I encountered the problem that there is an account in the database, but the authentication process feedback does not exist. Please help.
娶你苟命
qunigouming at gmail.com
Mon Dec 18 10:25:48 UTC 2023
*Supplement radiusd -X information:*
(1) Received Access-Request Id 97 from 172.16.1.1:38272 to 10.51.154.75:1812
length 215
(1) User-Name = "testuser"
(1) NAS-Identifier = "V16-37U-S6812"
(1) Acct-Session-Id = "0000000106252334030000000108000019932"
(1) User-Password = "testpass"
(1) Calling-Station-Id = "192.168.1.1"
(1) NAS-Port-Type = Virtual
(1) H3C-NAS-Port-Name = "M-GigabitEthernet0/0/0"
(1) Framed-IP-Address = 192.168.1.1
(1) Service-Type = Login-User
(1) NAS-IP-Address = 172.16.1.1
(1) H3C-Product-ID = "H3C S6812-48X6C"
(1) H3C-NAS-Startup-Timestamp = 1609459214
(1) # Executing section authorize from file
/usr/local/etc/raddb/sites-enabled/default
(1) authorize {
(1) policy filter_username {
(1) if (&User-Name) {
(1) if (&User-Name) -> TRUE
(1) if (&User-Name) {
(1) if (&User-Name =~ / /) {
(1) if (&User-Name =~ / /) -> FALSE
(1) if (&User-Name =~ /@[^@]*@/ ) {
(1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
(1) if (&User-Name =~ /\.\./ ) {
(1) if (&User-Name =~ /\.\./ ) -> FALSE
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
(1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) ->
FALSE
(1) if (&User-Name =~ /\.$/) {
(1) if (&User-Name =~ /\.$/) -> FALSE
(1) if (&User-Name =~ /@\./) {
(1) if (&User-Name =~ /@\./) -> FALSE
(1) } # if (&User-Name) = notfound
(1) } # policy filter_username = notfound
(1) [preprocess] = ok
(1) [chap] = noop
(1) [mschap] = noop
(1) [digest] = noop
(1) suffix: Checking for suffix after "@"
(1) suffix: No '@' in User-Name = "testuser", looking up realm NULL
(1) suffix: No such realm "NULL"
(1) [suffix] = noop
(1) eap: No EAP-Message, not doing EAP
(1) [eap] = noop
(1) files: users: Matched entry testuser at line 191
(1) [files] = ok
(1) sql: EXPAND %{User-Name}
(1) sql: --> testuser
(1) sql: SQL-User-Name set to 'testuser'
rlm_sql (sql): Reserved connection (2)
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radcheck
WHERE username = 'testuser' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radcheck WHERE username = 'testuser' ORDER BY id
(1) sql: User found in radcheck table
(1) sql: Conditional check items matched, merging assignment check items
(1) sql: Cleartext-Password := "testpass"
(1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
WHERE username = '%{SQL-User-Name}' ORDER BY id
(1) sql: --> SELECT id, username, attribute, value, op FROM radreply
WHERE username = 'testuser' ORDER BY id
(1) sql: Executing select query: SELECT id, username, attribute, value, op
FROM radreply WHERE username = 'testuser' ORDER BY id
(1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
'%{SQL-User-Name}' ORDER BY priority
(1) sql: --> SELECT groupname FROM radusergroup WHERE username =
'testuser' ORDER BY priority
(1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
username = 'testuser' ORDER BY priority
(1) sql: User not found in any groups
rlm_sql (sql): Released connection (2)
Need more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
socket, server version 11.2.2-MariaDB-log, protocol version 10
rlm_sql (sql): Closing expired connection (5) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing expired connection (4) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing expired connection (3) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): Closing expired connection (1) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
rlm_sql (sql): You probably need to lower "min"
rlm_sql (sql): Closing expired connection (0) - Hit idle_timeout limit
rlm_sql_mysql: Socket destructor called, closing socket
(1) [sql] = ok
(1) [expiration] = noop
(1) [logintime] = noop
(1) [pap] = updated
(1) } # authorize = updated
(1) Found Auth-Type = PAP
(1) # Executing group from file /usr/local/etc/raddb/sites-enabled/default
(1) Auth-Type PAP {
(1) pap: Login attempt with password
(1) pap: Comparing with "known good" Cleartext-Password
(1) pap: User authenticated successfully
(1) [pap] = ok
(1) } # Auth-Type PAP = ok
(1) # Executing section post-auth from file
/usr/local/etc/raddb/sites-enabled/default
(1) post-auth {
(1) if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) {
(1) if (session-state:User-Name && reply:User-Name && request:User-Name
&& (reply:User-Name == request:User-Name)) -> FALSE
(1) update {
(1) No attributes updated for RHS &session-state:
(1) } # update = noop
(1) sql: EXPAND .query
(1) sql: --> .query
(1) sql: Using query template 'query'
rlm_sql (sql): Reserved connection (2)
(1) sql: EXPAND %{User-Name}
(1) sql: --> testuser
(1) sql: SQL-User-Name set to 'testuser'
(1) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S.%M' )
(1) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate )
VALUES ( 'testuser', 'testpass', 'Access-Accept', '2023-12-18
18:21:45.418901' )
(1) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
authdate ) VALUES ( 'testuser', 'testpass', 'Access-Accept', '2023-12-18
18:21:45.418901' )
(1) sql: SQL query returned: success
(1) sql: 1 record(s) updated
rlm_sql (sql): Released connection (2)
(1) [sql] = ok
(1) [exec] = noop
(1) policy remove_reply_message_if_eap {
(1) if (&reply:EAP-Message && &reply:Reply-Message) {
(1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
(1) else {
(1) [noop] = noop
(1) } # else = noop
(1) } # policy remove_reply_message_if_eap = noop
(1) if (EAP-Key-Name && &reply:EAP-Session-Id) {
(1) if (EAP-Key-Name && &reply:EAP-Session-Id) -> FALSE
(1) } # post-auth = ok
(1) Sent Access-Accept Id 97 from 10.51.154.75:1812 to 172.16.1.1:38272
length 32
(1) H3C-Exec-Privilege = Manage
(1) Finished request
Waking up in 4.9 seconds.
(1) Cleaning up request packet ID 97 with timestamp +944 due to
cleanup_delay was reached
Ready to process requests
娶你苟命 <qunigouming at gmail.com> 于2023年12月18日周一 17:54写道:
> Hi,everyone!
