As per the dictionary file in your raddb directory: # As of version 3.0.2, FreeRADIUS will automatically # load the main dictionary files from # # ${prefix}/share/freeradius/dictionary # # It is no longer necessary for this file to $INCLUDE # the main dictionaries. However, if the $INCLUDE # line is here, nothing bad will happen. So whatever is in your radiusd.conf pointing to ${prefix} typically: radiusd.conf: prefix = /usr Then in the /usr/share/freeradius/dictionary will have a lot of $INCLUDE statements for every dictionary. But just because when starting radiusd -X doesn't show all dictionaries, doesn't mean they aren't being loaded. ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp ... So unless you have commented out the $INCLUDE statement in the /usr/share/freeradius/dictionary file it will load all the dictionaries in that directory specified by the $INCLUDE statement. On Wed, Sep 20, 2017 at 9:14 AM, Chris Kukkonen <chris@mindworkssec.com> wrote:
I am attempting to use a vendors dictionary: /usr/share/freeradius/dictionary/dictionary.brocade and I believe it is not being read. I have removed commented lines from dictionary.
[root@vader raddb]# pwd /etc/raddb [root@vader raddb]# ls -al dic* -rw-r--r--. 1 root radiusd 1667 Sep 19 14:44 dictionary -rw-r--r--. 1 root radiusd 688 Sep 18 15:35 dictionary.brocade [root@vader raddb]# more dictionary # # $Id: eed5d70f41b314f9ed3f006a22d9f9a2be2c9516 $ # $INCLUDE /usr/share/freeradius/dictionary $INCLUDE dictionary.brocade
[root@vader raddb]# more dictionary.brocade # -*- text -*- # Copyright (C) 2015 The FreeRADIUS Server project and contributors # VENDOR Brocade 1588 BEGIN-VENDOR Brocade
ATTRIBUTE Brocade-Auth-Role 1 string # Valid attribute values: # Admin BasicSwitchAdmin FabricAdmin Operator # SecurityAdmin SwitchAdmin User ZoneAdmin
ATTRIBUTE Brocade-AVPairs1 2 string ATTRIBUTE Brocade-AVPairs2 3 string ATTRIBUTE Brocade-AVPairs3 4 string ATTRIBUTE Brocade-AVPairs4 5 string # Brocade-AVPairs1/2/3/4: # Optional, specifies Admin Domain or Virtual Fabric List
ATTRIBUTE Brocade-Passwd-ExpiryDate 6 string # Format: MM/DD/YYYY ATTRIBUTE Brocade-Passwd-WarnPeriod 7 string # Format: integer in days
END-VENDOR Brocade
Dictionaries in /usr/share/freeradius are root/root but I am not sure if these are actually used.
When starting radiusd, I am not able to confirm dictionary.brocade is loaded, and my clients are not receiving their attributes.
[root@vader ~]# /usr/sbin/radiusd -X Copyright (C) 1999-2015 The FreeRADIUS server project and contributors There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE You may redistribute copies of FreeRADIUS under the terms of the GNU General Public License For more information about these matters, see the file named COPYRIGHT Starting - reading configuration files ... including dictionary file /usr/share/freeradius/dictionary including dictionary file /usr/share/freeradius/dictionary.dhcp including dictionary file /usr/share/freeradius/dictionary.vqp including dictionary file /etc/raddb/dictionary <------ This is where I would expect to see the dictionary.brocade called out including configuration file /etc/raddb/radiusd.conf including configuration file /etc/raddb/proxy.conf including configuration file /etc/raddb/clients.conf including files in directory /etc/raddb/mods-enabled/ including configuration file /etc/raddb/mods-enabled/eap including configuration file /etc/raddb/mods-enabled/expiration including configuration file /etc/raddb/mods-enabled/files including configuration file /etc/raddb/mods-enabled/digest including configuration file /etc/raddb/mods-enabled/preprocess including configuration file /etc/raddb/mods-enabled/dynamic_clients including configuration file /etc/raddb/mods-enabled/detail including configuration file /etc/raddb/mods-enabled/echo including configuration file /etc/raddb/mods-enabled/replicate including configuration file /etc/raddb/mods-enabled/unix including configuration file /etc/raddb/mods-enabled/linelog including configuration file /etc/raddb/mods-enabled/chap including configuration file /etc/raddb/mods-enabled/detail.log including configuration file /etc/raddb/mods-enabled/logintime including configuration file /etc/raddb/mods-enabled/expr including configuration file /etc/raddb/mods-enabled/sradutmp including configuration file /etc/raddb/mods-enabled/utf8 including configuration file /etc/raddb/mods-enabled/cache_eap including configuration file /etc/raddb/mods-enabled/pap including configuration file /etc/raddb/mods-enabled/ntlm_auth including configuration file /etc/raddb/mods-enabled/exec including configuration file /etc/raddb/mods-enabled/attr_filter including configuration file /etc/raddb/mods-enabled/realm including configuration file /etc/raddb/mods-enabled/dhcp including configuration file /etc/raddb/mods-enabled/always including configuration file /etc/raddb/mods-enabled/soh including configuration file /etc/raddb/mods-enabled/passwd including configuration file /etc/raddb/mods-enabled/mschap including configuration file /etc/raddb/mods-enabled/radutmp including configuration file /etc/raddb/mods-enabled/unpack including files in directory /etc/raddb/policy.d/ including configuration file /etc/raddb/policy.d/eap including configuration file /etc/raddb/policy.d/debug including configuration file /etc/raddb/policy.d/cui including configuration file /etc/raddb/policy.d/filter including configuration file /etc/raddb/policy.d/operator-name including configuration file /etc/raddb/policy.d/dhcp including configuration file /etc/raddb/policy.d/accounting including configuration file /etc/raddb/policy.d/control including configuration file /etc/raddb/policy.d/canonicalization including files in directory /etc/raddb/sites-enabled/ including configuration file /etc/raddb/sites-enabled/default including configuration file /etc/raddb/sites-enabled/inner-tunnel main { security { user = "radiusd" group = "radiusd" allow_core_dumps = no } name = "radiusd" prefix = "/usr" localstatedir = "/var" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" } main { name = "radiusd" prefix = "/usr" localstatedir = "/var" sbindir = "/usr/sbin" logdir = "/var/log/radius" run_dir = "/var/run/radiusd" libdir = "/usr/lib64/freeradius" radacctdir = "/var/log/radius/radacct" hostname_lookups = no max_request_time = 30 cleanup_delay = 5 max_requests = 16384 pidfile = "/var/run/radiusd/radiusd.pid" checkrad = "/usr/sbin/checkrad" debug_level = 0 proxy_requests = yes log { stripped_names = no auth = no auth_badpass = no auth_goodpass = no colourise = yes msg_denied = "You are already logged in - access denied" } resources { } security { max_attributes = 200 reject_delay = 1.000000 status_server = yes } } radiusd: #### Loading Realms and Home Servers #### proxy server { retry_delay = 5 retry_count = 3 default_fallback = no dead_time = 120 wake_all_if_all_dead = no } home_server localhost { ipaddr = 127.0.0.1 port = 1812 type = "auth" secret = <<< secret >>> response_window = 20.000000 response_timeouts = 1 max_outstanding = 65536 zombie_period = 40 status_check = "status-server" ping_interval = 30 check_interval = 30 check_timeout = 4 num_answers_to_alive = 3 revive_interval = 120 limit { max_connections = 16 max_requests = 0 lifetime = 0 idle_timeout = 0 } coa { irt = 2 mrt = 16 mrc = 5 mrd = 30 } } home_server_pool my_auth_failover { type = fail-over home_server = localhost } realm example.com { auth_pool = my_auth_failover } realm LOCAL { } radiusd: #### Loading Clients #### client localhost { ipaddr = 127.0.0.1 require_message_authenticator = no secret = <<< secret >>> nas_type = "other" proto = "*" limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client localhost_ipv6 { ipv6addr = ::1 require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } client 10.10.10.0/24 { require_message_authenticator = no secret = <<< secret >>> limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } No 'ipaddr' or 'ipv4addr' or 'ipv6addr' field found in client 10.10.10.0/24. Please fix your configuration Support for old-style clients will be removed in a future release Debugger not attached # Creating Auth-Type = digest radiusd: #### Instantiating modules #### # Loaded module rlm_eap # Loading module "eap" from file /etc/raddb/mods-enabled/eap