Re: Freeradius-Users Digest, Vol 165, Issue 71

28 Jan 2019


      and first check that you config works with pure password and after that add
google authenticator. (ie. test config without google authenticator enabled)

Eero

On Mon, Jan 28, 2019 at 9:49 AM Eero Volotinen <eero.volotinen@iki.fi>
wrote:
...
Well. try removing this:
try removing this line
DEFAULT Group == "disabled", Auth-Type := Reject
                Reply-Message = "Your account has been disabled."
and keep that pam line in config file..
Check that user password is correct and add some more debug to pam_google
authenticator line like adding debug *) switch to it and then check out pam
logging..
https://github.com/google/google-authenticator-libpam/blob/master/man/pam_go...
Eero
On Mon, Jan 28, 2019 at 9:37 AM Soklang Sum <soklang.sum@cambotech.com>
wrote:
...
Dear Eero Volotinen,
Can you give me more details the guide its work or link preference how to
do it?
My problem in this step:
# vi /etc/raddb/users
DEFAULT Group == "disabled", Auth-Type := Reject
                Reply-Message = "Your account has been disabled."
DEFAULT Auth-Type := PAM
When I enable the step as mention above, it always rejected.
This is RADIUS Debugs in my attachment file.
-----Original Message-----
From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
cambotech.com@lists.freeradius.org> On Behalf Of
freeradius-users-request@lists.freeradius.org
Sent: Monday, January 28, 2019 2:13 PM
To: freeradius-users@lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 165, Issue 71
Send Freeradius-Users mailing list submissions to
        freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
        freeradius-users-request@lists.freeradius.org
You can reach the person managing the list at
        freeradius-users-owner@lists.freeradius.org
When replying, please edit your Subject line so it is more specific than
"Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Re: Contents of Freeradius-Users digest...Google
      Authenticator (Eero Volotinen)
----------------------------------------------------------------------
Message: 1
Date: Mon, 28 Jan 2019 09:12:17 +0200
From: Eero Volotinen <eero.volotinen@iki.fi>
To: FreeRadius users mailing list
        <freeradius-users@lists.freeradius.org>,
soklang.sum@cambotech.com
Subject: Re: Contents of Freeradius-Users digest...Google
        Authenticator
Message-ID:
        <CABzZrXdo9ExvdiNDjo5485NKnjp=
QfaZfwhU+GdMVO7V9i592g@mail.gmail.com>
Content-Type: text/plain; charset="UTF-8"
works fine. remember to run freeradius as root or else it cannot access
google authenticator files
Eero
On Mon, Jan 28, 2019, 09:09 Soklang Sum <soklang.sum@cambotech.com wrote:
...
Dear Team Freeradius,
I would like to ask about FreeRADIUS work with google authenticator
(2FA) or not?
I have tried to install freeRADIUS with google authenticator but it
doesn't work, when I try install following the guideline any website
like https://networkjutsu.com/freeradius-google-authenticator/ it
always rejected.
So that why I want to make sure from team expertise freeRADIUS it work
with google authenticator or not?
But I saw in the guideline it works but for me never work.
Please help feedback soon as possible.
Thanks
-----Original Message-----
From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
cambotech.com@lists.freeradius.org> On Behalf Of
freeradius-users-request@lists.freeradius.org
Sent: Monday, January 28, 2019 11:42 AM
To: freeradius-users@lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 165, Issue 69
Send Freeradius-Users mailing list submissions to
        freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
        freeradius-users-request@lists.freeradius.org
You can reach the person managing the list at
        freeradius-users-owner@lists.freeradius.org
When replying, please edit your Subject line so it is more specific
than
"Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. EAP-GTC w/ "PAP-like" LDAP authentication (Ian Pilcher)
   2. Re: EAP-GTC w/ "PAP-like" LDAP authentication (Alan DeKok)
   3. Multiple UserDN for different LDAPs (diego.barzon@tiscali.it)
   4. Freeradius-Users Digest, Vol 165, Issue 68 (Soklang Sum)
   5. radius accounting issue. (slnarayanan@nitt.edu)
----------------------------------------------------------------------
Message: 1
Date: Sun, 27 Jan 2019 11:43:12 -0600
From: Ian Pilcher <arequipeno@gmail.com>
To: freeradius-users@lists.freeradius.org
Subject: EAP-GTC w/ "PAP-like" LDAP authentication
Message-ID: <q2kqjg$4fa3$1@blaine.gmane.org>
Content-Type: text/plain; charset=utf-8; format=flowed
I am struggling to find documentation of how to set up $SUBJECT.
I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC
using a file-based test user, but the number of different protocols
and configurations supported and documented in the config files means
that I haven't been able to figure out how to achieve what I want.
Any hints, links, etc. would be appreciated.
Thanks!
--
========================================================================
Ian Pilcher
arequipeno@gmail.com
-------- "I grew up before Mark Zuckerberg invented friendship"
--------
======================================================================
==
------------------------------
Message: 2
Date: Sun, 27 Jan 2019 14:17:58 -0500
From: Alan DeKok <aland@deployingradius.com>
To: FreeRadius users mailing list
        <freeradius-users@lists.freeradius.org>
Subject: Re: EAP-GTC w/ "PAP-like" LDAP authentication
Message-ID: <165EB1A7-2D19-4AAD-BD48-719D157BC5C5@deployingradius.com>
Content-Type: text/plain;       charset=us-ascii
On Jan 27, 2019, at 12:43 PM, Ian Pilcher <arequipeno@gmail.com> wrote:
...
