Re: help with configs for eap-md5

25 Aug 2015

      Ok, that did it...thanks again for the help!

Below is my working supplicant config and radiusd output for eap-peap with
phase2 eap-md5...

ctrl_interface=/var/run/wpa_supplicant
fast_reauth=1
concurrent_assoc_ok=1
accept_external_scan_results=1
scan_cur_freq=1
min_scan_gap=5
p2p_disabled=1

bss_max_count=2000
network={
    ssid="ac-vap-ch149"
    disable_ht=0
    disable_vht=0
    ieee80211w=0
    disable_ht40=0
    disable_sgi=0
    ht_mcs=""
    disable_max_amsdu=-1
    ampdu_factor=-1
    ampdu_density=-1

    proto=RSN
    key_mgmt=WPA-EAP
    eap=PEAP
    ocsp=0
    pairwise=TKIP CCMP
    group=TKIP CCMP
    identity="testuser"
    password="testpasswd"
    phase2="auth=MD5"
    proactive_key_caching=0

}

[1mradiusd: FreeRADIUS Version 3.0.3, for host x86_64-redhat-linux-gnu,
built on Jun  3 2014 at 12:39:33[0m
[1mCopyright (C) 1999-2014 The FreeRADIUS server project and
contributors[0m
[1mThere is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A[0m
[1mPARTICULAR PURPOSE[0m
[1mYou may redistribute copies of FreeRADIUS under the terms of the[0m
[1mGNU General Public License[0m
[1mFor more information about these matters, see the file named
COPYRIGHT[0m
[1mStarting - reading configuration files ...[0m
including dictionary file /usr/share/freeradius/dictionary
including dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary
including configuration file /etc/raddb/radiusd.conf
including configuration file /etc/raddb/proxy.conf
including configuration file /etc/raddb/clients.conf
including files in directory /etc/raddb/mods-enabled/
including configuration file /etc/raddb/mods-enabled/soh
including configuration file /etc/raddb/mods-enabled/linelog
including configuration file /etc/raddb/mods-enabled/pap
including configuration file /etc/raddb/mods-enabled/utf8
including configuration file /etc/raddb/mods-enabled/ntlm_auth
including configuration file /etc/raddb/mods-enabled/eap
including configuration file /etc/raddb/mods-enabled/mschap
including configuration file /etc/raddb/mods-enabled/unix
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/files
including configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/chap
including configuration file /etc/raddb/mods-enabled/passwd
including configuration file /etc/raddb/mods-enabled/expr
including configuration file /etc/raddb/mods-enabled/digest
including configuration file /etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/echo
including configuration file /etc/raddb/mods-enabled/dhcp
including configuration file /etc/raddb/mods-enabled/detail
including configuration file /etc/raddb/mods-enabled/unpack
including configuration file /etc/raddb/mods-enabled/logintime
including configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/realm
including configuration file /etc/raddb/mods-enabled/always
including configuration file /etc/raddb/mods-enabled/exec
including configuration file /etc/raddb/mods-enabled/replicate
including configuration file /etc/raddb/mods-enabled/radutmp
including configuration file /etc/raddb/mods-enabled/sradutmp
including configuration file /etc/raddb/mods-enabled/detail.log
including files in directory /etc/raddb/policy.d/
including configuration file /etc/raddb/policy.d/operator-name
including configuration file /etc/raddb/policy.d/eap
including configuration file /etc/raddb/policy.d/control
including configuration file /etc/raddb/policy.d/filter
including configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/dhcp
including configuration file /etc/raddb/policy.d/accounting
including configuration file /etc/raddb/policy.d/cui
including files in directory /etc/raddb/sites-enabled/
including configuration file /etc/raddb/sites-enabled/default
including configuration file /etc/raddb/sites-enabled/inner-tunnel
main {
 security {
  user = "radiusd"
  group = "radiusd"
  allow_core_dumps = no
 }
}
main {
name = "radiusd"
prefix = "/usr"
localstatedir = "/var"
sbindir = "/usr/sbin"
logdir = "/var/log/radius"
run_dir = "/var/run/radiusd"
libdir = "/usr/lib64/freeradius"
radacctdir = "/var/log/radius/radacct"
hostname_lookups = no
max_request_time = 30
cleanup_delay = 5
max_requests = 1024
pidfile = "/var/run/radiusd/radiusd.pid"
checkrad = "/usr/sbin/checkrad"
debug_level = 0
proxy_requests = yes
 log {
  stripped_names = no
  auth = no
  auth_badpass = no
  auth_goodpass = no
  colourise = yes
  msg_denied = "You are already logged in - access denied"
 }
 security {
  max_attributes = 200
  reject_delay = 1
  status_server = yes
  allow_vulnerable_openssl = "CVE-2014-0160"
 }
}
radiusd: #### Loading Realms and Home Servers ####
 proxy server {
  retry_delay = 5
  retry_count = 3
  default_fallback = no
  dead_time = 120
  wake_all_if_all_dead = no
 }
 home_server localhost {
  ipaddr = 127.0.0.1
  port = 1812
  type = "auth"
  secret = <<< secret >>>
  response_window = 20
  max_outstanding = 65536
  zombie_period = 40
  status_check = "status-server"
  ping_interval = 30
  check_interval = 30
  num_answers_to_alive = 3
  revive_interval = 120
  status_check_timeout = 4
  coa {
  irt = 2
  mrt = 16
  mrc = 5
  mrd = 30
  }
  limit {
  max_connections = 16
  max_requests = 0
  lifetime = 0
  idle_timeout = 0
  }
 }
 home_server_pool my_auth_failover {
type = fail-over
home_server = localhost
 }
 realm example.com {
auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
radiusd: #### Loading Clients ####
 client localhost {
  ipaddr = 127.0.0.1
  require_message_authenticator = no
  secret = <<< secret >>>
  nas_type = "other"
  proto = "*"
  limit {
  max_connections = 16
  lifetime = 0
  idle_timeout = 30
  }
 }
radiusd: #### Instantiating modules ####
 instantiate {
 }
 modules {
  # Loaded module rlm_soh
  # Instantiating module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
  dhcp = yes
  }
  # Loaded module rlm_linelog
  # Instantiating module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
  filename = "/var/log/radius/linelog"
  permissions = 384
  format = "This is a log message for %{User-Name}"
  reference = "messages.%{%{Packet-Type}:-default}"
  }
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
  filename = "/var/log/radius/linelog-accounting"
  permissions = 384
  format = ""
  reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_pap
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
  normalise = yes
  }
  # Loaded module rlm_utf8
  # Instantiating module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_exec
  # Instantiating module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
  wait = yes
  program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN
--username=%{mschap:User-Name} --password=%{User-Password}"
  shell_escape = yes
  }
  # Loaded module rlm_eap
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
  default_eap_type = "md5"
  timer_expire = 60
  ignore_unknown_eap_types = no
  mod_accounting_username_bug = no
  max_sessions = 1024
  }
   # Linked to sub-module rlm_eap_md5
   # Linked to sub-module rlm_eap_leap
   # Linked to sub-module rlm_eap_gtc
   gtc {
    challenge = "Password: "
    auth_type = "PAP"
   }
   # Linked to sub-module rlm_eap_tls
   tls {
    tls = "tls-common"
   }
   tls-config tls-common {
    rsa_key_exchange = no
    dh_key_exchange = yes
    rsa_key_length = 512
    dh_key_length = 512
    verify_depth = 0
    ca_path = "/etc/raddb/certs"
    pem_file_type = yes
    private_key_file = "/etc/raddb/certs/server.pem"
    certificate_file = "/etc/raddb/certs/server.pem"
    ca_file = "/etc/raddb/certs/ca.pem"
    private_key_password = <<< secret >>>
    dh_file = "/etc/raddb/certs/dh"
    fragment_size = 1024
    include_length = yes
    check_crl = no
    cipher_list = "DEFAULT"
    ecdh_curve = "prime256v1"
    cache {
    enable = yes
    lifetime = 24
    max_entries = 255
    }
    verify {
    }
    ocsp {
    enable = no
    override_cert_url = yes
    url = "http://127.0.0.1/ocsp/"
    use_nonce = yes
    timeout = 0
    softfail = yes
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
