IPOE
Giedrius Baronas
g.baronas at gmail.com
Tue Jul 19 22:06:15 UTC 2022
For now you need it to be open only 1812. I think you need tcpdump -i any
port 1812 on freeradius server
2022-07-20, tr, 00:03 Alexandro Gonçalves Dos Santos <
AlexandroGonSan at outlook.com> rašė:
> > I don't see any radio messages sent from Mikrotik. Check if the udp 1812
> > port is open in the firewall on the freeradius server. It also happened
> to
> > me that packets did not arrive until I specified the src ip in the
> mikrotik
> > radius section.
>
> I'm checking for udp port 1812 to be open, udp ports 1813, 42957 (udp6),
> 18120 (udp), 56344 (udp) also need to be open? i checked that the
> freeradius listen these ports.
> ________________________________
> De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
> outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
> g.baronas at gmail.com>
> Enviado: terça-feira, 19 de julho de 2022 12:20
> Para: FreeRadius users mailing list <freeradius-users at lists.freeradius.org
> >
> Assunto: Re: IPOE
>
> I tried to send a radio message from Mikrotik.
>
> (1) User-Name = "16:81:09:E4:6E:68"
> (1) NAS-Port-Type = Ethernet
> (1) NAS-Port = 2200961637
> (1) Service-Type = Framed-User
> (1) Calling-Station-Id = "1:16:81:9:e4:6e:68"
> (1) Called-Station-Id = "my_dhcp_server_instance"
> (1) User-Password = ""
> (1) NAS-Identifier = "Audience1"
> (1) NAS-IP-Address = 192.168.222.1
>
>
> 2022-07-19, an, 18:50 Giedrius Baronas <g.baronas at gmail.com> rašė:
>
> > I don't see any radio messages sent from Mikrotik. Check if the udp 1812
> > port is open in the firewall on the freeradius server. It also happened
> > to me that packets did not arrive until I specified the src ip in the
> > mikrotik radius section.
> >
> > 2022-07-19, an, 01:19 Alexandro Gonçalves Dos Santos <
> > AlexandroGonSan at outlook.com> rašė:
> >
> >> > First, let's find out if you can see radio messages on the freeradius
> >> > server.
> >> > show the debug output so it's clear where you are.
> >>
> >> $ sudo freeradius -X
> >> FreeRADIUS Version 3.0.21
> >> Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
> >> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> >> PARTICULAR PURPOSE
> >> You may redistribute copies of FreeRADIUS under the terms of the
> >> GNU General Public License
> >> For more information about these matters, see the file named COPYRIGHT
> >> Starting - reading configuration files ...
> >> including dictionary file /usr/share/freeradius/dictionary
> >> including dictionary file /usr/share/freeradius/dictionary.dhcp
> >> including dictionary file /usr/share/freeradius/dictionary.vqp
> >> including dictionary file /etc/freeradius/3.0/dictionary
> >> including configuration file /etc/freeradius/3.0/radiusd.conf
> >> including configuration file /etc/freeradius/3.0/proxy.conf
> >> including configuration file /etc/freeradius/3.0/clients.conf
> >> including files in directory /etc/freeradius/3.0/mods-enabled/
> >> including configuration file /etc/freeradius/3.0/mods-enabled/unix
> >> including configuration file /etc/freeradius/3.0/mods-enabled/always
> >> including configuration file /etc/freeradius/3.0/mods-enabled/logintime
> >> including configuration file
> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> including configuration file /etc/freeradius/3.0/mods-enabled/radutmp
> >> including configuration file /etc/freeradius/3.0/mods-enabled/expr
> >> including configuration file /etc/freeradius/3.0/mods-enabled/detail
> >> including configuration file /etc/freeradius/3.0/mods-enabled/sql
> >> including configuration file
> >> /etc/freeradius/3.0/mods-config/sql/main/mysql/queries.conf
> >> including configuration file /etc/freeradius/3.0/mods-enabled/replicate
> >> including configuration file /etc/freeradius/3.0/mods-enabled/sqlippool
> >> including configuration file
> >> /etc/freeradius/3.0/mods-config/sql/ippool/mysql/queries.conf
> >> including configuration file /etc/freeradius/3.0/mods-enabled/sradutmp
> >> including configuration file /etc/freeradius/3.0/mods-enabled/realm
> >> including configuration file /etc/freeradius/3.0/mods-enabled/ntlm_auth
> >> including configuration file /etc/freeradius/3.0/mods-enabled/soh
> >> including configuration file /etc/freeradius/3.0/mods-enabled/digest
> >> including configuration file /etc/freeradius/3.0/mods-enabled/cache_eap
> >> including configuration file /etc/freeradius/3.0/mods-enabled/detail.log
> >> including configuration file /etc/freeradius/3.0/mods-enabled/unpack
> >> including configuration file /etc/freeradius/3.0/mods-enabled/exec
> >> including configuration file /etc/freeradius/3.0/mods-enabled/pap
> >> including configuration file /etc/freeradius/3.0/mods-enabled/expiration
> >> including configuration file /etc/freeradius/3.0/mods-enabled/utf8
> >> including configuration file /etc/freeradius/3.0/mods-enabled/passwd
> >> including configuration file /etc/freeradius/3.0/mods-enabled/mschap
> >> including configuration file /etc/freeradius/3.0/mods-enabled/preprocess
> >> including configuration file /etc/freeradius/3.0/mods-enabled/files
> >> including configuration file /etc/freeradius/3.0/mods-enabled/echo
> >> including configuration file /etc/freeradius/3.0/mods-enabled/eap
> >> including configuration file /etc/freeradius/3.0/mods-enabled/chap
> >> including configuration file /etc/freeradius/3.0/mods-enabled/linelog
> >> including configuration file
> >> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> >> including files in directory /etc/freeradius/3.0/policy.d/
> >> including configuration file
> /etc/freeradius/3.0/policy.d/canonicalization
> >> including configuration file /etc/freeradius/3.0/policy.d/accounting
> >> including configuration file /etc/freeradius/3.0/policy.d/abfab-tr
> >> including configuration file /etc/freeradius/3.0/policy.d/dhcp
> >> including configuration file /etc/freeradius/3.0/policy.d/filter
> >> including configuration file
