IPOE
Alexandro Gonçalves Dos Santos
AlexandroGonSan at outlook.com
Tue Jul 19 21:02:50 UTC 2022
> I don't see any radio messages sent from Mikrotik. Check if the udp 1812
> port is open in the firewall on the freeradius server. It also happened to
> me that packets did not arrive until I specified the src ip in the mikrotik
> radius section.
I'm checking for udp port 1812 to be open, udp ports 1813, 42957 (udp6), 18120 (udp), 56344 (udp) also need to be open? i checked that the freeradius listen these ports.
________________________________
De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <g.baronas at gmail.com>
Enviado: terça-feira, 19 de julho de 2022 12:20
Para: FreeRadius users mailing list <freeradius-users at lists.freeradius.org>
Assunto: Re: IPOE
I tried to send a radio message from Mikrotik.
(1) User-Name = "16:81:09:E4:6E:68"
(1) NAS-Port-Type = Ethernet
(1) NAS-Port = 2200961637
(1) Service-Type = Framed-User
(1) Calling-Station-Id = "1:16:81:9:e4:6e:68"
(1) Called-Station-Id = "my_dhcp_server_instance"
(1) User-Password = ""
(1) NAS-Identifier = "Audience1"
(1) NAS-IP-Address = 192.168.222.1
2022-07-19, an, 18:50 Giedrius Baronas <g.baronas at gmail.com> rašė:
> I don't see any radio messages sent from Mikrotik. Check if the udp 1812
> port is open in the firewall on the freeradius server. It also happened
> to me that packets did not arrive until I specified the src ip in the
> mikrotik radius section.
>
> 2022-07-19, an, 01:19 Alexandro Gonçalves Dos Santos <
> AlexandroGonSan at outlook.com> rašė:
>
>> > First, let's find out if you can see radio messages on the freeradius
>> > server.
>> > show the debug output so it's clear where you are.
>>
>> $ sudo freeradius -X
>> FreeRADIUS Version 3.0.21
>> Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>> PARTICULAR PURPOSE
>> You may redistribute copies of FreeRADIUS under the terms of the
>> GNU General Public License
>> For more information about these matters, see the file named COPYRIGHT
>> Starting - reading configuration files ...
>> including dictionary file /usr/share/freeradius/dictionary
>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>> including dictionary file /usr/share/freeradius/dictionary.vqp
>> including dictionary file /etc/freeradius/3.0/dictionary
>> including configuration file /etc/freeradius/3.0/radiusd.conf
>> including configuration file /etc/freeradius/3.0/proxy.conf
>> including configuration file /etc/freeradius/3.0/clients.conf
>> including files in directory /etc/freeradius/3.0/mods-enabled/
>> including configuration file /etc/freeradius/3.0/mods-enabled/unix
>> including configuration file /etc/freeradius/3.0/mods-enabled/always
>> including configuration file /etc/freeradius/3.0/mods-enabled/logintime
>> including configuration file /etc/freeradius/3.0/mods-enabled/attr_filter
>> including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
>> including configuration file /etc/freeradius/3.0/mods-enabled/expr
>> including configuration file /etc/freeradius/3.0/mods-enabled/detail
>> including configuration file /etc/freeradius/3.0/mods-enabled/sql
>> including configuration file
>> /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
>> including configuration file /etc/freeradius/3.0/mods-enabled/replicate
>> including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool
>> including configuration file
>> /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
>> including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
>> including configuration file /etc/freeradius/3.0/mods-enabled/realm
>> including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
>> including configuration file /etc/freeradius/3.0/mods-enabled/soh
>> including configuration file /etc/freeradius/3.0/mods-enabled/digest
>> including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
>> including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
>> including configuration file /etc/freeradius/3.0/mods-enabled/unpack
>> including configuration file /etc/freeradius/3.0/mods-enabled/exec
>> including configuration file /etc/freeradius/3.0/mods-enabled/pap
>> including configuration file /etc/freeradius/3.0/mods-enabled/expiration
>> including configuration file /etc/freeradius/3.0/mods-enabled/utf8
>> including configuration file /etc/freeradius/3.0/mods-enabled/passwd
>> including configuration file /etc/freeradius/3.0/mods-enabled/mschap
>> including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
>> including configuration file /etc/freeradius/3.0/mods-enabled/files
>> including configuration file /etc/freeradius/3.0/mods-enabled/echo
>> including configuration file /etc/freeradius/3.0/mods-enabled/eap
>> including configuration file /etc/freeradius/3.0/mods-enabled/chap
>> including configuration file /etc/freeradius/3.0/mods-enabled/linelog
>> including configuration file
>> /etc/freeradius/3.0/mods-enabled/dynamic_clients
>> including files in directory /etc/freeradius/3.0/policy.d/
>> including configuration file /etc/freeradius/3.0/policy.d/canonicalization
>> including configuration file /etc/freeradius/3.0/policy.d/accounting
>> including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
>> including configuration file /etc/freeradius/3.0/policy.d/dhcp
>> including configuration file /etc/freeradius/3.0/policy.d/filter
>> including configuration file
>> /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
