freeradius 3.2 accounting with sqlippool
mohammed Irheem
mohammed059 at gmail.com
Wed Aug 17 12:29:35 UTC 2022
in this case
ip assign from nas
and i use your solution
sqlippool {
fail = 1
}
(0) Received Accounting-Request Id 141 from 192.168.254.1:45922 to
192.168.254.3:1813 length 251
(0) Service-Type = Framed-User
(0) Framed-Protocol = PPP
(0) NAS-Port = 15728757
(0) NAS-Port-Type = Ethernet
(0) User-Name = "77777"
(0) Calling-Station-Id = "C0:25:E9:4B:81:2D"
(0) Called-Station-Id = "PPPOE4"
(0) NAS-Port-Id = "ether4"
(0) Acct-Session-Id = "81700075"
(0) Framed-IP-Address = 10.104.255.254
(0) Acct-Authentic = RADIUS
(0) Event-Timestamp = "Aug 17 2022 15:26:56 EEST"
(0) Acct-Session-Time = 7800
(0) Idle-Timeout = 0
(0) Session-Timeout = 0
(0) X-Ascend-Data-Rate = 8192000
(0) Ascend-Xmit-Rate = 8192000
(0) X-Ascend-Data-Rate = 4096000
(0) Ascend-Data-Rate = 4096000
(0) Mikrotik-Rate-Limit = "4096k/8192k"
(0) Acct-Input-Octets = 44806899
(0) Acct-Input-Gigawords = 0
(0) Acct-Input-Packets = 201912
(0) Acct-Output-Octets = 441097942
(0) Acct-Output-Gigawords = 0
(0) Acct-Output-Packets = 385525
(0) Acct-Status-Type = Interim-Update
(0) NAS-Identifier = "RouterOS"
(0) Acct-Delay-Time = 0
(0) NAS-IP-Address = 192.168.254.1
(0) # Executing section preacct from file
/usr/local/etc/raddb/sites-enabled/default
(0) preacct {
(0) [preprocess] = ok
(0) policy acct_unique {
(0) update request {
(0) &Tmp-String-9 := "ai:"
(0) } # update request = noop
(0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(0) EXPAND %{hex:&Class}
(0) -->
(0) EXPAND ^%{hex:&Tmp-String-9}
(0) --> ^61693a
(0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
(0) else {
(0) update request {
(0) EXPAND
%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(0) --> 90620c7a1206e21d1265ddec0517ba1e
(0) &Acct-Unique-Session-Id := 90620c7a1206e21d1265ddec0517ba1e
(0) } # update request = noop
(0) } # else = noop
(0) update request {
(0) &Tmp-String-9 !* ANY
(0) } # update request = noop
(0) } # policy acct_unique = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "77777", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) [files] = noop
(0) } # preacct = ok
(0) # Executing section accounting from file
/usr/local/etc/raddb/sites-enabled/default
(0) accounting {
(0) [unix] = noop
rlm_sql (sql): Reserved connection (1)
(0) sqlippool: EXPAND %{User-Name}
(0) sqlippool: --> 77777
(0) sqlippool: SQL-User-Name set to '77777'
(0) sqlippool: EXPAND UPDATE radippool SET expiry_time = NOW() + INTERVAL
1210 SECOND WHERE nasipaddress =
'%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
AND username = '%{User-Name}' AND callingstationid =
'%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'
(0) sqlippool: --> UPDATE radippool SET expiry_time = NOW() + INTERVAL
1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key = '15728757'
AND username = '77777' AND callingstationid = 'C0:25:E9:4B:81:2D' AND
framedipaddress = '10.104.255.254'
(0) sqlippool: Executing query: UPDATE radippool SET expiry_time = NOW() +
INTERVAL 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key =
'15728757' AND username = '77777' AND callingstationid =
'C0:25:E9:4B:81:2D' AND framedipaddress = '10.104.255.254'
rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0
rlm_sql (sql): Released connection (1)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.7.39, protocol version 10
rlm_sql (sql): Closing expired connection (5) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing expired connection (4) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing expired connection (3) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing expired connection (2) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): You probably need to lower "min"
rlm_sql (sql): Closing expired connection (0) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
(0) [sqlippool] = notfound
(0) } # accounting = notfound
(0) Not sending reply to client.
