Can't start my server
Alan Buxey
alan.buxey at gmail.com
Mon Jan 28 23:09:27 CET 2019
you either have another copy of the server still running (so kill it) or
you have configured your server to listen to the same localhost port for eg
the control-socket stuff (that port 18120)
alan
On Mon, 28 Jan 2019 at 21:41, Eero Volotinen <eero.volotinen at iki.fi> wrote:
> just kill -9 pidofradius?
>
> Eero
>
> On Mon, Jan 28, 2019, 23:39 Conroy Bosco Martins <cbm2612 at rit.edu wrote:
>
> > Hello all,
> >
> > I am getting this error message when I run the server in the debug mode.
> I
> > already tried stopping the server and running it again but it is not
> work.
> >
> > Please can someone help me.
> >
> > user at user-Standard-PC-i440FX-PIIX-1996:~$ sudo freeradius -X
> > FreeRADIUS Version 3.0.16
> > Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
> > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE
> > You may redistribute copies of FreeRADIUS under the terms of the
> > GNU General Public License
> > For more information about these matters, see the file named COPYRIGHT
> > Starting - reading configuration files ...
> > including dictionary file /usr/share/freeradius/dictionary
> > including dictionary file /usr/share/freeradius/dictionary.dhcp
> > including dictionary file /usr/share/freeradius/dictionary.vqp
> > including dictionary file /etc/freeradius/3.0/dictionary
> > including configuration file /etc/freeradius/3.0/radiusd.conf
> > including configuration file /etc/freeradius/3.0/proxy.conf
> > including configuration file /etc/freeradius/3.0/clients.conf
> > including files in directory /etc/freeradius/3.0/mods-enabled/
> > including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> > including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> > including configuration file /etc/freeradius/3.0/mods-enabled/realm
> > including configuration file /etc/freeradius/3.0/mods-enabled/files
> > including configuration file /etc/freeradius/3.0/mods-enabled/pap
> > including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> > including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> > including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> > including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> > including configuration file /etc/freeradius/3.0/mods-enabled/exec
> > including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> > including configuration file
> > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > including configuration file /etc/freeradius/3.0/mods-enabled/always
> > including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> > including configuration file /etc/freeradius/3.0/mods-enabled/echo
> > including configuration file /etc/freeradius/3.0/mods-enabled/expr
> > including configuration file /etc/freeradius/3.0/mods-enabled/soh
> > including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> > including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> > including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> > including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> > including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> > including configuration file /etc/freeradius/3.0/mods-enabled/unix
> > including configuration file /etc/freeradius/3.0/mods-enabled/eap
> > including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> > including configuration file /etc/freeradius/3.0/mods-enabled/chap
> > including configuration file /etc/freeradius/3.0/mods-enabled/detail
> > including configuration file /etc/freeradius/3.0/mods-enabled/digest
> > including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
> > including files in directory /etc/freeradius/3.0/policy.d/
> > including configuration file /etc/freeradius/3.0/policy.d/cui
> > including configuration file /etc/freeradius/3.0/policy.d/accounting
> > including configuration file /etc/freeradius/3.0/policy.d/filter
> > including configuration file /etc/freeradius/3.0/policy.d/operator-name
> > including configuration file /etc/freeradius/3.0/policy.d/debug
> > including configuration file
> > /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> > including configuration file
> /etc/freeradius/3.0/policy.d/canonicalization
> > including configuration file /etc/freeradius/3.0/policy.d/eap
> > including configuration file /etc/freeradius/3.0/policy.d/dhcp
> > including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> > including configuration file /etc/freeradius/3.0/policy.d/control
> > including files in directory /etc/freeradius/3.0/sites-enabled/
> > including configuration file
> /etc/freeradius/3.0/sites-enabled/inner-tunnel
> > including configuration file /etc/freeradius/3.0/sites-enabled/default
> > main {
> > security {
> > user = "freerad"
> > group = "freerad"
> > allow_core_dumps = no
> > }
> > name = "freeradius"
> > prefix = "/usr"
> > localstatedir = "/var"
> > logdir = "/var/log/freeradius"
> > run_dir = "/var/run/freeradius"
> > }
> > main {
> > name = "freeradius"
> > prefix = "/usr"
> > localstatedir = "/var"
> > sbindir = "/usr/sbin"
> > logdir = "/var/log/freeradius"
> > run_dir = "/var/run/freeradius"
> > libdir = "/usr/lib/freeradius"
> > radacctdir = "/var/log/freeradius/radacct"
> > hostname_lookups = no
> > max_request_time = 30
> > cleanup_delay = 5
> > max_requests = 16384
> > pidfile = "/var/run/freeradius/freeradius.pid"
> > checkrad = "/usr/sbin/checkrad"
