FreeRadius and FreeIpa integration not working in our Lab setup
Michael Schwartzkopff
ms at sys4.de
Wed Jul 13 11:33:56 UTC 2022
On 13.07.22 12:59, Krishna Chaitanya wrote:
> Michael,
> The manual search is giving expected results but not sure why I am seeing 2
> search results.
> Please find the below radtest results along with the manual ldap search
> report.
>
> ================================================================
> [admin at freeradius raddb]$ ldapsearch -x uid=*krishnachaitanya*
> # extended LDIF
> #
> # LDAPv3
> # base <dc=qi-cap,dc=com> (default) with scope subtree
> # filter: uid=krishnachaitanya
> # requesting: ALL
> #
>
> # krishnachaitanya, users, compat, qi-cap.com
> dn: uid=krishnachaitanya,cn=users,cn=compat,dc=qi-cap,dc=com
> objectClass: posixAccount
> objectClass: ipaOverrideTarget
> objectClass: top
> gecos: Krishna Ala
> cn: Krishna Ala
> uidNumber: 1283800005
> gidNumber: 1283800005
> loginShell: /bin/sh
> homeDirectory: /home/krishnachaitanya
> ipaAnchorUUID::
> OklQQTpxaS1jYXAuY29tOmY1N2IxYTcyLWZlYjAtMTFlYy04MWYxLTA4MDAyNz
> M2ZWMzOQ==
> uid: krishnachaitanya
>
> # krishnachaitanya, users, accounts, qi-cap.com
> dn: uid=krishnachaitanya,cn=users,cn=accounts,dc=qi-cap,dc=com
> givenName: Krishna
> sn: Ala
> uid: krishnachaitanya
> cn: Krishna Ala
> displayName: Krishna Ala
> initials: KA
> gecos: Krishna Ala
> objectClass: top
> objectClass: person
> objectClass: organizationalperson
> objectClass: inetorgperson
> objectClass: inetuser
> objectClass: posixaccount
> objectClass: krbprincipalaux
> objectClass: krbticketpolicyaux
> objectClass: ipaobject
> objectClass: ipasshuser
> objectClass: ipaSshGroupOfPubKeys
> objectClass: mepOriginEntry
> objectClass: ipantuserattrs
> loginShell: /bin/sh
> homeDirectory: /home/krishnachaitanya
> uidNumber: 1283800005
> gidNumber: 1283800005
> ipaNTSecurityIdentifier: S-1-5-21-2716401607-2924185208-1841578509-1005
>
> # search result
> search: 2
> result: 0 Success
>
> # numResponses: 3
> # numEntries: 2
> ===============================================================================================
> [root at freeradius admin]# radiusd -X
> FreeRADIUS Version 3.0.21
> Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/raddb/dictionary
> including configuration file /etc/raddb/radiusd.conf
> including configuration file /etc/raddb/proxy.conf
> including configuration file /etc/raddb/clients.conf
> including files in directory /etc/raddb/mods-enabled/
> including configuration file /etc/raddb/mods-enabled/always
> including configuration file /etc/raddb/mods-enabled/attr_filter
> including configuration file /etc/raddb/mods-enabled/cache_eap
> including configuration file /etc/raddb/mods-enabled/chap
> including configuration file /etc/raddb/mods-enabled/date
> including configuration file /etc/raddb/mods-enabled/detail
> including configuration file /etc/raddb/mods-enabled/detail.log
> including configuration file /etc/raddb/mods-enabled/digest
> including configuration file /etc/raddb/mods-enabled/dynamic_clients
> including configuration file /etc/raddb/mods-enabled/eap
> including configuration file /etc/raddb/mods-enabled/echo
> including configuration file /etc/raddb/mods-enabled/exec
> including configuration file /etc/raddb/mods-enabled/expiration
> including configuration file /etc/raddb/mods-enabled/expr
> including configuration file /etc/raddb/mods-enabled/files
> including configuration file /etc/raddb/mods-enabled/linelog
> including configuration file /etc/raddb/mods-enabled/logintime
> including configuration file /etc/raddb/mods-enabled/mschap
> including configuration file /etc/raddb/mods-enabled/ntlm_auth
> including configuration file /etc/raddb/mods-enabled/pap
> including configuration file /etc/raddb/mods-enabled/passwd
> including configuration file /etc/raddb/mods-enabled/preprocess
> including configuration file /etc/raddb/mods-enabled/radutmp
> including configuration file /etc/raddb/mods-enabled/realm
> including configuration file /etc/raddb/mods-enabled/replicate
> including configuration file /etc/raddb/mods-enabled/soh
> including configuration file /etc/raddb/mods-enabled/sradutmp
> including configuration file /etc/raddb/mods-enabled/unix
> including configuration file /etc/raddb/mods-enabled/unpack
> including configuration file /etc/raddb/mods-enabled/utf8
> including configuration file /etc/raddb/mods-enabled/ldap
> including files in directory /etc/raddb/policy.d/
> including configuration file /etc/raddb/policy.d/accounting
