Error: /etc/raddb/mods-enabled/mschap[10]: 'winbind' auth not enabled at compiled time

[Pizu]

Hi All,

Thanks for your help, I managed to make it work :)

Regards,

Pizu


On Tue, 6 Apr 2021 at 15:34, L.P.H. van Belle via Freeradius-Users <
freeradius-users at lists.freeradius.org> wrote:

> Read :
> http://deployingradius.com/documents/configuration/active_directory.html
>
> and
>
>
> https://wiki.samba.org/index.php/Authenticating_Freeradius_against_Active_Directory
>
> ( mostly same info. )
>
> Make sure you have the needed settings in samba/winbind.
>
>
> Greetz,
>
> Louis
>
>
> > -----Oorspronkelijk bericht-----
> > Van: Freeradius-Users [mailto:freeradius-users-
> > bounces+belle=bazuin.nl at lists.freeradius.org] Namens Pizu
> > Verzonden: dinsdag 6 april 2021 15:08
> > Aan: FreeRadius users mailing list
> > Onderwerp: Re: Error: /etc/raddb/mods-enabled/mschap[10]: 'winbind' auth
> > not enabled at compiled time
> >
> > Thanks all for your help.
> >
> > I'll go for the latest freeradius 3.0.21 just to be safe.
> >
> > Regards,
> >
> > Pizu
> >
> >
> > On Tue, 6 Apr 2021 at 14:37, Alan DeKok <aland at deployingradius.com>
> wrote:
> >
> > > On Apr 6, 2021, at 8:34 AM, Pizu <pizpower at gmail.com> wrote:
> > > > If I don't manage, Which version do you suggest I should go?
> > >
> > >   Always use the latest version.
> > >
> > >   If the packages don't have winbind enabled, then you will need to
> > build
> > > it yourself from source.
> > >
> > > > Am going to test 802.1x with Cisco Switches.
> > > >
> > > > Config am planning to use:
> > >
> > >   We don't really review peoples configurations.  There's just too much
> > > going on.  If it works, it works.  If it doesn't work, ask questions.
> > >
> > >   Alan DeKok.
> > >
> > >
> > > -
> > > List info/subscribe/unsubscribe? See
> > > http://www.freeradius.org/list/users.html
> > -
> > List info/subscribe/unsubscribe? See
> > http://www.freeradius.org/list/users.html
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html