    tls = "tls-common"
    default_eap_type = "md5"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    virtual_server = "inner-tunnel"
    include_length = yes
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
    tls = "tls-common"
    default_method = "mschapv2"
    copy_request_to_tunnel = no
    use_tunneled_reply = no
    proxy_tunneled_request_as_eap = yes
    virtual_server = "inner-tunnel"
    soh = no
    require_client_cert = no
   }
Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
    with_ntdomain_hack = no
    send_error = no
   }
  # Loaded module rlm_mschap
  # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
  use_mppe = yes
  require_encryption = no
  require_strong = no
  with_ntdomain_hack = yes
   passchange {
   }
  allow_retry = yes
  }
  # Loaded module rlm_unix
  # Instantiating module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
  radwtmp = "/var/log/radius/radwtmp"
  }
  # Loaded module rlm_cache
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
  key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
  ttl = 15
  max_entries = 16384
  epoch = 0
  add_stats = no
  }
  # Loaded module rlm_files
  # Instantiating module "files" from file /etc/raddb/mods-enabled/files
  files {
  filename = "/etc/raddb/mods-config/files/authorize"
  usersfile = "/etc/raddb/mods-config/files/authorize"
  acctusersfile = "/etc/raddb/mods-config/files/accounting"
  preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  compat = "cistron"
  }
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for
entry lanforge ...
[/etc/raddb/mods-config/files/authorize]:6 Cistron compatibility checks for
entry testuser ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/authorize
[/etc/raddb/mods-config/files/authorize]:2 Cistron compatibility checks for
entry lanforge ...
[/etc/raddb/mods-config/files/authorize]:6 Cistron compatibility checks for
entry testuser ...
[/etc/raddb/mods-config/files/authorize]:188 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:195 Cistron compatibility checks
for entry DEFAULT ...
[/etc/raddb/mods-config/files/authorize]:202 Cistron compatibility checks
for entry DEFAULT ...
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Loaded module rlm_expiration
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_chap
  # Instantiating module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_passwd
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
  filename = "/etc/passwd"
  format = "*User-Name:Crypt-Password:"
  delimiter = ":"
  ignore_nislike = no
  ignore_empty = yes
  allow_multiple_keys = no
  hash_size = 100
  }
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Loaded module rlm_expr
  # Instantiating module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
  safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
  }
  # Loaded module rlm_digest
  # Instantiating module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_preprocess
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
  huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
  hints = "/etc/raddb/mods-config/preprocess/hints"
  with_ascend_hack = no
  ascend_channels_per_line = 23
  with_ntdomain_hack = no
  with_specialix_jetstream_hack = no
  with_cisco_vsa_hack = no
  with_alvarion_vsa_hack = no
  }
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
  wait = yes
  program = "/bin/echo %{User-Name}"
  input_pairs = "request"
  output_pairs = "reply"
  shell_escape = yes
  }
  # Loaded module rlm_dhcp
  # Instantiating module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_detail
  # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Loaded module rlm_unpack
  # Instantiating module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_logintime
  # Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
  logintime {
  minimum_timeout = 60
  }
  # Loaded module rlm_dynamic_clients
  # Instantiating module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_attr_filter
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
  filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
  key = "%{Realm}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
  filename = "/etc/raddb/mods-config/attr_filter/access_reject"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
  filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
  filename = "/etc/raddb/mods-config/attr_filter/accounting_response"
  key = "%{User-Name}"
  relaxed = no
  }
reading pairlist file /etc/raddb/mods-config/attr_filter/accounting_response
  # Loaded module rlm_realm
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
  format = "prefix"
  delimiter = "/"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
  format = "suffix"
  delimiter = "@"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  realm realmpercent {
  format = "suffix"
  delimiter = "%"
  ignore_default = no
  ignore_null = no
  }
  # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
  format = "prefix"
  delimiter = "\"
  ignore_default = no
  ignore_null = no
  }
  # Loaded module rlm_always
  # Instantiating module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
  rcode = "reject"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
  rcode = "fail"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
  rcode = "ok"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
  rcode = "handled"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
  rcode = "invalid"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
  rcode = "userlock"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
  rcode = "notfound"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
  rcode = "noop"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
  rcode = "updated"
  simulcount = 0
  mpp = no
  }
  # Instantiating module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
  wait = no
  input_pairs = "request"
  shell_escape = yes
  timeout = 10
  }
  # Loaded module rlm_replicate
  # Instantiating module "replicate" from file
/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_radutmp
  # Instantiating module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
  filename = "/var/log/radius/radutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 384
  caller_id = yes
  }
  # Instantiating module "sradutmp" from file
/etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
  filename = "/var/log/radius/sradutmp"
  username = "%{User-Name}"
  case_sensitive = yes
  check_with_nas = yes
  permissions = 420
  caller_id = no
  }
  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
  detail auth_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  detail reply_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
  filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
  header = "%t"
  permissions = 384
  locking = no
  log_packet_header = no
  }
 } # modules
radiusd: #### Loading Virtual Servers ####
server { # from file /etc/raddb/radiusd.conf
} # server
server default { # from file /etc/raddb/sites-enabled/default
 # Creating Auth-Type = digest
 # Loading authenticate {...}
 # Loading authorize {...}
Ignoring "sql" (see raddb/mods-available/README.rst)
Ignoring "ldap" (see raddb/mods-available/README.rst)
 # Loading preacct {...}
 # Loading accounting {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server default
server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-proxy {...}
 # Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports ####
listen {
  type = "auth"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "acct"
  ipaddr = *
  port = 0
   limit {
    max_connections = 16
    lifetime = 0
    idle_timeout = 30
   }
}
listen {
  type = "auth"
  ipaddr = 127.0.0.1
  port = 18120
}
Listening on auth address * port 1812 as server default
Listening on acct address * port 1813 as server default
Listening on auth address 127.0.0.1 port 18120 as server inner-tunnel
Opening new proxy socket 'proxy address * port 0'
Listening on proxy address * port 45066
Ready to process requests.