> including configuration file /etc/raddb/policy.d/canonicalization
> including configuration file /etc/raddb/policy.d/control
> including configuration file /etc/raddb/policy.d/cui
> including configuration file /etc/raddb/policy.d/debug
> including configuration file /etc/raddb/policy.d/dhcp
> including configuration file /etc/raddb/policy.d/eap
> including configuration file /etc/raddb/policy.d/filter
> including configuration file /etc/raddb/policy.d/operator-name
> including configuration file /etc/raddb/policy.d/rfc7542
> including files in directory /etc/raddb/sites-enabled/
> including configuration file /etc/raddb/sites-enabled/default
> including configuration file /etc/raddb/sites-enabled/inner-tunnel
> main {
> security {
> user = "radiusd"
> group = "radiusd"
> allow_core_dumps = no
> }
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> }
> main {
> name = "radiusd"
> prefix = "/usr"
> localstatedir = "/var"
> sbindir = "/usr/sbin"
> logdir = "/var/log/radius"
> run_dir = "/var/run/radiusd"
> libdir = "/usr/lib64/freeradius"
> radacctdir = "/var/log/radius/radacct"
> hostname_lookups = no
> max_request_time = 30
> cleanup_delay = 5
> max_requests = 16384
> pidfile = "/var/run/radiusd/radiusd.pid"
> checkrad = "/usr/sbin/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 122.1.5.84
> require_message_authenticator = no
> secret = <<< secret >>>
> nas_type = "other"
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> client localhost_ipv6 {
> ipv6addr = ::1
> require_message_authenticator = no
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debugger not attached
> # Creating Auth-Type = mschap
> # Creating Auth-Type = digest
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Auth-Type = LDAP
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/raddb/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/raddb/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/raddb/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/raddb/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/raddb/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/raddb/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/raddb/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/raddb/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/raddb/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /etc/raddb/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_cache
> # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
> cache cache_eap {
> driver = "rlm_cache_rbtree"
> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> ttl = 15
> max_entries = 0
> epoch = 0
> add_stats = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/raddb/mods-enabled/chap
> # Loaded module rlm_date
> # Loading module "date" from file /etc/raddb/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> utc = no
> }
> # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
> date wispr2date {
> format = "%Y-%m-%dT%H:%M:%S"
> utc = no
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file /etc/raddb/mods-enabled/detail
> detail {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
> detail auth_log {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
> detail reply_log {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/raddb/mods-enabled/digest
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /etc/raddb/mods-enabled/dynamic_clients
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/raddb/mods-enabled/eap
> eap {
> default_eap_type = "md5"
> timer_expire = 60
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> }
> # Loaded module rlm_exec
> # Loading module "echo" from file /etc/raddb/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loading module "exec" from file /etc/raddb/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/raddb/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/raddb/mods-enabled/files
> files {
> filename = "/etc/raddb/mods-config/files/authorize"
> acctusersfile = "/etc/raddb/mods-config/files/accounting"
> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
> linelog {
> filename = "/var/log/radius/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /etc/raddb/mods-enabled/linelog
> linelog log_accounting {
> filename = "/var/log/radius/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> --username=%{mschap:User-Name} --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/raddb/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
> hints = "/etc/raddb/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_radutmp
> # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
> radutmp {
> filename = "/var/log/radius/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/raddb/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "/var/log/radius/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/raddb/mods-enabled/unix
> unix {
> radwtmp = "/var/log/radius/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
> # Loaded module rlm_ldap
> # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
> ldap {
> server = "122.1.5.84"
> sasl {
> }
> user_dn = "LDAP-UserDn"
> user {
> scope = "sub"
> access_positive = yes
> sasl {
> }
> }
> group {
> filter = "(objectClass=posixGroup)"
> scope = "sub"
> name_attribute = "cn"
> membership_attribute = "memberOf"
> cacheable_name = no
> cacheable_dn = no
> allow_dangling_group_ref = no
> }
> client {
> filter = "(objectClass=radiusClient)"
> scope = "sub"
> base_dn = "O=QI-CAP.COM,CN=Certificate
> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com"
> }
> profile {
> }
> options {
> ldap_debug = 40
> chase_referrals = yes
> rebind = yes
> net_timeout = 1
> res_timeout = 10
> srv_timelimit = 3
> idle = 60
> probes = 3
> interval = 3
> }
> tls {
> start_tls = no
> }
> }
> Creating attribute LDAP-Group
> instantiate {
> }
> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
> # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
> # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
> # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
> # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
> # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
> # Instantiating module "attr_filter.post-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /etc/raddb/mods-enabled/attr_filter
> reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
> # Instantiating module "cache_eap" from file
> /etc/raddb/mods-enabled/cache_eap
> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> loaded and linked
> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
> # Instantiating module "auth_log" from file
> /etc/raddb/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /etc/raddb/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /etc/raddb/mods-enabled/detail.log
> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_leap
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/raddb/certs"
> pem_file_type = yes
> private_key_file = "/etc/raddb/certs/server.pem"
> certificate_file = "/etc/raddb/certs/server.pem"
> ca_file = "/etc/raddb/certs/ca.pem"
> private_key_password = <<< secret >>>
> dh_file = "/etc/raddb/certs/dh"
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> ca_path_reload_interval = 0
> cipher_list = "PROFILE=SYSTEM"
> cipher_server_preference = no
> reject_unknown_intermediate_ca = no
> ecdh_curve = "prime256v1"
> disable_tlsv1 = yes
> disable_tlsv1_1 = yes
> tls_max_version = "1.2"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> tls: Please use 'tls_min_version' and 'tls_max_version' instead of
> 'disable_tlsv1'
> tls: Please use 'tls_min_version' and 'tls_max_version' instead of
> 'disable_tlsv1_1'
> tls: Setting DH parameters from /etc/raddb/certs/dh - this is no longer
> necessary.
> tls: You should comment out the 'dh_file' configuration item.
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "expiration" from file
> /etc/raddb/mods-enabled/expiration
> # Instantiating module "files" from file /etc/raddb/mods-enabled/files
> reading pairlist file /etc/raddb/mods-config/files/authorize
> reading pairlist file /etc/raddb/mods-config/files/accounting
> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
> # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /etc/raddb/mods-enabled/linelog
> # Instantiating module "logintime" from file
> /etc/raddb/mods-enabled/logintime
> # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
> # Instantiating module "etc_passwd" from file
> /etc/raddb/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "preprocess" from file
> /etc/raddb/mods-enabled/preprocess
> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> reading pairlist file /etc/raddb/mods-config/preprocess/hints
> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /etc/raddb/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
> # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
> rlm_ldap: libldap vendor: OpenLDAP, version: 20459
> accounting {
> reference = "%{tolower:type.%{Acct-Status-Type}}"
> }
> post-auth {
> reference = "."
