FreeRadius and FreeIpa integration not working in our Lab setup
Michael Schwartzkopff
ms at sys4.de
Thu Jul 14 06:57:39 UTC 2022
What is unclear about the log message:
Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.136
Muchael
14.07.2022 08:47:56 Krishna Chaitanya <krishna.chaitanya at qi-cap.com>:
> Thanks very much Michael for your help and after making those changes, I was able to see an Accept message from FreeRadius.
> However, when trying to authenticate wireless using Freeradius I can see something like below.
> Please suggest!!
> ==============================================
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on proxy address * port 34082
> Listening on proxy address :: port 42473
> Ready to process requests
> Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.89 port 49457 proto udp
> Ready to process requests
> Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.89 port 49457 proto udp
> Ready to process requests
> Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.89 port 49457 proto udp
> Ready to process requests
> Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.89 port 49457 proto udp
> Ready to process requests
> Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.89 port 49457 proto udp
> Ready to process requests
> Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.89 port 49457 proto udp
> Ready to process requests
> Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.89 port 49457 proto udp
> Ready to process requests
> Ignoring request to auth address * port 1812 bound to server default from unknown client 122.1.5.136 port 37235 proto udp
> Ready to process requests
>
> Thanks
> Krishna
>
>
> *
> *
>
> On Wed, 13 Jul 2022 at 17:03, Michael Schwartzkopff <ms at sys4.de> wrote:
>> On 13.07.22 12:59, Krishna Chaitanya wrote:
>>> Michael,
>>> The manual search is giving expected results but not sure why I am seeing 2
>>> search results.
>>> Please find the below radtest results along with the manual ldap search
>>> report.
>>>
>>> ================================================================
>>> [admin at freeradius raddb]$ ldapsearch -x uid=*krishnachaitanya*
>>> # extended LDIF
>>> #
>>> # LDAPv3
>>> # base <dc=qi-cap,dc=com> (default) with scope subtree
>>> # filter: uid=krishnachaitanya
>>> # requesting: ALL
>>> #
>>>
>>> # krishnachaitanya, users, compat, qi-cap.com[http://qi-cap.com]
>>> dn: uid=krishnachaitanya,cn=users,cn=compat,dc=qi-cap,dc=com
>>> objectClass: posixAccount
>>> objectClass: ipaOverrideTarget
>>> objectClass: top
>>> gecos: Krishna Ala
>>> cn: Krishna Ala
>>> uidNumber: 1283800005
>>> gidNumber: 1283800005
>>> loginShell: /bin/sh
>>> homeDirectory: /home/krishnachaitanya
>>> ipaAnchorUUID::
>>> OklQQTpxaS1jYXAuY29tOmY1N2IxYTcyLWZlYjAtMTFlYy04MWYxLTA4MDAyNz
>>> M2ZWMzOQ==
>>> uid: krishnachaitanya
>>>
>>> # krishnachaitanya, users, accounts, qi-cap.com[http://qi-cap.com]
>>> dn: uid=krishnachaitanya,cn=users,cn=accounts,dc=qi-cap,dc=com
>>> givenName: Krishna
>>> sn: Ala
>>> uid: krishnachaitanya
>>> cn: Krishna Ala
>>> displayName: Krishna Ala
>>> initials: KA
>>> gecos: Krishna Ala
>>> objectClass: top
>>> objectClass: person
>>> objectClass: organizationalperson
>>> objectClass: inetorgperson
>>> objectClass: inetuser
>>> objectClass: posixaccount
>>> objectClass: krbprincipalaux
>>> objectClass: krbticketpolicyaux
>>> objectClass: ipaobject
>>> objectClass: ipasshuser
>>> objectClass: ipaSshGroupOfPubKeys
>>> objectClass: mepOriginEntry
>>> objectClass: ipantuserattrs
>>> loginShell: /bin/sh
>>> homeDirectory: /home/krishnachaitanya
>>> uidNumber: 1283800005
>>> gidNumber: 1283800005
>>> ipaNTSecurityIdentifier: S-1-5-21-2716401607-2924185208-1841578509-1005
>>>
>>> # search result
>>> search: 2
>>> result: 0 Success
>>>
>>> # numResponses: 3
>>> # numEntries: 2
>>> ===============================================================================================
>>> [root at freeradius admin]# radiusd -X
>>> FreeRADIUS Version 3.0.21
>>> Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
>>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>>> PARTICULAR PURPOSE
>>> You may redistribute copies of FreeRADIUS under the terms of the
>>> GNU General Public License
>>> For more information about these matters, see the file named COPYRIGHT
>>> Starting - reading configuration files ...
