WPA Enterprise with Radius assigned VLAN from LDAP (Samba Active Directory)
Christian Uhlmann
christian at uhlmann.it
Sun Mar 17 15:06:19 CET 2019
Hello everybody,
I successfully got Freeradius running for WPA Enterprise with Samba
Active Diretory.
OS: Debian Buster
FreeRADIUS Version: 3.0.17
The /etc/freeradius/3.0/mods-available/ntlm_auth looks like this:
exec ntlm_auth {
wait = yes
program = "/usr/bin/ntlm_auth --request-nt-key --domain=HOME
--username=%{mschap:User-Name} --password=%{User-Password}"
}
Now I would also like to perform a VLAN assignment based on groups of
the user in the AD.
First my question: Is this in the post-auth over LDAP possible?
For this I have setup in the LDAP config
(/etc/freeradius/3.0/mods-available/ldap):
ldap {
server = "pdc.home.uhlmann.world"
port = 389
identity = "cn=radius-auth,cn=users,DC=home,DC=uhlmann,DC=world"
password = << secret password >>
basedn = "CN=Users,DC=home,DC=uhlmann,DC=world"
filter = "(sAMAccountName=%{%{Stripped-User-Name}:-%{User-Name}})"
tls {
start_tls = no
}
group {
base_dn = "CN=Users,DC=home,DC=uhlmann,DC=world"
name_attribute = cn
membership_filter =
"(|(member=%{control:Ldap-UserDn})(memberOf=%{%{Stripped-User-Name}:-%{User-Name}}))"
membership_attribute = 'memberOf'
}
options {
chase_referrals = no
rebind = yes
timeout = 10
timelimit = 3
net_timeout = 1
idle = 60
probes = 3
interval = 3
ldap_debug = 0x0028
}
}
In /etc/freeradius/3.0/sites-enabled/default I configured the following
in the post-auth section:
ldap
if (LDAP-Group == "wlan-gast") {
update reply {
Tunnel-type = VLAN
Tunnel-medium-type = IEEE-802
Tunnel-Private-Group-Id = 851
}
}
elsif (LDAP-Group == "wlan-kinder") {
update reply {
Tunnel-type = VLAN
Tunnel-medium-type = IEEE-802
Tunnel-Private-Group-Id = 999
}
}
else {
update reply {
Tunnel-type = VLAN
Tunnel-medium-type = IEEE-802
Tunnel-Private-Group-Id = 999
}
}
Unfortunately, the assignment to the VLAN 999 always takes place, the
following can be seen in the debug output:
(8) # Executing section post-auth from file
/etc/freeradius/3.0/sites-enabled/default
(8) post-auth {
(8) update {
(8) No attributes updated
(8) } # update = noop
(8) [ldap] = noop
(8) if (LDAP-Group == "wlan-gast") {
(8) Searching for user in group "wlan-gast"
rlm_ldap (ldap): Reserved connection (2)
(8) Performing unfiltered search in "", scope "sub"
(8) Waiting for search result...
(8) The specified DN wasn't found
(8) Search returned no results
rlm_ldap (ldap): Released connection (2)
(8) if (LDAP-Group == "wlan-gast") -> FALSE
(8) elsif (LDAP-Group == "wlan-kinder") {
(8) Searching for user in group "wlan-kinder"
rlm_ldap (ldap): Reserved connection (3)
(8) Performing unfiltered search in "", scope "sub"
(8) Waiting for search result...
(8) The specified DN wasn't found
(8) Search returned no results
rlm_ldap (ldap): Released connection (3)
(8) elsif (LDAP-Group == "wlan-kinder") -> FALSE
(8) else {
(8) update reply {
(8) Tunnel-type = VLAN
(8) Tunnel-medium-type = IEEE-802
(8) Tunnel-Private-Group-Id = 999
(8) } # update reply = noop
(8) } # else = noop
(8) [exec] = noop
(8) policy remove_reply_message_if_eap {
(8) if (&reply:EAP-Message && &reply:Reply-Message) {
(8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(8) else {
(8) [noop] = noop
(8) } # else = noop
(8) } # policy remove_reply_message_if_eap = noop
(8) } # post-auth = noop
(8) Login OK: [testgast/<via Auth-Type = eap>] (from client unifi port 0
cli 48-BF-6B-47-56-EC)
(8) Sent Access-Accept Id 156 from 192.168.127.37:1812 to
192.168.127.197:54036 length 0
(8) MS-MPPE-Recv-Key =
0xdb66ce7a4780f479ecba8643b5408656d13b0affd455c45cc0598fb495e3815f
(8) MS-MPPE-Send-Key =
0x02dd275fc9cd169117139666b81da0fb40b3e280174c546b15de84688cb91d91
(8) EAP-Message = 0x03540004
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) User-Name = "testgast"
(8) Tunnel-Type = VLAN
(8) Tunnel-Medium-Type = IEEE-802
(8) Tunnel-Private-Group-Id = "999"
(8) Finished request
(In the appendix again the complete debug.log)
As you can see, freeradius does not seem to search correctly in LDAP.