>> including configuration file /etc/freeradius/3.0/policy.d/cui
>> including configuration file /etc/freeradius/3.0/policy.d/operator-name
>> including configuration file /etc/freeradius/3.0/policy.d/debug
>> including configuration file /etc/freeradius/3.0/policy.d/control
>> including configuration file /etc/freeradius/3.0/policy.d/eap
>> including configuration file /etc/freeradius/3.0/policy.d/rfc7542
>> including files in directory /etc/freeradius/3.0/sites-enabled/
>> including configuration file
>> /etc/freeradius/3.0/sites-enabled/inner-tunnel
>> including configuration file /etc/freeradius/3.0/sites-enabled/default
>> main {
>> security {
>> user = "freerad"
>> group = "freerad"
>> allow_core_dumps = no
>> }
>> name = "freeradius"
>> prefix = "/usr"
>> localstatedir = "/var"
>> logdir = "/var/log/freeradius"
>> run_dir = "/var/run/freeradius"
>> }
>> main {
>> name = "freeradius"
>> prefix = "/usr"
>> localstatedir = "/var"
>> sbindir = "/usr/sbin"
>> logdir = "/var/log/freeradius"
>> run_dir = "/var/run/freeradius"
>> libdir = "/usr/lib/freeradius"
>> radacctdir = "/var/log/freeradius/radacct"
>> hostname_lookups = no
>> max_request_time = 30
>> cleanup_delay = 5
>> max_requests = 256000
>> pidfile = "/var/run/freeradius/freeradius.pid"
>> checkrad = "/usr/sbin/checkrad"
>> debug_level = 0
>> proxy_requests = yes
>> log {
>> stripped_names = no
>> auth = no
>> auth_badpass = no
>> auth_goodpass = no
>> colourise = yes
>> msg_denied = "You are already logged in - access denied"
>> }
>> resources {
>> }
>> security {
>> max_attributes = 200
>> reject_delay = 1.000000
>> status_server = yes
>> }
>> }
>> radiusd: #### Loading Realms and Home Servers ####
>> proxy server {
>> retry_delay = 5
>> retry_count = 3
>> default_fallback = no
>> dead_time = 120
>> wake_all_if_all_dead = no
>> }
>> home_server localhost {
>> ipaddr = 127.0.0.1
>> port = 1812
>> type = "auth"
>> secret = <<< secret >>>
>> response_window = 20.000000
>> response_timeouts = 1
>> max_outstanding = 65536
>> zombie_period = 40
>> status_check = "status-server"
>> ping_interval = 30
>> check_interval = 30
>> check_timeout = 4
>> num_answers_to_alive = 3
>> revive_interval = 120
>> limit {
>> max_connections = 16
>> max_requests = 0
>> lifetime = 0
>> idle_timeout = 0
>> }
>> coa {
>> irt = 2
>> mrt = 16
>> mrc = 5
>> mrd = 30
>> }
>> }
>> home_server_pool my_auth_failover {
>> type = fail-over
>> home_server = localhost
>> }
>> realm example.com {
>> auth_pool = my_auth_failover
>> }
>> realm LOCAL {
>> }
>> radiusd: #### Loading Clients ####
>> client localhost {
>> ipaddr = 127.0.0.1
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> nas_type = "other"
>> proto = "*"
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> client localhost_ipv6 {
>> ipv6addr = ::1
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> Debugger not attached
>> systemd watchdog is disabled
>> # Creating Auth-Type = mschap
>> # Creating Auth-Type = eap
>> # Creating Auth-Type = PAP
>> # Creating Auth-Type = CHAP
>> # Creating Auth-Type = MS-CHAP
>> # Creating Auth-Type = digest
>> radiusd: #### Instantiating modules ####
>> modules {
>> # Loaded module rlm_unix
>> # Loading module "unix" from file /etc/freeradius/3.0/mods-enabled/unix
>> unix {
>> radwtmp = "/var/log/freeradius/radwtmp"
>> }
>> Creating attribute Unix-Group
>> # Loaded module rlm_always
>> # Loading module "reject" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> always reject {
>> rcode = "reject"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "fail" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> always fail {
>> rcode = "fail"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "ok" from file /etc/freeradius/3.0/mods-enabled/always
>> always ok {
>> rcode = "ok"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "handled" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> always handled {
>> rcode = "handled"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "invalid" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> always invalid {
>> rcode = "invalid"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "userlock" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> always userlock {
>> rcode = "userlock"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "notfound" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> always notfound {
>> rcode = "notfound"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "noop" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> always noop {
>> rcode = "noop"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "updated" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> always updated {
>> rcode = "updated"
>> simulcount = 0
>> mpp = no
>> }
>> # Loaded module rlm_logintime
>> # Loading module "logintime" from file
>> /etc/freeradius/3.0/mods-enabled/logintime
>> logintime {
>> minimum_timeout = 60
>> }
>> # Loaded module rlm_attr_filter
>> # Loading module "attr_filter.post-proxy" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> attr_filter attr_filter.post-proxy {
>> filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.pre-proxy" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> attr_filter attr_filter.pre-proxy {
>> filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_reject" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> attr_filter attr_filter.access_reject {
>> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_challenge" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> attr_filter attr_filter.access_challenge {
>> filename =
>> "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.accounting_response" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> attr_filter attr_filter.accounting_response {
>> filename =
>> "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loaded module rlm_radutmp
>> # Loading module "radutmp" from file
>> /etc/freeradius/3.0/mods-enabled/radutmp
>> radutmp {
>> filename = "/var/log/freeradius/radutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 384
>> caller_id = yes
>> }
>> # Loaded module rlm_expr
>> # Loading module "expr" from file /etc/freeradius/3.0/mods-enabled/expr
>> expr {
>> safe_characters =
>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
>> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>> }
>> # Loaded module rlm_detail
>> # Loading module "detail" from file
>> /etc/freeradius/3.0/mods-enabled/detail
>> detail {
>> filename =
>> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_sql
>> # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
>> sql {
>> driver = "rlm_sql_mysql"
>> server = "localhost"
>> port = 3306
>> login = "radius"
>> password = <<< secret >>>
>> radius_db = "radius"
>> read_groups = yes
>> read_profiles = yes
>> read_clients = yes
>> delete_stale_sessions = yes
>> sql_user_name = "%{User-Name}"
>> default_user_profile = ""
>> client_query = "SELECT id, nasname, shortname, type, secret, server
>> FROM nas"
>> authorize_check_query = "SELECT id, username, attribute, value, op FROM
>> radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
>> authorize_reply_query = "SELECT id, username, attribute, value, op FROM
>> radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
>> authorize_group_check_query = "SELECT id, groupname, attribute, Value,
>> op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
>> authorize_group_reply_query = "SELECT id, groupname, attribute, value,
>> op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
>> group_membership_query = "SELECT groupname FROM radusergroup WHERE
>> username = '%{SQL-User-Name}' ORDER BY priority"
>> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
>> '%{SQL-User-Name}' AND acctstoptime IS NULL"
>> simul_verify_query = "SELECT radacctid, acctsessionid, username,
>> nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol
>> FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
>> safe_characters =
>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>> auto_escape = no
>> accounting {
>> reference =
>> "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
>> type {
>> accounting-on {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
>> '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
>> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
>> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
>> acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
>> }
>> accounting-off {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
>> '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
>> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
>> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
>> acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
>> }
>> start {
>> query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username,
>> realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime,
>> acctstoptime, acctsessiontime, acctauthentic, connectinfo_start,
>> connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid,
>> callingstationid, acctterminatecause, servicetype, framedprotocol,
>> framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid,
>> delegatedipv6prefix) VALUES ('%{Acct-Session-Id}',
>> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
>> '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}',
>> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}),
>> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0',
>> '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
>> '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
>> '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}',
>> '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}',
>> '%{Delegated-IPv6-Prefix}')"
>> }
>> interim-update {
>> query = "UPDATE radacct SET acctupdatetime =
>> (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
>> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval =
>> %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old),
>> framedipaddress = '%{Framed-IP-Address}', framedipv6address =
>> '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}',
>> framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix =
>> '%{Delegated-IPv6-Prefix}', acctsessiontime =
>> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
>> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
>> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
>> '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
>> '%{Acct-Unique-Session-Id}'"
>> }
>> stop {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
>> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
>> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
>> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
>> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
>> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
>> AcctUniqueId = '%{Acct-Unique-Session-Id}'"