eap { default_eap_type = "peap" timer_expire = 60 ignore_unknown_eap_types = no cisco_accounting_username_bug = no max_sessions = 16384 } # Loaded module rlm_expiration # Loading module "expiration" from file /etc/raddb/mods-enabled/ expiration # Loaded module rlm_files # Loading module "files" from file /etc/raddb/mods-enabled/files files { filename = "/etc/raddb/mods-config/files/authorize" acctusersfile = "/etc/raddb/mods-config/files/accounting" preproxy_usersfile = "/etc/raddb/mods-config/files/pre-proxy" } # Loaded module rlm_digest # Loading module "digest" from file /etc/raddb/mods-enabled/digest # Loaded module rlm_preprocess # Loading module "preprocess" from file /etc/raddb/mods-enabled/ preprocess preprocess { huntgroups = "/etc/raddb/mods-config/preprocess/huntgroups" hints = "/etc/raddb/mods-config/preprocess/hints" with_ascend_hack = no ascend_channels_per_line = 23 with_ntdomain_hack = no with_specialix_jetstream_hack = no with_cisco_vsa_hack = no with_alvarion_vsa_hack = no } # Loaded module rlm_dynamic_clients # Loading module "dynamic_clients" from file /etc/raddb/mods-enabled/dynamic_clients # Loaded module rlm_detail # Loading module "detail" from file /etc/raddb/mods-enabled/detail detail { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_exec # Loading module "echo" from file /etc/raddb/mods-enabled/echo exec echo { wait = yes program = "/bin/echo %{User-Name}" input_pairs = "request" output_pairs = "reply" shell_escape = yes } # Loaded module rlm_replicate # Loading module "replicate" from file /etc/raddb/mods-enabled/replicate # Loaded module rlm_unix # Loading module "unix" from file /etc/raddb/mods-enabled/unix unix { radwtmp = "/var/log/radius/radwtmp" } Creating attribute Unix-Group # Loaded module rlm_linelog # Loading module "linelog" from file /etc/raddb/mods-enabled/linelog linelog { filename = "/var/log/radius/linelog" escape_filenames = no syslog_severity = "info" permissions = 384 format = "This is a log message for %{User-Name}" reference = "messages.%{%{reply:Packet-Type}:-default}" } # Loading module "log_accounting" from file /etc/raddb/mods-enabled/linelog linelog log_accounting { filename = "/var/log/radius/linelog-accounting" escape_filenames = no syslog_severity = "info" permissions = 384 format = "" reference = "Accounting-Request.%{%{Acct-Status-Type}:-unknown}" } # Loaded module rlm_chap # Loading module "chap" from file /etc/raddb/mods-enabled/chap # Loading module "auth_log" from file /etc/raddb/mods-enabled/detail.log detail auth_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/auth-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "reply_log" from file /etc/raddb/mods-enabled/ detail.log detail reply_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/reply-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail pre_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/pre-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loading module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log detail post_proxy_log { filename = "/var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/post-proxy-detail-%Y%m%d" header = "%t" permissions = 384 locking = no escape_filenames = no log_packet_header = no } # Loaded module rlm_logintime # Loading module "logintime" from file /etc/raddb/mods-enabled/logintime logintime { minimum_timeout = 60 } # Loaded module rlm_expr # Loading module "expr" from file /etc/raddb/mods-enabled/expr expr { safe_characters = "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /äéöüà âæçèéêëîïôœùûüaÿÄÉÖÜßÀÂÆÇÈÉÊËÎà ÔŒÙÛÜŸ" } # Loaded module rlm_radutmp # Loading module "sradutmp" from file /etc/raddb/mods-enabled/sradutmp radutmp sradutmp { filename = "/var/log/radius/sradutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 420 caller_id = no } # Loaded module rlm_utf8 # Loading module "utf8" from file /etc/raddb/mods-enabled/utf8 # Loaded module rlm_cache # Loading module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap cache cache_eap { driver = "rlm_cache_rbtree" key = "%{%{control:State}:-%{%{reply:State}:-%{State}}}" ttl = 15 max_entries = 0 epoch = 0 add_stats = no } # Loaded module rlm_pap # Loading module "pap" from file /etc/raddb/mods-enabled/pap pap { normalise = yes } # Loading module "ntlm_auth" from file /etc/raddb/mods-enabled/ntlm_auth exec ntlm_auth { wait = yes program = "/path/to/ntlm_auth --request-nt-key --domain=MYDOMAIN --username=%{mschap:User-Name} --password=%{User-Password}" shell_escape = yes } # Loading module "exec" from file /etc/raddb/mods-enabled/exec exec { wait = no input_pairs = "request" shell_escape = yes timeout = 10 } # Loaded module rlm_attr_filter # Loading module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.post-proxy { filename = "/etc/raddb/mods-config/attr_filter/post-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.pre-proxy { filename = "/etc/raddb/mods-config/attr_filter/pre-proxy" key = "%{Realm}" relaxed = no } # Loading module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_reject { filename = "/etc/raddb/mods-config/attr_filter/access_reject" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.access_challenge { filename = "/etc/raddb/mods-config/attr_filter/access_challenge" key = "%{User-Name}" relaxed = no } # Loading module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter attr_filter attr_filter.accounting_response { filename = "/etc/raddb/mods-config/attr_ filter/accounting_response" key = "%{User-Name}" relaxed = no } # Loaded module rlm_realm # Loading module "IPASS" from file /etc/raddb/mods-enabled/realm realm IPASS { format = "prefix" delimiter = "/" ignore_default = no ignore_null = no } # Loading module "suffix" from file /etc/raddb/mods-enabled/realm realm suffix { format = "suffix" delimiter = "@" ignore_default = no ignore_null = no } # Loading module "realmpercent" from file /etc/raddb/mods-enabled/realm realm realmpercent { format = "suffix" delimiter = "%" ignore_default = no ignore_null = no } # Loading module "ntdomain" from file /etc/raddb/mods-enabled/realm realm ntdomain { format = "prefix" delimiter = "\\" ignore_default = no ignore_null = no } # Loaded module rlm_dhcp # Loading module "dhcp" from file /etc/raddb/mods-enabled/dhcp # Loaded module rlm_always # Loading module "reject" from file /etc/raddb/mods-enabled/always always reject { rcode = "reject" simulcount = 0 mpp = no } # Loading module "fail" from file /etc/raddb/mods-enabled/always always fail { rcode = "fail" simulcount = 0 mpp = no } # Loading module "ok" from file /etc/raddb/mods-enabled/always always ok { rcode = "ok" simulcount = 0 mpp = no } # Loading module "handled" from file /etc/raddb/mods-enabled/always always handled { rcode = "handled" simulcount = 0 mpp = no } # Loading module "invalid" from file /etc/raddb/mods-enabled/always always invalid { rcode = "invalid" simulcount = 0 mpp = no } # Loading module "userlock" from file /etc/raddb/mods-enabled/always always userlock { rcode = "userlock" simulcount = 0 mpp = no } # Loading module "notfound" from file /etc/raddb/mods-enabled/always always notfound { rcode = "notfound" simulcount = 0 mpp = no } # Loading module "noop" from file /etc/raddb/mods-enabled/always always noop { rcode = "noop" simulcount = 0 mpp = no } # Loading module "updated" from file /etc/raddb/mods-enabled/always always updated { rcode = "updated" simulcount = 0 mpp = no } # Loaded module rlm_soh # Loading module "soh" from file /etc/raddb/mods-enabled/soh soh { dhcp = yes } # Loaded module rlm_passwd # Loading module "etc_passwd" from file /etc/raddb/mods-enabled/passwd passwd etc_passwd { filename = "/etc/passwd" format = "*User-Name:Crypt-Password:" delimiter = ":" ignore_nislike = no ignore_empty = yes allow_multiple_keys = no hash_size = 100 } # Loaded module rlm_mschap # Loading module "mschap" from file /etc/raddb/mods-enabled/mschap mschap { use_mppe = yes require_encryption = no require_strong = no with_ntdomain_hack = yes passchange { } allow_retry = yes } # Loading module "radutmp" from file /etc/raddb/mods-enabled/radutmp radutmp { filename = "/var/log/radius/radutmp" username = "%{User-Name}" case_sensitive = yes check_with_nas = yes permissions = 384 caller_id = yes } # Loaded module rlm_unpack # Loading module "unpack" from file /etc/raddb/mods-enabled/unpack instantiate { } modules { # Instantiating module "eap" from file /etc/raddb/mods-enabled/eap # Linked to sub-module rlm_eap_md5 # Linked to sub-module rlm_eap_leap # Linked to sub-module rlm_eap_gtc gtc { challenge = "Password: " auth_type = "PAP" } # Linked to sub-module rlm_eap_tls tls { tls = "tls-common" } tls-config tls-common { rsa_key_exchange = no dh_key_exchange = yes rsa_key_length = 512 dh_key_length = 512 verify_depth = 0 ca_path = "/etc/raddb/certs" pem_file_type = yes private_key_file = "/etc/raddb/certs/ca.key" certificate_file = "/etc/raddb/certs/ca.pem" ca_file = "/etc/raddb/certs/ca.pem" private_key_password = <<< secret >>> dh_file = "/etc/raddb/certs/dh" random_file = "/dev/urandom" fragment_size = 1024 include_length = yes check_crl = no check_all_crl = no cipher_list = "DEFAULT" ecdh_curve = "prime256v1" cache { enable = yes lifetime = 24 max_entries = 255 } verify { } ocsp { enable = no override_cert_url = yes url = "http://127.0.0.1/ocsp/" use_nonce = yes timeout = 0 softfail = no } } # Linked to sub-module rlm_eap_ttls ttls { tls = "tls-common" default_eap_type = "peap" copy_request_to_tunnel = no use_tunneled_reply = no virtual_server = "inner-tunnel" include_length = yes require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_peap peap { tls = "tls-common" default_eap_type = "mschapv2" copy_request_to_tunnel = no use_tunneled_reply = no proxy_tunneled_request_as_eap = yes virtual_server = "inner-tunnel" soh = no require_client_cert = no } tls: Using cached TLS configuration from previous invocation # Linked to sub-module rlm_eap_mschapv2 mschapv2 { with_ntdomain_hack = no send_error = no } # Instantiating module "expiration" from file /etc/raddb/mods-enabled/expiration # Instantiating module "files" from file /etc/raddb/mods-enabled/files reading pairlist file /etc/raddb/mods-config/files/authorize reading pairlist file /etc/raddb/mods-config/files/accounting reading pairlist file /etc/raddb/mods-config/files/pre-proxy # Instantiating module "preprocess" from file /etc/raddb/mods-enabled/preprocess reading pairlist file /etc/raddb/mods-config/preprocess/huntgroups reading pairlist file /etc/raddb/mods-config/preprocess/hints # Instantiating module "detail" from file /etc/raddb/mods-enabled/detail # Instantiating module "linelog" from file /etc/raddb/mods-enabled/ linelog # Instantiating module "log_accounting" from file /etc/raddb/mods-enabled/linelog # Instantiating module "auth_log" from file /etc/raddb/mods-enabled/detail.log rlm_detail (auth_log): 'User-Password' suppressed, will not appear in detail output # Instantiating module "reply_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "pre_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "post_proxy_log" from file /etc/raddb/mods-enabled/detail.log # Instantiating module "logintime" from file /etc/raddb/mods-enabled/logintime # Instantiating module "cache_eap" from file /etc/raddb/mods-enabled/cache_eap rlm_cache (cache_eap): Driver rlm_cache_rbtree (module rlm_cache_rbtree) loaded and linked # Instantiating module "pap" from file /etc/raddb/mods-enabled/pap # Instantiating module "attr_filter.post-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/post-proxy # Instantiating module "attr_filter.pre-proxy" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/pre-proxy # Instantiating module "attr_filter.access_reject" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_reject [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay" found in filter list for realm "DEFAULT". [/etc/raddb/mods-config/attr_filter/access_reject]:11 Check item "FreeRADIUS-Response-Delay-USec" found in filter list for realm "DEFAULT". # Instantiating module "attr_filter.access_challenge" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_filter/access_challenge # Instantiating module "attr_filter.accounting_response" from file /etc/raddb/mods-enabled/attr_filter reading pairlist file /etc/raddb/mods-config/attr_ filter/accounting_response # Instantiating module "IPASS" from file /etc/raddb/mods-enabled/realm # Instantiating module "suffix" from file /etc/raddb/mods-enabled/realm # Instantiating module "realmpercent" from file /etc/raddb/mods-enabled/realm # Instantiating module "ntdomain" from file /etc/raddb/mods-enabled/realm # Instantiating module "reject" from file /etc/raddb/mods-enabled/always # Instantiating module "fail" from file /etc/raddb/mods-enabled/always # Instantiating module "ok" from file /etc/raddb/mods-enabled/always # Instantiating module "handled" from file /etc/raddb/mods-enabled/always # Instantiating module "invalid" from file /etc/raddb/mods-enabled/always # Instantiating module "userlock" from file /etc/raddb/mods-enabled/always # Instantiating module "notfound" from file /etc/raddb/mods-enabled/always # Instantiating module "noop" from file /etc/raddb/mods-enabled/always # Instantiating module "updated" from file /etc/raddb/mods-enabled/always # Instantiating module "etc_passwd" from file /etc/raddb/mods-enabled/passwd rlm_passwd: nfields: 3 keyfield 0(User-Name) listable: no # Instantiating module "mschap" from file /etc/raddb/mods-enabled/mschap rlm_mschap (mschap): using internal authentication } # modules radiusd: #### Loading Virtual Servers #### server { # from file /etc/raddb/radiusd.conf } # server server default { # from file /etc/raddb/sites-enabled/default # Loading authenticate {...} # Loading authorize {...} Ignoring "sql" (see raddb/mods-available/README.rst) Ignoring "ldap" (see raddb/mods-available/README.rst) # Loading preacct {...} # Loading accounting {...} # Loading post-proxy {...} # Loading post-auth {...} } # server default server inner-tunnel { # from file /etc/raddb/sites-enabled/inner-tunnel # Loading authenticate {...} # Loading authorize {...} # Loading session {...} # Loading post-proxy {...} # Loading post-auth {...} } # server inner-tunnel radiusd: #### Opening IP addresses and Ports #### listen { type = "auth" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipaddr = * port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "acct" ipv6addr = :: port = 0 limit { max_connections = 16 lifetime = 0 idle_timeout = 30 } } listen { type = "auth" ipaddr = 127.0.0.1 port = 18120 } Listening on auth address * port 1812 bound to server default Listening on acct address * port 1813 bound to server default Listening on auth address :: port 1812 bound to server default Listening on acct address :: port 1813 bound to server default Listening on auth address 127.0.0.1 port 18120 bound to server inner-tunnel Listening on proxy address * port 58585 Listening on proxy address :: port 32864 Ready to process requests
Authentication attempt, in case this is of use:
(0) Received Access-Request Id 144 from 10.10.10.169:43523 to 10.10.10.41:1812 length 73 (0) User-Name = "swadmin" (0) NAS-IP-Address = 10.10.10.41 (0) NAS-Port = 0 (0) EAP-Message = 0x02d2000c01737761646d696e (0) Message-Authenticator = 0xab640beb2a355cf5c760d46ab6c93ba5 (0) # Executing section authorize from file /etc/raddb/sites-enabled/ default (0) authorize { (0) policy filter_username { (0) if (!&User-Name) { (0) if (!&User-Name) -> FALSE (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@.*@/ ) { (0) if (&User-Name =~ /@.*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: Peer sent EAP Response (code 2) ID 210 length 12 (0) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (0) [eap] = ok (0) } # authorize = ok (0) Found Auth-Type = EAP (0) # Executing group from file /etc/raddb/sites-enabled/default (0) authenticate { (0) eap: Peer sent packet with method EAP Identity (1) (0) eap: Calling submodule eap_peap to process data (0) eap_peap: Initiating new EAP-TLS session (0) eap_peap: Flushing SSL sessions (of #0) (0) eap_peap: [eaptls start] = request (0) eap: Sending EAP Request (code 1) ID 211 length 6 (0) eap: EAP session adding &reply:State = 0x2ea7ef802e74f6df (0) [eap] = handled (0) } # authenticate = handled (0) Using Post-Auth-Type Challenge (0) Post-Auth-Type sub-section not found. Ignoring. (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Sent Access-Challenge Id 144 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (0) EAP-Message = 0x01d300061920 (0) Message-Authenticator = 0x00000000000000000000000000000000 (0) State = 0x2ea7ef802e74f6df3693c3c995d521f2 (0) Finished request Waking up in 4.9 seconds. (1) Received Access-Request Id 145 from 10.10.10.169:43523 to 10.10.10.41:1812 length 191 (1) User-Name = "swadmin" (1) NAS-IP-Address = 10.10.10.41 (1) NAS-Port = 0 (1) State = 0x2ea7ef802e74f6df3693c3c995d521f2 (1) EAP-Message = 0x02d3007019800000006616030100610100005d0303dc50089cf14f604c e75b86aeddb03c4436e730a450cafdd173ffbbff0f494cec00000c003d00 35003c002f000a00ff0100002800230000000d0020001e06010602060305 0105020503040104020403030103020303020102020203 (1) Message-Authenticator = 0xac1fe33d0504aa48024829daaa56797c (1) session-state: No cached attributes (1) # Executing section authorize from file /etc/raddb/sites-enabled/ default (1) authorize { (1) policy filter_username { (1) if (!