I am struggling to find documentation of how to set up $SUBJECT.
I've got FreeRADIUS working with both PEAP/MSCHAPv2 and (P)EAP-GTC
using a file-based test user, but the number of different protocols
and configurations supported and documented in the config files
means that I haven't been able to figure out how to achieve what I
want.
(a) Make sure PEAP works with certificates.
(b) configure and enable LDAP.  See mods-available/ldap
Once the LDAP module is available, the server will automatically use
it.
And, the server will automatically grab passwords from LDAP.  And,
the server will automatically use those passwords to do EAP-GTC.
It really is that easy.  The key thing is to *let the server do the
work*.  Don't try to "force" a particular kind of authentication.  EAP
doesn't work that way.
If you're using Active Directory, it's harder.  Because Active
Directory isn't a real LDAP server.
It also helps to describe what you've done, what happened, and why
you think it's wrong.  Otherwise, we're limited to:
Q: I tried stuff and it doesn't work.  What do I do?
A: Try different stuff
Which isn't helpful to anyone.  Better questions means better answers.
Alan DeKok.
------------------------------
Message: 3
Date: Mon, 28 Jan 2019 00:27:28 +0100
From: diego.barzon@tiscali.it
To: <freeradius-users@lists.freeradius.org>
Subject: Multiple UserDN for different LDAPs
Message-ID: <a5fefc494d4f1514bf2d35eb706b2edb@tiscali.it>
Content-Type: text/plain; charset=UTF-8
Hi all,
 here's the problem.
I need to authenticate against 2
different LDAP servers, populated with different data. I don't need
specific information (like group memberships or so): trying to bind
with the credentials is enough.
In 'authorize' I set Auth to LDAP and in authenticate I put something
like this:
ldap1{
 fail = 1
 invalid = 2
reject = 3
}
if (!ok) {
 ldap2
}
ldap1 and ldap2 configurations are on
separate files, they are different in everything: the former's a DC,
the latter an openldap server. Moreover they have different BaseDN.
It
looks like freeradius set UserDN for the first ldap and tries to use
the same on the second. I think I need two different values for
LDAP-UserDN, which is not possible, but I read there's some kind of
workaround involving writing on files/authorize but honestly I didn't
understand what I'm supposed to do.
Thanks in advance!
Con OpenStar hai Giga, SMS e i minuti che vuoi da 4,99€ al mese, per
sempre. Cambi gratis quando e come vuoi e in più hai 6 mesi di INFINTY!
http://tisca.li/myopen
------------------------------
Message: 4
Date: Mon, 28 Jan 2019 11:14:50 +0700
From: "Soklang Sum" <soklang.sum@cambotech.com>
To: <freeradius-users@lists.freeradius.org>
Subject: Freeradius-Users Digest, Vol 165, Issue 68
Message-ID: <000201d4b6c0$05465b20$0fd31160$@cambotech.com>
Content-Type: text/plain;       charset="utf-8"
Dear Team Freeradius,
I would like to ask about FreeRADIUS work with google authenticator
(2FA) or not?
I have tried to install freeRADIUS with google authenticator but it
doesn't work, when I try install following the guideline any website
like https://networkjutsu.com/freeradius-google-authenticator/ it
always rejected.
So that why I want to make sure from team expertise freeRADIUS it work
with google authenticator or not?
But I saw in the guideline it works but for me never work.
Please help feedback soon as possible.
Thanks
===================
-----Original Message-----
From: Freeradius-Users <freeradius-users-bounces+soklang.sum=
cambotech.com@lists.freeradius.org> On Behalf Of
freeradius-users-request@lists.freeradius.org
Sent: Sunday, January 27, 2019 6:00 PM
To: freeradius-users@lists.freeradius.org
Subject: Freeradius-Users Digest, Vol 165, Issue 68
Send Freeradius-Users mailing list submissions to
        freeradius-users@lists.freeradius.org
To subscribe or unsubscribe via the World Wide Web, visit
        http://lists.freeradius.org/mailman/listinfo/freeradius-users
or, via email, send a message with subject or body 'help' to
        freeradius-users-request@lists.freeradius.org
You can reach the person managing the list at
        freeradius-users-owner@lists.freeradius.org
When replying, please edit your Subject line so it is more specific
than
"Re: Contents of Freeradius-Users digest..."
Today's Topics:
1. Session start times issues (Philemon Jaomalaza)
   2. Re: Session start times issues (Alan DeKok)
----------------------------------------------------------------------
Message: 1
Date: Sat, 26 Jan 2019 16:43:23 +0300
From: "Philemon Jaomalaza" <philemon.jaomalaza@gmail.com>
To: "'FreeRadius users mailing list'"
        <freeradius-users@lists.freeradius.org>
Subject: Session start times issues
Message-ID: <031301d4b57d$1e29c3a0$5a7d4ae0$@gmail.com>
Content-Type: text/plain;       charset="utf-8"
Hello,
If the nas has a wrong date and time, the sqlcounter does not work
correctly.
The attribute Event-Timestamp got the wrong data and time from nas.
