Variable passing question between modules
Adam Taylor
ataylor at ulm.edu
Fri Nov 1 17:19:10 CET 2019
DEBUG LOG ATTACHED:
freeradius -X
FreeRADIUS Version 3.0.16
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/3.0/dictionary
including configuration file /etc/freeradius/3.0/radiusd.conf
including configuration file /etc/freeradius/3.0/proxy.conf
including configuration file /etc/freeradius/3.0/clients.conf
including files in directory /etc/freeradius/3.0/mods-enabled/
including configuration file /etc/freeradius/3.0/mods-enabled/files
including configuration file /etc/freeradius/3.0/mods-enabled/exec
including configuration file /etc/freeradius/3.0/mods-enabled/digest
including configuration file /etc/freeradius/3.0/mods-enabled/replicate
including configuration file /etc/freeradius/3.0/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/3.0/mods-enabled/unpack
including configuration file /etc/freeradius/3.0/mods-enabled/eap
including configuration file /etc/freeradius/3.0/mods-enabled/logintime
including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
including configuration file /etc/freeradius/3.0/mods-enabled/realm
including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
including configuration file /etc/freeradius/3.0/mods-enabled/chap
including configuration file /etc/freeradius/3.0/mods-enabled/always
including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/3.0/mods-enabled/unix
including configuration file /etc/freeradius/3.0/mods-enabled/echo
including configuration file /etc/freeradius/3.0/mods-enabled/soh
including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
including configuration file /etc/freeradius/3.0/mods-enabled/passwd
including configuration file /etc/freeradius/3.0/mods-enabled/pap
including configuration file /etc/freeradius/3.0/mods-enabled/expr
including configuration file /etc/freeradius/3.0/mods-enabled/utf8
including configuration file /etc/freeradius/3.0/mods-enabled/mschap
including configuration file /etc/freeradius/3.0/mods-enabled/ldap
including configuration file /etc/freeradius/3.0/mods-enabled/expiration
including configuration file /etc/freeradius/3.0/mods-enabled/detail
including configuration file /etc/freeradius/3.0/mods-enabled/linelog
including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
including files in directory /etc/freeradius/3.0/policy.d/
including configuration file /etc/freeradius/3.0/policy.d/cui
including configuration file /etc/freeradius/3.0/policy.d/accounting
including configuration file /etc/freeradius/3.0/policy.d/debug
including configuration file /etc/freeradius/3.0/policy.d/eap
including configuration file /etc/freeradius/3.0/policy.d/canonicalization
including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
including configuration file /etc/freeradius/3.0/policy.d/operator-name
including configuration file /etc/freeradius/3.0/policy.d/dhcp
including configuration file /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/3.0/policy.d/filter
including configuration file /etc/freeradius/3.0/policy.d/control
including files in directory /etc/freeradius/3.0/sites-enabled/
including configuration file /etc/freeradius/3.0/sites-enabled/default
including configuration file /etc/freeradius/3.0/sites-enabled/inner-tunnel
main {
security {
user = "freerad"
group = "freerad"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm ulm.edu {
}
realm warhawks.ulm.edu {
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client wireless {
ipaddr = 10.0.0.0/8
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = eap
# Creating Auth-Type = MS-CHAP
# Creating Auth-Type = mschap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/3.0/mods-enabled/files
files {
filename = "/etc/freeradius/3.0/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
}
# Loaded module rlm_exec
# Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/3.0/mods-enabled/digest
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/3.0/mods-enabled/replicate
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/3.0/mods-enabled/dynamic_clients
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/3.0/mods-enabled/unpack
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
eap {
default_eap_type = "peap"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_detail
# Loading module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/3.0/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/3.0/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/3.0/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/3.0/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/3.0/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loading module "ntlm_auth" from file /etc/freeradius/3.0/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
soh {
dhcp = yes
}
# Loaded module rlm_radutmp
# Loading module "sradutmp" from file /etc/freeradius/3.0/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔÙÛÜ"
}
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_ldap
# Loading module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
ldap {
server = "ulm-ldap1.ulm.edu"
port = 389
identity = "cn=proxyagent,ou=profile,dc=ulm,dc=edu"
password = <<< secret >>>
sasl {
}
user {
scope = "sub"
access_positive = yes
sasl {
}
}
group {
filter = "(objectClass=posixGroup)"
scope = "sub"
name_attribute = "cn"
membership_attribute = "memberUid"
membership_filter = "(|(memberUid=%{%{Stripped-User-Name}:-}))"
cacheable_name = no
cacheable_dn = no
}
client {
filter = "(objectClass=radiusClient)"
scope = "sub"
base_dn = "ou=%{request:Tmp-String-0},ou=People,dc=ulm,dc=edu"
}
profile {
}
options {
ldap_debug = 40
chase_referrals = yes
rebind = yes
net_timeout = 1
res_timeout = 10
srv_timelimit = 3
idle = 60
probes = 3
interval = 3
}
tls {
ca_file = "/etc/ssl/certs/ca-certificates.crt"
start_tls = yes
require_cert = "demand"
}
}
Creating attribute LDAP-Group
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Loading module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loading module "radutmp" from file /etc/freeradius/3.0/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
instantiate {
}
# Instantiating module "files" from file /etc/freeradius/3.0/mods-enabled/files
reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
# Instantiating module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_leap
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/3.0/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/3.0/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
cipher_list = "DEFAULT"
cipher_server_preference = no
ecdh_curve = "prime256v1"
tls_max_version = ""
tls_min_version = "1.0"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "logintime" from file /etc/freeradius/3.0/mods-enabled/logintime
# Instantiating module "auth_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/3.0/mods-enabled/detail.log
# Instantiating module "IPASS" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/3.0/mods-enabled/realm
# Instantiating module "preprocess" from file /etc/freeradius/3.0/mods-enabled/preprocess
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_reject
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/3.0/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/3.0/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file /etc/freeradius/3.0/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "reject" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/3.0/mods-enabled/always
# Instantiating module "etc_passwd" from file /etc/freeradius/3.0/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
# Instantiating module "mschap" from file /etc/freeradius/3.0/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
/etc/freeradius/3.0/mods-enabled/ldap[319]: Found dynamic expansion in string which will not be dynamically expanded
# Instantiating module "ldap" from file /etc/freeradius/3.0/mods-enabled/ldap
rlm_ldap: libldap vendor: OpenLDAP, version: 20445
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}}"
}
post-auth {
reference = "."