&User-Name) { (1) if (!&User-Name) -> FALSE (1) if (&User-Name =~ / /) { (1) if (&User-Name =~ / /) -> FALSE (1) if (&User-Name =~ /@.*@/ ) { (1) if (&User-Name =~ /@.*@/ ) -> FALSE (1) if (&User-Name =~ /\.\./ ) { (1) if (&User-Name =~ /\.\./ ) -> FALSE (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (1) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (1) if (&User-Name =~ /\.$/) { (1) if (&User-Name =~ /\.$/) -> FALSE (1) if (&User-Name =~ /@\./) { (1) if (&User-Name =~ /@\./) -> FALSE (1) } # policy filter_username = notfound (1) [preprocess] = ok (1) [chap] = noop (1) [mschap] = noop (1) [digest] = noop (1) suffix: Checking for suffix after "@" (1) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (1) suffix: No such realm "NULL" (1) [suffix] = noop (1) eap: Peer sent EAP Response (code 2) ID 211 length 112 (1) eap: Continuing tunnel setup (1) [eap] = ok (1) } # authorize = ok (1) Found Auth-Type = EAP (1) # Executing group from file /etc/raddb/sites-enabled/default (1) authenticate { (1) eap: Expiring EAP session with state 0x2ea7ef802e74f6df (1) eap: Finished EAP session with state 0x2ea7ef802e74f6df (1) eap: Previous EAP request found for state 0x2ea7ef802e74f6df, released from the list (1) eap: Peer sent packet with method EAP PEAP (25) (1) eap: Calling submodule eap_peap to process data (1) eap_peap: Continuing EAP-TLS (1) eap_peap: Peer indicated complete TLS record size will be 102 bytes (1) eap_peap: Got complete TLS record (102 bytes) (1) eap_peap: [eaptls verify] = length included (1) eap_peap: (other): before/accept initialization (1) eap_peap: TLS_accept: before/accept initialization (1) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (1) eap_peap: <<< TLS 1.2 [length 0061] (1) eap_peap: TLS_accept: SSLv3 read client hello A (1) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (1) eap_peap: >>> TLS 1.2 [length 0051] (1) eap_peap: TLS_accept: SSLv3 write server hello A (1) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (1) eap_peap: >>> TLS 1.2 [length 0625] (1) eap_peap: TLS_accept: SSLv3 write certificate A (1) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (1) eap_peap: >>> TLS 1.2 [length 0004] (1) eap_peap: TLS_accept: SSLv3 write server done A (1) eap_peap: TLS_accept: SSLv3 flush data (1) eap_peap: TLS_accept: SSLv3 read client certificate A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_peap: TLS_accept: Need to read more data: SSLv3 read client key exchange A (1) eap_peap: In SSL Handshake Phase (1) eap_peap: In SSL Accept mode (1) eap_peap: [eaptls process] = handled (1) eap: Sending EAP Request (code 1) ID 212 length 1004 (1) eap: EAP session adding &reply:State = 0x2ea7ef802f73f6df (1) [eap] = handled (1) } # authenticate = handled (1) Using Post-Auth-Type Challenge (1) Post-Auth-Type sub-section not found. Ignoring. (1) # Executing group from file /etc/raddb/sites-enabled/default (1) Sent Access-Challenge Id 145 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (1) EAP-Message = 0x01d403ec19c00000068916030300510200004d0303c1eb884d2b3536af 449cf4a93561b305e3195256922b69dcf3ef67329bc6be2320c929510df2 44ed060c53cd90e9b2940df2add6e931aeaca3a7602f0ec476608b003d00 0005ff0100010016030306250b00062100061e00061b30820617308203ff (1) Message-Authenticator = 0x00000000000000000000000000000000 (1) State = 0x2ea7ef802f73f6df3693c3c995d521f2 (1) Finished request Waking up in 4.8 seconds. (2) Received Access-Request Id 146 from 10.10.10.169:43523 to 10.10.10.41:1812 length 64 (2) EAP-Message = 0x02d400061908 (2) State = 0x2ea7ef802f73f6df3693c3c995d521f2 (2) Message-Authenticator = 0xf9e31e911cf62e72c012f342e6166bc5 (2) session-state: No cached attributes (2) # Executing section authorize from file /etc/raddb/sites-enabled/ default (2) authorize { (2) policy filter_username { (2) if (!&User-Name) { (2) if (!&User-Name) -> TRUE (2) if (!&User-Name) { (2) [noop] = noop (2) } # if (!&User-Name) = noop (2) if (&User-Name =~ / /) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if (&User-Name =~ /@.*@/ ) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if (&User-Name =~ /\.\./ ) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if (&User-Name =~ /\.$/) { (2) ERROR: Failed retrieving values required to evaluate condition (2) if (&User-Name =~ /@\./) { (2) ERROR: Failed retrieving values required to evaluate condition (2) } # policy filter_username = noop (2) [preprocess] = ok (2) [chap] = noop (2) [mschap] = noop (2) [digest] = noop (2) suffix: Proxy reply, or no User-Name. Ignoring (2) [suffix] = noop (2) eap: Peer sent EAP Response (code 2) ID 212 length 6 (2) eap: Continuing tunnel setup (2) [eap] = ok (2) } # authorize = ok (2) Found Auth-Type = EAP (2) # Executing group from file /etc/raddb/sites-enabled/default (2) authenticate { (2) eap: Expiring EAP session with state 0x2ea7ef802f73f6df (2) eap: Finished EAP session with state 0x2ea7ef802f73f6df (2) eap: Previous EAP request found for state 0x2ea7ef802f73f6df, released from the list (2) eap: Broken NAS did not set User-Name, setting from EAP Identity (2) eap: Peer sent packet with method EAP PEAP (25) (2) eap: Calling submodule eap_peap to process data (2) eap_peap: Continuing EAP-TLS (2) eap_peap: Peer ACKed our handshake fragment (2) eap_peap: [eaptls verify] = request (2) eap_peap: [eaptls process] = handled (2) eap: Sending EAP Request (code 1) ID 213 length 685 (2) eap: EAP session adding &reply:State = 0x2ea7ef802c72f6df (2) [eap] = handled (2) } # authenticate = handled (2) Using Post-Auth-Type Challenge (2) Post-Auth-Type sub-section not found. Ignoring. (2) # Executing group from file /etc/raddb/sites-enabled/default (2) Sent Access-Challenge Id 146 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (2) EAP-Message = 0x01d502ad1900cfea35d39782f46061d022042bb4194ed0a223fa5762d7 c7e24a5e998e6e2c9f6371e35a051824cf7218e3a44842b28cdfbdaf0203 010001a350304e301d0603551d0e04160414ad524818982efdf05efcf0c1 bb04aefbc27999a6301f0603551d23041830168014ad524818982efdf05e (2) Message-Authenticator = 0x00000000000000000000000000000000 (2) State = 0x2ea7ef802c72f6df3693c3c995d521f2 (2) Finished request Waking up in 4.8 seconds. (3) Received Access-Request Id 147 from 10.10.10.169:43523 to 10.10.10.41:1812 length 707 (3) User-Name = "swadmin" (3) NAS-IP-Address = 10.10.10.41 (3) NAS-Port = 0 (3) State = 0x2ea7ef802c72f6df3693c3c995d521f2 (3) EAP-Message = 0x02d5027019800000026616030302061000020202008fca9cfef4ddbdd0 e3baf0650fb8345df69c663ac80402206eb34b2ff3215c37dde7b9168709 7abb7b4678af40b578afa06a813b2ca77de4f3ef36ce30f448c66527d3a3 0ef62683bd4e80a84d6692abf5e1ee26f666c85b30e31007e34bd788382d (3) Message-Authenticator = 0x75c8703c7078ea211732e29514301e7f (3) session-state: No cached attributes (3) # Executing section authorize from file /etc/raddb/sites-enabled/ default (3) authorize { (3) policy filter_username { (3) if (!&User-Name) { (3) if (!&User-Name) -> FALSE (3) if (&User-Name =~ / /) { (3) if (&User-Name =~ / /) -> FALSE (3) if (&User-Name =~ /@.*@/ ) { (3) if (&User-Name =~ /@.*@/ ) -> FALSE (3) if (&User-Name =~ /\.\./ ) { (3) if (&User-Name =~ /\.\./ ) -> FALSE (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (3) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (3) if (&User-Name =~ /\.$/) { (3) if (&User-Name =~ /\.