I found this features in preacct substitution:
update request {
                &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
%{%{Acct-Session-Time}:-0} - %{%{Acct-D$
        }
I uncomente it but nothing change.
Where is the best way to have the good local time of radius server on
"acctstarttime" column of "radacct" on sql database ?
JMLZ
---
L'absence de virus dans ce courrier électronique a été vérifiée par le
logiciel antivirus Avast.
https://www.avast.com/antivirus
------------------------------
Message: 2
Date: Sat, 26 Jan 2019 14:35:02 -0500
From: Alan DeKok <aland@deployingradius.com>
To: FreeRadius users mailing list
        <freeradius-users@lists.freeradius.org>
Subject: Re: Session start times issues
Message-ID: <717983BF-2594-4316-807F-0726F706BD53@deployingradius.com>
Content-Type: text/plain;       charset=us-ascii
On Jan 26, 2019, at 8:43 AM, Philemon Jaomalaza <
philemon.jaomalaza@gmail.com> wrote:
...
If the nas has a wrong date and time, the sqlcounter does not work
correctly.
If I take the tires off of my car, it doesn't drive well.
Solution: fix the REAL problem.
...
The attribute Event-Timestamp got the wrong data and time from nas.
Fix the NAS.  Anything else is an ugly hack.
...
I found this features in preacct substitution:
update request {
               &FreeRADIUS-Acct-Session-Start-Time = "%{expr: %l -
%{%{Acct-Session-Time}:-0} - %{%{Acct-D$
       }
I uncomente it but nothing change.
Where is the best way to have the good local time of radius server
on
"acctstarttime" column of "radacct" on sql database ?
Fix the NAS.
Alan DeKok.
------------------------------
Subject: Digest Footer
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
------------------------------
End of Freeradius-Users Digest, Vol 165, Issue 68
*************************************************
------------------------------
Message: 5
Date: Mon, 28 Jan 2019 10:05:15 +0530
From: slnarayanan@nitt.edu
To: FreeRadius users mailing list
        <freeradius-users@lists.freeradius.org>
Subject: radius accounting issue.
Message-ID:
<20190128100515.Horde.b8e9HpA3uLd-EHwBhBcx3A6@webmail.nitt.edu>
Content-Type: text/plain; charset="utf-8"; Format="flowed";
        DelSp="Yes"
Dear All,
I have a problem with accounting .Everything is working fine on
freeradius.Login& authentication sql everything is working fine.But i
have a problem in accounting pocket.We are using sonciwall firwall in
our campus.Those who logged through our radius server the login
information (Radius Accounting) information need to display on
sonicwall user's page.The UDP pocket 1813 not send to our firewall
ip.In the firewall i have enable policy allow to all our local
network.I have attached my radiususd -X log to this mail.Kindly
provide the solution for resolve my issue.The Radius Accounting
information now shows on radacct in the phpmyadmin.
Regards.
S.Lakshmi narayanan
-------------- next part -------------- FreeRADIUS Version 3.0.13
Copyright (C) 1999-2017 The FreeRADIUS server project and contributors
There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A
PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the
terms of the GNU General Public License For more information about
these matters, see the file named COPYRIGHT Starting - reading
configuration files ...
including dictionary file /usr/share/freeradius/dictionary including
dictionary file /usr/share/freeradius/dictionary.dhcp
including dictionary file /usr/share/freeradius/dictionary.vqp
including dictionary file /etc/raddb/dictionary including
configuration file /etc/raddb/radiusd.conf including configuration
file /etc/raddb/proxy.conf including configuration file
/etc/raddb/clients.conf including files in directory
/etc/raddb/mods-enabled/ including configuration file
/etc/raddb/mods-enabled/always including configuration file
/etc/raddb/mods-enabled/attr_filter
including configuration file /etc/raddb/mods-enabled/cache_eap
including configuration file /etc/raddb/mods-enabled/chap including
configuration file /etc/raddb/mods-enabled/date including
configuration file /etc/raddb/mods-enabled/detail including
configuration file /etc/raddb/mods-enabled/detail.log
including configuration file /etc/raddb/mods-enabled/dhcp including
configuration file /etc/raddb/mods-enabled/digest including
configuration file /etc/raddb/mods-enabled/dynamic_clients
including configuration file /etc/raddb/mods-enabled/eap including
configuration file /etc/raddb/mods-enabled/echo including
configuration file /etc/raddb/mods-enabled/exec including
configuration file /etc/raddb/mods-enabled/expiration
including configuration file /etc/raddb/mods-enabled/expr including
configuration file /etc/raddb/mods-enabled/files including
configuration file /etc/raddb/mods-enabled/linelog including
configuration file /etc/raddb/mods-enabled/logintime including
configuration file /etc/raddb/mods-enabled/mschap including
configuration file /etc/raddb/mods-enabled/ntlm_auth including
configuration file /etc/raddb/mods-enabled/pap including configuration
file /etc/raddb/mods-enabled/passwd including configuration file
/etc/raddb/mods-enabled/preprocess
including configuration file /etc/raddb/mods-enabled/radutmp including
configuration file /etc/raddb/mods-enabled/realm including
configuration file /etc/raddb/mods-enabled/replicate including
configuration file /etc/raddb/mods-enabled/soh including configuration
file /etc/raddb/mods-enabled/sradutmp including configuration file
/etc/raddb/mods-enabled/unix including configuration file
/etc/raddb/mods-enabled/unpack including configuration file
/etc/raddb/mods-enabled/utf8 including configuration file
/etc/raddb/mods-enabled/sql including configuration file
/etc/raddb/mods-config/sql/main/mysql/queries.conf
including files in directory /etc/raddb/policy.d/ including
configuration file /etc/raddb/policy.d/accounting including
configuration file /etc/raddb/policy.d/canonicalization
including configuration file /etc/raddb/policy.d/control including
configuration file /etc/raddb/policy.d/cui including configuration
file /etc/raddb/policy.d/debug including configuration file