}
rlm_ldap (ldap): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots used
rlm_ldap (ldap): Connecting to ldap://ulm-ldap1.ulm.edu:389 ldap://ulm-ldap2.ulm.edu:389 ldap://ulm-ldap3.ulm.edu:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots used
rlm_ldap (ldap): Connecting to ldap://ulm-ldap1.ulm.edu:389 ldap://ulm-ldap2.ulm.edu:389 ldap://ulm-ldap3.ulm.edu:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots used
rlm_ldap (ldap): Connecting to ldap://ulm-ldap1.ulm.edu:389 ldap://ulm-ldap2.ulm.edu:389 ldap://ulm-ldap3.ulm.edu:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots used
rlm_ldap (ldap): Connecting to ldap://ulm-ldap1.ulm.edu:389 ldap://ulm-ldap2.ulm.edu:389 ldap://ulm-ldap3.ulm.edu:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots used
rlm_ldap (ldap): Connecting to ldap://ulm-ldap1.ulm.edu:389 ldap://ulm-ldap2.ulm.edu:389 ldap://ulm-ldap3.ulm.edu:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
# Instantiating module "expiration" from file /etc/freeradius/3.0/mods-enabled/expiration
# Instantiating module "detail" from file /etc/freeradius/3.0/mods-enabled/detail
# Instantiating module "linelog" from file /etc/freeradius/3.0/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/3.0/mods-enabled/linelog
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/3.0/radiusd.conf
} # server
server default { # from file /etc/freeradius/3.0/sites-enabled/default
# Loading authenticate {...}
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
# Loading post-proxy {...}
# Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
# Loading authenticate {...}
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' -- /etc/freeradius/3.0/sites-enabled/inner-tunnel:331
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 192.135.131.131
port = 1645
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = 192.135.131.131
port = 1646
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address 192.135.131.131 port 1645 bound to server default
Listening on acct address 192.135.131.131 port 1646 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 34289
Ready to process requests
(0) Received Access-Request Id 243 from 10.16.5.233:37824 to 192.135.131.131:1645 length 201
(0) User-Name = "garretdr at warhawks.ulm.edu"
(0) NAS-IP-Address = 10.16.5.233
(0) NAS-Port = 256
(0) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(0) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(0) Framed-MTU = 1400
(0) NAS-Port-Type = Wireless-802.11
(0) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(0) EAP-Message = 0x0203001e016761727265746472407761726861776b732e756c6d2e656475
(0) Message-Authenticator = 0x719eec12e19611272589577e21d326c4
(0) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(0) authorize {
(0) if (User-Name =~ /@ulm\.edu$$/i){
(0) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(0) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(0) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(0) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(0) update request {
(0) Tmp-String-0 = "Students"
(0) } # update request = noop
(0) [preprocess] = ok
(0) [mschap] = noop
(0) eap: Peer sent EAP Response (code 2) ID 3 length 30
(0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(0) [eap] = ok
(0) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(0) } # authorize = ok
(0) Found Auth-Type = eap
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) authenticate {
(0) eap: Peer sent packet with method EAP Identity (1)
(0) eap: Calling submodule eap_peap to process data
(0) eap_peap: Initiating new EAP-TLS session
(0) eap_peap: [eaptls start] = request
(0) eap: Sending EAP Request (code 1) ID 4 length 6
(0) eap: EAP session adding &reply:State = 0x0af81fc10afc0641
(0) [eap] = handled
(0) } # authenticate = handled
(0) Using Post-Auth-Type Challenge
(0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(0) Challenge { ... } # empty sub-section is ignored
(0) Sent Access-Challenge Id 243 from 192.135.131.131:1645 to 10.16.5.233:37824 length 0
(0) EAP-Message = 0x010400061920
(0) Message-Authenticator = 0x00000000000000000000000000000000
(0) State = 0x0af81fc10afc06415515fc1a2a06c488
(0) Finished request
Waking up in 4.9 seconds.
(0) Cleaning up request packet ID 243 with timestamp +22
Ready to process requests
(1) Received Access-Request Id 244 from 10.16.5.233:37824 to 192.135.131.131:1645 length 201
(1) User-Name = "garretdr at warhawks.ulm.edu"
(1) NAS-IP-Address = 10.16.5.233
(1) NAS-Port = 256
(1) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(1) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(1) Framed-MTU = 1400
(1) NAS-Port-Type = Wireless-802.11
(1) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(1) EAP-Message = 0x0202001e016761727265746472407761726861776b732e756c6d2e656475
(1) Message-Authenticator = 0x91f630746c642f845e5f01792e40faa5
(1) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(1) authorize {
(1) if (User-Name =~ /@ulm\.edu$$/i){
(1) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(1) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(1) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(1) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(1) update request {
(1) Tmp-String-0 = "Students"
(1) } # update request = noop
(1) [preprocess] = ok
(1) [mschap] = noop
(1) eap: Peer sent EAP Response (code 2) ID 2 length 30
(1) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(1) [eap] = ok
(1) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(1) } # authorize = ok
(1) Found Auth-Type = eap
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) authenticate {
(1) eap: Peer sent packet with method EAP Identity (1)
(1) eap: Calling submodule eap_peap to process data
(1) eap_peap: Initiating new EAP-TLS session
(1) eap_peap: [eaptls start] = request
(1) eap: Sending EAP Request (code 1) ID 3 length 6
(1) eap: EAP session adding &reply:State = 0x70d010cc70d309fd
(1) [eap] = handled
(1) } # authenticate = handled
(1) Using Post-Auth-Type Challenge
(1) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(1) Challenge { ... } # empty sub-section is ignored
(1) Sent Access-Challenge Id 244 from 192.135.131.131:1645 to 10.16.5.233:37824 length 0
(1) EAP-Message = 0x010300061920
(1) Message-Authenticator = 0x00000000000000000000000000000000
(1) State = 0x70d010cc70d309fd8fc315d6148f5835
(1) Finished request
Waking up in 4.9 seconds.