Received Access-Request Id 145 from 127.0.0.1:35433 to 127.0.0.1:1812
length 199
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x0222000d017465737475736572
Message-Authenticator = 0x9ff690e3f4b0d04124641d6030082d7b
(0) # Executing section authorize from file /etc/raddb/sites-enabled/default
(0)   authorize {
(0)   filter_username filter_username {
(0)     if (User-Name != "%{tolower:%{User-Name}}")
(0) EXPAND %{tolower:%{User-Name}}
(0)    --> testuser
(0)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(0)     if (User-Name =~ / /)
(0)     if (User-Name =~ / /)  -> FALSE
(0)     if (User-Name =~ /@.*@/ )
(0)     if (User-Name =~ /@.*@/ )  -> FALSE
(0)     if (User-Name =~ /\\.\\./ )
(0)     if (User-Name =~ /\\.\\./ )  -> FALSE
(0)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(0)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(0)     if (User-Name =~ /\\.$/)
(0)     if (User-Name =~ /\\.$/)   -> FALSE
(0)     if (User-Name =~ /@\\./)
(0)     if (User-Name =~ /@\\./)   -> FALSE
(0)   } # filter_username filter_username = notfound
(0)   [chap] = noop
(0)   [mschap] = noop
(0)   [digest] = noop
(0) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(0) suffix : No such realm "NULL"
(0)   [suffix] = noop
(0) eap : EAP packet type response id 34 length 13
(0) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(0)   [eap] = ok
(0)  } #  authorize = ok
(0) Found Auth-Type = EAP
(0) # Executing group from file /etc/raddb/sites-enabled/default
(0)   authenticate {
(0) eap : Peer sent Identity (1)
(0) eap : Calling eap_md5 to process EAP data
(0) eap_md5 : Issuing MD5 Challenge
(0) eap : New EAP session, adding 'State' attribute to reply
0x75142d527537299a
(0)   [eap] = handled
(0)  } #  authenticate = handled
Sending Access-Challenge Id 145 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message = 0x0123001604107f3173310b0456504697d8814a3797d6
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d527537299a21ce87fd9082fb30
(0) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 146 from 127.0.0.1:35433 to 127.0.0.1:1812
length 210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x022300060319
State = 0x75142d527537299a21ce87fd9082fb30
Message-Authenticator = 0xb169a075c02949988c7f39671fd35eae
(1) # Executing section authorize from file /etc/raddb/sites-enabled/default
(1)   authorize {
(1)   filter_username filter_username {
(1)     if (User-Name != "%{tolower:%{User-Name}}")
(1) EXPAND %{tolower:%{User-Name}}
(1)    --> testuser
(1)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(1)     if (User-Name =~ / /)
(1)     if (User-Name =~ / /)  -> FALSE
(1)     if (User-Name =~ /@.*@/ )
(1)     if (User-Name =~ /@.*@/ )  -> FALSE
(1)     if (User-Name =~ /\\.\\./ )
(1)     if (User-Name =~ /\\.\\./ )  -> FALSE
(1)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(1)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(1)     if (User-Name =~ /\\.$/)
(1)     if (User-Name =~ /\\.$/)   -> FALSE
(1)     if (User-Name =~ /@\\./)
(1)     if (User-Name =~ /@\\./)   -> FALSE
(1)   } # filter_username filter_username = notfound
(1)   [chap] = noop
(1)   [mschap] = noop
(1)   [digest] = noop
(1) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(1) suffix : No such realm "NULL"
(1)   [suffix] = noop
(1) eap : EAP packet type response id 35 length 6
(1) eap : No EAP Start, assuming it's an on-going EAP conversation
(1)   [eap] = updated
(1) files : users: Matched entry testuser at line 6
(1)   [files] = ok
(1)   [expiration] = noop
(1)   [logintime] = noop
(1) WARNING: pap : Auth-Type already set.  Not setting to PAP
(1)   [pap] = noop
(1)  } #  authorize = updated
(1) Found Auth-Type = EAP
(1) # Executing group from file /etc/raddb/sites-enabled/default
(1)   authenticate {
(1) eap : Expiring EAP session with state 0x75142d527537299a
(1) eap : Finished EAP session with state 0x75142d527537299a
(1) eap : Previous EAP request found for state 0x75142d527537299a, released
from the list
(1) eap : Peer sent NAK (3)
(1) eap : Found mutually acceptable type PEAP (25)
(1) eap : Calling eap_peap to process EAP data
(1) eap_peap : Flushing SSL sessions (of #0)
(1) eap_peap : Initiate
(1) eap_peap : Start returned 1
(1) eap : New EAP session, adding 'State' attribute to reply
0x75142d527430349a
(1)   [eap] = handled
(1)  } #  authenticate = handled
Sending Access-Challenge Id 146 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message = 0x012400061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d527430349a21ce87fd9082fb30
(1) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 147 from 127.0.0.1:35433 to 127.0.0.1:1812
length 461
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
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
State = 0x75142d527430349a21ce87fd9082fb30
Message-Authenticator = 0xa59c34fe7aff5cb8b89116b5abf73625
(2) # Executing section authorize from file /etc/raddb/sites-enabled/default
(2)   authorize {
(2)   filter_username filter_username {
(2)     if (User-Name != "%{tolower:%{User-Name}}")
(2) EXPAND %{tolower:%{User-Name}}
(2)    --> testuser
(2)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(2)     if (User-Name =~ / /)
(2)     if (User-Name =~ / /)  -> FALSE
(2)     if (User-Name =~ /@.*@/ )
(2)     if (User-Name =~ /@.*@/ )  -> FALSE
(2)     if (User-Name =~ /\\.\\./ )
(2)     if (User-Name =~ /\\.\\./ )  -> FALSE
(2)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(2)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(2)     if (User-Name =~ /\\.$/)
(2)     if (User-Name =~ /\\.$/)   -> FALSE
(2)     if (User-Name =~ /@\\./)
(2)     if (User-Name =~ /@\\./)   -> FALSE
(2)   } # filter_username filter_username = notfound
(2)   [chap] = noop
(2)   [mschap] = noop
(2)   [digest] = noop
(2) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(2) suffix : No such realm "NULL"
(2)   [suffix] = noop
(2) eap : EAP packet type response id 36 length 255
(2) eap : Continuing tunnel setup.
