Freeradius to use SQL table instead of client.conf
Alan Smith
asmith7724 at myyahoo.com
Wed Jul 17 06:17:27 UTC 2024
Hi all,
I am a newbie in Freeradius and trying to test the use of SQL server to dynamically update freeradius clients. The setup is using Red Hat 8, freeradius 3.0.20-14 and mariadb. My scenario will need to update the clients without the need to restart radiusd service.Thus I started using SQL DB as the source for freeradius clients.
SQL module is configured to use mysql and other queries are commented in /etc/raddb/mods-config/sql/main/mysql/queries.conf
The commented queries are authorize_check_query, authorize_reply_query, group_membership_query, authorize_group_check_query, authorize_group_reply_query.
As of now, it works as follows. When radiusd is started, it will load the clients from the database table.However, adding/removing of clients in the table will not take affect until the service is restarted again.
Below is the output of radiusd -X. If more information is required, please let me know.
[root at freeradiu2 raddb]# radiusd -X
FreeRADIUS Version 3.0.20
Copyright (C) 1999-2019 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE
You may redistribute copies of FreeRADIUS under the terms of the
GNU General Public License
For more information about these matters, see the file named COPYRIGHT
Starting - reading configuration files ...
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including configuration file /etc/raddb/mods-enabled/sql
including configuration file /etc/raddb/mods-config/sql/main/mysql/queries.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/date
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/perl
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/cui
including configuration file /etc/raddb/policy.d/debug
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/rfc7542
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/mysite
including configuration file /etc/raddb/sites-enabled/control-socket
main {
security {
user = "radiusd"
group = "radiusd"
allow_core_dumps = no
}
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 16384
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
log {
stripped_names = no
auth = no
auth_badpass = no
auth_goodpass = no
colourise = yes
msg_denied = "You are already logged in - access denied"
}
resources {
}
security {
max_attributes = 200
reject_delay = 1.000000
status_server = yes
}
}
radiusd: #### Loading Realms and Home Servers ####
proxy server {
retry_delay = 5
retry_count = 3
default_fallback = no
dead_time = 120
wake_all_if_all_dead = no
}
home_server localhost {
ipaddr = 127.0.0.1
port = 1812
type = "auth"
secret = <<< secret >>>
response_window = 20.000000
response_timeouts = 1
max_outstanding = 65536
zombie_period = 40
status_check = "status-server"
ping_interval = 30
check_interval = 30
check_timeout = 4
num_answers_to_alive = 3
revive_interval = 120
limit {
max_connections = 16
max_requests = 0
lifetime = 0
idle_timeout = 0
}
coa {
irt = 2
mrt = 16
mrc = 5
mrd = 30
}
}
home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
}
realm example.com {
auth_pool = my_auth_failover
}
realm LOCAL {
}
radiusd: #### Loading Clients ####
client localhost {
ipaddr = 127.0.0.1
require_message_authenticator = no
secret = <<< secret >>>
nas_type = "other"
proto = "*"
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
client localhost_ipv6 {
ipv6addr = ::1
require_message_authenticator = no
secret = <<< secret >>>
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Debugger not attached
# Creating Auth-Type = Perl
radiusd: #### Instantiating modules ####
modules {
# Loaded module rlm_sql
# Loading module "sql" from file /etc/raddb/mods-enabled/sql
sql {
driver = "rlm_sql_mysql"
server = "localhost"
port = 3306
login = "freeradadmin17"
password = <<< secret >>>
radius_db = "casdb_tenant1"
read_groups = yes
read_profiles = yes
read_clients = yes
delete_stale_sessions = yes
sql_user_name = "%{User-Name}"
default_user_profile = ""
client_query = "SELECT id, nasname, shortname, type, secret, server FROM radclients"
simul_count_query = "SELECT COUNT(*) FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
simul_verify_query = "SELECT radacctid, acctsessionid, username, nasipaddress, nasportid, framedipaddress, callingstationid, framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
auto_escape = no
accounting {
reference = "%{tolower:type.%{%{Acct-Status-Type}:-%{Request-Processing-Stage}}.query}"
