Radippool module don't write ippool table.

Wagner Bento wagner at seanet.com.br
Fri Jul 12 13:56:21 CEST 2019


 > What does that mean?

Client connect and gets IP from radippool. It was supposed to update
radippool, right? But when you check the table, you see collumns and IPs,
but no information about who got it.

>   Hmm... that's v2, which is EOL.  If it works, good.  If it doesn't,
we'll try to help.  But many issues will be addressed by upgrading to v3.

Anyway, I'll update my test server first, I'll post the results.

Thanks again.





Em sex, 12 de jul de 2019 às 03:21, Alan DeKok <aland at deployingradius.com>
escreveu:

> On Jul 11, 2019, at 10:56 PM, Wagner Bento <wagner at seanet.com.br> wrote:
> > i've checking the mysql log and looks like it was updated, but when I
> check
> > the table, I see no information.
>
>   What does that mean?
>
> > Freeradius Log looks like ok, no error.
> >
> > Am I missing something?
>
>   It's clear you think something is going wrong.  But you're not saying
> what is going wrong.
>
>   Use more words.  Saying "stuff is wrong" is useless.  Describe WHAT is
> wrong.
>
> > rad_recv: Accounting-Request packet from host 10.100.100.53 port 47842,
> > id=242, length=198
> >        Service-Type = Framed-User
> >        Framed-Protocol = PPP
> >        NAS-Port = 15728902
> >        NAS-Port-Type = Ethernet
> >        User-Name = "teste.huawei at itapema"
> >        Calling-Station-Id = "00:0C:42:EC:99:96"
> >        Called-Station-Id = "PPP_Server1"
> >        NAS-Port-Id = "ether2"
> >        MS-CHAP-Domain = "itapema"
> >        Acct-Session-Id = "81600106"
> >        Framed-IP-Address = 100.74.0.4
> >        Acct-Authentic = RADIUS
> >        Event-Timestamp = "Apr 10 2019 00:33:26 -03"
> >        Acct-Status-Type = Start
> >        NAS-Identifier = "TESTE - RADIUS"
> >        Acct-Delay-Time = 0
> >        Mikrotik-Realm = "itapema"
> >        NAS-IP-Address = 10.100.100.53
> > # Executing section preacct from file
> /etc/freeradius/sites-enabled/default
> > +group preacct {
> > ++[preprocess] = ok
>
>   Hmm... that's v2, which is EOL.  If it works, good.  If it doesn't,
> we'll try to help.  But many issues will be addressed by upgrading to v3.
>
>   Alan DeKok.
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html


More information about the Freeradius-Users mailing list