(2)   [eap] = ok
(2)  } #  authorize = ok
(2) Found Auth-Type = EAP
(2) # Executing group from file /etc/raddb/sites-enabled/default
(2)   authenticate {
(2) eap : Expiring EAP session with state 0x75142d527430349a
(2) eap : Finished EAP session with state 0x75142d527430349a
(2) eap : Previous EAP request found for state 0x75142d527430349a, released
from the list
(2) eap : Peer sent PEAP (25)
(2) eap : EAP PEAP (25)
(2) eap : Calling eap_peap to process EAP data
(2) eap_peap : processing EAP-TLS
  TLS Length 245
(2) eap_peap : Length Included
(2) eap_peap : eaptls_verify returned 11
(2) eap_peap :     (other): before/accept initialization
(2) eap_peap :     TLS_accept: before/accept initialization
(2) eap_peap : <<< TLS 1.0 Handshake [length 00f0], ClientHello
(2) eap_peap :     TLS_accept: SSLv3 read client hello A
(2) eap_peap : >>> TLS 1.0 Handshake [length 005e], ServerHello
(2) eap_peap :     TLS_accept: SSLv3 write server hello A
(2) eap_peap : >>> TLS 1.0 Handshake [length 0919], Certificate
(2) eap_peap :     TLS_accept: SSLv3 write certificate A
(2) eap_peap : >>> TLS 1.0 Handshake [length 014b], ServerKeyExchange
(2) eap_peap :     TLS_accept: SSLv3 write key exchange A
(2) eap_peap : >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
(2) eap_peap :     TLS_accept: SSLv3 write server done A
(2) eap_peap :     TLS_accept: SSLv3 flush data
(2) eap_peap :     TLS_accept: Need to read more data: SSLv3 read client
certificate A
In SSL Handshake Phase
In SSL Accept mode
(2) eap_peap : eaptls_process returned 13
(2) eap_peap : FR_TLS_HANDLED
(2) eap : New EAP session, adding 'State' attribute to reply
0x75142d527731349a
(2)   [eap] = handled
(2)  } #  authenticate = handled
Sending Access-Challenge Id 147 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d527731349a21ce87fd9082fb30
(2) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 148 from 127.0.0.1:35433 to 127.0.0.1:1812
length 210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x022500061900
State = 0x75142d527731349a21ce87fd9082fb30
Message-Authenticator = 0xe713a280da96374e24a7196697e565f1
(3) # Executing section authorize from file /etc/raddb/sites-enabled/default
(3)   authorize {
(3)   filter_username filter_username {
(3)     if (User-Name != "%{tolower:%{User-Name}}")
(3) EXPAND %{tolower:%{User-Name}}
(3)    --> testuser
(3)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(3)     if (User-Name =~ / /)
(3)     if (User-Name =~ / /)  -> FALSE
(3)     if (User-Name =~ /@.*@/ )
(3)     if (User-Name =~ /@.*@/ )  -> FALSE
(3)     if (User-Name =~ /\\.\\./ )
(3)     if (User-Name =~ /\\.\\./ )  -> FALSE
(3)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(3)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(3)     if (User-Name =~ /\\.$/)
(3)     if (User-Name =~ /\\.$/)   -> FALSE
(3)     if (User-Name =~ /@\\./)
(3)     if (User-Name =~ /@\\./)   -> FALSE
(3)   } # filter_username filter_username = notfound
(3)   [chap] = noop
(3)   [mschap] = noop
(3)   [digest] = noop
(3) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(3) suffix : No such realm "NULL"
(3)   [suffix] = noop
(3) eap : EAP packet type response id 37 length 6
(3) eap : Continuing tunnel setup.
(3)   [eap] = ok
(3)  } #  authorize = ok
(3) Found Auth-Type = EAP
(3) # Executing group from file /etc/raddb/sites-enabled/default
(3)   authenticate {
(3) eap : Expiring EAP session with state 0x75142d527731349a
(3) eap : Finished EAP session with state 0x75142d527731349a
(3) eap : Previous EAP request found for state 0x75142d527731349a, released
from the list
(3) eap : Peer sent PEAP (25)
(3) eap : EAP PEAP (25)
(3) eap : Calling eap_peap to process EAP data
(3) eap_peap : processing EAP-TLS
(3) eap_peap : Received TLS ACK
(3) eap_peap : Received TLS ACK
(3) eap_peap : ACK handshake fragment handler
(3) eap_peap : eaptls_verify returned 1
(3) eap_peap : eaptls_process returned 13
(3) eap_peap : FR_TLS_HANDLED
(3) eap : New EAP session, adding 'State' attribute to reply
0x75142d527632349a
(3)   [eap] = handled
(3)  } #  authenticate = handled
Sending Access-Challenge Id 148 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d527632349a21ce87fd9082fb30
(3) Finished request
Waking up in 0.3 seconds.
Received Access-Request Id 149 from 127.0.0.1:35433 to 127.0.0.1:1812
length 210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x022600061900
State = 0x75142d527632349a21ce87fd9082fb30
Message-Authenticator = 0xa5b7ea93eb09ca44dabf733d189350ec
(4) # Executing section authorize from file /etc/raddb/sites-enabled/default
(4)   authorize {
(4)   filter_username filter_username {
(4)     if (User-Name != "%{tolower:%{User-Name}}")
(4) EXPAND %{tolower:%{User-Name}}
(4)    --> testuser
(4)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(4)     if (User-Name =~ / /)
(4)     if (User-Name =~ / /)  -> FALSE
(4)     if (User-Name =~ /@.*@/ )
(4)     if (User-Name =~ /@.*@/ )  -> FALSE
(4)     if (User-Name =~ /\\.\\./ )
(4)     if (User-Name =~ /\\.\\./ )  -> FALSE
(4)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(4)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(4)     if (User-Name =~ /\\.$/)
(4)     if (User-Name =~ /\\.$/)   -> FALSE
(4)     if (User-Name =~ /@\\./)
(4)     if (User-Name =~ /@\\./)   -> FALSE
(4)   } # filter_username filter_username = notfound
(4)   [chap] = noop
(4)   [mschap] = noop
(4)   [digest] = noop
(4) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(4) suffix : No such realm "NULL"
(4)   [suffix] = noop
(4) eap : EAP packet type response id 38 length 6
(4) eap : Continuing tunnel setup.