> >> /etc/freeradius/3.0/policy.d/moonshot-targeted-ids
> >> including configuration file /etc/freeradius/3.0/policy.d/cui
> >> including configuration file /etc/freeradius/3.0/policy.d/operator-name
> >> including configuration file /etc/freeradius/3.0/policy.d/debug
> >> including configuration file /etc/freeradius/3.0/policy.d/control
> >> including configuration file /etc/freeradius/3.0/policy.d/eap
> >> including configuration file /etc/freeradius/3.0/policy.d/rfc7542
> >> including files in directory /etc/freeradius/3.0/sites-enabled/
> >> including configuration file
> >> /etc/freeradius/3.0/sites-enabled/inner-tunnel
> >> including configuration file /etc/freeradius/3.0/sites-enabled/default
> >> main {
> >> security {
> >> user = "freerad"
> >> group = "freerad"
> >> allow_core_dumps = no
> >> }
> >> name = "freeradius"
> >> prefix = "/usr"
> >> localstatedir = "/var"
> >> logdir = "/var/log/freeradius"
> >> run_dir = "/var/run/freeradius"
> >> }
> >> main {
> >> name = "freeradius"
> >> prefix = "/usr"
> >> localstatedir = "/var"
> >> sbindir = "/usr/sbin"
> >> logdir = "/var/log/freeradius"
> >> run_dir = "/var/run/freeradius"
> >> libdir = "/usr/lib/freeradius"
> >> radacctdir = "/var/log/freeradius/radacct"
> >> hostname_lookups = no
> >> max_request_time = 30
> >> cleanup_delay = 5
> >> max_requests = 256000
> >> pidfile = "/var/run/freeradius/freeradius.pid"
> >> checkrad = "/usr/sbin/checkrad"
> >> debug_level = 0
> >> proxy_requests = yes
> >> log {
> >> stripped_names = no
> >> auth = no
> >> auth_badpass = no
> >> auth_goodpass = no
> >> colourise = yes
> >> msg_denied = "You are already logged in - access denied"
> >> }
> >> resources {
> >> }
> >> security {
> >> max_attributes = 200
> >> reject_delay = 1.000000
> >> status_server = yes
> >> }
> >> }
> >> radiusd: #### Loading Realms and Home Servers ####
> >> proxy server {
> >> retry_delay = 5
> >> retry_count = 3
> >> default_fallback = no
> >> dead_time = 120
> >> wake_all_if_all_dead = no
> >> }
> >> home_server localhost {
> >> ipaddr = 127.0.0.1
> >> port = 1812
> >> type = "auth"
> >> secret = <<< secret >>>
> >> response_window = 20.000000
> >> response_timeouts = 1
> >> max_outstanding = 65536
> >> zombie_period = 40
> >> status_check = "status-server"
> >> ping_interval = 30
> >> check_interval = 30
> >> check_timeout = 4
> >> num_answers_to_alive = 3
> >> revive_interval = 120
> >> limit {
> >> max_connections = 16
> >> max_requests = 0
> >> lifetime = 0
> >> idle_timeout = 0
> >> }
> >> coa {
> >> irt = 2
> >> mrt = 16
> >> mrc = 5
> >> mrd = 30
> >> }
> >> }
> >> home_server_pool my_auth_failover {
> >> type = fail-over
> >> home_server = localhost
> >> }
> >> realm example.com {
> >> auth_pool = my_auth_failover
> >> }
> >> realm LOCAL {
> >> }
> >> radiusd: #### Loading Clients ####
> >> client localhost {
> >> ipaddr = 127.0.0.1
> >> require_message_authenticator = no
> >> secret = <<< secret >>>
> >> nas_type = "other"
> >> proto = "*"
> >> limit {
> >> max_connections = 16
> >> lifetime = 0
> >> idle_timeout = 30
> >> }
> >> }
> >> client localhost_ipv6 {
> >> ipv6addr = ::1
> >> require_message_authenticator = no
> >> secret = <<< secret >>>
> >> limit {
> >> max_connections = 16
> >> lifetime = 0
> >> idle_timeout = 30
> >> }
> >> }
> >> Debugger not attached
> >> systemd watchdog is disabled
> >> # Creating Auth-Type = mschap
> >> # Creating Auth-Type = eap
> >> # Creating Auth-Type = PAP
> >> # Creating Auth-Type = CHAP
> >> # Creating Auth-Type = MS-CHAP
> >> # Creating Auth-Type = digest
> >> radiusd: #### Instantiating modules ####
> >> modules {
> >> # Loaded module rlm_unix
> >> # Loading module "unix" from file
> /etc/freeradius/3.0/mods-enabled/unix
> >> unix {
> >> radwtmp = "/var/log/freeradius/radwtmp"
> >> }
> >> Creating attribute Unix-Group
> >> # Loaded module rlm_always
> >> # Loading module "reject" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> always reject {
> >> rcode = "reject"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loading module "fail" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> always fail {
> >> rcode = "fail"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loading module "ok" from file
> /etc/freeradius/3.0/mods-enabled/always
> >> always ok {
> >> rcode = "ok"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loading module "handled" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> always handled {
> >> rcode = "handled"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loading module "invalid" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> always invalid {
> >> rcode = "invalid"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loading module "userlock" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> always userlock {
> >> rcode = "userlock"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loading module "notfound" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> always notfound {
> >> rcode = "notfound"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loading module "noop" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> always noop {
> >> rcode = "noop"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loading module "updated" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> always updated {
> >> rcode = "updated"
> >> simulcount = 0
> >> mpp = no
> >> }
> >> # Loaded module rlm_logintime
> >> # Loading module "logintime" from file
> >> /etc/freeradius/3.0/mods-enabled/logintime
> >> logintime {
> >> minimum_timeout = 60
> >> }
> >> # Loaded module rlm_attr_filter
> >> # Loading module "attr_filter.post-proxy" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> attr_filter attr_filter.post-proxy {
> >> filename = "/etc/freeradius/3.0/mods-config/attr_filter/post-proxy"
> >> key = "%{Realm}"
> >> relaxed = no
> >> }
> >> # Loading module "attr_filter.pre-proxy" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> attr_filter attr_filter.pre-proxy {