type {
accounting-on {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
accounting-off {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = '%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime), acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE acctstoptime IS NULL AND nasipaddress = '%{NAS-IP-Address}' AND acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
}
start {
query = "INSERT INTO radacct (acctsessionid, acctuniqueid, username, realm, nasipaddress, nasportid, nasporttype, acctstarttime, acctupdatetime, acctstoptime, acctsessiontime, acctauthentic, connectinfo_start, connectinfo_stop, acctinputoctets, acctoutputoctets, calledstationid, callingstationid, acctterminatecause, servicetype, framedprotocol, framedipaddress, framedipv6address, framedipv6prefix, framedinterfaceid, delegatedipv6prefix) VALUES ('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}', '%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}), FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Framed-IPv6-Address}', '%{Framed-IPv6-Prefix}', '%{Framed-Interface-Id}', '%{Delegated-IPv6-Prefix}')"
}
interim-update {
query = "UPDATE radacct SET acctupdatetime = (@acctupdatetime_old:=acctupdatetime), acctupdatetime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval = %{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old), framedipaddress = '%{Framed-IP-Address}', framedipv6address = '%{Framed-IPv6-Address}', framedipv6prefix = '%{Framed-IPv6-Prefix}', framedinterfaceid = '%{Framed-Interface-Id}', delegatedipv6prefix = '%{Delegated-IPv6-Prefix}', acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
stop {
query = "UPDATE radacct SET acctstoptime = FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime = %{%{Acct-Session-Time}:-NULL}, acctinputoctets = '%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}', acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 | '%{%{Acct-Output-Octets}:-0}', acctterminatecause = '%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE AcctUniqueId = '%{Acct-Unique-Session-Id}'"
}
}
}
post-auth {
reference = ".query"
query = "INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S')"
}
}
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
# Loaded module rlm_always
# Loading module "reject" from file /etc/raddb/mods-enabled/always
always reject {
rcode = "reject"
simulcount = 0
mpp = no
}
# Loading module "fail" from file /etc/raddb/mods-enabled/always
always fail {
rcode = "fail"
simulcount = 0
mpp = no
}
# Loading module "ok" from file /etc/raddb/mods-enabled/always
always ok {
rcode = "ok"
simulcount = 0
mpp = no
}
# Loading module "handled" from file /etc/raddb/mods-enabled/always
always handled {
rcode = "handled"
simulcount = 0
mpp = no
}
# Loading module "invalid" from file /etc/raddb/mods-enabled/always
always invalid {
rcode = "invalid"
simulcount = 0
mpp = no
}
# Loading module "userlock" from file /etc/raddb/mods-enabled/always
always userlock {
rcode = "userlock"
simulcount = 0
mpp = no
}
# Loading module "notfound" from file /etc/raddb/mods-enabled/always
always notfound {
rcode = "notfound"
simulcount = 0
mpp = no
}
# Loading module "noop" from file /etc/raddb/mods-enabled/always
always noop {
rcode = "noop"
simulcount = 0
mpp = no
}
# Loading module "updated" from file /etc/raddb/mods-enabled/always
always updated {
rcode = "updated"
simulcount = 0
mpp = no
}
# Loaded module rlm_attr_filter
# Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.post-proxy {
filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.pre-proxy {
filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
key = "%{Realm}"
relaxed = no
}
# Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_reject {
filename = "/etc/raddb/mods-config/attr_filter/access_reject"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.access_challenge {
filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
key = "%{User-Name}"
relaxed = no
}
# Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
attr_filter attr_filter.accounting_response {
filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
key = "%{User-Name}"
relaxed = no
}
# Loaded module rlm_cache
# Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
cache cache_eap {
driver = "rlm_cache_rbtree"
key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
ttl = 15
max_entries = 0
epoch = 0
add_stats = no
}
