Timeout and TLS handshake
Sam Hutchings
samhutchings1415 at gmail.com
Thu Apr 3 19:20:19 UTC 2025
Thank you for the advice.
I have flagged this with Azure support and we are currently in
discussions with enabling 'enable-udp-fragment-reordering'.
Ideally, we would not want to fragment UDP packets but as we are using
EAP, this seems to be expected. However, we are currently including
the root CA currently in the certificate_file variable in eap, which
as per the docs we should remove this to reduce the data exchange
during TLS negotiation. Therefore, I will test again without the root
CA cert, to see if we have a higher success rate.
Thanks again,
Sam
On Wed, Apr 2, 2025 at 1:54 AM George Benjin <george.benjin at gmail.com> wrote:
>
> I haven't run up FreeRADIUS in ACA or ACI but suspect it might be due
> to this: https://lists.freeradius.org/pipermail/freeradius-users/2024-September/104753.html
>
> >>>
>
> You need to be very careful running a RADIUS server in Azure if you're
> using RADIUS/UDP.
>
> Azure has a network security feature on by default that drops
> fragmented UDP packets that arrive out of order. This negatively
> impacts RADIUS/UDP traffic.
>
> To give you an example, at least 20% of EAP-TLS auth attempts were
> failing for us in the cert auth phase due to this issue.
>
> Azure support can turn on the 'enable-udp-fragment-reordering' feature
> by request after providing packet captures and use case info etc. They
> will also only turn it on in a brand new subscription that's dedicated
> to running VMs that require this feature. After we did this, our auth
> success rate increased to 100%.
>
>
> Another thing to be wary of is setting 'tls_max_version' to 1.3.
> Windows 11 supports TLS 1.3 by default for EAP-TLS etc but does not
> yet support session resumption when using this protocol (see
> https://learn.microsoft.com/en-us/windows-server/networking/technologies/extensible-authentication-protocol/windows-11-changes).
> It's worth dropping the Max version to 1.2.
>
> >>>
>
> Try implementing RadSec if your equipment supports it.
>
> On Wed, 2 Apr 2025 at 01:47, Sam Hutchings <samhutchings1415 at gmail.com> wrote:
> >
> > Hi,
> >
> > Please can you advise why the connection is not succeeding?
> >
> > The Problem:
> > A Windows client is not succeeding authentication and the debug does
> > not show that the TLS handshake completes over WAN; the server is
> > hosted in Azure Container Instance. I have tested the same container
> > locally on the LAN which is working OK (docker container running on a
> > VM with a separate laptop with 802.1x configured with a switch set as
> > the NAC).
> >
> > I can see the TLS handshake when comparing to a working example seems
> > to be missing the below:
> >
> > (6) &session-state:TLS-Session-Cipher-Suite = "TLS_AES_256_GCM_SHA384"
> > (6) &session-state:TLS-Session-Version = "TLS 1.3"
> > (6) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Finished"
> >
> > What you are trying to do: Authenticate a Windows client via 802.1X
> > with EAP-TLS over the internet to an Azure Container Instance running
> > freeRADIUS.
> >
> > This is behind a load balancer with a public IP, which includes a
> > health check on port 8080. This works when using eapol_test but not
> > when using Windows authentication. Although, this works for both
> > Windows and eapol_test when running the container on the local
> > network.
> >
> > why you are trying to do it: Understand why this fails the TLS
> > handshake over the internet.
> >
> > what you expect the server to do: TLS handshake to complete and
> > authentication request to receive an Access-Accept
> >
> > what the server does instead (i.e. debug output):
> >
> > FreeRADIUS Version 3.2.7
> > Copyright (C) 1999-2023 The FreeRADIUS server project and contributors
> > There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
> > PARTICULAR PURPOSE
> > You may redistribute copies of FreeRADIUS under the terms of the
> > GNU General Public License
> > For more information about these matters, see the file named COPYRIGHT
> > Starting - reading configuration files ...
> > including dictionary file /usr/share/freeradius/dictionary
> > including dictionary file /usr/share/freeradius/dictionary.dhcp
> > including dictionary file /usr/share/freeradius/dictionary.vqp
> > including dictionary file /etc/freeradius/dictionary
> > including configuration file /etc/freeradius/radiusd.conf
> > including configuration file /etc/freeradius/proxy.conf
> > including configuration file /etc/freeradius/clients.conf
> > including files in directory /etc/freeradius/mods-enabled/
> > including configuration file /etc/freeradius/mods-enabled/always
> > including configuration file /etc/freeradius/mods-enabled/attr_filter
> > including configuration file /etc/freeradius/mods-enabled/chap
> > including configuration file /etc/freeradius/mods-enabled/date
> > including configuration file /etc/freeradius/mods-enabled/detail
> > including configuration file /etc/freeradius/mods-enabled/detail.log
> > including configuration file /etc/freeradius/mods-enabled/digest
> > including configuration file /etc/freeradius/mods-enabled/dynamic_clients
> > including configuration file /etc/freeradius/mods-enabled/eap
> > including configuration file /etc/freeradius/mods-enabled/echo
> > including configuration file /etc/freeradius/mods-enabled/exec
> > including configuration file /etc/freeradius/mods-enabled/expiration
> > including configuration file /etc/freeradius/mods-enabled/expr
> > including configuration file /etc/freeradius/mods-enabled/files
> > including configuration file /etc/freeradius/mods-enabled/linelog
> > including configuration file /etc/freeradius/mods-enabled/logintime
> > including configuration file /etc/freeradius/mods-enabled/mschap
> > including configuration file /etc/freeradius/mods-enabled/ntlm_auth
> > including configuration file /etc/freeradius/mods-enabled/pap
> > including configuration file /etc/freeradius/mods-enabled/passwd
> > including configuration file /etc/freeradius/mods-enabled/preprocess
> > including configuration file /etc/freeradius/mods-enabled/proxy_rate_limit
> > including configuration file /etc/freeradius/mods-enabled/radutmp
> > including configuration file /etc/freeradius/mods-enabled/realm
> > including configuration file /etc/freeradius/mods-enabled/replicate
> > including configuration file /etc/freeradius/mods-enabled/soh
> > including configuration file /etc/freeradius/mods-enabled/sradutmp
> > including configuration file /etc/freeradius/mods-enabled/totp
> > including configuration file /etc/freeradius/mods-enabled/unix
> > including configuration file /etc/freeradius/mods-enabled/unpack
> > including configuration file /etc/freeradius/mods-enabled/utf8
> > including files in directory /etc/freeradius/policy.d/
> > including configuration file /etc/freeradius/policy.d/abfab-tr
> > including configuration file /etc/freeradius/policy.d/accounting
> > including configuration file /etc/freeradius/policy.d/canonicalization
> > including configuration file /etc/freeradius/policy.d/control
> > including configuration file /etc/freeradius/policy.d/cui
> > including configuration file /etc/freeradius/policy.d/debug
> > including configuration file /etc/freeradius/policy.d/dhcp
> > including configuration file /etc/freeradius/policy.d/eap
> > including configuration file /etc/freeradius/policy.d/filter
> > including configuration file /etc/freeradius/policy.d/moonshot-targeted-ids
> > including configuration file /etc/freeradius/policy.d/operator-name
> > including configuration file /etc/freeradius/policy.d/rfc7542
> > including files in directory /etc/freeradius/sites-enabled/
> > including configuration file /etc/freeradius/sites-enabled/default
> > including configuration file /etc/freeradius/sites-enabled/inner-tunnel
> > including configuration file /etc/freeradius/sites-enabled/check-eap-tls
> > including configuration file /etc/freeradius/sites-enabled/status
> > main {
> > security {
> > allow_core_dumps = no
> > }
> > name = "radiusd"
> > prefix = "@prefix@"
> > localstatedir = "@localstatedir@"
> > logdir = "@logdir@"
> > run_dir = "@localstatedir@/run/radiusd"
> > }
> > main {
> > name = "radiusd"
> > prefix = "@prefix@"
> > localstatedir = "@localstatedir@"
> > sbindir = "@sbindir@"
> > logdir = "@logdir@"
> > run_dir = "@localstatedir@/run/radiusd"
> > libdir = "@libdir@"
> > radacctdir = "@radacctdir@"
> > hostname_lookups = no
> > max_request_time = 30
> > proxy_dedup_window = 1
> > cleanup_delay = 30