> >> filename = "/etc/freeradius/3.0/mods-config/attr_filter/pre-proxy"
> >> key = "%{Realm}"
> >> relaxed = no
> >> }
> >> # Loading module "attr_filter.access_reject" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> attr_filter attr_filter.access_reject {
> >> filename = "/etc/freeradius/3.0/mods-config/attr_filter/access_reject"
> >> key = "%{User-Name}"
> >> relaxed = no
> >> }
> >> # Loading module "attr_filter.access_challenge" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> attr_filter attr_filter.access_challenge {
> >> filename =
> >> "/etc/freeradius/3.0/mods-config/attr_filter/access_challenge"
> >> key = "%{User-Name}"
> >> relaxed = no
> >> }
> >> # Loading module "attr_filter.accounting_response" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> attr_filter attr_filter.accounting_response {
> >> filename =
> >> "/etc/freeradius/3.0/mods-config/attr_filter/accounting_response"
> >> key = "%{User-Name}"
> >> relaxed = no
> >> }
> >> # Loaded module rlm_radutmp
> >> # Loading module "radutmp" from file
> >> /etc/freeradius/3.0/mods-enabled/radutmp
> >> radutmp {
> >> filename = "/var/log/freeradius/radutmp"
> >> username = "%{User-Name}"
> >> case_sensitive = yes
> >> check_with_nas = yes
> >> permissions = 384
> >> caller_id = yes
> >> }
> >> # Loaded module rlm_expr
> >> # Loading module "expr" from file
> /etc/freeradius/3.0/mods-enabled/expr
> >> expr {
> >> safe_characters =
> >> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> >> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> >> }
> >> # Loaded module rlm_detail
> >> # Loading module "detail" from file
> >> /etc/freeradius/3.0/mods-enabled/detail
> >> detail {
> >> filename =
> >>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> >> header = "%t"
> >> permissions = 384
> >> locking = no
> >> escape_filenames = no
> >> log_packet_header = no
> >> }
> >> # Loaded module rlm_sql
> >> # Loading module "sql" from file /etc/freeradius/3.0/mods-enabled/sql
> >> sql {
> >> driver = "rlm_sql_mysql"
> >> server = "localhost"
> >> port = 3306
> >> login = "radius"
> >> password = <<< secret >>>
> >> radius_db = "radius"
> >> read_groups = yes
> >> read_profiles = yes
> >> read_clients = yes
> >> delete_stale_sessions = yes
> >> sql_user_name = "%{User-Name}"
> >> default_user_profile = ""
> >> client_query = "SELECT id, nasname, shortname, type, secret, server
> >> FROM nas"
> >> authorize_check_query = "SELECT id, username, attribute, value, op
> FROM
> >> radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
> >> authorize_reply_query = "SELECT id, username, attribute, value, op
> FROM
> >> radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
> >> authorize_group_check_query = "SELECT id, groupname, attribute, Value,
> >> op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY id"
> >> authorize_group_reply_query = "SELECT id, groupname, attribute, value,
> >> op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY id"
> >> group_membership_query = "SELECT groupname FROM radusergroup WHERE
> >> username = '%{SQL-User-Name}' ORDER BY priority"
> >> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username =
> >> '%{SQL-User-Name}' AND acctstoptime IS NULL"
> >> simul_verify_query = "SELECT radacctid, acctsessionid, username,
> >> nasipaddress, nasportid, framedipaddress, callingstationid,
> framedprotocol
> >> FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS
> NULL"
> >> safe_characters =
> >> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
> >> auto_escape = no
> >> accounting {
> >> reference =
> >>
> "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
> >> type {
> >> accounting-on {
> >> query = "UPDATE radacct SET acctstoptime =
> >> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> >> '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
> >> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> >> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> >> acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
> >> }
> >> accounting-off {
> >> query = "UPDATE radacct SET acctstoptime =
> >> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> >> '%{%{integer:Event-Timestamp}:-%l}' - UNIX_TIMESTAMP(acctstarttime),
> >> acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
> >> acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND
> >> acctstarttime <= FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l})"
> >> }
> >> start {
> >> query = "INSERT INTO radacct (acctsessionid, acctuniqueid,
> username,
> >> realm, nasipaddress, nasportid, nasporttype, acctstarttime,
> acctupdatetime,
> >> acctstoptime, acctsessiontime, acctauthentic, connectinfo_start,
> >> connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid,
> >> callingstationid, acctterminatecause, servicetype, framedprotocol,
> >> framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid,
> >> delegatedipv6prefix) VALUES ('%{Acct-Session-Id}',
> >> '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
> >> '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
> '%{NAS-Port-Type}',
> >> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}),
> >> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), NULL, '0',
> >> '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
> >> '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}',
> >> '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}',
> >> '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}',
> >> '%{Delegated-IPv6-Prefix}')"
> >> }
> >> interim-update {
> >> query = "UPDATE radacct SET acctupdatetime =
> >> (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
> >> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctinterval =
> >> %{%{integer:Event-Timestamp}:-%l} - UNIX_TIMESTAMP(@acctupdatetime_old),
> >> framedipaddress = '%{Framed-IP-Address}', framedipv6address =
> >> '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}',
> >> framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix =
> >> '%{Delegated-IPv6-Prefix}', acctsessiontime =
