Access-Accept but condition isn't correct

[Marcin Romanowski]

niedz., 26 sty 2020 o 20:01 Marcin Romanowski <marcin at nicram.net>
napisał(a):

> Hello,
> I'd like to check mac condition with ISG cisco.
>
> in users file:
> 192.168.10.100 Cleartext-Password := "cisco", *Calling-Station-Id :=
> "00:50:79:66:68:01"*
>

my mistake, this should be Calling-Station-Id *== *"00:50:79:66:68:01"



>
>                Cisco-Service-info = "QU;200000;D;600000",
>                             Cisco-Avpair +=
> 'subscriber:accounting-list=BRAS',
>                Cisco-Avpair += 'subscriber:keepalive=interval 10',
>                Cisco-Avpair += 'subscriber:idle-timeout-direction=inbound'
>
> debug:
>
> (0) Received Access-Request Id 60 from 1.1.1.3:1645 to 1.1.1.2:1812
> length 135
> (0)   User-Name = "192.168.10.100"
> (0)   User-Password = "cisco"
> (0)   Framed-IP-Address = 192.168.10.100
> (0)   *Calling-Station-Id = "00:50:79:66:68:00"*
> (0)   NAS-Port-Type = Virtual
> (0)   NAS-Port = 0
> (0)   NAS-Port-Id = "0/0/0/0"
> (0)   Service-Type = Outbound-User
> (0)   NAS-IP-Address = 1.1.1.3
> (0)   Acct-Session-Id = "00000FDE"
> (0)   NAS-Identifier = "ASR_1"
> (0)   Event-Timestamp = "Jan 26 2020 18:54:55 UTC"
> (0) # Executing section authorize from file
> /etc/freeradius/3.0/sites-enabled/default
> (0)   authorize {
> (0)     policy filter_username {
> (0)       if (&User-Name) {
> (0)       if (&User-Name)  -> TRUE
> (0)       if (&User-Name)  {
> (0)         if (&User-Name =~ / /) {
> (0)         if (&User-Name =~ / /)  -> FALSE
> (0)         if (&User-Name =~ /@[^@]*@/ ) {
> (0)         if (&User-Name =~ /@[^@]*@/ )  -> FALSE
> (0)         if (&User-Name =~ /\.\./ ) {
> (0)         if (&User-Name =~ /\.\./ )  -> FALSE
> (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))  {
> (0)         if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (0)         if (&User-Name =~ /\.$/)  {
> (0)         if (&User-Name =~ /\.$/)   -> FALSE
> (0)         if (&User-Name =~ /@\./)  {
> (0)         if (&User-Name =~ /@\./)   -> FALSE
> (0)       } # if (&User-Name)  = notfound
> (0)     } # policy filter_username = notfound
> (0)     [preprocess] = ok
> (0)     [chap] = noop
> (0)     [mschap] = noop
> (0)     [digest] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "192.168.10.100", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0)     [suffix] = noop
> (0) eap: No EAP-Message, not doing EAP
> (0)     [eap] = noop
> (0) files: users: Matched entry 192.168.10.100 at line 37
> (0)     [files] = ok
> (0)     [expiration] = noop
> (0)     [logintime] = noop
> (0)     [pap] = updated
> (0)   } # authorize = updated
> (0) Found Auth-Type = PAP
> (0) # Executing group from file /etc/freeradius/3.0/sites-enabled/default
> (0)   Auth-Type PAP {
> (0) pap: Login attempt with password
> (0) pap: Comparing with "known good" Cleartext-Password
> (0) pap: User authenticated successfully
> (0)     [pap] = ok
> (0)   } # Auth-Type PAP = ok
> (0) # Executing section post-auth from file
> /etc/freeradius/3.0/sites-enabled/default
> (0)   post-auth {
> (0)     update {
> (0)       No attributes updated
> (0)     } # update = noop
> (0)     [exec] = noop
> (0)     policy remove_reply_message_if_eap {
> (0)       if (&reply:EAP-Message && &reply:Reply-Message) {
> (0)       if (&reply:EAP-Message && &reply:Reply-Message)  -> FALSE
> (0)       else {
> (0)         [noop] = noop
> (0)       } # else = noop
> (0)     } # policy remove_reply_message_if_eap = noop
> (0)   } # post-auth = noop
> (0) Sent Access-Accept Id 60 from 1.1.1.2:1812 to 1.1.1.3:1645 length 0
> (0)   Cisco-Service-Info = "QU;200000;D;600000"
> (0)   Cisco-AVPair = "subscriber:accounting-list=BRAS"
> (0)   Cisco-AVPair = "subscriber:keepalive=interval 10"
> (0)   Cisco-AVPair = "subscriber:idle-timeout-direction=inbound"
> (0) Finished request
>
> Calling-Station-Id is different than in config but i get Access-Accept.
>
> Where I'm doing wrong?
>
> Best Regards
> Marcin
>


-- 
Marcin Romanowski / nicraM