(2) Received Access-Request Id 245 from 10.16.5.233:37824 to 192.135.131.131:1645 length 373
(2) User-Name = "garretdr at warhawks.ulm.edu"
(2) NAS-IP-Address = 10.16.5.233
(2) NAS-Port = 256
(2) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(2) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(2) Framed-MTU = 1400
(2) NAS-Port-Type = Wireless-802.11
(2) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(2) EAP-Message = 0x020300b81980000000ae16030300a9010000a503035dbc5a919d75b59e60f70a687bd80eff8ece928872e863309de6d65b219cd9d200003cc02cc02bc030c02f009f009ec024c023c028c027c00ac009c014c01300390033009d009c003d003c0035002f000a006a004000380032001300050004010000
(2) State = 0x70d010cc70d309fd8fc315d6148f5835
(2) Message-Authenticator = 0x202d164d703d417bbbc5459fe721dba0
(2) session-state: No cached attributes
(2) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(2) authorize {
(2) if (User-Name =~ /@ulm\.edu$$/i){
(2) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(2) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(2) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(2) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(2) update request {
(2) Tmp-String-0 = "Students"
(2) } # update request = noop
(2) [preprocess] = ok
(2) [mschap] = noop
(2) eap: Peer sent EAP Response (code 2) ID 3 length 184
(2) eap: Continuing tunnel setup
(2) [eap] = ok
(2) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(2) } # authorize = ok
(2) Found Auth-Type = eap
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) authenticate {
(2) eap: Expiring EAP session with state 0x0af81fc10afc0641
(2) eap: Finished EAP session with state 0x70d010cc70d309fd
(2) eap: Previous EAP request found for state 0x70d010cc70d309fd, released from the list
(2) eap: Peer sent packet with method EAP PEAP (25)
(2) eap: Calling submodule eap_peap to process data
(2) eap_peap: Continuing EAP-TLS
(2) eap_peap: Peer indicated complete TLS record size will be 174 bytes
(2) eap_peap: Got complete TLS record (174 bytes)
(2) eap_peap: [eaptls verify] = length included
(2) eap_peap: (other): before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: TLS_accept: before SSL initialization
(2) eap_peap: <<< recv UNKNOWN TLS VERSION ?0304? [length 00a9]
(2) eap_peap: TLS_accept: SSLv3/TLS read client hello
(2) eap_peap: >>> send TLS 1.2 [length 003d]
(2) eap_peap: TLS_accept: SSLv3/TLS write server hello
(2) eap_peap: >>> send TLS 1.2 [length 02ed]
(2) eap_peap: TLS_accept: SSLv3/TLS write certificate
(2) eap_peap: >>> send TLS 1.2 [length 014d]
(2) eap_peap: TLS_accept: SSLv3/TLS write key exchange
(2) eap_peap: >>> send TLS 1.2 [length 0004]
(2) eap_peap: TLS_accept: SSLv3/TLS write server done
(2) eap_peap: TLS_accept: Need to read more data: SSLv3/TLS write server done
(2) eap_peap: In SSL Handshake Phase
(2) eap_peap: In SSL Accept mode
(2) eap_peap: [eaptls process] = handled
(2) eap: Sending EAP Request (code 1) ID 4 length 1004
(2) eap: EAP session adding &reply:State = 0x70d010cc71d409fd
(2) [eap] = handled
(2) } # authenticate = handled
(2) Using Post-Auth-Type Challenge
(2) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(2) Challenge { ... } # empty sub-section is ignored
(2) Sent Access-Challenge Id 245 from 192.135.131.131:1645 to 10.16.5.233:37824 length 0
(2) EAP-Message = 0x010403ec19c00000048f160303003d02000039030322c1a247834043fcb177df9c68e0db5d78056086fa7c8676c10e9b86c5336dd100c030000011ff01000100000b0004030001020017000016030302ed0b0002e90002e60002e3308202df308201c7a0030201020214042f5cb9d9ef336c10566a6f56
(2) Message-Authenticator = 0x00000000000000000000000000000000
(2) State = 0x70d010cc71d409fd8fc315d6148f5835
(2) Finished request
Waking up in 4.9 seconds.