> >> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> >> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> >> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> >> '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
> >> '%{Acct-Unique-Session-Id}'"
> >> }
> >> stop {
> >> query = "UPDATE radacct SET acctstoptime =
> >> FROM_UNIXTIME(%{%{integer:Event-Timestamp}:-%l}), acctsessiontime =
> >> %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
> >> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
> >> acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
> >> '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
> >> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
> >> AcctUniqueId = '%{Acct-Unique-Session-Id}'"
> >> }
> >> }
> >> }
> >> post-auth {
> >> reference = ".query"
> >> query = "INSERT INTO radpostauth (username, pass, reply, authdate)
> >> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
> >> '%{reply:Packet-Type}', '%S.%M')"
> >> }
> >> }
> >> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
> >> linked
> >> Creating attribute SQL-Group
> >> # Loaded module rlm_replicate
> >> # Loading module "replicate" from file
> >> /etc/freeradius/3.0/mods-enabled/replicate
> >> # Loaded module rlm_sqlippool
> >> # Loading module "sqlippool" from file
> >> /etc/freeradius/3.0/mods-enabled/sqlippool
> >> sqlippool {
> >> sql_module_instance = "sql"
> >> lease_duration = 3600
> >> pool_name = "Pool-Name"
> >> default_pool = "main_pool"
> >> attribute_name = "Framed-IP-Address"
> >> allocate_begin = "START TRANSACTION"
> >> allocate_clear = "UPDATE radippool SET nasipaddress = '', pool_key =
> 0,
> >> callingstationid = '', username = '', expiry_time = NULL WHERE
> expiry_time
> >> <= NOW() - INTERVAL 1 SECOND AND nasipaddress =
> >> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
> >> allocate_clear_timeout = 1
> >> allocate_find = "SELECT framedipaddress FROM radippool WHERE pool_name
> >> = '%{control:Pool-Name}' AND ( expiry_time < NOW() OR expiry_time IS
> NULL
> >> OR expiry_time = 0 OR ( nasipaddress = '%{NAS-IP-Address}' AND pool_key
> =
> >> '%{NAS-Port}' ) ) ORDER BY (username <> '%{User-Name}'),
> (callingstationid
> >> <> '%{Calling-Station-Id}'), expiry_time LIMIT 1 FOR UPDATE"
> >> allocate_update = "UPDATE radippool SET nasipaddress =
> >> '%{NAS-IP-Address}', pool_key = '%{NAS-Port}', callingstationid =
> >> '%{Calling-Station-Id}', username = '%{User-Name}', expiry_time = NOW()
> +
> >> INTERVAL 3600 SECOND WHERE framedipaddress = '%I'"
> >> allocate_commit = "COMMIT"
> >> pool_check = "SELECT id FROM radippool WHERE
> >> pool_name='%{control:Pool-Name}' LIMIT 1"
> >> start_begin = "START TRANSACTION"
> >> start_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL
> >> 3600 SECOND WHERE nasipaddress = '%{NAS-IP-Address}' AND pool_key =
> >> '%{NAS-Port}' AND username = '%{User-Name}' AND callingstationid =
> >> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> >> start_commit = "COMMIT"
> >> alive_begin = "START TRANSACTION"
> >> alive_update = "UPDATE radippool SET expiry_time = NOW() + INTERVAL
> >> 3600 SECOND WHERE nasipaddress =
> >> '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key = '%{NAS-Port}'
> >> AND username = '%{User-Name}' AND callingstationid =
> >> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> >> alive_commit = "COMMIT"
> >> stop_begin = "START TRANSACTION"
> >> stop_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
> >> callingstationid = '', username = '', expiry_time = NULL WHERE
> nasipaddress
> >> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}' AND pool_key =
> '%{NAS-Port}'
> >> AND username = '%{User-Name}' AND callingstationid =
> >> '%{Calling-Station-Id}' AND framedipaddress = '%{Framed-IP-Address}'"
> >> stop_commit = "COMMIT"
> >> on_begin = "START TRANSACTION"
> >> on_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
> >> callingstationid = '', username = '', expiry_time = NULL WHERE
> nasipaddress
> >> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
> >> on_commit = "COMMIT"
> >> off_begin = "START TRANSACTION"
> >> off_clear = "UPDATE radippool SET nasipaddress = '', pool_key = 0,
> >> callingstationid = '', username = '', expiry_time = NULL WHERE
> nasipaddress
> >> = '%{%{Nas-IP-Address}:-%{Nas-IPv6-Address}}'"
> >> off_commit = "COMMIT"
> >> messages {
> >> exists = "Existing IP: %{reply:Framed-IP-Address} (did
> >> %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
> >> %{User-Name})"
> >> success = "Allocated IP: %{reply:Framed-IP-Address} from
> >> %{control:Pool-Name} (did %{Called-Station-Id} cli %{Calling-Station-Id}
> >> port %{NAS-Port} user %{User-Name})"
> >> clear = "Released IP Framed-IP-Address (did %{Called-Station-Id} cli
> >> %{Calling-Station-Id} user %{User-Name})"
> >> failed = "IP Allocation FAILED from %{control:Pool-Name} (did
> >> %{Called-Station-Id} cli %{Calling-Station-Id} port %{NAS-Port} user
> >> %{User-Name})"
> >> nopool = "No Pool-Name defined (did %{Called-Station-Id} cli
> >> %{Calling-Station-Id} port %{NAS-Port} user %{User-Name})"
> >> }
> >> }
> >> # Loading module "sradutmp" from file
> >> /etc/freeradius/3.0/mods-enabled/sradutmp
> >> radutmp sradutmp {
> >> filename = "/var/log/freeradius/sradutmp"
> >> username = "%{User-Name}"
> >> case_sensitive = yes
> >> check_with_nas = yes
> >> permissions = 420
> >> caller_id = no
> >> }
> >> # Loaded module rlm_realm
> >> # Loading module "IPASS" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> realm IPASS {
> >> format = "prefix"
> >> delimiter = "/"
> >> ignore_default = no
> >> ignore_null = no
> >> }
> >> # Loading module "suffix" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> realm suffix {
> >> format = "suffix"
> >> delimiter = "@"
> >> ignore_default = no
> >> ignore_null = no
> >> }
> >> # Loading module "bangpath" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> realm bangpath {
> >> format = "prefix"
> >> delimiter = "!"