>>> including dictionary file /usr/share/freeradius/dictionary
>>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>>> including dictionary file /usr/share/freeradius/dictionary.vqp
>>> including dictionary file /etc/raddb/dictionary
>>> including configuration file /etc/raddb/radiusd.conf
>>> including configuration file /etc/raddb/proxy.conf
>>> including configuration file /etc/raddb/clients.conf
>>> including files in directory /etc/raddb/mods-enabled/
>>> including configuration file /etc/raddb/mods-enabled/always
>>> including configuration file /etc/raddb/mods-enabled/attr_filter
>>> including configuration file /etc/raddb/mods-enabled/cache_eap
>>> including configuration file /etc/raddb/mods-enabled/chap
>>> including configuration file /etc/raddb/mods-enabled/date
>>> including configuration file /etc/raddb/mods-enabled/detail
>>> including configuration file /etc/raddb/mods-enabled/detail.log
>>> including configuration file /etc/raddb/mods-enabled/digest
>>> including configuration file /etc/raddb/mods-enabled/dynamic_clients
>>> including configuration file /etc/raddb/mods-enabled/eap
>>> including configuration file /etc/raddb/mods-enabled/echo
>>> including configuration file /etc/raddb/mods-enabled/exec
>>> including configuration file /etc/raddb/mods-enabled/expiration
>>> including configuration file /etc/raddb/mods-enabled/expr
>>> including configuration file /etc/raddb/mods-enabled/files
>>> including configuration file /etc/raddb/mods-enabled/linelog
>>> including configuration file /etc/raddb/mods-enabled/logintime
>>> including configuration file /etc/raddb/mods-enabled/mschap
>>> including configuration file /etc/raddb/mods-enabled/ntlm_auth
>>> including configuration file /etc/raddb/mods-enabled/pap
>>> including configuration file /etc/raddb/mods-enabled/passwd
>>> including configuration file /etc/raddb/mods-enabled/preprocess
>>> including configuration file /etc/raddb/mods-enabled/radutmp
>>> including configuration file /etc/raddb/mods-enabled/realm
>>> including configuration file /etc/raddb/mods-enabled/replicate
>>> including configuration file /etc/raddb/mods-enabled/soh
>>> including configuration file /etc/raddb/mods-enabled/sradutmp
>>> including configuration file /etc/raddb/mods-enabled/unix
>>> including configuration file /etc/raddb/mods-enabled/unpack
>>> including configuration file /etc/raddb/mods-enabled/utf8
>>> including configuration file /etc/raddb/mods-enabled/ldap
>>> including files in directory /etc/raddb/policy.d/
>>> including configuration file /etc/raddb/policy.d/accounting
>>> including configuration file /etc/raddb/policy.d/canonicalization
>>> including configuration file /etc/raddb/policy.d/control
>>> including configuration file /etc/raddb/policy.d/cui
>>> including configuration file /etc/raddb/policy.d/debug
>>> including configuration file /etc/raddb/policy.d/dhcp
>>> including configuration file /etc/raddb/policy.d/eap
>>> including configuration file /etc/raddb/policy.d/filter
>>> including configuration file /etc/raddb/policy.d/operator-name
>>> including configuration file /etc/raddb/policy.d/rfc7542
>>> including files in directory /etc/raddb/sites-enabled/
>>> including configuration file /etc/raddb/sites-enabled/default
>>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>>> main {
>>> security {
>>> user = "radiusd"
>>> group = "radiusd"
>>> allow_core_dumps = no
>>> }
>>> name = "radiusd"
>>> prefix = "/usr"
>>> localstatedir = "/var"
>>> logdir = "/var/log/radius"
>>> run_dir = "/var/run/radiusd"
>>> }
>>> main {
>>> name = "radiusd"
>>> prefix = "/usr"
>>> localstatedir = "/var"
>>> sbindir = "/usr/sbin"
>>> logdir = "/var/log/radius"
>>> run_dir = "/var/run/radiusd"
>>> libdir = "/usr/lib64/freeradius"
>>> radacctdir = "/var/log/radius/radacct"
>>> hostname_lookups = no
>>> max_request_time = 30
>>> cleanup_delay = 5
>>> max_requests = 16384
>>> pidfile = "/var/run/radiusd/radiusd.pid"
>>> checkrad = "/usr/sbin/checkrad"
>>> debug_level = 0
>>> proxy_requests = yes
>>> log {
>>> stripped_names = no
>>> auth = no
>>> auth_badpass = no
>>> auth_goodpass = no
>>> colourise = yes
>>> msg_denied = "You are already logged in - access denied"
>>> }
>>> resources {
>>> }
>>> security {
>>> max_attributes = 200
>>> reject_delay = 1.000000
>>> status_server = yes
>>> }
>>> }
>>> radiusd: #### Loading Realms and Home Servers ####
>>> proxy server {
>>> retry_delay = 5
>>> retry_count = 3
>>> default_fallback = no
>>> dead_time = 120
>>> wake_all_if_all_dead = no
>>> }
>>> home_server localhost {
>>> ipaddr = 127.0.0.1
>>> port = 1812
>>> type = "auth"
>>> secret = <<< secret >>>
>>> response_window = 20.000000
>>> response_timeouts = 1
>>> max_outstanding = 65536
>>> zombie_period = 40
>>> status_check = "status-server"
>>> ping_interval = 30
>>> check_interval = 30
>>> check_timeout = 4
>>> num_answers_to_alive = 3
>>> revive_interval = 120
>>> limit {
>>> max_connections = 16
>>> max_requests = 0
>>> lifetime = 0
>>> idle_timeout = 0
>>> }
>>> coa {
>>> irt = 2
>>> mrt = 16
>>> mrc = 5
>>> mrd = 30
>>> }
>>> }
>>> home_server_pool my_auth_failover {
>>> type = fail-over
>>> home_server = localhost
>>> }
>>> realm example.com[http://example.com] {
>>> auth_pool = my_auth_failover
>>> }
>>> realm LOCAL {
>>> }
>>> radiusd: #### Loading Clients ####
>>> client localhost {
>>> ipaddr = 122.1.5.84
>>> require_message_authenticator = no
>>> secret = <<< secret >>>
>>> nas_type = "other"
>>> proto = "*"
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> client localhost_ipv6 {
>>> ipv6addr = ::1
>>> require_message_authenticator = no
>>> secret = <<< secret >>>
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> Debugger not attached
>>> # Creating Auth-Type = mschap
>>> # Creating Auth-Type = digest
>>> # Creating Auth-Type = eap
>>> # Creating Auth-Type = PAP
>>> # Creating Auth-Type = CHAP
>>> # Creating Auth-Type = MS-CHAP
>>> # Creating Auth-Type = LDAP
>>> radiusd: #### Instantiating modules ####
>>> modules {
>>> # Loaded module rlm_always
>>> # Loading module "reject" from file /etc/raddb/mods-enabled/always
>>> always reject {
>>> rcode = "reject"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "fail" from file /etc/raddb/mods-enabled/always
>>> always fail {
>>> rcode = "fail"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "ok" from file /etc/raddb/mods-enabled/always
>>> always ok {
>>> rcode = "ok"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "handled" from file /etc/raddb/mods-enabled/always