$/) -> FALSE (3) if (&User-Name =~ /@\./) { (3) if (&User-Name =~ /@\./) -> FALSE (3) } # policy filter_username = notfound (3) [preprocess] = ok (3) [chap] = noop (3) [mschap] = noop (3) [digest] = noop (3) suffix: Checking for suffix after "@" (3) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (3) suffix: No such realm "NULL" (3) [suffix] = noop (3) eap: Peer sent EAP Response (code 2) ID 213 length 624 (3) eap: Continuing tunnel setup (3) [eap] = ok (3) } # authorize = ok (3) Found Auth-Type = EAP (3) # Executing group from file /etc/raddb/sites-enabled/default (3) authenticate { (3) eap: Expiring EAP session with state 0x2ea7ef802c72f6df (3) eap: Finished EAP session with state 0x2ea7ef802c72f6df (3) eap: Previous EAP request found for state 0x2ea7ef802c72f6df, released from the list (3) eap: Peer sent packet with method EAP PEAP (25) (3) eap: Calling submodule eap_peap to process data (3) eap_peap: Continuing EAP-TLS (3) eap_peap: Peer indicated complete TLS record size will be 614 bytes (3) eap_peap: Got complete TLS record (614 bytes) (3) eap_peap: [eaptls verify] = length included (3) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: <<< TLS 1.2 [length 0206] (3) eap_peap: TLS_accept: SSLv3 read client key exchange A (3) eap_peap: TLS_accept: SSLv3 read certificate verify A (3) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: <<< TLS 1.2 [length 0001] (3) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: <<< TLS 1.2 [length 0010] (3) eap_peap: TLS_accept: SSLv3 read finished A (3) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: >>> TLS 1.2 [length 0001] (3) eap_peap: TLS_accept: SSLv3 write change cipher spec A (3) eap_peap: >>> UNKNOWN TLS VERSION ?0000? [length 0005] (3) eap_peap: >>> TLS 1.2 [length 0010] (3) eap_peap: TLS_accept: SSLv3 write finished A (3) eap_peap: TLS_accept: SSLv3 flush data (3) eap_peap: (other): SSL negotiation finished successfully (3) eap_peap: SSL Connection Established (3) eap_peap: [eaptls process] = handled (3) eap: Sending EAP Request (code 1) ID 214 length 97 (3) eap: EAP session adding &reply:State = 0x2ea7ef802d71f6df (3) [eap] = handled (3) } # authenticate = handled (3) Using Post-Auth-Type Challenge (3) Post-Auth-Type sub-section not found. Ignoring. (3) # Executing group from file /etc/raddb/sites-enabled/default (3) Sent Access-Challenge Id 147 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (3) EAP-Message = 0x01d600611900140303000101160303005079a7c2b0c0613f044ad8f016 dd974af82c9894c546d8e9e79e1aa76f704d6347f83d69f301718c272bb2 84836a51a4f103de7594eb506dbd068b3bc3d59f3e972b591b5a27a1ee88 6d9083331cb2f7a0 (3) Message-Authenticator = 0x00000000000000000000000000000000 (3) State = 0x2ea7ef802d71f6df3693c3c995d521f2 (3) Finished request Waking up in 4.6 seconds. (4) Received Access-Request Id 148 from 10.10.10.169:43523 to 10.10.10.41:1812 length 85 (4) User-Name = "swadmin" (4) NAS-IP-Address = 10.10.10.41 (4) NAS-Port = 0 (4) State = 0x2ea7ef802d71f6df3693c3c995d521f2 (4) EAP-Message = 0x02d600061900 (4) Message-Authenticator = 0xab692927925f945469e6ba632403c514 (4) session-state: No cached attributes (4) # Executing section authorize from file /etc/raddb/sites-enabled/ default (4) authorize { (4) policy filter_username { (4) if (!&User-Name) { (4) if (!&User-Name) -> FALSE (4) if (&User-Name =~ / /) { (4) if (&User-Name =~ / /) -> FALSE (4) if (&User-Name =~ /@.*@/ ) { (4) if (&User-Name =~ /@.*@/ ) -> FALSE (4) if (&User-Name =~ /\.\./ ) { (4) if (&User-Name =~ /\.\./ ) -> FALSE (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (4) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (4) if (&User-Name =~ /\.$/) { (4) if (&User-Name =~ /\.$/) -> FALSE (4) if (&User-Name =~ /@\./) { (4) if (&User-Name =~ /@\./) -> FALSE (4) } # policy filter_username = notfound (4) [preprocess] = ok (4) [chap] = noop (4) [mschap] = noop (4) [digest] = noop (4) suffix: Checking for suffix after "@" (4) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (4) suffix: No such realm "NULL" (4) [suffix] = noop (4) eap: Peer sent EAP Response (code 2) ID 214 length 6 (4) eap: Continuing tunnel setup (4) [eap] = ok (4) } # authorize = ok (4) Found Auth-Type = EAP (4) # Executing group from file /etc/raddb/sites-enabled/default (4) authenticate { (4) eap: Expiring EAP session with state 0x2ea7ef802d71f6df (4) eap: Finished EAP session with state 0x2ea7ef802d71f6df (4) eap: Previous EAP request found for state 0x2ea7ef802d71f6df, released from the list (4) eap: Peer sent packet with method EAP PEAP (25) (4) eap: Calling submodule eap_peap to process data (4) eap_peap: Continuing EAP-TLS (4) eap_peap: Peer ACKed our handshake fragment. handshake is finished (4) eap_peap: [eaptls verify] = success (4) eap_peap: [eaptls process] = success (4) eap_peap: Session established. Decoding tunneled attributes (4) eap_peap: PEAP state TUNNEL ESTABLISHED
UNKNOWN TLS VERSION ?0000? [length 0005] (4) eap: Sending EAP Request (code 1) ID 215 length 75 (4) eap: EAP session adding &reply:State = 0x2ea7ef802a70f6df (4) [eap] = handled (4) } # authenticate = handled (4) Using Post-Auth-Type Challenge (4) Post-Auth-Type sub-section not found. Ignoring. (4) # Executing group from file /etc/raddb/sites-enabled/default (4) Sent Access-Challenge Id 148 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (4) EAP-Message = 0x01d7004b190017030300401aeaef07c9c4a249c81611f692e0264c010b 134b01aa5103124201302cbc7da20e363d84e2df1fa5affdd908edf1fabb bfc2c7ae4b528534d61c7fb2503b991c (4) Message-Authenticator = 0x00000000000000000000000000000000 (4) State = 0x2ea7ef802a70f6df3693c3c995d521f2 (4) Finished request Waking up in 4.6 seconds. (5) Received Access-Request Id 149 from 10.10.10.169:43523 to 10.10.10.41:1812 length 154 (5) User-Name = "swadmin" (5) NAS-IP-Address = 10.10.10.41 (5) NAS-Port = 0 (5) State = 0x2ea7ef802a70f6df3693c3c995d521f2 (5) EAP-Message = 0x02d7004b1900170303004048503b60df80d3cc3e54ca84aced721f1ac4 b552e6154d41dfd00507d9d1d536c231a056c02eae6747ae7787ea269b0c 7320b15d06eba81bd7e8144c2499d9af (5) Message-Authenticator = 0xea1c0115468240cb351d04a41322e224 (5) session-state: No cached attributes (5) # Executing section authorize from file /etc/raddb/sites-enabled/ default (5) authorize { (5) policy filter_username { (5) if (!&User-Name) { (5) if (!&User-Name) -> FALSE (5) if (&User-Name =~ / /) { (5) if (&User-Name =~ / /) -> FALSE (5) if (&User-Name =~ /@.*@/ ) { (5) if (&User-Name =~ /@.*@/ ) -> FALSE (5) if (&User-Name =~ /\.\./ ) { (5) if (&User-Name =~ /\.\./ ) -> FALSE (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (5) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (5) if (&User-Name =~ /\.$/) { (5) if (&User-Name =~ /\.$/) -> FALSE (5) if (&User-Name =~ /@\./) { (5) if (&User-Name =~ /@\./) -> FALSE (5) } # policy filter_username = notfound (5) [preprocess] = ok (5) [chap] = noop (5) [mschap] = noop (5) [digest] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) eap: Peer sent EAP Response (code 2) ID 215 length 75 (5) eap: Continuing tunnel setup (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/default (5) authenticate { (5) eap: Expiring EAP session with state 0x2ea7ef802a70f6df (5) eap: Finished EAP session with state 0x2ea7ef802a70f6df (5) eap: Previous EAP request found for state 0x2ea7ef802a70f6df, released from the list (5) eap: Peer sent packet with method EAP PEAP (25) (5) eap: Calling submodule eap_peap to process data (5) eap_peap: Continuing EAP-TLS (5) eap_peap: [eaptls verify] = ok (5) eap_peap: Done initial handshake (5) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (5) eap_peap: [eaptls process] = ok (5) eap_peap: Session established. Decoding tunneled attributes (5) eap_peap: PEAP state WAITING FOR INNER IDENTITY (5) eap_peap: Identity - swadmin (5) eap_peap: Got inner identity 'swadmin' (5) eap_peap: Setting default EAP type for tunneled EAP session (5) eap_peap: Got tunneled request (5) eap_peap: EAP-Message = 0x02d7000c01737761646d696e (5) eap_peap: Setting User-Name to swadmin (5) eap_peap: Sending tunneled request to inner-tunnel (5) eap_peap: EAP-Message = 0x02d7000c01737761646d696e (5) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (5) eap_peap: User-Name = "swadmin" (5) Virtual server inner-tunnel received request (5) EAP-Message = 0x02d7000c01737761646d696e (5) FreeRADIUS-Proxied-To = 127.0.0.1 (5) User-Name = "swadmin" (5) server inner-tunnel { (5) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (5) authorize { (5) [chap] = noop (5) [mschap] = noop (5) suffix: Checking for suffix