>> }
>> }
>> }
>> post-auth {
>> reference = ".query"
>> query = "INSERT INTO radpostauth (username, pass, reply, authdate)
>> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
>> '%{reply:Packet-Type}', '%S.%M')"
>> }
>> }
>> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
>> linked
>> Creating attribute SQL-Group
>> # Loaded module rlm_replicate
>> # Loading module "replicate" from file
>> /etc/freeradius/3.0/mods-enabled/replicate
>> # Loaded module rlm_sqlippool
>> # Loading module "sqlippool" from file
>> /etc/freeradius/3.0/mods-enabled/sqlippool
>> sqlippool {
>> sql_module_instance = "sql"
>> lease_duration = 3600
>> pool_name = "Pool-Name"
>> default_pool = "main_pool"
>> attribute_name = "Framed-IP-Address"
>> allocate_begin = "START TRANSACTION"
>> allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
>> callingstationid = '', username = '', expiry_time = NULL WHERE expiry_time
>> <= NOW() - INTERVAL 1 SECOND AND nasipaddress =
>> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
>> allocate_clear_timeout = 1
>> allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name
>> = '%{control:Pool-Name}' AND ( expiry_time < NOW() OR expiry_time IS NULL
>> OR expiry_time = 0 OR ( nasipaddress = '%{NAS-IP-Address}' AND pool_key =
>> '%{NAS-Port}' ) ) ORDER BY (username <> '%{User-Name}'), (callingstationid
>> <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
>> allocate_update = "UPDATE radippool SET nasipaddress =
>> '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid =
>> '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW() +
>> INTERVAL 3600 SECOND WHERE framedipaddress = '%I'"
>> allocate_commit = "COMMIT"
>> pool_check = "SELECT id FROM radippool WHERE
>> pool_name='%{control:Pool-Name}' LIMIT 1"
>> start_begin = "START TRANSACTION"
>> start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL
>> 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key =
>> '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid =
>> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
>> start_commit = "COMMIT"
>> alive_begin = "START TRANSACTION"
>> alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL
>> 3600 SECOND WHERE nasipaddress =
>> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
>> AND username = '%{User-Name}' AND callingstationid =
>> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
>> alive_commit = "COMMIT"
>> stop_begin = "START TRANSACTION"
>> stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
>> callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress
>> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
>> AND username = '%{User-Name}' AND callingstationid =
>> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
>> stop_commit = "COMMIT"
>> on_begin = "START TRANSACTION"
>> on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
>> callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress
>> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
>> on_commit = "COMMIT"
>> off_begin = "START TRANSACTION"
>> off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
>> callingstationid = '', username = '', expiry_time = NULL WHERE nasipaddress
>> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
>> off_commit = "COMMIT"
>> messages {
>> exists = "Existing IP: %{reply:Framed-IP-Address} (did
>> %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
>> %{User-Name})"
>> success = "Allocated IP: %{reply:Framed-IP-Address} from
>> %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id}
>> port %{NAS-Port} user %{User-Name})"
>> clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli
>> %{Calling-Station-Id} user %{User-Name})"
>> failed = "IP Allocation FAILED from %{control:Pool-Name} (did
>> %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
>> %{User-Name})"
>> nopool = "No Pool-Name defined (did %{Called-Station-Id} cli
>> %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
>> }
>> }
>> # Loading module "sradutmp" from file
>> /etc/freeradius/3.0/mods-enabled/sradutmp
>> radutmp sradutmp {
>> filename = "/var/log/freeradius/sradutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 420
>> caller_id = no
>> }
>> # Loaded module rlm_realm
>> # Loading module "IPASS" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> realm IPASS {
>> format = "prefix"
>> delimiter = "/"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "suffix" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> realm suffix {
>> format = "suffix"
>> delimiter = "@"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "bangpath" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> realm bangpath {
>> format = "prefix"
>> delimiter = "!"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "realmpercent" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> realm realmpercent {
>> format = "suffix"
>> delimiter = "%"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "ntdomain" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> realm ntdomain {
>> format = "prefix"
>> delimiter = "\\"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loaded module rlm_exec
>> # Loading module "ntlm_auth" from file
>> /etc/freeradius/3.0/mods-enabled/ntlm_auth
>> exec ntlm_auth {
>> wait = yes
>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
>> --username=%{mschap:User-Name} --password=%{User-Password}"
>> shell_escape = yes
>> }
>> # Loaded module rlm_soh
>> # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
>> soh {
>> dhcp = yes
>> }
>> # Loaded module rlm_digest
>> # Loading module "digest" from file
>> /etc/freeradius/3.0/mods-enabled/digest
>> # Loaded module rlm_cache
>> # Loading module "cache_eap" from file
>> /etc/freeradius/3.0/mods-enabled/cache_eap
>> cache cache_eap {
>> driver = "rlm_cache_rbtree"
>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>> ttl = 15
>> max_entries = 0
>> epoch = 0
>> add_stats = no
>> }
>> # Loading module "auth_log" from file
>> /etc/freeradius/3.0/mods-enabled/detail.log
>> detail auth_log {
>> filename =
>> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "reply_log" from file
>> /etc/freeradius/3.0/mods-enabled/detail.log
>> detail reply_log {
>> filename =
>> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "pre_proxy_log" from file
>> /etc/freeradius/3.0/mods-enabled/detail.log
>> detail pre_proxy_log {
>> filename =
>> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "post_proxy_log" from file
>> /etc/freeradius/3.0/mods-enabled/detail.log
>> detail post_proxy_log {
>> filename =
>> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_unpack
>> # Loading module "unpack" from file
>> /etc/freeradius/3.0/mods-enabled/unpack
>> # Loading module "exec" from file /etc/freeradius/3.0/mods-enabled/exec
>> exec {
>> wait = no
>> input_pairs = "request"
>> shell_escape = yes
>> timeout = 10
>> }
>> # Loaded module rlm_pap
>> # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
>> pap {
>> normalise = yes
>> }
>> # Loaded module rlm_expiration
>> # Loading module "expiration" from file
>> /etc/freeradius/3.0/mods-enabled/expiration
>> # Loaded module rlm_utf8
>> # Loading module "utf8" from file /etc/freeradius/3.0/mods-enabled/utf8
>> # Loaded module rlm_passwd
>> # Loading module "etc_passwd" from file
>> /etc/freeradius/3.0/mods-enabled/passwd
>> passwd etc_passwd {
>> filename = "/etc/passwd"
>> format = "*User-Name:Crypt-Password:"
>> delimiter = ":"
>> ignore_nislike = no
>> ignore_empty = yes
>> allow_multiple_keys = no
>> hash_size = 100
>> }
>> # Loaded module rlm_mschap
>> # Loading module "mschap" from file
>> /etc/freeradius/3.0/mods-enabled/mschap
>> mschap {
>> use_mppe = yes
>> require_encryption = no
>> require_strong = no
>> with_ntdomain_hack = yes
>> passchange {
>> }
>> allow_retry = yes
>> winbind_retry_with_normalised_username = no
>> }
>> # Loaded module rlm_preprocess
>> # Loading module "preprocess" from file
>> /etc/freeradius/3.0/mods-enabled/preprocess
>> preprocess {
>> huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
>> hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
>> with_ascend_hack = no
>> ascend_channels_per_line = 23
>> with_ntdomain_hack = no
>> with_specialix_jetstream_hack = no
>> with_cisco_vsa_hack = no
>> with_alvarion_vsa_hack = no
>> }
>> # Loaded module rlm_files
>> # Loading module "files" from file
>> /etc/freeradius/3.0/mods-enabled/files
>> files {
>> filename = "/etc/freeradius/3.0/mods-config/files/authorize"
>> acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
>> preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
>> }
>> # Loading module "echo" from file /etc/freeradius/3.0/mods-enabled/echo
>> exec echo {
>> wait = yes
>> program = "/bin/echo %{User-Name}"
>> input_pairs = "request"
>> output_pairs = "reply"
>> shell_escape = yes
>> }
>> # Loaded module rlm_eap
>> # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
>> eap {
>> default_eap_type = "md5"
>> timer_expire = 60
>> ignore_unknown_eap_types = no
>> cisco_accounting_username_bug = no
>> max_sessions = 256000
>> }
>> # Loaded module rlm_chap
>> # Loading module "chap" from file /etc/freeradius/3.0/mods-enabled/chap
>> # Loaded module rlm_linelog
>> # Loading module "linelog" from file
>> /etc/freeradius/3.0/mods-enabled/linelog
>> linelog {
>> filename = "/var/log/freeradius/linelog"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = "This is a log message for %{User-Name}"
>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>> }
>> # Loading module "log_accounting" from file
>> /etc/freeradius/3.0/mods-enabled/linelog
>> linelog log_accounting {
>> filename = "/var/log/freeradius/linelog-accounting"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = ""
>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>> }
>> # Loaded module rlm_dynamic_clients
>> # Loading module "dynamic_clients" from file
>> /etc/freeradius/3.0/mods-enabled/dynamic_clients
>> instantiate {
>> }
>> # Instantiating module "reject" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "fail" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "ok" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "handled" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "invalid" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "userlock" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "notfound" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "noop" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "updated" from file
>> /etc/freeradius/3.0/mods-enabled/always
>> # Instantiating module "logintime" from file
>> /etc/freeradius/3.0/mods-enabled/logintime
>> # Instantiating module "attr_filter.post-proxy" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> reading pairlist file
>> /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
>> # Instantiating module "attr_filter.pre-proxy" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> reading pairlist file