> > max_requests = 16384
> > max_fds = 512
> > postauth_client_lost = no
> > pidfile = "@localstatedir@/run/radiusd/radiusd.pid"
> > checkrad = "@sbindir@/checkrad"
> > debug_level = 0
> > proxy_requests = yes
> > log {
> > stripped_names = no
> > auth = no
> > auth_badpass = no
> > auth_goodpass = no
> > colourise = yes
> > msg_denied = "You are already logged in - access denied"
> > }
> > resources {
> > }
> > security {
> > max_attributes = 200
> > reject_delay = 1.000000
> > status_server = yes
> > require_message_authenticator = "auto"
> > limit_proxy_state = "auto"
> > }
> > unlang {
> > group_stop_return = no
> > policy_stop_return = no
> > }
> > }
> > radiusd: #### Loading Realms and Home Servers ####
> > proxy server {
> > retry_delay = 5
> > retry_count = 3
> > default_fallback = no
> > dead_time = 120
> > wake_all_if_all_dead = no
> > }
> > home_server localhost {
> > nonblock = no
> > ipaddr = 127.0.0.1
> > port = 1812
> > type = "auth"
> > secret = <<< secret >>>
> > response_window = 20.000000
> > response_timeouts = 1
> > max_outstanding = 65536
> > zombie_period = 40
> > status_check = "status-server"
> > ping_interval = 30
> > check_interval = 30
> > check_timeout = 4
> > num_answers_to_alive = 3
> > revive_interval = 120
> > limit {
> > max_connections = 16
> > max_requests = 0
> > lifetime = 0
> > idle_timeout = 0
> > }
> > coa {
> > irt = 2
> > mrt = 16
> > mrc = 5
> > mrd = 30
> > }
> > }
> > home_server_pool my_auth_failover {
> > type = fail-over
> > home_server = localhost
> > }
> > realm example.com {
> > auth_pool = my_auth_failover
> > }
> > realm LOCAL {
> > }
> > radiusd: #### Loading Clients ####
> > client localhost {
> > ipaddr = 127.0.0.1
> > require_message_authenticator = "auto"
> > limit_proxy_state = "auto"
> > secret = <<< secret >>>
> > proto = "*"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > Shared secret for client localhost is short, and likely can be broken
> > by an attacker.
> > client localhost_ipv6 {
> > ipv6addr = ::1
> > secret = <<< secret >>>
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > Shared secret for client localhost_ipv6 is short, and likely can be
> > broken by an attacker.
> > client radiustesting {
> > ipaddr = 185.241.224.187
> > secret = <<< secret >>>
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > Debug state unknown (cap_sys_ptrace capability not set)
> > Configuration version: 7161-5ad1-6c77-638f
> > systemd watchdog is disabled
> > # Creating Auth-Type = mschap
> > # Creating Auth-Type = digest
> > # Creating Auth-Type = eap
> > # Creating Auth-Type = PAP
> > # Creating Auth-Type = CHAP
> > # Creating Auth-Type = MS-CHAP
> > # Creating Autz-Type = New-TLS-Connection
> > # Creating Autz-Type = Status-Server
> > radiusd: #### Instantiating modules ####
> > modules {
> > # Loaded module rlm_always
> > # Loading module "reject" from file /etc/freeradius/mods-enabled/always
> > always reject {
> > rcode = "reject"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "fail" from file /etc/freeradius/mods-enabled/always
> > always fail {
> > rcode = "fail"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "ok" from file /etc/freeradius/mods-enabled/always
> > always ok {
> > rcode = "ok"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "handled" from file /etc/freeradius/mods-enabled/always
> > always handled {
> > rcode = "handled"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "invalid" from file /etc/freeradius/mods-enabled/always
> > always invalid {
> > rcode = "invalid"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "userlock" from file /etc/freeradius/mods-enabled/always
> > always userlock {
> > rcode = "userlock"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "notfound" from file /etc/freeradius/mods-enabled/always
> > always notfound {
> > rcode = "notfound"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "noop" from file /etc/freeradius/mods-enabled/always
> > always noop {
> > rcode = "noop"
> > simulcount = 0
> > mpp = no
> > }
> > # Loading module "updated" from file /etc/freeradius/mods-enabled/always
> > always updated {
> > rcode = "updated"
> > simulcount = 0
> > mpp = no
> > }
> > # Loaded module rlm_attr_filter
> > # Loading module "attr_filter.post-proxy" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > attr_filter attr_filter.post-proxy {
> > filename = "/etc/freeradius/mods-config/attr_filter/post-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.pre-proxy" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > attr_filter attr_filter.pre-proxy {
> > filename = "/etc/freeradius/mods-config/attr_filter/pre-proxy"
> > key = "%{Realm}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_reject" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > attr_filter attr_filter.access_reject {
> > filename = "/etc/freeradius/mods-config/attr_filter/access_reject"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.access_challenge" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > attr_filter attr_filter.access_challenge {
> > filename = "/etc/freeradius/mods-config/attr_filter/access_challenge"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.accounting_response" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > attr_filter attr_filter.accounting_response {
> > filename =
> > "/etc/freeradius/mods-config/attr_filter/accounting_response"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loading module "attr_filter.coa" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > attr_filter attr_filter.coa {
> > filename = "/etc/freeradius/mods-config/attr_filter/coa"
> > key = "%{User-Name}"
> > relaxed = no
> > }
> > # Loaded module rlm_chap
> > # Loading module "chap" from file /etc/freeradius/mods-enabled/chap
> > # Loaded module rlm_date
> > # Loading module "date" from file /etc/freeradius/mods-enabled/date
> > date {
> > format = "%b %e %Y %H:%M:%S %Z"
> > utc = no
> > }
> > # Loading module "wispr2date" from file /etc/freeradius/mods-enabled/date
> > date wispr2date {
> > format = "%Y-%m-%dT%H:%M:%S"
> > utc = no
> > }
> > # Loaded module rlm_detail
> > # Loading module "detail" from file /etc/freeradius/mods-enabled/detail
> > detail {
> > filename =
> > "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > dates_as_integer = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "auth_log" from file /etc/freeradius/mods-enabled/detail.log
> > detail auth_log {
> > filename =
> > "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > dates_as_integer = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "reply_log" from file /etc/freeradius/mods-enabled/detail.log
> > detail reply_log {
> > filename =
> > "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > dates_as_integer = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "pre_proxy_log" from file
> > /etc/freeradius/mods-enabled/detail.log
> > detail pre_proxy_log {
> > filename =
> > "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > dates_as_integer = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loading module "post_proxy_log" from file
> > /etc/freeradius/mods-enabled/detail.log
> > detail post_proxy_log {
> > filename =
> > "@radacctdir@/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
> > header = "%t"
> > permissions = 384
> > locking = no
> > dates_as_integer = no
> > escape_filenames = no
> > log_packet_header = no
> > }
> > # Loaded module rlm_digest
> > # Loading module "digest" from file /etc/freeradius/mods-enabled/digest
> > # Loaded module rlm_dynamic_clients
> > # Loading module "dynamic_clients" from file
> > /etc/freeradius/mods-enabled/dynamic_clients
> > # Loaded module rlm_eap
> > # Loading module "eap" from file /etc/freeradius/mods-enabled/eap
> > eap {
> > default_eap_type = "tls"
> > timer_expire = 60
> > max_eap_type = 52
> > ignore_unknown_eap_types = no
> > cisco_accounting_username_bug = no
> > max_sessions = 16384
> > dedup_key = "%{Calling-Station-Id}"
> > }
> > # Loaded module rlm_exec
> > # Loading module "echo" from file /etc/freeradius/mods-enabled/echo
> > exec echo {
> > wait = yes
> > program = "/bin/echo %{User-Name}"
> > input_pairs = "request"
> > output_pairs = "reply"
> > shell_escape = yes
> > }
> > # Loading module "exec" from file /etc/freeradius/mods-enabled/exec
> > exec {
> > wait = no
> > input_pairs = "request"
> > shell_escape = yes
> > timeout = 10
> > }
> > # Loaded module rlm_expiration
> > # Loading module "expiration" from file
> > /etc/freeradius/mods-enabled/expiration
> > # Loaded module rlm_expr
> > # Loading module "expr" from file /etc/freeradius/mods-enabled/expr