>>> always handled {
>>> rcode = "handled"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "invalid" from file /etc/raddb/mods-enabled/always
>>> always invalid {
>>> rcode = "invalid"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "userlock" from file /etc/raddb/mods-enabled/always
>>> always userlock {
>>> rcode = "userlock"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "notfound" from file /etc/raddb/mods-enabled/always
>>> always notfound {
>>> rcode = "notfound"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "noop" from file /etc/raddb/mods-enabled/always
>>> always noop {
>>> rcode = "noop"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loading module "updated" from file /etc/raddb/mods-enabled/always
>>> always updated {
>>> rcode = "updated"
>>> simulcount = 0
>>> mpp = no
>>> }
>>> # Loaded module rlm_attr_filter
>>> # Loading module "attr_filter.post-proxy" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.post-proxy {
>>> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
>>> key = "%{Realm}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.pre-proxy" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.pre-proxy {
>>> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
>>> key = "%{Realm}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.access_reject" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.access_reject {
>>> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
>>> key = "%{User-Name}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.access_challenge" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.access_challenge {
>>> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
>>> key = "%{User-Name}"
>>> relaxed = no
>>> }
>>> # Loading module "attr_filter.accounting_response" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> attr_filter attr_filter.accounting_response {
>>> filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
>>> key = "%{User-Name}"
>>> relaxed = no
>>> }
>>> # Loaded module rlm_cache
>>> # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
>>> cache cache_eap {
>>> driver = "rlm_cache_rbtree"
>>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>>> ttl = 15
>>> max_entries = 0
>>> epoch = 0
>>> add_stats = no
>>> }
>>> # Loaded module rlm_chap
>>> # Loading module "chap" from file /etc/raddb/mods-enabled/chap
>>> # Loaded module rlm_date
>>> # Loading module "date" from file /etc/raddb/mods-enabled/date
>>> date {
>>> format = "%b %e %Y %H:%M:%S %Z"
>>> utc = no
>>> }
>>> # Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
>>> date wispr2date {
>>> format = "%Y-%m-%dT%H:%M:%S"
>>> utc = no
>>> }
>>> # Loaded module rlm_detail
>>> # Loading module "detail" from file /etc/raddb/mods-enabled/detail
>>> detail {
>>> filename =
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
>>> detail auth_log {
>>> filename =
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
>>> detail reply_log {
>>> filename =
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "pre_proxy_log" from file
>>> /etc/raddb/mods-enabled/detail.log
>>> detail pre_proxy_log {
>>> filename =
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loading module "post_proxy_log" from file
>>> /etc/raddb/mods-enabled/detail.log
>>> detail post_proxy_log {
>>> filename =
>>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>>> header = "%t"
>>> permissions = 384
>>> locking = no
>>> escape_filenames = no
>>> log_packet_header = no
>>> }
>>> # Loaded module rlm_digest
>>> # Loading module "digest" from file /etc/raddb/mods-enabled/digest
>>> # Loaded module rlm_dynamic_clients
>>> # Loading module "dynamic_clients" from file
>>> /etc/raddb/mods-enabled/dynamic_clients
>>> # Loaded module rlm_eap
>>> # Loading module "eap" from file /etc/raddb/mods-enabled/eap
>>> eap {
>>> default_eap_type = "md5"
>>> timer_expire = 60
>>> ignore_unknown_eap_types = no
>>> cisco_accounting_username_bug = no
>>> max_sessions = 16384
>>> }
>>> # Loaded module rlm_exec
>>> # Loading module "echo" from file /etc/raddb/mods-enabled/echo
>>> exec echo {
>>> wait = yes
>>> program = "/bin/echo %{User-Name}"
>>> input_pairs = "request"
>>> output_pairs = "reply"
>>> shell_escape = yes
>>> }
>>> # Loading module "exec" from file /etc/raddb/mods-enabled/exec
>>> exec {
>>> wait = no
>>> input_pairs = "request"
>>> shell_escape = yes
>>> timeout = 10
>>> }
>>> # Loaded module rlm_expiration
>>> # Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
>>> # Loaded module rlm_expr
>>> # Loading module "expr" from file /etc/raddb/mods-enabled/expr
>>> expr {
>>> safe_characters =
>>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
>>> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>>> }
>>> # Loaded module rlm_files
>>> # Loading module "files" from file /etc/raddb/mods-enabled/files
>>> files {
>>> filename = "/etc/raddb/mods-config/files/authorize"
>>> acctusersfile = "/etc/raddb/mods-config/files/accounting"
>>> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
>>> }
>>> # Loaded module rlm_linelog
>>> # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
>>> linelog {
>>> filename = "/var/log/radius/linelog"
>>> escape_filenames = no
>>> syslog_severity = "info"
>>> permissions = 384
>>> format = "This is a log message for %{User-Name}"
>>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>>> }
>>> # Loading module "log_accounting" from file
>>> /etc/raddb/mods-enabled/linelog
>>> linelog log_accounting {
>>> filename = "/var/log/radius/linelog-accounting"
>>> escape_filenames = no
>>> syslog_severity = "info"
>>> permissions = 384
>>> format = ""
>>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>>> }
>>> # Loaded module rlm_logintime
>>> # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
>>> logintime {
>>> minimum_timeout = 60
>>> }
>>> # Loaded module rlm_mschap
>>> # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
>>> mschap {
>>> use_mppe = yes
>>> require_encryption = no
>>> require_strong = no
>>> with_ntdomain_hack = yes
>>> passchange {
>>> }
>>> allow_retry = yes
>>> winbind_retry_with_normalised_username = no
>>> }
>>> # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
>>> exec ntlm_auth {
>>> wait = yes
>>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
>>> --username=%{mschap:User-Name} --password=%{User-Password}"
>>> shell_escape = yes
>>> }
>>> # Loaded module rlm_pap
