Timeout and TLS handshake
George Benjin
george.benjin at gmail.com
Wed Apr 2 00:51:42 UTC 2025
I haven't run up FreeRADIUS in ACA or ACI but suspect it might be due
to this: https://lists.freeradius.org/pipermail/freeradius-users/2024-September/104753.html
>>>
You need to be very careful running a RADIUS server in Azure if you're
using RADIUS/UDP.
Azure has a network security feature on by default that drops
fragmented UDP packets that arrive out of order. This negatively
impacts RADIUS/UDP traffic.
To give you an example, at least 20% of EAP-TLS auth attempts were
failing for us in the cert auth phase due to this issue.
Azure support can turn on the 'enable-udp-fragment-reordering' feature
by request after providing packet captures and use case info etc. They
will also only turn it on in a brand new subscription that's dedicated
to running VMs that require this feature. After we did this, our auth
success rate increased to 100%.
Another thing to be wary of is setting 'tls_max_version' to 1.3.
Windows 11 supports TLS 1.3 by default for EAP-TLS etc but does not
yet support session resumption when using this protocol (see
https://learn.microsoft.com/en-us/windows-server/networking/technologies/extensible-authentication-protocol/windows-11-changes).
It's worth dropping the Max version to 1.2.
>>>
Try implementing RadSec if your equipment supports it.
On Wed, 2 Apr 2025 at 01:47, Sam Hutchings <samhutchings1415 at gmail.com> wrote:
>
> Hi,
>
> Please can you advise why the connection is not succeeding?
>
> The Problem:
> A Windows client is not succeeding authentication and the debug does
> not show that the TLS handshake completes over WAN; the server is
> hosted in Azure Container Instance. I have tested the same container
> locally on the LAN which is working OK (docker container running on a
> VM with a separate laptop with 802.1x configured with a switch set as
> the NAC).
>
> I can see the TLS handshake when comparing to a working example seems
> to be missing the below:
>
> (6) &session-state:TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384"
> (6) &session-state:TLS-Session-Version = "TLS 1.3"
> (6) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Finished"
>
> What you are trying to do: Authenticate a Windows client via 802.1X
> with EAP-TLS over the internet to an Azure Container Instance running
> freeRADIUS.
>
> This is behind a load balancer with a public IP, which includes a
> health check on port 8080. This works when using eapol_test but not
> when using Windows authentication. Although, this works for both
> Windows and eapol_test when running the container on the local
> network.
>
> why you are trying to do it: Understand why this fails the TLS
> handshake over the internet.
>
> what you expect the server to do: TLS handshake to complete and
> authentication request to receive an Access-Accept
>
> what the server does instead (i.e. debug output):
>
> FreeRADIUS Version 3.2.7
> Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
> There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> PARTICULAR PURPOSE
> You may redistribute copies of FreeRADIUS under the terms of the
> GNU General Public License
> For more information about these matters, see the file named COPYRIGHT
> Starting - reading configuration files ...
> including dictionary file /usr/share/freeradius/dictionary
> including dictionary file /usr/share/freeradius/dictionary.dhcp
> including dictionary file /usr/share/freeradius/dictionary.vqp
> including dictionary file /etc/freeradius/dictionary
> including configuration file /etc/freeradius/radiusd.conf
> including configuration file /etc/freeradius/proxy.conf
> including configuration file /etc/freeradius/clients.conf
> including files in directory /etc/freeradius/mods-enabled/
> including configuration file /etc/freeradius/mods-enabled/always
> including configuration file /etc/freeradius/mods-enabled/attr_filter
> including configuration file /etc/freeradius/mods-enabled/chap
> including configuration file /etc/freeradius/mods-enabled/date
> including configuration file /etc/freeradius/mods-enabled/detail
> including configuration file /etc/freeradius/mods-enabled/detail.log
> including configuration file /etc/freeradius/mods-enabled/digest
> including configuration file /etc/freeradius/mods-enabled/dynamic_clients
> including configuration file /etc/freeradius/mods-enabled/eap
> including configuration file /etc/freeradius/mods-enabled/echo
> including configuration file /etc/freeradius/mods-enabled/exec
> including configuration file /etc/freeradius/mods-enabled/expiration
> including configuration file /etc/freeradius/mods-enabled/expr
> including configuration file /etc/freeradius/mods-enabled/files
> including configuration file /etc/freeradius/mods-enabled/linelog
> including configuration file /etc/freeradius/mods-enabled/logintime
> including configuration file /etc/freeradius/mods-enabled/mschap
> including configuration file /etc/freeradius/mods-enabled/ntlm_auth
> including configuration file /etc/freeradius/mods-enabled/pap
> including configuration file /etc/freeradius/mods-enabled/passwd
> including configuration file /etc/freeradius/mods-enabled/preprocess
> including configuration file /etc/freeradius/mods-enabled/proxy_rate_limit
> including configuration file /etc/freeradius/mods-enabled/radutmp
> including configuration file /etc/freeradius/mods-enabled/realm
> including configuration file /etc/freeradius/mods-enabled/replicate
> including configuration file /etc/freeradius/mods-enabled/soh
> including configuration file /etc/freeradius/mods-enabled/sradutmp
> including configuration file /etc/freeradius/mods-enabled/totp
> including configuration file /etc/freeradius/mods-enabled/unix
> including configuration file /etc/freeradius/mods-enabled/unpack
> including configuration file /etc/freeradius/mods-enabled/utf8
> including files in directory /etc/freeradius/policy.d/
> including configuration file /etc/freeradius/policy.d/abfab-tr
> including configuration file /etc/freeradius/policy.d/accounting
> including configuration file /etc/freeradius/policy.d/canonicalization
> including configuration file /etc/freeradius/policy.d/control
> including configuration file /etc/freeradius/policy.d/cui
> including configuration file /etc/freeradius/policy.d/debug
> including configuration file /etc/freeradius/policy.d/dhcp
> including configuration file /etc/freeradius/policy.d/eap
> including configuration file /etc/freeradius/policy.d/filter
> including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
> including configuration file /etc/freeradius/policy.d/operator-name
> including configuration file /etc/freeradius/policy.d/rfc7542
> including files in directory /etc/freeradius/sites-enabled/
> including configuration file /etc/freeradius/sites-enabled/default
> including configuration file /etc/freeradius/sites-enabled/inner-tunnel
> including configuration file /etc/freeradius/sites-enabled/check-eap-tls
> including configuration file /etc/freeradius/sites-enabled/status
> main {
> security {
> allow_core_dumps = no
> }
> name = "radiusd"
> prefix = "@prefix@"
> localstatedir = "@localstatedir@"
> logdir = "@logdir@"
> run_dir = "@localstatedir@/run/radiusd"
> }
> main {
> name = "radiusd"
> prefix = "@prefix@"
> localstatedir = "@localstatedir@"