/etc/raddb/policy.d/dhcp including configuration file
/etc/raddb/policy.d/eap including configuration file
/etc/raddb/policy.d/filter including configuration file
/etc/raddb/policy.d/operator-name including files in directory
/etc/raddb/sites-enabled/ including configuration file
/etc/raddb/sites-enabled/default including configuration file
/etc/raddb/sites-enabled/inner-tunnel
main {
 security {
        user = "radiusd"
        group = "radiusd"
        allow_core_dumps = no
 }
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
}
main {
        name = "radiusd"
        prefix = "/usr"
        localstatedir = "/var"
        sbindir = "/usr/sbin"
        logdir = "/var/log/radius"
        run_dir = "/var/run/radiusd"
        libdir = "/usr/lib64/freeradius"
        radacctdir = "/var/log/radius/radacct"
        hostname_lookups = no
        max_request_time = 30
        cleanup_delay = 5
        max_requests = 16384
        pidfile = "/var/run/radiusd/radiusd.pid"
        checkrad = "/usr/sbin/checkrad"
        debug_level = 0
        proxy_requests = no
 log {
        stripped_names = yes
        auth = yes
        auth_badpass = yes
        auth_goodpass = yes
        colourise = yes
        msg_denied = "You are already logged in - access denied"
 }
 resources {
 }
 security {
        max_attributes = 200
        reject_delay = 1.000000
        status_server = yes
 }
}
radiusd: #### Loading Realms and Home Servers ####  proxy server {
        retry_delay = 5
        retry_count = 3
        default_fallback = no
        dead_time = 120
        wake_all_if_all_dead = no
 }
 home_server localhost {
        ipaddr = 127.0.0.1
        port = 1812
        type = "auth"
        secret = <<< secret >>>
        response_window = 20.000000
        response_timeouts = 1
        max_outstanding = 65536
        zombie_period = 40
        status_check = "status-server"
        ping_interval = 30
        check_interval = 30
        check_timeout = 4
        num_answers_to_alive = 3
        revive_interval = 120
  limit {
        max_connections = 16
        max_requests = 0
        lifetime = 0
        idle_timeout = 0
  }
  coa {
        irt = 2
        mrt = 16
        mrc = 5
        mrd = 30
  }
 }
 home_server_pool my_auth_failover {
        type = fail-over
        home_server = localhost
 }
 realm example.com {
        auth_pool = my_auth_failover
 }
 realm LOCAL {
 }
 realm int {
        virtual_server = inner-tunnel
 }
radiusd: #### Loading Clients ####
 client localhost {
        ipv4addr = *
        require_message_authenticator = no
        secret = <<< secret >>>
        nas_type = "other"
        proto = "udp"
  limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 0
  }
 }
Debugger not attached
 # Creating Auth-Type = mschap
 # Creating Auth-Type = eap
 # Creating Auth-Type = NTLMAuth
 # Creating Auth-Type = MS-CHAP
 # Creating Autz-Type = Status-Server
 # Creating Acct-Type = Status-Server
 # Creating Auth-Type = NTLM_AUTH
radiusd: #### Instantiating modules ####  modules {
  # Loaded module rlm_always
  # Loading module "reject" from file /etc/raddb/mods-enabled/always
  always reject {
        rcode = "reject"
        simulcount = 0
        mpp = no
  }
  # Loading module "fail" from file /etc/raddb/mods-enabled/always
  always fail {
        rcode = "fail"
        simulcount = 0
        mpp = no
  }
  # Loading module "ok" from file /etc/raddb/mods-enabled/always
  always ok {
        rcode = "ok"
        simulcount = 0
        mpp = no
  }
  # Loading module "handled" from file /etc/raddb/mods-enabled/always
  always handled {
        rcode = "handled"
        simulcount = 0
        mpp = no
  }
  # Loading module "invalid" from file /etc/raddb/mods-enabled/always
  always invalid {
        rcode = "invalid"
        simulcount = 0
        mpp = no
  }
  # Loading module "userlock" from file /etc/raddb/mods-enabled/always
  always userlock {
        rcode = "userlock"
        simulcount = 0
        mpp = no
  }
  # Loading module "notfound" from file /etc/raddb/mods-enabled/always
  always notfound {
        rcode = "notfound"
        simulcount = 0
        mpp = no
  }
  # Loading module "noop" from file /etc/raddb/mods-enabled/always
  always noop {
        rcode = "noop"
        simulcount = 0
        mpp = no
  }
  # Loading module "updated" from file /etc/raddb/mods-enabled/always
  always updated {
        rcode = "updated"
        simulcount = 0
        mpp = no
  }
  # Loaded module rlm_attr_filter
  # Loading module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.post-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/post-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.pre-proxy {
        filename = "/etc/raddb/mods-config/attr_filter/pre-proxy"
        key = "%{Realm}"
        relaxed = no
  }
  # Loading module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_reject {
        filename = "/etc/raddb/mods-config/attr_filter/access_reject"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.access_challenge {
        filename = "/etc/raddb/mods-config/attr_filter/access_challenge"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loading module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
  attr_filter attr_filter.accounting_response {
        filename =
"/etc/raddb/mods-config/attr_filter/accounting_response"
        key = "%{User-Name}"
        relaxed = no
  }
  # Loaded module rlm_cache
  # Loading module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap
  cache cache_eap {
        driver = "rlm_cache_rbtree"
        key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}"
        ttl = 15
        max_entries = 0
        epoch = 0
        add_stats = no
  }
  # Loaded module rlm_chap
  # Loading module "chap" from file /etc/raddb/mods-enabled/chap
  # Loaded module rlm_date
  # Loading module "date" from file /etc/raddb/mods-enabled/date
  date {
        format = "%b %e %Y %H:%M:%S %Z"
  }
  # Loaded module rlm_detail
  # Loading module "detail" from file /etc/raddb/mods-enabled/detail
  detail {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/detail-%Y%m%d"
...
