On 11/02/2017 17:01, Jan-Christoph Fuchs wrote:
Now I have changed to Unifi AP (Unifi Security Gateway Pro, Unifi Switch US-24 POE Unifi AP Pro) and the dynamic VLAN assignment will not work anymore. When I try to connect to the WPA2 Enterprise WLAN, credentials are accepted but I always been put to default VLAN.
Which exact model of AP? Also, are you running with 3.7.x firmware and configured with the 5.x controller? I had this working with the 1st gen Unifi Pro (the round one). But when I tried with the Unifi Pro AC (square one), it ignored the attributes. I reported the problem but didn't get any response: https://community.ubnt.com/t5/UniFi-Wireless/UAP-AC-and-dynamic-VLAN-assignm... I suspect it's a chipset difference. Try ssh'ing into your AP, and doing grep driver /etc/aaa*.cfg I think I saw "broadcom" for the Pro AC, but "atheros" for the Pro. I also now have a Unifi AC Lite (also "atheros") and that works fine: 17:32:05.943220 f8:e0:79:39:9e:6c > ff:ff:ff:ff:ff:ff, ethertype 802.1Q (0x8100), length 360: vlan 255, p 0, ethertype IPv4, 0.0.0.0.68 > 255.255.255.255.67: BOOTP/DHCP, Request from f8:e0:79:39:9e:6c, length 314