Frerradius with M$ SQL-Problem with query.conf
Niko Reinhard
reiniko at web.de
Mon Aug 22 17:58:50 UTC 2022
We use Freeradius V3.0.17 on Cent OS7 since few years for AAA for our
Cisco devices. We stored the AVPs in our existing M$ SQL 2008R2 database
and connected it via Freetds and the unixodbc package from Freeradius.
Because Cisco AAA needs the Cleartext-Password and we don't want to
store it in cleartext in our database we wrote a simple small function
which decrypt/encrypt the password before storing and after reading.
Therefore we changed the "queries.conf" as follows:
SELECT id, UserName, Attribute,dbo.DecryptPwd(Value, Attribute) as
Value, op \
FROM ${authcheck_table} \
WHERE Username = '%{SQL-User-Name}' \
ORDER BY id"
This works fine without any problems.
Now we want to update our configuration and added a new server with
Oracle Linux 8 and Freeradius 3.2.0 (we installed with the sources and
as described at networkradius.com) in the same manner as we did before
(Freetds and freeradius-unixodbc) - but it works only if we use the
standard SQL query.
It does not work if we use the function or a View instead a table.
I tested our original query with tsql and isql and in both cases it
works fine. Then I installed Freeadius 3.0.25 and it works also not,
but no problem with isql and tsql.
I added the radiusd -X output on the end of the mail. As you can see
there is no output for the Cleartext-Password.
What am I doing wrong? Are there any additional settings after 3.0.17?
Can someone help me with this?
Thanks in advance!
Best regards
Niko
PS: There is an error in the file queries.conf at V3.0.25 from
networkradius.com, the new variable for Authorization query missed 2
dots (instead ${..conf it has to be ${....conf). I corrected it manually.
---
[root at rsp1radius1 ~]# radiusd -X
FreeRADIUS Version 3.0.25
Copyright (C) 1999-2021 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/totp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/sql
including configuration file
/etc/raddb/mods-config/sql/main/mssql/queries.conf
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/abfab-tr
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/moonshot-targeted-ids
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/rfc7542
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
security {
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
postauth_client_lost = no
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
allow_vulnerable_openssl = "no"
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
Debugger not attached
systemd watchdog is disabled
# Creating Auth-Type = mschap
# Creating Auth-Type = digest
# Creating Auth-Type = eap
# Creating Auth-Type = PAP
# Creating Auth-Type = CHAP
# Creating Auth-Type = MS-CHAP
# Creating Autz-Type = New-TLS-Connection
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.coa" from file
/etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.coa {
filename = "/etc/raddb/mods-config/attr_filter/coa"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_eap
# Loading module "eap" from file /etc/raddb/mods-enabled/eap
eap {
default_eap_type = "md5"
timer_expire = 60
ignore_unknown_eap_types = no
cisco_accounting_username_bug = no
max_sessions = 16384
}
# Loaded module rlm_exec
# Loading module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüa ÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "/var/log/radius/linelog"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_totp
# Loading module "totp" from file /etc/raddb/mods-enabled/totp
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_sql
# Loading module "sql" from file /etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_unixodbc"
server = "radiusDSN"
port = 0
login = "RSP\SIRASRV-RADIUS"
password = <<< secret >>>