(4)   [eap] = ok
(4)  } #  authorize = ok
(4) Found Auth-Type = EAP
(4) # Executing group from file /etc/raddb/sites-enabled/default
(4)   authenticate {
(4) eap : Expiring EAP session with state 0x75142d527632349a
(4) eap : Finished EAP session with state 0x75142d527632349a
(4) eap : Previous EAP request found for state 0x75142d527632349a, released
from the list
(4) eap : Peer sent PEAP (25)
(4) eap : EAP PEAP (25)
(4) eap : Calling eap_peap to process EAP data
(4) eap_peap : processing EAP-TLS
(4) eap_peap : Received TLS ACK
(4) eap_peap : Received TLS ACK
(4) eap_peap : ACK handshake fragment handler
(4) eap_peap : eaptls_verify returned 1
(4) eap_peap : eaptls_process returned 13
(4) eap_peap : FR_TLS_HANDLED
(4) eap : New EAP session, adding 'State' attribute to reply
0x75142d527133349a
(4)   [eap] = handled
(4)  } #  authenticate = handled
Sending Access-Challenge Id 149 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
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
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d527133349a21ce87fd9082fb30
(4) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 150 from 127.0.0.1:35433 to 127.0.0.1:1812
length 348
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x022700901980000000861603010046100000424104a73b5489fa36181f56348be489a2f9aade92a51bbec7ccaf93811fa9a80ff08226e166a9aa1bf5b6bb9e061904da62b7299e4e1119189ce46b8a1bad9bab6a7c1403010001011603010030e19dc3078d233d3c36848bd3271a94a48dbc9b48a5cb0698bd2b3bc1b1d46a18853f58710e8e5b266c3030ff61ccd2a4
State = 0x75142d527133349a21ce87fd9082fb30
Message-Authenticator = 0xb04e7b30f2d0b77925ca807436d22577
(5) # Executing section authorize from file /etc/raddb/sites-enabled/default
(5)   authorize {
(5)   filter_username filter_username {
(5)     if (User-Name != "%{tolower:%{User-Name}}")
(5) EXPAND %{tolower:%{User-Name}}
(5)    --> testuser
(5)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(5)     if (User-Name =~ / /)
(5)     if (User-Name =~ / /)  -> FALSE
(5)     if (User-Name =~ /@.*@/ )
(5)     if (User-Name =~ /@.*@/ )  -> FALSE
(5)     if (User-Name =~ /\\.\\./ )
(5)     if (User-Name =~ /\\.\\./ )  -> FALSE
(5)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(5)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(5)     if (User-Name =~ /\\.$/)
(5)     if (User-Name =~ /\\.$/)   -> FALSE
(5)     if (User-Name =~ /@\\./)
(5)     if (User-Name =~ /@\\./)   -> FALSE
(5)   } # filter_username filter_username = notfound
(5)   [chap] = noop
(5)   [mschap] = noop
(5)   [digest] = noop
(5) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(5) suffix : No such realm "NULL"
(5)   [suffix] = noop
(5) eap : EAP packet type response id 39 length 144
(5) eap : Continuing tunnel setup.
(5)   [eap] = ok
(5)  } #  authorize = ok
(5) Found Auth-Type = EAP
(5) # Executing group from file /etc/raddb/sites-enabled/default
(5)   authenticate {
(5) eap : Expiring EAP session with state 0x75142d527133349a
(5) eap : Finished EAP session with state 0x75142d527133349a
(5) eap : Previous EAP request found for state 0x75142d527133349a, released
from the list
(5) eap : Peer sent PEAP (25)
(5) eap : EAP PEAP (25)
(5) eap : Calling eap_peap to process EAP data
(5) eap_peap : processing EAP-TLS
  TLS Length 134
(5) eap_peap : Length Included
(5) eap_peap : eaptls_verify returned 11
(5) eap_peap : <<< TLS 1.0 Handshake [length 0046], ClientKeyExchange
(5) eap_peap :     TLS_accept: SSLv3 read client key exchange A
(5) eap_peap : <<< TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap : <<< TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap :     TLS_accept: SSLv3 read finished A
(5) eap_peap : >>> TLS 1.0 ChangeCipherSpec [length 0001]
(5) eap_peap :     TLS_accept: SSLv3 write change cipher spec A
(5) eap_peap : >>> TLS 1.0 Handshake [length 0010], Finished
(5) eap_peap :     TLS_accept: SSLv3 write finished A
(5) eap_peap :     TLS_accept: SSLv3 flush data
  SSL: adding session
9c99e0670e62c0ae5c46eb697f0d23bae0464fa0de77524d9d8b6cc578ccbc16 to cache
(5) eap_peap :     (other): SSL negotiation finished successfully
SSL Connection Established
(5) eap_peap : eaptls_process returned 13
(5) eap_peap : FR_TLS_HANDLED
(5) eap : New EAP session, adding 'State' attribute to reply
0x75142d52703c349a
(5)   [eap] = handled
(5)  } #  authenticate = handled
Sending Access-Challenge Id 150 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x0128004119001403010001011603010030362f45a9aec2234ac0cc55dc7a81b6255a8c641721bb17188f8e4e9e7b5c5a1c4517120b6c64571f68138340897d2ae7
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d52703c349a21ce87fd9082fb30
(5) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 151 from 127.0.0.1:35433 to 127.0.0.1:1812
length 210
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message = 0x022800061900
State = 0x75142d52703c349a21ce87fd9082fb30
Message-Authenticator = 0x0d3f76b1f45f3ee41f7937543acdc0a0
(6) # Executing section authorize from file /etc/raddb/sites-enabled/default
(6)   authorize {
(6)   filter_username filter_username {
(6)     if (User-Name != "%{tolower:%{User-Name}}")
(6) EXPAND %{tolower:%{User-Name}}
(6)    --> testuser
(6)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(6)     if (User-Name =~ / /)
(6)     if (User-Name =~ / /)  -> FALSE
(6)     if (User-Name =~ /@.*@/ )
(6)     if (User-Name =~ /@.*@/ )  -> FALSE
(6)     if (User-Name =~ /\\.\\./ )
(6)     if (User-Name =~ /\\.\\./ )  -> FALSE
(6)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(6)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(6)     if (User-Name =~ /\\.$/)
(6)     if (User-Name =~ /\\.$/)   -> FALSE
(6)     if (User-Name =~ /@\\./)
(6)     if (User-Name =~ /@\\./)   -> FALSE
(6)   } # filter_username filter_username = notfound
(6)   [chap] = noop
(6)   [mschap] = noop
(6)   [digest] = noop
(6) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(6) suffix : No such realm "NULL"
(6)   [suffix] = noop
(6) eap : EAP packet type response id 40 length 6
(6) eap : Continuing tunnel setup.
(6)   [eap] = ok
(6)  } #  authorize = ok
(6) Found Auth-Type = EAP
(6) # Executing group from file /etc/raddb/sites-enabled/default
(6)   authenticate {
(6) eap : Expiring EAP session with state 0x75142d52703c349a
(6) eap : Finished EAP session with state 0x75142d52703c349a
(6) eap : Previous EAP request found for state 0x75142d52703c349a, released
from the list
(6) eap : Peer sent PEAP (25)
(6) eap : EAP PEAP (25)
(6) eap : Calling eap_peap to process EAP data
(6) eap_peap : processing EAP-TLS
(6) eap_peap : Received TLS ACK
(6) eap_peap : Received TLS ACK
(6) eap_peap : ACK handshake is finished
(6) eap_peap : eaptls_verify returned 3
(6) eap_peap : eaptls_process returned 3
(6) eap_peap : FR_TLS_SUCCESS
(6) eap_peap : Session established.  Decoding tunneled attributes.