(0) Finished request
(0) Cleaning up request packet ID 141 with timestamp +224 due to done
Ready to process requests
(1) Received Accounting-Request Id 141 from 192.168.254.1:45922 to
192.168.254.3:1813 length 251
(1) Service-Type = Framed-User
(1) Framed-Protocol = PPP
(1) NAS-Port = 15728757
(1) NAS-Port-Type = Ethernet
(1) User-Name = "77777"
(1) Calling-Station-Id = "C0:25:E9:4B:81:2D"
(1) Called-Station-Id = "PPPOE4"
(1) NAS-Port-Id = "ether4"
(1) Acct-Session-Id = "81700075"
(1) Framed-IP-Address = 10.104.255.254
(1) Acct-Authentic = RADIUS
(1) Event-Timestamp = "Aug 17 2022 15:26:56 EEST"
(1) Acct-Session-Time = 7800
(1) Idle-Timeout = 0
(1) Session-Timeout = 0
(1) X-Ascend-Data-Rate = 8192000
(1) Ascend-Xmit-Rate = 8192000
(1) X-Ascend-Data-Rate = 4096000
(1) Ascend-Data-Rate = 4096000
(1) Mikrotik-Rate-Limit = "4096k/8192k"
(1) Acct-Input-Octets = 44806899
(1) Acct-Input-Gigawords = 0
(1) Acct-Input-Packets = 201912
(1) Acct-Output-Octets = 441097942
(1) Acct-Output-Gigawords = 0
(1) Acct-Output-Packets = 385525
(1) Acct-Status-Type = Interim-Update
(1) NAS-Identifier = "RouterOS"
(1) Acct-Delay-Time = 3
(1) NAS-IP-Address = 192.168.254.1
(1) # Executing section preacct from file
/usr/local/etc/raddb/sites-enabled/default
(1) preacct {
(1) [preprocess] = ok
(1) policy acct_unique {
(1) update request {
(1) &Tmp-String-9 := "ai:"
(1) } # update request = noop
(1) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(1) EXPAND %{hex:&Class}
(1) -->
(1) EXPAND ^%{hex:&Tmp-String-9}
(1) --> ^61693a
(1) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
(1) else {
(1) update request {
(1) EXPAND
%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(1) --> 90620c7a1206e21d1265ddec0517ba1e
(1) &Acct-Unique-Session-Id := 90620c7a1206e21d1265ddec0517ba1e
(1) } # update request = noop
(1) } # else = noop
(1) update request {
(1) &Tmp-String-9 !* ANY
(1) } # update request = noop
(1) } # policy acct_unique = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "77777", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) [files] = noop
(1) } # preacct = ok
(1) # Executing section accounting from file
/usr/local/etc/raddb/sites-enabled/default
(1) accounting {
(1) [unix] = noop
rlm_sql (sql): Reserved connection (1)
(1) sqlippool: EXPAND %{User-Name}
(1) sqlippool: --> 77777
(1) sqlippool: SQL-User-Name set to '77777'
(1) sqlippool: EXPAND UPDATE radippool SET expiry_time = NOW() + INTERVAL
1210 SECOND WHERE nasipaddress =
'%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
AND username = '%{User-Name}' AND callingstationid =
'%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'
(1) sqlippool: --> UPDATE radippool SET expiry_time = NOW() + INTERVAL
1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key = '15728757'
AND username = '77777' AND callingstationid = 'C0:25:E9:4B:81:2D' AND
framedipaddress = '10.104.255.254'
(1) sqlippool: Executing query: UPDATE radippool SET expiry_time = NOW() +
INTERVAL 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key =
'15728757' AND username = '77777' AND callingstationid =
'C0:25:E9:4B:81:2D' AND framedipaddress = '10.104.255.254'
rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0
rlm_sql (sql): Released connection (1)
Need 1 more connections to reach min connections (3)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (7), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.7.39, protocol version 10
(1) [sqlippool] = notfound
(1) } # accounting = notfound
(1) Not sending reply to client.
(1) Finished request
(1) Cleaning up request packet ID 141 with timestamp +227 due to done
Ready to process requests
(2) Received Accounting-Request Id 141 from 192.168.254.1:45922 to
192.168.254.3:1813 length 251
(2) Service-Type = Framed-User
(2) Framed-Protocol = PPP
(2) NAS-Port = 15728757
(2) NAS-Port-Type = Ethernet
(2) User-Name = "77777"
(2) Calling-Station-Id = "C0:25:E9:4B:81:2D"
(2) Called-Station-Id = "PPPOE4"
(2) NAS-Port-Id = "ether4"
(2) Acct-Session-Id = "81700075"
(2) Framed-IP-Address = 10.104.255.254
(2) Acct-Authentic = RADIUS
(2) Event-Timestamp = "Aug 17 2022 15:26:56 EEST"
(2) Acct-Session-Time = 7800
(2) Idle-Timeout = 0
(2) Session-Timeout = 0
(2) X-Ascend-Data-Rate = 8192000
(2) Ascend-Xmit-Rate = 8192000
(2) X-Ascend-Data-Rate = 4096000
(2) Ascend-Data-Rate = 4096000
(2) Mikrotik-Rate-Limit = "4096k/8192k"
(2) Acct-Input-Octets = 44806899
(2) Acct-Input-Gigawords = 0
(2) Acct-Input-Packets = 201912
(2) Acct-Output-Octets = 441097942
(2) Acct-Output-Gigawords = 0
(2) Acct-Output-Packets = 385525
(2) Acct-Status-Type = Interim-Update
(2) NAS-Identifier = "RouterOS"
(2) Acct-Delay-Time = 6
(2) NAS-IP-Address = 192.168.254.1
(2) # Executing section preacct from file
/usr/local/etc/raddb/sites-enabled/default
(2) preacct {
(2) [preprocess] = ok
(2) policy acct_unique {
(2) update request {
(2) &Tmp-String-9 := "ai:"
(2) } # update request = noop
(2) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
(2) EXPAND %{hex:&Class}
(2) -->
(2) EXPAND ^%{hex:&Tmp-String-9}
(2) --> ^61693a
(2) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
(2) else {
(2) update request {
(2) EXPAND
%{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
(2) --> 90620c7a1206e21d1265ddec0517ba1e
(2) &Acct-Unique-Session-Id := 90620c7a1206e21d1265ddec0517ba1e
(2) } # update request = noop
(2) } # else = noop
(2) update request {
(2) &Tmp-String-9 !* ANY
(2) } # update request = noop
(2) } # policy acct_unique = noop
(2) suffix: Checking for suffix after "@"
(2) suffix: No '@' in User-Name = "77777", looking up realm NULL
(2) suffix: No such realm "NULL"
(2) [suffix] = noop
(2) [files] = noop
(2) } # preacct = ok
(2) # Executing section accounting from file
/usr/local/etc/raddb/sites-enabled/default
(2) accounting {
(2) [unix] = noop
rlm_sql (sql): Reserved connection (6)
(2) sqlippool: EXPAND %{User-Name}
(2) sqlippool: --> 77777
(2) sqlippool: SQL-User-Name set to '77777'
(2) sqlippool: EXPAND UPDATE radippool SET expiry_time = NOW() + INTERVAL
1210 SECOND WHERE nasipaddress =
'%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
AND username = '%{User-Name}' AND callingstationid =
'%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'
(2) sqlippool: --> UPDATE radippool SET expiry_time = NOW() + INTERVAL
1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key = '15728757'
AND username = '77777' AND callingstationid = 'C0:25:E9:4B:81:2D' AND
framedipaddress = '10.104.255.254'
(2) sqlippool: Executing query: UPDATE radippool SET expiry_time = NOW() +
INTERVAL 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key =
'15728757' AND username = '77777' AND callingstationid =
'C0:25:E9:4B:81:2D' AND framedipaddress = '10.104.255.254'
rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0
rlm_sql (sql): Released connection (6)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (8), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket,
server version 5.7.39, protocol version 10
(2) [sqlippool] = notfound
(2) } # accounting = notfound
(2) Not sending reply to client.