header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
...
detail auth_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d"
...
header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
...
detail reply_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d"
...
header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail pre_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d"
...
header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loading module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  detail post_proxy_log {
        filename =
"/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d"
...
header = "%t"
        permissions = 384
        locking = no
        escape_filenames = no
        log_packet_header = no
  }
  # Loaded module rlm_dhcp
  # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp
  # Loaded module rlm_digest
  # Loading module "digest" from file /etc/raddb/mods-enabled/digest
  # Loaded module rlm_dynamic_clients
  # Loading module "dynamic_clients" from file
/etc/raddb/mods-enabled/dynamic_clients
  # Loaded module rlm_eap
  # Loading module "eap" from file /etc/raddb/mods-enabled/eap
  eap {
        default_eap_type = "peap"
        timer_expire = 60
        ignore_unknown_eap_types = no
        cisco_accounting_username_bug = no
        max_sessions = 16384
  }
  # Loaded module rlm_exec
  # Loading module "echo" from file /etc/raddb/mods-enabled/echo
  exec echo {
        wait = yes
        program = "/bin/echo %{User-Name}"
        input_pairs = "request"
        output_pairs = "reply"
        shell_escape = yes
  }
  # Loading module "exec" from file /etc/raddb/mods-enabled/exec
  exec {
        wait = no
        input_pairs = "request"
        shell_escape = yes
        timeout = 10
  }
  # Loaded module rlm_expiration
  # Loading module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Loaded module rlm_expr
  # Loading module "expr" from file /etc/raddb/mods-enabled/expr
  expr {
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_:
/äéöüàâæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎÏÔŒÙÛÜŸ"
  }
  # Loaded module rlm_files
  # Loading module "files" from file /etc/raddb/mods-enabled/files
  files {
        filename = "/etc/raddb/mods-config/files/authorize"
        acctusersfile = "/etc/raddb/mods-config/files/accounting"
        preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy"
  }
  # Loaded module rlm_linelog
  # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog
  linelog {
        filename = "/var/log/radius/linelog"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = "This is a log message for %{User-Name}"
        reference = "messages.%{%{reply:Packet-Type}:-default}"
  }
  # Loading module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  linelog log_accounting {
        filename = "/var/log/radius/linelog-accounting"
        escape_filenames = no
        syslog_severity = "info"
        permissions = 384
        format = ""
        reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}"
  }
  # Loaded module rlm_logintime
  # Loading module "logintime" from file
/etc/raddb/mods-enabled/logintime
...
logintime {
        minimum_timeout = 60
  }
  # Loaded module rlm_mschap
  # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap
  mschap {
        use_mppe = yes
        require_encryption = yes
        require_strong = yes
        with_ntdomain_hack = yes
        ntlm_auth = "/usr/bin/ntlm_auth --request-nt-key
--username=%{mschap:User-Name:-None} --domain=%{%{mschap:NT-Domain}:-
OCTA.EDU} --challenge=%{mschap:Challenge:-00}
--nt-response=%{mschap:NT-Response:-00}"
        ntlm_auth_timeout = 10
   passchange {
        ntlm_auth = "/usr/bin/ntlm_auth
--helper-protocol=ntlm-change-password-1"
        ntlm_auth_username = "username: %{mschap:User-Name}"
        ntlm_auth_domain = "nt-domain: %{mschap:NT-Domain}"
   }
        allow_retry = yes
        winbind_retry_with_normalised_username = no
  }
  # Loading module "ntlm_auth" from file
/etc/raddb/mods-enabled/ntlm_auth
  exec ntlm_auth {
        wait = yes
        program = "/usr/bin/ntlm_auth --request-nt-key
--domain=OCTA.EDU --username=%{mschap:User-Name}
--password=%{User-Password}"
        shell_escape = yes
  }
  # Loaded module rlm_pap
  # Loading module "pap" from file /etc/raddb/mods-enabled/pap
  pap {
        normalise = yes
  }
  # Loaded module rlm_passwd
  # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd
  passwd etc_passwd {
        filename = "/etc/passwd"
        format = "*User-Name:Cleartext-Password:"
        delimiter = ":"
        ignore_nislike = no
        ignore_empty = yes
        allow_multiple_keys = no
        hash_size = 100
  }
  # Loaded module rlm_preprocess
  # Loading module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
  preprocess {
        huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups"
        hints = "/etc/raddb/mods-config/preprocess/hints"
        with_ascend_hack = no
        ascend_channels_per_line = 23
        with_ntdomain_hack = no
        with_specialix_jetstream_hack = no
        with_cisco_vsa_hack = no
        with_alvarion_vsa_hack = no
  }
  # Loaded module rlm_radutmp
  # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp
