Checkrad and IPv6 NAS IP address
Fabricio Viana
fabricioviana at hotmail.com
Tue Sep 7 15:24:36 CEST 2021
Hello Alan, how are you? I ran some tests as fast as I could.
Now it's giving the following message:
(0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL
checkrad: Unknown NAS 2804:444:1:1::2, not checking
NAS 2804:444:1:1::2 was added normally:
rlm_sql (sql): Adding client 2804:444:1:1::2 (R1.ITU) to global clients list
rlm_sql (2804:444:1:1::2): Client "R1.ITU" (sql) added
Authentication normally takes place with IPv6. The problem is with checkrad.
Below is the Access-Request package and the freeradius -X command output.
Could you help please?
Thank you!
Fabricio Viana
root at li1268-188:/# freeradius -v
radiusd: FreeRADIUS Version 3.0.24 (git #83d87a2), for host x86_64-pc-linux-gnu
FreeRADIUS Version 3.0.24
(0) Received Access-Request Id 142 from [2804:444:1:1::2]:33926 to [2600:4a00::f132:91a4:f567:34fd]:1812 length 185
(0) Service-Type = Framed-User
(0) Framed-Protocol = PPP
(0) NAS-Port = 15813747
(0) NAS-Port-Type = Ethernet
(0) User-Name = "joseph.test"
(0) Calling-Station-Id = "AA:BB:B6:41:33:AA"
(0) Called-Station-Id = "pppoe-server-olt02"
(0) NAS-Port-Id = "ether3.501-PPPoE-OLT02"
(0) CHAP-Challenge = 0x388b23cbdc8d67936f09a731c70acf6e
(0) CHAP-Password = 0x018003bc3835139074138c89d63370276a
(0) NAS-Identifier = "R1.ITU"
(0) NAS-IPv6-Address = 2804:444:1:1::2
(0) # Executing section authorize from file /etc/freeradius/sites-enabled/default
(0) authorize {
(0) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) {
(0) EXPAND %{Cisco-AVPair[*]}
(0) -->
(0) if ("%{Cisco-AVPair[*]}" =~ /client-mac-address=(.*)/) -> FALSE
(0) elsif (ERX-Dhcp-Mac-Addr =~ /^([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9]).([a-f0-9][a-f0-9])([a-f0-9][a-f0-9])$/) {
(0) ERROR: Failed retrieving values required to evaluate condition
(0) else {
(0) update request {
(0) EXPAND %{toupper:%{Calling-Station-Id}}
(0) --> AA:BB:B6:41:33:AA
(0) Calling-Station-Id := AA:BB:B6:41:33:AA
(0) } # update request = noop
(0) } # else = noop
(0) if (!control:Cleartext-Password){
(0) if (!control:Cleartext-Password) -> TRUE
(0) if (!control:Cleartext-Password) {
(0) update control {
(0) Cleartext-Password := "no_user_found_radiusnet"
(0) } # update control = noop
(0) } # if (!control:Cleartext-Password) = noop
(0) [preprocess] = ok
(0) chap: &control:Auth-Type := CHAP
(0) [chap] = ok
(0) [mschap] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) sql: EXPAND %{User-Name}
(0) sql: --> joseph.test
(0) sql: SQL-User-Name set to 'joseph.test'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'joseph.test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'joseph.test' ORDER BY id
(0) sql: User found in radcheck table
(0) sql: Conditional check items matched, merging assignment check items
(0) sql: Cleartext-Password := "ellen8858"
(0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, username, attribute, value, op FROM radreply WHERE username = 'joseph.test' ORDER BY id
(0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radreply WHERE username = 'joseph.test' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority
(0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'joseph.test' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'joseph.test' ORDER BY priority
(0) sql: User found in the group table
(0) sql: EXPAND SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql: --> SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '2BLO' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '2BLO' ORDER BY id
(0) sql: Group "2BLO": Conditional check items matched
(0) sql: Group "2BLO": Merging assignment check items