> > debug_level = 0
> > proxy_requests = yes
> > log {
> > stripped_names = no
> > auth = no
> > auth_badpass = no
> > auth_goodpass = no
> > colourise = yes
> > msg_denied = "You are already logged in - access denied"
> > }
> > resources {
> > }
> > security {
> > max_attributes = 200
> > reject_delay = 1.000000
> > status_server = yes
> > }
> > }
> > radiusd: #### Loading Realms and Home Servers ####
> > proxy server {
> > retry_delay = 5
> > retry_count = 3
> > default_fallback = no
> > dead_time = 120
> > wake_all_if_all_dead = no
> > }
> > home_server localhost {
> > ipaddr = 127.0.0.1
> > port = 1812
> > type = "auth"
> > secret = <<< secret >>>
> > response_window = 20.000000
> > response_timeouts = 1
> > max_outstanding = 65536
> > zombie_period = 40
> > status_check = "status-server"
> > ping_interval = 30
> > check_interval = 30
> > check_timeout = 4
> > num_answers_to_alive = 3
> > revive_interval = 120
> > limit {
> > max_connections = 16
> > max_requests = 0
> > lifetime = 0
> > idle_timeout = 0
> > }
> > coa {
> > irt = 2
> > mrt = 16
> > mrc = 5
> > mrd = 30
> > }
> > }
> > home_server_pool my_auth_failover {
> > type = fail-over
> > home_server = localhost
> > }
> > realm example.com {
> > auth_pool = my_auth_failover
> > }
> > realm LOCAL {
> > }
> > radiusd: #### Loading Clients ####
> > client Try {
> > ipaddr = 172.26.1.103
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > shortname = "Council_Rock"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > client localhost {
> > ipaddr = 127.0.0.1
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > nas_type = "other"
> > proto = "*"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > client localhost_ipv6 {
> > ipv6addr = ::1
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > Debugger not attached
> > # Creating Auth-Type = mschap
> > # Creating Auth-Type = eap
> > # Creating Auth-Type = PAP
> > # Creating Auth-Type = CHAP
> > # Creating Auth-Type = MS-CHAP
> > # Creating Auth-Type = digest
> > radiusd: #### Instantiating modules ####
> > modules {
> > # Loaded module rlm_radutmp
> > # Loading module "radutmp" from file
> > /etc/freeradius/3.0/mods-enabled/radutmp
> > radutmp {
> > filename = "/var/log/freeradius/radutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 384
> > caller_id = yes
> > }
> > # Loaded module rlm_cache
> > # Loading module "cache_eap" from file
> > /etc/freeradius/3.0/mods-enabled/cache_eap
> > cache cache_eap {
> > driver = "rlm_cache_rbtree"
> > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> > ttl = 15
> > max_entries = 0
> > epoch = 0
> > add_stats = no
> > }
> > # Loaded module rlm_realm
> > # Loading module "IPASS" from file
> /etc/freeradius/3.0/mods-enabled/realm
> > realm IPASS {
> > format = "prefix"
> > delimiter = "/"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "suffix" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > realm suffix {
> > format = "suffix"
> > delimiter = "@"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "realmpercent" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > realm realmpercent {
> > format = "suffix"
> > delimiter = "%"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "ntdomain" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > realm ntdomain {
> > format = "prefix"
> > delimiter = "\\"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loaded module rlm_files
> > # Loading module "files" from file
> /etc/freeradius/3.0/mods-enabled/files
> > files {
> > filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> > acctusersfile =
> "/etc/freeradius/3.0/mods-config/files/accounting"
> > preproxy_usersfile =
> > "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> > }
> > # Loaded module rlm_pap
> > # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> > pap {
> > normalise = yes
> > }
> > # Loading module "sradutmp" from file
> > /etc/freeradius/3.0/mods-enabled/sradutmp
> > radutmp sradutmp {
> > filename = "/var/log/freeradius/sradutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 420
> > caller_id = no
> > }
> > # Loaded module rlm_replicate
> > # Loading module "replicate" from file
> > /etc/freeradius/3.0/mods-enabled/replicate
> > # Loaded module rlm_exec
> > # Loading module "ntlm_auth" from file
> > /etc/freeradius/3.0/mods-enabled/ntlm_auth
> > exec ntlm_auth {
> > wait = yes
> > program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> > --username=%{mschap:User-Name} --password=%{User-Password}"
> > shell_escape = yes
> > }
> > # Loaded module rlm_logintime
> > # Loading module "logintime" from file
> > /etc/freeradius/3.0/mods-enabled/logintime
> > logintime {
> > minimum_timeout = 60
> > }
> > # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
> > exec {
> > wait = no
> > input_pairs = "request"
> > shell_escape = yes
> > timeout = 10
> > }
> > # Loaded module rlm_linelog
> > # Loading module "linelog" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> > linelog {
> > filename = "/var/log/freeradius/linelog"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = "This is a log message for %{User-Name}"
> > reference = "messages.%{%{reply:Packet-Type}:-default}"
> > }
> > # Loading module "log_accounting" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> > linelog log_accounting {
> > filename = "/var/log/freeradius/linelog-accounting"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = ""
> > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> > }
> > # Loaded module rlm_dynamic_clients
> > # Loading module "dynamic_clients" from file
> > /etc/freeradius/3.0/mods-enabled/dynamic_clients
> > # Loaded module rlm_always
> > # Loading module "reject" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always reject {
> > rcode = "reject"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "fail" from file
> /etc/freeradius/3.0/mods-enabled/always
> > always fail {
> > rcode = "fail"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
> > always ok {
> > rcode = "ok"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "handled" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always handled {
> > rcode = "handled"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "invalid" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always invalid {
> > rcode = "invalid"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "userlock" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always userlock {
> > rcode = "userlock"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "notfound" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always notfound {
> > rcode = "notfound"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "noop" from file
> /etc/freeradius/3.0/mods-enabled/always
> > always noop {
> > rcode = "noop"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "updated" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > always updated {
> > rcode = "updated"
> > simulcount = 0
> > mpp = no
> > }
> > # Loaded module rlm_passwd
> > # Loading module "etc_passwd" from file
> > /etc/freeradius/3.0/mods-enabled/passwd
> > passwd etc_passwd {
> > filename = "/etc/passwd"
> > format = "*User-Name:Crypt-Password:"
> > delimiter = ":"
> > ignore_nislike = no
> > ignore_empty = yes
> > allow_multiple_keys = no
> > hash_size = 100
> > }
> > # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
> > exec echo {
> > wait = yes
> > program = "/bin/echo %{User-Name}"
> > input_pairs = "request"
> > output_pairs = "reply"
> > shell_escape = yes
> > }
> > # Loaded module rlm_expr
> > # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
> > expr {
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> > }
> > # Loaded module rlm_soh
> > # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> > soh {
> > dhcp = yes
> > }
> > # Loaded module rlm_mschap
> > # Loading module "mschap" from file
> > /etc/freeradius/3.0/mods-enabled/mschap
> > mschap {
> > use_mppe = yes
> > require_encryption = no
> > require_strong = no
> > with_ntdomain_hack = yes
> > passchange {
> > }
> > allow_retry = yes
> > winbind_retry_with_normalised_username = no
> > }
> > # Loaded module rlm_utf8
> > # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
> > # Loaded module rlm_preprocess
> > # Loading module "preprocess" from file
> > /etc/freeradius/3.0/mods-enabled/preprocess
> > preprocess {
> > huntgroups =
> > "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> > hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> > with_ascend_hack = no
> > ascend_channels_per_line = 23
> > with_ntdomain_hack = no
> > with_specialix_jetstream_hack = no
> > with_cisco_vsa_hack = no
> > with_alvarion_vsa_hack = no
> > }
> > # Loaded module rlm_detail
> > # Loading module "auth_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail auth_log {
> > filename =
> >
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "reply_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail reply_log {
> > filename =
> >
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "pre_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail pre_proxy_log {
> > filename =
> >
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "post_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > detail post_proxy_log {
> > filename =
> >
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loaded module rlm_expiration
> > # Loading module "expiration" from file
> > /etc/freeradius/3.0/mods-enabled/expiration
> > # Loaded module rlm_unix
> > # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
> > unix {
> > radwtmp = "/var/log/freeradius/radwtmp"
> > }
> > Creating attribute Unix-Group
> > # Loaded module rlm_eap
> > # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> > eap {
> > default_eap_type = "md5"
> > timer_expire = 60
> > ignore_unknown_eap_types = no
> > cisco_accounting_username_bug = no
> > max_sessions = 16384
> > }
> > # Loaded module rlm_unpack
> > # Loading module "unpack" from file
> > /etc/freeradius/3.0/mods-enabled/unpack
> > # Loaded module rlm_chap
> > # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
> > # Loading module "detail" from file
> > /etc/freeradius/3.0/mods-enabled/detail
> > detail {
> > filename =
> >
> >
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loaded module rlm_digest
> > # Loading module "digest" from file
> > /etc/freeradius/3.0/mods-enabled/digest
> > # Loaded module rlm_attr_filter
> > # Loading module "attr_filter.post-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.post-proxy {
> > filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.pre-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.pre-proxy {
> > filename =
> "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_reject" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.access_reject {
> > filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_challenge" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.access_challenge {
> > filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.accounting_response" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > attr_filter attr_filter.accounting_response {
> > filename =
> > "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > instantiate {
> > }
> > # Instantiating module "cache_eap" from file
> > /etc/freeradius/3.0/mods-enabled/cache_eap
> > rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> > loaded and linked
> > # Instantiating module "IPASS" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > # Instantiating module "suffix" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > # Instantiating module "realmpercent" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > # Instantiating module "ntdomain" from file
> > /etc/freeradius/3.0/mods-enabled/realm
> > # Instantiating module "files" from file
> > /etc/freeradius/3.0/mods-enabled/files
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> > reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> > # Instantiating module "pap" from file
> > /etc/freeradius/3.0/mods-enabled/pap
> > # Instantiating module "logintime" from file
> > /etc/freeradius/3.0/mods-enabled/logintime
> > # Instantiating module "linelog" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> > # Instantiating module "log_accounting" from file
> > /etc/freeradius/3.0/mods-enabled/linelog
> > # Instantiating module "reject" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "fail" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "ok" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "handled" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "invalid" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "userlock" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "notfound" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "noop" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "updated" from file
> > /etc/freeradius/3.0/mods-enabled/always
> > # Instantiating module "etc_passwd" from file
> > /etc/freeradius/3.0/mods-enabled/passwd
> > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> > # Instantiating module "mschap" from file
> > /etc/freeradius/3.0/mods-enabled/mschap
> > rlm_mschap (mschap): using internal authentication
> > # Instantiating module "preprocess" from file
> > /etc/freeradius/3.0/mods-enabled/preprocess
> > reading pairlist file
> /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> > reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> > # Instantiating module "auth_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> > detail output
> > # Instantiating module "reply_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > # Instantiating module "pre_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > # Instantiating module "post_proxy_log" from file
> > /etc/freeradius/3.0/mods-enabled/detail.log
> > # Instantiating module "expiration" from file
> > /etc/freeradius/3.0/mods-enabled/expiration
> > # Instantiating module "eap" from file
> > /etc/freeradius/3.0/mods-enabled/eap
> > # Linked to sub-module rlm_eap_md5
> > # Linked to sub-module rlm_eap_leap
> > # Linked to sub-module rlm_eap_gtc
> > gtc {
> > challenge = "Password: "
> > auth_type = "PAP"
> > }
> > # Linked to sub-module rlm_eap_tls
> > tls {
> > tls = "tls-common"
> > }
> > tls-config tls-common {
> > verify_depth = 0
> > ca_path = "/etc/freeradius/3.0/certs"
> > pem_file_type = yes
> > private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> > certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> > ca_file = "/etc/ssl/certs/ca-certificates.crt"
> > private_key_password = <<< secret >>>
> > dh_file = "/etc/freeradius/3.0/certs/dh"
> > fragment_size = 1024
> > include_length = yes
> > auto_chain = yes
> > check_crl = no
> > check_all_crl = no
> > cipher_list = "DEFAULT"
> > cipher_server_preference = no
> > ecdh_curve = "prime256v1"
> > tls_max_version = ""
> > tls_min_version = "1.0"
> > cache {
> > enable = no
> > lifetime = 24
> > max_entries = 255
> > }
> > verify {
> > skip_if_ocsp_ok = no
> > }
> > ocsp {
> > enable = no
> > override_cert_url = yes
> > url = "http://127.0.0.1/ocsp/"
> > use_nonce = yes
> > timeout = 0
> > softfail = no
> > }
> > }
> > # Linked to sub-module rlm_eap_ttls
> > ttls {
> > tls = "tls-common"
> > default_eap_type = "md5"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > virtual_server = "inner-tunnel"
> > include_length = yes
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_peap
> > peap {
> > tls = "tls-common"
> > default_eap_type = "mschapv2"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > proxy_tunneled_request_as_eap = yes
> > virtual_server = "inner-tunnel"
> > soh = no
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_mschapv2
> > mschapv2 {
> > with_ntdomain_hack = no
> > send_error = no
> > }
> > # Instantiating module "detail" from file
> > /etc/freeradius/3.0/mods-enabled/detail
> > # Instantiating module "attr_filter.post-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> > # Instantiating module "attr_filter.pre-proxy" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> > # Instantiating module "attr_filter.access_reject" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
> > [/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item
> > "FreeRADIUS-Response-Delay-USec" found in filter list for realm
> > "DEFAULT".