>>> # Loading module "pap" from file /etc/raddb/mods-enabled/pap
>>> pap {
>>> normalise = yes
>>> }
>>> # Loaded module rlm_passwd
>>> # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
>>> passwd etc_passwd {
>>> filename = "/etc/passwd"
>>> format = "*User-Name:Crypt-Password:"
>>> delimiter = ":"
>>> ignore_nislike = no
>>> ignore_empty = yes
>>> allow_multiple_keys = no
>>> hash_size = 100
>>> }
>>> # Loaded module rlm_preprocess
>>> # Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
>>> preprocess {
>>> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
>>> hints = "/etc/raddb/mods-config/preprocess/hints"
>>> with_ascend_hack = no
>>> ascend_channels_per_line = 23
>>> with_ntdomain_hack = no
>>> with_specialix_jetstream_hack = no
>>> with_cisco_vsa_hack = no
>>> with_alvarion_vsa_hack = no
>>> }
>>> # Loaded module rlm_radutmp
>>> # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
>>> radutmp {
>>> filename = "/var/log/radius/radutmp"
>>> username = "%{User-Name}"
>>> case_sensitive = yes
>>> check_with_nas = yes
>>> permissions = 384
>>> caller_id = yes
>>> }
>>> # Loaded module rlm_realm
>>> # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
>>> realm IPASS {
>>> format = "prefix"
>>> delimiter = "/"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
>>> realm suffix {
>>> format = "suffix"
>>> delimiter = "@"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
>>> realm bangpath {
>>> format = "prefix"
>>> delimiter = "!"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
>>> realm realmpercent {
>>> format = "suffix"
>>> delimiter = "%"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
>>> realm ntdomain {
>>> format = "prefix"
>>> delimiter = "\\"
>>> ignore_default = no
>>> ignore_null = no
>>> }
>>> # Loaded module rlm_replicate
>>> # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
>>> # Loaded module rlm_soh
>>> # Loading module "soh" from file /etc/raddb/mods-enabled/soh
>>> soh {
>>> dhcp = yes
>>> }
>>> # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
>>> radutmp sradutmp {
>>> filename = "/var/log/radius/sradutmp"
>>> username = "%{User-Name}"
>>> case_sensitive = yes
>>> check_with_nas = yes
>>> permissions = 420
>>> caller_id = no
>>> }
>>> # Loaded module rlm_unix
>>> # Loading module "unix" from file /etc/raddb/mods-enabled/unix
>>> unix {
>>> radwtmp = "/var/log/radius/radwtmp"
>>> }
>>> Creating attribute Unix-Group
>>> # Loaded module rlm_unpack
>>> # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
>>> # Loaded module rlm_utf8
>>> # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
>>> # Loaded module rlm_ldap
>>> # Loading module "ldap" from file /etc/raddb/mods-enabled/ldap
>>> ldap {
>>> server = "122.1.5.84"
>>> sasl {
>>> }
>>> user_dn = "LDAP-UserDn"
>>> user {
>>> scope = "sub"
>>> access_positive = yes
>>> sasl {
>>> }
>>> }
>>> group {
>>> filter = "(objectClass=posixGroup)"
>>> scope = "sub"
>>> name_attribute = "cn"
>>> membership_attribute = "memberOf"
>>> cacheable_name = no
>>> cacheable_dn = no
>>> allow_dangling_group_ref = no
>>> }
>>> client {
>>> filter = "(objectClass=radiusClient)"
>>> scope = "sub"
>>> base_dn = "O=QI-CAP.COM[http://QI-CAP.COM],CN=Certificate
>>> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com"
>>> }
>>> profile {
>>> }
>>> options {
>>> ldap_debug = 40
>>> chase_referrals = yes
>>> rebind = yes
>>> net_timeout = 1
>>> res_timeout = 10
>>> srv_timelimit = 3
>>> idle = 60
>>> probes = 3
>>> interval = 3
>>> }
>>> tls {
>>> start_tls = no
>>> }
>>> }
>>> Creating attribute LDAP-Group
>>> instantiate {
>>> }
>>> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
>>> # Instantiating module "attr_filter.post-proxy" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
>>> # Instantiating module "attr_filter.pre-proxy" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
>>> # Instantiating module "attr_filter.access_reject" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
>>> # Instantiating module "attr_filter.access_challenge" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
>>> # Instantiating module "attr_filter.accounting_response" from file
>>> /etc/raddb/mods-enabled/attr_filter
>>> reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
>>> # Instantiating module "cache_eap" from file
>>> /etc/raddb/mods-enabled/cache_eap
>>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
>>> loaded and linked
>>> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
>>> # Instantiating module "auth_log" from file
>>> /etc/raddb/mods-enabled/detail.log
>>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
>>> detail output
>>> # Instantiating module "reply_log" from file
>>> /etc/raddb/mods-enabled/detail.log
>>> # Instantiating module "pre_proxy_log" from file
>>> /etc/raddb/mods-enabled/detail.log
>>> # Instantiating module "post_proxy_log" from file
>>> /etc/raddb/mods-enabled/detail.log
>>> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
>>> # Linked to sub-module rlm_eap_md5
>>> # Linked to sub-module rlm_eap_leap
>>> # Linked to sub-module rlm_eap_gtc
>>> gtc {
>>> challenge = "Password: "
>>> auth_type = "PAP"
>>> }
>>> # Linked to sub-module rlm_eap_tls
>>> tls {
>>> tls = "tls-common"
>>> }
>>> tls-config tls-common {
>>> verify_depth = 0
>>> ca_path = "/etc/raddb/certs"
>>> pem_file_type = yes
>>> private_key_file = "/etc/raddb/certs/server.pem"
>>> certificate_file = "/etc/raddb/certs/server.pem"
>>> ca_file = "/etc/raddb/certs/ca.pem"
>>> private_key_password = <<< secret >>>
>>> dh_file = "/etc/raddb/certs/dh"
>>> fragment_size = 1024
>>> include_length = yes
>>> auto_chain = yes
>>> check_crl = no
>>> check_all_crl = no
>>> ca_path_reload_interval = 0
>>> cipher_list = "PROFILE=SYSTEM"
>>> cipher_server_preference = no
>>> reject_unknown_intermediate_ca = no
>>> ecdh_curve = "prime256v1"
>>> disable_tlsv1 = yes
>>> disable_tlsv1_1 = yes
>>> tls_max_version = "1.2"
>>> tls_min_version = "1.2"
>>> cache {
>>> enable = no
>>> lifetime = 24
>>> max_entries = 255
>>> }
>>> verify {
>>> skip_if_ocsp_ok = no
>>> }
>>> ocsp {
>>> enable = no
>>> override_cert_url = yes
>>> url = "http://127.0.0.1/ocsp/"
>>> use_nonce = yes
>>> timeout = 0
>>> softfail = no
>>> }
>>> }
>>> tls: Please use 'tls_min_version' and 'tls_max_version' instead of
>>> 'disable_tlsv1'
>>> tls: Please use 'tls_min_version' and 'tls_max_version' instead of
>>> 'disable_tlsv1_1'
>>> tls: Setting DH parameters from /etc/raddb/certs/dh - this is no longer
>>> necessary.
