FreeRadius and FreeIpa integration not working in our Lab setup
Krishna Chaitanya
krishna.chaitanya at qi-cap.com
Thu Jul 14 06:47:34 UTC 2022
Thanks very much Michael for your help and after making those changes, I
was able to see an Accept message from FreeRadius.
However, when trying to authenticate wireless using Freeradius I can see
something like below.
Please suggest!!
==============================================
Listening on auth address * port 1812 bound to server default
Listening on acct address * port 1813 bound to server default
Listening on auth address :: port 1812 bound to server default
Listening on acct address :: port 1813 bound to server default
Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
Listening on proxy address * port 34082
Listening on proxy address :: port 42473
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from
unknown client 122.1.5.89 port 49457 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from
unknown client 122.1.5.89 port 49457 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from
unknown client 122.1.5.89 port 49457 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from
unknown client 122.1.5.89 port 49457 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from
unknown client 122.1.5.89 port 49457 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from
unknown client 122.1.5.89 port 49457 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from
unknown client 122.1.5.89 port 49457 proto udp
Ready to process requests
Ignoring request to auth address * port 1812 bound to server default from
unknown client 122.1.5.136 port 37235 proto udp
Ready to process requests
Thanks
Krishna
On Wed, 13 Jul 2022 at 17:03, Michael Schwartzkopff <ms at sys4.de> wrote:
> On 13.07.22 12:59, Krishna Chaitanya wrote:
> > Michael,
> > The manual search is giving expected results but not sure why I am
> seeing 2
> > search results.
> > Please find the below radtest results along with the manual ldap search
> > report.
> >
> > ================================================================
> > [admin at freeradius raddb]$ ldapsearch -x uid=*krishnachaitanya*
> > # extended LDIF
> > #
> > # LDAPv3
> > # base <dc=qi-cap,dc=com> (default) with scope subtree
> > # filter: uid=krishnachaitanya
> > # requesting: ALL
> > #
> >
> > # krishnachaitanya, users, compat, qi-cap.com
> > dn: uid=krishnachaitanya,cn=users,cn=compat,dc=qi-cap,dc=com
> > objectClass: posixAccount
> > objectClass: ipaOverrideTarget
> > objectClass: top
> > gecos: Krishna Ala
> > cn: Krishna Ala
> > uidNumber: 1283800005
> > gidNumber: 1283800005
> > loginShell: /bin/sh
> > homeDirectory: /home/krishnachaitanya
> > ipaAnchorUUID::
> > OklQQTpxaS1jYXAuY29tOmY1N2IxYTcyLWZlYjAtMTFlYy04MWYxLTA4MDAyNz
> > M2ZWMzOQ==
> > uid: krishnachaitanya
> >
> > # krishnachaitanya, users, accounts, qi-cap.com
> > dn: uid=krishnachaitanya,cn=users,cn=accounts,dc=qi-cap,dc=com
> > givenName: Krishna
> > sn: Ala
> > uid: krishnachaitanya
> > cn: Krishna Ala
> > displayName: Krishna Ala
> > initials: KA
> > gecos: Krishna Ala
> > objectClass: top
> > objectClass: person
> > objectClass: organizationalperson
> > objectClass: inetorgperson
> > objectClass: inetuser
> > objectClass: posixaccount
> > objectClass: krbprincipalaux
> > objectClass: krbticketpolicyaux
> > objectClass: ipaobject
> > objectClass: ipasshuser
> > objectClass: ipaSshGroupOfPubKeys
> > objectClass: mepOriginEntry
> > objectClass: ipantuserattrs
> > loginShell: /bin/sh
> > homeDirectory: /home/krishnachaitanya
> > uidNumber: 1283800005
> > gidNumber: 1283800005
> > ipaNTSecurityIdentifier: S-1-5-21-2716401607-2924185208-1841578509-1005
> >
> > # search result
> > search: 2
> > result: 0 Success
> >
> > # numResponses: 3
> > # numEntries: 2
> >
> ===============================================================================================
> > [root at freeradius admin]# radiusd -X
> > FreeRADIUS Version 3.0.21
> > Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
> > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE
> > You may redistribute copies of FreeRADIUS under the terms of the
> > GNU General Public License
> > For more information about these matters, see the file named COPYRIGHT
> > Starting - reading configuration files ...