> I encountered a new problem: when the freeradius server and the switch
> do not exist in the same subnet, some types of switches respond timed out.
> The following is the switch debug information:
> *Jun 25 22:16:05:497 2021 V16-37U-S6812 RADIUS/7/EVENT: Processing AAA
> request data.
> *Jun 25 22:16:09:024 2021 V16-37U-S6812 RADIUS/7/EVENT: *Response timed
> out.*
> *Jun 25 22:16:09:024 2021 V16-37U-S6812 RADIUS/7/EVENT: Found request
> context, dstIP: 10.1.1.1; dstPort: 1813; VPN instance: Meth; socketfd: 39;
> pktID:200.
> *Jun 25 22:16:09:024 2021 V16-37U-S6812 RADIUS/7/EVENT: Retransmitting
> request packet, currentTries: 2, maxTries: 3.
> *Jun 25 22:16:12:024 2021 V16-37U-S6812 RADIUS/7/EVENT: *Response timed
> out.*
> *Jun 25 22:16:12:024 2021 V16-37U-S6812 RADIUS/7/EVENT: Found request
> context, dstIP: 10.1.1.1; dstPort: 1813; VPN instance: Meth; socketfd: 39;
> pktID:200.
> *Jun 25 22:16:12:024 2021 V16-37U-S6812 RADIUS/7/EVENT: Retransmitting
> request packet, currentTries: 3, maxTries: 3.
> *Jun 25 22:16:15:024 2021 V16-37U-S6812 RADIUS/7/EVENT: *Response timed
> out.*
> *Jun 25 22:16:15:024 2021 V16-37U-S6812 RADIUS/7/EVENT: Found request
> context, dstIP: 10.1.1.1; dstPort: 1813; VPN instance: Meth; socketfd: 39;
> pktID:200.
> *Jun 25 22:16:15:024 2021 V16-37U-S6812 RADIUS/7/EVENT: Reached the
> maximum retries.
> *Jun 25 22:16:15:024 2021 V16-37U-S6812 RADIUS/7/EVENT: Got next server
> failed.
> *Jun 25 22:16:15:024 2021 V16-37U-S6812 RADIUS/7/EVENT: Sent reply error
> message to PAM.
>
> I tried to modify the *response-timeout* of the switch and the
> *idle_timeout* of the freeradius server configuration file, but it had no
> effect.
>
> Ask God for help
>
>
> 娶你苟命 <qunigouming at gmail.com> 于2023年12月6日周三 11:00写道:
>
>> Hi,everyone!
>> * I'm having trouble with freeradius and don't know if I should ask
>> "freeradius-users at lists.freeradius.org
>> <freeradius-users at lists.freeradius.org>"? If this has caused any
>> inconvenience to anyone, please accept my apology and please ignore this
>> email.*
>> * The following is the debugging process tee debugfile I provide for
>> freeradius sever to execute radiusd -X 2>&1 | (this includes valid
>> authentication and invalid authentication processes, I will put them at the
>> end of the email):*
>>
>> FreeRADIUS Version 3.0.13
>> Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
>> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
>> PARTICULAR PURPOSE
>> You may redistribute copies of FreeRADIUS under the terms of the
>> GNU General Public License
>> For more information about these matters, see the file named COPYRIGHT
>> Starting - reading configuration files ...
>> including dictionary file /usr/share/freeradius/dictionary
>> including dictionary file /usr/share/freeradius/dictionary.dhcp
>> including dictionary file /usr/share/freeradius/dictionary.vqp
>> including dictionary file /etc/raddb/dictionary
>> including configuration file /etc/raddb/radiusd.conf
>> including configuration file /etc/raddb/proxy.conf
>> including configuration file /etc/raddb/clients.conf
>> including files in directory /etc/raddb/mods-enabled/
>> including configuration file /etc/raddb/mods-enabled/always
>> including configuration file /etc/raddb/mods-enabled/attr_filter
>> including configuration file /etc/raddb/mods-enabled/cache_eap
>> including configuration file /etc/raddb/mods-enabled/chap
>> including configuration file /etc/raddb/mods-enabled/date
>> including configuration file /etc/raddb/mods-enabled/detail
>> including configuration file /etc/raddb/mods-enabled/detail.log
>> including configuration file /etc/raddb/mods-enabled/dhcp
>> including configuration file /etc/raddb/mods-enabled/digest
>> including configuration file /etc/raddb/mods-enabled/dynamic_clients
>> including configuration file /etc/raddb/mods-enabled/eap
>> including configuration file /etc/raddb/mods-enabled/echo
>> including configuration file /etc/raddb/mods-enabled/exec
>> including configuration file /etc/raddb/mods-enabled/expiration
>> including configuration file /etc/raddb/mods-enabled/expr
>> including configuration file /etc/raddb/mods-enabled/files
>> including configuration file /etc/raddb/mods-enabled/linelog
>> including configuration file /etc/raddb/mods-enabled/logintime
>> including configuration file /etc/raddb/mods-enabled/mschap
>> including configuration file /etc/raddb/mods-enabled/ntlm_auth
>> including configuration file /etc/raddb/mods-enabled/pap
>> including configuration file /etc/raddb/mods-enabled/passwd
>> including configuration file /etc/raddb/mods-enabled/preprocess
>> including configuration file /etc/raddb/mods-enabled/radutmp
>> including configuration file /etc/raddb/mods-enabled/realm
>> including configuration file /etc/raddb/mods-enabled/replicate
>> including configuration file /etc/raddb/mods-enabled/soh
>> including configuration file /etc/raddb/mods-enabled/sradutmp
>> including configuration file /etc/raddb/mods-enabled/unix
>> including configuration file /etc/raddb/mods-enabled/unpack
>> including configuration file /etc/raddb/mods-enabled/utf8
>> including configuration file /etc/raddb/mods-enabled/sql
>> including configuration file
>> /etc/raddb/mods-config/sql/main/mysql/queries.conf
>> including files in directory /etc/raddb/policy.d/
>> including configuration file /etc/raddb/policy.d/accounting
>> including configuration file /etc/raddb/policy.d/canonicalization
>> including configuration file /etc/raddb/policy.d/control
>> including configuration file /etc/raddb/policy.d/cui
>> including configuration file /etc/raddb/policy.d/debug
>> including configuration file /etc/raddb/policy.d/dhcp
>> including configuration file /etc/raddb/policy.d/eap
>> including configuration file /etc/raddb/policy.d/filter
>> including configuration file /etc/raddb/policy.d/operator-name
>> including files in directory /etc/raddb/sites-enabled/
>> including configuration file /etc/raddb/sites-enabled/default
>> including configuration file /etc/raddb/sites-enabled/inner-tunnel
>> main {
>> security {
>> user = "radiusd"
>> group = "radiusd"