> > expr {
> > safe_characters =
> > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
> > /äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
> > }
> > # Loaded module rlm_files
> > # Loading module "files" from file /etc/freeradius/mods-enabled/files
> > files {
> > filename = "/etc/freeradius/mods-config/files/authorize"
> > acctusersfile = "/etc/freeradius/mods-config/files/accounting"
> > preproxy_usersfile = "/etc/freeradius/mods-config/files/pre-proxy"
> > }
> > # Loaded module rlm_linelog
> > # Loading module "linelog" from file /etc/freeradius/mods-enabled/linelog
> > linelog {
> > filename = "@logdir@/linelog"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = "This is a log message for %{User-Name}"
> > reference = "messages.%{%{reply:Packet-Type}:-default}"
> > }
> > # Loading module "log_accounting" from file
> > /etc/freeradius/mods-enabled/linelog
> > linelog log_accounting {
> > filename = "@logdir@/linelog-accounting"
> > escape_filenames = no
> > syslog_severity = "info"
> > permissions = 384
> > format = ""
> > reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
> > }
> > # Loaded module rlm_logintime
> > # Loading module "logintime" from file /etc/freeradius/mods-enabled/logintime
> > logintime {
> > minimum_timeout = 60
> > }
> > # Loaded module rlm_mschap
> > # Loading module "mschap" from file /etc/freeradius/mods-enabled/mschap
> > mschap {
> > use_mppe = yes
> > require_encryption = no
> > require_strong = no
> > with_ntdomain_hack = yes
> > passchange {
> > }
> > allow_retry = yes
> > winbind_retry_with_normalised_username = no
> > }
> > # Loading module "ntlm_auth" from file /etc/freeradius/mods-enabled/ntlm_auth
> > exec ntlm_auth {
> > wait = yes
> > program = "/path/to/ntlm_auth --request-nt-key
> > --domain=MYDOMAIN --username=%{mschap:User-Name}
> > --password=%{User-Password}"
> > shell_escape = yes
> > }
> > # Loaded module rlm_pap
> > # Loading module "pap" from file /etc/freeradius/mods-enabled/pap
> > pap {
> > normalise = yes
> > }
> > # Loaded module rlm_passwd
> > # Loading module "etc_passwd" from file /etc/freeradius/mods-enabled/passwd
> > passwd etc_passwd {
> > filename = "/etc/passwd"
> > format = "*User-Name:Crypt-Password:"
> > delimiter = ":"
> > ignore_nislike = no
> > ignore_empty = yes
> > allow_multiple_keys = no
> > hash_size = 100
> > }
> > # Loaded module rlm_preprocess
> > # Loading module "preprocess" from file
> > /etc/freeradius/mods-enabled/preprocess
> > preprocess {
> > huntgroups = "/etc/freeradius/mods-config/preprocess/huntgroups"
> > hints = "/etc/freeradius/mods-config/preprocess/hints"
> > with_ascend_hack = no
> > ascend_channels_per_line = 23
> > with_ntdomain_hack = no
> > with_specialix_jetstream_hack = no
> > with_cisco_vsa_hack = no
> > with_alvarion_vsa_hack = no
> > }
> > # Loaded module rlm_proxy_rate_limit
> > # Loading module "proxy_rate_limit" from file
> > /etc/freeradius/mods-enabled/proxy_rate_limit
> > proxy_rate_limit {
> > max_entries = 2048
> > idle_timeout = 10
> > num_subtables = 256
> > window = 1
> > }
> > # Loaded module rlm_radutmp
> > # Loading module "radutmp" from file /etc/freeradius/mods-enabled/radutmp
> > radutmp {
> > filename = "@logdir@/radutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 384
> > caller_id = yes
> > }
> > # Loaded module rlm_realm
> > # Loading module "IPASS" from file /etc/freeradius/mods-enabled/realm
> > realm IPASS {
> > format = "prefix"
> > delimiter = "/"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "suffix" from file /etc/freeradius/mods-enabled/realm
> > realm suffix {
> > format = "suffix"
> > delimiter = "@"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "bangpath" from file /etc/freeradius/mods-enabled/realm
> > realm bangpath {
> > format = "prefix"
> > delimiter = "!"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "realmpercent" from file /etc/freeradius/mods-enabled/realm
> > realm realmpercent {
> > format = "suffix"
> > delimiter = "%"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loading module "ntdomain" from file /etc/freeradius/mods-enabled/realm
> > realm ntdomain {
> > format = "prefix"
> > delimiter = "\"
> > ignore_default = no
> > ignore_null = no
> > }
> > # Loaded module rlm_replicate
> > # Loading module "replicate" from file /etc/freeradius/mods-enabled/replicate
> > # Loaded module rlm_soh
> > # Loading module "soh" from file /etc/freeradius/mods-enabled/soh
> > soh {
> > dhcp = yes
> > }
> > # Loading module "sradutmp" from file /etc/freeradius/mods-enabled/sradutmp
> > radutmp sradutmp {
> > filename = "@logdir@/sradutmp"
> > username = "%{User-Name}"
> > case_sensitive = yes
> > check_with_nas = yes
> > permissions = 420
> > caller_id = no
> > }
> > # Loaded module rlm_totp
> > # Loading module "totp" from file /etc/freeradius/mods-enabled/totp
> > totp {
> > time_step = 30
> > otp_length = 6
> > lookback_steps = 1
> > lookback_interval = 30
> > lookforward_steps = 0
> > }
> > # Loaded module rlm_unix
> > # Loading module "unix" from file /etc/freeradius/mods-enabled/unix
> > unix {
> > radwtmp = "@logdir@/radwtmp"
> > }
> > Creating attribute Unix-Group
> > # Loaded module rlm_unpack
> > # Loading module "unpack" from file /etc/freeradius/mods-enabled/unpack
> > # Loaded module rlm_utf8
> > # Loading module "utf8" from file /etc/freeradius/mods-enabled/utf8
> > instantiate {
> > }
> > # Instantiating module "reject" from file /etc/freeradius/mods-enabled/always
> > # Instantiating module "fail" from file /etc/freeradius/mods-enabled/always
> > # Instantiating module "ok" from file /etc/freeradius/mods-enabled/always
> > # Instantiating module "handled" from file /etc/freeradius/mods-enabled/always
> > # Instantiating module "invalid" from file /etc/freeradius/mods-enabled/always
> > # Instantiating module "userlock" from file
> > /etc/freeradius/mods-enabled/always
> > # Instantiating module "notfound" from file
> > /etc/freeradius/mods-enabled/always
> > # Instantiating module "noop" from file /etc/freeradius/mods-enabled/always
> > # Instantiating module "updated" from file /etc/freeradius/mods-enabled/always
> > # Instantiating module "attr_filter.post-proxy" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/mods-config/attr_filter/post-proxy
> > # Instantiating module "attr_filter.pre-proxy" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/mods-config/attr_filter/pre-proxy
> > # Instantiating module "attr_filter.access_reject" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/mods-config/attr_filter/access_reject
> > # Instantiating module "attr_filter.access_challenge" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/mods-config/attr_filter/access_challenge
> > # Instantiating module "attr_filter.accounting_response" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > reading pairlist file
> > /etc/freeradius/mods-config/attr_filter/accounting_response
> > # Instantiating module "attr_filter.coa" from file
> > /etc/freeradius/mods-enabled/attr_filter
> > reading pairlist file /etc/freeradius/mods-config/attr_filter/coa
> > # Instantiating module "detail" from file /etc/freeradius/mods-enabled/detail
> > # Instantiating module "auth_log" from file
> > /etc/freeradius/mods-enabled/detail.log
> > rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
> > detail output
> > # Instantiating module "reply_log" from file
> > /etc/freeradius/mods-enabled/detail.log
> > # Instantiating module "pre_proxy_log" from file
> > /etc/freeradius/mods-enabled/detail.log
> > # Instantiating module "post_proxy_log" from file
> > /etc/freeradius/mods-enabled/detail.log
> > /etc/freeradius/mods-enabled/eap[56]: Found dynamic expansion in
> > string which will not be dynamically expanded
> > # Instantiating module "eap" from file /etc/freeradius/mods-enabled/eap
> > # Linked to sub-module rlm_eap_md5
> > # Linked to sub-module rlm_eap_gtc
> > gtc {
> > challenge = "Password: "
> > auth_type = "PAP"
> > }
> > # Linked to sub-module rlm_eap_tls
> > tls {
> > tls = "tls-common"
> > virtual_server = "check-eap-tls"
> > }
> > tls-config tls-common {
> > verify_depth = 0
> > ca_path = "/etc/freeradius/certs"
> > pem_file_type = yes
> > private_key_file = "/etc/freeradius/certs/server.pem"
> > certificate_file = "/etc/freeradius/certs/server.pem"
> > ca_file = "/etc/freeradius/certs/ca.pem"
> > private_key_password = <<< secret >>>
> > fragment_size = 1024
> > include_length = yes
> > auto_chain = yes
> > check_crl = no
> > check_all_crl = no
> > ca_path_reload_interval = 0
> > cipher_list = "DEFAULT"