after "@" (5) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (5) suffix: No such realm "NULL" (5) [suffix] = noop (5) update control { (5) &Proxy-To-Realm := LOCAL (5) } # update control = noop (5) eap: Peer sent EAP Response (code 2) ID 215 length 12 (5) eap: EAP-Identity reply, returning 'ok' so we can short-circuit the rest of authorize (5) [eap] = ok (5) } # authorize = ok (5) Found Auth-Type = EAP (5) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (5) authenticate { (5) eap: Peer sent packet with method EAP Identity (1) (5) eap: Calling submodule eap_mschapv2 to process data (5) eap_mschapv2: Issuing Challenge (5) eap: Sending EAP Request (code 1) ID 216 length 43 (5) eap: EAP session adding &reply:State = 0x7030667570e87c8f (5) [eap] = handled (5) } # authenticate = handled (5) } # server inner-tunnel (5) Virtual server sending reply (5) EAP-Message = 0x01d8002b1a01d80026103aa0ad783679564939103c1f7b0dc5cb667265 657261646975732d332e302e3130 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x7030667570e87c8f84ba25d6b5fb17c3 (5) eap_peap: Got tunneled reply code 11 (5) eap_peap: EAP-Message = 0x01d8002b1a01d80026103aa0ad783679564939103c1f7b0dc5cb667265 657261646975732d332e302e3130 (5) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (5) eap_peap: State = 0x7030667570e87c8f84ba25d6b5fb17c3 (5) eap_peap: Got tunneled reply RADIUS code 11 (5) eap_peap: EAP-Message = 0x01d8002b1a01d80026103aa0ad783679564939103c1f7b0dc5cb667265 657261646975732d332e302e3130 (5) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (5) eap_peap: State = 0x7030667570e87c8f84ba25d6b5fb17c3 (5) eap_peap: Got tunneled Access-Challenge UNKNOWN TLS VERSION ?0000? [length 0005] (5) eap: Sending EAP Request (code 1) ID 216 length 107 (5) eap: EAP session adding &reply:State = 0x2ea7ef802b7ff6df (5) [eap] = handled (5) } # authenticate = handled (5) Using Post-Auth-Type Challenge (5) Post-Auth-Type sub-section not found. Ignoring. (5) # Executing group from file /etc/raddb/sites-enabled/default (5) Sent Access-Challenge Id 149 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (5) EAP-Message = 0x01d8006b19001703030060c9bdab5d392e1aec871e65586db7025cbca5 ee23a681c6b15b518d3c2177dad94f504c1f91720adde5df703748c43883 ab1007f8b755c9cdaf472c16b9a72788c6a02e5a05e3ec011d943af98faf 54aaa2830d8530eb6df8892cc18b52f38d41 (5) Message-Authenticator = 0x00000000000000000000000000000000 (5) State = 0x2ea7ef802b7ff6df3693c3c995d521f2 (5) Finished request Waking up in 4.6 seconds. (6) Received Access-Request Id 150 from 10.10.10.169:43523 to 10.10.10.41:1812 length 202 (6) User-Name = "swadmin" (6) NAS-IP-Address = 10.10.10.41 (6) NAS-Port = 0 (6) State = 0x2ea7ef802b7ff6df3693c3c995d521f2 (6) EAP-Message = 0x02d8007b190017030300705f59d5dcd2ffacb0f62dc04b137c705df7c0 38f6c4fc41717f0a4ba04f10401556438a673f041b1ad6be8d571a04e9b3 3b0660df6fb81d3e583e1d7da9d4a162f6299601ced4393ee45053db3775 b95da03a66759e2ee8f1440ef8b862aaac03b529721bf89ad6093364f785 (6) Message-Authenticator = 0x3b4888281df61cf5b2e770293b1ccb99 (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/ default (6) authorize { (6) policy filter_username { (6) if (!&User-Name) { (6) if (!&User-Name) -> FALSE (6) if (&User-Name =~ / /) { (6) if (&User-Name =~ / /) -> FALSE (6) if (&User-Name =~ /@.*@/ ) { (6) if (&User-Name =~ /@.*@/ ) -> FALSE (6) if (&User-Name =~ /\.\./ ) { (6) if (&User-Name =~ /\.\./ ) -> FALSE (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (6) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (6) if (&User-Name =~ /\.$/) { (6) if (&User-Name =~ /\.$/) -> FALSE (6) if (&User-Name =~ /@\./) { (6) if (&User-Name =~ /@\./) -> FALSE (6) } # policy filter_username = notfound (6) [preprocess] = ok (6) [chap] = noop (6) [mschap] = noop (6) [digest] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) eap: Peer sent EAP Response (code 2) ID 216 length 123 (6) eap: Continuing tunnel setup (6) [eap] = ok (6) } # authorize = ok (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/default (6) authenticate { (6) eap: Expiring EAP session with state 0x7030667570e87c8f (6) eap: Finished EAP session with state 0x2ea7ef802b7ff6df (6) eap: Previous EAP request found for state 0x2ea7ef802b7ff6df, released from the list (6) eap: Peer sent packet with method EAP PEAP (25) (6) eap: Calling submodule eap_peap to process data (6) eap_peap: Continuing EAP-TLS (6) eap_peap: [eaptls verify] = ok (6) eap_peap: Done initial handshake (6) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (6) eap_peap: [eaptls process] = ok (6) eap_peap: Session established. Decoding tunneled attributes (6) eap_peap: PEAP state phase2 (6) eap_peap: EAP method MSCHAPv2 (26) (6) eap_peap: Got tunneled request (6) eap_peap: EAP-Message = 0x02d800431a02d8003f316652b1aeefe86844cec805f6771b6747000000 00000000007bf917464e3670b7150d2f0124303d00ab612db1096bf76a00 737761646d696e00 (6) eap_peap: Setting User-Name to swadmin (6) eap_peap: Sending tunneled request to inner-tunnel (6) eap_peap: EAP-Message = 0x02d800431a02d8003f316652b1aeefe86844cec805f6771b6747000000 00000000007bf917464e3670b7150d2f0124303d00ab612db1096bf76a00 737761646d696e00 (6) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (6) eap_peap: User-Name = "swadmin" (6) eap_peap: State = 0x7030667570e87c8f84ba25d6b5fb17c3 (6) Virtual server inner-tunnel received request (6) EAP-Message = 0x02d800431a02d8003f316652b1aeefe86844cec805f6771b6747000000 00000000007bf917464e3670b7150d2f0124303d00ab612db1096bf76a00 737761646d696e00 (6) FreeRADIUS-Proxied-To = 127.0.0.1 (6) User-Name = "swadmin" (6) State = 0x7030667570e87c8f84ba25d6b5fb17c3 (6) server inner-tunnel { (6) session-state: No cached attributes (6) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (6) authorize { (6) [chap] = noop (6) [mschap] = noop (6) suffix: Checking for suffix after "@" (6) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (6) suffix: No such realm "NULL" (6) [suffix] = noop (6) update control { (6) &Proxy-To-Realm := LOCAL (6) } # update control = noop (6) eap: Peer sent EAP Response (code 2) ID 216 length 67 (6) eap: No EAP Start, assuming it's an on-going EAP conversation (6) [eap] = updated (6) files: users: Matched entry swadmin at line 240 (6) [files] = ok (6) [expiration] = noop (6) [logintime] = noop (6) pap: WARNING: Auth-Type already set. Not setting to PAP (6) [pap] = noop (6) } # authorize = updated (6) Found Auth-Type = EAP (6) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) authenticate { (6) eap: Expiring EAP session with state 0x7030667570e87c8f (6) eap: Finished EAP session with state 0x7030667570e87c8f (6) eap: Previous EAP request found for state 0x7030667570e87c8f, released from the list (6) eap: Peer sent packet with method EAP MSCHAPv2 (26) (6) eap: Calling submodule eap_mschapv2 to process data (6) eap_mschapv2: # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (6) eap_mschapv2: Auth-Type MS-CHAP { (6) mschap: Found Cleartext-Password, hashing to create NT-Password (6) mschap: Found Cleartext-Password, hashing to create LM-Password (6) mschap: WARNING: User-Name (swadmin) is not the same as MS-CHAP Name (swadmin) from EAP-MSCHAPv2 (6) mschap: Creating challenge hash with username: swadmin (6) mschap: Client is using MS-CHAPv2 (6) mschap: Adding MS-CHAPv2 MPPE keys (6) [mschap] = ok (6) } # Auth-Type MS-CHAP = ok (6) MSCHAP Success (6) eap: Sending EAP Request (code 1) ID 217 length 51 (6) eap: EAP session adding &reply:State = 0x7030667571e97c8f (6) [eap] = handled (6) } # authenticate = handled (6) } # server inner-tunnel (6) Virtual server sending reply (6) Brocade-Auth-Role = "admin" (6) Brocade-AVPairs1 = "HomeLF=128" (6) Brocade-AVPairs2 = "LFRoleList=admin:1-128" (6) Brocade-AVPairs3 = "ChassisRole=admin" (6) EAP-Message = 0x01d900331a03d8002e533d434332313630303943344443463333414630 38384439363345333045323745323143323639334430 (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x7030667571e97c8f84ba25d6b5fb17c3 (6) eap_peap: Got tunneled reply code 11 (6) eap_peap: Brocade-Auth-Role = "admin" (6) eap_peap: Brocade-AVPairs1 = "HomeLF=128" (6) eap_peap: Brocade-AVPairs2 = "LFRoleList=admin:1-128" (6) eap_peap: Brocade-AVPairs3 = "ChassisRole=admin" (6) eap_peap: EAP-Message = 0x01d900331a03d8002e533d434332313630303943344443463333414630 