>> /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
>> # Instantiating module "attr_filter.access_reject" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> reading pairlist file
>> /etc/freeradius/3.0/mods-config/attr_filter/access_reject
>> # Instantiating module "attr_filter.access_challenge" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> reading pairlist file
>> /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
>> # Instantiating module "attr_filter.accounting_response" from file
>> /etc/freeradius/3.0/mods-enabled/attr_filter
>> reading pairlist file
>> /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
>> # Instantiating module "detail" from file
>> /etc/freeradius/3.0/mods-enabled/detail
>> # Instantiating module "sql" from file
>> /etc/freeradius/3.0/mods-enabled/sql
>> rlm_sql_mysql: libmysql version: 10.5.15
>> mysql {
>> tls {
>> tls_required = no
>> check_cert = no
>> check_cert_cn = no
>> }
>> warnings = "auto"
>> }
>> rlm_sql (sql): Attempting to connect to database "radius"
>> rlm_sql (sql): Initialising connection pool
>> pool {
>> start = 5
>> min = 3
>> max = 32
>> spare = 10
>> uses = 0
>> lifetime = 0
>> cleanup_interval = 30
>> idle_timeout = 60
>> retry_delay = 30
>> spread = no
>> }
>> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
>> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
>> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
>> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
>> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
>> rlm_sql (sql): Processing generate_sql_clients
>> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
>> shortname, type, secret, server FROM nas
>> rlm_sql (sql): Reserved connection (0)
>> rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
>> type, secret, server FROM nas
>> rlm_sql (sql): Adding client 10.10.254.1 (Mikrotik) to global clients list
>> rlm_sql (10.10.254.1): Client "Mikrotik" (sql) added
>> rlm_sql (sql): Released connection (0)
>> Need 5 more connections to reach 10 spares
>> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
>> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
>> # Instantiating module "sqlippool" from file
>> /etc/freeradius/3.0/mods-enabled/sqlippool
>> Ignoring "allocate_clear_timeout = 1", forcing to "allocate_clear_timeout
>> = 1"
>> # Instantiating module "IPASS" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> # Instantiating module "suffix" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> # Instantiating module "bangpath" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> # Instantiating module "realmpercent" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> # Instantiating module "ntdomain" from file
>> /etc/freeradius/3.0/mods-enabled/realm
>> # Instantiating module "cache_eap" from file
>> /etc/freeradius/3.0/mods-enabled/cache_eap
>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
>> loaded and linked
>> # Instantiating module "auth_log" from file
>> /etc/freeradius/3.0/mods-enabled/detail.log
>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
>> detail output
>> # Instantiating module "reply_log" from file
>> /etc/freeradius/3.0/mods-enabled/detail.log
>> # Instantiating module "pre_proxy_log" from file
>> /etc/freeradius/3.0/mods-enabled/detail.log
>> # Instantiating module "post_proxy_log" from file
>> /etc/freeradius/3.0/mods-enabled/detail.log
>> # Instantiating module "pap" from file
>> /etc/freeradius/3.0/mods-enabled/pap
>> # Instantiating module "expiration" from file
>> /etc/freeradius/3.0/mods-enabled/expiration
>> # Instantiating module "etc_passwd" from file
>> /etc/freeradius/3.0/mods-enabled/passwd
>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>> # Instantiating module "mschap" from file
>> /etc/freeradius/3.0/mods-enabled/mschap
>> rlm_mschap (mschap): using internal authentication
>> # Instantiating module "preprocess" from file
>> /etc/freeradius/3.0/mods-enabled/preprocess
>> reading pairlist file
>> /etc/freeradius/3.0/mods-config/preprocess/huntgroups
>> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
>> # Instantiating module "files" from file
>> /etc/freeradius/3.0/mods-enabled/files
>> reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
>> reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
>> reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
>> # Instantiating module "eap" from file
>> /etc/freeradius/3.0/mods-enabled/eap
>> # Linked to sub-module rlm_eap_md5
>> # Linked to sub-module rlm_eap_leap
>> # Linked to sub-module rlm_eap_gtc
>> gtc {
>> challenge = "Password: "
>> auth_type = "PAP"
>> }
>> # Linked to sub-module rlm_eap_tls
>> tls {
>> tls = "tls-common"
>> }
>> tls-config tls-common {
>> verify_depth = 0
>> ca_path = "/etc/freeradius/3.0/certs"
>> pem_file_type = yes
>> private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
>> certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
>> ca_file = "/etc/ssl/certs/ca-certificates.crt"
>> private_key_password = <<< secret >>>
>> dh_file = "/etc/freeradius/3.0/certs/dh"
>> fragment_size = 1024
>> include_length = yes
>> auto_chain = yes
>> check_crl = no
>> check_all_crl = no
>> cipher_list = "DEFAULT"
>> cipher_server_preference = no
>> ecdh_curve = "prime256v1"
>> disable_tlsv1 = yes
>> disable_tlsv1_1 = yes
>> tls_max_version = "1.2"
>> tls_min_version = "1.2"
