Systemctl start issue on Freeradius 3.0.19

Giuseppe Russo giuseppe.russo at mediacommunications.it
Thu May 2 21:19:48 CEST 2019


Hello Jorge,
there is no output:

[root at radius ~]# strings /usr/local/sbin/radiusd | grep "READY=1"
[root at radius ~]#



> Il giorno 2 mag 2019, alle ore 21:11, Jorge Pereira <jpereira at freeradius.org> ha scritto:
> 
> Giuseppe,
> 
> Please can you copy/paste the output of the command:
> 
> strings /usr/local/sbin/radiusd | grep "READY=1"
> 
> 
> On Thu, May 2, 2019 at 3:10 PM Giuseppe Russo <
> giuseppe.russo at mediacommunications.it> wrote:
> 
>> Hello,
>> I installed Freeradius 3.0.19 on centos 7.
>> Everything is working properly but if I start the service with systemctl
>> start radius the service remain in “activating” status:
>> 
>> radiusd.service - FreeRADIUS multi-protocol policy server
>>   Loaded: loaded (/usr/lib/systemd/system/radiusd.service; enabled;
>> vendor preset: disabled)
>>   Active: activating (start) since Thu 2019-05-02 19:52:38 CEST; 31s ago
>>     Docs: man:radiusd(8)
>>           man:radiusd.conf(5)
>>           http://wiki.freeradius.org/
>>           http://networkradius.com/doc/
>>  Process: 6786 ExecStartPre=/bin/chown -R root /usr/local/var/run/radiusd
>> (code=exited, status=0/SUCCESS)
>>  Process: 6784 ExecStartPre=/usr/local/sbin/radiusd $FREERADIUS_OPTIONS
>> -Cx -lstdout (code=exited, status=0/SUCCESS)
>> Main PID: 6792 (radiusd)
>>   Memory: 8.5M (limit: 2.0G)
>>   CGroup: /system.slice/radiusd.service
>>           └─6792 /usr/local/sbin/radiusd
>> 
>> 
>> This is the content of the radiusd.service file:
>> 
>> [Unit]
>> Description=FreeRADIUS multi-protocol policy server
>> After=network-online.target
>> Documentation=man:radiusd(8) man:radiusd.conf(5)
>> http://wiki.freeradius.org/ http://networkradius.com/doc/
>> 
>> [Service]
>> Type=notify
>> WatchdogSec=60
>> NotifyAccess=all
>> PIDFile=/usr/local/var/run/radiusd/radiusd.pid
>> EnvironmentFile=-/etc/sysconfig/radiusd
>> 
>> # FreeRADIUS can do static evaluation of policy language rules based
>> # on environmental variables which is very useful for doing per-host
>> # customization.
>> # Unfortunately systemd does not allow variable substitutions such
>> # as %H or $(hostname) in the EnvironmentFile.
>> # We provide HOSTNAME here for convenience.
>> Environment=HOSTNAME=%H
>> 
>> # Limit memory to 2G this is fine for %99.99 of deployments.  FreeRADIUS
>> # is not memory hungry, if it's using more than this, then there's probably
>> # a leak somewhere.
>> MemoryLimit=2G
>> 
>> RuntimeDirectory=radiusd
>> RuntimeDirectoryMode=0775
>> ExecStartPre=/usr/local/sbin/radiusd $FREERADIUS_OPTIONS -Cx -lstdout
>> ExecStartPre=-/bin/chown -R root /usr/local/var/run/radiusd
>> ExecStart=/usr/local/sbin/radiusd $FREERADIUS_OPTIONS
>> Restart=on-failure
>> RestartSec=5
>> 
>> [Install]
>> WantedBy=multi-user.target
>> 
>> Can you tell me how to solve this problem?
>> 
>> Thank you
>> 
>> Giuseppe
>> 
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

-------------- next part --------------
A non-text attachment was scrubbed...
Name: smime.p7s
Type: application/pkcs7-signature
Size: 3811 bytes
Desc: not available
URL: <http://lists.freeradius.org/pipermail/freeradius-users/attachments/20190502/d1653ae8/attachment.bin>


More information about the Freeradius-Users mailing list