> sbindir = "@sbindir@"
> logdir = "@logdir@"
> run_dir = "@localstatedir@/run/radiusd"
> libdir = "@libdir@"
> radacctdir = "@radacctdir@"
> hostname_lookups = no
> max_request_time = 30
> proxy_dedup_window = 1
> cleanup_delay = 30
> max_requests = 16384
> max_fds = 512
> postauth_client_lost = no
> pidfile = "@localstatedir@/run/radiusd/radiusd.pid"
> checkrad = "@sbindir@/checkrad"
> debug_level = 0
> proxy_requests = yes
> log {
> stripped_names = no
> auth = no
> auth_badpass = no
> auth_goodpass = no
> colourise = yes
> msg_denied = "You are already logged in - access denied"
> }
> resources {
> }
> security {
> max_attributes = 200
> reject_delay = 1.000000
> status_server = yes
> require_message_authenticator = "auto"
> limit_proxy_state = "auto"
> }
> unlang {
> group_stop_return = no
> policy_stop_return = no
> }
> }
> radiusd: #### Loading Realms and Home Servers ####
> proxy server {
> retry_delay = 5
> retry_count = 3
> default_fallback = no
> dead_time = 120
> wake_all_if_all_dead = no
> }
> home_server localhost {
> nonblock = no
> ipaddr = 127.0.0.1
> port = 1812
> type = "auth"
> secret = <<< secret >>>
> response_window = 20.000000
> response_timeouts = 1
> max_outstanding = 65536
> zombie_period = 40
> status_check = "status-server"
> ping_interval = 30
> check_interval = 30
> check_timeout = 4
> num_answers_to_alive = 3
> revive_interval = 120
> limit {
> max_connections = 16
> max_requests = 0
> lifetime = 0
> idle_timeout = 0
> }
> coa {
> irt = 2
> mrt = 16
> mrc = 5
> mrd = 30
> }
> }
> home_server_pool my_auth_failover {
> type = fail-over
> home_server = localhost
> }
> realm example.com {
> auth_pool = my_auth_failover
> }
> realm LOCAL {
> }
> radiusd: #### Loading Clients ####
> client localhost {
> ipaddr = 127.0.0.1
> require_message_authenticator = "auto"
> limit_proxy_state = "auto"
> secret = <<< secret >>>
> proto = "*"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Shared secret for client localhost is short, and likely can be broken
> by an attacker.
> client localhost_ipv6 {
> ipv6addr = ::1
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Shared secret for client localhost_ipv6 is short, and likely can be
> broken by an attacker.
> client radiustesting {
> ipaddr = 185.241.224.187
> secret = <<< secret >>>
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> Debug state unknown (cap_sys_ptrace capability not set)
> Configuration version: 7161-5ad1-6c77-638f
> systemd watchdog is disabled
> # Creating Auth-Type = mschap
> # Creating Auth-Type = digest
> # Creating Auth-Type = eap
> # Creating Auth-Type = PAP
> # Creating Auth-Type = CHAP
> # Creating Auth-Type = MS-CHAP
> # Creating Autz-Type = New-TLS-Connection
> # Creating Autz-Type = Status-Server
> radiusd: #### Instantiating modules ####
> modules {
> # Loaded module rlm_always
> # Loading module "reject" from file /etc/freeradius/mods-enabled/always
> always reject {
> rcode = "reject"
> simulcount = 0
> mpp = no
> }
> # Loading module "fail" from file /etc/freeradius/mods-enabled/always
> always fail {
> rcode = "fail"
> simulcount = 0
> mpp = no
> }
> # Loading module "ok" from file /etc/freeradius/mods-enabled/always
> always ok {
> rcode = "ok"
> simulcount = 0
> mpp = no
> }
> # Loading module "handled" from file /etc/freeradius/mods-enabled/always
> always handled {
> rcode = "handled"
> simulcount = 0
> mpp = no
> }
> # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
> always invalid {
> rcode = "invalid"
> simulcount = 0
> mpp = no
> }
> # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
> always userlock {
> rcode = "userlock"
> simulcount = 0
> mpp = no
> }
> # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
> always notfound {
> rcode = "notfound"
> simulcount = 0
> mpp = no
> }
> # Loading module "noop" from file /etc/freeradius/mods-enabled/always
> always noop {
> rcode = "noop"
> simulcount = 0
> mpp = no
> }
> # Loading module "updated" from file /etc/freeradius/mods-enabled/always
> always updated {
> rcode = "updated"
> simulcount = 0
> mpp = no
> }
> # Loaded module rlm_attr_filter
> # Loading module "attr_filter.post-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.post-proxy {
> filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.pre-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.pre-proxy {
> filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
> key = "%{Realm}"
> relaxed = no
> }
> # Loading module "attr_filter.access_reject" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.access_reject {
> filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.access_challenge" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.access_challenge {
> filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.accounting_response" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.accounting_response {
> filename =
> "/etc/freeradius/mods-config/attr_filter/accounting_response"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loading module "attr_filter.coa" from file
> /etc/freeradius/mods-enabled/attr_filter
> attr_filter attr_filter.coa {
> filename = "/etc/freeradius/mods-config/attr_filter/coa"
> key = "%{User-Name}"
> relaxed = no
> }
> # Loaded module rlm_chap
> # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
> # Loaded module rlm_date
> # Loading module "date" from file /etc/freeradius/mods-enabled/date
> date {
> format = "%b %e %Y %H:%M:%S %Z"
> utc = no
> }
> # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date
> date wispr2date {
> format = "%Y-%m-%dT%H:%M:%S"
> utc = no
> }
> # Loaded module rlm_detail
> # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
> detail {
> filename =
> "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
> detail auth_log {
> filename =
> "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
> detail reply_log {
> filename =
> "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "pre_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> detail pre_proxy_log {
> filename =
> "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loading module "post_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> detail post_proxy_log {
> filename =
> "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> header = "%t"
> permissions = 384
> locking = no
> dates_as_integer = no
> escape_filenames = no
> log_packet_header = no
> }
> # Loaded module rlm_digest
> # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
> # Loaded module rlm_dynamic_clients
> # Loading module "dynamic_clients" from file
> /etc/freeradius/mods-enabled/dynamic_clients
> # Loaded module rlm_eap
> # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
> eap {
> default_eap_type = "tls"
> timer_expire = 60
> max_eap_type = 52
> ignore_unknown_eap_types = no
> cisco_accounting_username_bug = no
> max_sessions = 16384
> dedup_key = "%{Calling-Station-Id}"
> }
> # Loaded module rlm_exec
> # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
> exec echo {
> wait = yes
> program = "/bin/echo %{User-Name}"
> input_pairs = "request"
> output_pairs = "reply"
> shell_escape = yes
> }
> # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
> exec {
> wait = no
> input_pairs = "request"
> shell_escape = yes
> timeout = 10
> }
> # Loaded module rlm_expiration
> # Loading module "expiration" from file
> /etc/freeradius/mods-enabled/expiration