(3) Received Access-Request Id 246 from 10.16.5.233:37824 to 192.135.131.131:1645 length 195
(3) User-Name = "garretdr at warhawks.ulm.edu"
(3) NAS-IP-Address = 10.16.5.233
(3) NAS-Port = 256
(3) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(3) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(3) Framed-MTU = 1400
(3) NAS-Port-Type = Wireless-802.11
(3) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(3) EAP-Message = 0x020400061900
(3) State = 0x70d010cc71d409fd8fc315d6148f5835
(3) Message-Authenticator = 0x522ff35ab87b51afdad1729ebf902909
(3) session-state: No cached attributes
(3) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(3) authorize {
(3) if (User-Name =~ /@ulm\.edu$$/i){
(3) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(3) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(3) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(3) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(3) update request {
(3) Tmp-String-0 = "Students"
(3) } # update request = noop
(3) [preprocess] = ok
(3) [mschap] = noop
(3) eap: Peer sent EAP Response (code 2) ID 4 length 6
(3) eap: Continuing tunnel setup
(3) [eap] = ok
(3) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(3) } # authorize = ok
(3) Found Auth-Type = eap
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) authenticate {
(3) eap: Expiring EAP session with state 0x0af81fc10afc0641
(3) eap: Finished EAP session with state 0x70d010cc71d409fd
(3) eap: Previous EAP request found for state 0x70d010cc71d409fd, released from the list
(3) eap: Peer sent packet with method EAP PEAP (25)
(3) eap: Calling submodule eap_peap to process data
(3) eap_peap: Continuing EAP-TLS
(3) eap_peap: Peer ACKed our handshake fragment
(3) eap_peap: [eaptls verify] = request
(3) eap_peap: [eaptls process] = handled
(3) eap: Sending EAP Request (code 1) ID 5 length 179
(3) eap: EAP session adding &reply:State = 0x70d010cc72d509fd
(3) [eap] = handled
(3) } # authenticate = handled
(3) Using Post-Auth-Type Challenge
(3) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(3) Challenge { ... } # empty sub-section is ignored
(3) Sent Access-Challenge Id 246 from 192.135.131.131:1645 to 10.16.5.233:37824 length 0
(3) EAP-Message = 0x010500b31900185766ba5ecda611e243ea5e256d1497cf2b6b312ba05bbcb0d0f6fd93ef7ca6a613a2ef61e94e53738d38525d5ac58272de98f443eaaf325abdc9954e0f15f22bf727e69479342b011ecc1f1e7e3f5dc6dc73aeb827285f88a38203a8296bf6d4e2e0da870c4a7cb26cadc71ed78712da
(3) Message-Authenticator = 0x00000000000000000000000000000000
(3) State = 0x70d010cc72d509fd8fc315d6148f5835
(3) Finished request
Waking up in 4.9 seconds.
(4) Received Access-Request Id 247 from 10.16.5.233:37824 to 192.135.131.131:1645 length 325
(4) User-Name = "garretdr at warhawks.ulm.edu"
(4) NAS-IP-Address = 10.16.5.233
(4) NAS-Port = 256
(4) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(4) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(4) Framed-MTU = 1400
(4) NAS-Port-Type = Wireless-802.11
(4) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(4) EAP-Message = 0x0205008819800000007e16030300461000004241040c760ca3b49c5290887c248dda6a5ab381005f8c643a6883397bc316edc9613dfb06801295ae714a6dbf551828b8c1df66bce6f05eea067900b55108939f31ec14030300010116030300280000000000000000411176ff39b3ddfa4c0a3743167412
(4) State = 0x70d010cc72d509fd8fc315d6148f5835
(4) Message-Authenticator = 0x38b10654b59780ab1db121cc205bfcfd
(4) session-state: No cached attributes
(4) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(4) authorize {
(4) if (User-Name =~ /@ulm\.edu$$/i){
(4) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(4) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(4) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(4) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(4) update request {
(4) Tmp-String-0 = "Students"
(4) } # update request = noop
(4) [preprocess] = ok
(4) [mschap] = noop
(4) eap: Peer sent EAP Response (code 2) ID 5 length 136
(4) eap: Continuing tunnel setup
(4) [eap] = ok
(4) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(4) } # authorize = ok
(4) Found Auth-Type = eap
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) authenticate {
(4) eap: Expiring EAP session with state 0x0af81fc10afc0641
(4) eap: Finished EAP session with state 0x70d010cc72d509fd
(4) eap: Previous EAP request found for state 0x70d010cc72d509fd, released from the list
(4) eap: Peer sent packet with method EAP PEAP (25)
(4) eap: Calling submodule eap_peap to process data
(4) eap_peap: Continuing EAP-TLS
(4) eap_peap: Peer indicated complete TLS record size will be 126 bytes
(4) eap_peap: Got complete TLS record (126 bytes)
(4) eap_peap: [eaptls verify] = length included
(4) eap_peap: TLS_accept: SSLv3/TLS write server done
(4) eap_peap: <<< recv TLS 1.2 [length 0046]
(4) eap_peap: TLS_accept: SSLv3/TLS read client key exchange
(4) eap_peap: TLS_accept: SSLv3/TLS read change cipher spec
(4) eap_peap: <<< recv TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS read finished
(4) eap_peap: >>> send TLS 1.2 [length 0001]
(4) eap_peap: TLS_accept: SSLv3/TLS write change cipher spec
(4) eap_peap: >>> send TLS 1.2 [length 0010]
(4) eap_peap: TLS_accept: SSLv3/TLS write finished
(4) eap_peap: (other): SSL negotiation finished successfully
(4) eap_peap: SSL Connection Established
(4) eap_peap: [eaptls process] = handled
(4) eap: Sending EAP Request (code 1) ID 6 length 57
(4) eap: EAP session adding &reply:State = 0x70d010cc73d609fd
(4) [eap] = handled
(4) } # authenticate = handled
(4) Using Post-Auth-Type Challenge
(4) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(4) Challenge { ... } # empty sub-section is ignored
(4) Sent Access-Challenge Id 247 from 192.135.131.131:1645 to 10.16.5.233:37824 length 0
(4) EAP-Message = 0x01060039190014030300010116030300280cb15e6509c512cd35de4d424223bb3a4c3d007de5e3106f5f294649444341dd47db8b239148ef8a
(4) Message-Authenticator = 0x00000000000000000000000000000000
(4) State = 0x70d010cc73d609fd8fc315d6148f5835
(4) Finished request
Waking up in 4.9 seconds.