38384439363345333045323745323143323639334430 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x7030667571e97c8f84ba25d6b5fb17c3 (6) eap_peap: Got tunneled reply RADIUS code 11 (6) eap_peap: Brocade-Auth-Role = "admin" (6) eap_peap: Brocade-AVPairs1 = "HomeLF=128" (6) eap_peap: Brocade-AVPairs2 = "LFRoleList=admin:1-128" (6) eap_peap: Brocade-AVPairs3 = "ChassisRole=admin" (6) eap_peap: EAP-Message = 0x01d900331a03d8002e533d434332313630303943344443463333414630 38384439363345333045323745323143323639334430 (6) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (6) eap_peap: State = 0x7030667571e97c8f84ba25d6b5fb17c3 (6) eap_peap: Got tunneled Access-Challenge UNKNOWN TLS VERSION ?0000? [length 0005] (6) eap: Sending EAP Request (code 1) ID 217 length 107 (6) eap: EAP session adding &reply:State = 0x2ea7ef80287ef6df (6) [eap] = handled (6) } # authenticate = handled (6) Using Post-Auth-Type Challenge (6) Post-Auth-Type sub-section not found. Ignoring. (6) # Executing group from file /etc/raddb/sites-enabled/default (6) Sent Access-Challenge Id 150 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (6) EAP-Message = 0x01d9006b190017030300607af71da555afee854417f9ca8e0d54adeb16 6c468816e5f79198f9c51a1c75a15ba3ee3ad04597d52f18f53731dd9d81 373dc08cfbe3bc2af50908a436103b48139bb885bc58eb99b30ffe9b0a1f eb3450ba960c330f7dbc8e74efe62425f82a (6) Message-Authenticator = 0x00000000000000000000000000000000 (6) State = 0x2ea7ef80287ef6df3693c3c995d521f2 (6) Finished request Waking up in 4.6 seconds. (7) Received Access-Request Id 151 from 10.10.10.169:43523 to 10.10.10.41:1812 length 154 (7) User-Name = "swadmin" (7) NAS-IP-Address = 10.10.10.41 (7) NAS-Port = 0 (7) State = 0x2ea7ef80287ef6df3693c3c995d521f2 (7) EAP-Message = 0x02d9004b19001703030040bfc9701f5762ef472c945d8001dd2ae2d1ee 074f1254e15e01e6ef9195ef06d156e93d2355429b2fd9fec886e321c35e 790418b1f96facfc49cd17a6bd53e33c (7) Message-Authenticator = 0x4ad3f2e68b3d6b1e81fbf9a43a93215f (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/ default (7) authorize { (7) policy filter_username { (7) if (!&User-Name) { (7) if (!&User-Name) -> FALSE (7) if (&User-Name =~ / /) { (7) if (&User-Name =~ / /) -> FALSE (7) if (&User-Name =~ /@.*@/ ) { (7) if (&User-Name =~ /@.*@/ ) -> FALSE (7) if (&User-Name =~ /\.\./ ) { (7) if (&User-Name =~ /\.\./ ) -> FALSE (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (7) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (7) if (&User-Name =~ /\.$/) { (7) if (&User-Name =~ /\.$/) -> FALSE (7) if (&User-Name =~ /@\./) { (7) if (&User-Name =~ /@\./) -> FALSE (7) } # policy filter_username = notfound (7) [preprocess] = ok (7) [chap] = noop (7) [mschap] = noop (7) [digest] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) eap: Peer sent EAP Response (code 2) ID 217 length 75 (7) eap: Continuing tunnel setup (7) [eap] = ok (7) } # authorize = ok (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/default (7) authenticate { (7) eap: Expiring EAP session with state 0x7030667571e97c8f (7) eap: Finished EAP session with state 0x2ea7ef80287ef6df (7) eap: Previous EAP request found for state 0x2ea7ef80287ef6df, released from the list (7) eap: Peer sent packet with method EAP PEAP (25) (7) eap: Calling submodule eap_peap to process data (7) eap_peap: Continuing EAP-TLS (7) eap_peap: [eaptls verify] = ok (7) eap_peap: Done initial handshake (7) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (7) eap_peap: [eaptls process] = ok (7) eap_peap: Session established. Decoding tunneled attributes (7) eap_peap: PEAP state phase2 (7) eap_peap: EAP method MSCHAPv2 (26) (7) eap_peap: Got tunneled request (7) eap_peap: EAP-Message = 0x02d900061a03 (7) eap_peap: Setting User-Name to swadmin (7) eap_peap: Sending tunneled request to inner-tunnel (7) eap_peap: EAP-Message = 0x02d900061a03 (7) eap_peap: FreeRADIUS-Proxied-To = 127.0.0.1 (7) eap_peap: User-Name = "swadmin" (7) eap_peap: State = 0x7030667571e97c8f84ba25d6b5fb17c3 (7) Virtual server inner-tunnel received request (7) EAP-Message = 0x02d900061a03 (7) FreeRADIUS-Proxied-To = 127.0.0.1 (7) User-Name = "swadmin" (7) State = 0x7030667571e97c8f84ba25d6b5fb17c3 (7) server inner-tunnel { (7) session-state: No cached attributes (7) # Executing section authorize from file /etc/raddb/sites-enabled/inner-tunnel (7) authorize { (7) [chap] = noop (7) [mschap] = noop (7) suffix: Checking for suffix after "@" (7) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (7) suffix: No such realm "NULL" (7) [suffix] = noop (7) update control { (7) &Proxy-To-Realm := LOCAL (7) } # update control = noop (7) eap: Peer sent EAP Response (code 2) ID 217 length 6 (7) eap: No EAP Start, assuming it's an on-going EAP conversation (7) [eap] = updated (7) files: users: Matched entry swadmin at line 240 (7) [files] = ok (7) [expiration] = noop (7) [logintime] = noop (7) pap: WARNING: Auth-Type already set. Not setting to PAP (7) [pap] = noop (7) } # authorize = updated (7) Found Auth-Type = EAP (7) # Executing group from file /etc/raddb/sites-enabled/inner-tunnel (7) authenticate { (7) eap: Expiring EAP session with state 0x7030667571e97c8f (7) eap: Finished EAP session with state 0x7030667571e97c8f (7) eap: Previous EAP request found for state 0x7030667571e97c8f, released from the list (7) eap: Peer sent packet with method EAP MSCHAPv2 (26) (7) eap: Calling submodule eap_mschapv2 to process data (7) eap: Sending EAP Success (code 3) ID 217 length 4 (7) eap: Freeing handler (7) [eap] = ok (7) } # authenticate = ok (7) # Executing section post-auth from file /etc/raddb/sites-enabled/inner-tunnel (7) post-auth { ... } # empty sub-section is ignored (7) } # server inner-tunnel (7) Virtual server sending reply (7) Brocade-Auth-Role = "admin" (7) Brocade-AVPairs1 = "HomeLF=128" (7) Brocade-AVPairs2 = "LFRoleList=admin:1-128" (7) Brocade-AVPairs3 = "ChassisRole=admin" (7) MS-MPPE-Encryption-Policy = Encryption-Allowed (7) MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) MS-MPPE-Send-Key = 0x33b6ff31bf787acfda637a13cde3cf97 (7) MS-MPPE-Recv-Key = 0x47724e674b3ac6f2ad8658bac3500c47 (7) EAP-Message = 0x03d90004 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) User-Name = "swadmin" (7) eap_peap: Got tunneled reply code 2 (7) eap_peap: Brocade-Auth-Role = "admin" (7) eap_peap: Brocade-AVPairs1 = "HomeLF=128" (7) eap_peap: Brocade-AVPairs2 = "LFRoleList=admin:1-128" (7) eap_peap: Brocade-AVPairs3 = "ChassisRole=admin" (7) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (7) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) eap_peap: MS-MPPE-Send-Key = 0x33b6ff31bf787acfda637a13cde3cf97 (7) eap_peap: MS-MPPE-Recv-Key = 0x47724e674b3ac6f2ad8658bac3500c47 (7) eap_peap: EAP-Message = 0x03d90004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: User-Name = "swadmin" (7) eap_peap: Got tunneled reply RADIUS code 2 (7) eap_peap: Brocade-Auth-Role = "admin" (7) eap_peap: Brocade-AVPairs1 = "HomeLF=128" (7) eap_peap: Brocade-AVPairs2 = "LFRoleList=admin:1-128" (7) eap_peap: Brocade-AVPairs3 = "ChassisRole=admin" (7) eap_peap: MS-MPPE-Encryption-Policy = Encryption-Allowed (7) eap_peap: MS-MPPE-Encryption-Types = RC4-40or128-bit-Allowed (7) eap_peap: MS-MPPE-Send-Key = 0x33b6ff31bf787acfda637a13cde3cf97 (7) eap_peap: MS-MPPE-Recv-Key = 0x47724e674b3ac6f2ad8658bac3500c47 (7) eap_peap: EAP-Message = 0x03d90004 (7) eap_peap: Message-Authenticator = 0x00000000000000000000000000000000 (7) eap_peap: User-Name = "swadmin" (7) eap_peap: Tunneled authentication was successful (7) eap_peap: SUCCESS UNKNOWN TLS VERSION ?0000? [length 0005] (7) eap: Sending EAP Request (code 1) ID 218 length 75 (7) eap: EAP session adding &reply:State = 0x2ea7ef80297df6df (7) [eap] = handled (7) } # authenticate = handled (7) Using Post-Auth-Type Challenge (7) Post-Auth-Type sub-section not found. Ignoring. (7) # Executing group from file /etc/raddb/sites-enabled/default (7) Sent Access-Challenge Id 151 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (7) EAP-Message = 0x01da004b190017030300400b6d3844237e81e2b4974b625b0d106880b7 33bac6465822e027576124a9bb1dbf6116625a93ba3591752ee1b02bae72 5bd54f609388e86a03663eb050bdf265 (7) Message-Authenticator = 0x00000000000000000000000000000000 (7) State = 0x2ea7ef80297df6df3693c3c995d521f2 (7) Finished request Waking up in 4.6 seconds. (8) Received Access-Request Id 152 from 10.10.10.169:43523 to 10.10.10.41:1812 length 154 (8) User-Name = "swadmin" (8) NAS-IP-Address = 10.10.10.41 (8) NAS-Port = 0 (8) State = 0x2ea7ef80297df6df3693c3c995d521f2 (8) EAP-Message = 0x02da004b190017030300401ca8412f64b2a64783cf02e13ce56d48eac7 1bb1b7c912704f95673053ba6c48d8c6ba5ef6f1b92680a2b631c14a91a9 eb4642700ff61364ff94957617797d39 (8) Message-Authenticator = 0x9e7abcbbcd46d0a587f3205bd42b3df2 (8) session-state: No cached attributes (8) # Executing section authorize from file /etc/raddb/sites-enabled/ default (8) authorize { (8) policy filter_username { (8) if (!