(2) Finished request
(2) Cleaning up request packet ID 141 with timestamp +230 due to done
Ready to process requests
On Wed, 17 Aug 2022 at 15:20, mohammed Irheem <mohammed059 at gmail.com> wrote:
> FreeRADIUS Version 3.2.0
> Copyright (C) 1999-2021 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/local/share/freeradius/dictionary
> including dictionary file /usr/local/share/freeradius/dictionary.dhcp
> including dictionary file /usr/local/share/freeradius/dictionary.vqp
> including dictionary file /usr/local/etc/raddb/dictionary
> including configuration file /usr/local/etc/raddb/radiusd.conf
> including configuration file /usr/local/etc/raddb/proxy.conf
> including configuration file /usr/local/etc/raddb/clients.conf
> including configuration file /usr/local/etc/raddb/mods-enabled/sql
> including configuration file
> /usr/local/etc/raddb/mods-config/sql/main/mysql/queries.conf
> including files in directory /usr/local/etc/raddb/mods-enabled/
> including configuration file /usr/local/etc/raddb/mods-enabled/always
> including configuration file /usr/local/etc/raddb/mods-enabled/attr_filter
> including configuration file /usr/local/etc/raddb/mods-enabled/chap
> including configuration file /usr/local/etc/raddb/mods-enabled/date
> including configuration file /usr/local/etc/raddb/mods-enabled/detail
> including configuration file /usr/local/etc/raddb/mods-enabled/detail.log
> including configuration file /usr/local/etc/raddb/mods-enabled/digest
> including configuration file
> /usr/local/etc/raddb/mods-enabled/dynamic_clients
> including configuration file /usr/local/etc/raddb/mods-enabled/eap
> including configuration file /usr/local/etc/raddb/mods-enabled/echo
> including configuration file /usr/local/etc/raddb/mods-enabled/exec
> including configuration file /usr/local/etc/raddb/mods-enabled/expiration
> including configuration file /usr/local/etc/raddb/mods-enabled/expr
> including configuration file /usr/local/etc/raddb/mods-enabled/files
> including configuration file /usr/local/etc/raddb/mods-enabled/linelog
> including configuration file /usr/local/etc/raddb/mods-enabled/logintime
> including configuration file /usr/local/etc/raddb/mods-enabled/mschap
> including configuration file /usr/local/etc/raddb/mods-enabled/ntlm_auth
> including configuration file /usr/local/etc/raddb/mods-enabled/pap
> including configuration file /usr/local/etc/raddb/mods-enabled/passwd
> including configuration file /usr/local/etc/raddb/mods-enabled/preprocess
> including configuration file /usr/local/etc/raddb/mods-enabled/radutmp
> including configuration file /usr/local/etc/raddb/mods-enabled/realm
> including configuration file /usr/local/etc/raddb/mods-enabled/replicate
> including configuration file /usr/local/etc/raddb/mods-enabled/soh
> including configuration file /usr/local/etc/raddb/mods-enabled/sradutmp
> including configuration file /usr/local/etc/raddb/mods-enabled/totp
> including configuration file /usr/local/etc/raddb/mods-enabled/unix
> including configuration file /usr/local/etc/raddb/mods-enabled/unpack
> including configuration file /usr/local/etc/raddb/mods-enabled/utf8
> including configuration file /usr/local/etc/raddb/mods-enabled/sqlippool
> including configuration file
> /usr/local/etc/raddb/mods-config/sql/ippool/mysql/queries.conf
> including files in directory /usr/local/etc/raddb/policy.d/
> including configuration file /usr/local/etc/raddb/policy.d/abfab-tr
> including configuration file /usr/local/etc/raddb/policy.d/accounting
> including configuration file /usr/local/etc/raddb/policy.d/canonicalization
> including configuration file /usr/local/etc/raddb/policy.d/control
> including configuration file /usr/local/etc/raddb/policy.d/cui
> including configuration file /usr/local/etc/raddb/policy.d/debug
> including configuration file /usr/local/etc/raddb/policy.d/dhcp
> including configuration file /usr/local/etc/raddb/policy.d/eap
> including configuration file /usr/local/etc/raddb/policy.d/filter
> including configuration file
> /usr/local/etc/raddb/policy.d/moonshot-targeted-ids
> including configuration file /usr/local/etc/raddb/policy.d/operator-name
> including configuration file /usr/local/etc/raddb/policy.d/rfc7542
> including files in directory /usr/local/etc/raddb/sites-enabled/
> including configuration file /usr/local/etc/raddb/sites-enabled/default
> including configuration file
> /usr/local/etc/raddb/sites-enabled/inner-tunnel
> main {
> security {
> allow_core_dumps = no
> }
> name = "radiusd"
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> logdir = "/usr/local/var/log/radius"
> run_dir = "/usr/local/var/run/radiusd"
> }
> main {
> name = "radiusd"
> prefix = "/usr/local"
> localstatedir = "/usr/local/var"
> sbindir = "/usr/local/sbin"
> logdir = "/usr/local/var/log/radius"
> run_dir = "/usr/local/var/run/radiusd"
> libdir = "/usr/local/lib"
> radacctdir = "/usr/local/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> postauth_client_lost = no
> pidfile = "/usr/local/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/local/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = yes
> auth_badpass = yes
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> allow_vulnerable_openssl = "no"
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> recv_coa {
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> # Creating Auth-Type = mschap
> # Creating Auth-Type = digest
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Autz-Type = New-TLS-Connection
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_sql
> # Loading module "sql" from file /usr/local/etc/raddb/mods-enabled/sql
> sql {
> driver = "rlm_sql_mysql"
> server = "localhost"
> port = 3306
> login = "radius"
> password = <<< secret >>>
> radius_db = "radius"
> read_groups = yes
> read_profiles = yes
> read_clients = yes
> delete_stale_sessions = yes
> sql_user_name = "%{User-Name}"
> default_user_profile = ""
> client_query = "SELECT id, nasname, shortname, type, secret,
> server FROM nas"
> authorize_check_query = "SELECT id, username, attribute, value, op
> FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> authorize_reply_query = "SELECT id, username, attribute, value, op
> FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> authorize_group_check_query = "SELECT id, groupname, attribute,
> Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
> authorize_group_reply_query = "SELECT id, groupname, attribute,
> value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
> group_membership_query = "SELECT groupname FROM radusergroup WHERE
> username = '%{SQL-User-Name}' ORDER BY priority"
> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