> > # Instantiating module "attr_filter.access_challenge" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> > # Instantiating module "attr_filter.accounting_response" from file
> > /etc/freeradius/3.0/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> > } # modules
> > radiusd: #### Loading Virtual Servers ####
> > server { # from file /etc/freeradius/3.0/radiusd.conf
> > } # server
> > server inner-tunnel { # from file
> > /etc/freeradius/3.0/sites-enabled/inner-tunnel
> > # Loading authenticate {...}
> > # Loading authorize {...}
> > Ignoring "sql" (see raddb/mods-available/README.rst)
> > Ignoring "ldap" (see raddb/mods-available/README.rst)
> > # Loading session {...}
> > # Loading post-proxy {...}
> > # Loading post-auth {...}
> > # Skipping contents of 'if' as it is always 'false' --
> > /etc/freeradius/3.0/sites-enabled/inner-tunnel:331
> > } # server inner-tunnel
> > server default { # from file /etc/freeradius/3.0/sites-enabled/default
> > # Loading authenticate {...}
> > # Loading authorize {...}
> > # Loading preacct {...}
> > # Loading accounting {...}
> > # Loading post-proxy {...}
> > # Loading post-auth {...}
> > } # server default
> > radiusd: #### Opening IP addresses and Ports ####
> > listen {
> > type = "auth"
> > ipaddr = 127.0.0.1
> > port = 18120
> > Failed binding to auth address 127.0.0.1 port 18120 bound to server
> > inner-tunnel: Address already in use
> > /etc/freeradius/3.0/sites-enabled/inner-tunnel[33]: Error binding to port
> > for 127.0.0.1 port 18120
> > user at user-Standard-PC-i440FX-PIIX-1996:~$
> >
> >
> > On Mon, Jan 28, 2019 at 4:32 PM Angel Elena <craem at craem.net> wrote:
> >
> > > this isn't a valid result, start manually freeradius with:
> > >
> > > # freeradius -X
> > >
> > > And copy&paste the result. (the answer is this debug)
> > >
> > >
> > >
> > >
> > >
> > > --------------------------------
> > > Ángel Elena Medina _o)
> > > craem at craem.net / \\
> > > http://blog.craem.net _(___V
> > > @craem_
> > > www.linkedin.com/in/angel-elena-medina
> > > --------------------------------
> > > Zarafa Webapp.
> > >
> > > -----Mensaje original-----
> > > De: Conroy Bosco Martins <cbm2612 at rit.edu>
> > > Enviado: Lun 28-01-2019 22:29
> > > Asunto: Can't start my server
> > > Para: freeradius-users at lists.freeradius.org;
> > > > Hello all,
> > > >
> > > > I am unable to start my radius server. It's giving me this error. It
> > was
> > > > working fine till now and I didn't make any configuration changes.
> So I
> > > > don't know why is this error coming up.
> > > >
> > > > Please can anyone help me.
> > > >
> > > > user at user-Standard-PC-i440FX-PIIX-1996:/etc/freeradius/3.0$ sudo
> > > systemctl
> > > > restart freeradius
> > > > Job for freeradius.service failed because the control process exited
> > with
> > > > error code.
> > > > See "systemctl status freeradius.service" and "journalctl -xe" for
> > > details.
> > > >
> > > > user at user-Standard-PC-i440FX-PIIX-1996:/etc/freeradius/3.0$ sudo
> > > systemctl
> > > > status freeradius
> > > >
> > > > ● freeradius.service - FreeRADIUS multi-protocol policy server
> > > > Loaded: loaded (/lib/systemd/system/freeradius.service; disabled;
> > > vendor
> > > > preset: enabled)
> > > > Active: activating (auto-restart) (Result: exit-code) since Mon
> > > > 2019-01-28 16:21:01 EST; 4s ago
> > > > Docs: man:radiusd(8)
> > > > man:radiusd.conf(5)
> > > > http://wiki.freeradius.org/
> > > > http://networkradius.com/doc/
> > > > Process: 14788 ExecStart=/usr/sbin/freeradius $FREERADIUS_OPTIONS
> > > > (code=exited, status=1/FAILURE)
> > > > Process: 14786 ExecStartPre=/usr/sbin/freeradius
> $FREERADIUS_OPTIONS
> > > -Cxm
> > > > -lstdout (code=exited, status=0/SUCCESS)
> > > > -
> > > > List info/subscribe/unsubscribe? See
> > > http://www.freeradius.org/list/users.html
> > >
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list