> # Loaded module rlm_expr
> # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
> expr {
> safe_characters =
> "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> }
> # Loaded module rlm_files
> # Loading module "files" from file /etc/freeradius/mods-enabled/files
> files {
> filename = "/etc/freeradius/mods-config/files/authorize"
> acctusersfile = "/etc/freeradius/mods-config/files/accounting"
> preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
> }
> # Loaded module rlm_linelog
> # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
> linelog {
> filename = "@logdir@/linelog"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = "This is a log message for %{User-Name}"
> reference = "messages.%{%{reply:Packet-Type}:-default}"
> }
> # Loading module "log_accounting" from file
> /etc/freeradius/mods-enabled/linelog
> linelog log_accounting {
> filename = "@logdir@/linelog-accounting"
> escape_filenames = no
> syslog_severity = "info"
> permissions = 384
> format = ""
> reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> }
> # Loaded module rlm_logintime
> # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
> logintime {
> minimum_timeout = 60
> }
> # Loaded module rlm_mschap
> # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
> mschap {
> use_mppe = yes
> require_encryption = no
> require_strong = no
> with_ntdomain_hack = yes
> passchange {
> }
> allow_retry = yes
> winbind_retry_with_normalised_username = no
> }
> # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
> exec ntlm_auth {
> wait = yes
> program = "/path/to/ntlm_auth --request-nt-key
> --domain=MYDOMAIN --username=%{mschap:User-Name}
> --password=%{User-Password}"
> shell_escape = yes
> }
> # Loaded module rlm_pap
> # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
> pap {
> normalise = yes
> }
> # Loaded module rlm_passwd
> # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
> passwd etc_passwd {
> filename = "/etc/passwd"
> format = "*User-Name:Crypt-Password:"
> delimiter = ":"
> ignore_nislike = no
> ignore_empty = yes
> allow_multiple_keys = no
> hash_size = 100
> }
> # Loaded module rlm_preprocess
> # Loading module "preprocess" from file
> /etc/freeradius/mods-enabled/preprocess
> preprocess {
> huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
> hints = "/etc/freeradius/mods-config/preprocess/hints"
> with_ascend_hack = no
> ascend_channels_per_line = 23
> with_ntdomain_hack = no
> with_specialix_jetstream_hack = no
> with_cisco_vsa_hack = no
> with_alvarion_vsa_hack = no
> }
> # Loaded module rlm_proxy_rate_limit
> # Loading module "proxy_rate_limit" from file
> /etc/freeradius/mods-enabled/proxy_rate_limit
> proxy_rate_limit {
> max_entries = 2048
> idle_timeout = 10
> num_subtables = 256
> window = 1
> }
> # Loaded module rlm_radutmp
> # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
> radutmp {
> filename = "@logdir@/radutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 384
> caller_id = yes
> }
> # Loaded module rlm_realm
> # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
> realm IPASS {
> format = "prefix"
> delimiter = "/"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
> realm suffix {
> format = "suffix"
> delimiter = "@"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm
> realm bangpath {
> format = "prefix"
> delimiter = "!"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
> realm realmpercent {
> format = "suffix"
> delimiter = "%"
> ignore_default = no
> ignore_null = no
> }
> # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
> realm ntdomain {
> format = "prefix"
> delimiter = "\"
> ignore_default = no
> ignore_null = no
> }
> # Loaded module rlm_replicate
> # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
> # Loaded module rlm_soh
> # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
> soh {
> dhcp = yes
> }
> # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
> radutmp sradutmp {
> filename = "@logdir@/sradutmp"
> username = "%{User-Name}"
> case_sensitive = yes
> check_with_nas = yes
> permissions = 420
> caller_id = no
> }
> # Loaded module rlm_totp
> # Loading module "totp" from file /etc/freeradius/mods-enabled/totp
> totp {
> time_step = 30
> otp_length = 6
> lookback_steps = 1
> lookback_interval = 30
> lookforward_steps = 0
> }
> # Loaded module rlm_unix
> # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
> unix {
> radwtmp = "@logdir@/radwtmp"
> }
> Creating attribute Unix-Group
> # Loaded module rlm_unpack
> # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
> # Loaded module rlm_utf8
> # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
> instantiate {
> }
> # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "userlock" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "notfound" from file
> /etc/freeradius/mods-enabled/always
> # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
> # Instantiating module "attr_filter.post-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
> # Instantiating module "attr_filter.pre-proxy" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
> # Instantiating module "attr_filter.access_reject" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
> # Instantiating module "attr_filter.access_challenge" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
> # Instantiating module "attr_filter.accounting_response" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file
> /etc/freeradius/mods-config/attr_filter/accounting_response
> # Instantiating module "attr_filter.coa" from file
> /etc/freeradius/mods-enabled/attr_filter
> reading pairlist file /etc/freeradius/mods-config/attr_filter/coa
> # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
> # Instantiating module "auth_log" from file
> /etc/freeradius/mods-enabled/detail.log
> rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> detail output
> # Instantiating module "reply_log" from file
> /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "pre_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> # Instantiating module "post_proxy_log" from file
> /etc/freeradius/mods-enabled/detail.log
> /etc/freeradius/mods-enabled/eap[56]: Found dynamic expansion in
> string which will not be dynamically expanded
> # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
> # Linked to sub-module rlm_eap_md5
> # Linked to sub-module rlm_eap_gtc
> gtc {
> challenge = "Password: "
> auth_type = "PAP"
> }
> # Linked to sub-module rlm_eap_tls
> tls {
> tls = "tls-common"
> virtual_server = "check-eap-tls"
> }
> tls-config tls-common {
> verify_depth = 0
> ca_path = "/etc/freeradius/certs"
> pem_file_type = yes
> private_key_file = "/etc/freeradius/certs/server.pem"
> certificate_file = "/etc/freeradius/certs/server.pem"
> ca_file = "/etc/freeradius/certs/ca.pem"
> private_key_password = <<< secret >>>
> fragment_size = 1024
> include_length = yes
> auto_chain = yes
> check_crl = no
> check_all_crl = no
> ca_path_reload_interval = 0
> cipher_list = "DEFAULT"
> cipher_server_preference = no
> reject_unknown_intermediate_ca = no
> ecdh_curve = ""
> tls_max_version = "1.3"
> tls_min_version = "1.2"
> cache {
> enable = no
> lifetime = 24
> max_entries = 255
> }
> verify {
> skip_if_ocsp_ok = no
> }
> ocsp {
> enable = no
> override_cert_url = yes
> url = "http://127.0.0.1/ocsp/"
> use_nonce = yes
> timeout = 0
> softfail = no
