attr_filter attr_filter.access_challenge {
>         filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   # Loading module "attr_filter.accounting_response" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
>   attr_filter attr_filter.accounting_response {
>         filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
>         key = "%{User-Name}"
>         relaxed = no
>   }
>   instantiate {
>   }
>   # Instantiating module "cache_eap" from file
> /etc/freeradius/3.0/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
>   # Instantiating module "IPASS" from file
> /etc/freeradius/3.0/mods-enabled/realm
>   # Instantiating module "suffix" from file
> /etc/freeradius/3.0/mods-enabled/realm
>   # Instantiating module "realmpercent" from file
> /etc/freeradius/3.0/mods-enabled/realm
>   # Instantiating module "ntdomain" from file
> /etc/freeradius/3.0/mods-enabled/realm
>   # Instantiating module "files" from file
> /etc/freeradius/3.0/mods-enabled/files
> reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
>   # Instantiating module "pap" from file
> /etc/freeradius/3.0/mods-enabled/pap
>   # Instantiating module "logintime" from file
> /etc/freeradius/3.0/mods-enabled/logintime
>   # Instantiating module "linelog" from file
> /etc/freeradius/3.0/mods-enabled/linelog
>   # Instantiating module "log_accounting" from file
> /etc/freeradius/3.0/mods-enabled/linelog
>   # Instantiating module "reject" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "fail" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "ok" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "handled" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "invalid" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "userlock" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "notfound" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "noop" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "updated" from file
> /etc/freeradius/3.0/mods-enabled/always
>   # Instantiating module "etc_passwd" from file
> /etc/freeradius/3.0/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>   # Instantiating module "mschap" from file
> /etc/freeradius/3.0/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
>   # Instantiating module "preprocess" from file
> /etc/freeradius/3.0/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
>   # Instantiating module "auth_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
>   # Instantiating module "reply_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
>   # Instantiating module "pre_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
>   # Instantiating module "post_proxy_log" from file
> /etc/freeradius/3.0/mods-enabled/detail.log
>   # Instantiating module "expiration" from file
> /etc/freeradius/3.0/mods-enabled/expiration
>   # Instantiating module "eap" from file
> /etc/freeradius/3.0/mods-enabled/eap
>    # Linked to sub-module rlm_eap_md5
>    # Linked to sub-module rlm_eap_leap
>    # Linked to sub-module rlm_eap_gtc
>    gtc {
>         challenge = "Password: "
>         auth_type = "PAP"
>    }
>    # Linked to sub-module rlm_eap_tls
>    tls {
>         tls = "tls-common"
>    }
>    tls-config tls-common {
>         verify_depth = 0
>         ca_path = "/etc/freeradius/3.0/certs"
>         pem_file_type = yes
>         private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
>         certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
>         ca_file = "/etc/ssl/certs/ca-certificates.crt"
>         private_key_password = <<< secret >>>
>         dh_file = "/etc/freeradius/3.0/certs/dh"
>         fragment_size = 1024
>         include_length = yes
>         auto_chain = yes
>         check_crl = no
>         check_all_crl = no
>         cipher_list = "DEFAULT"
>         cipher_server_preference = no
>         ecdh_curve = "prime256v1"
>         tls_max_version = ""
>         tls_min_version = "1.0"
>     cache {
>         enable = no
>         lifetime = 24
>         max_entries = 255
>     }
>     verify {
>         skip_if_ocsp_ok = no
>     }
>     ocsp {
>         enable = no
>         override_cert_url = yes
>         url = "http://127.0.0.1/ocsp/"
>         use_nonce = yes
>         timeout = 0
>         softfail = no
>     }
>    }
>    # Linked to sub-module rlm_eap_ttls
>    ttls {
>         tls = "tls-common"
>         default_eap_type = "md5"
>         copy_request_to_tunnel = no
>         use_tunneled_reply = no
>         virtual_server = "inner-tunnel"
>         include_length = yes
>         require_client_cert = no
>    }
> tls: Using cached TLS configuration from previous invocation
>    # Linked to sub-module rlm_eap_peap
>    peap {
>         tls = "tls-common"
>         default_eap_type = "mschapv2"
>         copy_request_to_tunnel = no
>         use_tunneled_reply = no
>         proxy_tunneled_request_as_eap = yes
>         virtual_server = "inner-tunnel"
>         soh = no
>         require_client_cert = no
>    }
> tls: Using cached TLS configuration from previous invocation
>    # Linked to sub-module rlm_eap_mschapv2
>    mschapv2 {
>         with_ntdomain_hack = no
>         send_error = no
>    }
>   # Instantiating module "detail" from file
> /etc/freeradius/3.0/mods-enabled/detail
>   # Instantiating module "attr_filter.post-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
>   # Instantiating module "attr_filter.pre-proxy" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
>   # Instantiating module "attr_filter.access_reject" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay"   found in filter list for realm "DEFAULT".
