That was it. Removed a few hash marks in the peap and tls config and it ran. Thank you for the quick responses everyone. Regards Christian
-----Original Message----- From: freeradius-users-bounces+chr.ejlertsen=has.dk@lists.freeradius.org [mailto:freeradius-users- bounces+chr.ejlertsen=has.dk@lists.freeradius.org] On Behalf Of tnt@kalik.co.yu Sent: 14. maj 2007 21:30 To: FreeRadius users mailing list Subject: RE: Cisco Access Points
You haven't configured peap and tls in eap.conf.
Ivan Kalik Kalik Informatika ISP
Dana 14/5/2007, "Christian Ejlertsen" <chr.ejlertsen@has.dk> piše:
This is what I get.
triagia ~ # radiusd -A -X Starting - reading configuration files ... reread_config: reading radiusd.conf Config: including file: /etc/raddb/proxy.conf Config: including file: /etc/raddb/clients.conf Config: including file: /etc/raddb/snmp.conf Config: including file: /etc/raddb/eap.conf Config: including file: /etc/raddb/sql.conf main: prefix = "/usr" main: localstatedir = "/var" main: logdir = "/var/log/radius" main: libdir = "/usr/lib" main: radacctdir = "/var/log/radius/radacct" main: hostname_lookups = no main: max_request_time = 30 main: cleanup_delay = 5 main: max_requests = 1024 main: delete_blocked_requests = 0 main: port = 0 main: allow_core_dumps = no main: log_stripped_names = no main: log_file = "/var/log/radius/radius.log" main: log_auth = no main: log_auth_badpass = no main: log_auth_goodpass = no main: pidfile = "/var/run/radiusd/radiusd.pid" main: user = "radiusd" main: group = "radiusd" main: usercollide = no main: lower_user = "no" main: lower_pass = "no" main: nospace_user = "no" main: nospace_pass = "no" main: checkrad = "/usr/sbin/checkrad" main: proxy_requests = yes proxy: retry_delay = 5 proxy: retry_count = 3 proxy: synchronous = no proxy: default_fallback = yes proxy: dead_time = 120 proxy: post_proxy_authorize = no proxy: wake_all_if_all_dead = no security: max_attributes = 200 security: reject_delay = 1 security: status_server = no main: debug_level = 0 read_config_files: reading dictionary read_config_files: reading naslist Using deprecated naslist file. Support for this will go away soon. read_config_files: reading clients read_config_files: reading realms radiusd: entering modules setup Module: Library search path is /usr/lib Module: Loaded exec exec: wait = yes exec: program = "(null)" exec: input_pairs = "request" exec: output_pairs = "(null)" exec: packet_type = "(null)" rlm_exec: Wait=yes but no output defined. Did you mean output=none? Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt" pap: auto_header = no Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes mschap: require_encryption = no mschap: require_strong = no mschap: with_ntdomain_hack = no mschap: passwd = "(null)" mschap: ntlm_auth = "(null)" Module: Instantiated mschap (mschap) Module: Loaded System unix: cache = no unix: passwd = "(null)" unix: shadow = "(null)" unix: group = "(null)" unix: radwtmp = "/var/log/radius/radwtmp" unix: usegroup = no unix: cache_reload = 600 Module: Instantiated unix (unix) Module: Loaded eap eap: default_eap_type = "md5" eap: timer_expire = 60 eap: ignore_unknown_eap_types = no eap: cisco_accounting_username_bug = no rlm_eap: Loaded and initialized type md5 rlm_eap: Loaded and initialized type leap gtc: challenge = "Password: " gtc: auth_type = "PAP" rlm_eap: Loaded and initialized type gtc mschapv2: with_ntdomain_hack = no rlm_eap: Loaded and initialized type mschapv2 Module: Instantiated eap (eap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups" preprocess: hints = "/etc/raddb/hints" preprocess: with_ascend_hack = no preprocess: ascend_channels_per_line = 23 preprocess: with_ntdomain_hack = no preprocess: with_specialix_jetstream_hack = no preprocess: with_cisco_vsa_hack = no preprocess: with_alvarion_vsa_hack = no Module: Instantiated preprocess (preprocess) Module: Loaded realm realm: format = "suffix" realm: delimiter = "@" realm: ignore_default = no realm: ignore_null = no Module: Instantiated realm (suffix) Module: Loaded files files: usersfile = "/etc/raddb/users" files: acctusersfile = "/etc/raddb/acct_users" files: preproxy_usersfile = "/etc/raddb/preproxy_users" files: compat = "no" [/etc/raddb/users]:65 WARNING! Check item "MS-CHAP-Use-NTLM-Auth" ?found in reply item list for user "wifiuser". ?This attribute MUST go on the first line with the other check items Module: Instantiated files (files) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, Client-IP-Address, NAS-Port" Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile = "/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" detail: detailperm = 384 detail: dirperm = 493 detail: locking = no Module: Instantiated detail (detail) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp" radutmp: username = "%{User-Name}" radutmp: case_sensitive = yes radutmp: check_with_nas = yes radutmp: perm = 384 radutmp: callerid = yes Module: Instantiated radutmp (radutmp) Listening on authentication *:1812 Listening on accounting *:1813 Ready to process requests. rad_recv: Access-Request packet from host 192.168.150.250:1645, id=11, length=135 User-Name = "wifiuser" Framed-MTU = 1400 Called-Station-Id = "0017.0e86.2cb0" Calling-Station-Id = "000e.35e6.0bd0" Service-Type = Login-User Message-Authenticator = 0xcef467e8a3b24b5c3eef6b1ebfea8bb1 EAP-Message = 0x0202000d017769666975736572 NAS-Port-Type = Wireless-802.11 NAS-Port = 346 NAS-IP-Address = 192.168.150.250 NAS-Identifier = "VOICE-AP" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "wifiuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 2 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry wifiuser at line 65 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 11 to 192.168.150.250 port 1645 EAP-Message = 0x010300160410ec940a7577c4d10df211a4ddfebde7ca Message-Authenticator = 0x00000000000000000000000000000000 State = 0x977d6e6a369cd2ece8aca6a5b16ab920 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.150.250:1645, id=12, length=146 User-Name = "wifiuser" Framed-MTU = 1400 Called-Station-Id = "0017.0e86.2cb0" Calling-Station-Id = "000e.35e6.0bd0" Service-Type = Login-User Message-Authenticator = 0x20d261fff76441857c609d0742b6ce64 EAP-Message = 0x020300060319 NAS-Port-Type = Wireless-802.11 NAS-Port = 346 State = 0x977d6e6a369cd2ece8aca6a5b16ab920 NAS-IP-Address = 192.168.150.250 NAS-Identifier = "VOICE-AP" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "wifiuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 3 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry wifiuser at line 65 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: EAP-NAK asked for EAP-Type/peap rlm_eap: No such EAP type peap rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 1 modcall: leaving group authenticate (returns invalid) for request 1 auth: Failed to validate the user. Delaying request 1 for 1 seconds Finished request 1 Going to the next request Waking up in 6 seconds... rad_recv: Access-Request packet from host 192.168.150.250:1645, id=12, length=146 Sending Access-Reject of id 12 to 192.168.150.250 port 1645 EAP-Message = 0x04030004 Message-Authenticator = 0x00000000000000000000000000000000 --- Walking the entire request list --- Waking up in 1 seconds... rad_recv: Access-Request packet from host 192.168.150.250:1645, id=13, length=135 User-Name = "wifiuser" Framed-MTU = 1400 Called-Station-Id = "0017.0e86.2cb0" Calling-Station-Id = "000e.35e6.0bd0" Service-Type = Login-User Message-Authenticator = 0xccf58d6473294ed5df1a339437f920a6 EAP-Message = 0x0201000d017769666975736572 NAS-Port-Type = Wireless-802.11 NAS-Port = 347 NAS-IP-Address = 192.168.150.250 NAS-Identifier = "VOICE-AP" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "wifiuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 1 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry wifiuser at line 65 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 13 to 192.168.150.250 port 1645 EAP-Message = 0x0102001604104ca975f3dc58a7f606b7e2201a8ab6c9 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x1bdaf4a324a3a44870d446bb2de9dac1 Finished request 2 Going to the next request Cleaning up request 0 ID 11 with timestamp 4648921b Cleaning up request 1 ID 12 with timestamp 4648921b Waking up in 1 seconds... rad_recv: Access-Request packet from host 192.168.150.250:1645, id=14, length=135 User-Name = "wifiuser" Framed-MTU = 1400 Called-Station-Id = "0017.0e86.2cb0" Calling-Station-Id = "000e.35e6.0bd0" Service-Type = Login-User Message-Authenticator = 0x078522217ed23ba2b860e12164af494c EAP-Message = 0x0203000d017769666975736572 NAS-Port-Type = Wireless-802.11 NAS-Port = 347 NAS-IP-Address = 192.168.150.250 NAS-Identifier = "VOICE-AP" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "wifiuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 3 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry wifiuser at line 65 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: EAP Identity rlm_eap: processing type md5 rlm_eap_md5: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 14 to 192.168.150.250 port 1645 EAP-Message = 0x010400160410da2d678cd3e4a1a4339bc82f9880c72a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x807cb82738bed6f381363d412f391090 Finished request 3 Going to the next request Waking up in 1 seconds... rad_recv: Access-Request packet from host 192.168.150.250:1645, id=15, length=146 User-Name = "wifiuser" Framed-MTU = 1400 Called-Station-Id = "0017.0e86.2cb0" Calling-Station-Id = "000e.35e6.0bd0" Service-Type = Login-User Message-Authenticator = 0x51d62b2354da5f1a1f4dcf989ac44156 EAP-Message = 0x020400060319 NAS-Port-Type = Wireless-802.11 NAS-Port = 347 State = 0x807cb82738bed6f381363d412f391090 NAS-IP-Address = 192.168.150.250 NAS-Identifier = "VOICE-AP" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '@' in User-Name = "wifiuser", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry wifiuser at line 65 modcall[authorize]: module "files" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP NAK rlm_eap: EAP-NAK asked for EAP-Type/peap rlm_eap: No such EAP type peap rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 4 modcall: leaving group authenticate (returns invalid) for request 4 auth: Failed to validate the user. Delaying request 4 for 1 seconds Finished request 4 Going to the next request Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 15 to 192.168.150.250 port 1645 EAP-Message = 0x04040004 Message-Authenticator = 0x00000000000000000000000000000000 Waking up in 4 seconds... --- Walking the entire request list --- Cleaning up request 2 ID 13 with timestamp 46489220 Cleaning up request 3 ID 14 with timestamp 46489220 Cleaning up request 4 ID 15 with timestamp 46489220 Nothing to do. Sleeping until we see a request.
-----Original Message----- From: freeradius-users- bounces+chr.ejlertsen=has.dk@lists.freeradius.org [mailto:freeradius-users- bounces+chr.ejlertsen=has.dk@lists.freeradius.org] On Behalf Of Riccardo Veraldi Sent: 14. maj 2007 18:37 To: FreeRadius users mailing list Subject: Re: Cisco Access Points
radiusd -A -X
an tell what you see on the radius server
thanks
Rick
Christian Ejlertsen wrote:
Hello to all
I'm very new at this whole radius deal so I hope I can find a kind soul that could help me with this setup.
I'm sorry if this is described somewhere I've been looking around and I don't seem to find this.
For now i'm trying to get a very simple setup to work
I have a Cisco 1121G AP which I want to use with my freeeradius
server
EAP/PEAP
Nothing fancy just a user local on the freeradius server
I can't get the user credentials to authenticate
It's a Windows machine that I trying to authenticate with and the wireless netcard is set to use EAP (PEAP), no certificates and EAP-MSCHAPv2 as authentication method.
I have a user in the radius users file called
wifiuser User-Password := "SomePasswordHere"
MS-CHAP-Use-NTLM-Auth := 0
In the clients.conf I have
client 192.168.150.250 {
secret = SomePasswordHere
shortname = CiscoAP1121
nastype = cisco
}
In the eap.conf I unmarked
default_eap_type = mschapv2
Then I read this in the eap.conf
# This module is the *Microsoft* implementation of MS-CHAPv2
# in EAP. There is another (incompatible) implementation
# of MS-CHAPv2 in EAP by Cisco, which FreeRADIUS does not
# currently support.
#
mschapv2 {
}
Does this apply to my setup and if so what is an alternative to what I'm trying todo?