> }
> }
> # Linked to sub-module rlm_eap_ttls
> ttls {
> tls = "tls-common"
> default_eap_type = "md5"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> virtual_server = "inner-tunnel"
> include_length = yes
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_peap
> peap {
> tls = "tls-common"
> default_eap_type = "mschapv2"
> copy_request_to_tunnel = no
> use_tunneled_reply = no
> proxy_tunneled_request_as_eap = yes
> virtual_server = "inner-tunnel"
> soh = no
> require_client_cert = no
> }
> tls: Using cached TLS configuration from previous invocation
> # Linked to sub-module rlm_eap_mschapv2
> mschapv2 {
> with_ntdomain_hack = no
> send_error = no
> }
> # Instantiating module "expiration" from file
> /etc/freeradius/mods-enabled/expiration
> # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
> reading pairlist file /etc/freeradius/mods-config/files/authorize
> reading pairlist file /etc/freeradius/mods-config/files/accounting
> reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
> # Instantiating module "linelog" from file
> /etc/freeradius/mods-enabled/linelog
> # Instantiating module "log_accounting" from file
> /etc/freeradius/mods-enabled/linelog
> # Instantiating module "logintime" from file
> /etc/freeradius/mods-enabled/logintime
> # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
> rlm_mschap (mschap): using internal authentication
> # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
> # Instantiating module "etc_passwd" from file
> /etc/freeradius/mods-enabled/passwd
> rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> # Instantiating module "preprocess" from file
> /etc/freeradius/mods-enabled/preprocess
> reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
> reading pairlist file /etc/freeradius/mods-config/preprocess/hints
> # Instantiating module "proxy_rate_limit" from file
> /etc/freeradius/mods-enabled/proxy_rate_limit
> # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "realmpercent" from file
> /etc/freeradius/mods-enabled/realm
> # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
> # Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp
> } # modules
> radiusd: #### Loading Virtual Servers ####
> server { # from file /etc/freeradius/radiusd.conf
> } # server
> server default { # from file /etc/freeradius/sites-enabled/default
> # Loading authenticate {...}
> Compiling Auth-Type PAP for attr Auth-Type
> Compiling Auth-Type CHAP for attr Auth-Type
> Compiling Auth-Type MS-CHAP for attr Auth-Type
> # Loading authorize {...}
> Ignoring "sql" (see raddb/mods-available/README.rst)
> Ignoring "ldap" (see raddb/mods-available/README.rst)
> Compiling Autz-Type New-TLS-Connection for attr Autz-Type
> # Loading preacct {...}
> # Loading accounting {...}
> # Loading post-auth {...}
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
> Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
> } # server default
> server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
> # Loading authenticate {...}
> Compiling Auth-Type PAP for attr Auth-Type
> Compiling Auth-Type CHAP for attr Auth-Type
> Compiling Auth-Type MS-CHAP for attr Auth-Type
> # Loading authorize {...}
> # Loading post-proxy {...}
> # Loading post-auth {...}
> # Skipping contents of 'if' as it is always 'false' --
> /etc/freeradius/sites-enabled/inner-tunnel:366
> Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> } # server inner-tunnel
> server check-eap-tls { # from file /etc/freeradius/sites-enabled/check-eap-tls
> # Loading authorize {...}
> } # server check-eap-tls
> server status { # from file /etc/freeradius/sites-enabled/status
> # Loading authorize {...}
> Compiling Autz-Type Status-Server for attr Autz-Type
> } # server status
> radiusd: #### Opening IP addresses and Ports ####
> listen {
> type = "auth"
> ipaddr = *
> port = 0
> limit {
> max_connections = 128
> lifetime = 30
> idle_timeout = 60
> }
> Setting idle_timeout to 0
> }
> listen {
> type = "acct"
> ipaddr = *
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "acct"
> ipv6addr = ::
> port = 0
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> listen {
> type = "auth"
> ipaddr = 127.0.0.1
> port = 18120
> }
> listen {
> type = "status"
> ipaddr = *
> port = 8080
> proto = "tcp"
> limit {
> max_connections = 64
> lifetime = 15
> idle_timeout = 30
> }
> Setting idle_timeout to 0
> clients = "azure_lb"
> client azure_lb {
> ipaddr = 168.63.129.16
> secret = <<< secret >>>
> proto = "tcp"
> limit {
> max_connections = 16
> lifetime = 0
> idle_timeout = 30
> }
> }
> }
> Listening on auth address * port 1812 bound to server default
> Listening on acct address * port 1813 bound to server default
> Listening on auth address :: port 1812 bound to server default
> Listening on acct address :: port 1813 bound to server default
> Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> Listening on status proto tcp address * port 8080 bound to server status
> Listening on proxy address * port 47097
> Listening on proxy address :: port 33982
> Ready to process requests
> ... new connection request on TCP socket
> Listening on status from client (168.63.129.16, 54790) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.8 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 54790) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 54858) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.8 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 54858) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 54946) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.8 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 54946) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55023) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.8 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55023) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55116) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.8 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55116) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55188) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.8 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55188) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55271) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.8 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55271) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55341) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55341) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55411) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55411) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55486) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55486) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55575) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55575) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55631) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55631) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55721) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55721) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55790) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55790) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 55987) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 55987) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Failed inserting TCP socket into parent list.