(0) sql: Simultaneous-Use := 1
(0) sql: EXPAND SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id
(0) sql: --> SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '2BLO' ORDER BY id
(0) sql: Executing select query: SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '2BLO' ORDER BY id
(0) sql: Group "2BLO": Merging reply items
(0) sql: Mikrotik-Rate-Limit = "100k/100k"
(0) sql: WISPr-Bandwidth-Max-Down = 100000
(0) sql: WISPr-Bandwidth-Max-Up = 100000
(0) sql: Framed-Pool = "pool_bloqueados"
(0) sql: Mikrotik-Address-List = "bloqueados"
rlm_sql (sql): Released connection (1)
(0) [sql] = ok
(0) pap: WARNING: Auth-Type already set. Not setting to PAP
(0) [pap] = noop
(0) } # authorize = ok
(0) Found Auth-Type = CHAP
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Auth-Type CHAP {
(0) chap: Comparing with "known good" Cleartext-Password
(0) chap: CHAP user "joseph.test" authenticated successfully
(0) [chap] = ok
(0) if (request:Service-Type == Login-User && !request:NAS-Port-Type && !reply:Mikrotik-Group){
(0) if (request:Service-Type == Login-User && !request:NAS-Port-Type && !reply:Mikrotik-Group) -> FALSE
(0) if (request:Service-Type == Login-User && request:NAS-Port-Type && reply:Mikrotik-Group){
(0) if (request:Service-Type == Login-User && request:NAS-Port-Type && reply:Mikrotik-Group) -> FALSE
(0) if (request:Service-Type == Framed-User && reply:Mikrotik-Group){
(0) if (request:Service-Type == Framed-User && reply:Mikrotik-Group) -> FALSE
(0) if (reject && Framed-Protocol == PPP) {
(0) if (reject && Framed-Protocol == PPP) -> FALSE
(0) if (invalid && Framed-Protocol == PPP) {
(0) if (invalid && Framed-Protocol == PPP) -> FALSE
(0) } # Auth-Type CHAP = ok
(0) # Executing section session from file /etc/freeradius/sites-enabled/default
(0) session {
(0) sql: EXPAND %{User-Name}
(0) sql: --> joseph.test
(0) sql: SQL-User-Name set to 'joseph.test'
rlm_sql (sql): Reserved connection (2)
(0) sql: EXPAND SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql: --> SELECT COUNT(*) FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL
(0) sql: Executing select query: SELECT COUNT(*) FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL
(0) sql: EXPAND SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL
(0) sql: --> SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL
(0) sql: Executing select query: SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = 'joseph.test' AND acctstoptime IS NULL
checkrad: Unknown NAS 2804:444:1:1::2, not checking
rlm_sql (sql): Released connection (2)
(0) [sql] = ok
(0) } # session = ok
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/freeradius/sites-enabled/default
(0) Post-Auth-Type REJECT {
(0) sql: EXPAND .query
(0) sql: --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (3)
(0) sql: EXPAND %{User-Name}
(0) sql: --> joseph.test
(0) sql: SQL-User-Name set to 'joseph.test'
(0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{Calling-Station-Id}')
(0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'joseph.test', '0x018003bc3835139074138c89d63370276a', 'Access-Reject', UTC_TIMESTAMP(), '2804:444:1:1::2', 'AA:BB:B6:41:33:AA')
(0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( 'joseph.test', '0x018003bc3835139074138c89d63370276a', 'Access-Reject', UTC_TIMESTAMP(), '2804:444:1:1::2', 'AA:BB:B6:41:33:AA')
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (3)
(0) [sql] = ok
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject: --> joseph.test
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0) [attr_filter.access_reject] = updated
(0) [eap] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.3 seconds.