> >> ignore_default = no
> >> ignore_null = no
> >> }
> >> # Loading module "realmpercent" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> realm realmpercent {
> >> format = "suffix"
> >> delimiter = "%"
> >> ignore_default = no
> >> ignore_null = no
> >> }
> >> # Loading module "ntdomain" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> realm ntdomain {
> >> format = "prefix"
> >> delimiter = "\\"
> >> ignore_default = no
> >> ignore_null = no
> >> }
> >> # Loaded module rlm_exec
> >> # Loading module "ntlm_auth" from file
> >> /etc/freeradius/3.0/mods-enabled/ntlm_auth
> >> exec ntlm_auth {
> >> wait = yes
> >> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
> >> --username=%{mschap:User-Name} --password=%{User-Password}"
> >> shell_escape = yes
> >> }
> >> # Loaded module rlm_soh
> >> # Loading module "soh" from file /etc/freeradius/3.0/mods-enabled/soh
> >> soh {
> >> dhcp = yes
> >> }
> >> # Loaded module rlm_digest
> >> # Loading module "digest" from file
> >> /etc/freeradius/3.0/mods-enabled/digest
> >> # Loaded module rlm_cache
> >> # Loading module "cache_eap" from file
> >> /etc/freeradius/3.0/mods-enabled/cache_eap
> >> cache cache_eap {
> >> driver = "rlm_cache_rbtree"
> >> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
> >> ttl = 15
> >> max_entries = 0
> >> epoch = 0
> >> add_stats = no
> >> }
> >> # Loading module "auth_log" from file
> >> /etc/freeradius/3.0/mods-enabled/detail.log
> >> detail auth_log {
> >> filename =
> >>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> >> header = "%t"
> >> permissions = 384
> >> locking = no
> >> escape_filenames = no
> >> log_packet_header = no
> >> }
> >> # Loading module "reply_log" from file
> >> /etc/freeradius/3.0/mods-enabled/detail.log
> >> detail reply_log {
> >> filename =
> >>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> >> header = "%t"
> >> permissions = 384
> >> locking = no
> >> escape_filenames = no
> >> log_packet_header = no
> >> }
> >> # Loading module "pre_proxy_log" from file
> >> /etc/freeradius/3.0/mods-enabled/detail.log
> >> detail pre_proxy_log {
> >> filename =
> >>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> >> header = "%t"
> >> permissions = 384
> >> locking = no
> >> escape_filenames = no
> >> log_packet_header = no
> >> }
> >> # Loading module "post_proxy_log" from file
> >> /etc/freeradius/3.0/mods-enabled/detail.log
> >> detail post_proxy_log {
> >> filename =
> >>
> "/var/log/freeradius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> >> header = "%t"
> >> permissions = 384
> >> locking = no
> >> escape_filenames = no
> >> log_packet_header = no
> >> }
> >> # Loaded module rlm_unpack
> >> # Loading module "unpack" from file
> >> /etc/freeradius/3.0/mods-enabled/unpack
> >> # Loading module "exec" from file
> /etc/freeradius/3.0/mods-enabled/exec
> >> exec {
> >> wait = no
> >> input_pairs = "request"
> >> shell_escape = yes
> >> timeout = 10
> >> }
> >> # Loaded module rlm_pap
> >> # Loading module "pap" from file /etc/freeradius/3.0/mods-enabled/pap
> >> pap {
> >> normalise = yes
> >> }
> >> # Loaded module rlm_expiration
> >> # Loading module "expiration" from file
> >> /etc/freeradius/3.0/mods-enabled/expiration
> >> # Loaded module rlm_utf8
> >> # Loading module "utf8" from file
> /etc/freeradius/3.0/mods-enabled/utf8
> >> # Loaded module rlm_passwd
> >> # Loading module "etc_passwd" from file
> >> /etc/freeradius/3.0/mods-enabled/passwd
> >> passwd etc_passwd {
> >> filename = "/etc/passwd"
> >> format = "*User-Name:Crypt-Password:"
> >> delimiter = ":"
> >> ignore_nislike = no
> >> ignore_empty = yes
> >> allow_multiple_keys = no
> >> hash_size = 100
> >> }
> >> # Loaded module rlm_mschap
> >> # Loading module "mschap" from file
> >> /etc/freeradius/3.0/mods-enabled/mschap
> >> mschap {
> >> use_mppe = yes
> >> require_encryption = no
> >> require_strong = no
> >> with_ntdomain_hack = yes
> >> passchange {
> >> }
> >> allow_retry = yes
> >> winbind_retry_with_normalised_username = no
> >> }
> >> # Loaded module rlm_preprocess
> >> # Loading module "preprocess" from file
> >> /etc/freeradius/3.0/mods-enabled/preprocess
> >> preprocess {
> >> huntgroups = "/etc/freeradius/3.0/mods-config/preprocess/huntgroups"
> >> hints = "/etc/freeradius/3.0/mods-config/preprocess/hints"
> >> with_ascend_hack = no
> >> ascend_channels_per_line = 23
> >> with_ntdomain_hack = no
> >> with_specialix_jetstream_hack = no
> >> with_cisco_vsa_hack = no
> >> with_alvarion_vsa_hack = no
> >> }
> >> # Loaded module rlm_files
> >> # Loading module "files" from file
> >> /etc/freeradius/3.0/mods-enabled/files
> >> files {
> >> filename = "/etc/freeradius/3.0/mods-config/files/authorize"
> >> acctusersfile = "/etc/freeradius/3.0/mods-config/files/accounting"
> >> preproxy_usersfile = "/etc/freeradius/3.0/mods-config/files/pre-proxy"
> >> }
> >> # Loading module "echo" from file
> /etc/freeradius/3.0/mods-enabled/echo
> >> exec echo {
> >> wait = yes
> >> program = "/bin/echo %{User-Name}"
> >> input_pairs = "request"
> >> output_pairs = "reply"
> >> shell_escape = yes
> >> }
> >> # Loaded module rlm_eap
> >> # Loading module "eap" from file /etc/freeradius/3.0/mods-enabled/eap
> >> eap {
> >> default_eap_type = "md5"
> >> timer_expire = 60
> >> ignore_unknown_eap_types = no
> >> cisco_accounting_username_bug = no
> >> max_sessions = 256000
> >> }
> >> # Loaded module rlm_chap
> >> # Loading module "chap" from file
> /etc/freeradius/3.0/mods-enabled/chap
> >> # Loaded module rlm_linelog
> >> # Loading module "linelog" from file
> >> /etc/freeradius/3.0/mods-enabled/linelog
> >> linelog {
> >> filename = "/var/log/freeradius/linelog"
> >> escape_filenames = no
> >> syslog_severity = "info"
> >> permissions = 384
> >> format = "This is a log message for %{User-Name}"
> >> reference = "messages.%{%{reply:Packet-Type}:-default}"
> >> }
> >> # Loading module "log_accounting" from file
> >> /etc/freeradius/3.0/mods-enabled/linelog
> >> linelog log_accounting {
> >> filename = "/var/log/freeradius/linelog-accounting"
> >> escape_filenames = no
> >> syslog_severity = "info"
> >> permissions = 384
> >> format = ""
> >> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> >> }
> >> # Loaded module rlm_dynamic_clients
> >> # Loading module "dynamic_clients" from file
> >> /etc/freeradius/3.0/mods-enabled/dynamic_clients
> >> instantiate {
> >> }