>> cache {
>> enable = no
>> lifetime = 24
>> max_entries = 255
>> }
>> verify {
>> skip_if_ocsp_ok = no
>> }
>> ocsp {
>> enable = no
>> override_cert_url = yes
>> url = "http://127.0.0.1/ocsp/"
>> use_nonce = yes
>> timeout = 0
>> softfail = no
>> }
>> }
>> Please use tls_min_version and tls_max_version instead of disable_tlsv1
>> Please use tls_min_version and tls_max_version instead of disable_tlsv1_2
>> # Linked to sub-module rlm_eap_ttls
>> ttls {
>> tls = "tls-common"
>> default_eap_type = "md5"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = no
>> virtual_server = "inner-tunnel"
>> include_length = yes
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_peap
>> peap {
>> tls = "tls-common"
>> default_eap_type = "mschapv2"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = no
>> proxy_tunneled_request_as_eap = yes
>> virtual_server = "inner-tunnel"
>> soh = no
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_mschapv2
>> mschapv2 {
>> with_ntdomain_hack = no
>> send_error = no
>> }
>> # Instantiating module "linelog" from file
>> /etc/freeradius/3.0/mods-enabled/linelog
>> # Instantiating module "log_accounting" from file
>> /etc/freeradius/3.0/mods-enabled/linelog
>> } # modules
>> radiusd: #### Loading Virtual Servers ####
>> server { # from file /etc/freeradius/3.0/radiusd.conf
>> } # server
>> server inner-tunnel { # from file
>> /etc/freeradius/3.0/sites-enabled/inner-tunnel
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> Ignoring "ldap" (see raddb/mods-available/README.rst)
>> # Loading session {...}
>> # Loading post-proxy {...}
>> # Loading post-auth {...}
>> # Skipping contents of 'if' as it is always 'false' --
>> /etc/freeradius/3.0/sites-enabled/inner-tunnel:336
>> } # server inner-tunnel
>> server default { # from file /etc/freeradius/3.0/sites-enabled/default
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> # Loading preacct {...}
>> # Loading accounting {...}
>> # Loading post-proxy {...}
>> # Loading post-auth {...}
>> } # server default
>> radiusd: #### Opening IP addresses and Ports ####
>> listen {
>> type = "auth"
>> ipaddr = 127.0.0.1
>> port = 18120
>> }
>> listen {
>> type = "auth"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "acct"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "auth"
>> ipv6addr = ::
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "acct"
>> ipv6addr = ::
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> Listening on auth address 127.0.0.1 port 18120 bound to server
>> inner-tunnel
>> Listening on auth address * port 1812 bound to server default
>> Listening on acct address * port 1813 bound to server default
>> Listening on auth address :: port 1812 bound to server default
>> Listening on acct address :: port 1813 bound to server default
>> Listening on proxy address * port 49653
>> Listening on proxy address :: port 34473
>> Ready to process requests
>> ________________________________
>> De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
>> outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
>> g.baronas at gmail.com>
>> Enviado: segunda-feira, 18 de julho de 2022 02:42
>> Para: FreeRadius users mailing list <
>> freeradius-users at lists.freeradius.org>
>> Assunto: Re: IPOE
>>
>> First, let's find out if you can see radio messages on the freeradius
>> server.
>> show the debug output so it's clear where you are.
>>
>> 2022-07-17, sk, 23:43 Alexandro Gonçalves Dos Santos <
>> AlexandroGonSan at outlook.com> rašė:
>>
>> > > Also create default tables, I'm attaching a link
>> > > https://wiki.freeradius.org/config/MySQL-DDL-script
>> >
>> > the tables I have already created, now I need to learn how to make the
>> > registrations in these tables, only I'm not finding how to do?
>> > ________________________________
>> > De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
>> > outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
>> > g.baronas at gmail.com>
>> > Enviado: domingo, 17 de julho de 2022 15:29
>> > Para: FreeRadius users mailing list <
>> freeradius-users at lists.freeradius.org
>> > >
>> > Assunto: Re: IPOE
>> >
>> > Also create default tables, I'm attaching a link
>> > https://wiki.freeradius.org/config/MySQL-DDL-script
>> >
>> > 2022-07-17, sk, 22:27 Giedrius Baronas <g.baronas at gmail.com> rašė:
>> >
>> > > Try to send dhcp discovery to mikrotik, then mikrotik sends radius
>> > message
>> > > to freeradius server. Keep the runs in freeradius debug mode with
>> radiusd
>> > > -X command In this way, you will see the radius in the message and
>> what
>> > > attributes are sent by mikrotik.
>> > >
>> > > 2022-07-17, sk, 18:35 Alexandro Gonçalves Dos Santos <
>> > > AlexandroGonSan at outlook.com> rašė:
>> > >
>> > >> > [admin at mtik1] /radius> print detail
>> > >> > Flags: X - disabled
>> > >> > 0 service=dhcp called-id="" domain="" address=10.10.10.11
>> > >> > secret="passw0rd"
>> > >> > authentication-port=1812 accounting-port=1813 timeout=300ms
>> > >> > accounting-backup=no realm="" src-address=10.10.10.10
>> > protocol=udp
>> > >> > certificate=none
>> > >>
>> > >> > [admin at mtik1] > /ip dhcp-server/print detail
>> > >> > Flags: D - dynamic; X - disabled, I - invalid
>> > >> > 0 name="defconf" interface=bridge lease-time=10m
>> > >> > address-pool=default-dhcp
>> > >> > authoritative=yes use-radius=yes lease-script=""
>> > >>
>> > >> And how authentic these users ipoe by freeradius?