> > including dictionary file /usr/share/freeradius/dictionary
> > including dictionary file /usr/share/freeradius/dictionary.dhcp
> > including dictionary file /usr/share/freeradius/dictionary.vqp
> > including dictionary file /etc/raddb/dictionary
> > including configuration file /etc/raddb/radiusd.conf
> > including configuration file /etc/raddb/proxy.conf
> > including configuration file /etc/raddb/clients.conf
> > including files in directory /etc/raddb/mods-enabled/
> > including configuration file /etc/raddb/mods-enabled/always
> > including configuration file /etc/raddb/mods-enabled/attr_filter
> > including configuration file /etc/raddb/mods-enabled/cache_eap
> > including configuration file /etc/raddb/mods-enabled/chap
> > including configuration file /etc/raddb/mods-enabled/date
> > including configuration file /etc/raddb/mods-enabled/detail
> > including configuration file /etc/raddb/mods-enabled/detail.log
> > including configuration file /etc/raddb/mods-enabled/digest
> > including configuration file /etc/raddb/mods-enabled/dynamic_clients
> > including configuration file /etc/raddb/mods-enabled/eap
> > including configuration file /etc/raddb/mods-enabled/echo
> > including configuration file /etc/raddb/mods-enabled/exec
> > including configuration file /etc/raddb/mods-enabled/expiration
> > including configuration file /etc/raddb/mods-enabled/expr
> > including configuration file /etc/raddb/mods-enabled/files
> > including configuration file /etc/raddb/mods-enabled/linelog
> > including configuration file /etc/raddb/mods-enabled/logintime
> > including configuration file /etc/raddb/mods-enabled/mschap
> > including configuration file /etc/raddb/mods-enabled/ntlm_auth
> > including configuration file /etc/raddb/mods-enabled/pap
> > including configuration file /etc/raddb/mods-enabled/passwd
> > including configuration file /etc/raddb/mods-enabled/preprocess
> > including configuration file /etc/raddb/mods-enabled/radutmp
> > including configuration file /etc/raddb/mods-enabled/realm
> > including configuration file /etc/raddb/mods-enabled/replicate
> > including configuration file /etc/raddb/mods-enabled/soh
> > including configuration file /etc/raddb/mods-enabled/sradutmp
> > including configuration file /etc/raddb/mods-enabled/unix
> > including configuration file /etc/raddb/mods-enabled/unpack
> > including configuration file /etc/raddb/mods-enabled/utf8
> > including configuration file /etc/raddb/mods-enabled/ldap
> > including files in directory /etc/raddb/policy.d/
> > including configuration file /etc/raddb/policy.d/accounting
> > including configuration file /etc/raddb/policy.d/canonicalization
> > including configuration file /etc/raddb/policy.d/control
> > including configuration file /etc/raddb/policy.d/cui
> > including configuration file /etc/raddb/policy.d/debug
> > including configuration file /etc/raddb/policy.d/dhcp
> > including configuration file /etc/raddb/policy.d/eap
> > including configuration file /etc/raddb/policy.d/filter
> > including configuration file /etc/raddb/policy.d/operator-name
> > including configuration file /etc/raddb/policy.d/rfc7542
> > including files in directory /etc/raddb/sites-enabled/
> > including configuration file /etc/raddb/sites-enabled/default
> > including configuration file /etc/raddb/sites-enabled/inner-tunnel
> > main {
> > security {
> > user = "radiusd"
> > group = "radiusd"
> > allow_core_dumps = no
> > }
> > name = "radiusd"
> > prefix = "/usr"
> > localstatedir = "/var"
> > logdir = "/var/log/radius"
> > run_dir = "/var/run/radiusd"
> > }
> > main {
> > name = "radiusd"
> > prefix = "/usr"
> > localstatedir = "/var"
> > sbindir = "/usr/sbin"
> > logdir = "/var/log/radius"
> > run_dir = "/var/run/radiusd"
> > libdir = "/usr/lib64/freeradius"
> > radacctdir = "/var/log/radius/radacct"
> > hostname_lookups = no
> > max_request_time = 30
> > cleanup_delay = 5
> > max_requests = 16384
> > pidfile = "/var/run/radiusd/radiusd.pid"
> > checkrad = "/usr/sbin/checkrad"
> > debug_level = 0
> > proxy_requests = yes
> > log {
> > stripped_names = no
> > auth = no
> > auth_badpass = no
> > auth_goodpass = no
> > colourise = yes
> > msg_denied = "You are already logged in - access denied"
> > }
> > resources {
> > }
> > security {
> > max_attributes = 200
> > reject_delay = 1.000000
> > status_server = yes
> > }
> > }
> > radiusd: #### Loading Realms and Home Servers ####
> > proxy server {
> > retry_delay = 5
> > retry_count = 3
> > default_fallback = no
> > dead_time = 120
> > wake_all_if_all_dead = no
> > }
> > home_server localhost {
> > ipaddr = 127.0.0.1
> > port = 1812
> > type = "auth"
> > secret = <<< secret >>>
> > response_window = 20.000000
> > response_timeouts = 1
> > max_outstanding = 65536
> > zombie_period = 40
> > status_check = "status-server"
> > ping_interval = 30
> > check_interval = 30
> > check_timeout = 4
> > num_answers_to_alive = 3
> > revive_interval = 120
> > limit {
> > max_connections = 16
> > max_requests = 0
> > lifetime = 0
> > idle_timeout = 0
> > }
> > coa {
> > irt = 2
> > mrt = 16
> > mrc = 5
> > mrd = 30
> > }
> > }
> > home_server_pool my_auth_failover {
> > type = fail-over
> > home_server = localhost
> > }
> > realm example.com {
> > auth_pool = my_auth_failover
> > }
> > realm LOCAL {
> > }
> > radiusd: #### Loading Clients ####
> > client localhost {
> > ipaddr = 122.1.5.84
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > nas_type = "other"
> > proto = "*"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > client localhost_ipv6 {
> > ipv6addr = ::1
> > require_message_authenticator = no
> > secret = <<< secret >>>
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > Debugger not attached
> > # Creating Auth-Type = mschap