Running a mnauelles with ldapsearch (as stated here
https://github.com/FreeRADIUS/freeradius-server/blob/master/raddb/mods-available/ldap)
comes to the following result:
ldapsearch -D cn=radius-auth,cn=users,DC=home,DC=uhlmann,DC=world -w <<
secret password >> -h pdc.home.uhlmann.world -b
'CN=Users,DC=home,DC=uhlmann,DC=world'
'(&(objectClass=user)(sAMAccountName=testgast)(memberOf=CN=wlan-gast,CN=Users,DC=home,DC=uhlmann,DC=world))'
# extended LDIF
#
# LDAPv3
# base <CN=Users,DC=home,DC=uhlmann,DC=world> with scope subtree
# filter:
(&(objectClass=user)(sAMAccountName=testgast)(memberOf=CN=wlan-gast,CN=Users,DC=home,DC=uhlmann,DC=world))
# requesting: ALL
#
# testgast, Users, home.uhlmann.world
dn: CN=testgast,CN=Users,DC=home,DC=uhlmann,DC=world
objectClass: top
objectClass: person
objectClass: organizationalPerson
objectClass: user
cn: testgast
givenName: testgast
instanceType: 4
whenCreated: 20190216205554.0Z
displayName: testgast
uSNCreated: 13776
name: testgast
objectGUID:: bd40XvQpbkSeX5icQ6HMwQ==
badPwdCount: 0
codePage: 0
countryCode: 0
badPasswordTime: 0
lastLogoff: 0
lastLogon: 0
primaryGroupID: 513
objectSid:: AQUAAAAAAAUVAAAA0HcQPtkCCXK+0rCrrgUAAA==
accountExpires: 9223372036854775807
logonCount: 0
sAMAccountName: testgast
sAMAccountType: 805306368
userPrincipalName: testgast at home.uhlmann.world
objectCategory:
CN=Person,CN=Schema,CN=Configuration,DC=home,DC=uhlmann,DC=wor
ld
userAccountControl: 66048
memberOf: CN=wlan-gast,CN=Users,DC=home,DC=uhlmann,DC=world
pwdLastSet: 131971360575227260
lockoutTime: 0
lastLogonTimestamp: 131971360685327730
whenChanged: 20190315150748.0Z
uSNChanged: 14549
distinguishedName: CN=testgast,CN=Users,DC=home,DC=uhlmann,DC=world
# search result
search: 2
result: 0 Success
# numResponses: 2
# numEntries: 1
Can someone tell me if this is what I intend and possibly where my
mistake lies?
Thanks and Regards
Christian
-------------- next part --------------
FreeRADIUS Version 3.0.17
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/control
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = yes
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client unifi {
ipaddr = 192.168.127.0/24
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
ntlm_auth = "/usr/bin/ntlm_auth --allow-mschapv2 --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-HOME} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}"
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_exec
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/usr/bin/ntlm_auth --request-nt-key --domain=HOME --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
ldap {
server = "pdc.home.uhlmann.world"
port = 389
identity = "cn=radius-auth,cn=users,DC=home,DC=uhlmann,DC=world"
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberOf"
membership_filter = "(|(member=%{control:Ldap-UserDn})(memberOf=%{%{Stripped-User-Name}:-%{User-Name}}))"
cacheable_name = no
cacheable_dn = no
}
client {
scope = "sub"
base_dn = ""
}
profile {
}
options {
ldap_debug = 40
chase_referrals = no
rebind = yes
net_timeout = 1
res_timeout = 20
srv_timelimit = 20
idle = 60
probes = 3
interval = 3
}
tls {
start_tls = no
}
}
Creating attribute LDAP-Group
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
instantiate {
}
# Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
# Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/freeradius/3.0/certs/self/pdc.home.uhlmann.world_rootCA.key"
certificate_file = "/etc/freeradius/3.0/certs/self/pdc.home.uhlmann.world_rootCA.pem"
ca_file = "/etc/freeradius/3.0/certs/self/pdc.home.uhlmann.world_rootCA.pem"
dh_file = "/etc/freeradius/3.0/certs/dh"
random_file = "/dev/urandom"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20447
rlm_ldap (ldap): Couldn't find configuration for accounting, will return NOOP for calls from this section
rlm_ldap (ldap): Couldn't find configuration for post-auth, will return NOOP for calls from this section
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 5
max = 10
spare = 3
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 1
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 10 pending slots used
rlm_ldap (ldap): Connecting to ldap://pdc.home.uhlmann.world:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 9 pending slots used
rlm_ldap (ldap): Connecting to ldap://pdc.home.uhlmann.world:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 8 pending slots used
rlm_ldap (ldap): Connecting to ldap://pdc.home.uhlmann.world:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 7 pending slots used
rlm_ldap (ldap): Connecting to ldap://pdc.home.uhlmann.world:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 6 pending slots used
rlm_ldap (ldap): Connecting to ldap://pdc.home.uhlmann.world:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading preacct {...}
# Loading accounting {...}
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:347
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 50652
Listening on proxy address :: port 45462
Ready to process requests
(0) Received Access-Request Id 148 from 192.168.127.197:54036 to 192.168.127.37:1812 length 210
(0) User-Name = "testgast"
(0) NAS-Identifier = "44d9e7d6c7a3"
(0) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(0) NAS-Port-Type = Wireless-802.11
(0) Service-Type = Framed-User
(0) Calling-Station-Id = "48-BF-6B-47-56-EC"
(0) Connect-Info = "CONNECT 0Mbps 802.11b"
(0) Acct-Session-Id = "BD7837E631D1614E"
(0) WLAN-Pairwise-Cipher = 1027076
(0) WLAN-Group-Cipher = 1027076
(0) WLAN-AKM-Suite = 1027073
(0) Framed-MTU = 1400
(0) EAP-Message = 0x024c000d017465737467617374
(0) Message-Authenticator = 0x12de4b01638cf4679bc3c6619a60bbc1
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: Peer sent EAP Response (code 2) ID 76 length 13
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_peap to process data
(0) eap_peap: Initiating new EAP-TLS session
(0) eap_peap: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 77 length 6
(0) eap: EAP session adding &reply:State = 0xd95d5795d9104ec2
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 148 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(0) EAP-Message = 0x014d00061920
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0xd95d5795d9104ec258474561f8fe7f8a
(0) Finished request
Waking up in 4.9 seconds.