> >> # Instantiating module "reject" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "fail" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "ok" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "handled" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "invalid" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "userlock" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "notfound" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "noop" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "updated" from file
> >> /etc/freeradius/3.0/mods-enabled/always
> >> # Instantiating module "logintime" from file
> >> /etc/freeradius/3.0/mods-enabled/logintime
> >> # Instantiating module "attr_filter.post-proxy" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> reading pairlist file
> >> /etc/freeradius/3.0/mods-config/attr_filter/post-proxy
> >> # Instantiating module "attr_filter.pre-proxy" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> reading pairlist file
> >> /etc/freeradius/3.0/mods-config/attr_filter/pre-proxy
> >> # Instantiating module "attr_filter.access_reject" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> reading pairlist file
> >> /etc/freeradius/3.0/mods-config/attr_filter/access_reject
> >> # Instantiating module "attr_filter.access_challenge" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> reading pairlist file
> >> /etc/freeradius/3.0/mods-config/attr_filter/access_challenge
> >> # Instantiating module "attr_filter.accounting_response" from file
> >> /etc/freeradius/3.0/mods-enabled/attr_filter
> >> reading pairlist file
> >> /etc/freeradius/3.0/mods-config/attr_filter/accounting_response
> >> # Instantiating module "detail" from file
> >> /etc/freeradius/3.0/mods-enabled/detail
> >> # Instantiating module "sql" from file
> >> /etc/freeradius/3.0/mods-enabled/sql
> >> rlm_sql_mysql: libmysql version: 10.5.15
> >> mysql {
> >> tls {
> >> tls_required = no
> >> check_cert = no
> >> check_cert_cn = no
> >> }
> >> warnings = "auto"
> >> }
> >> rlm_sql (sql): Attempting to connect to database "radius"
> >> rlm_sql (sql): Initialising connection pool
> >> pool {
> >> start = 5
> >> min = 3
> >> max = 32
> >> spare = 10
> >> uses = 0
> >> lifetime = 0
> >> cleanup_interval = 30
> >> idle_timeout = 60
> >> retry_delay = 30
> >> spread = no
> >> }
> >> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
> >> used
> >> rlm_sql_mysql: Starting connect to MySQL server
> >> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> >> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> >> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
> >> used
> >> rlm_sql_mysql: Starting connect to MySQL server
> >> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> >> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> >> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
> >> used
> >> rlm_sql_mysql: Starting connect to MySQL server
> >> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> >> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> >> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
> >> used
> >> rlm_sql_mysql: Starting connect to MySQL server
> >> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> >> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> >> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
> >> used
> >> rlm_sql_mysql: Starting connect to MySQL server
> >> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> >> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> >> rlm_sql (sql): Processing generate_sql_clients
> >> rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname,
> >> shortname, type, secret, server FROM nas
> >> rlm_sql (sql): Reserved connection (0)
> >> rlm_sql (sql): Executing select query: SELECT id, nasname, shortname,
> >> type, secret, server FROM nas
> >> rlm_sql (sql): Adding client 10.10.254.1 (Mikrotik) to global clients
> list
> >> rlm_sql (10.10.254.1): Client "Mikrotik" (sql) added
> >> rlm_sql (sql): Released connection (0)
> >> Need 5 more connections to reach 10 spares
> >> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
> >> used
> >> rlm_sql_mysql: Starting connect to MySQL server
> >> rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
> >> socket, server version 10.5.15-MariaDB-0+deb11u1, protocol version 10
> >> # Instantiating module "sqlippool" from file
> >> /etc/freeradius/3.0/mods-enabled/sqlippool
> >> Ignoring "allocate_clear_timeout = 1", forcing to
> "allocate_clear_timeout
> >> = 1"
> >> # Instantiating module "IPASS" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> # Instantiating module "suffix" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> # Instantiating module "bangpath" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> # Instantiating module "realmpercent" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> # Instantiating module "ntdomain" from file
> >> /etc/freeradius/3.0/mods-enabled/realm
> >> # Instantiating module "cache_eap" from file
> >> /etc/freeradius/3.0/mods-enabled/cache_eap
> >> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
> >> loaded and linked
> >> # Instantiating module "auth_log" from file
> >> /etc/freeradius/3.0/mods-enabled/detail.log
> >> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> >> detail output
> >> # Instantiating module "reply_log" from file
> >> /etc/freeradius/3.0/mods-enabled/detail.log
> >> # Instantiating module "pre_proxy_log" from file
> >> /etc/freeradius/3.0/mods-enabled/detail.log
> >> # Instantiating module "post_proxy_log" from file
> >> /etc/freeradius/3.0/mods-enabled/detail.log
> >> # Instantiating module "pap" from file
> >> /etc/freeradius/3.0/mods-enabled/pap
> >> # Instantiating module "expiration" from file
> >> /etc/freeradius/3.0/mods-enabled/expiration
> >> # Instantiating module "etc_passwd" from file
> >> /etc/freeradius/3.0/mods-enabled/passwd
> >> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> >> # Instantiating module "mschap" from file
> >> /etc/freeradius/3.0/mods-enabled/mschap
> >> rlm_mschap (mschap): using internal authentication
> >> # Instantiating module "preprocess" from file
> >> /etc/freeradius/3.0/mods-enabled/preprocess
> >> reading pairlist file
> >> /etc/freeradius/3.0/mods-config/preprocess/huntgroups
> >> reading pairlist file /etc/freeradius/3.0/mods-config/preprocess/hints
> >> # Instantiating module "files" from file
> >> /etc/freeradius/3.0/mods-enabled/files
> >> reading pairlist file /etc/freeradius/3.0/mods-config/files/authorize
> >> reading pairlist file /etc/freeradius/3.0/mods-config/files/accounting