  radutmp {
        filename = "/var/log/radius/radutmp"
        username = "%{User-Name}"
        case_sensitive = no
        check_with_nas = yes
        permissions = 384
        caller_id = yes
  }
  # Loaded module rlm_realm
  # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm
  realm IPASS {
        format = "prefix"
        delimiter = "/"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "suffix" from file /etc/raddb/mods-enabled/realm
  realm suffix {
        format = "suffix"
        delimiter = "@"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  realm realmpercent {
        format = "suffix"
        delimiter = "%"
        ignore_default = no
        ignore_null = no
  }
  # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm
  realm ntdomain {
        format = "prefix"
        delimiter = "\\"
        ignore_default = no
        ignore_null = no
  }
  # Loaded module rlm_replicate
  # Loading module "replicate" from file
/etc/raddb/mods-enabled/replicate
  # Loaded module rlm_soh
  # Loading module "soh" from file /etc/raddb/mods-enabled/soh
  soh {
        dhcp = yes
  }
  # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp
  radutmp sradutmp {
        filename = "/var/log/radius/sradutmp"
        username = "%{User-Name}"
        case_sensitive = yes
        check_with_nas = yes
        permissions = 420
        caller_id = no
  }
  # Loaded module rlm_unix
  # Loading module "unix" from file /etc/raddb/mods-enabled/unix
  unix {
        radwtmp = "/var/log/radius/radwtmp"
  }
Creating attribute Unix-Group
  # Loaded module rlm_unpack
  # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack
  # Loaded module rlm_utf8
  # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8
  # Loaded module rlm_sql
  # Loading module "sql" from file /etc/raddb/mods-enabled/sql
  sql {
        driver = "rlm_sql_mysql"
        server = "localhost"
        port = 3306
        login = "root"
        password = <<< secret >>>
        radius_db = "radius"
        read_groups = yes
        read_profiles = yes
        read_clients = yes
        delete_stale_sessions = yes
        sql_user_name = "%{User-Name}"
        logfile = "/var/log/radius/sqllog.sql"
        default_user_profile = ""
        client_query = "SELECT id, nasname, shortname, type, secret,
server FROM nas"
        authorize_check_query = "SELECT id, username, attribute,
value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_reply_query = "SELECT id, username, attribute,
value, op FROM radreply WHERE username = '%{SQL-User-Name}' ORDER BY id"
        authorize_group_check_query = "SELECT id, groupname,
attribute, Value, op FROM radgroupcheck WHERE groupname =
'%{SQL-Group}' ORDER BY id"
        authorize_group_reply_query = "SELECT id, groupname,
attribute, value, op FROM radgroupreply WHERE groupname =
'%{SQL-Group}' ORDER BY id"
        group_membership_query = "SELECT groupname FROM radusergroup
WHERE username = '%{SQL-User-Name}' ORDER BY priority"
        simul_count_query = "SELECT COUNT(*) FROM radacct WHERE
username = '%{SQL-User-Name}' AND acctstoptime IS NULL"
        simul_verify_query = "SELECT radacctid, acctsessionid,
username, nasipaddress, nasportid, framedipaddress, callingstationid,
framedprotocol FROM radacct WHERE username = '%{SQL-User-Name}' AND
acctstoptime IS NULL"
        safe_characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
   accounting {
        reference = "%{tolower:type.%{Acct-Status-Type}.query}"
    type {
     accounting-on {
        query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   =
'%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     accounting-off {
        query = "UPDATE radacct SET acctstoptime =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime   =
'%{integer:Event-Timestamp}' - UNIX_TIMESTAMP(acctstarttime),
acctterminatecause = '%{%{Acct-Terminate-Cause}:-NAS-Reboot}' WHERE
acctstoptime IS NULL AND nasipaddress   = '%{NAS-IP-Address}' AND
acctstarttime <= FROM_UNIXTIME(%{integer:Event-Timestamp})"
     }
     start {
        query = "INSERT INTO radacct (acctsessionid,
acctuniqueid,           username, realm,
nasipaddress,           nasportid, nasporttype,         acctstarttime,
    acctupdatetime, acctstoptime,           acctsessiontime,
acctauthentic, connectinfo_start,       connectinfo_stop,
 acctinputoctets, acctoutputoctets,      calledstationid,
callingstationid, acctterminatecause,   servicetype,
framedprotocol, framedipaddress) VALUES ('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{%{NAS-Port-ID}:-%{NAS-Port}}',
'%{NAS-Port-Type}', FROM_UNIXTIME(%{integer:Event-Timestamp}),
FROM_UNIXTIME(%{integer:Event-Timestamp}), NULL, '0',
'%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0',
'%{Called-Station-Id}', '%{Calling-Station-Id}', '',
'%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}')"
     }
     interim-update {
        query = "UPDATE radacct SET acctupdatetime  =
(@acctupdatetime_old:=acctupdatetime), acctupdatetime  =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctinterval    =
%{integer:Event-Timestamp} - UNIX_TIMESTAMP(@acctupdatetime_old),
framedipaddress = '%{Framed-IP-Address}', acctsessiontime =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}' WHERE AcctUniqueId =