>> allow_core_dumps = no
>> }
>> name = "radiusd"
>> prefix = "/usr"
>> localstatedir = "/var"
>> logdir = "/var/log/radius"
>> run_dir = "/var/run/radiusd"
>> }
>> main {
>> name = "radiusd"
>> prefix = "/usr"
>> localstatedir = "/var"
>> sbindir = "/usr/sbin"
>> logdir = "/var/log/radius"
>> run_dir = "/var/run/radiusd"
>> libdir = "/usr/lib64/freeradius"
>> radacctdir = "/var/log/radius/radacct"
>> hostname_lookups = no
>> max_request_time = 30
>> cleanup_delay = 5
>> max_requests = 16384
>> pidfile = "/var/run/radiusd/radiusd.pid"
>> checkrad = "/usr/sbin/checkrad"
>> debug_level = 0
>> proxy_requests = yes
>> log {
>> stripped_names = no
>> auth = no
>> auth_badpass = no
>> auth_goodpass = no
>> colourise = yes
>> msg_denied = "You are already logged in - access denied"
>> }
>> resources {
>> }
>> security {
>> max_attributes = 200
>> reject_delay = 1.000000
>> status_server = yes
>> }
>> }
>> radiusd: #### Loading Realms and Home Servers ####
>> proxy server {
>> retry_delay = 5
>> retry_count = 3
>> default_fallback = no
>> dead_time = 120
>> wake_all_if_all_dead = no
>> }
>> home_server localhost {
>> ipaddr = 127.0.0.1
>> port = 1812
>> type = "auth"
>> secret = <<< secret >>>
>> response_window = 20.000000
>> response_timeouts = 1
>> max_outstanding = 65536
>> zombie_period = 40
>> status_check = "status-server"
>> ping_interval = 30
>> check_interval = 30
>> check_timeout = 4
>> num_answers_to_alive = 3
>> revive_interval = 120
>> limit {
>> max_connections = 16
>> max_requests = 0
>> lifetime = 0
>> idle_timeout = 0
>> }
>> coa {
>> irt = 2
>> mrt = 16
>> mrc = 5
>> mrd = 30
>> }
>> }
>> home_server_pool my_auth_failover {
>> type = fail-over
>> home_server = localhost
>> }
>> realm example.com {
>> auth_pool = my_auth_failover
>> }
>> realm LOCAL {
>> }
>> radiusd: #### Loading Clients ####
>> client all_client {
>> ipaddr = 0.0.0.0/0
>> require_message_authenticator = no
>> secret = <<< secret >>>
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> Debugger not attached
>> # Creating Auth-Type = mschap
>> # Creating Auth-Type = digest
>> # Creating Auth-Type = eap
>> # Creating Auth-Type = PAP
>> # Creating Auth-Type = CHAP
>> # Creating Auth-Type = MS-CHAP
>> radiusd: #### Instantiating modules ####
>> modules {
>> # Loaded module rlm_always
>> # Loading module "reject" from file /etc/raddb/mods-enabled/always
>> always reject {
>> rcode = "reject"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "fail" from file /etc/raddb/mods-enabled/always
>> always fail {
>> rcode = "fail"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "ok" from file /etc/raddb/mods-enabled/always
>> always ok {
>> rcode = "ok"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "handled" from file /etc/raddb/mods-enabled/always
>> always handled {
>> rcode = "handled"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "invalid" from file /etc/raddb/mods-enabled/always
>> always invalid {
>> rcode = "invalid"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "userlock" from file /etc/raddb/mods-enabled/always
>> always userlock {
>> rcode = "userlock"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "notfound" from file /etc/raddb/mods-enabled/always
>> always notfound {
>> rcode = "notfound"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "noop" from file /etc/raddb/mods-enabled/always
>> always noop {
>> rcode = "noop"
>> simulcount = 0
>> mpp = no
>> }
>> # Loading module "updated" from file /etc/raddb/mods-enabled/always
>> always updated {
>> rcode = "updated"
>> simulcount = 0
>> mpp = no
>> }
>> # Loaded module rlm_attr_filter
>> # Loading module "attr_filter.post-proxy" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.post-proxy {
>> filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.pre-proxy" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.pre-proxy {
>> filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
>> key = "%{Realm}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_reject" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.access_reject {
>> filename = "/etc/raddb/mods-config/attr_filter/access_reject"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.access_challenge" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.access_challenge {
>> filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loading module "attr_filter.accounting_response" from file
>> /etc/raddb/mods-enabled/attr_filter
>> attr_filter attr_filter.accounting_response {
>> filename =
>> "/etc/raddb/mods-config/attr_filter/accounting_response"
>> key = "%{User-Name}"
>> relaxed = no
>> }
>> # Loaded module rlm_cache
>> # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
>> cache cache_eap {
>> driver = "rlm_cache_rbtree"
>> key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
>> ttl = 15
>> max_entries = 0
>> epoch = 0
>> add_stats = no
>> }
>> # Loaded module rlm_chap
>> # Loading module "chap" from file /etc/raddb/mods-enabled/chap
>> # Loaded module rlm_date
>> # Loading module "date" from file /etc/raddb/mods-enabled/date
>> date {
>> format = "%b %e %Y %H:%M:%S %Z"
>> }
>> # Loaded module rlm_detail
>> # Loading module "detail" from file /etc/raddb/mods-enabled/detail
>> detail {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
>> detail auth_log {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "reply_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> detail reply_log {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "pre_proxy_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> detail pre_proxy_log {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loading module "post_proxy_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> detail post_proxy_log {
>> filename =
>> "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
>> header = "%t"
>> permissions = 384
>> locking = no
>> escape_filenames = no
>> log_packet_header = no
>> }
>> # Loaded module rlm_dhcp
>> # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
>> # Loaded module rlm_digest
>> # Loading module "digest" from file /etc/raddb/mods-enabled/digest
>> # Loaded module rlm_dynamic_clients