>> > >> ________________________________
>> > >> De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
>> > >> outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
>> > >> g.baronas at gmail.com>
>> > >> Enviado: sábado, 16 de julho de 2022 15:19
>> > >> Para: FreeRadius users mailing list <
>> > >> freeradius-users at lists.freeradius.org>
>> > >> Assunto: Re: IPOE
>> > >>
>> > >> [admin at mtik1] /radius> print detail
>> > >> Flags: X - disabled
>> > >> 0 service=dhcp called-id="" domain="" address=10.10.10.11
>> > >> secret="passw0rd"
>> > >> authentication-port=1812 accounting-port=1813 timeout=300ms
>> > >> accounting-backup=no realm="" src-address=10.10.10.10
>> protocol=udp
>> > >> certificate=none
>> > >>
>> > >> [admin at mtik1] > /ip dhcp-server/print detail
>> > >> Flags: D - dynamic; X - disabled, I - invalid
>> > >> 0 name="defconf" interface=bridge lease-time=10m
>> > >> address-pool=default-dhcp
>> > >> authoritative=yes use-radius=yes lease-script=""
>> > >>
>> > >> 2022-07-16, št, 22:09 Alexandro Gonçalves Dos Santos <
>> > >> AlexandroGonSan at outlook.com> rašė:
>> > >>
>> > >> > > I will try to guess that you are talking about subscriber IPOE on
>> > >> cisco,
>> > >> > nokia or juniper?
>> > >> >
>> > >> > It's mikrotik.
>> > >> >
>> > >> > > Freeradius is an authorization server, it does not contain a
>> > database
>> > >> > service. The database is optionally connected according to wishes
>> and
>> > >> > fantasy.
>> > >> >
>> > >> > Yes, I configured the sql module.
>> > >> > ________________________________
>> > >> > De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
>> > >> > outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
>> > >> > g.baronas at gmail.com>
>> > >> > Enviado: sábado, 16 de julho de 2022 14:57
>> > >> > Para: FreeRadius users mailing list <
>> > >> freeradius-users at lists.freeradius.org
>> > >> > >
>> > >> > Assunto: Re: IPOE
>> > >> >
>> > >> > Hi,
>> > >> >
>> > >> > I will try to guess that you are talking about subscriber IPOE on
>> > cisco,
>> > >> > nokia or juniper?
>> > >> >
>> > >> > Freeradius is an authorization server, it does not contain a
>> database
>> > >> > service. The database is optionally connected according to wishes
>> and
>> > >> > fantasy.
>> > >> >
>> > >> > The Freeradius server receives radius messages, according to which
>> > >> select
>> > >> > is found to find the required record in the database
>> > >> >
>> > >> >
>> > >> > Pagarbiai,
>> > >> > Giedrius
>> > >> > 861569551
>> > >> >
>> > >> > > On 2022-07-16, at 21:17, Alexandro Gonçalves Dos Santos <
>> > >> > AlexandroGonSan at outlook.com> wrote:
>> > >> > >
>> > >> > > How do I register an IPOE user in the freeradius database?
>> > >> > > -
>> > >> > > List info/subscribe/unsubscribe? See
>> > >> > http://www.freeradius.org/list/users.html
>> > >> > -
>> > >> > List info/subscribe/unsubscribe? See
>> > >> > http://www.freeradius.org/list/users.html
>> > >> > -
>> > >> > List info/subscribe/unsubscribe? See
>> > >> > http://www.freeradius.org/list/users.html
>> > >> >
>> > >>
>> > >>
>> > >> --
>> > >> Pagarbiai,
>> > >> Giedrius
>> > >> 861569551
>> > >> -
>> > >> List info/subscribe/unsubscribe? See
>> > >> http://www.freeradius.org/list/users.html
>> > >> -
>> > >> List info/subscribe/unsubscribe? See
>> > >> http://www.freeradius.org/list/users.html
>> > >>
>> > >
>> > >
>> > > --
>> > > Pagarbiai,
>> > > Giedrius
>> > > 861569551
>> > >
>> >
>> >
>> > --
>> > Pagarbiai,
>> > Giedrius
>> > 861569551
>> > -
>> > List info/subscribe/unsubscribe? See
>> > http://www.freeradius.org/list/users.html
>> > -
>> > List info/subscribe/unsubscribe? See
>> > http://www.freeradius.org/list/users.html
>> >
>>
>>
>> --
>> Pagarbiai,
>> Giedrius
>> 861569551
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>> -
>> List info/subscribe/unsubscribe? See
>> http://www.freeradius.org/list/users.html
>>
>
>
> --
> Pagarbiai,
> Giedrius
> 861569551
>
--
Pagarbiai,
Giedrius
861569551
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list