(1) Received Access-Request Id 149 from 192.168.127.197:54036 to 192.168.127.37:1812 length 376
(1) User-Name = "testgast"
(1) NAS-Identifier = "44d9e7d6c7a3"
(1) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(1) NAS-Port-Type = Wireless-802.11
(1) Service-Type = Framed-User
(1) Calling-Station-Id = "48-BF-6B-47-56-EC"
(1) Connect-Info = "CONNECT 0Mbps 802.11b"
(1) Acct-Session-Id = "BD7837E631D1614E"
(1) WLAN-Pairwise-Cipher = 1027076
(1) WLAN-Group-Cipher = 1027076
(1) WLAN-AKM-Suite = 1027073
(1) Framed-MTU = 1400
(1) EAP-Message = 0x024d00a119800000009716030100920100008e03035c8e53458c573a9cdffb08f6565a4a636086c9fb1fcddc37c09058f7a7465ea000002c00ffc02cc02bc024c023c00ac009c008c030c02fc028c027c014c013c012009d009c003d003c0035002f000a01000039000a00080006001700180019000b00
(1) State = 0xd95d5795d9104ec258474561f8fe7f8a
(1) Message-Authenticator = 0x22fe06374d3dc68fa31d7f27c22620b5
(1) session-state: No cached attributes
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: Peer sent EAP Response (code 2) ID 77 length 161
(1) eap: Continuing tunnel setup
(1) [eap] = ok
(1) } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Expiring EAP session with state 0xd95d5795d9104ec2
(1) eap: Finished EAP session with state 0xd95d5795d9104ec2
(1) eap: Previous EAP request found for state 0xd95d5795d9104ec2, released from the list
(1) eap: Peer sent packet with method EAP PEAP (25)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Continuing EAP-TLS
(1) eap_peap: Peer indicated complete TLS record size will be 151 bytes
(1) eap_peap: Got complete TLS record (151 bytes)
(1) eap_peap: [eaptls verify] = length included
(1) eap_peap: (other): before SSL initialization
(1) eap_peap: TLS_accept: before SSL initialization
(1) eap_peap: TLS_accept: before SSL initialization
(1) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 0092]
(1) eap_peap: TLS_accept: SSLv3/TLS read client hello
(1) eap_peap: >>> send TLS 1.2 [length 003d]
(1) eap_peap: TLS_accept: SSLv3/TLS write server hello
(1) eap_peap: >>> send TLS 1.2 [length 041e]
(1) eap_peap: TLS_accept: SSLv3/TLS write certificate
(1) eap_peap: >>> send TLS 1.2 [length 014d]
(1) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(1) eap_peap: >>> send TLS 1.2 [length 0004]
(1) eap_peap: TLS_accept: SSLv3/TLS write server done
(1) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(1) eap_peap: In SSL Handshake Phase
(1) eap_peap: In SSL Accept mode
(1) eap_peap: [eaptls process] = handled
(1) eap: Sending EAP Request (code 1) ID 78 length 1004
(1) eap: EAP session adding &reply:State = 0xd95d5795d8134ec2
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 149 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(1) EAP-Message = 0x014e03ec19c0000005c0160303003d0200003903032eb5f730296c3a579a1ea89357dd5d03a20e095094bc9c47444f574e4752440100c030000011ff01000100000b00040300010200170000160303041e0b00041a00041700041430820410308202f8a003020102020900a1f82fd286889939300d0609
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0xd95d5795d8134ec258474561f8fe7f8a
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 150 from 192.168.127.197:54036 to 192.168.127.37:1812 length 221
(2) User-Name = "testgast"
(2) NAS-Identifier = "44d9e7d6c7a3"
(2) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(2) NAS-Port-Type = Wireless-802.11
(2) Service-Type = Framed-User
(2) Calling-Station-Id = "48-BF-6B-47-56-EC"
(2) Connect-Info = "CONNECT 0Mbps 802.11b"
(2) Acct-Session-Id = "BD7837E631D1614E"
(2) WLAN-Pairwise-Cipher = 1027076
(2) WLAN-Group-Cipher = 1027076
(2) WLAN-AKM-Suite = 1027073
(2) Framed-MTU = 1400
(2) EAP-Message = 0x024e00061900
(2) State = 0xd95d5795d8134ec258474561f8fe7f8a
(2) Message-Authenticator = 0x8095942f3f35d9964c605bbb006cca3a
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) policy filter_username {
(2) if (&User-Name) {
(2) if (&User-Name) -> TRUE
(2) if (&User-Name) {
(2) if (&User-Name =~ / /) {
(2) if (&User-Name =~ / /) -> FALSE
(2) if (&User-Name =~ /@[^@]*@/ ) {
(2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(2) if (&User-Name =~ /\.\./ ) {
(2) if (&User-Name =~ /\.\./ ) -> FALSE
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(2) if (&User-Name =~ /\.$/) {
(2) if (&User-Name =~ /\.$/) -> FALSE
(2) if (&User-Name =~ /@\./) {
(2) if (&User-Name =~ /@\./) -> FALSE
(2) } # if (&User-Name) = notfound
(2) } # policy filter_username = notfound
(2) [preprocess] = ok
(2) [chap] = noop
(2) [mschap] = noop
(2) [digest] = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) eap: Peer sent EAP Response (code 2) ID 78 length 6
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0xd95d5795d8134ec2
(2) eap: Finished EAP session with state 0xd95d5795d8134ec2
(2) eap: Previous EAP request found for state 0xd95d5795d8134ec2, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer ACKed our handshake fragment
(2) eap_peap: [eaptls verify] = request
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 79 length 484
(2) eap: EAP session adding &reply:State = 0xd95d5795db124ec2
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 150 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(2) EAP-Message = 0x014f01e41900bdb792e7f461d435385ea833169db8d762bf50e207eec791dbb259c9d8c1ba6c4df24265fd9d998c2fa989c704df57315dc4e111682f5bdd4856b02ad4a1852e71ff9d5574ebdf6bcfecbcad33804117d3485bef97fb3757cc458df4df746548ee21faf9378c3f01e35e55200b52122992
