Frame-IP-Address is not assigned in EAP

[kabin mool]

Hello freeradius team,

Currently I am doing some experiment for my home setup to assign static IP address using freeradius "Frame-IP-Address" but it is not assigned. Can you let me know how and why it is creating this?

Also, in response how to remove all the messages and simple reply with Frame-IP-Address only?

Request messages :

Received Access-Request Id 0 from 192.168.1.1:49671 to 192.168.1.110:1812 length 199
Tue Oct 19 09:34:19 2021 : Debug: (9)   User-Name = "bob"
Tue Oct 19 09:34:19 2021 : Debug: (9)   NAS-IP-Address = 192.168.1.1
Tue Oct 19 09:34:19 2021 : Debug: (9)   Called-Station-Id = ""
Tue Oct 19 09:34:19 2021 : Debug: (9)   Calling-Station-Id = "XXXXXXXXXXXXXXXX"
Tue Oct 19 09:34:19 2021 : Debug: (9)   NAS-Identifier = "XXXXXXXXX"
Tue Oct 19 09:34:19 2021 : Debug: (9)   NAS-Port = 122
Tue Oct 19 09:34:19 2021 : Debug: (9)   Framed-MTU = 1400
Tue Oct 19 09:34:19 2021 : Debug: (9)   State = 0xd5087246dd016bbc3cccb89e1542d61a
Tue Oct 19 09:34:19 2021 : Debug: (9)   NAS-Port-Type = Wireless-802.11
Tue Oct 19 09:34:19 2021 : Debug: (9)   EAP-Message = 0x0209002e190017030300230000000000000004a462aee4b621fe152e45dfee6d01ababa665d70d651f4101369737
Tue Oct 19 09:34:19 2021 : Debug: (9)   Message-Authenticator = 0xf047b70fb44507050a2916afb4482524

Response Message :

 Sent Access-Accept Id 0 from 192.168.1.110:1812 to 192.168.1.1:49671 length 0
Tue Oct 19 09:34:19 2021 : Debug: (9)   MS-MPPE-Recv-Key = 0x73891bd4ad6882551acefc226fb0b3d2fcfc9a66f6e098099b3f1b635daad835
Tue Oct 19 09:34:19 2021 : Debug: (9)   MS-MPPE-Send-Key = 0x9eea9b7294f8d12d70bce316148439b65cca6050774f58b0064571c6302691e4
Tue Oct 19 09:34:19 2021 : Debug: (9)   EAP-Message = 0x03090004
Tue Oct 19 09:34:19 2021 : Debug: (9)   Message-Authenticator = 0x00000000000000000000000000000000
Tue Oct 19 09:34:19 2021 : Debug: (9)   User-Name = "bob"
Tue Oct 19 09:34:19 2021 : Debug: (9)   Framed-IP-Address = 192.168.1.240
Tue Oct 19 09:34:19 2021 : Debug: (9) Finished request

Kabin