radius_db = "freeradius"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id,nasname,shortname,type,secret FROM nas"
authorize_check_query = "SELECT id, UserName, Attribute,
dbo.DecryptPwd(Value,Attribute) as Value, op FROM radcheck WHERE
Username = '%{SQL-User-Name}' ORDER BY id"
authorize_reply_query = "SELECT id, UserName, Attribute,
dbo.DecryptPwd(Value,Attribute) as Value, op FROM radreply WHERE
Username = '%{SQL-User-Name}' ORDER BY id"
authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,
radgroupcheck.Attribute,radgroupcheck.Value, radgroupcheck.op FROM
radgroupcheck,radusergroup WHERE radusergroup.Username =
'%{SQL-User-Name}' AND radusergroup.GroupName = radgroupcheck.GroupName
ORDER BY radgroupcheck.id"
authorize_group_reply_query = "SELECT radgroupreply.id,
radgroupreply.GroupName, radgroupreply.Attribute,radgroupreply.Value,
radgroupreply.op FROM radgroupreply,radusergroup WHERE
radusergroup.Username = '%{SQL-User-Name}' AND radusergroup.GroupName =
radgroupreply.GroupName ORDER BY radgroupreply.id"
group_membership_query = "SELECT groupname FROM radusergroup WHERE
username = '%{SQL-User-Name}' ORDER BY priority"
safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
auto_escape = no
accounting {
reference =
"%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
type {
accounting-on {
query = "UPDATE radacct SET AcctStopTime=DATEADD(SS,
%{%{integer:Event-Timestamp}:-%l}, '19700101'),
AcctSessionTime=%{%{integer:Event-Timestamp}:-%l} - DATEDIFF(SS,
'1970-01-01', AcctStartTime),
AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}',
AcctStopDelay = %{%{Acct-Delay-Time}:-0} WHERE AcctStopTime = 0 AND
NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= DATEADD(SS,
%{%{integer:Event-Timestamp}:-%l}, '19700101')"
}
accounting-off {
query = "UPDATE radacct SET AcctStopTime=DATEADD(SS,
%{%{integer:Event-Timestamp}:-%l}, '19700101'),
AcctSessionTime=%{%{integer:Event-Timestamp}:-%l} - DATEDIFF(SS,
'1970-01-01', AcctStartTime),
AcctTerminateCause='%{%{Acct-Terminate-Cause}:-NAS-Reboot}',
AcctStopDelay = %{%{Acct-Delay-Time}:-0} WHERE AcctStopTime = 0 AND
NASIPAddress = '%{NAS-IP-Address}' AND AcctStartTime <= DATEADD(SS,
%{%{integer:Event-Timestamp}:-%l}, '19700101')"
}
start {
query = "INSERT INTO radacct ( AcctSessionId, AcctUniqueId,
UserName, Realm, NASIPAddress, NASPort, NASPortType, AcctStartTime,
AcctSessionTime, AcctAuthentic, ConnectInfo_start, ConnectInfo_stop,
AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId,
AcctTerminateCause, ServiceType, FramedProtocol, FramedIPAddress,
FramedIPv6Address, FramedIPv6Prefix, FramedInterfaceId,
DelegatedIPv6Prefix, AcctStartDelay, AcctStopDelay, XAscendSessionSvrKey
) VALUES('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}',
'%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', DATEADD(SS,
%{%{integer:Event-Timestamp}:-%l}, '19700101'), '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}',
'%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}',
'%{Delegated-IPv6-Prefix}', '%{Acct-Delay-Time}', '0',
'%{X-Ascend-Session-Svr-Key}' )"
}
interim-update {
query = "UPDATE radacct SET FramedIPAddress =
'%{Framed-IP-Address}', FramedIPv6Address = '%{Framed-IPv6-Address}',
FramedIPv6Prefix = '%{Framed-IPv6-Prefix}', FramedInterfaceId =
'%{Framed-Interface-Id}', DelegatedIPv6Prefix =
'%{Delegated-IPv6-Prefix}' WHERE AcctUniqueId =
'%{Acct-Unique-Session-ID}' AND AcctStopTime = 0"
}
stop {
query = "UPDATE radacct SET AcctStopTime = DATEADD(SS,
%{%{integer:Event-Timestamp}:-%l}, '19700101'), AcctSessionTime =
'%{Acct-Session-Time}', AcctInputOctets = convert(bigint,
'%{%{Acct-Input-Gigawords}:-0}' * POWER(2.0, 32)) |
'%{%{Acct-Input-Octets}:-0}', AcctOutputOctets = convert(bigint,
'%{%{Acct-Output-Gigawords}:-0}' * POWER(2.0, 32)) |
'%{%{Acct-Output-Octets}:-0}', AcctTerminateCause =
'%{Acct-Terminate-Cause}', AcctStopDelay = '%{%{Acct-Delay-Time}:-0}',