>> # Loading module "dynamic_clients" from file
>> /etc/raddb/mods-enabled/dynamic_clients
>> # Loaded module rlm_eap
>> # Loading module "eap" from file /etc/raddb/mods-enabled/eap
>> eap {
>> default_eap_type = "md5"
>> timer_expire = 60
>> ignore_unknown_eap_types = no
>> cisco_accounting_username_bug = no
>> max_sessions = 16384
>> }
>> # Loaded module rlm_exec
>> # Loading module "echo" from file /etc/raddb/mods-enabled/echo
>> exec echo {
>> wait = yes
>> program = "/bin/echo %{User-Name}"
>> input_pairs = "request"
>> output_pairs = "reply"
>> shell_escape = yes
>> }
>> # Loading module "exec" from file /etc/raddb/mods-enabled/exec
>> exec {
>> wait = no
>> input_pairs = "request"
>> shell_escape = yes
>> timeout = 10
>> }
>> # Loaded module rlm_expiration
>> # Loading module "expiration" from file
>> /etc/raddb/mods-enabled/expiration
>> # Loaded module rlm_expr
>> # Loading module "expr" from file /etc/raddb/mods-enabled/expr
>> expr {
>> safe_characters =
>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
>> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
>> }
>> # Loaded module rlm_files
>> # Loading module "files" from file /etc/raddb/mods-enabled/files
>> files {
>> filename = "/etc/raddb/mods-config/files/authorize"
>> acctusersfile = "/etc/raddb/mods-config/files/accounting"
>> preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
>> }
>> # Loaded module rlm_linelog
>> # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
>> linelog {
>> filename = "/var/log/radius/linelog"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = "This is a log message for %{User-Name}"
>> reference = "messages.%{%{reply:Packet-Type}:-default}"
>> }
>> # Loading module "log_accounting" from file
>> /etc/raddb/mods-enabled/linelog
>> linelog log_accounting {
>> filename = "/var/log/radius/linelog-accounting"
>> escape_filenames = no
>> syslog_severity = "info"
>> permissions = 384
>> format = ""
>> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
>> }
>> # Loaded module rlm_logintime
>> # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
>> logintime {
>> minimum_timeout = 60
>> }
>> # Loaded module rlm_mschap
>> # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
>> mschap {
>> use_mppe = yes
>> require_encryption = no
>> require_strong = no
>> with_ntdomain_hack = yes
>> passchange {
>> }
>> allow_retry = yes
>> winbind_retry_with_normalised_username = no
>> }
>> # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
>> exec ntlm_auth {
>> wait = yes
>> program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
>> --username=%{mschap:User-Name} --password=%{User-Password}"
>> shell_escape = yes
>> }
>> # Loaded module rlm_pap
>> # Loading module "pap" from file /etc/raddb/mods-enabled/pap
>> pap {
>> normalise = yes
>> }
>> # Loaded module rlm_passwd
>> # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
>> passwd etc_passwd {
>> filename = "/etc/passwd"
>> format = "*User-Name:Crypt-Password:"
>> delimiter = ":"
>> ignore_nislike = no
>> ignore_empty = yes
>> allow_multiple_keys = no
>> hash_size = 100
>> }
>> # Loaded module rlm_preprocess
>> # Loading module "preprocess" from file
>> /etc/raddb/mods-enabled/preprocess
>> preprocess {
>> huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
>> hints = "/etc/raddb/mods-config/preprocess/hints"
>> with_ascend_hack = no
>> ascend_channels_per_line = 23
>> with_ntdomain_hack = no
>> with_specialix_jetstream_hack = no
>> with_cisco_vsa_hack = no
>> with_alvarion_vsa_hack = no
>> }
>> # Loaded module rlm_radutmp
>> # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
>> radutmp {
>> filename = "/var/log/radius/radutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 384
>> caller_id = yes
>> }
>> # Loaded module rlm_realm
>> # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
>> realm IPASS {
>> format = "prefix"
>> delimiter = "/"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
>> realm suffix {
>> format = "suffix"
>> delimiter = "@"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
>> realm realmpercent {
>> format = "suffix"
>> delimiter = "%"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
>> realm ntdomain {
>> format = "prefix"
>> delimiter = "\\"
>> ignore_default = no
>> ignore_null = no
>> }
>> # Loaded module rlm_replicate
>> # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
>> # Loaded module rlm_soh
>> # Loading module "soh" from file /etc/raddb/mods-enabled/soh
>> soh {
>> dhcp = yes
>> }
>> # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
>> radutmp sradutmp {
>> filename = "/var/log/radius/sradutmp"
>> username = "%{User-Name}"
>> case_sensitive = yes
>> check_with_nas = yes
>> permissions = 420
>> caller_id = no
>> }
>> # Loaded module rlm_unix
>> # Loading module "unix" from file /etc/raddb/mods-enabled/unix
>> unix {
>> radwtmp = "/var/log/radius/radwtmp"
>> }
>> Creating attribute Unix-Group
>> # Loaded module rlm_unpack
>> # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
>> # Loaded module rlm_utf8
>> # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
>> # Loaded module rlm_sql
>> # Loading module "sql" from file /etc/raddb/mods-enabled/sql
>> sql {
>> driver = "rlm_sql_mysql"
>> server = "localhost"
>> port = 3306
>> login = "dbuser"
>> password = <<< secret >>>
>> radius_db = "radiusdb"
>> read_groups = yes
>> read_profiles = yes
>> read_clients = no
>> delete_stale_sessions = yes
>> sql_user_name = "%{User-Name}"
>> default_user_profile = ""
>> client_query = "SELECT id, nasname, shortname, type, secret,
>> server FROM nas"
>> authorize_check_query = "SELECT id, username, attribute, value,
>> op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
>> authorize_reply_query = "SELECT id, username, attribute, value,
>> op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
>> authorize_group_check_query = "SELECT id, groupname, attribute,
>> Value, op FROM radgroupcheck WHERE groupname = '%{SQL-Group}' ORDER BY i
>> d"
>> authorize_group_reply_query = "SELECT id, groupname, attribute,
>> value, op FROM radgroupreply WHERE groupname = '%{SQL-Group}' ORDER BY i
>> d"