# Loaded module rlm_chap
# Loading module "chap" from file /etc/raddb/mods-enabled/chap
# Loaded module rlm_date
# Loading module "date" from file /etc/raddb/mods-enabled/date
date {
format = "%b %e %Y %H:%M:%S %Z"
utc = no
}
# Loading module "wispr2date" from file /etc/raddb/mods-enabled/date
date wispr2date {
format = "%Y-%m-%dT%H:%M:%S"
utc = no
}
# Loaded module rlm_detail
# Loading module "detail" from file /etc/raddb/mods-enabled/detail
detail {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log
detail auth_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "reply_log" from file /etc/raddb/mods-enabled/detail.log
detail reply_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail pre_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
detail post_proxy_log {
filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
header = "%t"
permissions = 384
locking = no
escape_filenames = no
log_packet_header = no
}
# Loaded module rlm_digest
# Loading module "digest" from file /etc/raddb/mods-enabled/digest
# Loaded module rlm_dynamic_clients
# Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients
# Loaded module rlm_exec
# Loading module "echo" from file /etc/raddb/mods-enabled/echo
exec echo {
wait = yes
program = "/bin/echo %{User-Name}"
input_pairs = "request"
output_pairs = "reply"
shell_escape = yes
}
# Loading module "exec" from file /etc/raddb/mods-enabled/exec
exec {
wait = no
input_pairs = "request"
shell_escape = yes
timeout = 10
}
# Loaded module rlm_expiration
# Loading module "expiration" from file /etc/raddb/mods-enabled/expiration
# Loaded module rlm_expr
# Loading module "expr" from file /etc/raddb/mods-enabled/expr
expr {
safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
}
# Loaded module rlm_files
# Loading module "files" from file /etc/raddb/mods-enabled/files
files {
filename = "/etc/raddb/mods-config/files/authorize"
acctusersfile = "/etc/raddb/mods-config/files/accounting"
preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
}
# Loaded module rlm_linelog
# Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
linelog {
filename = "syslog"
escape_filenames = no
syslog_facility = "local1"
syslog_severity = "info"
permissions = 384
format = "This is a log message for %{User-Name}"
reference = "messages.%{%{reply:Packet-Type}:-default}"
}
# Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog
linelog log_accounting {
filename = "/var/log/radius/linelog-accounting"
escape_filenames = no
syslog_severity = "info"
permissions = 384
format = ""
reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
}
# Loaded module rlm_logintime
# Loading module "logintime" from file /etc/raddb/mods-enabled/logintime
logintime {
minimum_timeout = 60
}
# Loaded module rlm_mschap
# Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
mschap {
use_mppe = yes
require_encryption = no
require_strong = no
with_ntdomain_hack = yes
passchange {
}
allow_retry = yes
winbind_retry_with_normalised_username = no
}
# Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth
exec ntlm_auth {
wait = yes
program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}"
shell_escape = yes
}
# Loaded module rlm_pap
# Loading module "pap" from file /etc/raddb/mods-enabled/pap
pap {
normalise = yes
}
# Loaded module rlm_passwd
# Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
passwd etc_passwd {
filename = "/etc/passwd"
format = "*User-Name:Crypt-Password:"
delimiter = ":"
ignore_nislike = no
ignore_empty = yes
allow_multiple_keys = no
hash_size = 100
}
# Loaded module rlm_preprocess
# Loading module "preprocess" from file /etc/raddb/mods-enabled/preprocess
preprocess {
huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
hints = "/etc/raddb/mods-config/preprocess/hints"
with_ascend_hack = no
ascend_channels_per_line = 23
with_ntdomain_hack = no
with_specialix_jetstream_hack = no
with_cisco_vsa_hack = no
with_alvarion_vsa_hack = no
}
# Loaded module rlm_radutmp
# Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
radutmp {
filename = "/var/log/radius/radutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 384
caller_id = yes
}
# Loaded module rlm_realm
# Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
realm IPASS {
format = "prefix"
delimiter = "/"
ignore_default = no
ignore_null = no
}
# Loading module "suffix" from file /etc/raddb/mods-enabled/realm
realm suffix {
format = "suffix"
delimiter = "@"
ignore_default = no
ignore_null = no
}
# Loading module "bangpath" from file /etc/raddb/mods-enabled/realm
realm bangpath {
format = "prefix"
delimiter = "!"
