debug log

[Ryan McGuire]

Thanks for the reply Jon,

Cam you point me in the direction of a tutorial to set up freeradius from start to finish?

Seems like the ones I've found are missing pieces here and there vs others

Keep in mind I'm completely new to this and the ultimate goal is using the freeradius server to authenticate users for wireless authentication with a mikrotik router which would be our NAS

thanks for any help provided



Sent from my Verizon, Samsung Galaxy smartphone




----------------------------
Ryan McGuire | Systems Administrator
Century Gaming Technologies - Billings
PO Box 21138 Billings, MT 59101
C: 406-860-1299
E: rmcguire at cgtmt.com
W: www.cgtmt.com
Confidentiality Statement:
This e-mail contains confidential information which also may be privileged. Unless you are the addressee (or authorized to receive for the addressee), you may not copy, use, disclose or distribute the e-mail message or any information contained in the message. If you have received this e-mail message in error, please advise the sender by replying to this message or by telephone and then promptly delete it.
----------------------------
-------- Original message --------
From: Jon Gerdes <gerdesj at blueloop.net>
Date: 7/9/24 4:11 PM (GMT-07:00)
To: freeradius-users at lists.freeradius.org
Cc: Ryan McGuire <rmcguire at cgtmt.com>
Subject: Re: debug log

On Tue, 2024-07-09 at 20: 31 +0000, Ryan McGuire via Freeradius-Users wrote: > I have ran through the tutorial of freeradius setup at the following > site and am sharing my debug file as at this point I’m not sure where > I’m supposed


On Tue, 2024-07-09 at 20:31 +0000, Ryan McGuire via Freeradius-Users
wrote:
> I have ran through the tutorial of freeradius setup at the following
> site and am sharing my debug file as at this point I’m not sure where
> I’m supposed to go? We’re trying to setup wireless authentication
> using a mikrotik router as our NAS to authenticate to our radius
> server.
>
>
> https://urldefense.com/v3/__https://docs.beamnetworks.dev/en/linux/networking/freeradius-daloradius__;!!OpwIkcY!lBj7VDRIb1VC2HUzWT_4Y9TAruO96FphdmJVspAJU1tsDNsWSOUhqrtIetl91qmio4NQINhF17e2yRmP$
>
>
> below is my debug log after running

-----------------8<----------------------

Ryan

I'm no expert but Alan and co are probably tied up with BlastRadius.

I can't see an actual authentication attempt in your debug log.  It
would be nice to see how things actually fail 8)  Redact any passwords
or create some simple throwaway ones for the logs.  If you do set a
simple secret etc make sure you set it everywhere it is needed.

There are a few errors in there that are probably cosmetic.  A possible
duplicate definition of your Mikrotik (another one called IT office
Mikrotik)

You might like to try out this sort of testing, with radclient.  Here's
a reasonably well documented effort:

https://urldefense.com/v3/__https://support.secureauth.com/hc/en-us/articles/21005845034772-How-to-test-RADIUS-using-RADCLIENT-on-Linux-WSL__;!!OpwIkcY!lBj7VDRIb1VC2HUzWT_4Y9TAruO96FphdmJVspAJU1tsDNsWSOUhqrtIetl91qmio4NQINhF1_UfLlNV$

What sort of Mikrotik are you using?  They tend to come with the
kitchen sink installed.  Routeros comes with a FreeRADIUS installed.

A few more short notes on what you are trying to achieve and a debug of
what happens when it fails and I'm sure you'll get over the line.

Cheers
Jon