>> group_membership_query = "SELECT groupname FROM radusergroup
>> WHERE username = '%{SQL-User-Name}' ORDER BY priority"
>> simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username
>> = '%{SQL-User-Name}' AND acctstoptime IS NULL"
>> simul_verify_query = "SELECT radacctid, acctsessionid, username,
>> nasipaddress, nasportid, framedipaddress, callingstationid, framedproto
>> col FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS
>> NULL"
>> safe_characters =
>> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
>> accounting {
>> reference = "%{tolower:type.%{Acct-Status-Type}.query}"
>> type {
>> accounting-on {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
>> '%{integer:Event-Timestamp}' -
>> UNIX_TIMESTAMP(acctstarttime), acctterminatecause =
>> '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND
>> nasipaddress = '%
>> {NAS-IP-Address}' AND acctstarttime <=
>> FROM_UNIXTIME(%{integer:Event-Timestamp})"
>> }
>> accounting-off {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
>> '%{integer:Event-Timestamp}' -
>> UNIX_TIMESTAMP(acctstarttime), acctterminatecause =
>> '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND
>> nasipaddress = '%
>> {NAS-IP-Address}' AND acctstarttime <=
>> FROM_UNIXTIME(%{integer:Event-Timestamp})"
>> }
>> start {
>> query = "INSERT INTO radacct (acctsessionid,
>> acctuniqueid, username, realm,
>> nasipaddress,
>> nasportid, nasporttype, acctstarttime,
>> acctupdatetime, acctstoptime, acctsessiontime,
>> acctauthentic, c
>> onnectinfo_start, connectinfo_stop, acctinputoctets,
>> acctoutputoctets, calledstationid, callingstationid,
>> acctterminatec
>> ause, servicetype, framedprotocol, framedipaddress) VALUES
>> ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}',
>> '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
>> '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}),
>> FROM_UNIXTIME(
>> %{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}',
>> '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
>> '%{Calling-Station-Id}', '
>> ', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
>> }
>> interim-update {
>> query = "UPDATE radacct SET acctupdatetime =
>> (@acctupdatetime_old:=acctupdatetime), acctupdatetime =
>> FROM_UNIXTIME(%{integer:Event-Tim
>> estamp}), acctinterval = %{integer:Event-Timestamp} -
>> UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress =
>> '%{Framed-IP-Address}', acctsess
>> iontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets =
>> '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
>> acctoutputoctet
>> s = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
>> '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
>> '%{Acct-Unique-Session-Id}'"
>> }
>> stop {
>> query = "UPDATE radacct SET acctstoptime =
>> FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime =
>> %{%{Acct-Session-Time}
>> :-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 |
>> '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Giga
>> words}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause =
>> '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE Ac
>> ctUniqueId = '%{Acct-Unique-Session-Id}'"
>> }
>> }
>> }
>> post-auth {
>> reference = ".query"
>> query = "INSERT INTO radpostauth (username, pass, reply,
>> authdate) VALUES ( '%{SQL-User-Name}',
>> '%{%{User-Password}:-%{Chap-Password}}',
>> '%{reply:Packet-Type}', '%S')"
>> }
>> }
>> rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
>> linked
>> Creating attribute SQL-Group
>> instantiate {
>> }
>> # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
>> # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
>> # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
>> # Instantiating module "handled" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "invalid" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "userlock" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "notfound" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
>> # Instantiating module "updated" from file
>> /etc/raddb/mods-enabled/always
>> # Instantiating module "attr_filter.post-proxy" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
>> # Instantiating module "attr_filter.pre-proxy" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
>> # Instantiating module "attr_filter.access_reject" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
>> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
>> "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT".
>> [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
>> "FreeRADIUS-Response-Delay-USec" found in filter list for realm
>> "DEFAULT"
>> .
>> # Instantiating module "attr_filter.access_challenge" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
>> # Instantiating module "attr_filter.accounting_response" from file
>> /etc/raddb/mods-enabled/attr_filter
>> reading pairlist file
>> /etc/raddb/mods-config/attr_filter/accounting_response
>> # Instantiating module "cache_eap" from file
>> /etc/raddb/mods-enabled/cache_eap
>> rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree)
>> loaded and linked
>> # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
>> # Instantiating module "auth_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
>> detail output
>> # Instantiating module "reply_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> # Instantiating module "pre_proxy_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> # Instantiating module "post_proxy_log" from file
>> /etc/raddb/mods-enabled/detail.log
>> # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
>> # Linked to sub-module rlm_eap_md5
>> # Linked to sub-module rlm_eap_leap
>> # Linked to sub-module rlm_eap_gtc
>> gtc {
>> challenge = "Password: "
>> auth_type = "PAP"
>> }
>> # Linked to sub-module rlm_eap_tls
>> tls {
>> tls = "tls-common"
>> }
>> tls-config tls-common {
>> verify_depth = 0
>> ca_path = "/etc/raddb/certs"
>> pem_file_type = yes
>> private_key_file = "/etc/raddb/certs/server.pem"
>> certificate_file = "/etc/raddb/certs/server.pem"
>> ca_file = "/etc/raddb/certs/ca.pem"
>> private_key_password = <<< secret >>>
>> dh_file = "/etc/raddb/certs/dh"