> }
> rlm_ldap (ldap): Initialising connection pool
> pool {
> start = 5
> min = 3
> max = 32
> spare = 10
> uses = 0
> lifetime = 0
> cleanup_interval = 30
> idle_timeout = 60
> retry_delay = 30
> spread = no
> }
> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/raddb/radiusd.conf
> } # server
> server default { # from file /etc/raddb/sites-enabled/default
> # Loading authenticate {...}
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> } # server default
> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> # Loading authorize {...}
> # Loading session {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' --
> /etc/raddb/sites-enabled/inner-tunnel:341
> } # server inner-tunnel
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on proxy address * port 43356
> Listening on proxy address :: port 50675
> Ready to process requests
> (0) Received Access-Request Id 11 from 122.1.5.84:43809 to 122.1.5.84:1812
> length 86
> (0) User-Name = "krishnachaitanya"
> (0) User-Password = "Freeip at 1234"
> (0) NAS-IP-Address = 122.1.5.84
> (0) NAS-Port = 1812
> (0) Message-Authenticator = 0x9162e9e3154076ccc69ddab02d33be4e
> (0) # Executing section authorize from file /etc/raddb/sites-enabled/default
> (0) authorize {
> (0) policy filter_username {
> (0) if (&User-Name) {
> (0) if (&User-Name) -> TRUE
> (0) if (&User-Name) {
> (0) if (&User-Name =~ / /) {
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@[^@]*@/ ) {
> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (0) if (&User-Name =~ /\.\./ ) {
> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
> FALSE
> (0) if (&User-Name =~ /\.$/) {
> (0) if (&User-Name =~ /\.$/) -> FALSE
> (0) if (&User-Name =~ /@\./) {
> (0) if (&User-Name =~ /@\./) -> FALSE
> (0) } # if (&User-Name) = notfound
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) [digest] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name = "krishnachaitanya", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) eap: No EAP-Message, not doing EAP
> (0) [eap] = noop
> (0) [files] = noop
> rlm_ldap (ldap): Reserved connection (0)
> (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
> (0) ldap: --> (uid=krishnachaitanya)
> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate
> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com" with
> filter "(uid=krishnachaitanya)", scope "sub"
> (0) ldap: Waiting for search result...
> (0) ldap: The specified DN wasn't found
> (0) ldap: Search returned no results
> rlm_ldap (ldap): Released connection (0)
> Need 5 more connections to reach 10 spares
> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
> used
> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> rlm_ldap (ldap): Waiting for bind result...
> rlm_ldap (ldap): Bind successful
> (0) [ldap] = notfound
> (0) if ((ok || updated) && User-Password) {
> (0) if ((ok || updated) && User-Password) -> FALSE
> (0) [expiration] = noop
> (0) [logintime] = noop
> (0) pap: WARNING: No "known good" password found for the user. Not setting
> Auth-Type
> (0) pap: WARNING: Authentication will fail unless a "known good" password
> is available
> (0) [pap] = noop
> (0) } # authorize = ok
> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
> Reject
> (0) Failed to authenticate the user
> (0) Using Post-Auth-Type Reject
> (0) # Executing group from file /etc/raddb/sites-enabled/default
> (0) Post-Auth-Type REJECT {
> (0) attr_filter.access_reject: EXPAND %{User-Name}
> (0) attr_filter.access_reject: --> krishnachaitanya
> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
> (0) [attr_filter.access_reject] = updated
> (0) [eap] = noop
> (0) policy remove_reply_message_if_eap {
> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> (0) else {
> (0) [noop] = noop
> (0) } # else = noop
> (0) } # policy remove_reply_message_if_eap = noop
> (0) } # Post-Auth-Type REJECT = updated
> (0) Delaying response for 1.000000 seconds
> Waking up in 0.1 seconds.
> Waking up in 0.8 seconds.
> (0) Sending delayed response
> (0) Sent Access-Reject Id 11 from 122.1.5.84:1812 to 122.1.5.84:43809
> length 20
> Waking up in 3.9 seconds.
> (0) Cleaning up request packet ID 11 with timestamp +10
> Ready to process requests
> ============================================================================
>
> *Krishna Chaitanya Ala*
> *Network and Operations Engineer*
>
> *QI Cap Markets LLP*
> *Bangalore,Karnataka*
> *Slack : krishna.chaitanya at qi-cap.com <krishna.chaitanya at qi-cap.com>*
>
>
>
> On Wed, 13 Jul 2022 at 15:25, Michael Schwartzkopff via Freeradius-Users <
> freeradius-users at lists.freeradius.org> wrote:
>
>> On 13.07.22 11:52, Krishna Chaitanya wrote:
>>> Matthew,
>>> Not really,Somehow, I missed reading all of the debug report.
>>> I am very new to Linux and having a hard time interpreting all of the
>> Debug
>>> report.