'%{Acct-Unique-Session-Id}'"
     }
     stop {
        query = "UPDATE radacct SET acctstoptime        =
FROM_UNIXTIME(%{integer:Event-Timestamp}), acctsessiontime    =
%{%{Acct-Session-Time}:-NULL}, acctinputoctets        =
'%{%{Acct-Input-Gigawords}:-0}' << 32 | '%{%{Acct-Input-Octets}:-0}',
acctoutputoctets = '%{%{Acct-Output-Gigawords}:-0}' << 32 |
'%{%{Acct-Output-Octets}:-0}', acctterminatecause =
'%{Acct-Terminate-Cause}', connectinfo_stop = '%{Connect-Info}' WHERE
AcctUniqueId = '%{Acct-Unique-Session-Id}'"
     }
    }
   }
   post-auth {
        reference = ".query"
        query = "INSERT INTO radpostauth (username, pass, reply,
authdate) VALUES ( '%{SQL-User-Name}',
'%{%{User-Password}:-%{Chap-Password}}',
'%{reply:Packet-Type}', '%S')"
   }
  }
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
linked Creating attribute SQL-Group
  instantiate {
  }
  # Instantiating module "reject" from file
/etc/raddb/mods-enabled/always
  # Instantiating module "fail" from file /etc/raddb/mods-enabled/always
  # Instantiating module "ok" from file /etc/raddb/mods-enabled/always
  # Instantiating module "handled" from file
/etc/raddb/mods-enabled/always
  # Instantiating module "invalid" from file
/etc/raddb/mods-enabled/always
  # Instantiating module "userlock" from file
/etc/raddb/mods-enabled/always
  # Instantiating module "notfound" from file
/etc/raddb/mods-enabled/always
  # Instantiating module "noop" from file /etc/raddb/mods-enabled/always
  # Instantiating module "updated" from file
/etc/raddb/mods-enabled/always
  # Instantiating module "attr_filter.post-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy
  # Instantiating module "attr_filter.pre-proxy" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy
  # Instantiating module "attr_filter.access_reject" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay"    found in filter list for realm "DEFAULT".
[/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item
"FreeRADIUS-Response-Delay-USec"       found in filter list for realm
"DEFAULT".
  # Instantiating module "attr_filter.access_challenge" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/raddb/mods-config/attr_filter/access_challenge
  # Instantiating module "attr_filter.accounting_response" from file
/etc/raddb/mods-enabled/attr_filter
reading pairlist file
/etc/raddb/mods-config/attr_filter/accounting_response
  # Instantiating module "cache_eap" from file
/etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver
rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked
  # Instantiating module "detail" from file
/etc/raddb/mods-enabled/detail
  # Instantiating module "auth_log" from file
/etc/raddb/mods-enabled/detail.log
rlm_detail (auth_log): 'User-Password' suppressed, will not appear in
detail output
  # Instantiating module "reply_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "pre_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "post_proxy_log" from file
/etc/raddb/mods-enabled/detail.log
  # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap
   # Linked to sub-module rlm_eap_tls
   tls {
        tls = "tls-common"
   }
   tls-config tls-common {
        verify_depth = 0
        ca_path = "/etc/raddb/certs"
        pem_file_type = yes
        private_key_file = "/etc/raddb/certs/server.pem"
        certificate_file = "/etc/raddb/certs/server.pem"
        ca_file = "/etc/raddb/certs/ca.pem"
        private_key_password = <<< secret >>>
        fragment_size = 1024
        include_length = yes
        auto_chain = yes
        check_crl = no
        check_all_crl = no
        cipher_list = "DEFAULT"
        cipher_server_preference = no
        ecdh_curve = "prime256v1"
    cache {
        enable = no
        lifetime = 24
        max_entries = 255
    }
    verify {
        skip_if_ocsp_ok = no
    }
    ocsp {
        enable = no
        override_cert_url = yes
        url = "http://127.0.0.1/ocsp/"
        use_nonce = yes
        timeout = 0
        softfail = no
    }
   }
   # Linked to sub-module rlm_eap_ttls
   ttls {
        tls = "tls-common"
        default_eap_type = "md5"
        copy_request_to_tunnel = no
        use_tunneled_reply = no
        virtual_server = "inner-tunnel"
        include_length = yes
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_peap
   peap {
        tls = "tls-common"
        default_eap_type = "mschapv2"
        copy_request_to_tunnel = yes
        use_tunneled_reply = yes
        proxy_tunneled_request_as_eap = no
        virtual_server = "inner-tunnel"
        soh = no
        require_client_cert = no
   }
tls: Using cached TLS configuration from previous invocation
   # Linked to sub-module rlm_eap_mschapv2
   mschapv2 {
        with_ntdomain_hack = no
        send_error = yes
        identity = "FreeRADIUS"
   }
  # Instantiating module "expiration" from file
/etc/raddb/mods-enabled/expiration
  # Instantiating module "files" from file
/etc/raddb/mods-enabled/files reading pairlist file
/etc/raddb/mods-config/files/authorize
reading pairlist file /etc/raddb/mods-config/files/accounting
reading pairlist file /etc/raddb/mods-config/files/pre-proxy
  # Instantiating module "linelog" from file
/etc/raddb/mods-enabled/linelog