> >> reading pairlist file /etc/freeradius/3.0/mods-config/files/pre-proxy
> >> # Instantiating module "eap" from file
> >> /etc/freeradius/3.0/mods-enabled/eap
> >> # Linked to sub-module rlm_eap_md5
> >> # Linked to sub-module rlm_eap_leap
> >> # Linked to sub-module rlm_eap_gtc
> >> gtc {
> >> challenge = "Password: "
> >> auth_type = "PAP"
> >> }
> >> # Linked to sub-module rlm_eap_tls
> >> tls {
> >> tls = "tls-common"
> >> }
> >> tls-config tls-common {
> >> verify_depth = 0
> >> ca_path = "/etc/freeradius/3.0/certs"
> >> pem_file_type = yes
> >> private_key_file = "/etc/ssl/private/ssl-cert-snakeoil.key"
> >> certificate_file = "/etc/ssl/certs/ssl-cert-snakeoil.pem"
> >> ca_file = "/etc/ssl/certs/ca-certificates.crt"
> >> private_key_password = <<< secret >>>
> >> dh_file = "/etc/freeradius/3.0/certs/dh"
> >> fragment_size = 1024
> >> include_length = yes
> >> auto_chain = yes
> >> check_crl = no
> >> check_all_crl = no
> >> cipher_list = "DEFAULT"
> >> cipher_server_preference = no
> >> ecdh_curve = "prime256v1"
> >> disable_tlsv1 = yes
> >> disable_tlsv1_1 = yes
> >> tls_max_version = "1.2"
> >> tls_min_version = "1.2"
> >> cache {
> >> enable = no
> >> lifetime = 24
> >> max_entries = 255
> >> }
> >> verify {
> >> skip_if_ocsp_ok = no
> >> }
> >> ocsp {
> >> enable = no
> >> override_cert_url = yes
> >> url = "http://127.0.0.1/ocsp/"
> >> use_nonce = yes
> >> timeout = 0
> >> softfail = no
> >> }
> >> }
> >> Please use tls_min_version and tls_max_version instead of disable_tlsv1
> >> Please use tls_min_version and tls_max_version instead of
> disable_tlsv1_2
> >> # Linked to sub-module rlm_eap_ttls
> >> ttls {
> >> tls = "tls-common"
> >> default_eap_type = "md5"
> >> copy_request_to_tunnel = no
> >> use_tunneled_reply = no
> >> virtual_server = "inner-tunnel"
> >> include_length = yes
> >> require_client_cert = no
> >> }
> >> tls: Using cached TLS configuration from previous invocation
> >> # Linked to sub-module rlm_eap_peap
> >> peap {
> >> tls = "tls-common"
> >> default_eap_type = "mschapv2"
> >> copy_request_to_tunnel = no
> >> use_tunneled_reply = no
> >> proxy_tunneled_request_as_eap = yes
> >> virtual_server = "inner-tunnel"
> >> soh = no
> >> require_client_cert = no
> >> }
> >> tls: Using cached TLS configuration from previous invocation
> >> # Linked to sub-module rlm_eap_mschapv2
> >> mschapv2 {
> >> with_ntdomain_hack = no
> >> send_error = no
> >> }
> >> # Instantiating module "linelog" from file
> >> /etc/freeradius/3.0/mods-enabled/linelog
> >> # Instantiating module "log_accounting" from file
> >> /etc/freeradius/3.0/mods-enabled/linelog
> >> } # modules
> >> radiusd: #### Loading Virtual Servers ####
> >> server { # from file /etc/freeradius/3.0/radiusd.conf
> >> } # server
> >> server inner-tunnel { # from file
> >> /etc/freeradius/3.0/sites-enabled/inner-tunnel
> >> # Loading authenticate {...}
> >> # Loading authorize {...}
> >> Ignoring "ldap" (see raddb/mods-available/README.rst)
> >> # Loading session {...}
> >> # Loading post-proxy {...}
> >> # Loading post-auth {...}
> >> # Skipping contents of 'if' as it is always 'false' --
> >> /etc/freeradius/3.0/sites-enabled/inner-tunnel:336
> >> } # server inner-tunnel
> >> server default { # from file /etc/freeradius/3.0/sites-enabled/default
> >> # Loading authenticate {...}
> >> # Loading authorize {...}
> >> # Loading preacct {...}
> >> # Loading accounting {...}
> >> # Loading post-proxy {...}
> >> # Loading post-auth {...}
> >> } # server default
> >> radiusd: #### Opening IP addresses and Ports ####
> >> listen {
> >> type = "auth"
> >> ipaddr = 127.0.0.1
> >> port = 18120
> >> }
> >> listen {
> >> type = "auth"
> >> ipaddr = *
> >> port = 0
> >> limit {
> >> max_connections = 16
> >> lifetime = 0
> >> idle_timeout = 30
> >> }
> >> }
> >> listen {
> >> type = "acct"
> >> ipaddr = *
> >> port = 0
> >> limit {
> >> max_connections = 16
> >> lifetime = 0
> >> idle_timeout = 30
> >> }
> >> }
> >> listen {
> >> type = "auth"
> >> ipv6addr = ::
> >> port = 0
> >> limit {
> >> max_connections = 16
> >> lifetime = 0
> >> idle_timeout = 30
> >> }
> >> }
> >> listen {
> >> type = "acct"
> >> ipv6addr = ::
> >> port = 0
> >> limit {
> >> max_connections = 16
> >> lifetime = 0
> >> idle_timeout = 30
> >> }
> >> }
> >> Listening on auth address 127.0.0.1 port 18120 bound to server
> >> inner-tunnel
> >> Listening on auth address * port 1812 bound to server default
> >> Listening on acct address * port 1813 bound to server default
> >> Listening on auth address :: port 1812 bound to server default
> >> Listening on acct address :: port 1813 bound to server default
> >> Listening on proxy address * port 49653
> >> Listening on proxy address :: port 34473
> >> Ready to process requests
> >> ________________________________
> >> De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
> >> outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
> >> g.baronas at gmail.com>
> >> Enviado: segunda-feira, 18 de julho de 2022 02:42
> >> Para: FreeRadius users mailing list <
> >> freeradius-users at lists.freeradius.org>
> >> Assunto: Re: IPOE
> >>
> >> First, let's find out if you can see radio messages on the freeradius
> >> server.
> >> show the debug output so it's clear where you are.
> >>
> >> 2022-07-17, sk, 23:43 Alexandro Gonçalves Dos Santos <
> >> AlexandroGonSan at outlook.com> rašė:
> >>
> >> > > Also create default tables, I'm attaching a link
> >> > > https://wiki.freeradius.org/config/MySQL-DDL-script
> >> >
> >> > the tables I have already created, now I need to learn how to make the
> >> > registrations in these tables, only I'm not finding how to do?
> >> > ________________________________
> >> > De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
> >> > outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
> >> > g.baronas at gmail.com>
> >> > Enviado: domingo, 17 de julho de 2022 15:29
> >> > Para: FreeRadius users mailing list <
> >> freeradius-users at lists.freeradius.org
> >> > >
> >> > Assunto: Re: IPOE
> >> >
> >> > Also create default tables, I'm attaching a link
> >> > https://wiki.freeradius.org/config/MySQL-DDL-script
> >> >
> >> > 2022-07-17, sk, 22:27 Giedrius Baronas <g.baronas at gmail.com> rašė:
> >> >
> >> > > Try to send dhcp discovery to mikrotik, then mikrotik sends radius
> >> > message
> >> > > to freeradius server. Keep the runs in freeradius debug mode with
> >> radiusd
> >> > > -X command In this way, you will see the radius in the message and
> >> what
> >> > > attributes are sent by mikrotik.