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0xd95d5795db124ec258474561f8fe7f8a
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 151 from 192.168.127.197:54036 to 192.168.127.37:1812 length 351
(3) User-Name = "testgast"
(3) NAS-Identifier = "44d9e7d6c7a3"
(3) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(3) NAS-Port-Type = Wireless-802.11
(3) Service-Type = Framed-User
(3) Calling-Station-Id = "48-BF-6B-47-56-EC"
(3) Connect-Info = "CONNECT 0Mbps 802.11b"
(3) Acct-Session-Id = "BD7837E631D1614E"
(3) WLAN-Pairwise-Cipher = 1027076
(3) WLAN-Group-Cipher = 1027076
(3) WLAN-AKM-Suite = 1027073
(3) Framed-MTU = 1400
(3) EAP-Message = 0x024f008819800000007e160303004610000042410465ec9ce0d801e33fae2b6483154bac60e29ea94cddc2068ab987301d8da2a427da5ee4b23971d4ccfcfcb7fc8b58c1ab9cf005a5595a91bd1b95770ad8d968e71403030001011603030028d7c6bb8aea55ca26795b73946e18d88b32be77d5c613f0
(3) State = 0xd95d5795db124ec258474561f8fe7f8a
(3) Message-Authenticator = 0x82727a19f4f5758ea4ec234d59d100f8
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) policy filter_username {
(3) if (&User-Name) {
(3) if (&User-Name) -> TRUE
(3) if (&User-Name) {
(3) if (&User-Name =~ / /) {
(3) if (&User-Name =~ / /) -> FALSE
(3) if (&User-Name =~ /@[^@]*@/ ) {
(3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(3) if (&User-Name =~ /\.\./ ) {
(3) if (&User-Name =~ /\.\./ ) -> FALSE
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(3) if (&User-Name =~ /\.$/) {
(3) if (&User-Name =~ /\.$/) -> FALSE
(3) if (&User-Name =~ /@\./) {
(3) if (&User-Name =~ /@\./) -> FALSE
(3) } # if (&User-Name) = notfound
(3) } # policy filter_username = notfound
(3) [preprocess] = ok
(3) [chap] = noop
(3) [mschap] = noop
(3) [digest] = noop
(3) suffix: Checking for suffix after "@"
(3) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(3) suffix: No such realm "NULL"
(3) [suffix] = noop
(3) eap: Peer sent EAP Response (code 2) ID 79 length 136
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0xd95d5795db124ec2
(3) eap: Finished EAP session with state 0xd95d5795db124ec2
(3) eap: Previous EAP request found for state 0xd95d5795db124ec2, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(3) eap_peap: Got complete TLS record (126 bytes)
(3) eap_peap: [eaptls verify] = length included
(3) eap_peap: TLS_accept: SSLv3/TLS write server done
(3) eap_peap: <<< recv TLS 1.2 [length 0046]
(3) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(3) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(3) eap_peap: <<< recv TLS 1.2 [length 0010]
(3) eap_peap: TLS_accept: SSLv3/TLS read finished
(3) eap_peap: >>> send TLS 1.2 [length 0001]
(3) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(3) eap_peap: >>> send TLS 1.2 [length 0010]
(3) eap_peap: TLS_accept: SSLv3/TLS write finished
(3) eap_peap: (other): SSL negotiation finished successfully
(3) eap_peap: SSL Connection Established
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 80 length 57
(3) eap: EAP session adding &reply:State = 0xd95d5795da0d4ec2
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 151 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(3) EAP-Message = 0x015000391900140303000101160303002854105cf234f651df55cb9e59e808a381ecde1d6e3d4f25238fd772a1727a6dbb98f2796d6ecd8f6e
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0xd95d5795da0d4ec258474561f8fe7f8a
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 152 from 192.168.127.197:54036 to 192.168.127.37:1812 length 221
(4) User-Name = "testgast"
(4) NAS-Identifier = "44d9e7d6c7a3"
(4) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(4) NAS-Port-Type = Wireless-802.11
(4) Service-Type = Framed-User
(4) Calling-Station-Id = "48-BF-6B-47-56-EC"
(4) Connect-Info = "CONNECT 0Mbps 802.11b"
(4) Acct-Session-Id = "BD7837E631D1614E"
(4) WLAN-Pairwise-Cipher = 1027076
(4) WLAN-Group-Cipher = 1027076
(4) WLAN-AKM-Suite = 1027073
(4) Framed-MTU = 1400
(4) EAP-Message = 0x025000061900
(4) State = 0xd95d5795da0d4ec258474561f8fe7f8a
(4) Message-Authenticator = 0xa86469667b3fd388916c3bb7f1a32911
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) policy filter_username {
(4) if (&User-Name) {
(4) if (&User-Name) -> TRUE
(4) if (&User-Name) {
(4) if (&User-Name =~ / /) {
(4) if (&User-Name =~ / /) -> FALSE
(4) if (&User-Name =~ /@[^@]*@/ ) {
(4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(4) if (&User-Name =~ /\.\./ ) {
(4) if (&User-Name =~ /\.\./ ) -> FALSE
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(4) if (&User-Name =~ /\.$/) {
(4) if (&User-Name =~ /\.$/) -> FALSE
(4) if (&User-Name =~ /@\./) {
(4) if (&User-Name =~ /@\./) -> FALSE
(4) } # if (&User-Name) = notfound
(4) } # policy filter_username = notfound
(4) [preprocess] = ok
(4) [chap] = noop
(4) [mschap] = noop
(4) [digest] = noop
(4) suffix: Checking for suffix after "@"
(4) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(4) suffix: No such realm "NULL"
(4) [suffix] = noop
(4) eap: Peer sent EAP Response (code 2) ID 80 length 6
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0xd95d5795da0d4ec2
(4) eap: Finished EAP session with state 0xd95d5795da0d4ec2
(4) eap: Previous EAP request found for state 0xd95d5795da0d4ec2, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(4) eap_peap: [eaptls verify] = success
(4) eap_peap: [eaptls process] = success
(4) eap_peap: Session established. Decoding tunneled attributes
(4) eap_peap: PEAP state TUNNEL ESTABLISHED