> '%{SQL-User-Name}' AND acctstoptime IS NULL"
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> auto_escape = no
> accounting {
> reference =
> "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
> type {
> accounting-on {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
> }
> accounting-off {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
> }
> start {
> query = "INSERT INTO radacct (acctsessionid,
> acctuniqueid, username, realm,
> nasipaddress, nasportid, nasporttype,
> acctstarttime, acctupdatetime, acctstoptime,
> acctsessiontime, acctauthentic, connectinfo_start,
> connectinfo_stop, acctinputoctets, acctoutputoctets,
> calledstationid, callingstationid, acctterminatecause,
> servicetype, framedprotocol, framedipaddress,
> framedipv6address, framedipv6prefix, framedinterfaceid,
> delegatedipv6prefix ) VALUES ('%{Acct-Session-Id}',
> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}),
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0',
> '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
> '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}',
> '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}',
> '%{Delegated-IPv6-Prefix}' )"
> }
> interim-update {
> query = "UPDATE radacct SET acctupdatetime =
> (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval =
> %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old),
> framedipaddress = '%{Framed-IP-Address}', framedipv6address =
> '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}',
> framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix =
> '%{Delegated-IPv6-Prefix}', acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> '%{Acct-Unique-Session-Id}'"
> }
> stop {
> query = "UPDATE radacct SET acctstoptime =
> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> }
> }
> }
> post-auth {
> reference = ".query"
> query = "INSERT INTO radpostauth (username, pass, reply, authdate
> ) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> '%{reply:Packet-Type}', '%S.%M' )"
> }
> }
> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> linked
> Creating attribute SQL-Group
> # Loaded module rlm_always
> # Loading module "reject" from file
> /usr/local/etc/raddb/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file
> /usr/local/etc/raddb/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /usr/local/etc/raddb/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file
> /usr/local/etc/raddb/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file
> /usr/local/etc/raddb/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file
> /usr/local/etc/raddb/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file
> /usr/local/etc/raddb/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file
> /usr/local/etc/raddb/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file
> /usr/local/etc/raddb/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename =
> "/usr/local/etc/raddb/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename =
> "/usr/local/etc/raddb/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename =
> "/usr/local/etc/raddb/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename =
> "/usr/local/etc/raddb/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.coa" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.coa {
> filename = "/usr/local/etc/raddb/mods-config/attr_filter/coa"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /usr/local/etc/raddb/mods-enabled/chap
> # Loaded module rlm_date
> # Loading module "date" from file /usr/local/etc/raddb/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> utc = no
> }
> # Loading module "wispr2date" from file
> /usr/local/etc/raddb/mods-enabled/date
> date wispr2date {
> format = "%Y-%m-%dT%H:%M:%S"
> utc = no
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file
> /usr/local/etc/raddb/mods-enabled/detail
> detail {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "auth_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> detail auth_log {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> detail reply_log {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "/usr/local/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file
> /usr/local/etc/raddb/mods-enabled/digest
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /usr/local/etc/raddb/mods-enabled/dynamic_clients
> # Loaded module rlm_eap
> # Loading module "eap" from file /usr/local/etc/raddb/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_exec
> # Loading module "echo" from file /usr/local/etc/raddb/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loading module "exec" from file /usr/local/etc/raddb/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file
> /usr/local/etc/raddb/mods-enabled/expiration
> # Loaded module rlm_expr
> # Loading module "expr" from file /usr/local/etc/raddb/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_files
> # Loading module "files" from file
> /usr/local/etc/raddb/mods-enabled/files
> files {
> filename = "/usr/local/etc/raddb/mods-config/files/authorize"
> acctusersfile = "/usr/local/etc/raddb/mods-config/files/accounting"
> preproxy_usersfile =
> "/usr/local/etc/raddb/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file
> /usr/local/etc/raddb/mods-enabled/linelog
> linelog {
> filename = "/usr/local/var/log/radius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /usr/local/etc/raddb/mods-enabled/linelog
> linelog log_accounting {
> filename = "/usr/local/var/log/radius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file
> /usr/local/etc/raddb/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file
> /usr/local/etc/raddb/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loading module "ntlm_auth" from file
> /usr/local/etc/raddb/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /usr/local/etc/raddb/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file
> /usr/local/etc/raddb/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file
> /usr/local/etc/raddb/mods-enabled/preprocess
> preprocess {
> huntgroups =
> "/usr/local/etc/raddb/mods-config/preprocess/huntgroups"
> hints = "/usr/local/etc/raddb/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_radutmp
> # Loading module "radutmp" from file
> /usr/local/etc/raddb/mods-enabled/radutmp
> radutmp {
> filename = "/usr/local/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file
> /usr/local/etc/raddb/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file
> /usr/local/etc/raddb/mods-enabled/replicate
> # Loaded module rlm_soh
> # Loading module "soh" from file /usr/local/etc/raddb/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loading module "sradutmp" from file