FreeRADIUS Version 3.0.24
Copyright (C) 1999-2021 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/freeradius/dictionary
including configuration file /etc/freeradius/radiusd.conf
including configuration file /etc/freeradius/proxy.conf
including configuration file /etc/freeradius/clients.conf
including files in directory /etc/freeradius/mods-enabled/
including configuration file /etc/freeradius/mods-enabled/pap
including configuration file /etc/freeradius/mods-enabled/linelog
including configuration file /etc/freeradius/mods-enabled/files
including configuration file /etc/freeradius/mods-enabled/eap
including configuration file /etc/freeradius/mods-enabled/echo
including configuration file /etc/freeradius/mods-enabled/unix
including configuration file /etc/freeradius/mods-enabled/expiration
including configuration file /etc/freeradius/mods-enabled/sqlippool_v4
including configuration file /etc/freeradius/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/mods-enabled/chap
including configuration file /etc/freeradius/mods-enabled/utf8
including configuration file /etc/freeradius/mods-enabled/logintime
including configuration file /etc/freeradius/mods-enabled/sqlippool
including configuration file /etc/freeradius/mods-config/sql/ippool/mysql/queries.conf
including configuration file /etc/freeradius/mods-enabled/realm
including configuration file /etc/freeradius/mods-enabled/sql
including configuration file /etc/freeradius/mods-config/sql/main/mysql/queries.conf
including configuration file /etc/freeradius/mods-enabled/radutmp
including configuration file /etc/freeradius/mods-enabled/mschap
including configuration file /etc/freeradius/mods-enabled/unpack
including configuration file /etc/freeradius/mods-enabled/detail.log
including configuration file /etc/freeradius/mods-enabled/attr_filter
including configuration file /etc/freeradius/mods-enabled/dynamic_clients
including configuration file /etc/freeradius/mods-enabled/passwd
including configuration file /etc/freeradius/mods-enabled/ddns_exec
including configuration file /etc/freeradius/mods-enabled/ntlm_auth
including configuration file /etc/freeradius/mods-enabled/preprocess
including configuration file /etc/freeradius/mods-enabled/soh
including configuration file /etc/freeradius/mods-enabled/sradutmp
including configuration file /etc/freeradius/mods-enabled/sqlippool_v6
including configuration file /etc/freeradius/mods-config/sql/ippool/mysql/queries_v6.conf
including configuration file /etc/freeradius/mods-enabled/replicate
including configuration file /etc/freeradius/mods-enabled/exec
including configuration file /etc/freeradius/mods-enabled/cache_eap
including configuration file /etc/freeradius/mods-enabled/expr
including configuration file /etc/freeradius/mods-enabled/always
including configuration file /etc/freeradius/mods-enabled/detail
including configuration file /etc/freeradius/mods-enabled/digest
including files in directory /etc/freeradius/policy.d/
including configuration file /etc/freeradius/policy.d/canonicalization
including configuration file /etc/freeradius/policy.d/eap
including configuration file /etc/freeradius/policy.d/debug
including configuration file /etc/freeradius/policy.d/operator-name
including configuration file /etc/freeradius/policy.d/filter
including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
including configuration file /etc/freeradius/policy.d/accounting
/etc/freeradius/policy.d/accounting[42]: Reference "${IDRADIUSSERVER}" not found
/etc/freeradius/policy.d/accounting[54]: Reference "${IDRADIUSSERVER}" not found
including configuration file /etc/freeradius/policy.d/abfab-tr
including configuration file /etc/freeradius/policy.d/dhcp
including configuration file /etc/freeradius/policy.d/cui
including configuration file /etc/freeradius/policy.d/control
including files in directory /etc/freeradius/sites-enabled/
including configuration file /etc/freeradius/sites-enabled/inner-tunnel
including configuration file /etc/freeradius/sites-enabled/default
including configuration file /etc/freeradius/freeradius.env
including configuration file /etc/freeradius/ddns.env
main {
security {
user = "root"
group = "root"
allow_core_dumps = no
}
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
}
main {
name = "freeradius"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/freeradius"
run_dir = "/var/run/freeradius"
libdir = "/usr/lib/freeradius"
radacctdir = "/var/log/freeradius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
postauth_client_lost = no
pidfile = "/var/run/freeradius/freeradius.pid"
checkrad = "/var/scriptsradius/callcheckrad.sh"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = mschap
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_pap
# Loading module "pap" from file /etc/freeradius/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
linelog {
filename = "/var/log/freeradius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/freeradius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/freeradius/mods-enabled/files
files {
filename = "/etc/freeradius/mods-config/files/authorize"
acctusersfile = "/etc/freeradius/mods-config/files/accounting"
preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
}
# Loaded module rlm_eap
# Loading module "eap" from file /etc/freeradius/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/freeradius/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/freeradius/mods-enabled/unix
unix {
radwtmp = "/var/log/freeradius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/freeradius/mods-enabled/expiration
# Loaded module rlm_sqlippool
# Loading module "sqlippool_v4" from file /etc/freeradius/mods-enabled/sqlippool_v4
sqlippool sqlippool_v4 {
sql_module_instance = "sql"
lease_duration = 3600
pool_name = "Pool-Name"
default_pool = "main_pool"
allocate_begin = "START TRANSACTION"
allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'"
allocate_clear_timeout = 1
allocate_existing = ""
allocate_requested = ""
allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) AND banned = 0 ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL"
allocate_commit = "COMMIT"
pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
start_begin = ""
start_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
start_commit = ""
alive_begin = ""
alive_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
alive_commit = ""
stop_begin = ""
stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
stop_commit = ""
on_begin = ""
on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
on_commit = ""
off_begin = ""
off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
off_commit = ""
messages {
exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
}
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/freeradius/mods-enabled/chap
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loading module "sqlippool" from file /etc/freeradius/mods-enabled/sqlippool
sqlippool {
sql_module_instance = "sql"
lease_duration = 3600
pool_name = "Pool-Name"
default_pool = "main_pool"
ipv6 = yes
allocate_begin = "START TRANSACTION"
allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'"
allocate_clear_timeout = 1
allocate_existing = ""
allocate_requested = ""
allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) AND banned = 0 ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
allocate_update = "UPDATE radippool SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL"
allocate_commit = "COMMIT"
pool_check = "SELECT id FROM radippool WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
start_begin = ""
start_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
start_commit = ""
alive_begin = ""
alive_update = "UPDATE radippool SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
alive_commit = ""
stop_begin = ""
stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
stop_commit = ""
on_begin = ""
on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
on_commit = ""
off_begin = ""
off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
off_commit = ""
messages {
exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
}
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_sql
# Loading module "sql" from file /etc/freeradius/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "192.0.2.2"
port = 3306
login = "radius_user"
password = <<< secret >>>
radius_db = "radius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM nas"
authorize_check_query = "SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, username, attribute, value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT id, groupname, attribute, Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
authorize_group_reply_query = "SELECT id, groupname, attribute, value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
auto_escape = no
accounting {
reference = "%{tolower:type.%{Acct-Status-Type}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}' AND acctstarttime <= UTC_TIMESTAMP()"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}' AND acctstarttime <= UTC_TIMESTAMP()"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6prefix, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', UTC_TIMESTAMP(), UTC_TIMESTAMP(), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Prefix}', '%{Delegated-IPv6-Prefix}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = UTC_TIMESTAMP(), acctinterval = UNIX_TIMESTAMP(UTC_TIMESTAMP()) - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', framedipv6prefix = '%{Framed-IPv6-Prefix}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctstoptime = NULL, nasportid = '%{NAS-Port-Id}', calledstationid = '%{Called-Station-Id}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}' OR AcctUniqueId = '%{Segundo-AcctUnique-Id}' OR AcctUniqueId = '%{Terceiro-AcctUnique-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = UTC_TIMESTAMP(), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE acctsessionid = '%{Acct-Session-Id}' AND username = '%{SQL-User-Name}' AND nasipaddress = '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate, nasipaddress, callingstationid) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', UTC_TIMESTAMP(), '%{%{NAS-IP-Address}:-%{NAS-IPv6-Address}}', '%{Calling-Station-Id}')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
Creating attribute SQL-Group
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
radutmp {
filename = "/var/log/freeradius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
# Loaded module rlm_detail
# Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/freeradius/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/freeradius/mods-enabled/dynamic_clients
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loading module "ddns_del" from file /etc/freeradius/mods-enabled/ddns_exec
exec ddns_del {
wait = yes
program = "/var/scriptsradius/ddns.php del %{User-Name} %{Framed-IP-Address}"
input_pairs = "request"
shell_escape = no
}
# Loading module "ddns_add" from file /etc/freeradius/mods-enabled/ddns_exec
exec ddns_add {
wait = yes
program = "/var/scriptsradius/ddns.php add %{User-Name} %{Framed-IP-Address}"
input_pairs = "request"
shell_escape = no
}
# Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
hints = "/etc/freeradius/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_soh
# Loading module "soh" from file /etc/freeradius/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/freeradius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loading module "sqlippool_v6" from file /etc/freeradius/mods-enabled/sqlippool_v6
sqlippool sqlippool_v6 {
sql_module_instance = "sql"
lease_duration = 3600
pool_name = "Pool-Name"
default_pool = "main_pool"
ipv6 = yes
allocate_begin = "START TRANSACTION"
allocate_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time <= UTC_TIMESTAMP() - INTERVAL 1 SECOND AND nasipaddress = '%{Nas-IP-Address}'"
allocate_clear_timeout = 1
allocate_existing = ""
allocate_requested = ""
allocate_find = "SELECT framedipaddress FROM radippoolv6 WHERE pool_name = '%{control:Pool-Name}' AND (expiry_time < UTC_TIMESTAMP() OR expiry_time IS NULL) ORDER BY (username <> '%{User-Name}'), (callingstationid <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
allocate_update = "UPDATE radippoolv6 SET nasipaddress = '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid = '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE framedipaddress = '%I' AND expiry_time IS NULL"
allocate_commit = "COMMIT"
pool_check = "SELECT id FROM radippoolv6 WHERE pool_name='%{control:Pool-Name}' LIMIT 1"
start_begin = ""
start_update = "UPDATE radippoolv6 SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'"
start_commit = ""
alive_begin = ""
alive_update = "UPDATE radippoolv6 SET expiry_time = UTC_TIMESTAMP() + INTERVAL 3600 SECOND WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'"