>>> However, After going through the errors:
>>>
>>> 1. I can say that the username is not being used twice.Even, created
>>> another user profile with username "krishnachaitanya" and getting
>> the same
>>> error message when running the radtest.
>>> 2. In the next test run, modified "base_dn" details as
>>> 'O=QI-CAP.COM,CN=Certificate
>>> Authority' and the test resulted in the below error.After reviewing
>> the
>>> highlighted errors, finding it confused to understand and not really
>> sure
>>> the fix for these errors.As far as I know, PAP can read only clear
>> text
>>> passwords and in mycase the passwords are not encrypted when running
>> the
>>> radtest command as "radtest krishnachaitanya *Freeip at 1234
>> *122.1.5.84
>>> 1812 testing123" and not sure why am seeing PAP password errors.
>>> 3. and I am not sure why am seeing the messages "(0) ldap: Waiting
>> for
>>> search result...
>>> (0) ldap: The specified DN wasn't found
>>> (0) ldap: Search returned no results" when "rlm_ldap bind is
>> successful".
>>> Is there any relation between them?
>>>
>>> *Please help!*
>>>
>>> [Ready to process requests
>>> (0) Received Access-Request Id 252 from 122.1.5.84:55576 to
>> 122.1.5.84:1812
>>> length 86
>>> (0) User-Name = "krishnachaitanya"
>>> (0) User-Password = "Freeip at 1234"
>>> (0) NAS-IP-Address = 122.1.5.84
>>> (0) NAS-Port = 1812
>>> (0) Message-Authenticator = 0x7d7802787a4d84809dbcd42a46873fe6
>>> (0) # Executing section authorize from file
>> /etc/raddb/sites-enabled/default
>>> (0) authorize {
>>> (0) policy filter_username {
>>> (0) if (&User-Name) {
>>> (0) if (&User-Name) -> TRUE
>>> (0) if (&User-Name) {
>>> (0) if (&User-Name =~ / /) {
>>> (0) if (&User-Name =~ / /) -> FALSE
>>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>>> (0) if (&User-Name =~ /\.\./ ) {
>>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> ->
>>> FALSE
>>> (0) if (&User-Name =~ /\.$/) {
>>> (0) if (&User-Name =~ /\.$/) -> FALSE
>>> (0) if (&User-Name =~ /@\./) {
>>> (0) if (&User-Name =~ /@\./) -> FALSE
>>> (0) } # if (&User-Name) = notfound
>>> (0) } # policy filter_username = notfound
>>> (0) [preprocess] = ok
>>> (0) [chap] = noop
>>> (0) [mschap] = noop
>>> (0) [digest] = noop
>>> (0) suffix: Checking for suffix after "@"
>>> (0) suffix: No '@' in User-Name = "krishnachaitanya", looking up realm
>> NULL
>>> (0) suffix: No such realm "NULL"
>>> (0) [suffix] = noop
>>> (0) eap: No EAP-Message, not doing EAP
>>> (0) [eap] = noop
>>> (0) [files] = noop
>>> rlm_ldap (ldap): Reserved connection (0)
>>> (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
>>> (0) ldap: --> (uid=krishnachaitanya)
>>> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate Authority"
>> with
>>> filter "(uid=krishnachaitanya)", scope "sub"
>>> (0) ldap: Waiting for search result...
>>> (0) ldap: The specified DN wasn't found
>>> (0) ldap: Search returned no results
>>> rlm_ldap (ldap): Released connection (0)
>>> Need 5 more connections to reach 10 spares
>>> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
>>> used
>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
>>> rlm_ldap (ldap): Waiting for bind result...
