NAS-IP-Address should be different in LAC and LNS requests. And unlang works in version 2.0 not 1.1.x (later post). Ivan Kalik Kalik Informatika ISP Dana 22/2/2008, "Adrian" <adrian@dsl4u.ca> piše:
Hello Ivan,
The Telco wants me to send those parameters to them. I have no choice in that. I'm confused because with every other Telco the setup was straight forward, I setup a tunnel/vpnd-group+virtual template from our LNS to the Telco's LAC and the requests for the user authentication comes from their LAC through my LNS all the time. With this Telco, I see the same request twice. Once from their Radius and then from my LNS. The problem is distinguishing between them and answering differently.
Maybe I don't even have to do that, is just that I'm not sure how to do it otherwise.
For now I'll do some reading on "unlang" as per Alan's request and see how that goes.
Thanks Adrian
-----Original Message----- From: freeradius-users-bounces+adrian=dsl4u.ca@lists.freeradius.org [mailto:freeradius-users-bounces+adrian=dsl4u.ca@lists.freeradius.org] On Behalf Of Ivan Kalik Sent: Friday, February 22, 2008 6:32 AM To: FreeRadius users mailing list Subject: RE: NAS-Group? - different replies to different NASes?
4. Our radius sends the Tunnel information back to Telco Radius
Why? It will be the same every time for every user. Configure tunnel parametars on the (virtual) interface.
Ivan Kalik Kalik Informatika ISP
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html