> >> > >
> >> > > 2022-07-17, sk, 18:35 Alexandro Gonçalves Dos Santos <
> >> > > AlexandroGonSan at outlook.com> rašė:
> >> > >
> >> > >> > [admin at mtik1] /radius> print detail
> >> > >> > Flags: X - disabled
> >> > >> > 0 service=dhcp called-id="" domain="" address=10.10.10.11
> >> > >> > secret="passw0rd"
> >> > >> > authentication-port=1812 accounting-port=1813 timeout=300ms
> >> > >> > accounting-backup=no realm="" src-address=10.10.10.10
> >> > protocol=udp
> >> > >> > certificate=none
> >> > >>
> >> > >> > [admin at mtik1] > /ip dhcp-server/print detail
> >> > >> > Flags: D - dynamic; X - disabled, I - invalid
> >> > >> > 0 name="defconf" interface=bridge lease-time=10m
> >> > >> > address-pool=default-dhcp
> >> > >> > authoritative=yes use-radius=yes lease-script=""
> >> > >>
> >> > >> And how authentic these users ipoe by freeradius?
> >> > >> ________________________________
> >> > >> De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
> >> > >> outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
> >> > >> g.baronas at gmail.com>
> >> > >> Enviado: sábado, 16 de julho de 2022 15:19
> >> > >> Para: FreeRadius users mailing list <
> >> > >> freeradius-users at lists.freeradius.org>
> >> > >> Assunto: Re: IPOE
> >> > >>
> >> > >> [admin at mtik1] /radius> print detail
> >> > >> Flags: X - disabled
> >> > >> 0 service=dhcp called-id="" domain="" address=10.10.10.11
> >> > >> secret="passw0rd"
> >> > >> authentication-port=1812 accounting-port=1813 timeout=300ms
> >> > >> accounting-backup=no realm="" src-address=10.10.10.10
> >> protocol=udp
> >> > >> certificate=none
> >> > >>
> >> > >> [admin at mtik1] > /ip dhcp-server/print detail
> >> > >> Flags: D - dynamic; X - disabled, I - invalid
> >> > >> 0 name="defconf" interface=bridge lease-time=10m
> >> > >> address-pool=default-dhcp
> >> > >> authoritative=yes use-radius=yes lease-script=""
> >> > >>
> >> > >> 2022-07-16, št, 22:09 Alexandro Gonçalves Dos Santos <
> >> > >> AlexandroGonSan at outlook.com> rašė:
> >> > >>
> >> > >> > > I will try to guess that you are talking about subscriber IPOE
> on
> >> > >> cisco,
> >> > >> > nokia or juniper?
> >> > >> >
> >> > >> > It's mikrotik.
> >> > >> >
> >> > >> > > Freeradius is an authorization server, it does not contain a
> >> > database
> >> > >> > service. The database is optionally connected according to wishes
> >> and
> >> > >> > fantasy.
> >> > >> >
> >> > >> > Yes, I configured the sql module.
> >> > >> > ________________________________
> >> > >> > De: Freeradius-Users <freeradius-users-bounces+alexandrogonsan=
> >> > >> > outlook.com at lists.freeradius.org> em nome de Giedrius Baronas <
> >> > >> > g.baronas at gmail.com>
> >> > >> > Enviado: sábado, 16 de julho de 2022 14:57
> >> > >> > Para: FreeRadius users mailing list <
> >> > >> freeradius-users at lists.freeradius.org
> >> > >> > >
> >> > >> > Assunto: Re: IPOE
> >> > >> >
> >> > >> > Hi,
> >> > >> >
> >> > >> > I will try to guess that you are talking about subscriber IPOE on
> >> > cisco,
> >> > >> > nokia or juniper?
> >> > >> >
> >> > >> > Freeradius is an authorization server, it does not contain a
> >> database
> >> > >> > service. The database is optionally connected according to wishes
> >> and
> >> > >> > fantasy.
> >> > >> >
> >> > >> > The Freeradius server receives radius messages, according to
> which
> >> > >> select
> >> > >> > is found to find the required record in the database
> >> > >> >
> >> > >> >
> >> > >> > Pagarbiai,
> >> > >> > Giedrius
> >> > >> > 861569551
> >> > >> >
> >> > >> > > On 2022-07-16, at 21:17, Alexandro Gonçalves Dos Santos <
> >> > >> > AlexandroGonSan at outlook.com> wrote:
> >> > >> > >
> >> > >> > > How do I register an IPOE user in the freeradius database?
> >> > >> > > -
> >> > >> > > List info/subscribe/unsubscribe? See
> >> > >> > http://www.freeradius.org/list/users.html
> >> > >> > -
> >> > >> > List info/subscribe/unsubscribe? See
> >> > >> > http://www.freeradius.org/list/users.html
> >> > >> > -
> >> > >> > List info/subscribe/unsubscribe? See
> >> > >> > http://www.freeradius.org/list/users.html
> >> > >> >
> >> > >>
> >> > >>
> >> > >> --
> >> > >> Pagarbiai,
> >> > >> Giedrius
> >> > >> 861569551
> >> > >> -
> >> > >> List info/subscribe/unsubscribe? See
> >> > >> http://www.freeradius.org/list/users.html
> >> > >> -
> >> > >> List info/subscribe/unsubscribe? See
> >> > >> http://www.freeradius.org/list/users.html
> >> > >>
> >> > >
> >> > >
> >> > > --
> >> > > Pagarbiai,
> >> > > Giedrius
> >> > > 861569551
> >> > >
> >> >
> >> >
> >> > --
> >> > Pagarbiai,
> >> > Giedrius
> >> > 861569551
> >> > -
> >> > List info/subscribe/unsubscribe? See
> >> > http://www.freeradius.org/list/users.html
> >> > -
> >> > List info/subscribe/unsubscribe? See
> >> > http://www.freeradius.org/list/users.html
> >> >
> >>
> >>
> >> --
> >> Pagarbiai,
> >> Giedrius
> >> 861569551
> >> -
> >> List info/subscribe/unsubscribe? See
> >> http://www.freeradius.org/list/users.html
> >> -
> >> List info/subscribe/unsubscribe? See
> >> http://www.freeradius.org/list/users.html
> >>
> >
> >
> > --
> > Pagarbiai,
> > Giedrius
> > 861569551
> >
>
>
> --
> Pagarbiai,
> Giedrius
> 861569551
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
--
Pagarbiai,
Giedrius
861569551
More information about the Freeradius-Users
mailing list