>>> tls: You should comment out the 'dh_file' configuration item.
>>> # Linked to sub-module rlm_eap_ttls
>>> ttls {
>>> tls = "tls-common"
>>> default_eap_type = "md5"
>>> copy_request_to_tunnel = no
>>> use_tunneled_reply = no
>>> virtual_server = "inner-tunnel"
>>> include_length = yes
>>> require_client_cert = no
>>> }
>>> tls: Using cached TLS configuration from previous invocation
>>> # Linked to sub-module rlm_eap_peap
>>> peap {
>>> tls = "tls-common"
>>> default_eap_type = "mschapv2"
>>> copy_request_to_tunnel = no
>>> use_tunneled_reply = no
>>> proxy_tunneled_request_as_eap = yes
>>> virtual_server = "inner-tunnel"
>>> soh = no
>>> require_client_cert = no
>>> }
>>> tls: Using cached TLS configuration from previous invocation
>>> # Linked to sub-module rlm_eap_mschapv2
>>> mschapv2 {
>>> with_ntdomain_hack = no
>>> send_error = no
>>> }
>>> # Instantiating module "expiration" from file
>>> /etc/raddb/mods-enabled/expiration
>>> # Instantiating module "files" from file /etc/raddb/mods-enabled/files
>>> reading pairlist file /etc/raddb/mods-config/files/authorize
>>> reading pairlist file /etc/raddb/mods-config/files/accounting
>>> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
>>> # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
>>> # Instantiating module "log_accounting" from file
>>> /etc/raddb/mods-enabled/linelog
>>> # Instantiating module "logintime" from file
>>> /etc/raddb/mods-enabled/logintime
>>> # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
>>> rlm_mschap (mschap): using internal authentication
>>> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
>>> # Instantiating module "etc_passwd" from file
>>> /etc/raddb/mods-enabled/passwd
>>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>>> # Instantiating module "preprocess" from file
>>> /etc/raddb/mods-enabled/preprocess
>>> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
>>> reading pairlist file /etc/raddb/mods-config/preprocess/hints
>>> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
>>> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
>>> # Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
>>> # Instantiating module "realmpercent" from file
>>> /etc/raddb/mods-enabled/realm
>>> # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
>>> # Instantiating module "ldap" from file /etc/raddb/mods-enabled/ldap
>>> rlm_ldap: libldap vendor: OpenLDAP, version: 20459
>>> accounting {
>>> reference = "%{tolower:type.%{Acct-Status-Type}}"
>>> }
>>> post-auth {
>>> reference = "."
>>> }
>>> rlm_ldap (ldap): Initialising connection pool
>>> pool {
>>> start = 5
>>> min = 3
>>> max = 32
>>> spare = 10
>>> uses = 0
>>> lifetime = 0
>>> cleanup_interval = 30
>>> idle_timeout = 60
>>> retry_delay = 30
>>> spread = no
>>> }
>>> rlm_ldap (ldap): Opening additional connection (0), 1 of 32 pending slots
>>> used
>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389[http://122.1.5.84:389]
>>> rlm_ldap (ldap): Waiting for bind result...
>>> rlm_ldap (ldap): Bind successful
>>> rlm_ldap (ldap): Opening additional connection (1), 1 of 31 pending slots
>>> used
>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389[http://122.1.5.84:389]
>>> rlm_ldap (ldap): Waiting for bind result...
>>> rlm_ldap (ldap): Bind successful
>>> rlm_ldap (ldap): Opening additional connection (2), 1 of 30 pending slots
>>> used
>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389[http://122.1.5.84:389]
>>> rlm_ldap (ldap): Waiting for bind result...
>>> rlm_ldap (ldap): Bind successful
>>> rlm_ldap (ldap): Opening additional connection (3), 1 of 29 pending slots
>>> used
>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389[http://122.1.5.84:389]
>>> rlm_ldap (ldap): Waiting for bind result...
>>> rlm_ldap (ldap): Bind successful
>>> rlm_ldap (ldap): Opening additional connection (4), 1 of 28 pending slots
>>> used
>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389[http://122.1.5.84:389]
>>> rlm_ldap (ldap): Waiting for bind result...