alive_commit = ""
stop_begin = ""
stop_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}' AND pool_key = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid = '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IPv6-Prefix}'"
stop_commit = ""
on_begin = ""
on_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
on_commit = ""
off_begin = ""
off_clear = "UPDATE radippoolv6 SET nasipaddress = '', pool_key = 0, callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress = '%{Nas-IP-Address}'"
off_commit = ""
messages {
exists = "Existing IP: %{reply:Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
success = "Allocated IP: %{reply:Framed-IP-Address} from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
clear = "Released IP %{Framed-IP-Address} (did %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
failed = "IP Allocation FAILED from %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
nopool = "No Pool-Name defined (did %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
}
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
# Loading module "exec" from file /etc/freeradius/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_expr
# Loading module "expr" from file /etc/freeradius/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôoùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔOÙÛÜY"
}
# Loaded module rlm_always
# Loading module "reject" from file /etc/freeradius/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/freeradius/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/freeradius/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/freeradius/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/freeradius/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/freeradius/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/freeradius/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/freeradius/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/freeradius/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loading module "detail" from file /etc/freeradius/mods-enabled/detail
detail {
filename = "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/freeradius/mods-enabled/digest
instantiate {
}
# Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
# Instantiating module "linelog" from file /etc/freeradius/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/freeradius/mods-enabled/linelog
# Instantiating module "files" from file /etc/freeradius/mods-enabled/files
reading pairlist file /etc/freeradius/mods-config/files/authorize
reading pairlist file /etc/freeradius/mods-config/files/accounting
reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
# Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
rlm_eap (EAP): Ignoring EAP method 'leap', because it is no longer supported
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/freeradius/certs"
pem_file_type = yes
private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
ca_file = "/etc/ssl/certs/ca-certificates.crt"
private_key_password = <<< secret >>>
dh_file = "/etc/freeradius/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT"
reject_unknown_intermediate_ca = no
ecdh_curve = "prime256v1"
tls_min_version = "1.2"
cache {
enable = yes
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = yes
use_tunneled_reply = yes
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = yes
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file /etc/freeradius/mods-enabled/expiration
# Instantiating module "sqlippool_v4" from file /etc/freeradius/mods-enabled/sqlippool_v4
# Instantiating module "sql" from file /etc/freeradius/mods-enabled/sql
rlm_sql_mysql: libmysql version: 5.7.35
mysql {
tls {
tls_required = no
check_cert = no
check_cert_cn = no
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM nas
rlm_sql (sql): Adding client 2804:444:1:1::2 (R1.ITU) to global clients list
rlm_sql (2804:444:1:1::2): Client "R1.ITU" (sql) added
rlm_sql (sql): Released connection (0)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on 192.0.2.2 via TCP/IP, server version 5.7.18-log, protocol version 10
Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1"
# Instantiating module "logintime" from file /etc/freeradius/mods-enabled/logintime
# Instantiating module "sqlippool" from file /etc/freeradius/mods-enabled/sqlippool
Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1"
# Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
# Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/freeradius/mods-enabled/detail.log
# Instantiating module "attr_filter.post-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
[/etc/freeradius/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT".
# Instantiating module "attr_filter.access_challenge" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/freeradius/mods-enabled/attr_filter
reading pairlist file /etc/freeradius/mods-config/attr_filter/accounting_response
# Instantiating module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file /etc/freeradius/mods-enabled/preprocess
reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
reading pairlist file /etc/freeradius/mods-config/preprocess/hints
# Instantiating module "sqlippool_v6" from file /etc/freeradius/mods-enabled/sqlippool_v6
Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout = 1"
# Instantiating module "cache_eap" from file /etc/freeradius/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
# Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
# Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
# Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
# Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
# Instantiating module "userlock" from file /etc/freeradius/mods-enabled/always
# Instantiating module "notfound" from file /etc/freeradius/mods-enabled/always
# Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
# Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
# Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/freeradius/radiusd.conf
} # server
server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
server default { # from file /etc/freeradius/sites-enabled/default
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server default
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on proxy address * port 38092
Listening on proxy address :: port 58617
Ready to process requests
More information about the Freeradius-Users
mailing list