Radippool module don't write ippool table.

[Alan DeKok]

On Jul 11, 2019, at 10:56 PM, Wagner Bento <wagner at seanet.com.br> wrote:
> i've checking the mysql log and looks like it was updated, but when I check
> the table, I see no information.

  What does that mean?

> Freeradius Log looks like ok, no error.
> 
> Am I missing something?

  It's clear you think something is going wrong.  But you're not saying what is going wrong.

  Use more words.  Saying "stuff is wrong" is useless.  Describe WHAT is wrong.

> rad_recv: Accounting-Request packet from host 10.100.100.53 port 47842,
> id=242, length=198
>        Service-Type = Framed-User
>        Framed-Protocol = PPP
>        NAS-Port = 15728902
>        NAS-Port-Type = Ethernet
>        User-Name = "teste.huawei at itapema"
>        Calling-Station-Id = "00:0C:42:EC:99:96"
>        Called-Station-Id = "PPP_Server1"
>        NAS-Port-Id = "ether2"
>        MS-CHAP-Domain = "itapema"
>        Acct-Session-Id = "81600106"
>        Framed-IP-Address = 100.74.0.4
>        Acct-Authentic = RADIUS
>        Event-Timestamp = "Apr 10 2019 00:33:26 -03"
>        Acct-Status-Type = Start
>        NAS-Identifier = "TESTE - RADIUS"
>        Acct-Delay-Time = 0
>        Mikrotik-Realm = "itapema"
>        NAS-IP-Address = 10.100.100.53
> # Executing section preacct from file /etc/freeradius/sites-enabled/default
> +group preacct {
> ++[preprocess] = ok

  Hmm... that's v2, which is EOL.  If it works, good.  If it doesn't, we'll try to help.  But many issues will be addressed by upgrading to v3.

  Alan DeKok.