Question about the new sql client behaivour in 3.0.22
bpbp at fastmail.com
bpbp at fastmail.com
Wed May 26 04:37:22 CEST 2021
Hi list, I just upgraded to 3.0.22 and I have a question about an issue I just ran into. I see in the changelog there's some changes to how clients are loaded.
Previously I was using the nas table via MySQL to load clients into the global list for all my virtual servers. With 3.0.22 I can see the clients successfully loaded but freeradius is then ignoring any accounting requests from those clients with:
radiusd[32025]: Ignoring request to acct address * port 1821 bound to server combined from unknown client 192.168.10.215 port 37819 proto udp
I resolved the issue by putting the clients into clients.conf with the following basic config for now
client radius01.syd1 {
ipaddr = 192.168.10.215
secret = [..]
}
and for reference the previously working SQL configuration for that client
mysql> SELECT * FROM radius.nas WHERE nasname = '192.168.10.215';
+----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+
| id | nasname | shortname | type | ports | secret | server | community | description |
+----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+
| 85 | 192.168.10.215 | radius01.syd1 | other | NULL | [..]| NULL | NULL | |
+----+----------------+---------------+-------+-------+----------+--------+-----------+-------------+
1 row in set (0.00 sec)
radmin shows the following slight differences after loading both
radmin> show client list verbose
client radius01.syd1 {
ipaddr = 192.168.10.215/32
proto = udp
secret = [..]
longname = 192.168.10.215
shortname = radius01.syd1
number = 0
global = yes
}
client {
ipaddr = 192.168.10.215/32
proto = *
secret = [...]
longname = 192.168.10.215
shortname = radius01.syd1
nas_type = other
number = 47
dynamic = yes
lifetime = 0
global = yes
}
My question is what am I doing wrong here that the client loaded from sql isn't working?
I thought it might be the changes around client loading but radmin shows that it was successfully loaded as a global client and not tied to a single virtualhost.
Thanks,
Boden
radiusd -X output
FreeRADIUS Version 3.0.22
Copyright (C) 1999-2021 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/sql
including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/raddb/mods-enabled/sqlippool
including configuration file /etc/raddb/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail.my-company.net.au
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/abfab-tr
including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /etc/raddb/policy.d/rfc7542
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/combined-walled-garden
including configuration file /etc/raddb/sites-enabled/combined-walled-garden-nbn
including configuration file /etc/raddb/sites-enabled/control-socket
including configuration file /etc/raddb/sites-enabled/coa
including configuration file /etc/raddb/sites-enabled/decoupled-accounting-my-company
including configuration file /etc/raddb/sites-enabled/status
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 4096
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = yes
auth_badpass = yes
auth_goodpass = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
realm DEFAULT {
}
radiusd: #### Loading Clients ####
client radius01.syd1 {
ipaddr = 192.168.10.215
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client radius02.syd1 {
ipaddr = 192.168.10.222
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Autz-Type = Status-Server
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_detail
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_exec
# Loading module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/visp_users"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = yes
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_sql
# Loading module "sql" from file /etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "192.168.10.206"
port = 3306
login = "radius"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM usergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
auto_escape = no
accounting {
reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedipv6pool, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-IPv6-Pool}', '%{Delegated-IPv6-Prefix}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval = %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedipv6pool = '%{Framed-IPv6-Pool}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate, downstream, upstream) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S.%M', '%{request:Actual-Data-Rate-Downstream}', '%{request:Actual-Data-Rate-Upstream}' )"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_sqlippool
# Loading module "sqlippool" from file /etc/raddb/mods-enabled/sqlippool
sqlippool {
sql_module_instance = "sql"
lease_duration = 3600
pool_name = "Pool-Name"
default_pool = "main_pool"
attribute_name = "Framed-IP-Address"
allocate_begin = "START TRANSACTION"
allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= NOW() - INTERVAL 1 SECOND AND nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
allocate_clear_timeout = 1
allocate_existing = ""
allocate_requested = ""
allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND ( expiry_time < NOW() OR expiry_time IS NULL OR expiry_time = 0 OR ( nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port-Id}' ) ) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port-Id}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I'"
allocate_commit = "COMMIT"
pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
start_begin = ""
start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
start_commit = ""
alive_begin = ""
alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
alive_commit = ""
stop_begin = ""
stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port-Id}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
stop_commit = ""
on_begin = ""
on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
on_commit = ""
off_begin = ""
off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
off_commit = ""
messages {
exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
}
}
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loading module "detail.my-company.net.au" from file /etc/raddb/mods-enabled/detail.my-company.net.au
detail detail.my-company.net.au {
filename = "/var/log/radius/radacct/detail-%Y%m%d:%H:%G"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
instantiate {
}
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
# Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/visp_users
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
# Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
# Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.6.45
mysql {
tls {
tls_required = no
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 10
min = 10
max = 40
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 600
retry_delay = 1
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 40 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 39 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 38 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 37 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 36 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (5), 1 of 35 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (6), 1 of 34 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (7), 1 of 33 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (8), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Opening additional connection (9), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.168.10.206 via TCP/IP, server version 8.0.25, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 203.23.236.6 (VIC-LNS) to global clients list
rlm_sql (203.23.236.6): Client "VIC-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.26 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.26): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.46 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.46): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.226 (Station) to global clients list
rlm_sql (192.168.10.226): Client "Station" (sql) added
rlm_sql (sql): Adding client 202.172.107.74 (Astro) to global clients list
rlm_sql (202.172.107.74): Client "Astro" (sql) added
rlm_sql (sql): Adding client 202.172.107.75 (VM2) to global clients list
rlm_sql (202.172.107.75): Client "VM2" (sql) added
rlm_sql (sql): Adding client 203.23.236.80 (Raven) to global clients list
rlm_sql (203.23.236.80): Client "Raven" (sql) added
rlm_sql (sql): Adding client 203.23.236.2 (3G-LNS) to global clients list
rlm_sql (203.23.236.2): Client "3G-LNS" (sql) added
rlm_sql (sql): Adding client 124.254.72.146 (ISPOne-radius-1) to global clients list
rlm_sql (124.254.72.146): Client "ISPOne-radius-1" (sql) added
rlm_sql (sql): Adding client 124.254.72.147 (ISPOne-radius-2) to global clients list
rlm_sql (124.254.72.147): Client "ISPOne-radius-2" (sql) added
rlm_sql (sql): Adding client 203.194.28.131 (SOUL1) to global clients list
rlm_sql (203.194.28.131): Client "SOUL1" (sql) added
rlm_sql (sql): Adding client 10.20.20.2 (ADSL-LNS) to global clients list
rlm_sql (10.20.20.2): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 203.194.28.132 (SOUL2) to global clients list
rlm_sql (203.194.28.132): Client "SOUL2" (sql) added
rlm_sql (sql): Adding client 203.194.56.120 (SOUL3) to global clients list
rlm_sql (203.194.56.120): Client "SOUL3" (sql) added
rlm_sql (sql): Adding client 203.194.56.121 (SOUL4) to global clients list
rlm_sql (203.194.56.121): Client "SOUL4" (sql) added
rlm_sql (sql): Adding client 203.194.59.120 (SOUL5) to global clients list
rlm_sql (203.194.59.120): Client "SOUL5" (sql) added
rlm_sql (sql): Adding client 203.194.59.121 (SOUL6) to global clients list
rlm_sql (203.194.59.121): Client "SOUL6" (sql) added
rlm_sql (sql): Adding client 203.221.163.160 (SOUL7) to global clients list
rlm_sql (203.221.163.160): Client "SOUL7" (sql) added
rlm_sql (sql): Adding client 203.221.11.41 (SOUL8) to global clients list
rlm_sql (203.221.11.41): Client "SOUL8" (sql) added
rlm_sql (sql): Adding client 203.194.23.101 (SOUL9) to global clients list
rlm_sql (203.194.23.101): Client "SOUL9" (sql) added
rlm_sql (sql): Adding client 127.0.0.1 (localhost) to global clients list
rlm_sql (127.0.0.1): Client "localhost" (sql) added
rlm_sql (sql): Adding client 203.23.236.121 (new-titan) to global clients list
rlm_sql (203.23.236.121): Client "new-titan" (sql) added
rlm_sql (sql): Adding client 203.23.236.146 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.146): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.66 (Angel) to global clients list
rlm_sql (203.23.236.66): Client "Angel" (sql) added
rlm_sql (sql): Adding client 202.172.107.251 (ADSL-LNS) to global clients list
rlm_sql (202.172.107.251): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.195 (Station Eris) to global clients list
rlm_sql (192.168.10.195): Client "Station Eris" (sql) added