(4) eap: Sending EAP Request (code 1) ID 81 length 40
(4) eap: EAP session adding &reply:State = 0xd95d5795dd0c4ec2
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 152 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(4) EAP-Message = 0x015100281900170303001d54105cf234f651e064e524ec21d493d2b1c2579693513bd766fa403cc3
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0xd95d5795dd0c4ec258474561f8fe7f8a
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 153 from 192.168.127.197:54036 to 192.168.127.37:1812 length 259
(5) User-Name = "testgast"
(5) NAS-Identifier = "44d9e7d6c7a3"
(5) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(5) NAS-Port-Type = Wireless-802.11
(5) Service-Type = Framed-User
(5) Calling-Station-Id = "48-BF-6B-47-56-EC"
(5) Connect-Info = "CONNECT 0Mbps 802.11b"
(5) Acct-Session-Id = "BD7837E631D1614E"
(5) WLAN-Pairwise-Cipher = 1027076
(5) WLAN-Group-Cipher = 1027076
(5) WLAN-AKM-Suite = 1027073
(5) Framed-MTU = 1400
(5) EAP-Message = 0x0251002c19001703030021d7c6bb8aea55ca276be8bf85e7109775fb2672db77505c4d1a2a877f1f237db5c9
(5) State = 0xd95d5795dd0c4ec258474561f8fe7f8a
(5) Message-Authenticator = 0x13bb86582c9f8364d2cf7e9db0de3709
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [preprocess] = ok
(5) [chap] = noop
(5) [mschap] = noop
(5) [digest] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) eap: Peer sent EAP Response (code 2) ID 81 length 44
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0xd95d5795dd0c4ec2
(5) eap: Finished EAP session with state 0xd95d5795dd0c4ec2
(5) eap: Previous EAP request found for state 0xd95d5795dd0c4ec2, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: [eaptls verify] = ok
(5) eap_peap: Done initial handshake
(5) eap_peap: [eaptls process] = ok
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(5) eap_peap: Identity - testgast
(5) eap_peap: Got inner identity 'testgast'
(5) eap_peap: Setting default EAP type for tunneled EAP session
(5) eap_peap: Got tunneled request
(5) eap_peap: EAP-Message = 0x0251000d017465737467617374
(5) eap_peap: Setting User-Name to testgast
(5) eap_peap: Sending tunneled request to inner-tunnel
(5) eap_peap: EAP-Message = 0x0251000d017465737467617374
(5) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(5) eap_peap: User-Name = "testgast"
(5) Virtual server inner-tunnel received request
(5) EAP-Message = 0x0251000d017465737467617374
(5) FreeRADIUS-Proxied-To = 127.0.0.1
(5) User-Name = "testgast"
(5) WARNING: Outer and inner identities are the same. User privacy is compromised.
(5) server inner-tunnel {
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(5) authorize {
(5) policy filter_username {
(5) if (&User-Name) {
(5) if (&User-Name) -> TRUE
(5) if (&User-Name) {
(5) if (&User-Name =~ / /) {
(5) if (&User-Name =~ / /) -> FALSE
(5) if (&User-Name =~ /@[^@]*@/ ) {
(5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(5) if (&User-Name =~ /\.\./ ) {
(5) if (&User-Name =~ /\.\./ ) -> FALSE
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(5) if (&User-Name =~ /\.$/) {
(5) if (&User-Name =~ /\.$/) -> FALSE
(5) if (&User-Name =~ /@\./) {
(5) if (&User-Name =~ /@\./) -> FALSE
(5) } # if (&User-Name) = notfound
(5) } # policy filter_username = notfound
(5) [chap] = noop
(5) [mschap] = noop
(5) suffix: Checking for suffix after "@"
(5) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(5) suffix: No such realm "NULL"
(5) [suffix] = noop
(5) update control {
(5) &Proxy-To-Realm := LOCAL
(5) } # update control = noop
(5) eap: Peer sent EAP Response (code 2) ID 81 length 13
(5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(5) [eap] = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(5) authenticate {
(5) eap: Peer sent packet with method EAP Identity (1)
(5) eap: Calling submodule eap_mschapv2 to process data
(5) eap_mschapv2: Issuing Challenge
(5) eap: Sending EAP Request (code 1) ID 82 length 43
(5) eap: EAP session adding &reply:State = 0x5d6839c85d3a238a
(5) [eap] = handled
(5) } # authenticate = handled
(5) } # server inner-tunnel
(5) Virtual server sending reply
(5) EAP-Message = 0x0152002b1a0152002610eaf1ad713ec4802f95912b8edffa61fa667265657261646975732d332e302e3137
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x5d6839c85d3a238abb369b9189d66142
(5) eap_peap: Got tunneled reply code 11
(5) eap_peap: EAP-Message = 0x0152002b1a0152002610eaf1ad713ec4802f95912b8edffa61fa667265657261646975732d332e302e3137
(5) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(5) eap_peap: State = 0x5d6839c85d3a238abb369b9189d66142
(5) eap_peap: Got tunneled reply RADIUS code 11
(5) eap_peap: EAP-Message = 0x0152002b1a0152002610eaf1ad713ec4802f95912b8edffa61fa667265657261646975732d332e302e3137
(5) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(5) eap_peap: State = 0x5d6839c85d3a238abb369b9189d66142
(5) eap_peap: Got tunneled Access-Challenge
(5) eap: Sending EAP Request (code 1) ID 82 length 74
(5) eap: EAP session adding &reply:State = 0xd95d5795dc0f4ec2
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 153 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(5) EAP-Message = 0x0152004a1900170303003f54105cf234f651e14e74f13b0b7e96f7d7587c55a1d412c34935e953fd371cee7d61b5bf5ada734ed0735520d6c42f3d764003dbc8d407b14c40cd53166e3b
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0xd95d5795dc0f4ec258474561f8fe7f8a
(5) Finished request
Waking up in 4.9 seconds.
