tnt@kalik.net pisze:
But how to configure freeradius to work in this scenario: - freeradius check if it has proper mac addres in its users.conf, if it has it assign the proper vlan (it works !)
Yes.
- if it doesnt find a mac in a file it assign vlan for examle 15 (I dont know how to configure that in freeradius)
You don't. You configure that on the switch - if mac is not authenticated put the port into the guest VLAN.
You can do that in freeradius, but should avoid it (it will interfere with other types of authentication):
DEFAULT Auth-Type = Accept guest VLAN configuration
You would put that entry *after* all others in users file.
Ivan Kalik Kalik Informatika ISP
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
Hi I put thin on the end of users.conf DEFAULT Auth-Type = Accept Fall-Through = Yes, Tunnel-Medium-Type = 6, Tunnel-Private-Group-Id := 250, Tunnel-Type = VLAN But the resultis still the same, i've got this in debug rad_recv: Access-Request packet from host 10.77.24.37:5002, id=129, length=219 User-Name = "00-11-25-b8-df-42" User-Password = "00-11-25-b8-df-42" NAS-IP-Address = 10.77.24.37 NAS-Identifier = "001cc5b48702" NAS-Port = 33587215 NAS-Port-Id = "unit=2;subslot=0;port=8;vlanid=15" NAS-Port-Type = Ethernet Service-Type = Framed-User Framed-Protocol = PPP Calling-Station-Id = "0011-25b8-df42" Vendor-25506-Attr-26 = 0x0000018a Vendor-25506-Attr-255 = 0x34353030 Vendor-25506-Attr-60 = 0x302e302e302e302030303a31313a32353a62383a64663a3432 Vendor-25506-Attr-59 = 0x38e68c62 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "00-11-25-b8-df-42", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 2 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 171 users: Matched entry DEFAULT at line 183 modcall[authorize]: module "files" returns ok for request 2 rlm_pap: WARNING! No "known good" password found for the user. Authentication may fail because of this. modcall[authorize]: module "pap" returns noop for request 2 modcall: leaving group authorize (returns ok) for request 2 rad_check_password: Found Auth-Type System auth: type "System" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 modcall[authenticate]: module "unix" returns notfound for request 2 modcall: leaving group authenticate (returns notfound) for request 2 auth: Failed to validate the user Login incorrect: [00-11-25-b8-df-42] (from client admin-vlan-2 port 33587215 cli 0011-25b8-df42) Delaying request 1 for 1 seconds Please help