(5) Received Access-Request Id 248 from 10.16.5.233:37824 to 192.135.131.131:1645 length 195
(5) User-Name = "garretdr at warhawks.ulm.edu"
(5) NAS-IP-Address = 10.16.5.233
(5) NAS-Port = 256
(5) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(5) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(5) Framed-MTU = 1400
(5) NAS-Port-Type = Wireless-802.11
(5) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(5) EAP-Message = 0x020600061900
(5) State = 0x70d010cc73d609fd8fc315d6148f5835
(5) Message-Authenticator = 0x65cf222520fd46557bc1fb67b56c952f
(5) session-state: No cached attributes
(5) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(5) authorize {
(5) if (User-Name =~ /@ulm\.edu$$/i){
(5) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(5) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(5) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(5) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(5) update request {
(5) Tmp-String-0 = "Students"
(5) } # update request = noop
(5) [preprocess] = ok
(5) [mschap] = noop
(5) eap: Peer sent EAP Response (code 2) ID 6 length 6
(5) eap: Continuing tunnel setup
(5) [eap] = ok
(5) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(5) } # authorize = ok
(5) Found Auth-Type = eap
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) authenticate {
(5) eap: Expiring EAP session with state 0x0af81fc10afc0641
(5) eap: Finished EAP session with state 0x70d010cc73d609fd
(5) eap: Previous EAP request found for state 0x70d010cc73d609fd, released from the list
(5) eap: Peer sent packet with method EAP PEAP (25)
(5) eap: Calling submodule eap_peap to process data
(5) eap_peap: Continuing EAP-TLS
(5) eap_peap: Peer ACKed our handshake fragment. handshake is finished
(5) eap_peap: [eaptls verify] = success
(5) eap_peap: [eaptls process] = success
(5) eap_peap: Session established. Decoding tunneled attributes
(5) eap_peap: PEAP state TUNNEL ESTABLISHED
(5) eap: Sending EAP Request (code 1) ID 7 length 40
(5) eap: EAP session adding &reply:State = 0x70d010cc74d709fd
(5) [eap] = handled
(5) } # authenticate = handled
(5) Using Post-Auth-Type Challenge
(5) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(5) Challenge { ... } # empty sub-section is ignored
(5) Sent Access-Challenge Id 248 from 192.135.131.131:1645 to 10.16.5.233:37824 length 0
(5) EAP-Message = 0x010700281900170303001d0cb15e6509c512ce44f8d52e113645d936816f400fee5660683f00e15d
(5) Message-Authenticator = 0x00000000000000000000000000000000
(5) State = 0x70d010cc74d709fd8fc315d6148f5835
(5) Finished request
Waking up in 3.4 seconds.
(6) Received Access-Request Id 249 from 10.16.5.233:37824 to 192.135.131.131:1645 length 250
(6) User-Name = "garretdr at warhawks.ulm.edu"
(6) NAS-IP-Address = 10.16.5.233
(6) NAS-Port = 256
(6) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(6) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(6) Framed-MTU = 1400
(6) NAS-Port-Type = Wireless-802.11
(6) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(6) EAP-Message = 0x0207003d190017030300320000000000000001604fcf1a45e1d413365b32d25abb02a90b4d6a7e731981556c237b7ac24e7fbdc99ea4ef57eb63a09e67
(6) State = 0x70d010cc74d709fd8fc315d6148f5835
(6) Message-Authenticator = 0x29450bc72b458f39c079d20776256aca
(6) session-state: No cached attributes
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(6) authorize {
(6) if (User-Name =~ /@ulm\.edu$$/i){
(6) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(6) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(6) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(6) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(6) update request {
(6) Tmp-String-0 = "Students"
(6) } # update request = noop
(6) [preprocess] = ok
(6) [mschap] = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 61
(6) eap: Continuing tunnel setup
(6) [eap] = ok
(6) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) authenticate {
(6) eap: Expiring EAP session with state 0x0af81fc10afc0641
(6) eap: Finished EAP session with state 0x70d010cc74d709fd
(6) eap: Previous EAP request found for state 0x70d010cc74d709fd, released from the list
(6) eap: Peer sent packet with method EAP PEAP (25)
(6) eap: Calling submodule eap_peap to process data
(6) eap_peap: Continuing EAP-TLS
(6) eap_peap: [eaptls verify] = ok
(6) eap_peap: Done initial handshake
(6) eap_peap: [eaptls process] = ok
(6) eap_peap: Session established. Decoding tunneled attributes
(6) eap_peap: PEAP state WAITING FOR INNER IDENTITY
(6) eap_peap: Identity - garretdr at warhawks.ulm.edu
(6) eap_peap: Got inner identity 'garretdr at warhawks.ulm.edu'
(6) eap_peap: Setting default EAP type for tunneled EAP session
(6) eap_peap: Got tunneled request
(6) eap_peap: EAP-Message = 0x0207001e016761727265746472407761726861776b732e756c6d2e656475
(6) eap_peap: Setting User-Name to garretdr at warhawks.ulm.edu
(6) eap_peap: Sending tunneled request to inner-tunnel
(6) eap_peap: EAP-Message = 0x0207001e016761727265746472407761726861776b732e756c6d2e656475
(6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(6) eap_peap: User-Name = "garretdr at warhawks.ulm.edu"
(6) Virtual server inner-tunnel received request
(6) EAP-Message = 0x0207001e016761727265746472407761726861776b732e756c6d2e656475
(6) FreeRADIUS-Proxied-To = 127.0.0.1
(6) User-Name = "garretdr at warhawks.ulm.edu"
(6) WARNING: Outer and inner identities are the same. User privacy is compromised.