> Listening on status from client (168.63.129.16, 56081) -> (*, 8080,
> virtual-server=status)
> Waking up in 0.7 seconds.
> Waking up in 14.4 seconds.
> Client has closed connection
> ... shutting down socket status from client (168.63.129.16, 56081) ->
> (*, 8080, virtual-server=status)
> Ready to process requests
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Ready to process requests
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Ready to process requests
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Ready to process requests
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Ready to process requests
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Ready to process requests
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Ready to process requests
> (0) Received Access-Request Id 225 from 185.241.224.187:35356 to
> 10.0.0.5:1812 length 195
> (0) NAS-IP-Address = 192.168.1.112
> (0) NAS-Port-Type = Ethernet
> (0) NAS-Port = 4
> (0) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> (0) Acct-Session-Id = "0500003F"
> (0) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> (0) Calling-Station-Id = "28-00-AF-0F-A8-32"
> (0) EAP-Message =
> 0x0201002e01686f73742f33353365633031342d356337302d346534632d613763382d623963386235383630333532
> (0) Message-Authenticator = 0xfd9f875e95feb822675be4ee23747c02
> (0) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (0) authorize {
> (0) policy filter_username {
> (0) if (&User-Name) {
> (0) if (&User-Name) -> TRUE
> (0) if (&User-Name) {
> (0) if (&User-Name =~ / /) {
> (0) if (&User-Name =~ / /) -> FALSE
> (0) if (&User-Name =~ /@[^@]*@/ ) {
> (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (0) if (&User-Name =~ /\.\./ ) {
> (0) if (&User-Name =~ /\.\./ ) -> FALSE
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (0) if (&User-Name =~ /\.$/) {
> (0) if (&User-Name =~ /\.$/) -> FALSE
> (0) if (&User-Name =~ /@\./) {
> (0) if (&User-Name =~ /@\./) -> FALSE
> (0) } # if (&User-Name) = notfound
> (0) } # policy filter_username = notfound
> (0) [preprocess] = ok
> (0) [chap] = noop
> (0) [mschap] = noop
> (0) [digest] = noop
> (0) suffix: Checking for suffix after "@"
> (0) suffix: No '@' in User-Name =
> "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> (0) suffix: No such realm "NULL"
> (0) [suffix] = noop
> (0) eap: Peer sent EAP Response (code 2) ID 1 length 46
> (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
> the rest of authorize
> (0) [eap] = ok
> (0) } # authorize = ok
> (0) Found Auth-Type = eap
> (0) # Executing group from file /etc/freeradius/sites-enabled/default
> (0) authenticate {
> (0) eap: EXPAND %{Calling-Station-Id}
> (0) eap: --> 28-00-AF-0F-A8-32
> (0) eap: Peer sent packet with method EAP Identity (1)
> (0) eap: Using default_eap_type = TLS
> (0) eap: Calling submodule eap_tls to process data
> (0) eap_tls: (TLS) TLS -Initiating new session
> (0) eap_tls: (TLS) TLS - Setting verify mode to require certificate from client
> (0) eap: Sending EAP Request (code 1) ID 2 length 6
> (0) eap: EAP session adding &reply:State = 0xa960c76da962ca67
> (0) [eap] = handled
> (0) } # authenticate = handled
> (0) Using Post-Auth-Type Challenge
> (0) # Executing group from file /etc/freeradius/sites-enabled/default
> (0) Challenge { ... } # empty sub-section is ignored
> (0) session-state: Saving cached attributes
> (0) Framed-MTU = 994
> (0) Sent Access-Challenge Id 225 from 10.0.0.5:1812 to
> 185.241.224.187:35356 length 64
> (0) EAP-Message = 0x010200060d20
> (0) Message-Authenticator = 0x00000000000000000000000000000000
> (0) State = 0xa960c76da962ca67c033c547c41b2362
> (0) Finished request
> Waking up in 29.9 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 25.3 seconds.
> (1) Received Access-Request Id 226 from 185.241.224.187:35356 to
> 10.0.0.5:1812 length 436
> (1) NAS-IP-Address = 192.168.1.112
> (1) NAS-Port-Type = Ethernet
> (1) NAS-Port = 4
> (1) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> (1) Acct-Session-Id = "0500003F"
> (1) State = 0xa960c76da962ca67c033c547c41b2362
> (1) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> (1) Calling-Station-Id = "28-00-AF-0F-A8-32"
> (1) EAP-Message =
> 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
> (1) Message-Authenticator = 0xcc559b3212a95756ea6a742fc1963909
> (1) Restoring &session-state
> (1) &session-state:Framed-MTU = 994
> (1) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (1) authorize {
> (1) policy filter_username {
> (1) if (&User-Name) {
> (1) if (&User-Name) -> TRUE
> (1) if (&User-Name) {
> (1) if (&User-Name =~ / /) {
> (1) if (&User-Name =~ / /) -> FALSE
> (1) if (&User-Name =~ /@[^@]*@/ ) {
> (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (1) if (&User-Name =~ /\.\./ ) {
> (1) if (&User-Name =~ /\.\./ ) -> FALSE
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (1) if (&User-Name =~ /\.$/) {
> (1) if (&User-Name =~ /\.$/) -> FALSE
> (1) if (&User-Name =~ /@\./) {
> (1) if (&User-Name =~ /@\./) -> FALSE
> (1) } # if (&User-Name) = notfound
> (1) } # policy filter_username = notfound
> (1) [preprocess] = ok
> (1) [chap] = noop
> (1) [mschap] = noop
> (1) [digest] = noop
> (1) suffix: Checking for suffix after "@"
> (1) suffix: No '@' in User-Name =
> "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> (1) suffix: No such realm "NULL"
> (1) [suffix] = noop
> (1) eap: Peer sent EAP Response (code 2) ID 2 length 267
> (1) eap: No EAP Start, assuming it's an on-going EAP conversation
> (1) [eap] = updated
> (1) [files] = noop
> (1) [expiration] = noop
> (1) [logintime] = noop
> (1) [pap] = noop
> (1) } # authorize = updated
> (1) Found Auth-Type = eap
> (1) # Executing group from file /etc/freeradius/sites-enabled/default
> (1) authenticate {
> (1) eap: Removing EAP session with state 0xa960c76da962ca67
> (1) eap: Previous EAP request found for state 0xa960c76da962ca67,
> released from the list
> (1) eap: Peer sent packet with method EAP TLS (13)
> (1) eap: Calling submodule eap_tls to process data
> (1) eap_tls: (TLS) EAP Peer says that the final record size will be 257 bytes
> (1) eap_tls: (TLS) EAP Got all data (257 bytes)
> (1) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
> (1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
> (1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
> (1) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
> (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client hello
> (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, ServerHello
> (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server hello