rlm_sql (sql): Adding client 203.23.236.30 (NBN-LNS) to global clients list
rlm_sql (203.23.236.30): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.46 (ADSL-LNS) to global clients list
Ignoring duplicate client 203.23.236.46
rlm_sql (203.23.236.46): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.58 (NBN-LNS) to global clients list
rlm_sql (203.23.236.58): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.236.154 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.154): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.202 (crimson) to global clients list
rlm_sql (192.168.10.202): Client "crimson" (sql) added
rlm_sql (sql): Adding client 203.23.236.54 (ADSL-LNS) to global clients list
rlm_sql (203.23.236.54): Client "ADSL-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.205 (Station Galaxy) to global clients list
rlm_sql (192.168.10.205): Client "Station Galaxy" (sql) added
rlm_sql (sql): Adding client 203.23.236.50 (NBN-LNS) to global clients list
rlm_sql (203.23.236.50): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 10.10.100.2 (NBN-LNS-2) to global clients list
rlm_sql (10.10.100.2): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 10.10.200.2 (NBN-LNS-2) to global clients list
rlm_sql (10.10.200.2): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 10.10.100.5 (NBN-LNS-2) to global clients list
rlm_sql (10.10.100.5): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 10.10.200.5 (NBN-LNS-2) to global clients list
rlm_sql (10.10.200.5): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 203.29.125.11 (noc3) to global clients list
rlm_sql (203.29.125.11): Client "noc3" (sql) added
rlm_sql (sql): Adding client 203.23.236.11 (NBN-LNS-2) to global clients list
rlm_sql (203.23.236.11): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 203.23.237.13 (NBN-LNS-3) to global clients list
rlm_sql (203.23.237.13): Client "NBN-LNS-3" (sql) added
rlm_sql (sql): Adding client 192.168.10.208 (behemoth) to global clients list
rlm_sql (192.168.10.208): Client "behemoth" (sql) added
rlm_sql (sql): Adding client 203.23.237.12 (NBN-LNS-2) to global clients list
rlm_sql (203.23.237.12): Client "NBN-LNS-2" (sql) added
rlm_sql (sql): Adding client 202.172.100.9 (NBN-LNS) to global clients list
rlm_sql (202.172.100.9): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 202.172.100.35 (NBN-LNS) to global clients list
rlm_sql (202.172.100.35): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 203.23.237.11 (NBN-LNS) to global clients list
rlm_sql (203.23.237.11): Client "NBN-LNS" (sql) added
rlm_sql (sql): Adding client 192.168.10.215 (radius01.syd1) to global clients list
rlm_sql (192.168.10.215): Client "radius01.syd1" (sql) added
rlm_sql (sql): Adding client 192.168.10.222 (radius02.syd1) to global clients list
rlm_sql (192.168.10.222): Client "radius02.syd1" (sql) added
rlm_sql (sql): Released connection (0)
# Instantiating module "sqlippool" from file /etc/raddb/mods-enabled/sqlippool
Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1"
# Instantiating module "detail.my-company.net.au" from file /etc/raddb/mods-enabled/detail.my-company.net.au
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server combined { # from file /etc/raddb/sites-enabled/combined-walled-garden
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server combined
server combined-nbn { # from file /etc/raddb/sites-enabled/combined-walled-garden-nbn
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server combined-nbn
server coa { # from file /etc/raddb/sites-enabled/coa
# Loading recv-coa {...}
# Loading send-coa {...}
} # server coa
server read-detail.my-company.net.au { # from file /etc/raddb/sites-enabled/decoupled-accounting-my-company
# Loading preacct {...}
# Loading accounting {...}
} # server read-detail.my-company.net.au
server status { # from file /etc/raddb/sites-enabled/status
# Loading authorize {...}
Compiling Autz-Type Status-Server for attr Autz-Type
} # server status
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
mode = "rw"
peercred = yes
}
}
listen {
type = "coa"
virtual_server = "coa"
ipaddr = *
port = 3799
client radius01.syd1 {
ipaddr = 192.168.10.215
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Ignoring duplicate client 192.168.10.215
client radius02.syd1 {
ipaddr = 192.168.10.222
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Ignoring duplicate client 192.168.10.222
}
listen {
type = "auth"
ipaddr = *
port = 1815
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 1816
}
listen {
type = "auth"
ipaddr = *
port = 1820
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 1821
}
listen {
type = "detail"
listen {
filename = "/var/log/radius/radacct/detail-*:*"
load_factor = 70
poll_interval = 1
retry_interval = 30
one_shot = no
track = yes
}
}
listen {
type = "status"
ipaddr = 127.0.0.1
port = 18121
client admin {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
}
Listening on command file /var/run/radiusd/radiusd.sock
Listening on coa address * port 3799 bound to server coa
Listening on auth address * port 1815 bound to server combined
Listening on acct address * port 1816 bound to server combined
Listening on auth address * port 1820 bound to server combined-nbn
Listening on acct address * port 1821 bound to server combined-nbn
Listening on detail file /var/log/radius/radacct/detail-*:* as server read-detail.my-company.net.au
Listening on status address 127.0.0.1 port 18121 bound to server status
Ready to process requests
More information about the Freeradius-Users
mailing list