>> fragment_size = 1024
>> include_length = yes
>> auto_chain = yes
>> check_crl = no
>> check_all_crl = no
>> cipher_list = "DEFAULT"
>> cipher_server_preference = no
>> ecdh_curve = "prime256v1"
>> cache {
>> enable = no
>> lifetime = 24
>> max_entries = 255
>> }
>> verify {
>> skip_if_ocsp_ok = no
>> }
>> ocsp {
>> enable = no
>> override_cert_url = yes
>> url = "http://127.0.0.1/ocsp/"
>> use_nonce = yes
>> timeout = 0
>> softfail = no
>> }
>> }
>> # Linked to sub-module rlm_eap_ttls
>> ttls {
>> tls = "tls-common"
>> default_eap_type = "md5"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = no
>> virtual_server = "inner-tunnel"
>> include_length = yes
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_peap
>> peap {
>> tls = "tls-common"
>> default_eap_type = "mschapv2"
>> copy_request_to_tunnel = no
>> use_tunneled_reply = no
>> proxy_tunneled_request_as_eap = yes
>> virtual_server = "inner-tunnel"
>> soh = no
>> require_client_cert = no
>> }
>> tls: Using cached TLS configuration from previous invocation
>> # Linked to sub-module rlm_eap_mschapv2
>> mschapv2 {
>> with_ntdomain_hack = no
>> send_error = no
>> }
>> # Instantiating module "expiration" from file
>> /etc/raddb/mods-enabled/expiration
>> # Instantiating module "files" from file /etc/raddb/mods-enabled/files
>> reading pairlist file /etc/raddb/mods-config/files/authorize
>> reading pairlist file /etc/raddb/mods-config/files/accounting
>> reading pairlist file /etc/raddb/mods-config/files/pre-proxy
>> # Instantiating module "linelog" from file
>> /etc/raddb/mods-enabled/linelog
>> # Instantiating module "log_accounting" from file
>> /etc/raddb/mods-enabled/linelog
>> # Instantiating module "logintime" from file
>> /etc/raddb/mods-enabled/logintime
>> # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
>> rlm_mschap (mschap): using internal authentication
>> # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
>> # Instantiating module "etc_passwd" from file
>> /etc/raddb/mods-enabled/passwd
>> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
>> # Instantiating module "preprocess" from file
>> /etc/raddb/mods-enabled/preprocess
>> reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
>> reading pairlist file /etc/raddb/mods-config/preprocess/hints
>> # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
>> # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
>> # Instantiating module "realmpercent" from file
>> /etc/raddb/mods-enabled/realm
>> # Instantiating module "ntdomain" from file
>> /etc/raddb/mods-enabled/realm
>> # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
>> rlm_sql_mysql: libmysql version: 10.1.48-MariaDB
>> mysql {
>> tls {
>> }
>> warnings = "auto"
>> }
>> rlm_sql (sql): Attempting to connect to database "radiusdb"
>> rlm_sql (sql): Initialising connection pool
>> pool {
>> start = 5
>> min = 3
>> max = 32
>> spare = 10
>> uses = 0
>> lifetime = 0
>> cleanup_interval = 30
>> idle_timeout = 60
>> retry_delay = 30
>> spread = no
>> }
>> rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
>> socket, server version 11.2.2-MariaDB-log, protocol version 10
>> rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
>> socket, server version 11.2.2-MariaDB-log, protocol version 10
>> rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
>> socket, server version 11.2.2-MariaDB-log, protocol version 10
>> rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
>> socket, server version 11.2.2-MariaDB-log, protocol version 10
>> rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
>> socket, server version 11.2.2-MariaDB-log, protocol version 10
>> } # modules
>> radiusd: #### Loading Virtual Servers ####
>> server { # from file /etc/raddb/radiusd.conf
>> } # server
>> server default { # from file /etc/raddb/sites-enabled/default
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> Ignoring "ldap" (see raddb/mods-available/README.rst)
>> # Loading preacct {...}
>> # Loading accounting {...}
>> # Loading post-proxy {...}
>> # Loading post-auth {...}
>> } # server default
>> server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
>> # Loading authenticate {...}
>> # Loading authorize {...}
>> # Loading session {...}
>> # Loading post-proxy {...}
>> # Loading post-auth {...}
>> # Skipping contents of 'if' as it is always 'false' --
>> /etc/raddb/sites-enabled/inner-tunnel:330
>> } # server inner-tunnel
>> radiusd: #### Opening IP addresses and Ports ####
>> listen {
>> type = "auth"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "acct"
>> ipaddr = *
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "auth"
>> ipv6addr = ::
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "acct"
>> ipv6addr = ::
>> port = 0
>> limit {
>> max_connections = 16
>> lifetime = 0
>> idle_timeout = 30
>> }
>> }
>> listen {
>> type = "auth"
>> ipaddr = 127.0.0.1
>> port = 18120
>> }
>> Listening on auth address * port 1812 bound to server default
>> Listening on acct address * port 1813 bound to server default
>> Listening on auth address :: port 1812 bound to server default
>> Listening on acct address :: port 1813 bound to server default
>> Listening on auth address 127.0.0.1 port 18120 bound to server
>> inner-tunnel
>> Listening on proxy address * port 34346
>> Listening on proxy address :: port 45544
>> Ready to process requests
>>
>>
>> *The following will be the debugging information of the certification
>> process of the switch:*
>>
>> (0) Received Access-Request Id 228 from 192.168.1.243:38272 to
>> 192.168.2.118:1812 length 215
>> (0) User-Name = "netnoc"
>> (0) NAS-Identifier = "4F-37U-S6812"
>> (0) Acct-Session-Id = "0000000106121519040000000108000026168"
>> (0) User-Password = "123456"
>> (0) Calling-Station-Id = "192.168.2.1"
>> (0) NAS-Port-Type = Virtual
>> (0) Attr-26.25506.230 = 0x4d2d4769676162697445746865726e6574302f302f30
>> (0) Framed-IP-Address = 192.168.2.1
>> (0) Service-Type = Login-User
>> (0) NAS-IP-Address = 192.168.1.243
>> (0) H3C-Product-ID = "H3C S6812-48X6C"
>> (0) H3C-NAS-Startup-Timestamp = 1609459214
>> (0) # Executing section authorize from file
>> /etc/raddb/sites-enabled/default