ignore_default = no
ignore_null = no
}
# Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm
realm realmpercent {
format = "suffix"
delimiter = "%"
ignore_default = no
ignore_null = no
}
# Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
realm ntdomain {
format = "prefix"
delimiter = "\\"
ignore_default = no
ignore_null = no
}
# Loaded module rlm_replicate
# Loading module "replicate" from file /etc/raddb/mods-enabled/replicate
# Loaded module rlm_soh
# Loading module "soh" from file /etc/raddb/mods-enabled/soh
soh {
dhcp = yes
}
# Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
radutmp sradutmp {
filename = "/var/log/radius/sradutmp"
username = "%{User-Name}"
case_sensitive = yes
check_with_nas = yes
permissions = 420
caller_id = no
}
# Loaded module rlm_unix
# Loading module "unix" from file /etc/raddb/mods-enabled/unix
unix {
radwtmp = "/var/log/radius/radwtmp"
}
Creating attribute Unix-Group
# Loaded module rlm_unpack
# Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
# Loaded module rlm_utf8
# Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
# Loaded module rlm_perl
# Loading module "perl" from file /etc/raddb/mods-enabled/perl
perl {
filename = "/etc/raddb/plugin/agent.pl"
func_authorize = "authorize"
func_authenticate = "authenticate"
func_post_auth = "post_auth"
func_accounting = "accounting"
func_preacct = "preacct"
func_checksimul = "checksimul"
func_detach = "detach"
func_xlat = "xlat"
func_pre_proxy = "pre_proxy"
func_post_proxy = "post_proxy"
func_recv_coa = "recv_coa"
func_send_coa = "send_coa"
perl_flags = "-T"
}
instantiate {
}
# Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 10.5.5
mysql {
tls {
tls_required = no
check_cert = no
check_cert_cn = no
}
warnings = "auto"
}
rlm_sql (sql): Attempting to connect to database "casdb_tenant1"
rlm_sql (sql): Initialising connection pool
pool {
start = 5
min = 3
max = 32
spare = 10
uses = 0
lifetime = 0
cleanup_interval = 30
idle_timeout = 60
retry_delay = 30
spread = no
}
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'casdb_tenant1' on Localhost via UNIX socket, server version 10.3.35-MariaDB, protocol version 10
rlm_sql (sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'casdb_tenant1' on Localhost via UNIX socket, server version 10.3.35-MariaDB, protocol version 10
rlm_sql (sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'casdb_tenant1' on Localhost via UNIX socket, server version 10.3.35-MariaDB, protocol version 10
rlm_sql (sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'casdb_tenant1' on Localhost via UNIX socket, server version 10.3.35-MariaDB, protocol version 10
rlm_sql (sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'casdb_tenant1' on Localhost via UNIX socket, server version 10.3.35-MariaDB, protocol version 10
rlm_sql (sql): Processing generate_sql_clients
rlm_sql (sql) in generate_sql_clients: query is SELECT id, nasname, shortname, type, secret, server FROM radclients
rlm_sql (sql): Reserved connection (0)
rlm_sql (sql): Executing select query: SELECT id, nasname, shortname, type, secret, server FROM radclients
rlm_sql (sql): Adding client 10.0.8.150 (rheloscap) to global clients list
rlm_sql (10.0.8.150): Client "rheloscap" (sql) added
rlm_sql (sql): Adding client 10.0.1.148 (RHwinreg) to global clients list
rlm_sql (10.0.1.148): Client "RHwinreg" (sql) added
rlm_sql (sql): Released connection (0)
Need 5 more connections to reach 10 spares
rlm_sql (sql): Opening additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'casdb_tenant1' on Localhost via UNIX socket, server version 10.3.35-MariaDB, protocol version 10
# Instantiating module "reject" from file /etc/raddb/mods-enabled/always
# Instantiating module "fail" from file /etc/raddb/mods-enabled/always
# Instantiating module "ok" from file /etc/raddb/mods-enabled/always
# Instantiating module "handled" from file /etc/raddb/mods-enabled/always
# Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
# Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
# Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
# Instantiating module "noop" from file /etc/raddb/mods-enabled/always
# Instantiating module "updated" from file /etc/raddb/mods-enabled/always
# Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
# Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
# Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
# Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
# Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
# Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap
rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
# Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
# Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output
# Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log
# Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration
# Instantiating module "files" from file /etc/raddb/mods-enabled/files
reading pairlist file /etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
# Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog
# Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime
# Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
rlm_mschap (mschap): using internal authentication
# Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
# Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
# Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
# Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
# Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
# Instantiating module "bangpath" from file /etc/raddb/mods-enabled/realm
# Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm
# Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
# Instantiating module "perl" from file /etc/raddb/mods-enabled/perl
} # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server mysite { # from file /etc/raddb/sites-enabled/mysite
# Loading authenticate {...}
# Loading authorize {...}
# Loading post-auth {...}
} # server mysite
radiusd: #### Opening IP addresses and Ports ####
listen {
type = "control"
listen {
socket = "/var/run/radiusd/radiusd.sock"
peercred = yes
}
}
listen {
type = "auth"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
listen {
type = "acct"
ipaddr = *
port = 0
limit {
max_connections = 16
lifetime = 0
idle_timeout = 30
}
}
Listening on command file /var/run/radiusd/radiusd.sock
Listening on auth address * port 1812 bound to server mysite
Listening on acct address * port 1813 bound to server mysite
Listening on proxy address * port 44656
Ready to process requests
More information about the Freeradius-Users
mailing list