When I debug on the cisco AP I get the following lines that are odd (Full log in bottom of the mail)
*Apr 23 19:50:57.298: RADIUS: AAA Unsupported [263] 12
*Apr 23 19:50:57.299: RADIUS: 57 49 46 49 5F 50 52 49 56 41 [WIFI_PRIVA]
*Apr 23 19:50:57.299: RADIUS: AAA Unsupported [156] 3
*Apr 23 19:50:57.299: RADIUS: 33
It's a pretty standard Freeradius config havn't done anything to it but added some users and one other client.
Thank you in advance
Christian
-------- LOGS BELOW ---------
All I get in radius.log is
Mon May 14 19:50:20 2007 : Info: rlm_eap_md5: Issuing Challenge
--------------- CISCO DEBUG RADIUS -----------------------
*Apr 23 19:50:57.288: RADIUS/ENCODE(000000D3):Orig. component type = DOT11
*Apr 23 19:50:57.288: RADIUS: AAA Unsupported [263] 12
*Apr 23 19:50:57.288: RADIUS: 57 49 46 49 5F 50 52 49 56 41 [WIFI_PRIVA]
*Apr 23 19:50:57.288: RADIUS: AAA Unsupported [156] 3
*Apr 23 19:50:57.288: RADIUS: 33 [3]
*Apr 23 19:50:57.288: RADIUS(000000D3): Storing nasport 336 in rad_db
*Apr 23 19:50:57.289: RADIUS(000000D3): Config NAS IP: 192.168.150.250
*Apr 23 19:50:57.289: RADIUS/ENCODE(000000D3): acct_session_id: 82
*Apr 23 19:50:57.289: RADIUS(000000D3): Config NAS IP: 192.168.150.250
*Apr 23 19:50:57.289: RADIUS(000000D3): sending
*Apr 23 19:50:57.290: RADIUS(000000D3): Send Access-Request to 192.168.150.1:1812 id 1645/33, len 135
*Apr 23 19:50:57.290: RADIUS: authenticator EA B6 33 72 6C 09 8E CF - 84 B1 60 BB 54 B8 55 BF
*Apr 23 19:50:57.290: RADIUS: User-Name [1] 10 "wifiuser"
*Apr 23 19:50:57.290: RADIUS: Framed-MTU [12] 6 1400
*Apr 23 19:50:57.290: RADIUS: Called-Station-Id [30] 16 "0017.0e86.2cb0"
*Apr 23 19:50:57.290: RADIUS: Calling-Station-Id [31] 16 "000e.35e6.0bd0"
*Apr 23 19:50:57.290: RADIUS: Service-Type [6] 6 Login [1]
*Apr 23 19:50:57.291: RADIUS: Message-Authenticato[80] 18 *
*Apr 23 19:50:57.291: RADIUS: EAP-Message [79] 15
*Apr 23 19:50:57.291: RADIUS: 02 02 00 0D 01 77 69 66 69 75 73 65 72 [?????wifiuser]
*Apr 23 19:50:57.291: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]
*Apr 23 19:50:57.292: RADIUS: NAS-Port [5] 6 336
*Apr 23 19:50:57.292: RADIUS: NAS-IP-Address [4] 6 192.168.150.250
*Apr 23 19:50:57.292: RADIUS: Nas-Identifier [32] 10 "VOICE-AP"
*Apr 23 19:50:57.293: RADIUS: Received from id 1645/33 192.168.150.1:1812, Access-Challenge, len 80
*Apr 23 19:50:57.294: RADIUS: authenticator F9 A4 EE 6B E1 5A 8A AB - F5 BD 19 CA 96 33 48 CA
*Apr 23 19:50:57.294: RADIUS: EAP-Message [79] 24
*Apr 23 19:50:57.294: RADIUS: 01 03 00 16 04 10 41 8F DB 50 B7 94 9A 30 DF CE [??????A??P???0??]
*Apr 23 19:50:57.294: RADIUS: 60 DA D1 51 EB 08 [`??Q??]
*Apr 23 19:50:57.294: RADIUS: Message-Authenticato[80] 18 *
*Apr 23 19:50:57.294: RADIUS: State [24] 18
*Apr 23 19:50:57.295: RADIUS: DE 53 56 01 A4 DC 17 CD C0 B9 E0 46 DF 21 54 FB [?SV????????F?!T?]