> (1) eap_tls: (TLS) TLS - send TLS 1.3 ChangeCipherSpec
> (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
> change cipher spec
> (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, EncryptedExtensions
> (1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write
> encrypted extensions
> (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateRequest
> (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
> certificate request
> (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Certificate
> (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write certificate
> (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateVerify
> (1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write server
> certificate verify
> (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Finished
> (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
> (1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 early data
> (1) eap_tls: (TLS) TLS - Server : Need to read more data: TLSv1.3 early data
> (1) eap_tls: (TLS) TLS - In Handshake Phase
> (1) eap: Sending EAP Request (code 1) ID 3 length 1000
> (1) eap: EAP session adding &reply:State = 0xa960c76da863ca67
> (1) [eap] = handled
> (1) } # authenticate = handled
> (1) Using Post-Auth-Type Challenge
> (1) # Executing group from file /etc/freeradius/sites-enabled/default
> (1) Challenge { ... } # empty sub-section is ignored
> (1) session-state: Saving cached attributes
> (1) Framed-MTU = 994
> (1) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> ClientHello"
> (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> ServerHello"
> (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> EncryptedExtensions"
> (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateRequest"
> (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> Certificate"
> (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateVerify"
> (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> (1) Sent Access-Challenge Id 226 from 10.0.0.5:1812 to
> 185.241.224.187:35356 length 1064
> (1) EAP-Message =
> 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
> (1) Message-Authenticator = 0x00000000000000000000000000000000
> (1) State = 0xa960c76da863ca67c033c547c41b2362
> (1) Finished request
> Waking up in 20.9 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 20.3 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 15.3 seconds.
> (2) Received Access-Request Id 227 from 185.241.224.187:35356 to
> 10.0.0.5:1812 length 173
> (2) NAS-IP-Address = 192.168.1.112
> (2) NAS-Port-Type = Ethernet
> (2) NAS-Port = 4
> (2) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> (2) Acct-Session-Id = "0500003F"
> (2) State = 0xa960c76da863ca67c033c547c41b2362
> (2) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> (2) Calling-Station-Id = "28-00-AF-0F-A8-32"
> (2) EAP-Message = 0x020300060d00
> (2) Message-Authenticator = 0xbf0af695bb5ac349944293a07a61472c
> (2) Restoring &session-state
> (2) &session-state:Framed-MTU = 994
> (2) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
> 1.3 Handshake, ClientHello"
> (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, ServerHello"
> (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 ChangeCipherSpec"
> (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, EncryptedExtensions"
> (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, CertificateRequest"
> (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Certificate"
> (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, CertificateVerify"
> (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Finished"
> (2) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (2) authorize {
> (2) policy filter_username {
> (2) if (&User-Name) {
> (2) if (&User-Name) -> TRUE
> (2) if (&User-Name) {
> (2) if (&User-Name =~ / /) {
> (2) if (&User-Name =~ / /) -> FALSE
> (2) if (&User-Name =~ /@[^@]*@/ ) {
> (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (2) if (&User-Name =~ /\.\./ ) {
> (2) if (&User-Name =~ /\.\./ ) -> FALSE
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (2) if (&User-Name =~ /\.$/) {
> (2) if (&User-Name =~ /\.$/) -> FALSE
> (2) if (&User-Name =~ /@\./) {
> (2) if (&User-Name =~ /@\./) -> FALSE
> (2) } # if (&User-Name) = notfound
> (2) } # policy filter_username = notfound
> (2) [preprocess] = ok
> (2) [chap] = noop
> (2) [mschap] = noop
> (2) [digest] = noop
> (2) suffix: Checking for suffix after "@"
> (2) suffix: No '@' in User-Name =
> "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> (2) suffix: No such realm "NULL"
> (2) [suffix] = noop
> (2) eap: Peer sent EAP Response (code 2) ID 3 length 6
> (2) eap: No EAP Start, assuming it's an on-going EAP conversation
> (2) [eap] = updated
> (2) [files] = noop
> (2) [expiration] = noop
> (2) [logintime] = noop
> (2) [pap] = noop
> (2) } # authorize = updated
> (2) Found Auth-Type = eap
> (2) # Executing group from file /etc/freeradius/sites-enabled/default
> (2) authenticate {
> (2) eap: Removing EAP session with state 0xa960c76da863ca67
> (2) eap: Previous EAP request found for state 0xa960c76da863ca67,
> released from the list
> (2) eap: Peer sent packet with method EAP TLS (13)
> (2) eap: Calling submodule eap_tls to process data
> (2) eap_tls: (TLS) Peer ACKed our handshake fragment
> (2) eap: Sending EAP Request (code 1) ID 4 length 1000
> (2) eap: EAP session adding &reply:State = 0xa960c76dab64ca67
> (2) [eap] = handled
> (2) } # authenticate = handled
> (2) Using Post-Auth-Type Challenge
> (2) # Executing group from file /etc/freeradius/sites-enabled/default
> (2) Challenge { ... } # empty sub-section is ignored
> (2) session-state: Saving cached attributes
> (2) Framed-MTU = 994
> (2) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> ClientHello"
> (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> ServerHello"
> (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> EncryptedExtensions"
> (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateRequest"
> (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> Certificate"
> (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateVerify"
> (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> (2) Sent Access-Challenge Id 227 from 10.0.0.5:1812 to
> 185.241.224.187:35356 length 1064
> (2) EAP-Message =
> 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
> (2) Message-Authenticator = 0x00000000000000000000000000000000
> (2) State = 0xa960c76dab64ca67c033c547c41b2362
> (2) Finished request
> Waking up in 11.8 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 10.3 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 5.3 seconds.