>> (0) authorize {
>> (0) policy filter_username {
>> (0) if (&User-Name) {
>> (0) if (&User-Name) -> TRUE
>> (0) if (&User-Name) {
>> (0) if (&User-Name =~ / /) {
>> (0) if (&User-Name =~ / /) -> FALSE
>> (0) if (&User-Name =~ /@[^@]*@/ ) {
>> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (0) if (&User-Name =~ /\.\./ ) {
>> (0) if (&User-Name =~ /\.\./ ) -> FALSE
>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (0) if (&User-Name =~ /\.$/) {
>> (0) if (&User-Name =~ /\.$/) -> FALSE
>> (0) if (&User-Name =~ /@\./) {
>> (0) if (&User-Name =~ /@\./) -> FALSE
>> (0) } # if (&User-Name) = notfound
>> (0) } # policy filter_username = notfound
>> (0) [preprocess] = ok
>> (0) [chap] = noop
>> (0) [mschap] = noop
>> (0) [digest] = noop
>> (0) suffix: Checking for suffix after "@"
>> (0) suffix: No '@' in User-Name = "netnoc", looking up realm NULL
>> (0) suffix: No such realm "NULL"
>> (0) [suffix] = noop
>> (0) eap: No EAP-Message, not doing EAP
>> (0) [eap] = noop
>> (0) [files] = noop
>> (0) sql: EXPAND %{User-Name}
>> (0) sql: --> netnoc
>> (0) sql: SQL-User-Name set to 'netnoc'
>> rlm_sql (sql): Reserved connection (0)
>> (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
>> WHERE username = '%{SQL-User-Name}' ORDER BY id
>> (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck
>> WHERE username = 'netnoc' ORDER BY id
>> (0) sql: Executing select query: SELECT id, username, attribute, value,
>> op FROM radcheck WHERE username = 'netnoc' ORDER BY id
>> (0) sql: User found in radcheck table
>> (0) sql: Conditional check items matched, merging assignment check items
>> (0) sql: MD5-Password :=
>> 0x6466346638383237653136313136306566383961303439343861363962323139
>> (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
>> WHERE username = '%{SQL-User-Name}' ORDER BY id
>> (0) sql: --> SELECT id, username, attribute, value, op FROM radreply
>> WHERE username = 'netnoc' ORDER BY id
>> (0) sql: Executing select query: SELECT id, username, attribute, value,
>> op FROM radreply WHERE username = 'netnoc' ORDER BY id
>> (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
>> '%{SQL-User-Name}' ORDER BY priority
>> (0) sql: --> SELECT groupname FROM radusergroup WHERE username =
>> 'netnoc' ORDER BY priority
>> (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
>> username = 'netnoc' ORDER BY priority
>> (0) sql: User not found in any groups
>> rlm_sql (sql): Released connection (0)
>> Need 5 more connections to reach 10 spares
>> rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
>> socket, server version 11.2.2-MariaDB-log, protocol version 10
>> (0) [sql] = ok
>> (0) [expiration] = noop
>> (0) [logintime] = noop
>> (0) pap: Normalizing MD5-Password from hex encoding, 32 bytes -> 16 bytes
>> (0) [pap] = updated
>> (0) } # authorize = updated
>> (0) Found Auth-Type = PAP
>> (0) # Executing group from file /etc/raddb/sites-enabled/default
>> (0) Auth-Type PAP {
>> (0) pap: Login attempt with password
>> (0) pap: Comparing with "known-good" MD5-Password
>> (0) pap: User authenticated successfully
>> (0) [pap] = ok
>> (0) } # Auth-Type PAP = ok
>> (0) # Executing section post-auth from file
>> /etc/raddb/sites-enabled/default
>> (0) post-auth {
>> (0) update {
>> (0) No attributes updated
>> (0) } # update = noop
>> (0) sql: EXPAND .query
>> (0) sql: --> .query
>> (0) sql: Using query template 'query'
>> rlm_sql (sql): Reserved connection (1)
>> (0) sql: EXPAND %{User-Name}
>> (0) sql: --> netnoc
>> (0) sql: SQL-User-Name set to 'netnoc'
>> (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
>> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
>> '%{reply:Packet-Type}', '%S')
>> (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
>> VALUES ( 'netnoc', '123456', 'Access-Accept', '2023-12-05 10:
>> 07:15.051206')
>> (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
>> authdate) VALUES ( 'netnoc', '123456', 'Access-Accept', '2023
>> -12-05 10:07:15.051206')
>> (0) sql: SQL query returned: success
>> (0) sql: 1 record(s) updated
>> rlm_sql (sql): Released connection (1)
>> (0) [sql] = ok
>> (0) [exec] = noop
>> (0) policy remove_reply_message_if_eap {
>> (0) if (&reply:EAP-Message && &reply:Reply-Message) {
>> (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>> (0) else {
>> (0) [noop] = noop
>> (0) } # else = noop
>> (0) } # policy remove_reply_message_if_eap = noop
>> (0) } # post-auth = ok
>> (0) Sent Access-Accept Id 228 from 192.168.2.118:1812 to
>> 192.168.1.243:38272 length 0
>> (0) Finished request
>> Waking up in 4.9 seconds.
>> (0) Cleaning up request packet ID 228 with timestamp +5
>> Ready to process requests
>> (1) Received Access-Request Id 175 from 192.168.1.244:63378 to
>> 192.168.2.118:1812 length 170
>> (1) User-Name = "netnoc"
>> (1) User-Password = "123456"
>> (1) Service-Type = Administrative-User
>> (1) Framed-Protocol = X.75-Synchronous
>> (1) Framed-IP-Address = 192.168.2.1
>> (1) NAS-Identifier = "4F-CE6857-ASW244"
>> (1) NAS-Port-Type = Virtual
>> (1) NAS-IP-Address = 192.168.1.244
>> (1) Huawei-Startup-Stamp = 1701770673
>> (1) Huawei-Version = "Huawei VRP Software Version"
>> (1) Huawei-Product-ID = "VRP"
>> (1) Message-Authenticator = 0x83f55529c0423e10fb1e141aa00a5fff
>> (1) # Executing section authorize from file
>> /etc/raddb/sites-enabled/default
>> (1) authorize {
>> (1) policy filter_username {
>> (1) if (&User-Name) {
>> (1) if (&User-Name) -> TRUE
>> (1) if (&User-Name) {
>> (1) if (&User-Name =~ / /) {
>> (1) if (&User-Name =~ / /) -> FALSE
>> (1) if (&User-Name =~ /@[^@]*@/ ) {
>> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
>> (1) if (&User-Name =~ /\.\./ ) {
>> (1) if (&User-Name =~ /\.\./ ) -> FALSE
>> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
>> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
>> -> FALSE
>> (1) if (&User-Name =~ /\.$/) {
>> (1) if (&User-Name =~ /\.$/) -> FALSE
>> (1) if (&User-Name =~ /@\./) {
>> (1) if (&User-Name =~ /@\./) -> FALSE
>> (1) } # if (&User-Name) = notfound
>> (1) } # policy filter_username = notfound
>> (1) [preprocess] = ok
>> (1) [chap] = noop
>> (1) [mschap] = noop
>> (1) [digest] = noop