  # Instantiating module "log_accounting" from file
/etc/raddb/mods-enabled/linelog
  # Instantiating module "logintime" from file
/etc/raddb/mods-enabled/logintime
  # Instantiating module "mschap" from file
/etc/raddb/mods-enabled/mschap rlm_mschap (mschap): authenticating by
calling 'ntlm_auth'
  # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap
  # Instantiating module "etc_passwd" from file
/etc/raddb/mods-enabled/passwd
rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no
  # Instantiating module "preprocess" from file
/etc/raddb/mods-enabled/preprocess
reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups
reading pairlist file /etc/raddb/mods-config/preprocess/hints
  # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm
  # Instantiating module "suffix" from file
/etc/raddb/mods-enabled/realm
  # Instantiating module "realmpercent" from file
/etc/raddb/mods-enabled/realm
  # Instantiating module "ntdomain" from file
/etc/raddb/mods-enabled/realm
  # Instantiating module "sql" from file /etc/raddb/mods-enabled/sql
rlm_sql_mysql: libmysql version: 10.1.37-MariaDB
   mysql {
    tls {
    }
        warnings = "auto"
   }
rlm_sql (sql): Attempting to connect to database "radius"
rlm_sql (sql): Initialising connection pool
   pool {
        start = 5
        min = 3
        max = 32
        spare = 10
        uses = 0
        lifetime = 0
        cleanup_interval = 30
        idle_timeout = 60
        retry_delay = 30
        spread = no
   }
rlm_sql (sql): Opening additional connection (0), 1 of 32 pending
slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
(sql): Opening additional connection (1), 1 of 31 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
(sql): Opening additional connection (2), 1 of 30 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
(sql): Opening additional connection (3), 1 of 29 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
(sql): Opening additional connection (4), 1 of 28 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
socket, server version 10.1.37-MariaDB, protocol version 10 rlm_sql
(sql): Processing generate_sql_clients rlm_sql (sql) in
generate_sql_clients: query is SELECT id, nasname, shortname, type,
secret, server FROM nas rlm_sql (sql): Reserved connection (0) rlm_sql
(sql): Executing select query: SELECT id, nasname, shortname, type,
secret, server FROM nas rlm_sql (sql): Adding client 10.0.0.38 (domain
controller) to global clients list rlm_sql (10.0.0.38): Client "domain
controller" (sql) added rlm_sql (sql): Adding client 10.0.0.39 (domain
contr-2) to global clients list rlm_sql (10.0.0.39): Client "domain
contr-2" (sql) added rlm_sql (sql): Adding client 10.1.172.16 (team2)
to global clients list rlm_sql (10.1.172.16): Client "team2" (sql)
added rlm_sql (sql): Adding client 10.1.172.18 (team4) to global
clients list rlm_sql (10.1.172.18): Client "team4" (sql) added rlm_sql
(sql): Adding client 10.1.172.19 (team5) to global clients list
rlm_sql (10.1.172.19): Client "team5" (sql) added rlm_sql (sql):
Adding client 10.1.172.20 (team6) to global clients list rlm_sql
(10.1.172.20): Client "team6" (sql) added rlm_sql (sql): Adding client
10.0.0.1 (Local network) to global clients list rlm_sql (10.0.0.1):
Client "Local network" (sql) added rlm_sql (sql): Adding client
192.168.20.1 (ACCT) to global clients list rlm_sql (192.168.20.1):
Client "ACCT" (sql) added rlm_sql (sql): Released connection (0) Need
5 more connections to reach 10 spares rlm_sql (sql): Opening
additional connection (5), 1 of 27 pending slots used
rlm_sql_mysql: Starting connect to MySQL server
rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX
socket, server version 10.1.37-MariaDB, protocol version 10  } #
modules
radiusd: #### Loading Virtual Servers #### server { # from file
/etc/raddb/radiusd.conf } # server server default { # from file
/etc/raddb/sites-enabled/default  # Loading authenticate {...}  #
Loading authorize {...} Ignoring "ldap" (see
raddb/mods-available/README.rst)  # Loading preacct {...}  # Loading
accounting {...} } # server default server inner-tunnel { # from file
/etc/raddb/sites-enabled/inner-tunnel
 # Loading authenticate {...}
 # Loading authorize {...}
 # Loading session {...}
 # Loading post-auth {...}
} # server inner-tunnel
radiusd: #### Opening IP addresses and Ports #### listen {
        type = "auth"
        ipaddr = *
        port = 0
   limit {
        max_connections = 16
        lifetime = 0
        idle_timeout = 0
   }
Failed binding to auth address * port 1812 bound to server default:
Address already in use
/etc/raddb/sites-enabled/default[60]: Error binding to port for
0.0.0.0 port 1812
------------------------------
Subject: Digest Footer
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
------------------------------
End of Freeradius-Users Digest, Vol 165, Issue 69
*************************************************
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
------------------------------
Subject: Digest Footer
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
------------------------------
End of Freeradius-Users Digest, Vol 165, Issue 71
*************************************************
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html