(6) eap_peap : Peap state TUNNEL ESTABLISHED
(6) eap : New EAP session, adding 'State' attribute to reply
0x75142d52733d349a
(6)   [eap] = handled
(6)  } #  authenticate = handled
Sending Access-Challenge Id 151 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x0129002b19001703010020255680a59fa1bcde73d46918c246d05710bb6b13d88b4aa66d37d9ac61fe19ec
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d52733d349a21ce87fd9082fb30
(6) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 152 from 127.0.0.1:35433 to 127.0.0.1:1812
length 284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x02290050190017030100205a32e40f2c28c5bf3d61f5edf9261a14a1c84178e4c6b4611ad87fbb69d1026a1703010020ab557c9e53e519e27a0dd6a20d0bab4e46d68b2b4d82c2723bc4d050aa39fe30
State = 0x75142d52733d349a21ce87fd9082fb30
Message-Authenticator = 0x83446479b94af2f217736a6f9dbc1aea
(7) # Executing section authorize from file /etc/raddb/sites-enabled/default
(7)   authorize {
(7)   filter_username filter_username {
(7)     if (User-Name != "%{tolower:%{User-Name}}")
(7) EXPAND %{tolower:%{User-Name}}
(7)    --> testuser
(7)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(7)     if (User-Name =~ / /)
(7)     if (User-Name =~ / /)  -> FALSE
(7)     if (User-Name =~ /@.*@/ )
(7)     if (User-Name =~ /@.*@/ )  -> FALSE
(7)     if (User-Name =~ /\\.\\./ )
(7)     if (User-Name =~ /\\.\\./ )  -> FALSE
(7)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(7)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(7)     if (User-Name =~ /\\.$/)
(7)     if (User-Name =~ /\\.$/)   -> FALSE
(7)     if (User-Name =~ /@\\./)
(7)     if (User-Name =~ /@\\./)   -> FALSE
(7)   } # filter_username filter_username = notfound
(7)   [chap] = noop
(7)   [mschap] = noop
(7)   [digest] = noop
(7) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix : No such realm "NULL"
(7)   [suffix] = noop
(7) eap : EAP packet type response id 41 length 80
(7) eap : Continuing tunnel setup.
(7)   [eap] = ok
(7)  } #  authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/default
(7)   authenticate {
(7) eap : Expiring EAP session with state 0x75142d52733d349a
(7) eap : Finished EAP session with state 0x75142d52733d349a
(7) eap : Previous EAP request found for state 0x75142d52733d349a, released
from the list
(7) eap : Peer sent PEAP (25)
(7) eap : EAP PEAP (25)
(7) eap : Calling eap_peap to process EAP data
(7) eap_peap : processing EAP-TLS
(7) eap_peap : eaptls_verify returned 7
(7) eap_peap : Done initial handshake
(7) eap_peap : eaptls_process returned 7
(7) eap_peap : FR_TLS_OK
(7) eap_peap : Session established.  Decoding tunneled attributes.
(7) eap_peap : Peap state WAITING FOR INNER IDENTITY
(7) eap_peap : Identity - testuser
(7) eap_peap : Got inner identity 'testuser'
(7) eap_peap : Setting default EAP type for tunneled EAP session.
(7) eap_peap : Got tunneled request
EAP-Message = 0x0229000d017465737475736572
server default {
(7) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message = 0x0229000d017465737475736572
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
server inner-tunnel {
(7) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(7)   authorize {
(7)   [chap] = noop
(7)   [mschap] = noop
(7) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(7) suffix : No such realm "NULL"
(7)   [suffix] = noop
(7)   update control {
(7) Proxy-To-Realm := 'LOCAL'
(7)   } # update control = noop
(7) eap : EAP packet type response id 41 length 13
(7) eap : EAP-Identity reply, returning 'ok' so we can short-circuit the
rest of authorize
(7)   [eap] = ok
(7)  } #  authorize = ok
(7) Found Auth-Type = EAP
(7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(7)   authenticate {
(7) eap : Peer sent Identity (1)
(7) eap : Calling eap_mschapv2 to process EAP data
(7) eap_mschapv2 : Issuing Challenge
(7) eap : New EAP session, adding 'State' attribute to reply
0xb49c07b4b4b61da5
(7)   [eap] = handled
(7)  } #  authenticate = handled
} # server inner-tunnel
(7) eap_peap : Got tunneled reply code 11
EAP-Message =
0x012a00221a012a001d105a993976d9a529545492a387efbe0abe7465737475736572
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb49c07b4b4b61da5a068aaf2f6fe2ea7
(7) eap_peap : Got tunneled reply RADIUS code 11
EAP-Message =
0x012a00221a012a001d105a993976d9a529545492a387efbe0abe7465737475736572
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb49c07b4b4b61da5a068aaf2f6fe2ea7
(7) eap_peap : Got tunneled Access-Challenge
(7) eap : New EAP session, adding 'State' attribute to reply
0x75142d52723e349a
(7)   [eap] = handled
(7)  } #  authenticate = handled
Sending Access-Challenge Id 152 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x012a004b190017030100409c99fe45815b5605ceda2642c049df3cc9371f1f607b4712d2ed156d41d101fd3f843a2daad83d62857ca9f13413b1e345b05bf0882ec1013e77927aab04b372
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d52723e349a21ce87fd9082fb30
(7) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 153 from 127.0.0.1:35433 to 127.0.0.1:1812
length 284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x022a005019001703010020371517cadfb7716ce7e2622df47593315b49a74df9eeedb0bb544a740030133f1703010020767a9d11f6a3f6037b7cd47e52bc1835947c2f84a97f9c2817e425a60a4f282c
State = 0x75142d52723e349a21ce87fd9082fb30
Message-Authenticator = 0x415e6f44c49ba4bf4f0286775e4bdadf
(8) # Executing section authorize from file /etc/raddb/sites-enabled/default
(8)   authorize {
(8)   filter_username filter_username {
(8)     if (User-Name != "%{tolower:%{User-Name}}")
(8) EXPAND %{tolower:%{User-Name}}
(8)    --> testuser
(8)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(8)     if (User-Name =~ / /)
(8)     if (User-Name =~ / /)  -> FALSE
(8)     if (User-Name =~ /@.*@/ )
(8)     if (User-Name =~ /@.*@/ )  -> FALSE
(8)     if (User-Name =~ /\\.\\./ )
(8)     if (User-Name =~ /\\.\\./ )  -> FALSE
(8)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(8)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(8)     if (User-Name =~ /\\.$/)
(8)     if (User-Name =~ /\\.$/)   -> FALSE
(8)     if (User-Name =~ /@\\./)
(8)     if (User-Name =~ /@\\./)   -> FALSE
(8)   } # filter_username filter_username = notfound
(8)   [chap] = noop
(8)   [mschap] = noop
(8)   [digest] = noop
(8) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(8) suffix : No such realm "NULL"
(8)   [suffix] = noop
(8) eap : EAP packet type response id 42 length 80
(8) eap : Continuing tunnel setup.
(8)   [eap] = ok
(8)  } #  authorize = ok
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/default
(8)   authenticate {
(8) eap : Expiring EAP session with state 0xb49c07b4b4b61da5
(8) eap : Finished EAP session with state 0x75142d52723e349a
(8) eap : Previous EAP request found for state 0x75142d52723e349a, released
from the list
(8) eap : Peer sent PEAP (25)
(8) eap : EAP PEAP (25)
(8) eap : Calling eap_peap to process EAP data
(8) eap_peap : processing EAP-TLS
(8) eap_peap : eaptls_verify returned 7
(8) eap_peap : Done initial handshake
(8) eap_peap : eaptls_process returned 7
(8) eap_peap : FR_TLS_OK
(8) eap_peap : Session established.  Decoding tunneled attributes.
