Hello, First of all, thank you for this post: https://blog.sys4.de/freeradius-clients-netbox-en.html We are in the process of integrating netbox into our infra and this post got me pretty excited. Followed this guide and i was able to see the request as expected https://wiki.freeradius.org/modules/Rlm_python (0) [preprocess] = ok *** authorize *** *** radlog call in authorize *** (('User-Name', 'myusername'), ('User-Password', 'mysecretpassword'), ('NAS-IPv6-Address', 'xxx:xxx:xx:xxx:21c:2eff:fe57:cd00'), ('NAS-Identifier', 'myswitchname'), ('NAS-Port-Type', 'Virtual'), ('Service-Type', 'NAS-Prompt-User'), ('Message-Authenticator', '0xasdfasdfasdf231234512asdfasd'), ('MS-RAS-Vendor', '11'), ('Calling-Station-Id', 'xx:xxx:xxx:12'), ('Event-Timestamp', 'Jan 26 2022 13:34:21 EST'), ('Huntgroup-Name', 'switch')) {} (0) [python3] = ok According to the python code on the netbox post, i should be able to store the secret into netbox. Since im still in my testing phase, I wanted to see the secret. I thought it would show by print(p) but it does not. So my question, where is the secret ? How can i see it if possible? Thank you again for the very interesting posts! Best, Dave