> /usr/local/etc/raddb/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/usr/local/var/log/radius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_totp
> # Loading module "totp" from file /usr/local/etc/raddb/mods-enabled/totp
> # Loaded module rlm_unix
> # Loading module "unix" from file /usr/local/etc/raddb/mods-enabled/unix
> unix {
> radwtmp = "/usr/local/var/log/radius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_unpack
> # Loading module "unpack" from file
> /usr/local/etc/raddb/mods-enabled/unpack
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /usr/local/etc/raddb/mods-enabled/utf8
> # Loaded module rlm_sqlippool
> # Loading module "sqlippool" from file
> /usr/local/etc/raddb/mods-enabled/sqlippool
> sqlippool {
> sql_module_instance = "sql"
> lease_duration = 1210
> pool_name = "Pool-Name"
> default_pool = "main_pool"
> attribute_name = "Framed-IP-Address"
> req_attribute_name = "Framed-IP-Address"
> allocate_begin = "START TRANSACTION"
> allocate_clear = ""
> allocate_clear_timeout = 1
> allocate_existing = "SELECT framedipaddress FROM radippool WHERE
> pool_name = '%{control:Pool-Name}' AND nasipaddress = '%{NAS-IP-Address}'
> AND pool_key = '%{NAS-Port}' ORDER BY expiry_time DESC LIMIT 1 FOR UPDATE "
> allocate_requested = ""
> allocate_find = "SELECT framedipaddress FROM radippool WHERE
> pool_name = '%{control:Pool-Name}' AND expiry_time < NOW() ORDER BY
> expiry_time LIMIT 1 FOR UPDATE "
> allocate_update = "UPDATE radippool SET nasipaddress =
> '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid =
> '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() +
> INTERVAL 1210 SECOND WHERE framedipaddress = '%I'"
> allocate_commit = "COMMIT"
> pool_check = "SELECT id FROM radippool WHERE
> pool_name='%{control:Pool-Name}' LIMIT 1"
> start_begin = ""
> start_update = "UPDATE radippool SET expiry_time = NOW() +
> INTERVAL 1210 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key
> = '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid =
> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> start_commit = ""
> alive_begin = ""
> alive_update = "UPDATE radippool SET expiry_time = NOW() +
> INTERVAL 1210 SECOND WHERE nasipaddress =
> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
> AND username = '%{User-Name}' AND callingstationid =
> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> alive_commit = ""
> stop_begin = ""
> stop_clear = "UPDATE radippool SET expiry_time = NOW() WHERE
> nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key =
> '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid =
> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> stop_commit = ""
> on_begin = ""
> on_clear = "UPDATE radippool SET expiry_time = NOW() WHERE
> nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
> on_commit = ""
> off_begin = ""
> off_clear = "UPDATE radippool SET expiry_time = NOW() WHERE
> nasipaddress = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
> off_commit = ""
> messages {
> exists = "Existing IP: %{reply:Framed-IP-Address} (did
> %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
> %{User-Name})"
> success = "Allocated IP: %{reply:Framed-IP-Address} from
> %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id}
> port %{NAS-Port} user %{User-Name})"
> clear = "Released IP %{request:Framed-IP-Address} (did
> %{Called-Station-Id} cli %{Calling-Station-Id} user %{User-Name})"
> failed = "IP Allocation FAILED from %{control:Pool-Name} (did
> %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
> %{User-Name})"
> nopool = "No Pool-Name defined (did %{Called-Station-Id} cli
> %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
> }
> }
> instantiate {
> }
> # Instantiating module "sql" from file
> /usr/local/etc/raddb/mods-enabled/sql
> rlm_sql_mysql: libmysql version: 5.7.39
> mysql {
> tls {
> tls_required = no
> check_cert = no
> check_cert_cn = no
> }
> warnings = "auto"
> }
> rlm_sql (sql): Attempting to connect to database "radius"
> rlm_sql (sql): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> rlm_sql (sql): Processing generate_sql_clients
> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
> shortname, type, secret, server FROM nas
> rlm_sql (sql): Reserved connection (0)
> rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
> type, secret, server FROM nas
> rlm_sql (sql): Adding client 192.168.254.1 (Main BRAS) to global clients
> list
> rlm_sql (192.168.254.1): Client "Main BRAS" (sql) added
> rlm_sql (sql): Released connection (0)
> Need more connections to reach 10 spares
> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> # Instantiating module "reject" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "fail" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "ok" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "handled" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "invalid" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "userlock" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "notfound" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "noop" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "updated" from file
> /usr/local/etc/raddb/mods-enabled/always
> # Instantiating module "attr_filter.post-proxy" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file
> /usr/local/etc/raddb/mods-config/attr_filter/accounting_response
> # Instantiating module "attr_filter.coa" from file
> /usr/local/etc/raddb/mods-enabled/attr_filter
> reading pairlist file /usr/local/etc/raddb/mods-config/attr_filter/coa
> # Instantiating module "detail" from file
> /usr/local/etc/raddb/mods-enabled/detail
> # Instantiating module "auth_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /usr/local/etc/raddb/mods-enabled/detail.log
> # Instantiating module "eap" from file
> /usr/local/etc/raddb/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/usr/local/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/usr/local/etc/raddb/certs/server.pem"
> certificate_file = "/usr/local/etc/raddb/certs/server.pem"
> ca_file = "/usr/local/etc/raddb/certs/ca.pem"
> private_key_password = <<< secret >>>
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> ca_path_reload_interval = 0
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> reject_unknown_intermediate_ca = no
> ecdh_curve = ""
> tls_max_version = "1.2"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "expiration" from file
> /usr/local/etc/raddb/mods-enabled/expiration
> # Instantiating module "files" from file
> /usr/local/etc/raddb/mods-enabled/files
> reading pairlist file /usr/local/etc/raddb/mods-config/files/authorize
> reading pairlist file /usr/local/etc/raddb/mods-config/files/accounting