>>> rlm_ldap (ldap): Bind successful
>>> } # modules
>>> radiusd: #### Loading Virtual Servers ####
>>> server { # from file /etc/raddb/radiusd.conf
>>> } # server
>>> server default { # from file /etc/raddb/sites-enabled/default
>>> # Loading authenticate {...}
>>> # Loading authorize {...}
>>> Ignoring "sql" (see raddb/mods-available/README.rst)
>>> # Loading preacct {...}
>>> # Loading accounting {...}
>>> # Loading post-proxy {...}
>>> # Loading post-auth {...}
>>> } # server default
>>> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>>> # Loading authenticate {...}
>>> # Loading authorize {...}
>>> # Loading session {...}
>>> # Loading post-proxy {...}
>>> # Loading post-auth {...}
>>> # Skipping contents of 'if' as it is always 'false' --
>>> /etc/raddb/sites-enabled/inner-tunnel:341
>>> } # server inner-tunnel
>>> radiusd: #### Opening IP addresses and Ports ####
>>> listen {
>>> type = "auth"
>>> ipaddr = *
>>> port = 0
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> listen {
>>> type = "acct"
>>> ipaddr = *
>>> port = 0
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> listen {
>>> type = "auth"
>>> ipv6addr = ::
>>> port = 0
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> listen {
>>> type = "acct"
>>> ipv6addr = ::
>>> port = 0
>>> limit {
>>> max_connections = 16
>>> lifetime = 0
>>> idle_timeout = 30
>>> }
>>> }
>>> listen {
>>> type = "auth"
>>> ipaddr = 127.0.0.1
>>> port = 18120
>>> }
>>> Listening on auth address * port 1812 bound to server default
>>> Listening on acct address * port 1813 bound to server default
>>> Listening on auth address :: port 1812 bound to server default
>>> Listening on acct address :: port 1813 bound to server default
>>> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
>>> Listening on proxy address * port 43356
>>> Listening on proxy address :: port 50675
>>> Ready to process requests
>>> (0) Received Access-Request Id 11 from 122.1.5.84:43809[http://122.1.5.84:43809] to 122.1.5.84:1812[http://122.1.5.84:1812]
>>> length 86
>>> (0) User-Name = "krishnachaitanya"
>>> (0) User-Password = "Freeip at 1234"
>>> (0) NAS-IP-Address = 122.1.5.84
>>> (0) NAS-Port = 1812
>>> (0) Message-Authenticator = 0x9162e9e3154076ccc69ddab02d33be4e
>>> (0) # Executing section authorize from file /etc/raddb/sites-enabled/default
>>> (0) authorize {
>>> (0) policy filter_username {
>>> (0) if (&User-Name) {
>>> (0) if (&User-Name) -> TRUE
>>> (0) if (&User-Name) {
>>> (0) if (&User-Name =~ / /) {
>>> (0) if (&User-Name =~ / /) -> FALSE
>>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>>> (0) if (&User-Name =~ /\.\./ ) {
>>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
>>> FALSE
>>> (0) if (&User-Name =~ /\.$/) {
>>> (0) if (&User-Name =~ /\.$/) -> FALSE
>>> (0) if (&User-Name =~ /@\./) {
>>> (0) if (&User-Name =~ /@\./) -> FALSE
>>> (0) } # if (&User-Name) = notfound
>>> (0) } # policy filter_username = notfound
>>> (0) [preprocess] = ok
>>> (0) [chap] = noop
>>> (0) [mschap] = noop
>>> (0) [digest] = noop
>>> (0) suffix: Checking for suffix after "@"
>>> (0) suffix: No '@' in User-Name = "krishnachaitanya", looking up realm NULL
>>> (0) suffix: No such realm "NULL"
>>> (0) [suffix] = noop
>>> (0) eap: No EAP-Message, not doing EAP
>>> (0) [eap] = noop
>>> (0) [files] = noop
>>> rlm_ldap (ldap): Reserved connection (0)
>>> (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
>>> (0) ldap: --> (uid=krishnachaitanya)
>>> (0) ldap: Performing search in "O=QI-CAP.COM[http://QI-CAP.COM],CN=Certificate
>>> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com" with
>>> filter "(uid=krishnachaitanya)", scope "sub"
>>> (0) ldap: Waiting for search result...
>>> (0) ldap: The specified DN wasn't found
>>> (0) ldap: Search returned no results
>>> rlm_ldap (ldap): Released connection (0)
>>> Need 5 more connections to reach 10 spares
>>> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
>>> used
>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389[http://122.1.5.84:389]
>>> rlm_ldap (ldap): Waiting for bind result...
>>> rlm_ldap (ldap): Bind successful
>>> (0) [ldap] = notfound
>>> (0) if ((ok || updated) && User-Password) {
>>> (0) if ((ok || updated) && User-Password) -> FALSE
>>> (0) [expiration] = noop
>>> (0) [logintime] = noop
>>> (0) pap: WARNING: No "known good" password found for the user. Not setting
>>> Auth-Type
>>> (0) pap: WARNING: Authentication will fail unless a "known good" password
>>> is available
>>> (0) [pap] = noop
>>> (0) } # authorize = ok
>>> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
>>> Reject
>>> (0) Failed to authenticate the user
>>> (0) Using Post-Auth-Type Reject
>>> (0) # Executing group from file /etc/raddb/sites-enabled/default
>>> (0) Post-Auth-Type REJECT {
>>> (0) attr_filter.access_reject: EXPAND %{User-Name}
>>> (0) attr_filter.access_reject: --> krishnachaitanya
>>> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
>>> (0) [attr_filter.access_reject] = updated
>>> (0) [eap] = noop
>>> (0) policy remove_reply_message_if_eap {
>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>>> (0) else {
>>> (0) [noop] = noop
>>> (0) } # else = noop
>>> (0) } # policy remove_reply_message_if_eap = noop
>>> (0) } # Post-Auth-Type REJECT = updated
>>> (0) Delaying response for 1.000000 seconds
>>> Waking up in 0.1 seconds.
>>> Waking up in 0.8 seconds.
>>> (0) Sending delayed response
>>> (0) Sent Access-Reject Id 11 from 122.1.5.84:1812[http://122.1.5.84:1812] to 122.1.5.84:43809[http://122.1.5.84:43809]
>>> length 20
>>> Waking up in 3.9 seconds.
