Ignoring request to auth... ....from unknown client

Ray Young ryoung at realnetworks.com
Thu Nov 11 02:38:08 CET 2021


Hello, 
 
Radtest works successfully (confirmed with Access-Accept) when using the loopback (127.0.0.1) address.  I’m receiving the following error from radius debug (radiusd -X) when attempting to reach the IP of the freeradius server.
 
Ignoring request to auth address * port 1812 bound to server default from unknown client 10.224.x.x port 57243 proto udp
 
I don’t understand why this IP is an unknown client.  I have 3 machines in the clients.conf file (including the radius server itself using radtest with the actual IP instead of the loopback) and this is happening to all of them.
 
Clients line from clients.conf follows:
 
# IPv6 Client
client localhost_ipv6 {
       ipv6addr      = ::1
       secret        = testing123
}
 
WLC {
    ipaddr = 10.124.x.y
    secret = testing123
}
 
freeradiusserver {
    ipaddr = 10.224.a.b
    secret = testing123
}
 
Ali's Machine {
    ipaddr = 10.124.r.s
    secret = testing123
 
 
Debug output shows that the clients.conf file is being read but is not showing the clients are being loaded.  Full debug output below.
 
[root at freeradiusserver etc]# radiusd -X
FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
       user = "radiusd"
       group = "radiusd"
       allow_core_dumps = no
 }
       name = "radiusd"
       prefix = "/usr"
       localstatedir = "/var"
       logdir = "/var/log/radius"
       run_dir = "/var/run/radiusd"
}
main {
       name = "radiusd"
       prefix = "/usr"
       localstatedir = "/var"
       sbindir = "/usr/sbin"
       logdir = "/var/log/radius"
       run_dir = "/var/run/radiusd"
       libdir = "/usr/lib64/freeradius"
       radacctdir = "/var/log/radius/radacct"
       hostname_lookups = no
       max_request_time = 30
       cleanup_delay = 5
       max_requests = 16384
       pidfile = "/var/run/radiusd/radiusd.pid"
       checkrad = "/usr/sbin/checkrad"
       debug_level = 0
       proxy_requests = yes
 log {
       stripped_names = no
       auth = no
       auth_badpass = no
       auth_goodpass = no
       colourise = yes
       msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
       max_attributes = 200
       reject_delay = 1.000000
       status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
       retry_delay = 5
       retry_count = 3
       default_fallback = no
       dead_time = 120
       wake_all_if_all_dead = no
 }
 home_server localhost {
       ipaddr = 127.0.0.1
       port = 1812
       type = "auth"
       secret = <<< secret >>>
       response_window = 20.000000
       response_timeouts = 1
       max_outstanding = 65536
       zombie_period = 40
       status_check = "status-server"
       ping_interval = 30
       check_interval = 30
       check_timeout = 4
       num_answers_to_alive = 3
       revive_interval = 120
  limit {
       max_connections = 16
       max_requests = 0
       lifetime = 0
       idle_timeout = 0
  }
  coa {
       irt = 2
       mrt = 16
       mrc = 5
       mrd = 30
  }
 }
 home_server_pool my_auth_failover {
       type = fail-over
       home_server = localhost
 }
realm https://urldefense.proofpoint.com/v2/url?u=http-3A__example.com&d=DwQGaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=TFc2e96VTD_Nr_No68ZX3kYcuv89UIKBRdkse6IVEFE&m=5j98ya54wb8DL633TPEMUN3YB73Bk6qcDWfamUO9vWs&s=6eecIAY_707wmPf60DlBT0uPvvkmSSWaSTOQBiWUpMM&e= {
       auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
       ipaddr = 127.0.0.1
       require_message_authenticator = no
       secret = <<< secret >>>
       nas_type = "other"
       proto = "*"
  limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
  }
 }
 client localhost_ipv6 {
       ipv6addr = ::1
       require_message_authenticator = no
       secret = <<< secret >>>
  limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = digest
 # Creating Auth-Type = eap
 # Creating Auth-Type = PAP
 # Creating Auth-Type = CHAP
 # Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
 modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
       rcode = "reject"
       simulcount = 0
       mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
       rcode = "fail"
       simulcount = 0
       mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
       rcode = "ok"
       simulcount = 0
       mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
       rcode = "handled"
       simulcount = 0
       mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
       rcode = "invalid"
       simulcount = 0
       mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
       rcode = "userlock"
       simulcount = 0
       mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
       rcode = "notfound"
       simulcount = 0
       mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
       rcode = "noop"
       simulcount = 0
       mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
       rcode = "updated"
       simulcount = 0
       mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
       filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
       key = "%{Realm}"
       relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
       filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
       key = "%{Realm}"
       relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
       filename = "/etc/raddb/mods-config/attr_filter/access_reject"
       key = "%{User-Name}"
       relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
       filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
       key = "%{User-Name}"
       relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
       filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
       key = "%{User-Name}"
       relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
       driver = "rlm_cache_rbtree"
       key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
       ttl = 15
       max_entries = 0
       epoch = 0
       add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
       format = "%b %e %Y %H:%M:%S %Z"
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
       filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
  }
  # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
  detail auth_log {
       filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
  }
  # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  detail reply_log {
       filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
       filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
  }
  # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
       filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
       header = "%t"
       permissions = 384
       locking = no
       escape_filenames = no
       log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
       default_eap_type = "md5"
       timer_expire = 60
       ignore_unknown_eap_types = no
       cisco_accounting_username_bug = no
       max_sessions = 16384
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
       wait = yes
       program = "/bin/echo %{User-Name}"