> > cipher_server_preference = no
> > reject_unknown_intermediate_ca = no
> > ecdh_curve = ""
> > tls_max_version = "1.3"
> > tls_min_version = "1.2"
> > cache {
> > enable = no
> > lifetime = 24
> > max_entries = 255
> > }
> > verify {
> > skip_if_ocsp_ok = no
> > }
> > ocsp {
> > enable = no
> > override_cert_url = yes
> > url = "http://127.0.0.1/ocsp/"
> > use_nonce = yes
> > timeout = 0
> > softfail = no
> > }
> > }
> > # Linked to sub-module rlm_eap_ttls
> > ttls {
> > tls = "tls-common"
> > default_eap_type = "md5"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > virtual_server = "inner-tunnel"
> > include_length = yes
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_peap
> > peap {
> > tls = "tls-common"
> > default_eap_type = "mschapv2"
> > copy_request_to_tunnel = no
> > use_tunneled_reply = no
> > proxy_tunneled_request_as_eap = yes
> > virtual_server = "inner-tunnel"
> > soh = no
> > require_client_cert = no
> > }
> > tls: Using cached TLS configuration from previous invocation
> > # Linked to sub-module rlm_eap_mschapv2
> > mschapv2 {
> > with_ntdomain_hack = no
> > send_error = no
> > }
> > # Instantiating module "expiration" from file
> > /etc/freeradius/mods-enabled/expiration
> > # Instantiating module "files" from file /etc/freeradius/mods-enabled/files
> > reading pairlist file /etc/freeradius/mods-config/files/authorize
> > reading pairlist file /etc/freeradius/mods-config/files/accounting
> > reading pairlist file /etc/freeradius/mods-config/files/pre-proxy
> > # Instantiating module "linelog" from file
> > /etc/freeradius/mods-enabled/linelog
> > # Instantiating module "log_accounting" from file
> > /etc/freeradius/mods-enabled/linelog
> > # Instantiating module "logintime" from file
> > /etc/freeradius/mods-enabled/logintime
> > # Instantiating module "mschap" from file /etc/freeradius/mods-enabled/mschap
> > rlm_mschap (mschap): using internal authentication
> > # Instantiating module "pap" from file /etc/freeradius/mods-enabled/pap
> > # Instantiating module "etc_passwd" from file
> > /etc/freeradius/mods-enabled/passwd
> > rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
> > # Instantiating module "preprocess" from file
> > /etc/freeradius/mods-enabled/preprocess
> > reading pairlist file /etc/freeradius/mods-config/preprocess/huntgroups
> > reading pairlist file /etc/freeradius/mods-config/preprocess/hints
> > # Instantiating module "proxy_rate_limit" from file
> > /etc/freeradius/mods-enabled/proxy_rate_limit
> > # Instantiating module "IPASS" from file /etc/freeradius/mods-enabled/realm
> > # Instantiating module "suffix" from file /etc/freeradius/mods-enabled/realm
> > # Instantiating module "bangpath" from file /etc/freeradius/mods-enabled/realm
> > # Instantiating module "realmpercent" from file
> > /etc/freeradius/mods-enabled/realm
> > # Instantiating module "ntdomain" from file /etc/freeradius/mods-enabled/realm
> > # Instantiating module "totp" from file /etc/freeradius/mods-enabled/totp
> > } # modules
> > radiusd: #### Loading Virtual Servers ####
> > server { # from file /etc/freeradius/radiusd.conf
> > } # server
> > server default { # from file /etc/freeradius/sites-enabled/default
> > # Loading authenticate {...}
> > Compiling Auth-Type PAP for attr Auth-Type
> > Compiling Auth-Type CHAP for attr Auth-Type
> > Compiling Auth-Type MS-CHAP for attr Auth-Type
> > # Loading authorize {...}
> > Ignoring "sql" (see raddb/mods-available/README.rst)
> > Ignoring "ldap" (see raddb/mods-available/README.rst)
> > Compiling Autz-Type New-TLS-Connection for attr Autz-Type
> > # Loading preacct {...}
> > # Loading accounting {...}
> > # Loading post-auth {...}
> > Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> > Compiling Post-Auth-Type Challenge for attr Post-Auth-Type
> > Compiling Post-Auth-Type Client-Lost for attr Post-Auth-Type
> > } # server default
> > server inner-tunnel { # from file /etc/freeradius/sites-enabled/inner-tunnel
> > # Loading authenticate {...}
> > Compiling Auth-Type PAP for attr Auth-Type
> > Compiling Auth-Type CHAP for attr Auth-Type
> > Compiling Auth-Type MS-CHAP for attr Auth-Type
> > # Loading authorize {...}
> > # Loading post-proxy {...}
> > # Loading post-auth {...}
> > # Skipping contents of 'if' as it is always 'false' --
> > /etc/freeradius/sites-enabled/inner-tunnel:366
> > Compiling Post-Auth-Type REJECT for attr Post-Auth-Type
> > } # server inner-tunnel
> > server check-eap-tls { # from file /etc/freeradius/sites-enabled/check-eap-tls
> > # Loading authorize {...}
> > } # server check-eap-tls
> > server status { # from file /etc/freeradius/sites-enabled/status
> > # Loading authorize {...}
> > Compiling Autz-Type Status-Server for attr Autz-Type
> > } # server status
> > radiusd: #### Opening IP addresses and Ports ####
> > listen {
> > type = "auth"
> > ipaddr = *
> > port = 0
> > limit {
> > max_connections = 128
> > lifetime = 30
> > idle_timeout = 60
> > }
> > Setting idle_timeout to 0
> > }
> > listen {
> > type = "acct"
> > ipaddr = *
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "auth"
> > ipv6addr = ::
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "acct"
> > ipv6addr = ::
> > port = 0
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > listen {
> > type = "auth"
> > ipaddr = 127.0.0.1
> > port = 18120
> > }
> > listen {
> > type = "status"
> > ipaddr = *
> > port = 8080
> > proto = "tcp"
> > limit {
> > max_connections = 64
> > lifetime = 15
> > idle_timeout = 30
> > }
> > Setting idle_timeout to 0
> > clients = "azure_lb"
> > client azure_lb {
> > ipaddr = 168.63.129.16
> > secret = <<< secret >>>
> > proto = "tcp"
> > limit {
> > max_connections = 16
> > lifetime = 0
> > idle_timeout = 30
> > }
> > }
> > }
> > Listening on auth address * port 1812 bound to server default
> > Listening on acct address * port 1813 bound to server default
> > Listening on auth address :: port 1812 bound to server default
> > Listening on acct address :: port 1813 bound to server default
> > Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel
> > Listening on status proto tcp address * port 8080 bound to server status
> > Listening on proxy address * port 47097
> > Listening on proxy address :: port 33982
> > Ready to process requests
> > ... new connection request on TCP socket
> > Listening on status from client (168.63.129.16, 54790) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.8 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 54790) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 54858) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.8 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 54858) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 54946) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.8 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 54946) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55023) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.8 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55023) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55116) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.8 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55116) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55188) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.8 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55188) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55271) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.8 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55271) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55341) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55341) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55411) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55411) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55486) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55486) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55575) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55575) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55631) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55631) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55721) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55721) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55790) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55790) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 55987) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 55987) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Failed inserting TCP socket into parent list.