(8) eap_peap : Peap state phase2
(8) eap_peap : EAP type NAK (3)
(8) eap_peap : Got tunneled request
EAP-Message = 0x022a00060304
server default {
(8) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message = 0x022a00060304
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
State = 0xb49c07b4b4b61da5a068aaf2f6fe2ea7
server inner-tunnel {
(8) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(8)   authorize {
(8)   [chap] = noop
(8)   [mschap] = noop
(8) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(8) suffix : No such realm "NULL"
(8)   [suffix] = noop
(8)   update control {
(8) Proxy-To-Realm := 'LOCAL'
(8)   } # update control = noop
(8) eap : EAP packet type response id 42 length 6
(8) eap : No EAP Start, assuming it's an on-going EAP conversation
(8)   [eap] = updated
(8) files : users: Matched entry testuser at line 6
(8)   [files] = ok
(8)   [expiration] = noop
(8)   [logintime] = noop
(8) WARNING: pap : Auth-Type already set.  Not setting to PAP
(8)   [pap] = noop
(8)  } #  authorize = updated
(8) Found Auth-Type = EAP
(8) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(8)   authenticate {
(8) eap : Expiring EAP session with state 0xb49c07b4b4b61da5
(8) eap : Finished EAP session with state 0xb49c07b4b4b61da5
(8) eap : Previous EAP request found for state 0xb49c07b4b4b61da5, released
from the list
(8) eap : Peer sent NAK (3)
(8) eap : Found mutually acceptable type MD5 (4)
(8) eap : Calling eap_md5 to process EAP data
(8) eap_md5 : Issuing MD5 Challenge
(8) eap : New EAP session, adding 'State' attribute to reply
0xb49c07b4b5b703a5
(8)   [eap] = handled
(8)  } #  authenticate = handled
} # server inner-tunnel
(8) eap_peap : Got tunneled reply code 11
EAP-Message = 0x012b0016041054a5e4fe067abef6899f461bbecdca8e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb49c07b4b5b703a5a068aaf2f6fe2ea7
(8) eap_peap : Got tunneled reply RADIUS code 11
EAP-Message = 0x012b0016041054a5e4fe067abef6899f461bbecdca8e
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xb49c07b4b5b703a5a068aaf2f6fe2ea7
(8) eap_peap : Got tunneled Access-Challenge
(8) eap : New EAP session, adding 'State' attribute to reply
0x75142d527d3f349a
(8)   [eap] = handled
(8)  } #  authenticate = handled
Sending Access-Challenge Id 153 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x012b003b190017030100301803ace2b7031f554a5f3045f5a4e34de54d852c8a1864604f360437b8eb91d38e623704bbe7ca09f07c5727b4df08ec
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d527d3f349a21ce87fd9082fb30
(8) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 154 from 127.0.0.1:35433 to 127.0.0.1:1812
length 300
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x022b006019001703010020f89ef8b062d2865199c25532e9544f009b19b5b8c664ae99d348f4c0373505b417030100300f0f5499f8fb57b855879c614af18138ae52afabd0084afc0f98f848cce153cb95d838975bd5099e22f5acaf70dba752
State = 0x75142d527d3f349a21ce87fd9082fb30
Message-Authenticator = 0xf4c69fb04b19a6db39556dd30eb15d82
(9) # Executing section authorize from file /etc/raddb/sites-enabled/default
(9)   authorize {
(9)   filter_username filter_username {
(9)     if (User-Name != "%{tolower:%{User-Name}}")
(9) EXPAND %{tolower:%{User-Name}}
(9)    --> testuser
(9)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(9)     if (User-Name =~ / /)
(9)     if (User-Name =~ / /)  -> FALSE
(9)     if (User-Name =~ /@.*@/ )
(9)     if (User-Name =~ /@.*@/ )  -> FALSE
(9)     if (User-Name =~ /\\.\\./ )
(9)     if (User-Name =~ /\\.\\./ )  -> FALSE
(9)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(9)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   -> FALSE
(9)     if (User-Name =~ /\\.$/)
(9)     if (User-Name =~ /\\.$/)   -> FALSE
(9)     if (User-Name =~ /@\\./)
(9)     if (User-Name =~ /@\\./)   -> FALSE
(9)   } # filter_username filter_username = notfound
(9)   [chap] = noop
(9)   [mschap] = noop
(9)   [digest] = noop
(9) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(9) suffix : No such realm "NULL"
(9)   [suffix] = noop
(9) eap : EAP packet type response id 43 length 96
(9) eap : Continuing tunnel setup.
(9)   [eap] = ok
(9)  } #  authorize = ok
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/default
(9)   authenticate {
(9) eap : Expiring EAP session with state 0xb49c07b4b5b703a5
(9) eap : Finished EAP session with state 0x75142d527d3f349a
(9) eap : Previous EAP request found for state 0x75142d527d3f349a, released
from the list
(9) eap : Peer sent PEAP (25)
(9) eap : EAP PEAP (25)
(9) eap : Calling eap_peap to process EAP data
(9) eap_peap : processing EAP-TLS
(9) eap_peap : eaptls_verify returned 7
(9) eap_peap : Done initial handshake
(9) eap_peap : eaptls_process returned 7
(9) eap_peap : FR_TLS_OK
(9) eap_peap : Session established.  Decoding tunneled attributes.
(9) eap_peap : Peap state phase2
(9) eap_peap : EAP type MD5 (4)
(9) eap_peap : Got tunneled request
EAP-Message = 0x022b00160410d0e28694a3730d8bde9d62bfac934546
server default {
(9) eap_peap : Setting User-Name to testuser
Sending tunneled request
EAP-Message = 0x022b00160410d0e28694a3730d8bde9d62bfac934546
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = 'testuser'
State = 0xb49c07b4b5b703a5a068aaf2f6fe2ea7
server inner-tunnel {
(9) # Executing section authorize from file
/etc/raddb/sites-enabled/inner-tunnel
(9)   authorize {
(9)   [chap] = noop
(9)   [mschap] = noop
(9) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(9) suffix : No such realm "NULL"
(9)   [suffix] = noop
(9)   update control {
(9) Proxy-To-Realm := 'LOCAL'
(9)   } # update control = noop
(9) eap : EAP packet type response id 43 length 22
(9) eap : No EAP Start, assuming it's an on-going EAP conversation
(9)   [eap] = updated
(9) files : users: Matched entry testuser at line 6
(9)   [files] = ok
(9)   [expiration] = noop
(9)   [logintime] = noop
(9) WARNING: pap : Auth-Type already set.  Not setting to PAP
(9)   [pap] = noop
(9)  } #  authorize = updated
(9) Found Auth-Type = EAP
(9) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel
(9)   authenticate {
(9) eap : Expiring EAP session with state 0xb49c07b4b5b703a5
(9) eap : Finished EAP session with state 0xb49c07b4b5b703a5
(9) eap : Previous EAP request found for state 0xb49c07b4b5b703a5, released
from the list
(9) eap : Peer sent MD5 (4)
(9) eap : EAP MD5 (4)
(9) eap : Calling eap_md5 to process EAP data
(9) eap : Freeing handler
(9)   [eap] = ok
(9)  } #  authenticate = ok
(9) # Executing section post-auth from file
/etc/raddb/sites-enabled/inner-tunnel
(9)  (null) post-auth { ... } # empty sub-section is ignored
} # server inner-tunnel
(9) eap_peap : Got tunneled reply code 2
EAP-Message = 0x032b0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(9) eap_peap : Got tunneled reply RADIUS code 2
EAP-Message = 0x032b0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(9) eap_peap : Tunneled authentication was successful.