&User-Name) { (8) if (!&User-Name) -> FALSE (8) if (&User-Name =~ / /) { (8) if (&User-Name =~ / /) -> FALSE (8) if (&User-Name =~ /@.*@/ ) { (8) if (&User-Name =~ /@.*@/ ) -> FALSE (8) if (&User-Name =~ /\.\./ ) { (8) if (&User-Name =~ /\.\./ ) -> FALSE (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (8) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (8) if (&User-Name =~ /\.$/) { (8) if (&User-Name =~ /\.$/) -> FALSE (8) if (&User-Name =~ /@\./) { (8) if (&User-Name =~ /@\./) -> FALSE (8) } # policy filter_username = notfound (8) [preprocess] = ok (8) [chap] = noop (8) [mschap] = noop (8) [digest] = noop (8) suffix: Checking for suffix after "@" (8) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (8) suffix: No such realm "NULL" (8) [suffix] = noop (8) eap: Peer sent EAP Response (code 2) ID 218 length 75 (8) eap: Continuing tunnel setup (8) [eap] = ok (8) } # authorize = ok (8) Found Auth-Type = EAP (8) # Executing group from file /etc/raddb/sites-enabled/default (8) authenticate { (8) eap: Expiring EAP session with state 0x2ea7ef80297df6df (8) eap: Finished EAP session with state 0x2ea7ef80297df6df (8) eap: Previous EAP request found for state 0x2ea7ef80297df6df, released from the list (8) eap: Peer sent packet with method EAP PEAP (25) (8) eap: Calling submodule eap_peap to process data (8) eap_peap: Continuing EAP-TLS (8) eap_peap: [eaptls verify] = ok (8) eap_peap: Done initial handshake (8) eap_peap: <<< UNKNOWN TLS VERSION ?0000? [length 0005] (8) eap_peap: [eaptls process] = ok (8) eap_peap: Session established. Decoding tunneled attributes (8) eap_peap: PEAP state send tlv success (8) eap_peap: Received EAP-TLV response (8) eap_peap: Success (8) eap_peap: No information to cache: session caching will be disabled for session c929510df244ed060c53cd90e9b2940df2add6e931aeaca3a7602f0ec476608b (8) eap: Sending EAP Success (code 3) ID 218 length 4 (8) eap: Freeing handler (8) [eap] = ok (8) } # authenticate = ok (8) # Executing section post-auth from file /etc/raddb/sites-enabled/ default (8) post-auth { (8) update { (8) No attributes updated (8) } # update = noop (8) [exec] = noop (8) policy remove_reply_message_if_eap { (8) if (&reply:EAP-Message && &reply:Reply-Message) { (8) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (8) else { (8) [noop] = noop (8) } # else = noop (8) } # policy remove_reply_message_if_eap = noop (8) } # post-auth = noop (8) Sent Access-Accept Id 152 from 10.10.10.41:1812 to 10.10.10.169:43523 length 0 (8) MS-MPPE-Recv-Key = 0xb2cc66124674f4d4f89ec8157c5cf0d0aff128a59ca2639710ca2b4ee8f104b3 (8) MS-MPPE-Send-Key = 0xa9d0387844078ce9b898d64c14b05afaae367e89184f9557a85cb24f79b16f93 (8) EAP-Message = 0x03da0004 (8) Message-Authenticator = 0x00000000000000000000000000000000 (8) User-Name = "swadmin" (8) Finished request Waking up in 4.6 seconds. (9) Received Accounting-Request Id 7 from 10.10.10.169:18022 to 10.10.10.41:1813 length 85 (9) User-Name = "swadmin" (9) NAS-IP-Address = 10.10.10.169 (9) NAS-Identifier = "HuaweiWedgeSec" (9) NAS-Port = 16997 (9) NAS-Port-Type = Virtual (9) Acct-Status-Type = Start (9) Acct-Session-Id = "00016997" (9) Acct-Authentic = RADIUS (9) # Executing section preacct from file /etc/raddb/sites-enabled/default (9) preacct { (9) [preprocess] = ok (9) policy acct_unique { (9) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) { (9) EXPAND %{string:Class} (9) --> (9) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) -> FALSE (9) else { (9) update request { (9) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6- Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (9) --> 767dde204e68d7d421422d0bcd251691 (9) &Acct-Unique-Session-Id := 767dde204e68d7d421422d0bcd251691 (9) } # update request = noop (9) } # else = noop (9) } # policy acct_unique = noop (9) suffix: Checking for suffix after "@" (9) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (9) suffix: No such realm "NULL" (9) [suffix] = noop (9) [files] = noop (9) } # preacct = ok (9) # Executing section accounting from file /etc/raddb/sites-enabled/default (9) accounting { (9) detail: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d (9) detail: --> /var/log/radius/radacct/10.10.10.169/detail-20170919 (9) detail: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.10.10.169/detail-20170919 (9) detail: EXPAND %t (9) detail: --> Tue Sep 19 14:50:25 2017 (9) [detail] = ok (9) [unix] = ok (9) [exec] = noop (9) attr_filter.accounting_response: EXPAND %{User-Name} (9) attr_filter.accounting_response: --> swadmin (9) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (9) [attr_filter.accounting_response] = updated (9) } # accounting = updated (9) Sent Accounting-Response Id 7 from 10.10.10.41:1813 to 10.10.10.169:18022 length 0 (9) Finished request (9) Cleaning up request packet ID 7 with timestamp +226 Waking up in 4.4 seconds. (10) Received Accounting-Request Id 183 from 10.10.10.169:18022 to 10.10.10.41:1813 length 91 (10) User-Name = "swadmin" (10) NAS-IP-Address = 10.10.10.169 (10) NAS-Identifier = "HuaweiWedgeSec" (10) NAS-Port = 16997 (10) NAS-Port-Type = Virtual (10) Acct-Status-Type = Stop (10) Acct-Session-Id = "00016997" (10) Acct-Authentic = RADIUS (10) Acct-Session-Time = 0 (10) # Executing section preacct from file /etc/raddb/sites-enabled/ default (10) preacct { (10) [preprocess] = ok (10) policy acct_unique { (10) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) { (10) EXPAND %{string:Class} (10) --> (10) if ("%{string:Class}" =~ /ai:([0-9a-f]{32})/i) -> FALSE (10) else { (10) update request { (10) EXPAND %{md5:%{User-Name},%{Acct-Session-ID},%{%{NAS-IPv6- Address}:-%{NAS-IP-Address}},%{NAS-Identifier},%{NAS-Port-ID},%{NAS-Port}} (10) --> 767dde204e68d7d421422d0bcd251691 (10) &Acct-Unique-Session-Id := 767dde204e68d7d421422d0bcd251691 (10) } # update request = noop (10) } # else = noop (10) } # policy acct_unique = noop (10) suffix: Checking for suffix after "@" (10) suffix: No '@' in User-Name = "swadmin", looking up realm NULL (10) suffix: No such realm "NULL" (10) [suffix] = noop (10) [files] = noop (10) } # preacct = ok (10) # Executing section accounting from file /etc/raddb/sites-enabled/default (10) accounting { (10) detail: EXPAND /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d (10) detail: --> /var/log/radius/radacct/10.10.10.169/detail-20170919 (10) detail: /var/log/radius/radacct/%{%{Packet-Src-IP-Address}:-%{ Packet-Src-IPv6-Address}}/detail-%Y%m%d expands to /var/log/radius/radacct/10.10.10.169/detail-20170919 (10) detail: EXPAND %t (10) detail: --> Tue Sep 19 14:50:25 2017 (10) [detail] = ok (10) [unix] = ok (10) [exec] = noop (10) attr_filter.accounting_response: EXPAND %{User-Name} (10) attr_filter.accounting_response: --> swadmin (10) attr_filter.accounting_response: Matched entry DEFAULT at line 12 (10) [attr_filter.accounting_response] = updated (10) } # accounting = updated (10) Sent Accounting-Response Id 183 from 10.10.10.41:1813 to 10.10.10.169:18022 length 0 (10) Finished request
I attempted to start radiusd with -Xx in case that is helpful, but I still am not sure if this is reading the dictionary.
My users contains:
swadmin Cleartext-Password := "supersecret" Brocade-Auth-Role = "admin", Brocade-AVPairs1 = "HomeLF=128", Brocade-AVPairs2 = "LFRoleList=admin:1-128", Brocade-AVPairs3 = "ChassisRole=admin"
swuser Cleartext-Password := "supersecret" Brocade-Auth-Role = "user", Brocade-AVPairs1 = "HomeLF=128", Brocade-AVPairs2 = "LFRoleList=user:1-128", Brocade-AVPairs3 = "ChassisRole=user", Brocade-Passwd-ExpiryDate = "10/01/2017", Brocade-Passwd-WarnPeriod = "31"
Thanks for any assistance,
Chris - List info/subscribe/unsubscribe? See http://www.freeradius.org/ list/users.html