> reading pairlist file /usr/local/etc/raddb/mods-config/files/pre-proxy
> # Instantiating module "linelog" from file
> /usr/local/etc/raddb/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /usr/local/etc/raddb/mods-enabled/linelog
> # Instantiating module "logintime" from file
> /usr/local/etc/raddb/mods-enabled/logintime
> # Instantiating module "mschap" from file
> /usr/local/etc/raddb/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "pap" from file
> /usr/local/etc/raddb/mods-enabled/pap
> # Instantiating module "etc_passwd" from file
> /usr/local/etc/raddb/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "preprocess" from file
> /usr/local/etc/raddb/mods-enabled/preprocess
> reading pairlist file
> /usr/local/etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /usr/local/etc/raddb/mods-config/preprocess/hints
> # Instantiating module "IPASS" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "suffix" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "bangpath" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "ntdomain" from file
> /usr/local/etc/raddb/mods-enabled/realm
> # Instantiating module "sqlippool" from file
> /usr/local/etc/raddb/mods-enabled/sqlippool
> Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout
> = 1"
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /usr/local/etc/raddb/radiusd.conf
> } # server
> server default { # from file /usr/local/etc/raddb/sites-enabled/default
> # Loading authenticate {...}
> Compiling Auth-Type PAP for attr Auth-Type
> Compiling Auth-Type CHAP for attr Auth-Type
> Compiling Auth-Type MS-CHAP for attr Auth-Type
> # Loading authorize {...}
> Compiling Autz-Type New-TLS-Connection for attr Autz-Type
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
> Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
> } # server default
> server inner-tunnel { # from file
> /usr/local/etc/raddb/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> Compiling Auth-Type PAP for attr Auth-Type
> Compiling Auth-Type CHAP for attr Auth-Type
> Compiling Auth-Type MS-CHAP for attr Auth-Type
> # Loading authorize {...}
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' --
> /usr/local/etc/raddb/sites-enabled/inner-tunnel:336
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> } # server inner-tunnel
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on proxy address * port 41472
> Listening on proxy address :: port 34701
> Ready to process requests
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> (0) Received Accounting-Request Id 125 from 192.168.254.1:44619 to
> 192.168.254.3:1813 length 251
> (0) Service-Type = Framed-User
> (0) Framed-Protocol = PPP
> (0) NAS-Port = 15728742
> (0) NAS-Port-Type = Ethernet
> (0) User-Name = "77777"
> (0) Calling-Station-Id = "C0:25:E9:4B:81:2D"
> (0) Called-Station-Id = "PPPOE4"
> (0) NAS-Port-Id = "ether4"
> (0) Acct-Session-Id = "81700066"
> (0) Framed-IP-Address = 10.104.255.254
> (0) Acct-Authentic = RADIUS
> (0) Event-Timestamp = "Aug 15 2022 22:39:43 EEST"
> (0) Acct-Session-Time = 2101
> (0) Idle-Timeout = 0
> (0) Session-Timeout = 0
> (0) X-Ascend-Data-Rate = 8192000
> (0) Ascend-Xmit-Rate = 8192000
> (0) X-Ascend-Data-Rate = 4096000
> (0) Ascend-Data-Rate = 4096000
> (0) Mikrotik-Rate-Limit = "4096k/8192k"
> (0) Acct-Input-Octets = 23739108
> (0) Acct-Input-Gigawords = 0
> (0) Acct-Input-Packets = 174734
> (0) Acct-Output-Octets = 413363328
> (0) Acct-Output-Gigawords = 0
> (0) Acct-Output-Packets = 341681
> (0) Acct-Status-Type = Interim-Update
> (0) NAS-Identifier = "RouterOS"
> (0) Acct-Delay-Time = 0
> (0) NAS-IP-Address = 192.168.254.1
> (0) # Executing section preacct from file
> /usr/local/etc/raddb/sites-enabled/default
> (0) preacct {
> (0) [preprocess] = ok
> (0) policy acct_unique {
> (0) update request {
> (0) &Tmp-String-9 := "ai:"
> (0) } # update request = noop
> (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
> (0) EXPAND %{hex:&Class}
> (0) -->
> (0) EXPAND ^%{hex:&Tmp-String-9}
> (0) --> ^61693a
> (0) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
> (0) else {
> (0) update request {
> (0) EXPAND
> %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
> (0) --> cbc8a6edb364612de8b18f8e1512f0e7
> (0) &Acct-Unique-Session-Id := cbc8a6edb364612de8b18f8e1512f0e7
> (0) } # update request = noop
> (0) } # else = noop
> (0) update request {
> (0) &Tmp-String-9 !* ANY
> (0) } # update request = noop
> (0) } # policy acct_unique = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "77777", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) [files] = noop
> (0) } # preacct = ok
> (0) # Executing section accounting from file
> /usr/local/etc/raddb/sites-enabled/default
> (0) accounting {
> (0) [unix] = noop
> rlm_sql (sql): Reserved connection (1)
> (0) sqlippool: EXPAND %{User-Name}
> (0) sqlippool: --> 77777
> (0) sqlippool: SQL-User-Name set to '77777'
> (0) sqlippool: EXPAND UPDATE radippool SET expiry_time = NOW() + INTERVAL
> 1210 SECOND WHERE nasipaddress =
> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
> AND username = '%{User-Name}' AND callingstationid =
> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'
> (0) sqlippool: --> UPDATE radippool SET expiry_time = NOW() + INTERVAL
> 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key = '15728742'
> AND username = '77777' AND callingstationid = 'C0:25:E9:4B:81:2D' AND
> framedipaddress = '10.104.255.254'
> (0) sqlippool: Executing query: UPDATE radippool SET expiry_time = NOW() +
> INTERVAL 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key =
> '15728742' AND username = '77777' AND callingstationid =
> 'C0:25:E9:4B:81:2D' AND framedipaddress = '10.104.255.254'
> rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0
> rlm_sql (sql): Released connection (1)
> Need more connections to reach 10 spares
> rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> rlm_sql (sql): Closing expired connection (5) - Hit idle_timeout limit
> rlm_sql_mysql: Socket destructor called, closing socket
> rlm_sql (sql): Closing expired connection (4) - Hit idle_timeout limit
> rlm_sql_mysql: Socket destructor called, closing socket
> rlm_sql (sql): Closing expired connection (3) - Hit idle_timeout limit
> rlm_sql_mysql: Socket destructor called, closing socket
> rlm_sql (sql): Closing expired connection (2) - Hit idle_timeout limit
> rlm_sql_mysql: Socket destructor called, closing socket
> rlm_sql (sql): You probably need to lower "min"
> rlm_sql (sql): Closing expired connection (0) - Hit idle_timeout limit
> rlm_sql_mysql: Socket destructor called, closing socket
> (0) [sqlippool] = notfound
> (0) } # accounting = notfound
> (0) Not sending reply to client.