       input_pairs = "request"
       output_pairs = "reply"
       shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
       wait = no
       input_pairs = "request"
       shell_escape = yes
       timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
       safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
       filename = "/etc/raddb/mods-config/files/authorize"
       acctusersfile = "/etc/raddb/mods-config/files/accounting"
       preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
       filename = "/var/log/radius/linelog"
       escape_filenames = no
       syslog_severity = "info"
       permissions = 384
       format = "This is a log message for %{User-Name}"
       reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  linelog log_accounting {
       filename = "/var/log/radius/linelog-accounting"
       escape_filenames = no
       syslog_severity = "info"
       permissions = 384
       format = ""
       reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
  logintime {
       minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
       use_mppe = yes
       require_encryption = no
       require_strong = no
       with_ntdomain_hack = yes
       ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key --username=%{%{Stripped-User-Name}:-%{%{User-Name}:-None}} --domain=%{%{mschap:NT-Domain}:-corporate.domain.com} --challenge=%{%{mschap:Challenge}:-00} --nt-response=%{%{mschap:NT-Response}:-00}"
   passchange {
   }
       allow_retry = yes
       winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
       wait = yes
       program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
       shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
       normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
       filename = "/etc/passwd"
       format = "*User-Name:Crypt-Password:"
       delimiter = ":"
       ignore_nislike = no
       ignore_empty = yes
       allow_multiple_keys = no
       hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
  preprocess {
       huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
       hints = "/etc/raddb/mods-config/preprocess/hints"
       with_ascend_hack = no
       ascend_channels_per_line = 23
       with_ntdomain_hack = no
       with_specialix_jetstream_hack = no
       with_cisco_vsa_hack = no
       with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
       filename = "/var/log/radius/radutmp"
       username = "%{User-Name}"
       case_sensitive = yes
       check_with_nas = yes
       permissions = 384
       caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
       format = "prefix"
       delimiter = "/"
       ignore_default = no
       ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
       format = "suffix"
       delimiter = "@"
       ignore_default = no
       ignore_null = no
  }
  # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
  realm realmpercent {
       format = "suffix"
       delimiter = "%"
       ignore_default = no
       ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
       format = "prefix"
       delimiter = "\\"
       ignore_default = no
       ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
       dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
       filename = "/var/log/radius/sradutmp"
       username = "%{User-Name}"
       case_sensitive = yes
       check_with_nas = yes
       permissions = 420
       caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
       radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  instantiate {
  }
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay"       found in filter list for realm "DEFAULT". 
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". 
  # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
  # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
       challenge = "Password: "
       auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
       tls = "tls-common"
   }
   tls-config tls-common {
       verify_depth = 0
       ca_path = "/etc/raddb/certs"
       pem_file_type = yes
       private_key_file = "/etc/raddb/certs/server.pem"
       certificate_file = "/etc/raddb/certs/server.pem"
       ca_file = "/etc/raddb/certs/ca.pem"
       private_key_password = <<< secret >>>
       dh_file = "/etc/raddb/certs/dh"
       fragment_size = 1024
       include_length = yes
       auto_chain = yes
       check_crl = no
       check_all_crl = no
       cipher_list = "DEFAULT"
       cipher_server_preference = no
       ecdh_curve = "prime256v1"
    cache {
       enable = no
       lifetime = 24
       max_entries = 255
    }
    verify {
       skip_if_ocsp_ok = no
    }
    ocsp {
       enable = no
       override_cert_url = yes
url = "https://urldefense.proofpoint.com/v2/url?u=http-3A__127.0.0.1_ocsp_-26quot-3B&d=DwQGaQ&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=TFc2e96VTD_Nr_No68ZX3kYcuv89UIKBRdkse6IVEFE&m=5j98ya54wb8DL633TPEMUN3YB73Bk6qcDWfamUO9vWs&s=b6kvFdFfRjmpDdc3dUw8LBF2wPIVSS7shB2ZAesLusM&e=
       use_nonce = yes
       timeout = 0
       softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
       tls = "tls-common"
       default_eap_type = "md5"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       virtual_server = "inner-tunnel"
       include_length = yes
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
       tls = "tls-common"
       default_eap_type = "mschapv2"
       copy_request_to_tunnel = no
       use_tunneled_reply = no
       proxy_tunneled_request_as_eap = yes
       virtual_server = "inner-tunnel"
       soh = no
       require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
       with_ntdomain_hack = no
       send_error = no
   }
  # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): authenticating by calling 'ntlm_auth'
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
 # Skipping contents of 'if' as it is always 'false' -- /etc/raddb/sites-enabled/inner-tunnel:330
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
       type = "auth"
       ipaddr = *
       port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
       type = "acct"
       ipaddr = *
       port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
       type = "auth"
       ipv6addr = ::
       port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
       type = "acct"
       ipv6addr = ::
       port = 0
   limit {
       max_connections = 16
       lifetime = 0
       idle_timeout = 30
   }
}
listen {
       type = "auth"
       ipaddr = 127.0.0.1
       port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 50772
Listening on proxy address :: port 34116
Ready to process requests
 
 
 
 
Ignoring request to auth address * port 1812 bound to server default from unknown client 10.224.a.b port 57243 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from unknown client 10.224.a.b port 57243 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from unknown client 10.224.a.b port 57243 proto udp
Ready to process requests
 
Any help is appreciated.
 
Thanks,
Ray





More information about the Freeradius-Users mailing list