*Apr 23 19:50:57.295: RADIUS(000000D3): Received from id 1645/33
*Apr 23 19:50:57.296: RADIUS/DECODE: EAP-Message fragments, 22, total 22 bytes
*Apr 23 19:50:57.298: RADIUS/ENCODE(000000D3):Orig. component type = DOT11
*Apr 23 19:50:57.298: RADIUS: AAA Unsupported [263] 12
*Apr 23 19:50:57.299: RADIUS: 57 49 46 49 5F 50 52 49 56 41 [WIFI_PRIVA]
*Apr 23 19:50:57.299: RADIUS: AAA Unsupported [156] 3
*Apr 23 19:50:57.299: RADIUS: 33 [3]
*Apr 23 19:50:57.299: RADIUS(000000D3): Using existing nas_port 336
*Apr 23 19:50:57.300: RADIUS(000000D3): Config NAS IP: 192.168.150.250
*Apr 23 19:50:57.300: RADIUS/ENCODE(000000D3): acct_session_id: 82
*Apr 23 19:50:57.300: RADIUS(000000D3): Config NAS IP: 192.168.150.250
*Apr 23 19:50:57.300: RADIUS(000000D3): sending
*Apr 23 19:50:57.300: RADIUS(000000D3): Send Access-Request to 192.168.150.1:1812 id 1645/34, len 146
*Apr 23 19:50:57.300: RADIUS: authenticator 56 F3 92 78 A7 7A 09 FA - 99 29 51 99 7D E0 9F B3
*Apr 23 19:50:57.301: RADIUS: User-Name [1] 10 "wifiuser"
*Apr 23 19:50:57.301: RADIUS: Framed-MTU [12] 6 1400
*Apr 23 19:50:57.301: RADIUS: Called-Station-Id [30] 16 "0017.0e86.2cb0"
*Apr 23 19:50:57.301: RADIUS: Calling-Station-Id [31] 16 "000e.35e6.0bd0"
*Apr 23 19:50:57.301: RADIUS: Service-Type [6] 6 Login [1]
*Apr 23 19:50:57.302: RADIUS: Message-Authenticato[80] 18 *
*Apr 23 19:50:57.302: RADIUS: EAP-Message [79] 8
*Apr 23 19:50:57.302: RADIUS: 02 03 00 06 03 19 [??????]
*Apr 23 19:50:57.302: RADIUS: NAS-Port-Type [61] 6 802.11 wireless [19]
*Apr 23 19:50:57.302: RADIUS: NAS-Port [5] 6 336
*Apr 23 19:50:57.302: RADIUS: State [24] 18
*Apr 23 19:50:57.302: RADIUS: DE 53 56 01 A4 DC 17 CD C0 B9 E0 46 DF 21 54 FB [?SV????????F?!T?]
*Apr 23 19:50:57.302: RADIUS: NAS-IP-Address [4] 6 192.168.150.250
*Apr 23 19:50:57.303: RADIUS: Nas-Identifier [32] 10 "VOICE-AP"
*Apr 23 19:51:02.527: RADIUS: no sg in radius-timers: ctx 0xC2506C sg 0x0000
*Apr 23 19:51:02.527: RADIUS: Retransmit to (192.168.150.1:1812,1813) for id 1645/34
*Apr 23 19:51:02.527: RADIUS: Received from id 1645/34 192.168.150.1:1812, Access-Reject, len 44
*Apr 23 19:51:02.528: RADIUS: authenticator 27 C2 B4 DD 14 F9 C3 C0 - DF 88 BD B5 DC 0D 6C 63
*Apr 23 19:51:02.528: RADIUS: EAP-Message [79] 6
*Apr 23 19:51:02.528: RADIUS: 04 03 00 04 [????]
*Apr 23 19:51:02.528: RADIUS: Message-Authenticato[80] 18 *
*Apr 23 19:51:02.529: RADIUS(000000D3): Received from id 1645/34
*Apr 23 19:51:02.529: RADIUS/DECODE: EAP-Message fragments, 4, total 4 bytes
------------------------ CISCO DEBUG RADIUS END ---------------------
---------------------------------------------------------------------
- List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html