(6) Received Access-Request Id 154 from 192.168.127.197:54036 to 192.168.127.37:1812 length 313
(6) User-Name = "testgast"
(6) NAS-Identifier = "44d9e7d6c7a3"
(6) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(6) NAS-Port-Type = Wireless-802.11
(6) Service-Type = Framed-User
(6) Calling-Station-Id = "48-BF-6B-47-56-EC"
(6) Connect-Info = "CONNECT 0Mbps 802.11b"
(6) Acct-Session-Id = "BD7837E631D1614E"
(6) WLAN-Pairwise-Cipher = 1027076
(6) WLAN-Group-Cipher = 1027076
(6) WLAN-AKM-Suite = 1027073
(6) Framed-MTU = 1400
(6) EAP-Message = 0x0252006219001703030057d7c6bb8aea55ca2809cf0b7a72f950696db83ebfa53b6ce8dae1a130442f04b2716cc851abb8a9d03dc488c212f4c37b6ef77532a98e5c05e4dc62f2459f0df1ea58ad3d9c529f4973990586ec863983412fb503d62d11
(6) State = 0xd95d5795dc0f4ec258474561f8fe7f8a
(6) Message-Authenticator = 0xbd17eb7bca5dc5d07602d3c4e0ef7697
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [preprocess] = ok
(6) [chap] = noop
(6) [mschap] = noop
(6) [digest] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) eap: Peer sent EAP Response (code 2) ID 82 length 98
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x5d6839c85d3a238a
(6) eap: Finished EAP session with state 0xd95d5795dc0f4ec2
(6) eap: Previous EAP request found for state 0xd95d5795dc0f4ec2, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state phase2
(6) eap_peap: EAP method MSCHAPv2 (26)
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message = 0x025200431a0252003e31a27ebd95d008da58b8c851c2b1e0b80d00000000000000002b5646cea907e747bc4b48e60b315455e77d9fb37a0fda40007465737467617374
(6) eap_peap: Setting User-Name to testgast
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap: EAP-Message = 0x025200431a0252003e31a27ebd95d008da58b8c851c2b1e0b80d00000000000000002b5646cea907e747bc4b48e60b315455e77d9fb37a0fda40007465737467617374
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "testgast"
(6) eap_peap: State = 0x5d6839c85d3a238abb369b9189d66142
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x025200431a0252003e31a27ebd95d008da58b8c851c2b1e0b80d00000000000000002b5646cea907e747bc4b48e60b315455e77d9fb37a0fda40007465737467617374
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "testgast"
(6) State = 0x5d6839c85d3a238abb369b9189d66142
(6) WARNING: Outer and inner identities are the same. User privacy is compromised.
(6) server inner-tunnel {
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authorize {
(6) policy filter_username {
(6) if (&User-Name) {
(6) if (&User-Name) -> TRUE
(6) if (&User-Name) {
(6) if (&User-Name =~ / /) {
(6) if (&User-Name =~ / /) -> FALSE
(6) if (&User-Name =~ /@[^@]*@/ ) {
(6) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(6) if (&User-Name =~ /\.\./ ) {
(6) if (&User-Name =~ /\.\./ ) -> FALSE
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(6) if (&User-Name =~ /\.$/) {
(6) if (&User-Name =~ /\.$/) -> FALSE
(6) if (&User-Name =~ /@\./) {
(6) if (&User-Name =~ /@\./) -> FALSE
(6) } # if (&User-Name) = notfound
(6) } # policy filter_username = notfound
(6) [chap] = noop
(6) [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(6) suffix: No such realm "NULL"
(6) [suffix] = noop
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 82 length 67
(6) eap: No EAP Start, assuming it's an on-going EAP conversation
(6) [eap] = updated
(6) [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(6) ldap: Performing unfiltered search in "", scope "sub"
(6) ldap: Waiting for search result...
(6) ldap: The specified DN wasn't found
(6) ldap: Search returned no results
rlm_ldap (ldap): Released connection (0)
(6) [ldap] = notfound
(6) [expiration] = noop
(6) [logintime] = noop
(6) [pap] = noop
(6) } # authorize = updated
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authenticate {
(6) eap: Expiring EAP session with state 0x5d6839c85d3a238a
(6) eap: Finished EAP session with state 0x5d6839c85d3a238a
(6) eap: Previous EAP request found for state 0x5d6839c85d3a238a, released from the list
(6) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) eap_mschapv2: authenticate {
(6) mschap: Creating challenge hash with username: testgast
(6) mschap: Client is using MS-CHAPv2
(6) mschap: Executing: /usr/bin/ntlm_auth --allow-mschapv2 --request-nt-key --username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-HOME} --challenge=%{mschap:Challenge:-00} --nt-response=%{mschap:NT-Response:-00}:
(6) mschap: EXPAND --username=%{mschap:User-Name:-None}
(6) mschap: --> --username=testgast
(6) mschap: ERROR: No NT-Domain was found in the User-Name
(6) mschap: EXPAND --domain=%{%{mschap:NT-Domain}:-HOME}
(6) mschap: --> --domain=HOME
(6) mschap: Creating challenge hash with username: testgast
(6) mschap: EXPAND --challenge=%{mschap:Challenge:-00}
(6) mschap: --> --challenge=75c47d29a6669c86
(6) mschap: EXPAND --nt-response=%{mschap:NT-Response:-00}
(6) mschap: --> --nt-response=2b5646cea907e747bc4b48e60b315455e77d9fb37a0fda40
(6) mschap: Program returned code (0) and output 'NT_KEY: 4030BEDB8B0EB827396577D0D3B1E108'
(6) mschap: Adding MS-CHAPv2 MPPE keys
(6) [mschap] = ok
(6) } # authenticate = ok
(6) MSCHAP Success
(6) eap: Sending EAP Request (code 1) ID 83 length 51
(6) eap: EAP session adding &reply:State = 0x5d6839c85c3b238a
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message = 0x015300331a0352002e533d44363742433642353841314335453436414336353033334533334645453437334344313331354233
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x5d6839c85c3b238abb369b9189d66142
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap: EAP-Message = 0x015300331a0352002e533d44363742433642353841314335453436414336353033334533334645453437334344313331354233
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0x5d6839c85c3b238abb369b9189d66142
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap: EAP-Message = 0x015300331a0352002e533d44363742433642353841314335453436414336353033334533334645453437334344313331354233
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0x5d6839c85c3b238abb369b9189d66142
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 83 length 82
(6) eap: EAP session adding &reply:State = 0xd95d5795df0e4ec2
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 154 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(6) EAP-Message = 0x015300521900170303004754105cf234f651e21acce4f2366ba595b6c9f6a6f0645466d1ad74701bf9b78f48fa789df82281ac7e78e75be0cb98ba913978c4857ceae9ead1918b0092edf55c057504975fe6
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xd95d5795df0e4ec258474561f8fe7f8a
(6) Finished request
Waking up in 4.8 seconds.