> > Listening on status from client (168.63.129.16, 56081) -> (*, 8080,
> > virtual-server=status)
> > Waking up in 0.7 seconds.
> > Waking up in 14.4 seconds.
> > Client has closed connection
> > ... shutting down socket status from client (168.63.129.16, 56081) ->
> > (*, 8080, virtual-server=status)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Ready to process requests
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Ready to process requests
> > (0) Received Access-Request Id 225 from 185.241.224.187:35356 to
> > 10.0.0.5:1812 length 195
> > (0) NAS-IP-Address = 192.168.1.112
> > (0) NAS-Port-Type = Ethernet
> > (0) NAS-Port = 4
> > (0) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> > (0) Acct-Session-Id = "0500003F"
> > (0) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> > (0) Calling-Station-Id = "28-00-AF-0F-A8-32"
> > (0) EAP-Message =
> > 0x0201002e01686f73742f33353365633031342d356337302d346534632d613763382d623963386235383630333532
> > (0) Message-Authenticator = 0xfd9f875e95feb822675be4ee23747c02
> > (0) # Executing section authorize from file
> > /etc/freeradius/sites-enabled/default
> > (0) authorize {
> > (0) policy filter_username {
> > (0) if (&User-Name) {
> > (0) if (&User-Name) -> TRUE
> > (0) if (&User-Name) {
> > (0) if (&User-Name =~ / /) {
> > (0) if (&User-Name =~ / /) -> FALSE
> > (0) if (&User-Name =~ /@[^@]*@/ ) {
> > (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > (0) if (&User-Name =~ /\.\./ ) {
> > (0) if (&User-Name =~ /\.\./ ) -> FALSE
> > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> > (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> > -> FALSE
> > (0) if (&User-Name =~ /\.$/) {
> > (0) if (&User-Name =~ /\.$/) -> FALSE
> > (0) if (&User-Name =~ /@\./) {
> > (0) if (&User-Name =~ /@\./) -> FALSE
> > (0) } # if (&User-Name) = notfound
> > (0) } # policy filter_username = notfound
> > (0) [preprocess] = ok
> > (0) [chap] = noop
> > (0) [mschap] = noop
> > (0) [digest] = noop
> > (0) suffix: Checking for suffix after "@"
> > (0) suffix: No '@' in User-Name =
> > "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> > (0) suffix: No such realm "NULL"
> > (0) [suffix] = noop
> > (0) eap: Peer sent EAP Response (code 2) ID 1 length 46
> > (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit
> > the rest of authorize
> > (0) [eap] = ok
> > (0) } # authorize = ok
> > (0) Found Auth-Type = eap
> > (0) # Executing group from file /etc/freeradius/sites-enabled/default
> > (0) authenticate {
> > (0) eap: EXPAND %{Calling-Station-Id}
> > (0) eap: --> 28-00-AF-0F-A8-32
> > (0) eap: Peer sent packet with method EAP Identity (1)
> > (0) eap: Using default_eap_type = TLS
> > (0) eap: Calling submodule eap_tls to process data
> > (0) eap_tls: (TLS) TLS -Initiating new session
> > (0) eap_tls: (TLS) TLS - Setting verify mode to require certificate from client
> > (0) eap: Sending EAP Request (code 1) ID 2 length 6
> > (0) eap: EAP session adding &reply:State = 0xa960c76da962ca67
> > (0) [eap] = handled
> > (0) } # authenticate = handled
> > (0) Using Post-Auth-Type Challenge
> > (0) # Executing group from file /etc/freeradius/sites-enabled/default
> > (0) Challenge { ... } # empty sub-section is ignored
> > (0) session-state: Saving cached attributes
> > (0) Framed-MTU = 994
> > (0) Sent Access-Challenge Id 225 from 10.0.0.5:1812 to
> > 185.241.224.187:35356 length 64
> > (0) EAP-Message = 0x010200060d20
> > (0) Message-Authenticator = 0x00000000000000000000000000000000
> > (0) State = 0xa960c76da962ca67c033c547c41b2362
> > (0) Finished request
> > Waking up in 29.9 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 25.3 seconds.