(6) server inner-tunnel {
(6) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authorize {
(6) [mschap] = noop
(6) suffix: Checking for suffix after "@"
(6) suffix: Looking up realm "warhawks.ulm.edu" for User-Name = "garretdr at warhawks.ulm.edu"
(6) suffix: Found realm "warhawks.ulm.edu"
(6) suffix: Adding Stripped-User-Name = "garretdr"
(6) suffix: Adding Realm = "warhawks.ulm.edu"
(6) suffix: Authentication realm is LOCAL
(6) [suffix] = ok
(6) update control {
(6) &Proxy-To-Realm := LOCAL
(6) } # update control = noop
(6) eap: Peer sent EAP Response (code 2) ID 7 length 30
(6) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize
(6) [eap] = ok
(6) } # authorize = ok
(6) Found Auth-Type = eap
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(6) authenticate {
(6) eap: Peer sent packet with method EAP Identity (1)
(6) eap: Calling submodule eap_mschapv2 to process data
(6) eap_mschapv2: Issuing Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 43
(6) eap: EAP session adding &reply:State = 0xadd3b0a5addbaa87
(6) [eap] = handled
(6) } # authenticate = handled
(6) } # server inner-tunnel
(6) Virtual server sending reply
(6) EAP-Message = 0x0108002b1a0108002610c4aa073a8be62f504deeb0c533e3cc4f667265657261646975732d332e302e3136
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0xadd3b0a5addbaa876da34ad4c66d6a57
(6) eap_peap: Got tunneled reply code 11
(6) eap_peap: EAP-Message = 0x0108002b1a0108002610c4aa073a8be62f504deeb0c533e3cc4f667265657261646975732d332e302e3136
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0xadd3b0a5addbaa876da34ad4c66d6a57
(6) eap_peap: Got tunneled reply RADIUS code 11
(6) eap_peap: EAP-Message = 0x0108002b1a0108002610c4aa073a8be62f504deeb0c533e3cc4f667265657261646975732d332e302e3136
(6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000
(6) eap_peap: State = 0xadd3b0a5addbaa876da34ad4c66d6a57
(6) eap_peap: Got tunneled Access-Challenge
(6) eap: Sending EAP Request (code 1) ID 8 length 74
(6) eap: EAP session adding &reply:State = 0x70d010cc75d809fd
(6) [eap] = handled
(6) } # authenticate = handled
(6) Using Post-Auth-Type Challenge
(6) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(6) Challenge { ... } # empty sub-section is ignored
(6) Sent Access-Challenge Id 249 from 192.135.131.131:1645 to 10.16.5.233:37824 length 0
(6) EAP-Message = 0x0108004a1900170303003f0cb15e6509c512cffe7dcd14da3191c6ed4a581a11c39528d637bcdf5ef914b5d98019937e3f495e24ae327bc6fe64b4cc657327bb517bc1cf0441e28cb3bf
(6) Message-Authenticator = 0x00000000000000000000000000000000
(6) State = 0x70d010cc75d809fd8fc315d6148f5835
(6) Finished request
Waking up in 3.4 seconds.
(7) Received Access-Request Id 250 from 10.16.5.233:37824 to 192.135.131.131:1645 length 304
(7) User-Name = "garretdr at warhawks.ulm.edu"
(7) NAS-IP-Address = 10.16.5.233
(7) NAS-Port = 256
(7) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(7) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(7) Framed-MTU = 1400
(7) NAS-Port-Type = Wireless-802.11
(7) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(7) EAP-Message = 0x020800731900170303006800000000000000024d46bfdbff12cffbef86d9fd1f18c9e711408726738f3c94a639609bc550588b29ca808bedc8bb8e3d115dd23b70d9c3de1410772b89d1f7358ec0eeecac75cb8c6ee9907e611dca99001c0ae022652e2ccb177e4353fa3f271a86f9295fd9b7
(7) State = 0x70d010cc75d809fd8fc315d6148f5835
(7) Message-Authenticator = 0x5e2235594000bcded1888dd03c8657ea
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(7) authorize {
(7) if (User-Name =~ /@ulm\.edu$$/i){
(7) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(7) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(7) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(7) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(7) update request {
(7) Tmp-String-0 = "Students"
(7) } # update request = noop
(7) [preprocess] = ok
(7) [mschap] = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 115
(7) eap: Continuing tunnel setup
(7) [eap] = ok
(7) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(7) } # authorize = ok
(7) Found Auth-Type = eap
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) authenticate {
(7) eap: Expiring EAP session with state 0x0af81fc10afc0641
(7) eap: Finished EAP session with state 0x70d010cc75d809fd
(7) eap: Previous EAP request found for state 0x70d010cc75d809fd, released from the list
(7) eap: Peer sent packet with method EAP PEAP (25)
(7) eap: Calling submodule eap_peap to process data
(7) eap_peap: Continuing EAP-TLS
(7) eap_peap: [eaptls verify] = ok
(7) eap_peap: Done initial handshake
(7) eap_peap: [eaptls process] = ok
(7) eap_peap: Session established. Decoding tunneled attributes
(7) eap_peap: PEAP state phase2
(7) eap_peap: EAP method MSCHAPv2 (26)
(7) eap_peap: Got tunneled request
(7) eap_peap: EAP-Message = 0x020800541a0208004f312d6574b19839285ab0cd540f6acabee1000000000000000028bb3239675b583fa76fd5745751d0b4de9d93c0531cce17006761727265746472407761726861776b732e756c6d2e656475
(7) eap_peap: Setting User-Name to garretdr at warhawks.ulm.edu
(7) eap_peap: Sending tunneled request to inner-tunnel
(7) eap_peap: EAP-Message = 0x020800541a0208004f312d6574b19839285ab0cd540f6acabee1000000000000000028bb3239675b583fa76fd5745751d0b4de9d93c0531cce17006761727265746472407761726861776b732e756c6d2e656475
(7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1
(7) eap_peap: User-Name = "garretdr at warhawks.ulm.edu"
(7) eap_peap: State = 0xadd3b0a5addbaa876da34ad4c66d6a57
(7) Virtual server inner-tunnel received request
(7) EAP-Message = 0x020800541a0208004f312d6574b19839285ab0cd540f6acabee1000000000000000028bb3239675b583fa76fd5745751d0b4de9d93c0531cce17006761727265746472407761726861776b732e756c6d2e656475
(7) FreeRADIUS-Proxied-To = 127.0.0.1
(7) User-Name = "garretdr at warhawks.ulm.edu"
(7) State = 0xadd3b0a5addbaa876da34ad4c66d6a57
(7) WARNING: Outer and inner identities are the same. User privacy is compromised.