> (0) Finished request
> (0) Cleaning up request packet ID 125 with timestamp +271 due to done
> Ready to process requests
> (1) Received Accounting-Request Id 125 from 192.168.254.1:44619 to
> 192.168.254.3:1813 length 251
> (1) Service-Type = Framed-User
> (1) Framed-Protocol = PPP
> (1) NAS-Port = 15728742
> (1) NAS-Port-Type = Ethernet
> (1) User-Name = "77777"
> (1) Calling-Station-Id = "C0:25:E9:4B:81:2D"
> (1) Called-Station-Id = "PPPOE4"
> (1) NAS-Port-Id = "ether4"
> (1) Acct-Session-Id = "81700066"
> (1) Framed-IP-Address = 10.104.255.254
> (1) Acct-Authentic = RADIUS
> (1) Event-Timestamp = "Aug 15 2022 22:39:43 EEST"
> (1) Acct-Session-Time = 2101
> (1) Idle-Timeout = 0
> (1) Session-Timeout = 0
> (1) X-Ascend-Data-Rate = 8192000
> (1) Ascend-Xmit-Rate = 8192000
> (1) X-Ascend-Data-Rate = 4096000
> (1) Ascend-Data-Rate = 4096000
> (1) Mikrotik-Rate-Limit = "4096k/8192k"
> (1) Acct-Input-Octets = 23739108
> (1) Acct-Input-Gigawords = 0
> (1) Acct-Input-Packets = 174734
> (1) Acct-Output-Octets = 413363328
> (1) Acct-Output-Gigawords = 0
> (1) Acct-Output-Packets = 341681
> (1) Acct-Status-Type = Interim-Update
> (1) NAS-Identifier = "RouterOS"
> (1) Acct-Delay-Time = 3
> (1) NAS-IP-Address = 192.168.254.1
> (1) # Executing section preacct from file
> /usr/local/etc/raddb/sites-enabled/default
> (1) preacct {
> (1) [preprocess] = ok
> (1) policy acct_unique {
> (1) update request {
> (1) &Tmp-String-9 := "ai:"
> (1) } # update request = noop
> (1) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
> (1) EXPAND %{hex:&Class}
> (1) -->
> (1) EXPAND ^%{hex:&Tmp-String-9}
> (1) --> ^61693a
> (1) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
> (1) else {
> (1) update request {
> (1) EXPAND
> %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
> (1) --> cbc8a6edb364612de8b18f8e1512f0e7
> (1) &Acct-Unique-Session-Id := cbc8a6edb364612de8b18f8e1512f0e7
> (1) } # update request = noop
> (1) } # else = noop
> (1) update request {
> (1) &Tmp-String-9 !* ANY
> (1) } # update request = noop
> (1) } # policy acct_unique = noop
> (1) suffix: Checking for suffix after "@"
> (1) suffix: No '@' in User-Name = "77777", looking up realm NULL
> (1) suffix: No such realm "NULL"
> (1) [suffix] = noop
> (1) [files] = noop
> (1) } # preacct = ok
> (1) # Executing section accounting from file
> /usr/local/etc/raddb/sites-enabled/default
> (1) accounting {
> (1) [unix] = noop
> rlm_sql (sql): Reserved connection (1)
> (1) sqlippool: EXPAND %{User-Name}
> (1) sqlippool: --> 77777
> (1) sqlippool: SQL-User-Name set to '77777'
> (1) sqlippool: EXPAND UPDATE radippool SET expiry_time = NOW() + INTERVAL
> 1210 SECOND WHERE nasipaddress =
> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
> AND username = '%{User-Name}' AND callingstationid =
> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'
> (1) sqlippool: --> UPDATE radippool SET expiry_time = NOW() + INTERVAL
> 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key = '15728742'
> AND username = '77777' AND callingstationid = 'C0:25:E9:4B:81:2D' AND
> framedipaddress = '10.104.255.254'
> (1) sqlippool: Executing query: UPDATE radippool SET expiry_time = NOW() +
> INTERVAL 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key =
> '15728742' AND username = '77777' AND callingstationid =
> 'C0:25:E9:4B:81:2D' AND framedipaddress = '10.104.255.254'
> rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0
> rlm_sql (sql): Released connection (1)
> Need 1 more connections to reach min connections (3)
> Need more connections to reach 10 spares
> rlm_sql (sql): Opening additional connection (7), 1 of 30 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> (1) [sqlippool] = notfound
> (1) } # accounting = notfound
> (1) Not sending reply to client.