> > (1) Received Access-Request Id 226 from 185.241.224.187:35356 to
> > 10.0.0.5:1812 length 436
> > (1) NAS-IP-Address = 192.168.1.112
> > (1) NAS-Port-Type = Ethernet
> > (1) NAS-Port = 4
> > (1) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> > (1) Acct-Session-Id = "0500003F"
> > (1) State = 0xa960c76da962ca67c033c547c41b2362
> > (1) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> > (1) Calling-Station-Id = "28-00-AF-0F-A8-32"
> > (1) EAP-Message =
> > 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
> > (1) Message-Authenticator = 0xcc559b3212a95756ea6a742fc1963909
> > (1) Restoring &session-state
> > (1) &session-state:Framed-MTU = 994
> > (1) # Executing section authorize from file
> > /etc/freeradius/sites-enabled/default
> > (1) authorize {
> > (1) policy filter_username {
> > (1) if (&User-Name) {
> > (1) if (&User-Name) -> TRUE
> > (1) if (&User-Name) {
> > (1) if (&User-Name =~ / /) {
> > (1) if (&User-Name =~ / /) -> FALSE
> > (1) if (&User-Name =~ /@[^@]*@/ ) {
> > (1) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > (1) if (&User-Name =~ /\.\./ ) {
> > (1) if (&User-Name =~ /\.\./ ) -> FALSE
> > (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> > (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> > -> FALSE
> > (1) if (&User-Name =~ /\.$/) {
> > (1) if (&User-Name =~ /\.$/) -> FALSE
> > (1) if (&User-Name =~ /@\./) {
> > (1) if (&User-Name =~ /@\./) -> FALSE
> > (1) } # if (&User-Name) = notfound
> > (1) } # policy filter_username = notfound
> > (1) [preprocess] = ok
> > (1) [chap] = noop
> > (1) [mschap] = noop
> > (1) [digest] = noop
> > (1) suffix: Checking for suffix after "@"
> > (1) suffix: No '@' in User-Name =
> > "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> > (1) suffix: No such realm "NULL"
> > (1) [suffix] = noop
> > (1) eap: Peer sent EAP Response (code 2) ID 2 length 267
> > (1) eap: No EAP Start, assuming it's an on-going EAP conversation
> > (1) [eap] = updated
> > (1) [files] = noop
> > (1) [expiration] = noop
> > (1) [logintime] = noop
> > (1) [pap] = noop
> > (1) } # authorize = updated
> > (1) Found Auth-Type = eap
> > (1) # Executing group from file /etc/freeradius/sites-enabled/default
> > (1) authenticate {
> > (1) eap: Removing EAP session with state 0xa960c76da962ca67
> > (1) eap: Previous EAP request found for state 0xa960c76da962ca67,
> > released from the list
> > (1) eap: Peer sent packet with method EAP TLS (13)
> > (1) eap: Calling submodule eap_tls to process data
> > (1) eap_tls: (TLS) EAP Peer says that the final record size will be 257 bytes
> > (1) eap_tls: (TLS) EAP Got all data (257 bytes)
> > (1) eap_tls: (TLS) TLS - Handshake state - before SSL initialization
> > (1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
> > (1) eap_tls: (TLS) TLS - Handshake state - Server before SSL initialization
> > (1) eap_tls: (TLS) TLS - recv TLS 1.3 Handshake, ClientHello
> > (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS read client hello
> > (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, ServerHello
> > (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write server hello
> > (1) eap_tls: (TLS) TLS - send TLS 1.3 ChangeCipherSpec
> > (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
> > change cipher spec
> > (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, EncryptedExtensions
> > (1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write
> > encrypted extensions
> > (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateRequest
> > (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write
> > certificate request
> > (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Certificate
> > (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write certificate
> > (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, CertificateVerify
> > (1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 write server
> > certificate verify
> > (1) eap_tls: (TLS) TLS - send TLS 1.3 Handshake, Finished
> > (1) eap_tls: (TLS) TLS - Handshake state - Server SSLv3/TLS write finished
> > (1) eap_tls: (TLS) TLS - Handshake state - Server TLSv1.3 early data
> > (1) eap_tls: (TLS) TLS - Server : Need to read more data: TLSv1.3 early data
> > (1) eap_tls: (TLS) TLS - In Handshake Phase
> > (1) eap: Sending EAP Request (code 1) ID 3 length 1000
> > (1) eap: EAP session adding &reply:State = 0xa960c76da863ca67
> > (1) [eap] = handled
> > (1) } # authenticate = handled
> > (1) Using Post-Auth-Type Challenge
> > (1) # Executing group from file /etc/freeradius/sites-enabled/default
> > (1) Challenge { ... } # empty sub-section is ignored
> > (1) session-state: Saving cached attributes
> > (1) Framed-MTU = 994
> > (1) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> > ClientHello"
> > (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > ServerHello"
> > (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> > (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > EncryptedExtensions"
> > (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateRequest"
> > (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > Certificate"
> > (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateVerify"
> > (1) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> > (1) Sent Access-Challenge Id 226 from 10.0.0.5:1812 to
> > 185.241.224.187:35356 length 1064
> > (1) EAP-Message =
> > 0x010303e80dc000000fdb160303007a02000076030315b4bdf959e77a819ca5b04ba62a57391745e7bed4ed82f5b2439560cdb8d77120a00f349108c0a3d8a1825562e0cfc7691b328ffe45f9025dc72d0170776b431f130200002e002b0002030400330024001d00209639f2611dd7535b4db2fac1f7709482f843443278af0b934076fcb02adb07691403030001011703030017409bded55c5fc8075b8e54990bb1a5ed4c42044db7684a17030301374e577f3a09d50eb88f0faf4977b2c27762b050bce58ac056b15c39776ebb5b95a26cc8196b755d2cd2665ac7259691a99366935a39332f8f5da1eaa7c78ff13526f4ae124707f879a230e68b0f59b2993186a86c41085634dd4933ac77d752db76cbe073ca19402ddbdea29e830e8be189b692b124b9d0edfd5968d6859b86ac53e0dea8edf11683fec7c989c11829bb3d06e3fcd860fbf9bca4031b34066ad035591aa696988e6a7b4594ad4d96da7cb139927f81cf8b75785e86eb9865c2ec939a558bd7da98
> > (1) Message-Authenticator = 0x00000000000000000000000000000000
> > (1) State = 0xa960c76da863ca67c033c547c41b2362
> > (1) Finished request
> > Waking up in 20.9 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 20.3 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 15.3 seconds.
> > (2) Received Access-Request Id 227 from 185.241.224.187:35356 to
> > 10.0.0.5:1812 length 173
> > (2) NAS-IP-Address = 192.168.1.112
> > (2) NAS-Port-Type = Ethernet
> > (2) NAS-Port = 4
> > (2) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> > (2) Acct-Session-Id = "0500003F"
> > (2) State = 0xa960c76da863ca67c033c547c41b2362
> > (2) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> > (2) Calling-Station-Id = "28-00-AF-0F-A8-32"
> > (2) EAP-Message = 0x020300060d00
> > (2) Message-Authenticator = 0xbf0af695bb5ac349944293a07a61472c
> > (2) Restoring &session-state
> > (2) &session-state:Framed-MTU = 994
> > (2) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
> > 1.3 Handshake, ClientHello"
> > (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, ServerHello"
> > (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 ChangeCipherSpec"
> > (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, EncryptedExtensions"
> > (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, CertificateRequest"
> > (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Certificate"
> > (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, CertificateVerify"
> > (2) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Finished"
> > (2) # Executing section authorize from file
> > /etc/freeradius/sites-enabled/default
> > (2) authorize {
> > (2) policy filter_username {
> > (2) if (&User-Name) {
> > (2) if (&User-Name) -> TRUE
> > (2) if (&User-Name) {
> > (2) if (&User-Name =~ / /) {
> > (2) if (&User-Name =~ / /) -> FALSE
> > (2) if (&User-Name =~ /@[^@]*@/ ) {
> > (2) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > (2) if (&User-Name =~ /\.\./ ) {
> > (2) if (&User-Name =~ /\.\./ ) -> FALSE
> > (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> > (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> > -> FALSE
> > (2) if (&User-Name =~ /\.$/) {
> > (2) if (&User-Name =~ /\.$/) -> FALSE
> > (2) if (&User-Name =~ /@\./) {
> > (2) if (&User-Name =~ /@\./) -> FALSE
> > (2) } # if (&User-Name) = notfound
> > (2) } # policy filter_username = notfound
> > (2) [preprocess] = ok
> > (2) [chap] = noop
> > (2) [mschap] = noop
> > (2) [digest] = noop
> > (2) suffix: Checking for suffix after "@"
> > (2) suffix: No '@' in User-Name =
> > "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> > (2) suffix: No such realm "NULL"
> > (2) [suffix] = noop
> > (2) eap: Peer sent EAP Response (code 2) ID 3 length 6
> > (2) eap: No EAP Start, assuming it's an on-going EAP conversation
> > (2) [eap] = updated
> > (2) [files] = noop
> > (2) [expiration] = noop
> > (2) [logintime] = noop
> > (2) [pap] = noop
> > (2) } # authorize = updated
> > (2) Found Auth-Type = eap
> > (2) # Executing group from file /etc/freeradius/sites-enabled/default
> > (2) authenticate {
> > (2) eap: Removing EAP session with state 0xa960c76da863ca67
> > (2) eap: Previous EAP request found for state 0xa960c76da863ca67,
> > released from the list
> > (2) eap: Peer sent packet with method EAP TLS (13)
> > (2) eap: Calling submodule eap_tls to process data
> > (2) eap_tls: (TLS) Peer ACKed our handshake fragment
> > (2) eap: Sending EAP Request (code 1) ID 4 length 1000
> > (2) eap: EAP session adding &reply:State = 0xa960c76dab64ca67
> > (2) [eap] = handled
> > (2) } # authenticate = handled
> > (2) Using Post-Auth-Type Challenge
> > (2) # Executing group from file /etc/freeradius/sites-enabled/default
> > (2) Challenge { ... } # empty sub-section is ignored
> > (2) session-state: Saving cached attributes
> > (2) Framed-MTU = 994
> > (2) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> > ClientHello"
> > (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > ServerHello"
> > (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> > (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > EncryptedExtensions"
> > (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateRequest"
> > (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > Certificate"
> > (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateVerify"
> > (2) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> > (2) Sent Access-Challenge Id 227 from 10.0.0.5:1812 to
> > 185.241.224.187:35356 length 1064
> > (2) EAP-Message =
> > 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
> > (2) Message-Authenticator = 0x00000000000000000000000000000000
> > (2) State = 0xa960c76dab64ca67c033c547c41b2362
> > (2) Finished request
> > Waking up in 11.8 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 10.3 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 5.3 seconds.