(7) server inner-tunnel {
(7) session-state: No cached attributes
(7) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) authorize {
(7) [mschap] = noop
(7) suffix: Checking for suffix after "@"
(7) suffix: Looking up realm "warhawks.ulm.edu" for User-Name = "garretdr at warhawks.ulm.edu"
(7) suffix: Found realm "warhawks.ulm.edu"
(7) suffix: Adding Stripped-User-Name = "garretdr"
(7) suffix: Adding Realm = "warhawks.ulm.edu"
(7) suffix: Authentication realm is LOCAL
(7) [suffix] = ok
(7) update control {
(7) &Proxy-To-Realm := LOCAL
(7) } # update control = noop
(7) eap: Peer sent EAP Response (code 2) ID 8 length 84
(7) eap: No EAP Start, assuming it's an on-going EAP conversation
(7) [eap] = updated
(7) [files] = noop
rlm_ldap (ldap): Reserved connection (0)
(7) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
(7) ldap: --> (uid=garretdr)
(7) ldap: EXPAND ou=%{request:Tmp-String-0},ou=People,dc=ulm,dc=edu
(7) ldap: --> ou=,ou=People,dc=ulm,dc=edu
(7) ldap: Performing search in "ou=,ou=People,dc=ulm,dc=edu" with filter "(uid=garretdr)", scope "sub"
(7) ldap: Waiting for search result...
(7) ldap: ERROR: Failed performing search: Invalid DN syntax
(7) ldap: ERROR: Server said: Invalid DN.
rlm_ldap (ldap): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots used
rlm_ldap (ldap): Connecting to ldap://ulm-ldap1.ulm.edu:389 ldap://ulm-ldap2.ulm.edu:389 ldap://ulm-ldap3.ulm.edu:389
rlm_ldap (ldap): Waiting for bind result...
rlm_ldap (ldap): Bind successful
(7) [ldap] = fail
(7) } # authorize = fail
(7) Using Post-Auth-Type Reject
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/inner-tunnel
(7) Post-Auth-Type REJECT {
(7) attr_filter.access_reject: EXPAND %{User-Name}
(7) attr_filter.access_reject: --> garretdr at warhawks.ulm.edu
(7) attr_filter.access_reject: Matched entry DEFAULT at line 11
(7) [attr_filter.access_reject] = updated
(7) update outer.session-state {
(7) &Module-Failure-Message := &request:Module-Failure-Message -> 'ldap: Failed performing search: Invalid DN syntax'
(7) } # update outer.session-state = noop
(7) } # Post-Auth-Type REJECT = updated
(7) } # server inner-tunnel
(7) Virtual server sending reply
(7) eap_peap: Got tunneled reply code 3
(7) eap_peap: Got tunneled reply RADIUS code 3
(7) eap_peap: Tunneled authentication was rejected
(7) eap_peap: FAILURE
(7) eap: Sending EAP Request (code 1) ID 9 length 46
(7) eap: EAP session adding &reply:State = 0x70d010cc76d909fd
(7) [eap] = handled
(7) } # authenticate = handled
(7) Using Post-Auth-Type Challenge
(7) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(7) Challenge { ... } # empty sub-section is ignored
(7) session-state: Saving cached attributes
(7) Module-Failure-Message := "ldap: Failed performing search: Invalid DN syntax"
(7) Sent Access-Challenge Id 250 from 192.135.131.131:1645 to 10.16.5.233:37824 length 0
(7) EAP-Message = 0x0109002e190017030300230cb15e6509c512d06233ca956f42a71a6a74f60850d0ae5539c8157673ac5386ac7821
(7) Message-Authenticator = 0x00000000000000000000000000000000
(7) State = 0x70d010cc76d909fd8fc315d6148f5835
(7) Finished request
Waking up in 3.3 seconds.