>> (1) suffix: Checking for suffix after "@"
>> (1) suffix: No '@' in User-Name = "netnoc", looking up realm NULL
>> (1) suffix: No such realm "NULL"
>> (1) [suffix] = noop
>> (1) eap: No EAP-Message, not doing EAP
>> (1) [eap] = noop
>> (1) [files] = noop
>> (1) sql: EXPAND %{User-Name}
>> (1) sql: --> netnoc
>> (1) sql: SQL-User-Name set to 'netnoc'
>> rlm_sql (sql): Reserved connection (2)
>> (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck
>> WHERE username = '%{SQL-User-Name}' ORDER BY id
>> (1) sql: --> SELECT id, username, attribute, value, op FROM radcheck
>> WHERE username = 'netnoc' ORDER BY id
>> (1) sql: Executing select query: SELECT id, username, attribute, value,
>> op FROM radcheck WHERE username = 'netnoc' ORDER BY id
>> (1) sql: User found in radcheck table
>> (1) sql: Conditional check items matched, merging assignment check items
>> (1) sql: MD5-Password :=
>> 0x6466346638383237653136313136306566383961303439343861363962323139
>> (1) sql: EXPAND SELECT id, username, attribute, value, op FROM radreply
>> WHERE username = '%{SQL-User-Name}' ORDER BY id
>> (1) sql: --> SELECT id, username, attribute, value, op FROM radreply
>> WHERE username = 'netnoc' ORDER BY id
>> (1) sql: Executing select query: SELECT id, username, attribute, value,
>> op FROM radreply WHERE username = 'netnoc' ORDER BY id
>> (1) sql: EXPAND SELECT groupname FROM radusergroup WHERE username =
>> '%{SQL-User-Name}' ORDER BY priority
>> (1) sql: --> SELECT groupname FROM radusergroup WHERE username =
>> 'netnoc' ORDER BY priority
>> (1) sql: Executing select query: SELECT groupname FROM radusergroup WHERE
>> username = 'netnoc' ORDER BY priority
>> (1) sql: User not found in any groups
>> rlm_sql (sql): Released connection (2)
>> Need 4 more connections to reach 10 spares
>> rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots
>> used
>> rlm_sql_mysql: Starting connect to MySQL server
>> rlm_sql_mysql: Connected to database 'radiusdb' on Localhost via UNIX
>> socket, server version 11.2.2-MariaDB-log, protocol version 10
>> (1) [sql] = ok
>> (1) [expiration] = noop
>> (1) [logintime] = noop
>> (1) pap: Normalizing MD5-Password from hex encoding, 32 bytes -> 16 bytes
>> (1) [pap] = updated
>> (1) } # authorize = updated
>> (1) Found Auth-Type = PAP
>> (1) # Executing group from file /etc/raddb/sites-enabled/default
>> (1) Auth-Type PAP {
>> (1) pap: Login attempt with password
>> (1) pap: Comparing with "known-good" MD5-Password
>> (1) pap: User authenticated successfully
>> (1) [pap] = ok
>> (1) } # Auth-Type PAP = ok
>> (1) # Executing section post-auth from file
>> /etc/raddb/sites-enabled/default
>> (1) post-auth {
>> (1) update {
>> (1) No attributes updated
>> (1) } # update = noop
>> (1) sql: EXPAND .query
>> (1) sql: --> .query
>> (1) sql: Using query template 'query'
>> rlm_sql (sql): Reserved connection (3)
>> (1) sql: EXPAND %{User-Name}
>> (1) sql: --> netnoc
>> (1) sql: SQL-User-Name set to 'netnoc'
>> (1) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate)
>> VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}',
>> '%{reply:Packet-Type}', '%S')
>> (1) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate)
>> VALUES ( 'netnoc', '123456', 'Access-Accept', '2023-12-05 10:
>> 07:21.420568')
>> (1) sql: Executing query: INSERT INTO radpostauth (username, pass, reply,
>> authdate) VALUES ( 'netnoc', '123456', 'Access-Accept', '2023
>> -12-05 10:07:21.420568')
>> (1) sql: SQL query returned: success
>> (1) sql: 1 record(s) updated
>> rlm_sql (sql): Released connection (3)
>> (1) [sql] = ok
>> (1) [exec] = noop
>> (1) policy remove_reply_message_if_eap {
>> (1) if (&reply:EAP-Message && &reply:Reply-Message) {
>> (1) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE
>> (1) else {
>> (1) [noop] = noop
>> (1) } # else = noop
>> (1) } # policy remove_reply_message_if_eap = noop
>> (1) } # post-auth = ok
>> (1) Sent Access-Accept Id 175 from 192.168.2.118:1812 to
>> 192.168.1.244:63378 length 0
>> (1) Finished request
>> Waking up in 4.9 seconds
>>
>> *What is puzzling is that the user "netnoc" exists on my mysql, but
>> when using H3C network supplier products, it will prompt that the user does
>> not exist. I have repeatedly confirmed that there is no problem with the
>> switch configuration file. This problem will not exist when testing with
>> Cisco ACS.*
>>
>> *The following is the mysql account information:*
>>
>> MariaDB [radiusdb]> SELECT * FROM radcheck;
>>
>> +----+----------+--------------------+----+----------------------------------+
>> | id | username | attribute | op | value
>> |
>>
>> +----+----------+--------------------+----+----------------------------------+
>> | 1 | netnoc | MD5-Password | := |
>> df4f8827e161sdfg56a04948a69b219 |
>>
>>
>> *The following is my network configuration file using H3C S6812-48X6C. I
>> tried to use both freeradius and system domains but failed, which is very
>> frustrating.*
>>
>> local-user usermgmt
>> service-type ssh terminal
>> authorization-attribute level 3
>> password cipher sjkak25u98sdk
>> quit
>>
>> ssh server enable
>> ssh user usermgmt service-type all authentication-type password
>>
>> dot1x
>> dot1x authentication-method pap
>> domain default enable freeradius(system)
>>
>> radius scheme freeradius
>> primary authentication 192.168.2.118 key simple demo_radius_secret
>> user-name-format without-domain
>> quit
>> radius scheme system
>> user-name-format without-domain
>> quit
>>
>> domain freeradius
>> authentication login radius-scheme freeradius local
>> quit
>> domain system
>> authentication login radius-scheme freeradius local
>> quit
>>
>> user-interface vty 0 4
>> acl 2000 inbound
>> authentication-mode scheme
>> protocol inbound ssh
>>
>> * I don’t know if providing the above information will be helpful or
>> troublesome to you. If so, I'm so sorry! I look forward to having you reply
>> to my email again if I need to provide more information. At the same time,
>> I also look forward to your help me solve this problem! Thanks everyone!*
>>
>>
>> *
>>
>>
>> alex007*
>>
>
More information about the Freeradius-Users
mailing list