(9) eap_peap : SUCCESS
(9) eap : New EAP session, adding 'State' attribute to reply
0x75142d527c38349a
(9)   [eap] = handled
(9)  } #  authenticate = handled
Sending Access-Challenge Id 154 from 127.0.0.1:1812 to 127.0.0.1:35433
EAP-Message =
0x012c002b190017030100201c794248beaed5d47656ed96e0f584df86d2bdc19b6b290ac5745f0cfa00014f
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x75142d527c38349a21ce87fd9082fb30
(9) Finished request
Waking up in 0.2 seconds.
Received Access-Request Id 155 from 127.0.0.1:35433 to 127.0.0.1:1812
length 284
User-Name = 'testuser'
NAS-IP-Address = 127.0.0.1
Called-Station-Id = '04-F0-21-17-94-44:ac-vap-ch149'
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
Calling-Station-Id = '04-F0-21-E7-56-41'
Connect-Info = 'CONNECT 54Mbps 802.11a'
Acct-Session-Id = '55DB92D7-0000000E'
X-Ascend-Home-Agent-UDP-Port = 1027076
X-Ascend-Multilink-ID = 1027074
X-Ascend-Num-In-Multilink = 1027073
Framed-MTU = 1400
EAP-Message =
0x022c00501900170301002038ac1de88b2c342a78ea154199764911ff5996f9729a48977fb843a34f09c5e517030100205192878ad23f1cd8c258406269202c80a06321ce7d9d2cf09216ba10e497f70e
State = 0x75142d527c38349a21ce87fd9082fb30
Message-Authenticator = 0xa5dbb12918db9840852a3b207336c489
(10) # Executing section authorize from file
/etc/raddb/sites-enabled/default
(10)   authorize {
(10)   filter_username filter_username {
(10)     if (User-Name != "%{tolower:%{User-Name}}")
(10) EXPAND %{tolower:%{User-Name}}
(10)    --> testuser
(10)     if (User-Name != "%{tolower:%{User-Name}}")  -> FALSE
(10)     if (User-Name =~ / /)
(10)     if (User-Name =~ / /)  -> FALSE
(10)     if (User-Name =~ /@.*@/ )
(10)     if (User-Name =~ /@.*@/ )  -> FALSE
(10)     if (User-Name =~ /\\.\\./ )
(10)     if (User-Name =~ /\\.\\./ )  -> FALSE
(10)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))
(10)     if ((User-Name =~ /@/) && (User-Name !~ /@(.+)\\.(.+)$/))   ->
FALSE
(10)     if (User-Name =~ /\\.$/)
(10)     if (User-Name =~ /\\.$/)   -> FALSE
(10)     if (User-Name =~ /@\\./)
(10)     if (User-Name =~ /@\\./)   -> FALSE
(10)   } # filter_username filter_username = notfound
(10)   [chap] = noop
(10)   [mschap] = noop
(10)   [digest] = noop
(10) suffix : No '@' in User-Name = "testuser", looking up realm NULL
(10) suffix : No such realm "NULL"
(10)   [suffix] = noop
(10) eap : EAP packet type response id 44 length 80
(10) eap : Continuing tunnel setup.
(10)   [eap] = ok
(10)  } #  authorize = ok
(10) Found Auth-Type = EAP
(10) # Executing group from file /etc/raddb/sites-enabled/default
(10)   authenticate {
(10) eap : Expiring EAP session with state 0x75142d527c38349a
(10) eap : Finished EAP session with state 0x75142d527c38349a
(10) eap : Previous EAP request found for state 0x75142d527c38349a,
released from the list
(10) eap : Peer sent PEAP (25)
(10) eap : EAP PEAP (25)
(10) eap : Calling eap_peap to process EAP data
(10) eap_peap : processing EAP-TLS
(10) eap_peap : eaptls_verify returned 7
(10) eap_peap : Done initial handshake
(10) eap_peap : eaptls_process returned 7
(10) eap_peap : FR_TLS_OK
(10) eap_peap : Session established.  Decoding tunneled attributes.
(10) eap_peap : Peap state send tlv success
(10) eap_peap : Received EAP-TLV response.
(10) eap_peap : Success
(10) WARNING: eap_peap : No information to cache: session caching will be
disabled for session
9c99e0670e62c0ae5c46eb697f0d23bae0464fa0de77524d9d8b6cc578ccbc16
  SSL: Removing session
9c99e0670e62c0ae5c46eb697f0d23bae0464fa0de77524d9d8b6cc578ccbc16 from the
cache
(10) eap : Freeing handler
(10)   [eap] = ok
(10)  } #  authenticate = ok
(10) # Executing section post-auth from file
/etc/raddb/sites-enabled/default
(10)   post-auth {
(10)   [exec] = noop
(10)   remove_reply_message_if_eap remove_reply_message_if_eap {
(10)     if (reply:EAP-Message && reply:Reply-Message)
(10)     if (reply:EAP-Message && reply:Reply-Message)  -> FALSE
(10)    else else {
(10)     [noop] = noop
(10)    } # else else = noop
(10)   } # remove_reply_message_if_eap remove_reply_message_if_eap = noop
(10)  } #  post-auth = noop
Sending Access-Accept Id 155 from 127.0.0.1:1812 to 127.0.0.1:35433
MS-MPPE-Recv-Key =
0x584710d2f8284e6b32d9566ff1985ba909f3922739a6b3f4f25d0a99453c0010
MS-MPPE-Send-Key =
0xf66229fdb3ca9b7052f39d26475ffa93328cc45235ab3dc5e9b191a591159380
EAP-Message = 0x032c0004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = 'testuser'
(10) Finished request
Waking up in 0.2 seconds.
Waking up in 4.5 seconds.
(0) Cleaning up request packet ID 145 with timestamp +13
(1) Cleaning up request packet ID 146 with timestamp +13
(2) Cleaning up request packet ID 147 with timestamp +13
(3) Cleaning up request packet ID 148 with timestamp +13
(4) Cleaning up request packet ID 149 with timestamp +13
(5) Cleaning up request packet ID 150 with timestamp +13
(6) Cleaning up request packet ID 151 with timestamp +13
(7) Cleaning up request packet ID 152 with timestamp +13
(8) Cleaning up request packet ID 153 with timestamp +13
(9) Cleaning up request packet ID 154 with timestamp +13
(10) Cleaning up request packet ID 155 with timestamp +13
Ready to process requests.

Re: help with configs for eap-md5

Isaac Konikoff