(8) Received Access-Request Id 251 from 10.16.5.233:37824 to 192.135.131.131:1645 length 235
(8) User-Name = "garretdr at warhawks.ulm.edu"
(8) NAS-IP-Address = 10.16.5.233
(8) NAS-Port = 256
(8) Called-Station-Id = "48-C0-93-82-3D-B1:ULM-Rad-Test"
(8) Calling-Station-Id = "E4-A4-71-1E-C6-2F"
(8) Framed-MTU = 1400
(8) NAS-Port-Type = Wireless-802.11
(8) Connect-Info = "CONNECT 6Mbps/6Mbps 802.11a"
(8) EAP-Message = 0x0209002e190017030300230000000000000003eacf58ab23334604e35a4225d631f4fd1a01c3273bcb42b3ef317b
(8) State = 0x70d010cc76d909fd8fc315d6148f5835
(8) Message-Authenticator = 0x5d93216ae275b07bb77aadf66e6ca07c
(8) Restoring &session-state
(8) &session-state:Module-Failure-Message := "ldap: Failed performing search: Invalid DN syntax"
(8) # Executing section authorize from file /etc/freeradius/3.0/sites-enabled/default
(8) authorize {
(8) if (User-Name =~ /@ulm\.edu$$/i){
(8) if (User-Name =~ /@ulm\.edu$$/i) -> FALSE
(8) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(8) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) -> TRUE
(8) if (User-Name =~ /@warhawks\.ulm\.edu$$/i) {
(8) update request {
(8) Tmp-String-0 = "Students"
(8) } # update request = noop
(8) [preprocess] = ok
(8) [mschap] = noop
(8) eap: Peer sent EAP Response (code 2) ID 9 length 46
(8) eap: Continuing tunnel setup
(8) [eap] = ok
(8) } # if (User-Name =~ /@warhawks\.ulm\.edu$$/i) = ok
(8) } # authorize = ok
(8) Found Auth-Type = eap
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) authenticate {
(8) eap: Expiring EAP session with state 0x0af81fc10afc0641
(8) eap: Finished EAP session with state 0x70d010cc76d909fd
(8) eap: Previous EAP request found for state 0x70d010cc76d909fd, released from the list
(8) eap: Peer sent packet with method EAP PEAP (25)
(8) eap: Calling submodule eap_peap to process data
(8) eap_peap: Continuing EAP-TLS
(8) eap_peap: [eaptls verify] = ok
(8) eap_peap: Done initial handshake
(8) eap_peap: [eaptls process] = ok
(8) eap_peap: Session established. Decoding tunneled attributes
(8) eap_peap: PEAP state send tlv failure
(8) eap_peap: Received EAP-TLV response
(8) eap_peap: ERROR: The users session was previously rejected: returning reject (again.)
(8) eap_peap: This means you need to read the PREVIOUS messages in the debug output
(8) eap_peap: to find out the reason why the user was rejected
(8) eap_peap: Look for "reject" or "fail". Those earlier messages will tell you
(8) eap_peap: what went wrong, and how to fix the problem
(8) eap: ERROR: Failed continuing EAP PEAP (25) session. EAP sub-module failed
(8) eap: Sending EAP Failure (code 4) ID 9 length 4
(8) eap: Failed in EAP select
(8) [eap] = invalid
(8) } # authenticate = invalid
(8) Failed to authenticate the user
(8) Using Post-Auth-Type Reject
(8) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
(8) Post-Auth-Type REJECT {
(8) attr_filter.access_reject: EXPAND %{User-Name}
(8) attr_filter.access_reject: --> garretdr at warhawks.ulm.edu
(8) attr_filter.access_reject: Matched entry DEFAULT at line 11
(8) [attr_filter.access_reject] = updated
(8) [eap] = noop
(8) policy remove_reply_message_if_eap {
(8) if (&reply:EAP-Message && &reply:Reply-Message) {
(8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(8) else {
(8) [noop] = noop
(8) } # else = noop
(8) } # policy remove_reply_message_if_eap = noop
(8) } # Post-Auth-Type REJECT = updated
(8) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
Waking up in 0.6 seconds.
(8) Sending delayed response
(8) Sent Access-Reject Id 251 from 192.135.131.131:1645 to 10.16.5.233:37824 length 44
(8) EAP-Message = 0x04090004
(8) Message-Authenticator = 0x00000000000000000000000000000000
Waking up in 2.3 seconds.
(1) Cleaning up request packet ID 244 with timestamp +46
(2) Cleaning up request packet ID 245 with timestamp +46
(3) Cleaning up request packet ID 246 with timestamp +46
(4) Cleaning up request packet ID 247 with timestamp +46
Waking up in 1.5 seconds.
(5) Cleaning up request packet ID 248 with timestamp +47
(6) Cleaning up request packet ID 249 with timestamp +47
(7) Cleaning up request packet ID 250 with timestamp +47
(8) Cleaning up request packet ID 251 with timestamp +47
Ready to process requests
-----Original Message-----
From: Freeradius-Users [mailto:freeradius-users-bounces+ataylor=ulm.edu at lists.freeradius.org] On Behalf Of Alan DeKok
Sent: Friday, November 1, 2019 11:11 AM
To: FreeRadius users mailing list <freeradius-users at lists.freeradius.org>
Subject: Re: Variable passing question between modules
On Nov 1, 2019, at 11:48 AM, Adam Taylor <ataylor at ulm.edu> wrote:
> I have been trying for a week and I have everything working on a setup I am doing except for one thing. Setting Tmp-String-0 to a string and using that string in the LDAP module.
That should be simple enough.
> I'm trying to make the config as simple as possible so if I am doing something wrong, please let me know.
>
> I have the following in my authorize section:
>
> authorize {
> if (User-Name =~ /@ulm\.edu$$/i){
> update request {
> Tmp-String-0 = "Employees"
> }
OK...
> Basically if the login is XXX at ulm.edu<mailto:XXX at ulm.edu> set TMP-String-0 to "Employees" or if XXX at warhawks.ulm.edu<mailto:XXX at warhawks.ulm.edu> set to "Students"
>
> I then have the following in my ldap config:
>
> base_dn = 'ou=%{request:Tmp-String-0},ou=People,dc=ulm,dc=edu'
That should be a double-quotes string, not single quotes. But OK>
> The problem is ${request:Tmp-String-0} is always null and I get this in debug:
>
> (6) ldap: EXPAND ou=%{request:Tmp-String-0},ou=People,dc=ulm,dc=edu
> (6) ldap: --> ou=,ou=People,dc=ulm,dc=edu
> (6) ldap: Performing search in "ou=,ou=People,dc=ulm,dc=edu" with filter "(uid=pp)", scope "sub"
>
> I went to verify that it was actually setting the variable and see this:
>
> (6) update request {
> (6) Tmp-String-0 = "Students"
> (6) } # update request = noop
>
> I have tried every different way I can think of and it just will not set Tmp-String-0. I have tried both = and := as well. What am I doing wrong?
Post the *full* debug output. Let us figure it out.
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list