> > (3) Received Access-Request Id 228 from 185.241.224.187:35356 to
> > 10.0.0.5:1812 length 173
> > (3) NAS-IP-Address = 192.168.1.112
> > (3) NAS-Port-Type = Ethernet
> > (3) NAS-Port = 4
> > (3) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> > (3) Acct-Session-Id = "0500003F"
> > (3) State = 0xa960c76dab64ca67c033c547c41b2362
> > (3) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> > (3) Calling-Station-Id = "28-00-AF-0F-A8-32"
> > (3) EAP-Message = 0x020400060d00
> > (3) Message-Authenticator = 0x038ead73ce4c8b0a455b6b5ffea2c726
> > (3) Restoring &session-state
> > (3) &session-state:Framed-MTU = 994
> > (3) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
> > 1.3 Handshake, ClientHello"
> > (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, ServerHello"
> > (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 ChangeCipherSpec"
> > (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, EncryptedExtensions"
> > (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, CertificateRequest"
> > (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Certificate"
> > (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, CertificateVerify"
> > (3) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Finished"
> > (3) # Executing section authorize from file
> > /etc/freeradius/sites-enabled/default
> > (3) authorize {
> > (3) policy filter_username {
> > (3) if (&User-Name) {
> > (3) if (&User-Name) -> TRUE
> > (3) if (&User-Name) {
> > (3) if (&User-Name =~ / /) {
> > (3) if (&User-Name =~ / /) -> FALSE
> > (3) if (&User-Name =~ /@[^@]*@/ ) {
> > (3) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > (3) if (&User-Name =~ /\.\./ ) {
> > (3) if (&User-Name =~ /\.\./ ) -> FALSE
> > (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> > (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> > -> FALSE
> > (3) if (&User-Name =~ /\.$/) {
> > (3) if (&User-Name =~ /\.$/) -> FALSE
> > (3) if (&User-Name =~ /@\./) {
> > (3) if (&User-Name =~ /@\./) -> FALSE
> > (3) } # if (&User-Name) = notfound
> > (3) } # policy filter_username = notfound
> > (3) [preprocess] = ok
> > (3) [chap] = noop
> > (3) [mschap] = noop
> > (3) [digest] = noop
> > (3) suffix: Checking for suffix after "@"
> > (3) suffix: No '@' in User-Name =
> > "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> > (3) suffix: No such realm "NULL"
> > (3) [suffix] = noop
> > (3) eap: Peer sent EAP Response (code 2) ID 4 length 6
> > (3) eap: No EAP Start, assuming it's an on-going EAP conversation
> > (3) [eap] = updated
> > (3) [files] = noop
> > (3) [expiration] = noop
> > (3) [logintime] = noop
> > (3) [pap] = noop
> > (3) } # authorize = updated
> > (3) Found Auth-Type = eap
> > (3) # Executing group from file /etc/freeradius/sites-enabled/default
> > (3) authenticate {
> > (3) eap: Removing EAP session with state 0xa960c76dab64ca67
> > (3) eap: Previous EAP request found for state 0xa960c76dab64ca67,
> > released from the list
> > (3) eap: Peer sent packet with method EAP TLS (13)
> > (3) eap: Calling submodule eap_tls to process data
> > (3) eap_tls: (TLS) Peer ACKed our handshake fragment
> > (3) eap: Sending EAP Request (code 1) ID 5 length 1000
> > (3) eap: EAP session adding &reply:State = 0xa960c76daa65ca67
> > (3) [eap] = handled
> > (3) } # authenticate = handled
> > (3) Using Post-Auth-Type Challenge
> > (3) # Executing group from file /etc/freeradius/sites-enabled/default
> > (3) Challenge { ... } # empty sub-section is ignored
> > (3) session-state: Saving cached attributes
> > (3) Framed-MTU = 994
> > (3) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> > ClientHello"
> > (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > ServerHello"
> > (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> > (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > EncryptedExtensions"
> > (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateRequest"
> > (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > Certificate"
> > (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateVerify"
> > (3) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> > (3) Sent Access-Challenge Id 228 from 10.0.0.5:1812 to
> > 185.241.224.187:35356 length 1064
> > (3) EAP-Message =
> > 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
> > (3) Message-Authenticator = 0x00000000000000000000000000000000
> > (3) State = 0xa960c76daa65ca67c033c547c41b2362
> > (3) Finished request
> > Waking up in 2.8 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 0.2 seconds.
> > (0) Cleaning up request packet ID 225 with timestamp +1392 due to
> > cleanup_delay was reached
> > Waking up in 9.0 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 4.3 seconds.
> > (4) Received Access-Request Id 229 from 185.241.224.187:35356 to
> > 10.0.0.5:1812 length 173
> > (4) NAS-IP-Address = 192.168.1.112
> > (4) NAS-Port-Type = Ethernet
> > (4) NAS-Port = 4
> > (4) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> > (4) Acct-Session-Id = "0500003F"
> > (4) State = 0xa960c76daa65ca67c033c547c41b2362
> > (4) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> > (4) Calling-Station-Id = "28-00-AF-0F-A8-32"
> > (4) EAP-Message = 0x020500060d00
> > (4) Message-Authenticator = 0xd41b050c3a3def192db05fd631f14607
> > (4) Restoring &session-state
> > (4) &session-state:Framed-MTU = 994
> > (4) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
> > 1.3 Handshake, ClientHello"
> > (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, ServerHello"
> > (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 ChangeCipherSpec"
> > (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, EncryptedExtensions"
> > (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, CertificateRequest"
> > (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Certificate"
> > (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, CertificateVerify"
> > (4) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Finished"
> > (4) # Executing section authorize from file
> > /etc/freeradius/sites-enabled/default
> > (4) authorize {
> > (4) policy filter_username {
> > (4) if (&User-Name) {
> > (4) if (&User-Name) -> TRUE
> > (4) if (&User-Name) {
> > (4) if (&User-Name =~ / /) {
> > (4) if (&User-Name =~ / /) -> FALSE
> > (4) if (&User-Name =~ /@[^@]*@/ ) {
> > (4) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > (4) if (&User-Name =~ /\.\./ ) {
> > (4) if (&User-Name =~ /\.\./ ) -> FALSE
> > (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> > (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> > -> FALSE
> > (4) if (&User-Name =~ /\.$/) {
> > (4) if (&User-Name =~ /\.$/) -> FALSE
> > (4) if (&User-Name =~ /@\./) {
> > (4) if (&User-Name =~ /@\./) -> FALSE
> > (4) } # if (&User-Name) = notfound
> > (4) } # policy filter_username = notfound
> > (4) [preprocess] = ok
> > (4) [chap] = noop
> > (4) [mschap] = noop
> > (4) [digest] = noop
> > (4) suffix: Checking for suffix after "@"
> > (4) suffix: No '@' in User-Name =
> > "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> > (4) suffix: No such realm "NULL"
> > (4) [suffix] = noop
> > (4) eap: Peer sent EAP Response (code 2) ID 5 length 6
> > (4) eap: No EAP Start, assuming it's an on-going EAP conversation
> > (4) [eap] = updated
> > (4) [files] = noop
> > (4) [expiration] = noop
> > (4) [logintime] = noop
> > (4) [pap] = noop
> > (4) } # authorize = updated
> > (4) Found Auth-Type = eap
> > (4) # Executing group from file /etc/freeradius/sites-enabled/default
> > (4) authenticate {
> > (4) eap: Removing EAP session with state 0xa960c76daa65ca67
> > (4) eap: Previous EAP request found for state 0xa960c76daa65ca67,
> > released from the list
> > (4) eap: Peer sent packet with method EAP TLS (13)
> > (4) eap: Calling submodule eap_tls to process data
> > (4) eap_tls: (TLS) Peer ACKed our handshake fragment
> > (4) eap: Sending EAP Request (code 1) ID 6 length 1000
> > (4) eap: EAP session adding &reply:State = 0xa960c76dad66ca67
> > (4) [eap] = handled
> > (4) } # authenticate = handled
> > (4) Using Post-Auth-Type Challenge
> > (4) # Executing group from file /etc/freeradius/sites-enabled/default
> > (4) Challenge { ... } # empty sub-section is ignored
> > (4) session-state: Saving cached attributes
> > (4) Framed-MTU = 994
> > (4) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> > ClientHello"
> > (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > ServerHello"
> > (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> > (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > EncryptedExtensions"
> > (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateRequest"
> > (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > Certificate"
> > (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateVerify"
> > (4) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> > (4) Sent Access-Challenge Id 229 from 10.0.0.5:1812 to
> > 185.241.224.187:35356 length 1064
> > (4) EAP-Message =
> > 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
> > (4) Message-Authenticator = 0x00000000000000000000000000000000
> > (4) State = 0xa960c76dad66ca67c033c547c41b2362
> > (4) Finished request
> > Waking up in 2.8 seconds.