> > # Creating Auth-Type = digest
> > # Creating Auth-Type = eap
> > # Creating Auth-Type = PAP
> > # Creating Auth-Type = CHAP
> > # Creating Auth-Type = MS-CHAP
> > # Creating Auth-Type = LDAP
> > radiusd: #### Instantiating modules ####
> > modules {
> > # Loaded module rlm_always
> > # Loading module "reject" from file /etc/raddb/mods-enabled/always
> > always reject {
> > rcode = "reject"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "fail" from file /etc/raddb/mods-enabled/always
> > always fail {
> > rcode = "fail"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "ok" from file /etc/raddb/mods-enabled/always
> > always ok {
> > rcode = "ok"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "handled" from file /etc/raddb/mods-enabled/always
> > always handled {
> > rcode = "handled"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "invalid" from file /etc/raddb/mods-enabled/always
> > always invalid {
> > rcode = "invalid"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "userlock" from file /etc/raddb/mods-enabled/always
> > always userlock {
> > rcode = "userlock"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "notfound" from file /etc/raddb/mods-enabled/always
> > always notfound {
> > rcode = "notfound"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "noop" from file /etc/raddb/mods-enabled/always
> > always noop {
> > rcode = "noop"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "updated" from file /etc/raddb/mods-enabled/always
> > always updated {
> > rcode = "updated"
> > simulcount = 0
> > mpp = no
> > }
> > # Loaded module rlm_attr_filter
> > # Loading module "attr_filter.post-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.post-proxy {
> > filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.pre-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.pre-proxy {
> > filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_reject" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.access_reject {
> > filename = "/etc/raddb/mods-config/attr_filter/access_reject"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_challenge" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.access_challenge {
> > filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.accounting_response" from file
> > /etc/raddb/mods-enabled/attr_filter
> > attr_filter attr_filter.accounting_response {
> > filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loaded module rlm_cache
> > # Loading module "cache_eap" from file
> /etc/raddb/mods-enabled/cache_eap
> > cache cache_eap {
> > driver = "rlm_cache_rbtree"
> > key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> > ttl = 15
> > max_entries = 0
> > epoch = 0
> > add_stats = no
> > }
> > # Loaded module rlm_chap
> > # Loading module "chap" from file /etc/raddb/mods-enabled/chap
> > # Loaded module rlm_date
> > # Loading module "date" from file /etc/raddb/mods-enabled/date
> > date {
> > format = "%b %e %Y %H:%M:%S %Z"
> > utc = no
> > }
> > # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
> > date wispr2date {
> > format = "%Y-%m-%dT%H:%M:%S"
> > utc = no
> > }
> > # Loaded module rlm_detail
> > # Loading module "detail" from file /etc/raddb/mods-enabled/detail
> > detail {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "auth_log" from file
> /etc/raddb/mods-enabled/detail.log
> > detail auth_log {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "reply_log" from file
> /etc/raddb/mods-enabled/detail.log
> > detail reply_log {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "pre_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > detail pre_proxy_log {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "post_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > detail post_proxy_log {
> > filename =
> >
> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loaded module rlm_digest
> > # Loading module "digest" from file /etc/raddb/mods-enabled/digest
> > # Loaded module rlm_dynamic_clients
> > # Loading module "dynamic_clients" from file
> > /etc/raddb/mods-enabled/dynamic_clients
> > # Loaded module rlm_eap
> > # Loading module "eap" from file /etc/raddb/mods-enabled/eap
> > eap {
> > default_eap_type = "md5"
> > timer_expire = 60
> > ignore_unknown_eap_types = no
> > cisco_accounting_username_bug = no
> > max_sessions = 16384
> > }
> > # Loaded module rlm_exec
> > # Loading module "echo" from file /etc/raddb/mods-enabled/echo
> > exec echo {
> > wait = yes
> > program = "/bin/echo %{User-Name}"
> > input_pairs = "request"
> > output_pairs = "reply"
> > shell_escape = yes
> > }
> > # Loading module "exec" from file /etc/raddb/mods-enabled/exec
> > exec {
> > wait = no
> > input_pairs = "request"
> > shell_escape = yes
> > timeout = 10
> > }
> > # Loaded module rlm_expiration
> > # Loading module "expiration" from file
> /etc/raddb/mods-enabled/expiration
> > # Loaded module rlm_expr
> > # Loading module "expr" from file /etc/raddb/mods-enabled/expr
> > expr {
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> > }
> > # Loaded module rlm_files
> > # Loading module "files" from file /etc/raddb/mods-enabled/files
> > files {
> > filename = "/etc/raddb/mods-config/files/authorize"
> > acctusersfile = "/etc/raddb/mods-config/files/accounting"
> > preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
> > }
> > # Loaded module rlm_linelog
> > # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
> > linelog {
> > filename = "/var/log/radius/linelog"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = "This is a log message for %{User-Name}"
> > reference = "messages.%{%{reply:Packet-Type}:-default}"
> > }
> > # Loading module "log_accounting" from file
> > /etc/raddb/mods-enabled/linelog
> > linelog log_accounting {