(7) Received Access-Request Id 155 from 192.168.127.197:54036 to 192.168.127.37:1812 length 252
(7) User-Name = "testgast"
(7) NAS-Identifier = "44d9e7d6c7a3"
(7) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(7) NAS-Port-Type = Wireless-802.11
(7) Service-Type = Framed-User
(7) Calling-Station-Id = "48-BF-6B-47-56-EC"
(7) Connect-Info = "CONNECT 0Mbps 802.11b"
(7) Acct-Session-Id = "BD7837E631D1614E"
(7) WLAN-Pairwise-Cipher = 1027076
(7) WLAN-Group-Cipher = 1027076
(7) WLAN-AKM-Suite = 1027073
(7) Framed-MTU = 1400
(7) EAP-Message = 0x025300251900170303001ad7c6bb8aea55ca295db3b027a638943733918a3ee85e12478114
(7) State = 0xd95d5795df0e4ec258474561f8fe7f8a
(7) Message-Authenticator = 0xee9e6668623e147dac0b803013b9e786
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [preprocess] = ok
(7) [chap] = noop
(7) [mschap] = noop
(7) [digest] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) eap: Peer sent EAP Response (code 2) ID 83 length 37
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x5d6839c85c3b238a
(7) eap: Finished EAP session with state 0xd95d5795df0e4ec2
(7) eap: Previous EAP request found for state 0xd95d5795df0e4ec2, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message = 0x025300061a03
(7) eap_peap: Setting User-Name to testgast
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message = 0x025300061a03
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "testgast"
(7) eap_peap: State = 0x5d6839c85c3b238abb369b9189d66142
(7) Virtual server inner-tunnel received request
(7) EAP-Message = 0x025300061a03
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "testgast"
(7) State = 0x5d6839c85c3b238abb369b9189d66142
(7) WARNING: Outer and inner identities are the same. User privacy is compromised.
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authorize {
(7) policy filter_username {
(7) if (&User-Name) {
(7) if (&User-Name) -> TRUE
(7) if (&User-Name) {
(7) if (&User-Name =~ / /) {
(7) if (&User-Name =~ / /) -> FALSE
(7) if (&User-Name =~ /@[^@]*@/ ) {
(7) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(7) if (&User-Name =~ /\.\./ ) {
(7) if (&User-Name =~ /\.\./ ) -> FALSE
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(7) if (&User-Name =~ /\.$/) {
(7) if (&User-Name =~ /\.$/) -> FALSE
(7) if (&User-Name =~ /@\./) {
(7) if (&User-Name =~ /@\./) -> FALSE
(7) } # if (&User-Name) = notfound
(7) } # policy filter_username = notfound
(7) [chap] = noop
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(7) suffix: No such realm "NULL"
(7) [suffix] = noop
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 83 length 6
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
rlm_ldap (ldap): Reserved connection (1)
(7) ldap: Performing unfiltered search in "", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: The specified DN wasn't found
(7) ldap: Search returned no results
rlm_ldap (ldap): Released connection (1)
(7) [ldap] = notfound
(7) [expiration] = noop
(7) [logintime] = noop
(7) [pap] = noop
(7) } # authorize = updated
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authenticate {
(7) eap: Expiring EAP session with state 0x5d6839c85c3b238a
(7) eap: Finished EAP session with state 0x5d6839c85c3b238a
(7) eap: Previous EAP request found for state 0x5d6839c85c3b238a, released from the list
(7) eap: Peer sent packet with method EAP MSCHAPv2 (26)
(7) eap: Calling submodule eap_mschapv2 to process data
(7) eap: Sending EAP Success (code 3) ID 83 length 4
(7) eap: Freeing handler
(7) [eap] = ok
(7) } # authenticate = ok
(7) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) post-auth {
(7) [ldap] = noop
(7) if (0) {
(7) if (0) -> FALSE
(7) } # post-auth = noop
(7) Login OK: [testgast/<via Auth-Type = eap>] (from client unifi port 0 via TLS tunnel)
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) MS-MPPE-Encryption-Policy = Encryption-Allowed
(7) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(7) MS-MPPE-Send-Key = 0x2f19e4cb8a6c2e0f60758d178ee5280d
(7) MS-MPPE-Recv-Key = 0xd47d8cd62e2e2adc9bcf5cb8e6d18c59
(7) EAP-Message = 0x03530004
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) User-Name = "testgast"
(7) eap_peap: Got tunneled reply code 2
(7) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed
(7) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(7) eap_peap: MS-MPPE-Send-Key = 0x2f19e4cb8a6c2e0f60758d178ee5280d
(7) eap_peap: MS-MPPE-Recv-Key = 0xd47d8cd62e2e2adc9bcf5cb8e6d18c59
(7) eap_peap: EAP-Message = 0x03530004
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: User-Name = "testgast"
(7) eap_peap: Got tunneled reply RADIUS code 2
(7) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed
(7) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed
(7) eap_peap: MS-MPPE-Send-Key = 0x2f19e4cb8a6c2e0f60758d178ee5280d
(7) eap_peap: MS-MPPE-Recv-Key = 0xd47d8cd62e2e2adc9bcf5cb8e6d18c59
(7) eap_peap: EAP-Message = 0x03530004
(7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(7) eap_peap: User-Name = "testgast"
(7) eap_peap: Tunneled authentication was successful
(7) eap_peap: SUCCESS
(7) eap: Sending EAP Request (code 1) ID 84 length 46
(7) eap: EAP session adding &reply:State = 0xd95d5795de094ec2
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) Sent Access-Challenge Id 155 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(7) EAP-Message = 0x0154002e1900170303002354105cf234f651e3ee256cf2b138e81c79b00f145e69db9c56ba6d756d53ae825cef96
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0xd95d5795de094ec258474561f8fe7f8a
(7) Finished request
Waking up in 4.8 seconds.