> [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> "FreeRADIUS-Response-Delay-USec"      found in filter list for realm
> "DEFAULT".
>   # Instantiating module "attr_filter.access_challenge" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
>   # Instantiating module "attr_filter.accounting_response" from file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
>  } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/3.0/radiusd.conf
> } # server
> server inner-tunnel { # from file
> /etc/freeradius/3.0/sites-enabled/inner-tunnel
>  # Loading authenticate {...}
>  # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> Ignoring "ldap" (see raddb/mods-available/README.rst)
>  # Loading session {...}
>  # Loading post-proxy {...}
>  # Loading post-auth {...}
>  # Skipping contents of 'if' as it is always 'false' --
> /etc/freeradius/3.0/sites-enabled/inner-tunnel:331
> } # server inner-tunnel
> server default { # from file /etc/freeradius/3.0/sites-enabled/default
>  # Loading authenticate {...}
>  # Loading authorize {...}
>  # Loading preacct {...}
>  # Loading accounting {...}
>  # Loading post-proxy {...}
>  # Loading post-auth {...}
> } # server default
> radiusd: #### Opening IP addresses and Ports ####
> listen {
>         type = "auth"
>         ipaddr = 127.0.0.1
>         port = 18120
> Failed binding to auth address 127.0.0.1 port 18120 bound to server
> inner-tunnel: Address already in use
> /etc/freeradius/3.0/sites-enabled/inner-tunnel[33]: Error binding to port
> for 127.0.0.1 port 18120
> user at user-Standard-PC-i440FX-PIIX-1996:~$
>
>
> On Mon, Jan 28, 2019 at 4:32 PM Angel Elena <craem at craem.net> wrote:
>
> > this isn't a valid result, start manually freeradius with:
> >
> > # freeradius -X
> >
> > And copy&paste the result. (the answer is this debug)
> >
> >
> >
> >
> >
> > --------------------------------
> > Ángel Elena Medina       _o)
> > craem at craem.net          / \\
> > http://blog.craem.net  _(___V
> > @craem_
> > www.linkedin.com/in/angel-elena-medina
> > --------------------------------
> > Zarafa Webapp.
> >
> > -----Mensaje original-----
> > De:    Conroy Bosco Martins <cbm2612 at rit.edu>
> > Enviado:    Lun 28-01-2019 22:29
> > Asunto:    Can't start my server
> > Para:    freeradius-users at lists.freeradius.org;
> > > Hello all,
> > >
> > > I am unable to start my radius server. It's giving me this error. It
> was
> > > working fine till now and I didn't make any configuration changes. So I
> > > don't know why is this error coming up.
> > >
> > > Please can anyone help me.
> > >
> > > user at user-Standard-PC-i440FX-PIIX-1996:/etc/freeradius/3.0$ sudo
> > systemctl
> > > restart freeradius
> > > Job for freeradius.service failed because the control process exited
> with
> > > error code.
> > > See "systemctl status freeradius.service" and "journalctl -xe" for
> > details.
> > >
> > > user at user-Standard-PC-i440FX-PIIX-1996:/etc/freeradius/3.0$ sudo
> > systemctl
> > > status freeradius
> > >
> > >  ● freeradius.service - FreeRADIUS multi-protocol policy server
> > >    Loaded: loaded (/lib/systemd/system/freeradius.service; disabled;
> > vendor
> > > preset: enabled)
> > >    Active: activating (auto-restart) (Result: exit-code) since Mon
> > > 2019-01-28 16:21:01 EST; 4s ago
> > >      Docs: man:radiusd(8)
> > >            man:radiusd.conf(5)
> > >            http://wiki.freeradius.org/
> > >            http://networkradius.com/doc/
> > >   Process: 14788 ExecStart=/usr/sbin/freeradius $FREERADIUS_OPTIONS
> > > (code=exited, status=1/FAILURE)
> > >   Process: 14786 ExecStartPre=/usr/sbin/freeradius $FREERADIUS_OPTIONS
> > -Cxm
> > > -lstdout (code=exited, status=0/SUCCESS)
> > > -
> > > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> >
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html


More information about the Freeradius-Users mailing list