>>> (0) Cleaning up request packet ID 11 with timestamp +10
>>> Ready to process requests
>>> ============================================================================
>>>
>>> *Krishna Chaitanya Ala*
>>> *Network and Operations Engineer*
>>>
>>> *QI Cap Markets LLP*
>>> *Bangalore,Karnataka*
>>> *Slack : krishna.chaitanya at qi-cap.com <krishna.chaitanya at qi-cap.com>*
>>>
>>>
>>>
>>> On Wed, 13 Jul 2022 at 15:25, Michael Schwartzkopff via Freeradius-Users <
>>> freeradius-users at lists.freeradius.org> wrote:
>>>
>>>> On 13.07.22 11:52, Krishna Chaitanya wrote:
>>>>> Matthew,
>>>>> Not really,Somehow, I missed reading all of the debug report.
>>>>> I am very new to Linux and having a hard time interpreting all of the
>>>> Debug
>>>>> report.
>>>>> However, After going through the errors:
>>>>>
>>>>> 1. I can say that the username is not being used twice.Even, created
>>>>> another user profile with username "krishnachaitanya" and getting
>>>> the same
>>>>> error message when running the radtest.
>>>>> 2. In the next test run, modified "base_dn" details as
>>>>> 'O=QI-CAP.COM[http://QI-CAP.COM],CN=Certificate
>>>>> Authority' and the test resulted in the below error.After reviewing
>>>> the
>>>>> highlighted errors, finding it confused to understand and not really
>>>> sure
>>>>> the fix for these errors.As far as I know, PAP can read only clear
>>>> text
>>>>> passwords and in mycase the passwords are not encrypted when running
>>>> the
>>>>> radtest command as "radtest krishnachaitanya *Freeip at 1234
>>>> *122.1.5.84
>>>>> 1812 testing123" and not sure why am seeing PAP password errors.
>>>>> 3. and I am not sure why am seeing the messages "(0) ldap: Waiting
>>>> for
>>>>> search result...
>>>>> (0) ldap: The specified DN wasn't found
>>>>> (0) ldap: Search returned no results" when "rlm_ldap bind is
>>>> successful".
>>>>> Is there any relation between them?
>>>>>
>>>>> *Please help!*
>>>>>
>>>>> [Ready to process requests
>>>>> (0) Received Access-Request Id 252 from 122.1.5.84:55576[http://122.1.5.84:55576] to
>>>> 122.1.5.84:1812[http://122.1.5.84:1812]
>>>>> length 86
>>>>> (0) User-Name = "krishnachaitanya"
>>>>> (0) User-Password = "Freeip at 1234"
>>>>> (0) NAS-IP-Address = 122.1.5.84
>>>>> (0) NAS-Port = 1812
>>>>> (0) Message-Authenticator = 0x7d7802787a4d84809dbcd42a46873fe6
>>>>> (0) # Executing section authorize from file
>>>> /etc/raddb/sites-enabled/default
>>>>> (0) authorize {
>>>>> (0) policy filter_username {
>>>>> (0) if (&User-Name) {
>>>>> (0) if (&User-Name) -> TRUE
>>>>> (0) if (&User-Name) {
>>>>> (0) if (&User-Name =~ / /) {
>>>>> (0) if (&User-Name =~ / /) -> FALSE
>>>>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>>>>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>>>>> (0) if (&User-Name =~ /\.\./ ) {
>>>>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>>>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>>>>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>>>> ->
>>>>> FALSE
>>>>> (0) if (&User-Name =~ /\.$/) {
>>>>> (0) if (&User-Name =~ /\.$/) -> FALSE
>>>>> (0) if (&User-Name =~ /@\./) {
>>>>> (0) if (&User-Name =~ /@\./) -> FALSE
>>>>> (0) } # if (&User-Name) = notfound
>>>>> (0) } # policy filter_username = notfound
>>>>> (0) [preprocess] = ok
>>>>> (0) [chap] = noop
>>>>> (0) [mschap] = noop
>>>>> (0) [digest] = noop
>>>>> (0) suffix: Checking for suffix after "@"
>>>>> (0) suffix: No '@' in User-Name = "krishnachaitanya", looking up realm
>>>> NULL
>>>>> (0) suffix: No such realm "NULL"
>>>>> (0) [suffix] = noop
>>>>> (0) eap: No EAP-Message, not doing EAP
>>>>> (0) [eap] = noop
>>>>> (0) [files] = noop
>>>>> rlm_ldap (ldap): Reserved connection (0)
>>>>> (0) ldap: EXPAND (uid=%{%{Stripped-User-Name}:-%{User-Name}})
>>>>> (0) ldap: --> (uid=krishnachaitanya)
>>>>> (0) ldap: Performing search in "O=QI-CAP.COM[http://QI-CAP.COM],CN=Certificate Authority"
>>>> with
>>>>> filter "(uid=krishnachaitanya)", scope "sub"
>>>>> (0) ldap: Waiting for search result...
>>>>> (0) ldap: The specified DN wasn't found
>>>>> (0) ldap: Search returned no results
>>>>> rlm_ldap (ldap): Released connection (0)
>>>>> Need 5 more connections to reach 10 spares
>>>>> rlm_ldap (ldap): Opening additional connection (5), 1 of 27 pending slots
>>>>> used
>>>>> rlm_ldap (ldap): Connecting to ldap://122.1.5.84:389[http://122.1.5.84:389]
>>>>> rlm_ldap (ldap): Waiting for bind result...