> > filename = "/var/log/radius/linelog-accounting"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = ""
> > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> > }
> > # Loaded module rlm_logintime
> > # Loading module "logintime" from file
> /etc/raddb/mods-enabled/logintime
> > logintime {
> > minimum_timeout = 60
> > }
> > # Loaded module rlm_mschap
> > # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
> > mschap {
> > use_mppe = yes
> > require_encryption = no
> > require_strong = no
> > with_ntdomain_hack = yes
> > passchange {
> > }
> > allow_retry = yes
> > winbind_retry_with_normalised_username = no
> > }
> > # Loading module "ntlm_auth" from file
> /etc/raddb/mods-enabled/ntlm_auth
> > exec ntlm_auth {
> > wait = yes
> > program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> > --username=%{mschap:User-Name} --password=%{User-Password}"
> > shell_escape = yes
> > }
> > # Loaded module rlm_pap
> > # Loading module "pap" from file /etc/raddb/mods-enabled/pap
> > pap {
> > normalise = yes
> > }
> > # Loaded module rlm_passwd
> > # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
> > passwd etc_passwd {
> > filename = "/etc/passwd"
> > format = "*User-Name:Crypt-Password:"
> > delimiter = ":"
> > ignore_nislike = no
> > ignore_empty = yes
> > allow_multiple_keys = no
> > hash_size = 100
> > }
> > # Loaded module rlm_preprocess
> > # Loading module "preprocess" from file
> /etc/raddb/mods-enabled/preprocess
> > preprocess {
> > huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
> > hints = "/etc/raddb/mods-config/preprocess/hints"
> > with_ascend_hack = no
> > ascend_channels_per_line = 23
> > with_ntdomain_hack = no
> > with_specialix_jetstream_hack = no
> > with_cisco_vsa_hack = no
> > with_alvarion_vsa_hack = no
> > }
> > # Loaded module rlm_radutmp
> > # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
> > radutmp {
> > filename = "/var/log/radius/radutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 384
> > caller_id = yes
> > }
> > # Loaded module rlm_realm
> > # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
> > realm IPASS {
> > format = "prefix"
> > delimiter = "/"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
> > realm suffix {
> > format = "suffix"
> > delimiter = "@"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
> > realm bangpath {
> > format = "prefix"
> > delimiter = "!"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "realmpercent" from file
> /etc/raddb/mods-enabled/realm
> > realm realmpercent {
> > format = "suffix"
> > delimiter = "%"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
> > realm ntdomain {
> > format = "prefix"
> > delimiter = "\\"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loaded module rlm_replicate
> > # Loading module "replicate" from file
> /etc/raddb/mods-enabled/replicate
> > # Loaded module rlm_soh
> > # Loading module "soh" from file /etc/raddb/mods-enabled/soh
> > soh {
> > dhcp = yes
> > }
> > # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
> > radutmp sradutmp {
> > filename = "/var/log/radius/sradutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 420
> > caller_id = no
> > }
> > # Loaded module rlm_unix
> > # Loading module "unix" from file /etc/raddb/mods-enabled/unix
> > unix {
> > radwtmp = "/var/log/radius/radwtmp"
> > }
> > Creating attribute Unix-Group
> > # Loaded module rlm_unpack
> > # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
> > # Loaded module rlm_utf8
> > # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
> > # Loaded module rlm_ldap
> > # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
> > ldap {
> > server = "122.1.5.84"
> > sasl {
> > }
> > user_dn = "LDAP-UserDn"
> > user {
> > scope = "sub"
> > access_positive = yes
> > sasl {
> > }
> > }
> > group {
> > filter = "(objectClass=posixGroup)"
> > scope = "sub"
> > name_attribute = "cn"
> > membership_attribute = "memberOf"
> > cacheable_name = no
> > cacheable_dn = no
> > allow_dangling_group_ref = no
> > }
> > client {
> > filter = "(objectClass=radiusClient)"
> > scope = "sub"
> > base_dn = "O=QI-CAP.COM,CN=Certificate
> > Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com"
> > }
> > profile {
> > }
> > options {
> > ldap_debug = 40
> > chase_referrals = yes
> > rebind = yes
> > net_timeout = 1
> > res_timeout = 10
> > srv_timelimit = 3
> > idle = 60
> > probes = 3
> > interval = 3
> > }
> > tls {
> > start_tls = no
> > }
> > }
> > Creating attribute LDAP-Group
> > instantiate {
> > }
> > # Instantiating module "reject" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
> > # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
> > # Instantiating module "handled" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "invalid" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "userlock" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "notfound" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
> > # Instantiating module "updated" from file
> /etc/raddb/mods-enabled/always
> > # Instantiating module "attr_filter.post-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
> > # Instantiating module "attr_filter.pre-proxy" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
> > # Instantiating module "attr_filter.access_reject" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
> > # Instantiating module "attr_filter.access_challenge" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
> > # Instantiating module "attr_filter.accounting_response" from file
> > /etc/raddb/mods-enabled/attr_filter
> > reading pairlist file
> /etc/raddb/mods-config/attr_filter/accounting_response
> > # Instantiating module "cache_eap" from file
> > /etc/raddb/mods-enabled/cache_eap
> > rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> > loaded and linked