>>> rlm_ldap (ldap): Bind successful
>>> (0) [ldap] = notfound
>>> (0) if ((ok || updated) && User-Password) {
>>> (0) if ((ok || updated) && User-Password) -> FALSE
>>> (0) [expiration] = noop
>>> (0) [logintime] = noop
>>> (0) pap: WARNING: No "known good" password found for the user. Not
>> setting
>>> Auth-Type
>>> (0) pap: WARNING: Authentication will fail unless a "known good" password
>>> is available
>>> (0) [pap] = noop
>>> (0) } # authorize = ok
>>> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
>>> Reject
>>> (0) Failed to authenticate the user
>>> (0) Using Post-Auth-Type Reject
>>> (0) # Executing group from file /etc/raddb/sites-enabled/default
>>> (0) Post-Auth-Type REJECT {
>>> (0) attr_filter.access_reject: EXPAND %{User-Name}
>>> (0) attr_filter.access_reject: --> krishnachaitanya
>>> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
>>> (0) [attr_filter.access_reject] = updated
>>> (0) [eap] = noop
>>> (0) policy remove_reply_message_if_eap {
>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>>> (0) else {
>>> (0) [noop] = noop
>>> (0) } # else = noop
>>> (0) } # policy remove_reply_message_if_eap = noop
>>> (0) } # Post-Auth-Type REJECT = updated
>>> (0) Delaying response for 1.000000 seconds
>>> Waking up in 0.2 seconds.
>>> Waking up in 0.7 seconds.
>>> (0) Sending delayed response
>>> (0) Sent Access-Reject Id 252 from 122.1.5.84:1812 to 122.1.5.84:55576
>>> length 20
>>> Waking up in 3.9 seconds.
>>> (0) Cleaning up request packet ID 252 with timestamp +5
>>> Ready to process requests
>>>
>>>
>>> *Krishna Chaitanya Ala*
>>> *Network and Operations Engineer*
>>>
>>>
>>>
>>> On Fri, 8 Jul 2022 at 16:27, Matthew Newton <mcn at freeradius.org> wrote:
>>>
>>>> On 08/07/2022 11:45, Krishna Chaitanya wrote:
>>>>> # search result
>>>>> search: 2
>>>>> result: 0 Success
>>>>>
>>>>> # numResponses: 3
>>>>> # numEntries: 2
>>>>> *(0) ldap: ERROR: Ambiguous search result, returned 2 unsorted entries
>>>>> (should return 1 or 0). Enable sorting, or specify a more restrictive
>>>>> base_dn, filter or scope(0) ldap: ERROR: The following entries were
>>>>> returned:(0) ldap: ERROR:
>>>>> uid=admin,cn=users,cn=compat,dc=qi-cap,dc=com(0) ldap: ERROR:
>>>>> uid=admin,cn=users,cn=accounts,dc=qi-cap,dc=com*
>>>>> rlm_ldap (ldap): Released connection (0)
>>>>> Need 5 more connections to reach 10 spares
>>>> Did you read the debug output?
>>>>
>>>> You have two users with the same uid. FreeRADIUS won't have any idea
>>>> which one you want.
>>>>
>>>> So you need to either not use the same username twice, or configure
>>>> FreeRADIUS with a more restrictive base DN so that it only finds one of
>>>> them.
>>>>
>>>> --
>>>> Matthew
>>>> -
>>>> List info/subscribe/unsubscribe? See
>>>> http://www.freeradius.org/list/users.html
>>>>
>>> -
>>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>>
>>
>> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate Authority"
>> with
>> filter "(uid=krishnachaitanya)", scope "sub"
>> (0) ldap: Waiting for search result...
>> (0) ldap: The specified DN wasn't found
>> (0) ldap: Search returned no results
>>
>> The user is not found in the LDAP. Do you use uid? oder cn? Wrong part of
>> the tree? Whif is the LDIF of your user?
>> Can you do a manual ldapsearch for the user?
>>
>>
>> Mit freundlichen Grüßen,
>>
>> --
>>
>> [*] sys4 AG
>>
>> https://sys4.de, +49 (89) 30 90 46 64
>> Schleißheimer Straße 26/MG,80333 München
>>
>> Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
>> Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
>> Aufsichtsratsvorsitzender: Florian Kirstein
>>
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
With ldapsearch you find the object in:
dn: uid=krishnachaitanya,cn=users,cn=compat,dc=qi-cap,dc=com
FR searches in (from the logging):
(0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate
Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com" with
filter "(uid=krishnachaitanya)", scope "sub"
You see the difference?
Mit freundlichen Grüßen,
--
[*] sys4 AG
https://sys4.de, +49 (89) 30 90 46 64
Schleißheimer Straße 26/MG,80333 München
Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
Aufsichtsratsvorsitzender: Florian Kirstein
More information about the Freeradius-Users
mailing list