> (3) Received Access-Request Id 228 from 185.241.224.187:35356 to
> 10.0.0.5:1812 length 173
> (3) NAS-IP-Address = 192.168.1.112
> (3) NAS-Port-Type = Ethernet
> (3) NAS-Port = 4
> (3) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> (3) Acct-Session-Id = "0500003F"
> (3) State = 0xa960c76dab64ca67c033c547c41b2362
> (3) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> (3) Calling-Station-Id = "28-00-AF-0F-A8-32"
> (3) EAP-Message = 0x020400060d00
> (3) Message-Authenticator = 0x038ead73ce4c8b0a455b6b5ffea2c726
> (3) Restoring &session-state
> (3) &session-state:Framed-MTU = 994
> (3) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
> 1.3 Handshake, ClientHello"
> (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, ServerHello"
> (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 ChangeCipherSpec"
> (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, EncryptedExtensions"
> (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, CertificateRequest"
> (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Certificate"
> (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, CertificateVerify"
> (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Finished"
> (3) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (3) authorize {
> (3) policy filter_username {
> (3) if (&User-Name) {
> (3) if (&User-Name) -> TRUE
> (3) if (&User-Name) {
> (3) if (&User-Name =~ / /) {
> (3) if (&User-Name =~ / /) -> FALSE
> (3) if (&User-Name =~ /@[^@]*@/ ) {
> (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (3) if (&User-Name =~ /\.\./ ) {
> (3) if (&User-Name =~ /\.\./ ) -> FALSE
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (3) if (&User-Name =~ /\.$/) {
> (3) if (&User-Name =~ /\.$/) -> FALSE
> (3) if (&User-Name =~ /@\./) {
> (3) if (&User-Name =~ /@\./) -> FALSE
> (3) } # if (&User-Name) = notfound
> (3) } # policy filter_username = notfound
> (3) [preprocess] = ok
> (3) [chap] = noop
> (3) [mschap] = noop
> (3) [digest] = noop
> (3) suffix: Checking for suffix after "@"
> (3) suffix: No '@' in User-Name =
> "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> (3) suffix: No such realm "NULL"
> (3) [suffix] = noop
> (3) eap: Peer sent EAP Response (code 2) ID 4 length 6
> (3) eap: No EAP Start, assuming it's an on-going EAP conversation
> (3) [eap] = updated
> (3) [files] = noop
> (3) [expiration] = noop
> (3) [logintime] = noop
> (3) [pap] = noop
> (3) } # authorize = updated
> (3) Found Auth-Type = eap
> (3) # Executing group from file /etc/freeradius/sites-enabled/default
> (3) authenticate {
> (3) eap: Removing EAP session with state 0xa960c76dab64ca67
> (3) eap: Previous EAP request found for state 0xa960c76dab64ca67,
> released from the list
> (3) eap: Peer sent packet with method EAP TLS (13)
> (3) eap: Calling submodule eap_tls to process data
> (3) eap_tls: (TLS) Peer ACKed our handshake fragment
> (3) eap: Sending EAP Request (code 1) ID 5 length 1000
> (3) eap: EAP session adding &reply:State = 0xa960c76daa65ca67
> (3) [eap] = handled
> (3) } # authenticate = handled
> (3) Using Post-Auth-Type Challenge
> (3) # Executing group from file /etc/freeradius/sites-enabled/default
> (3) Challenge { ... } # empty sub-section is ignored
> (3) session-state: Saving cached attributes
> (3) Framed-MTU = 994
> (3) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> ClientHello"
> (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> ServerHello"
> (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> EncryptedExtensions"
> (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateRequest"
> (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> Certificate"
> (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateVerify"
> (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> (3) Sent Access-Challenge Id 228 from 10.0.0.5:1812 to
> 185.241.224.187:35356 length 1064
> (3) EAP-Message =
> 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
> (3) Message-Authenticator = 0x00000000000000000000000000000000
> (3) State = 0xa960c76daa65ca67c033c547c41b2362
> (3) Finished request
> Waking up in 2.8 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 0.2 seconds.
> (0) Cleaning up request packet ID 225 with timestamp +1392 due to
> cleanup_delay was reached
> Waking up in 9.0 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 4.3 seconds.
> (4) Received Access-Request Id 229 from 185.241.224.187:35356 to
> 10.0.0.5:1812 length 173
> (4) NAS-IP-Address = 192.168.1.112
> (4) NAS-Port-Type = Ethernet
> (4) NAS-Port = 4
> (4) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> (4) Acct-Session-Id = "0500003F"
> (4) State = 0xa960c76daa65ca67c033c547c41b2362
> (4) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> (4) Calling-Station-Id = "28-00-AF-0F-A8-32"
> (4) EAP-Message = 0x020500060d00
> (4) Message-Authenticator = 0xd41b050c3a3def192db05fd631f14607
> (4) Restoring &session-state
> (4) &session-state:Framed-MTU = 994
> (4) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
> 1.3 Handshake, ClientHello"
> (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, ServerHello"
> (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 ChangeCipherSpec"
> (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, EncryptedExtensions"
> (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, CertificateRequest"
> (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Certificate"
> (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, CertificateVerify"
> (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Finished"
> (4) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (4) authorize {
> (4) policy filter_username {
> (4) if (&User-Name) {
> (4) if (&User-Name) -> TRUE
> (4) if (&User-Name) {
> (4) if (&User-Name =~ / /) {
> (4) if (&User-Name =~ / /) -> FALSE
> (4) if (&User-Name =~ /@[^@]*@/ ) {
> (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (4) if (&User-Name =~ /\.\./ ) {
> (4) if (&User-Name =~ /\.\./ ) -> FALSE
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (4) if (&User-Name =~ /\.$/) {
> (4) if (&User-Name =~ /\.$/) -> FALSE
> (4) if (&User-Name =~ /@\./) {
> (4) if (&User-Name =~ /@\./) -> FALSE
> (4) } # if (&User-Name) = notfound
> (4) } # policy filter_username = notfound
> (4) [preprocess] = ok
> (4) [chap] = noop
> (4) [mschap] = noop
> (4) [digest] = noop
> (4) suffix: Checking for suffix after "@"
> (4) suffix: No '@' in User-Name =
> "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> (4) suffix: No such realm "NULL"
> (4) [suffix] = noop
> (4) eap: Peer sent EAP Response (code 2) ID 5 length 6
> (4) eap: No EAP Start, assuming it's an on-going EAP conversation
> (4) [eap] = updated
> (4) [files] = noop
> (4) [expiration] = noop
> (4) [logintime] = noop
> (4) [pap] = noop
> (4) } # authorize = updated
> (4) Found Auth-Type = eap
> (4) # Executing group from file /etc/freeradius/sites-enabled/default
> (4) authenticate {
> (4) eap: Removing EAP session with state 0xa960c76daa65ca67
> (4) eap: Previous EAP request found for state 0xa960c76daa65ca67,
> released from the list
> (4) eap: Peer sent packet with method EAP TLS (13)
> (4) eap: Calling submodule eap_tls to process data
> (4) eap_tls: (TLS) Peer ACKed our handshake fragment
> (4) eap: Sending EAP Request (code 1) ID 6 length 1000
> (4) eap: EAP session adding &reply:State = 0xa960c76dad66ca67
> (4) [eap] = handled
> (4) } # authenticate = handled
> (4) Using Post-Auth-Type Challenge
> (4) # Executing group from file /etc/freeradius/sites-enabled/default
> (4) Challenge { ... } # empty sub-section is ignored
> (4) session-state: Saving cached attributes
> (4) Framed-MTU = 994
> (4) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> ClientHello"
> (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> ServerHello"
> (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> EncryptedExtensions"
> (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateRequest"
> (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> Certificate"
> (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateVerify"
> (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> (4) Sent Access-Challenge Id 229 from 10.0.0.5:1812 to
> 185.241.224.187:35356 length 1064
> (4) EAP-Message =
> 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
> (4) Message-Authenticator = 0x00000000000000000000000000000000
> (4) State = 0xa960c76dad66ca67c033c547c41b2362
> (4) Finished request
> Waking up in 2.8 seconds.