(8) Received Access-Request Id 156 from 192.168.127.197:54036 to 192.168.127.37:1812 length 261
(8) User-Name = "testgast"
(8) NAS-Identifier = "44d9e7d6c7a3"
(8) Called-Station-Id = "56-D9-E7-D7-C7-A3:TestUhlmannIntern"
(8) NAS-Port-Type = Wireless-802.11
(8) Service-Type = Framed-User
(8) Calling-Station-Id = "48-BF-6B-47-56-EC"
(8) Connect-Info = "CONNECT 0Mbps 802.11b"
(8) Acct-Session-Id = "BD7837E631D1614E"
(8) WLAN-Pairwise-Cipher = 1027076
(8) WLAN-Group-Cipher = 1027076
(8) WLAN-AKM-Suite = 1027073
(8) Framed-MTU = 1400
(8) EAP-Message = 0x0254002e19001703030023d7c6bb8aea55ca2a0c2504a77320af4b9e351a4c827fba2c1acab505286100d18295f5
(8) State = 0xd95d5795de094ec258474561f8fe7f8a
(8) Message-Authenticator = 0xccc70a0b669dc2cb39cb294fcb0c738a
(8) session-state: No cached attributes
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(8) authorize {
(8) policy filter_username {
(8) if (&User-Name) {
(8) if (&User-Name) -> TRUE
(8) if (&User-Name) {
(8) if (&User-Name =~ / /) {
(8) if (&User-Name =~ / /) -> FALSE
(8) if (&User-Name =~ /@[^@]*@/ ) {
(8) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(8) if (&User-Name =~ /\.\./ ) {
(8) if (&User-Name =~ /\.\./ ) -> FALSE
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE
(8) if (&User-Name =~ /\.$/) {
(8) if (&User-Name =~ /\.$/) -> FALSE
(8) if (&User-Name =~ /@\./) {
(8) if (&User-Name =~ /@\./) -> FALSE
(8) } # if (&User-Name) = notfound
(8) } # policy filter_username = notfound
(8) [preprocess] = ok
(8) [chap] = noop
(8) [mschap] = noop
(8) [digest] = noop
(8) suffix: Checking for suffix after "@"
(8) suffix: No '@' in User-Name = "testgast", looking up realm NULL
(8) suffix: No such realm "NULL"
(8) [suffix] = noop
(8) eap: Peer sent EAP Response (code 2) ID 84 length 46
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0xd95d5795de094ec2
(8) eap: Finished EAP session with state 0xd95d5795de094ec2
(8) eap: Previous EAP request found for state 0xd95d5795de094ec2, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state send tlv success
(8) eap_peap: Received EAP-TLV response
(8) eap_peap: Success
(8) eap: Sending EAP Success (code 3) ID 84 length 4
(8) eap: Freeing handler
(8) [eap] = ok
(8) } # authenticate = ok
(8) # Executing section post-auth from file /etc/freeradius/3.0/sites-enabled/default
(8) post-auth {
(8) update {
(8) No attributes updated
(8) } # update = noop
(8) [ldap] = noop
(8) if (LDAP-Group == "wlan-gast") {
(8) Searching for user in group "wlan-gast"
rlm_ldap (ldap): Reserved connection (2)
(8) Performing unfiltered search in "", scope "sub"
(8) Waiting for search result...
(8) The specified DN wasn't found
(8) Search returned no results
rlm_ldap (ldap): Released connection (2)
(8) if (LDAP-Group == "wlan-gast") -> FALSE
(8) elsif (LDAP-Group == "wlan-kinder") {
(8) Searching for user in group "wlan-kinder"
rlm_ldap (ldap): Reserved connection (3)
(8) Performing unfiltered search in "", scope "sub"
(8) Waiting for search result...
(8) The specified DN wasn't found
(8) Search returned no results
rlm_ldap (ldap): Released connection (3)
(8) elsif (LDAP-Group == "wlan-kinder") -> FALSE
(8) else {
(8) update reply {
(8) Tunnel-type = VLAN
(8) Tunnel-medium-type = IEEE-802
(8) Tunnel-Private-Group-Id = 999
(8) } # update reply = noop
(8) } # else = noop
(8) [exec] = noop
(8) policy remove_reply_message_if_eap {
(8) if (&reply:EAP-Message && &reply:Reply-Message) {
(8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(8) else {
(8) [noop] = noop
(8) } # else = noop
(8) } # policy remove_reply_message_if_eap = noop
(8) } # post-auth = noop
(8) Login OK: [testgast/<via Auth-Type = eap>] (from client unifi port 0 cli 48-BF-6B-47-56-EC)
(8) Sent Access-Accept Id 156 from 192.168.127.37:1812 to 192.168.127.197:54036 length 0
(8) MS-MPPE-Recv-Key = 0xdb66ce7a4780f479ecba8643b5408656d13b0affd455c45cc0598fb495e3815f
(8) MS-MPPE-Send-Key = 0x02dd275fc9cd169117139666b81da0fb40b3e280174c546b15de84688cb91d91
(8) EAP-Message = 0x03540004
(8) Message-Authenticator = 0x00000000000000000000000000000000
(8) User-Name = "testgast"
(8) Tunnel-Type = VLAN
(8) Tunnel-Medium-Type = IEEE-802
(8) Tunnel-Private-Group-Id = "999"
(8) Finished request
Waking up in 4.8 seconds.
(0) Cleaning up request packet ID 148 with timestamp +4
(1) Cleaning up request packet ID 149 with timestamp +4
(2) Cleaning up request packet ID 150 with timestamp +4
(3) Cleaning up request packet ID 151 with timestamp +4
(4) Cleaning up request packet ID 152 with timestamp +4
(5) Cleaning up request packet ID 153 with timestamp +4
(6) Cleaning up request packet ID 154 with timestamp +4
(7) Cleaning up request packet ID 155 with timestamp +4
(8) Cleaning up request packet ID 156 with timestamp +4
Ready to process requests
More information about the Freeradius-Users
mailing list