> > # Instantiating module "detail" from file
> /etc/raddb/mods-enabled/detail
> > # Instantiating module "auth_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> > detail output
> > # Instantiating module "reply_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > # Instantiating module "pre_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > # Instantiating module "post_proxy_log" from file
> > /etc/raddb/mods-enabled/detail.log
> > # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
> > # Linked to sub-module rlm_eap_md5
> > # Linked to sub-module rlm_eap_leap
> > # Linked to sub-module rlm_eap_gtc
> > gtc {
> > challenge = "Password: "
> > auth_type = "PAP"
> > }
> > # Linked to sub-module rlm_eap_tls
> > tls {
> > tls = "tls-common"
> > }
> > tls-config tls-common {
> > verify_depth = 0
> > ca_path = "/etc/raddb/certs"
> > pem_file_type = yes
> > private_key_file = "/etc/raddb/certs/server.pem"
> > certificate_file = "/etc/raddb/certs/server.pem"
> > ca_file = "/etc/raddb/certs/ca.pem"
> > private_key_password = <<< secret >>>
> > dh_file = "/etc/raddb/certs/dh"
> > fragment_size = 1024
> > include_length = yes
> > auto_chain = yes
> > check_crl = no
> > check_all_crl = no
> > ca_path_reload_interval = 0
> > cipher_list = "PROFILE=SYSTEM"
> > cipher_server_preference = no
> > reject_unknown_intermediate_ca = no
> > ecdh_curve = "prime256v1"
> > disable_tlsv1 = yes
> > disable_tlsv1_1 = yes
> > tls_max_version = "1.2"
> > tls_min_version = "1.2"
> > cache {
> > enable = no
> > lifetime = 24
> > max_entries = 255
> > }
> > verify {
> > skip_if_ocsp_ok = no
> > }
> > ocsp {
> > enable = no
> > override_cert_url = yes
> > url = "http://127.0.0.1/ocsp/"
> > use_nonce = yes
> > timeout = 0
> > softfail = no
> > }
> > }
> > tls: Please use 'tls_min_version' and 'tls_max_version' instead of
> > 'disable_tlsv1'
> > tls: Please use 'tls_min_version' and 'tls_max_version' instead of
> > 'disable_tlsv1_1'
> > tls: Setting DH parameters from /etc/raddb/certs/dh - this is no longer
> > necessary.
> > tls: You should comment out the 'dh_file' configuration item.
> > # Linked to sub-module rlm_eap_ttls
> > ttls {
> > tls = "tls-common"
> > default_eap_type = "md5"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > virtual_server = "inner-tunnel"
> > include_length = yes
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_peap
> > peap {
> > tls = "tls-common"
> > default_eap_type = "mschapv2"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > proxy_tunneled_request_as_eap = yes
> > virtual_server = "inner-tunnel"
> > soh = no
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_mschapv2
> > mschapv2 {
> > with_ntdomain_hack = no
> > send_error = no
> > }
> > # Instantiating module "expiration" from file
> > /etc/raddb/mods-enabled/expiration
> > # Instantiating module "files" from file /etc/raddb/mods-enabled/files
> > reading pairlist file /etc/raddb/mods-config/files/authorize
> > reading pairlist file /etc/raddb/mods-config/files/accounting
> > reading pairlist file /etc/raddb/mods-config/files/pre-proxy
> > # Instantiating module "linelog" from file
> /etc/raddb/mods-enabled/linelog
> > # Instantiating module "log_accounting" from file
> > /etc/raddb/mods-enabled/linelog
> > # Instantiating module "logintime" from file
> > /etc/raddb/mods-enabled/logintime
> > # Instantiating module "mschap" from file
> /etc/raddb/mods-enabled/mschap
> > rlm_mschap (mschap): using internal authentication
> > # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
> > # Instantiating module "etc_passwd" from file
> > /etc/raddb/mods-enabled/passwd
> > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> > # Instantiating module "preprocess" from file
> > /etc/raddb/mods-enabled/preprocess
> > reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
> > reading pairlist file /etc/raddb/mods-config/preprocess/hints
> > # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
> > # Instantiating module "suffix" from file
> /etc/raddb/mods-enabled/realm
> > # Instantiating module "bangpath" from file
> /etc/raddb/mods-enabled/realm
> > # Instantiating module "realmpercent" from file
> > /etc/raddb/mods-enabled/realm
> > # Instantiating module "ntdomain" from file
> /etc/raddb/mods-enabled/realm
> > # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
> > rlm_ldap: libldap vendor: OpenLDAP, version: 20459
> > accounting {
> > reference = "%{tolower:type.%{Acct-Status-Type}}"
> > }
> > post-auth {
> > reference = "."
> > }
> > rlm_ldap (ldap): Initialising connection pool
> > pool {
> > start = 5
> > min = 3
> > max = 32
> > spare = 10
> > uses = 0
> > lifetime = 0
> > cleanup_interval = 30
> > idle_timeout = 60
> > retry_delay = 30
> > spread = no
> > }
> > rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
> > used
> > rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> > rlm_ldap (ldap): Waiting for bind result...
> > rlm_ldap (ldap): Bind successful
> > rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
> > used
> > rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> > rlm_ldap (ldap): Waiting for bind result...
> > rlm_ldap (ldap): Bind successful
> > rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
> > used
> > rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> > rlm_ldap (ldap): Waiting for bind result...
> > rlm_ldap (ldap): Bind successful
> > rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
> > used
> > rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> > rlm_ldap (ldap): Waiting for bind result...
> > rlm_ldap (ldap): Bind successful
> > rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
> > used
> > rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> > rlm_ldap (ldap): Waiting for bind result...