>>>>> rlm_ldap (ldap): Bind successful
>>>>> (0) [ldap] = notfound
>>>>> (0) if ((ok || updated) && User-Password) {
>>>>> (0) if ((ok || updated) && User-Password) -> FALSE
>>>>> (0) [expiration] = noop
>>>>> (0) [logintime] = noop
>>>>> (0) pap: WARNING: No "known good" password found for the user. Not
>>>> setting
>>>>> Auth-Type
>>>>> (0) pap: WARNING: Authentication will fail unless a "known good" password
>>>>> is available
>>>>> (0) [pap] = noop
>>>>> (0) } # authorize = ok
>>>>> (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type =
>>>>> Reject
>>>>> (0) Failed to authenticate the user
>>>>> (0) Using Post-Auth-Type Reject
>>>>> (0) # Executing group from file /etc/raddb/sites-enabled/default
>>>>> (0) Post-Auth-Type REJECT {
>>>>> (0) attr_filter.access_reject: EXPAND %{User-Name}
>>>>> (0) attr_filter.access_reject: --> krishnachaitanya
>>>>> (0) attr_filter.access_reject: Matched entry DEFAULT at line 11
>>>>> (0) [attr_filter.access_reject] = updated
>>>>> (0) [eap] = noop
>>>>> (0) policy remove_reply_message_if_eap {
>>>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
>>>>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>>>>> (0) else {
>>>>> (0) [noop] = noop
>>>>> (0) } # else = noop
>>>>> (0) } # policy remove_reply_message_if_eap = noop
>>>>> (0) } # Post-Auth-Type REJECT = updated
>>>>> (0) Delaying response for 1.000000 seconds
>>>>> Waking up in 0.2 seconds.
>>>>> Waking up in 0.7 seconds.
>>>>> (0) Sending delayed response
>>>>> (0) Sent Access-Reject Id 252 from 122.1.5.84:1812[http://122.1.5.84:1812] to 122.1.5.84:55576[http://122.1.5.84:55576]
>>>>> length 20
>>>>> Waking up in 3.9 seconds.
>>>>> (0) Cleaning up request packet ID 252 with timestamp +5
>>>>> Ready to process requests
>>>>>
>>>>>
>>>>> *Krishna Chaitanya Ala*
>>>>> *Network and Operations Engineer*
>>>>>
>>>>>
>>>>>
>>>>> On Fri, 8 Jul 2022 at 16:27, Matthew Newton <mcn at freeradius.org> wrote:
>>>>>
>>>>>> On 08/07/2022 11:45, Krishna Chaitanya wrote:
>>>>>>> # search result
>>>>>>> search: 2
>>>>>>> result: 0 Success
>>>>>>>
>>>>>>> # numResponses: 3
>>>>>>> # numEntries: 2
>>>>>>> *(0) ldap: ERROR: Ambiguous search result, returned 2 unsorted entries
>>>>>>> (should return 1 or 0). Enable sorting, or specify a more restrictive
>>>>>>> base_dn, filter or scope(0) ldap: ERROR: The following entries were
>>>>>>> returned:(0) ldap: ERROR:
>>>>>>> uid=admin,cn=users,cn=compat,dc=qi-cap,dc=com(0) ldap: ERROR:
>>>>>>> uid=admin,cn=users,cn=accounts,dc=qi-cap,dc=com*
>>>>>>> rlm_ldap (ldap): Released connection (0)
>>>>>>> Need 5 more connections to reach 10 spares
>>>>>> Did you read the debug output?
>>>>>>
>>>>>> You have two users with the same uid. FreeRADIUS won't have any idea
>>>>>> which one you want.
>>>>>>
>>>>>> So you need to either not use the same username twice, or configure
>>>>>> FreeRADIUS with a more restrictive base DN so that it only finds one of
>>>>>> them.
>>>>>>
>>>>>> --
>>>>>> Matthew
>>>>>> -
>>>>>> List info/subscribe/unsubscribe? See
>>>>>> http://www.freeradius.org/list/users.html
>>>>>>
>>>>> -
>>>>> List info/subscribe/unsubscribe? See
>>>> http://www.freeradius.org/list/users.html
>>>>
>>>>
>>>>
>>>> (0) ldap: Performing search in "O=QI-CAP.COM[http://QI-CAP.COM],CN=Certificate Authority"
>>>> with
>>>> filter "(uid=krishnachaitanya)", scope "sub"
>>>> (0) ldap: Waiting for search result...
>>>> (0) ldap: The specified DN wasn't found
>>>> (0) ldap: Search returned no results
>>>>
>>>> The user is not found in the LDAP. Do you use uid? oder cn? Wrong part of
>>>> the tree? Whif is the LDIF of your user?
>>>> Can you do a manual ldapsearch for the user?
>>>>
>>>>
>>>> Mit freundlichen Grüßen,
>>>>
>>>> --
>>>>
>>>> [*] sys4 AG
>>>>
>>>> https://sys4.de, +49 (89) 30 90 46 64
>>>> Schleißheimer Straße 26/MG,80333 München
>>>>
>>>> Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
>>>> Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
>>>> Aufsichtsratsvorsitzender: Florian Kirstein
>>>>
>>>> -
>>>> List info/subscribe/unsubscribe? See
>>>> http://www.freeradius.org/list/users.html
>>>>
>>
>> With ldapsearch you find the object in:
>>
>> dn: uid=krishnachaitanya,cn=users,cn=compat,dc=qi-cap,dc=com
>>
>>
>> FR searches in (from the logging):
>>
>> (0) ldap: Performing search in "O=QI-CAP.COM[http://QI-CAP.COM],CN=Certificate
>> Authority,cn=users,cn=accounts,dc=qi-cap,uid=krishnachaitanya,dc=com" with
>> filter "(uid=krishnachaitanya)", scope "sub"
>>
>> You see the difference?
>>
>> Mit freundlichen Grüßen,
>>
>> --
>>
>> [*] sys4 AG
>>
>> https://sys4.de, +49 (89) 30 90 46 64
>> Schleißheimer Straße 26/MG,80333 München
>>
>> Sitz der Gesellschaft: München, Amtsgericht München: HRB 199263
>> Vorstand: Patrick Ben Koetter, Marc Schiffbauer, Wolfgang Stief
>> Aufsichtsratsvorsitzender: Florian Kirstein
>>
More information about the Freeradius-Users
mailing list