ConnectInfo_stop = '%{Connect-Info}' WHERE AcctUniqueId =
'%{Acct-Unique-Session-ID}' AND AcctStopTime = 0"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (userName, pass, reply, authdate )
VALUES('%{User-Name}', '%{%{User-Password}:-CHAP-PASSWORD}',
'%{reply:Packet-Type}', '%S.%{expr:%M / 1000}' )"
}
}
rlm_sql (sql): Driver rlm_sql_unixodbc (module rlm_sql_unixodbc) loaded
and linked
Creating attribute SQL-Group
instantiate {
}
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file
/etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file
/etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "attr_filter.coa" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/coa
# Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
loaded and linked
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
# Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
# Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
# Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
# Linked to sub-module rlm_eap_md5
# Linked to sub-module rlm_eap_gtc
gtc {
challenge = "Password: "
auth_type = "PAP"
}
# Linked to sub-module rlm_eap_tls
tls {
tls = "tls-common"
}
tls-config tls-common {
verify_depth = 0
ca_path = "/etc/raddb/certs"
pem_file_type = yes
private_key_file = "/etc/raddb/certs/server.pem"
certificate_file = "/etc/raddb/certs/server.pem"
ca_file = "/etc/raddb/certs/ca.pem"
private_key_password = <<< secret >>>
dh_file = "/etc/raddb/certs/dh"
fragment_size = 1024
include_length = yes
auto_chain = yes
check_crl = no
check_all_crl = no
ca_path_reload_interval = 0
cipher_list = "DEFAULT"
cipher_server_preference = no
reject_unknown_intermediate_ca = no
ecdh_curve = "prime256v1"
tls_max_version = "1.2"
tls_min_version = "1.2"
cache {
enable = no
lifetime = 24
max_entries = 255
}
verify {
skip_if_ocsp_ok = no
}
ocsp {
enable = no
override_cert_url = yes
url = "http://127.0.0.1/ocsp/"
use_nonce = yes
timeout = 0
softfail = no
}
}
# Linked to sub-module rlm_eap_ttls
ttls {
tls = "tls-common"
default_eap_type = "md5"
copy_request_to_tunnel = no
use_tunneled_reply = no
virtual_server = "inner-tunnel"
include_length = yes
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_peap
peap {
tls = "tls-common"
default_eap_type = "mschapv2"
copy_request_to_tunnel = no
use_tunneled_reply = no
proxy_tunneled_request_as_eap = yes
virtual_server = "inner-tunnel"
soh = no
require_client_cert = no
}
tls: Using cached TLS configuration from previous invocation
# Linked to sub-module rlm_eap_mschapv2
mschapv2 {
with_ntdomain_hack = no
send_error = no
}
# Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file
/etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
# Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
# Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
rlm_sql (sql): Attempting to connect to database "freeradius"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT
id,nasname,shortname,type,secret FROM nas
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT
id,nasname,shortname,type,secret FROM nas
rlm_sql (sql): Adding client localhost (localhost) to global clients list
rlm_sql (127.0.0.1): Client "localhost" (sql) added
rlm_sql (sql): Adding client 192.168.120.85 (ffm-r-test1) to global
clients list
rlm_sql (192.168.120.85): Client "ffm-r-test1" (sql) added
rlm_sql (sql): Adding client 192.168.120.86 (ffm-r-test2) to global
clients list
rlm_sql (192.168.120.86): Client "ffm-r-test2" (sql) added
rlm_sql (sql): Adding client 172.28.70.245 (rsp1radius1) to global
clients list
rlm_sql (172.28.70.245): Client "rsp1radius1" (sql) added
rlm_sql (sql): Released connection (0)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
Ignoring "ldap" (see raddb/mods-available/README.rst)
Compiling Autz-Type New-TLS-Connection for attr Autz-Type