> (1) Cleaning up request packet ID 226 with timestamp +1401 due to
> cleanup_delay was reached
> Waking up in 9.0 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 8.3 seconds.
> ... new connection request on TCP socket
> Ignoring new connection due to client max_connections (16)
> Waking up in 3.3 seconds.
> (5) Received Access-Request Id 230 from 185.241.224.187:35356 to
> 10.0.0.5:1812 length 173
> (5) NAS-IP-Address = 192.168.1.112
> (5) NAS-Port-Type = Ethernet
> (5) NAS-Port = 4
> (5) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> (5) Acct-Session-Id = "0500003F"
> (5) State = 0xa960c76dad66ca67c033c547c41b2362
> (5) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> (5) Calling-Station-Id = "28-00-AF-0F-A8-32"
> (5) EAP-Message = 0x020600060d00
> (5) Message-Authenticator = 0x0dc4ca0033f30b31ea12f0a84c3615c3
> (5) Restoring &session-state
> (5) &session-state:Framed-MTU = 994
> (5) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
> 1.3 Handshake, ClientHello"
> (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, ServerHello"
> (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 ChangeCipherSpec"
> (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, EncryptedExtensions"
> (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, CertificateRequest"
> (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Certificate"
> (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, CertificateVerify"
> (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> 1.3 Handshake, Finished"
> (5) # Executing section authorize from file
> /etc/freeradius/sites-enabled/default
> (5) authorize {
> (5) policy filter_username {
> (5) if (&User-Name) {
> (5) if (&User-Name) -> TRUE
> (5) if (&User-Name) {
> (5) if (&User-Name =~ / /) {
> (5) if (&User-Name =~ / /) -> FALSE
> (5) if (&User-Name =~ /@[^@]*@/ ) {
> (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> (5) if (&User-Name =~ /\.\./ ) {
> (5) if (&User-Name =~ /\.\./ ) -> FALSE
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> -> FALSE
> (5) if (&User-Name =~ /\.$/) {
> (5) if (&User-Name =~ /\.$/) -> FALSE
> (5) if (&User-Name =~ /@\./) {
> (5) if (&User-Name =~ /@\./) -> FALSE
> (5) } # if (&User-Name) = notfound
> (5) } # policy filter_username = notfound
> (5) [preprocess] = ok
> (5) [chap] = noop
> (5) [mschap] = noop
> (5) [digest] = noop
> (5) suffix: Checking for suffix after "@"
> (5) suffix: No '@' in User-Name =
> "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> (5) suffix: No such realm "NULL"
> (5) [suffix] = noop
> (5) eap: Peer sent EAP Response (code 2) ID 6 length 6
> (5) eap: No EAP Start, assuming it's an on-going EAP conversation
> (5) [eap] = updated
> (5) [files] = noop
> (5) [expiration] = noop
> (5) [logintime] = noop
> (5) [pap] = noop
> (5) } # authorize = updated
> (5) Found Auth-Type = eap
> (5) # Executing group from file /etc/freeradius/sites-enabled/default
> (5) authenticate {
> (5) eap: Removing EAP session with state 0xa960c76dad66ca67
> (5) eap: Previous EAP request found for state 0xa960c76dad66ca67,
> released from the list
> (5) eap: Peer sent packet with method EAP TLS (13)
> (5) eap: Calling submodule eap_tls to process data
> (5) eap_tls: (TLS) Peer ACKed our handshake fragment
> (5) eap: Sending EAP Request (code 1) ID 7 length 109
> (5) eap: EAP session adding &reply:State = 0xa960c76dac67ca67
> (5) [eap] = handled
> (5) } # authenticate = handled
> (5) Using Post-Auth-Type Challenge
> (5) # Executing group from file /etc/freeradius/sites-enabled/default
> (5) Challenge { ... } # empty sub-section is ignored
> (5) session-state: Saving cached attributes
> (5) Framed-MTU = 994
> (5) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> ClientHello"
> (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> ServerHello"
> (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> EncryptedExtensions"
> (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateRequest"
> (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> Certificate"
> (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> CertificateVerify"
> (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> (5) Sent Access-Challenge Id 230 from 10.0.0.5:1812 to
> 185.241.224.187:35356 length 167
> (5) EAP-Message =
> 0x0107006d0d8000000fdbe33d32c6d71228255ebeafdd018899878a8fe0a80f886c4eb5170303004513e76f1ad52ae44957d10ac939c3d9a463013e536725fa716af274ae1ca18448ac2820e8abb26835729ebf1a1e0cca06c6553bba22f0249caa9e90802e54b60b89891323cb
> (5) Message-Authenticator = 0x00000000000000000000000000000000
> (5) State = 0xa960c76dac67ca67c033c547c41b2362
> (5) Finished request
> Waking up in 2.9 seconds.
> (2) Cleaning up request packet ID 227 with timestamp +1410 due to
> cleanup_delay was reached
> Ready to process requests
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list