> > rlm_ldap (ldap): Bind successful
> > } # modules
> > radiusd: #### Loading Virtual Servers ####
> > server { # from file /etc/raddb/radiusd.conf
> > } # server
> > server default { # from file /etc/raddb/sites-enabled/default
> > # Loading authenticate {...}
> > # Loading authorize {...}
> > Ignoring "sql" (see raddb/mods-available/README.rst)
> > # Loading preacct {...}
> > # Loading accounting {...}
> > # Loading post-proxy {...}
> > # Loading post-auth {...}
> > } # server default
> > server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
> > # Loading authenticate {...}
> > # Loading authorize {...}
> > # Loading session {...}
> > # Loading post-proxy {...}
> > # Loading post-auth {...}
> > # Skipping contents of 'if' as it is always 'false' --
> > /etc/raddb/sites-enabled/inner-tunnel:341
> > } # server inner-tunnel
> > radiusd: #### Opening IP addresses and Ports ####
> > listen {
> > type = "auth"
> > ipaddr = *
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "acct"
> > ipaddr = *
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "auth"
> > ipv6addr = ::
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "acct"
> > ipv6addr = ::
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "auth"
> > ipaddr = 127.0.0.1
> > port = 18120
> > }
> > Listening on auth address * port 1812 bound to server default
> > Listening on acct address * port 1813 bound to server default
> > Listening on auth address :: port 1812 bound to server default
> > Listening on acct address :: port 1813 bound to server default
> > Listening on auth address 127.0.0.1 port 18120 bound to server
> inner-tunnel
> > Listening on proxy address * port 43356
> > Listening on proxy address :: port 50675
> > Ready to process requests
> > (0) Received Access-Request Id 11 from 122.1.5.84:43809 to
> 122.1.5.84:1812
> > length 86
> > (0) User-Name = "krishnachaitanya"
> > (0) User-Password = "Freeip at 1234"
> > (0) NAS-IP-Address = 122.1.5.84
> > (0) NAS-Port = 1812
> > (0) Message-Authenticator = 0x9162e9e3154076ccc69ddab02d33be4e
> > (0) # Executing section authorize from file
> /etc/raddb/sites-enabled/default
> > (0) authorize {
> > (0) policy filter_username {
> > (0) if (&User-Name) {
> > (0) if (&User-Name) -> TRUE
> > (0) if (&User-Name) {
> > (0) if (&User-Name =~ / /) {
> > (0) if (&User-Name =~ / /) -> FALSE
> > (0) if (&User-Name =~ /@[^@]*@/ ) {
> > (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > (0) if (&User-Name =~ /\.\./ ) {
> > (0) if (&User-Name =~ /\.\./ ) -> FALSE
> > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> ->
> > FALSE
> > (0) if (&User-Name =~ /\.$/) {
> > (0) if (&User-Name =~ /\.$/) -> FALSE
> > (0) if (&User-Name =~ /@\./) {
> > (0) if (&User-Name =~ /@\./) -> FALSE
> > (0) } # if (&User-Name) = notfound
> > (0) } # policy filter_username = notfound
> > (0) [preprocess] = ok
> > (0) [chap] = noop
> > (0) [mschap] = noop
> > (0) [digest] = noop
> > (0) suffix: Checking for suffix after "@"
> > (0) suffix: No '@' in User-Name = "krishnachaitanya", looking up realm
> NULL
> > (0) suffix: No such realm "NULL"
> > (0) [suffix] = noop
> > (0) eap: No EAP-Message, not doing EAP
> > (0) [eap] = noop
> > (0) [files] = noop
> > rlm_ldap (ldap): Reserved connection (0)
> > (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
> > (0) ldap: --> (uid=krishnachaitanya)
> > (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate
> > Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com"
> with
> > filter "(uid=krishnachaitanya)", scope "sub"
> > (0) ldap: Waiting for search result...
> > (0) ldap: The specified DN wasn't found
> > (0) ldap: Search returned no results
> > rlm_ldap (ldap): Released connection (0)
> > Need 5 more connections to reach 10 spares
> > rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
> > used
> > rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> > rlm_ldap (ldap): Waiting for bind result...
> > rlm_ldap (ldap): Bind successful
> > (0) [ldap] = notfound
> > (0) if ((ok || updated) && User-Password) {
> > (0) if ((ok || updated) && User-Password) -> FALSE
> > (0) [expiration] = noop
> > (0) [logintime] = noop
> > (0) pap: WARNING: No "known good" password found for the user. Not
> setting
> > Auth-Type
> > (0) pap: WARNING: Authentication will fail unless a "known good" password
> > is available
> > (0) [pap] = noop
> > (0) } # authorize = ok
> > (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
> > Reject
> > (0) Failed to authenticate the user
> > (0) Using Post-Auth-Type Reject
> > (0) # Executing group from file /etc/raddb/sites-enabled/default
> > (0) Post-Auth-Type REJECT {
> > (0) attr_filter.access_reject: EXPAND %{User-Name}
> > (0) attr_filter.access_reject: --> krishnachaitanya
> > (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
> > (0) [attr_filter.access_reject] = updated
> > (0) [eap] = noop
> > (0) policy remove_reply_message_if_eap {
> > (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> > (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> > (0) else {
> > (0) [noop] = noop
> > (0) } # else = noop
> > (0) } # policy remove_reply_message_if_eap = noop
> > (0) } # Post-Auth-Type REJECT = updated
> > (0) Delaying response for 1.000000 seconds
> > Waking up in 0.1 seconds.
> > Waking up in 0.8 seconds.
