Vlan Assignement depending on Ip source adress

[Kristofer Hallin]

> On 10 Mar 2022, at 09:39, Benoit RAYNIER <benoit.raynier at flex-o.fr> wrote:
> 
> 
> 
> Thanks for your help,
> 
> in which file should I use this code ?
> 

Most likely you want to edit sites-enabled/default (which points to sites-available/default).

> 
> Benoit RAYNIER
> 
> 
> -----Message d'origine-----
> De : Freeradius-Users <freeradius-users-bounces+benoit.raynier=flex-o.fr at lists.freeradius.org> De la part de Alan DeKok
> Envoyé : mercredi 9 mars 2022 20:51
> À : FreeRadius users mailing list <freeradius-users at lists.freeradius.org>
> Objet : Re: Vlan Assignement depending on Ip source adress
> 
> On Mar 9, 2022, at 8:01 AM, Benoit RAYNIER <benoit.raynier at flex-o.fr> wrote:
>> I have configured a freeradius V3 with automatic VLAN assignement, all work fine.
> 
>  That's good.
> 
>> 
>> I want to know how it is possible to assign a VLAN depending on the IP source Adress.
>> 
>> For Exemple :
>> 
>> If user A connect freeradius from 18.18.18.18 (public ip) ==> Assign 
>> VLAN 1 If user A connect freeradius from 22.22.22.22 (public ip) ==> 
>> Assign VLAN 3 If user A connect freeradius from 34.34.32.12 (public 
>> ip) ==> Assign VLAN 22
> 
>  Use the "switch" statement:
> 
> 	switch "%(Packet-Src-IP-Address}"  {
> 		case 18.18.18.18 {
> 			... assign VLAN1
> 		}
> 
> 		... other case ...
> 
> 		case {
> 			.... doesn't match anything else.
> 		}
> 
> 	}
> 
>  Alan DeKok.
> 
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html