> > (1) Cleaning up request packet ID 226 with timestamp +1401 due to
> > cleanup_delay was reached
> > Waking up in 9.0 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 8.3 seconds.
> > ... new connection request on TCP socket
> > Ignoring new connection due to client max_connections (16)
> > Waking up in 3.3 seconds.
> > (5) Received Access-Request Id 230 from 185.241.224.187:35356 to
> > 10.0.0.5:1812 length 173
> > (5) NAS-IP-Address = 192.168.1.112
> > (5) NAS-Port-Type = Ethernet
> > (5) NAS-Port = 4
> > (5) User-Name = "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352"
> > (5) Acct-Session-Id = "0500003F"
> > (5) State = 0xa960c76dad66ca67c033c547c41b2362
> > (5) Called-Station-Id = "A4-B2-39-CD-FE-3F"
> > (5) Calling-Station-Id = "28-00-AF-0F-A8-32"
> > (5) EAP-Message = 0x020600060d00
> > (5) Message-Authenticator = 0x0dc4ca0033f30b31ea12f0a84c3615c3
> > (5) Restoring &session-state
> > (5) &session-state:Framed-MTU = 994
> > (5) &session-state:TLS-Session-Information = "(TLS) TLS - recv TLS
> > 1.3 Handshake, ClientHello"
> > (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, ServerHello"
> > (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 ChangeCipherSpec"
> > (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, EncryptedExtensions"
> > (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, CertificateRequest"
> > (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Certificate"
> > (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, CertificateVerify"
> > (5) &session-state:TLS-Session-Information = "(TLS) TLS - send TLS
> > 1.3 Handshake, Finished"
> > (5) # Executing section authorize from file
> > /etc/freeradius/sites-enabled/default
> > (5) authorize {
> > (5) policy filter_username {
> > (5) if (&User-Name) {
> > (5) if (&User-Name) -> TRUE
> > (5) if (&User-Name) {
> > (5) if (&User-Name =~ / /) {
> > (5) if (&User-Name =~ / /) -> FALSE
> > (5) if (&User-Name =~ /@[^@]*@/ ) {
> > (5) if (&User-Name =~ /@[^@]*@/ ) -> FALSE
> > (5) if (&User-Name =~ /\.\./ ) {
> > (5) if (&User-Name =~ /\.\./ ) -> FALSE
> > (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) {
> > (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/))
> > -> FALSE
> > (5) if (&User-Name =~ /\.$/) {
> > (5) if (&User-Name =~ /\.$/) -> FALSE
> > (5) if (&User-Name =~ /@\./) {
> > (5) if (&User-Name =~ /@\./) -> FALSE
> > (5) } # if (&User-Name) = notfound
> > (5) } # policy filter_username = notfound
> > (5) [preprocess] = ok
> > (5) [chap] = noop
> > (5) [mschap] = noop
> > (5) [digest] = noop
> > (5) suffix: Checking for suffix after "@"
> > (5) suffix: No '@' in User-Name =
> > "host/353ec014-5c70-4e4c-a7c8-b9c8b5860352", looking up realm NULL
> > (5) suffix: No such realm "NULL"
> > (5) [suffix] = noop
> > (5) eap: Peer sent EAP Response (code 2) ID 6 length 6
> > (5) eap: No EAP Start, assuming it's an on-going EAP conversation
> > (5) [eap] = updated
> > (5) [files] = noop
> > (5) [expiration] = noop
> > (5) [logintime] = noop
> > (5) [pap] = noop
> > (5) } # authorize = updated
> > (5) Found Auth-Type = eap
> > (5) # Executing group from file /etc/freeradius/sites-enabled/default
> > (5) authenticate {
> > (5) eap: Removing EAP session with state 0xa960c76dad66ca67
> > (5) eap: Previous EAP request found for state 0xa960c76dad66ca67,
> > released from the list
> > (5) eap: Peer sent packet with method EAP TLS (13)
> > (5) eap: Calling submodule eap_tls to process data
> > (5) eap_tls: (TLS) Peer ACKed our handshake fragment
> > (5) eap: Sending EAP Request (code 1) ID 7 length 109
> > (5) eap: EAP session adding &reply:State = 0xa960c76dac67ca67
> > (5) [eap] = handled
> > (5) } # authenticate = handled
> > (5) Using Post-Auth-Type Challenge
> > (5) # Executing group from file /etc/freeradius/sites-enabled/default
> > (5) Challenge { ... } # empty sub-section is ignored
> > (5) session-state: Saving cached attributes
> > (5) Framed-MTU = 994
> > (5) TLS-Session-Information = "(TLS) TLS - recv TLS 1.3 Handshake,
> > ClientHello"
> > (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > ServerHello"
> > (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 ChangeCipherSpec"
> > (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > EncryptedExtensions"
> > (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateRequest"
> > (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > Certificate"
> > (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake,
> > CertificateVerify"
> > (5) TLS-Session-Information = "(TLS) TLS - send TLS 1.3 Handshake, Finished"
> > (5) Sent Access-Challenge Id 230 from 10.0.0.5:1812 to
> > 185.241.224.187:35356 length 167
> > (5) EAP-Message =
> > 0x0107006d0d8000000fdbe33d32c6d71228255ebeafdd018899878a8fe0a80f886c4eb5170303004513e76f1ad52ae44957d10ac939c3d9a463013e536725fa716af274ae1ca18448ac2820e8abb26835729ebf1a1e0cca06c6553bba22f0249caa9e90802e54b60b89891323cb
> > (5) Message-Authenticator = 0x00000000000000000000000000000000
> > (5) State = 0xa960c76dac67ca67c033c547c41b2362
> > (5) Finished request
> > Waking up in 2.9 seconds.
> > (2) Cleaning up request packet ID 227 with timestamp +1410 due to
> > cleanup_delay was reached
> > Ready to process requests
> > -
> > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
More information about the Freeradius-Users
mailing list