# Loading preacct {...}
# Loading accounting {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
# Loading authenticate {...}
Compiling Auth-Type PAP for attr Auth-Type
Compiling Auth-Type CHAP for attr Auth-Type
Compiling Auth-Type MS-CHAP for attr Auth-Type
# Loading authorize {...}
# Loading session {...}
# Loading post-proxy {...}
# Loading post-auth {...}
# Skipping contents of 'if' as it is always 'false' --
/etc/raddb/sites-enabled/inner-tunnel:336
Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipv6addr = ::
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "auth"
ipaddr = 127.0.0.1
port = 18120
}
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 49597
Listening on proxy address :: port 49729
Ready to process requests
(0) Received Access-Request Id 15 from 127.0.0.1:33947 to 127.0.0.1:1812
length 79
(0) User-Name = "niklowitz"
(0) User-Password = "unify"
(0) NAS-IP-Address = 172.28.70.245
(0) NAS-Port = 1
(0) Message-Authenticator = 0xf27a95b7d7e310ac807bf655636530b0
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0) authorize {
(0) policy filter_username {
(0) if (&User-Name) {
(0) if (&User-Name) -> TRUE
(0) if (&User-Name) {
(0) if (&User-Name =~ / /) {
(0) if (&User-Name =~ / /) -> FALSE
(0) if (&User-Name =~ /@[^@]*@/ ) {
(0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(0) if (&User-Name =~ /\.\./ ) {
(0) if (&User-Name =~ /\.\./ ) -> FALSE
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
-> FALSE
(0) if (&User-Name =~ /\.$/) {
(0) if (&User-Name =~ /\.$/) -> FALSE
(0) if (&User-Name =~ /@\./) {
(0) if (&User-Name =~ /@\./) -> FALSE
(0) } # if (&User-Name) = notfound
(0) } # policy filter_username = notfound
(0) [preprocess] = ok
(0) [chap] = noop
(0) [mschap] = noop
(0) [digest] = noop
(0) suffix: Checking for suffix after "@"
(0) suffix: No '@' in User-Name = "niklowitz", looking up realm NULL
(0) suffix: No such realm "NULL"
(0) [suffix] = noop
(0) eap: No EAP-Message, not doing EAP
(0) [eap] = noop
(0) [files] = noop
(0) sql: EXPAND %{User-Name}
(0) sql: --> niklowitz
(0) sql: SQL-User-Name set to 'niklowitz'
rlm_sql (sql): Reserved connection (1)
(0) sql: EXPAND SELECT id, UserName, Attribute,
dbo.DecryptPwd(Value,Attribute) as Value, op FROM radcheck WHERE
Username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, UserName, Attribute,
dbo.DecryptPwd(Value,Attribute) as Value, op FROM radcheck WHERE
Username = 'niklowitz' ORDER BY id
(0) sql: Executing select query: SELECT id, UserName, Attribute,
dbo.DecryptPwd(Value,Attribute) as Value, op FROM radcheck WHERE
Username = 'niklowitz' ORDER BY id
(0) sql: User found in radcheck table
(0) sql: Conditional check items matched, merging assignment check items
(0) sql: Cleartext-Password := ""
(0) sql: EXPAND SELECT id, UserName, Attribute,
dbo.DecryptPwd(Value,Attribute) as Value, op FROM radreply WHERE
Username = '%{SQL-User-Name}' ORDER BY id
(0) sql: --> SELECT id, UserName, Attribute,
dbo.DecryptPwd(Value,Attribute) as Value, op FROM radreply WHERE
Username = 'niklowitz' ORDER BY id
(0) sql: Executing select query: SELECT id, UserName, Attribute,
dbo.DecryptPwd(Value,Attribute) as Value, op FROM radreply WHERE
Username = 'niklowitz' ORDER BY id
(0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(0) sql: --> SELECT groupname FROM radusergroup WHERE username =
'niklowitz' ORDER BY priority
(0) sql: Executing select query: SELECT groupname FROM radusergroup
WHERE username = 'niklowitz' ORDER BY priority
(0) sql: User found in the group table
(0) sql: EXPAND SELECT radgroupcheck.id,radgroupcheck.GroupName,
radgroupcheck.Attribute,radgroupcheck.Value, radgroupcheck.op FROM
radgroupcheck,radusergroup WHERE radusergroup.Username =
'%{SQL-User-Name}' AND radusergroup.GroupName = radgroupcheck.GroupName
ORDER BY radgroupcheck.id
(0) sql: --> SELECT radgroupcheck.id,radgroupcheck.GroupName,
radgroupcheck.Attribute,radgroupcheck.Value, radgroupcheck.op FROM