> (1) Finished request
> (1) Cleaning up request packet ID 125 with timestamp +274 due to done
> Ready to process requests
> (2) Received Accounting-Request Id 125 from 192.168.254.1:44619 to
> 192.168.254.3:1813 length 251
> (2) Service-Type = Framed-User
> (2) Framed-Protocol = PPP
> (2) NAS-Port = 15728742
> (2) NAS-Port-Type = Ethernet
> (2) User-Name = "77777"
> (2) Calling-Station-Id = "C0:25:E9:4B:81:2D"
> (2) Called-Station-Id = "PPPOE4"
> (2) NAS-Port-Id = "ether4"
> (2) Acct-Session-Id = "81700066"
> (2) Framed-IP-Address = 10.104.255.254
> (2) Acct-Authentic = RADIUS
> (2) Event-Timestamp = "Aug 15 2022 22:39:43 EEST"
> (2) Acct-Session-Time = 2101
> (2) Idle-Timeout = 0
> (2) Session-Timeout = 0
> (2) X-Ascend-Data-Rate = 8192000
> (2) Ascend-Xmit-Rate = 8192000
> (2) X-Ascend-Data-Rate = 4096000
> (2) Ascend-Data-Rate = 4096000
> (2) Mikrotik-Rate-Limit = "4096k/8192k"
> (2) Acct-Input-Octets = 23739108
> (2) Acct-Input-Gigawords = 0
> (2) Acct-Input-Packets = 174734
> (2) Acct-Output-Octets = 413363328
> (2) Acct-Output-Gigawords = 0
> (2) Acct-Output-Packets = 341681
> (2) Acct-Status-Type = Interim-Update
> (2) NAS-Identifier = "RouterOS"
> (2) Acct-Delay-Time = 6
> (2) NAS-IP-Address = 192.168.254.1
> (2) # Executing section preacct from file
> /usr/local/etc/raddb/sites-enabled/default
> (2) preacct {
> (2) [preprocess] = ok
> (2) policy acct_unique {
> (2) update request {
> (2) &Tmp-String-9 := "ai:"
> (2) } # update request = noop
> (2) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) {
> (2) EXPAND %{hex:&Class}
> (2) -->
> (2) EXPAND ^%{hex:&Tmp-String-9}
> (2) --> ^61693a
> (2) if (("%{hex:&Class}" =~ /^%{hex:&Tmp-String-9}/) &&
> ("%{string:&Class}" =~ /^ai:([0-9a-f]{32})/i)) -> FALSE
> (2) else {
> (2) update request {
> (2) EXPAND
> %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6-Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}}
> (2) --> cbc8a6edb364612de8b18f8e1512f0e7
> (2) &Acct-Unique-Session-Id := cbc8a6edb364612de8b18f8e1512f0e7
> (2) } # update request = noop
> (2) } # else = noop
> (2) update request {
> (2) &Tmp-String-9 !* ANY
> (2) } # update request = noop
> (2) } # policy acct_unique = noop
> (2) suffix: Checking for suffix after "@"
> (2) suffix: No '@' in User-Name = "77777", looking up realm NULL
> (2) suffix: No such realm "NULL"
> (2) [suffix] = noop
> (2) [files] = noop
> (2) } # preacct = ok
> (2) # Executing section accounting from file
> /usr/local/etc/raddb/sites-enabled/default
> (2) accounting {
> (2) [unix] = noop
> rlm_sql (sql): Reserved connection (6)
> (2) sqlippool: EXPAND %{User-Name}
> (2) sqlippool: --> 77777
> (2) sqlippool: SQL-User-Name set to '77777'
> (2) sqlippool: EXPAND UPDATE radippool SET expiry_time = NOW() + INTERVAL
> 1210 SECOND WHERE nasipaddress =
> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
> AND username = '%{User-Name}' AND callingstationid =
> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'
> (2) sqlippool: --> UPDATE radippool SET expiry_time = NOW() + INTERVAL
> 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key = '15728742'
> AND username = '77777' AND callingstationid = 'C0:25:E9:4B:81:2D' AND
> framedipaddress = '10.104.255.254'
> (2) sqlippool: Executing query: UPDATE radippool SET expiry_time = NOW() +
> INTERVAL 1210 SECOND WHERE nasipaddress = '192.168.254.1' AND pool_key =
> '15728742' AND username = '77777' AND callingstationid =
> 'C0:25:E9:4B:81:2D' AND framedipaddress = '10.104.255.254'
> rlm_sql_mysql: Rows matched: 0 Changed: 0 Warnings: 0
> rlm_sql (sql): Released connection (6)
> Need more connections to reach 10 spares
> rlm_sql (sql): Opening additional connection (8), 1 of 29 pending slots
> used
> rlm_sql_mysql: Starting connect to MySQL server
> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> socket, server version 5.7.39, protocol version 10
> (2) [sqlippool] = notfound
> (2) } # accounting = notfound
> (2) Not sending reply to client.
> (2) Finished request
> (2) Cleaning up request packet ID 125 with timestamp +277 due to done
> Ready to process requests
>
> On Wed, 17 Aug 2022 at 15:17, Alan DeKok <aland at deployingradius.com>
> wrote:
>
>> On Aug 17, 2022, at 8:14 AM, mohammed Irheem <mohammed059 at gmail.com>
>> wrote:
>> >
>> > accounting record added successfully in radacct but after that there is
>> no
>> > update in this record
>>
>> Updates happen when the NAS sends accounting packets. If there are no
>> updated, then the NAS isn't sending accounting packets.
>>
>> > if i disconnect manually nas update the record
>> >
>> > in radius 3.0.21 updating acct every 5 minutes
>> > in 3.2 updating acct every 5 minutes if user ip from sqlippool only if i
>> > assign static ip for user update on acct record not working
>>
>> Well, debug it.
>>
>> "it doesn't work" is not something I can really help with.
>>
>> Alan DeKok.
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
More information about the Freeradius-Users
mailing list