> > (0) Sending delayed response
> > (0) Sent Access-Reject Id 11 from 122.1.5.84:1812 to 122.1.5.84:43809
> > length 20
> > Waking up in 3.9 seconds.
> > (0) Cleaning up request packet ID 11 with timestamp +10
> > Ready to process requests
> >
> ============================================================================
> >
> > *Krishna Chaitanya Ala*
> > *Network and Operations Engineer*
> >
> > *QI Cap Markets LLP*
> > *Bangalore,Karnataka*
> > *Slack : krishna.chaitanya at qi-cap.com <krishna.chaitanya at qi-cap.com>*
> >
> >
> >
> > On Wed, 13 Jul 2022 at 15:25, Michael Schwartzkopff via Freeradius-Users
> <
> > freeradius-users at lists.freeradius.org> wrote:
> >
> >> On 13.07.22 11:52, Krishna Chaitanya wrote:
> >>> Matthew,
> >>> Not really,Somehow, I missed reading all of the debug report.
> >>> I am very new to Linux and having a hard time interpreting all of the
> >> Debug
> >>> report.
> >>> However, After going through the errors:
> >>>
> >>> 1. I can say that the username is not being used twice.Even,
> created
> >>> another user profile with username "krishnachaitanya" and getting
> >> the same
> >>> error message when running the radtest.
> >>> 2. In the next test run, modified "base_dn" details as
> >>> 'O=QI-CAP.COM,CN=Certificate
> >>> Authority' and the test resulted in the below error.After
> reviewing
> >> the
> >>> highlighted errors, finding it confused to understand and not
> really
> >> sure
> >>> the fix for these errors.As far as I know, PAP can read only clear
> >> text
> >>> passwords and in mycase the passwords are not encrypted when
> running
> >> the
> >>> radtest command as "radtest krishnachaitanya *Freeip at 1234
> >> *122.1.5.84
> >>> 1812 testing123" and not sure why am seeing PAP password errors.
> >>> 3. and I am not sure why am seeing the messages "(0) ldap: Waiting
> >> for
> >>> search result...
> >>> (0) ldap: The specified DN wasn't found
> >>> (0) ldap: Search returned no results" when "rlm_ldap bind is
> >> successful".
> >>> Is there any relation between them?
> >>>
> >>> *Please help!*
> >>>
> >>> [Ready to process requests
> >>> (0) Received Access-Request Id 252 from 122.1.5.84:55576 to
> >> 122.1.5.84:1812
> >>> length 86
> >>> (0) User-Name = "krishnachaitanya"
> >>> (0) User-Password = "Freeip at 1234"
> >>> (0) NAS-IP-Address = 122.1.5.84
> >>> (0) NAS-Port = 1812
> >>> (0) Message-Authenticator = 0x7d7802787a4d84809dbcd42a46873fe6
> >>> (0) # Executing section authorize from file
> >> /etc/raddb/sites-enabled/default
> >>> (0) authorize {
> >>> (0) policy filter_username {
> >>> (0) if (&User-Name) {
> >>> (0) if (&User-Name) -> TRUE
> >>> (0) if (&User-Name) {
> >>> (0) if (&User-Name =~ / /) {
> >>> (0) if (&User-Name =~ / /) -> FALSE
> >>> (0) if (&User-Name =~ /@[^@]*@/ ) {
> >>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> >>> (0) if (&User-Name =~ /\.\./ ) {
> >>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> >>> (0) if ((&User-Name =~ /@/) && (&User-Name !~
> /@(.+)\.(.+)$/)) {
> >>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> >> ->
> >>> FALSE
> >>> (0) if (&User-Name =~ /\.$/) {
> >>> (0) if (&User-Name =~ /\.$/) -> FALSE
> >>> (0) if (&User-Name =~ /@\./) {
> >>> (0) if (&User-Name =~ /@\./) -> FALSE
> >>> (0) } # if (&User-Name) = notfound
> >>> (0) } # policy filter_username = notfound
> >>> (0) [preprocess] = ok
> >>> (0) [chap] = noop
> >>> (0) [mschap] = noop
> >>> (0) [digest] = noop
> >>> (0) suffix: Checking for suffix after "@"
> >>> (0) suffix: No '@' in User-Name = "krishnachaitanya", looking up realm
> >> NULL
> >>> (0) suffix: No such realm "NULL"
> >>> (0) [suffix] = noop
> >>> (0) eap: No EAP-Message, not doing EAP
> >>> (0) [eap] = noop
> >>> (0) [files] = noop
> >>> rlm_ldap (ldap): Reserved connection (0)
> >>> (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
> >>> (0) ldap: --> (uid=krishnachaitanya)
> >>> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate Authority"
> >> with
> >>> filter "(uid=krishnachaitanya)", scope "sub"
> >>> (0) ldap: Waiting for search result...
> >>> (0) ldap: The specified DN wasn't found
> >>> (0) ldap: Search returned no results
> >>> rlm_ldap (ldap): Released connection (0)
> >>> Need 5 more connections to reach 10 spares
> >>> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending
> slots
> >>> used
> >>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389
> >>> rlm_ldap (ldap): Waiting for bind result...