radgroupcheck,radusergroup WHERE radusergroup.Username = 'niklowitz' AND
radusergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id
(0) sql: Executing select query: SELECT
radgroupcheck.id,radgroupcheck.GroupName,
radgroupcheck.Attribute,radgroupcheck.Value, radgroupcheck.op FROM
radgroupcheck,radusergroup WHERE radusergroup.Username = 'niklowitz' AND
radusergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id
(0) sql: Group "administrators": Conditional check items matched
(0) sql: Group "administrators": Merging assignment check items
(0) sql: EXPAND SELECT radgroupreply.id, radgroupreply.GroupName,
radgroupreply.Attribute,radgroupreply.Value, radgroupreply.op FROM
radgroupreply,radusergroup WHERE radusergroup.Username =
'%{SQL-User-Name}' AND radusergroup.GroupName = radgroupreply.GroupName
ORDER BY radgroupreply.id
(0) sql: --> SELECT radgroupreply.id, radgroupreply.GroupName,
radgroupreply.Attribute,radgroupreply.Value, radgroupreply.op FROM
radgroupreply,radusergroup WHERE radusergroup.Username = 'niklowitz' AND
radusergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id
(0) sql: Executing select query: SELECT radgroupreply.id,
radgroupreply.GroupName, radgroupreply.Attribute,radgroupreply.Value,
radgroupreply.op FROM radgroupreply,radusergroup WHERE
radusergroup.Username = 'niklowitz' AND radusergroup.GroupName =
radgroupreply.GroupName ORDER BY radgroupreply.id
(0) sql: Group "administrators": Merging reply items
(0) sql: Service-Type := NAS-Prompt-User
(0) sql: Cisco-AVPair := "shell:priv-lvl=15"
rlm_sql (sql): Released connection (1)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
(0) [sql] = ok
(0) [expiration] = noop
(0) [logintime] = noop
(0) [pap] = updated
(0) } # authorize = updated
(0) Found Auth-Type = PAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Auth-Type PAP {
(0) pap: Login attempt with password
(0) pap: Comparing with "known good" Cleartext-Password
(0) pap: ERROR: Cleartext password does not match "known good" password
(0) pap: Passwords don't match
(0) [pap] = reject
(0) } # Auth-Type PAP = reject
(0) Failed to authenticate the user
(0) Using Post-Auth-Type Reject
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0) Post-Auth-Type REJECT {
(0) sql: EXPAND .query
(0) sql: --> .query
(0) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (2)
(0) sql: EXPAND %{User-Name}
(0) sql: --> niklowitz
(0) sql: SQL-User-Name set to 'niklowitz'
(0) sql: EXPAND INSERT INTO radpostauth (userName, pass, reply, authdate
) VALUES('%{User-Name}', '%{%{User-Password}:-CHAP-PASSWORD}',
'%{reply:Packet-Type}', '%S.%{expr:%M / 1000}' )
(0) sql: --> INSERT INTO radpostauth (userName, pass, reply, authdate
) VALUES('niklowitz', 'unify', 'Access-Reject', '2022-08-22 12:29:23.435' )
(0) sql: Executing query: INSERT INTO radpostauth (userName, pass,
reply, authdate ) VALUES('niklowitz', 'unify', 'Access-Reject',
'2022-08-22 12:29:23.435' )
(0) sql: SQL query returned: success
(0) sql: 1 record(s) updated
rlm_sql (sql): Released connection (2)
(0) [sql] = ok
(0) attr_filter.access_reject: EXPAND %{User-Name}
(0) attr_filter.access_reject: --> niklowitz
(0) attr_filter.access_reject: Matched entry DEFAULT at line 11
(0) [attr_filter.access_reject] = updated
(0) [eap] = noop
(0) policy remove_reply_message_if_eap {
(0) if (&reply:EAP-Message && &reply:Reply-Message) {
(0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(0) else {
(0) [noop] = noop
(0) } # else = noop
(0) } # policy remove_reply_message_if_eap = noop
(0) } # Post-Auth-Type REJECT = updated
(0) Delaying response for 1.000000 seconds
Waking up in 0.2 seconds.
Waking up in 0.7 seconds.
(0) Sending delayed response
(0) Sent Access-Reject Id 15 from 127.0.0.1:1812 to 127.0.0.1:33947
length 20
Waking up in 3.9 seconds.
More information about the Freeradius-Users
mailing list