> >>> rlm_ldap (ldap): Bind successful
> >>> (0) [ldap] = notfound
> >>> (0) if ((ok || updated) && User-Password) {
> >>> (0) if ((ok || updated) && User-Password) -> FALSE
> >>> (0) [expiration] = noop
> >>> (0) [logintime] = noop
> >>> (0) pap: WARNING: No "known good" password found for the user. Not
> >> setting
> >>> Auth-Type
> >>> (0) pap: WARNING: Authentication will fail unless a "known good"
> password
> >>> is available
> >>> (0) [pap] = noop
> >>> (0) } # authorize = ok
> >>> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
> >>> Reject
> >>> (0) Failed to authenticate the user
> >>> (0) Using Post-Auth-Type Reject
> >>> (0) # Executing group from file /etc/raddb/sites-enabled/default
> >>> (0) Post-Auth-Type REJECT {
> >>> (0) attr_filter.access_reject: EXPAND %{User-Name}
> >>> (0) attr_filter.access_reject: --> krishnachaitanya
> >>> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
> >>> (0) [attr_filter.access_reject] = updated
> >>> (0) [eap] = noop
> >>> (0) policy remove_reply_message_if_eap {
> >>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
> >>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
> >>> (0) else {
> >>> (0) [noop] = noop
> >>> (0) } # else = noop
> >>> (0) } # policy remove_reply_message_if_eap = noop
> >>> (0) } # Post-Auth-Type REJECT = updated
> >>> (0) Delaying response for 1.000000 seconds
> >>> Waking up in 0.2 seconds.
> >>> Waking up in 0.7 seconds.
> >>> (0) Sending delayed response
> >>> (0) Sent Access-Reject Id 252 from 122.1.5.84:1812 to 122.1.5.84:55576
> >>> length 20
> >>> Waking up in 3.9 seconds.
> >>> (0) Cleaning up request packet ID 252 with timestamp +5
> >>> Ready to process requests
> >>>
> >>>
> >>> *Krishna Chaitanya Ala*
> >>> *Network and Operations Engineer*
> >>>
> >>>
> >>>
> >>> On Fri, 8 Jul 2022 at 16:27, Matthew Newton <mcn at freeradius.org>
> wrote:
> >>>
> >>>> On 08/07/2022 11:45, Krishna Chaitanya wrote:
> >>>>> # search result
> >>>>> search: 2
> >>>>> result: 0 Success
> >>>>>
> >>>>> # numResponses: 3
> >>>>> # numEntries: 2
> >>>>> *(0) ldap: ERROR: Ambiguous search result, returned 2 unsorted
> entries
> >>>>> (should return 1 or 0). Enable sorting, or specify a more
> restrictive
> >>>>> base_dn, filter or scope(0) ldap: ERROR: The following entries were
> >>>>> returned:(0) ldap: ERROR:
> >>>>> uid=admin,cn=users,cn=compat,dc=qi-cap,dc=com(0) ldap: ERROR:
> >>>>> uid=admin,cn=users,cn=accounts,dc=qi-cap,dc=com*
> >>>>> rlm_ldap (ldap): Released connection (0)
> >>>>> Need 5 more connections to reach 10 spares
> >>>> Did you read the debug output?
> >>>>
> >>>> You have two users with the same uid. FreeRADIUS won't have any idea
> >>>> which one you want.
> >>>>
> >>>> So you need to either not use the same username twice, or configure
> >>>> FreeRADIUS with a more restrictive base DN so that it only finds one
> of
> >>>> them.
> >>>>
> >>>> --
> >>>> Matthew
> >>>> -
> >>>> List info/subscribe/unsubscribe? See
> >>>> http://www.freeradius.org/list/users.html
> >>>>
> >>> -
> >>> List info/subscribe/unsubscribe? See
> >> http://www.freeradius.org/list/users.html
> >>
> >>
> >>
> >> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate Authority"
> >> with
> >> filter "(uid=krishnachaitanya)", scope "sub"
> >> (0) ldap: Waiting for search result...
> >> (0) ldap: The specified DN wasn't found
> >> (0) ldap: Search returned no results
> >>
> >> The user is not found in the LDAP. Do you use uid? oder cn? Wrong part
> of
> >> the tree? Whif is the LDIF of your user?
> >> Can you do a manual ldapsearch for the user?
> >>
> >>
> >> Mit freundlichen Grüßen,
> >>
> >> --
> >>
> >> [*] sys4 AG
> >>
> >> https://sys4.de, +49 (89) 30 90 46 64
> >> Schleißheimer Straße 26/MG,80333 München
> >>
> >> Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
> >> Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
> >> Aufsichtsratsvorsitzender: Florian Kirstein
> >>
> >> -
> >> List info/subscribe/unsubscribe? See
> >> http://www.freeradius.org/list/users.html
> >>
>
> With ldapsearch you find the object in:
>
> dn: uid=krishnachaitanya,cn=users,cn=compat,dc=qi-cap,dc=com
>
>
> FR searches in (from the logging):
>
> (0) ldap: Performing search in "O=QI-CAP.COM,CN=Certificate
> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com" with
> filter "(uid=krishnachaitanya)", scope "sub"
>
> You see the difference?
>
> Mit freundlichen Grüßen,
>
> --
>
> [*] sys4 AG
>
> https://sys4.de, +49 (89) 30 90 46 64
> Schleißheimer Straße 26/MG,80333 München
>
> Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
> Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
> Aufsichtsratsvorsitzender: Florian Kirstein
>
>
More information about the Freeradius-Users
mailing list