I've looked into the pcap file. WiMAX-HA-RK-Lifetime, WiMAX-HA-RK-SPI, WiMAX-HA-RK-Key, and WiMAX-FA-RK-SPI attributes are there. My Wireshark does not show their names, but they are there: WiMAX-HA-RL-Lifetime = 900 VSA: l=7 t=Unknown-Attribute(17): 0000000384 WiMAX-HA-RK-SPI = 0 VSA: l=7 t=Unknown-Attribute(16): 0000000000 WiMAX-HA-RK-Key = 0xA2DD89C4... VSA: l=37 t=Unknown-Attribute(15): 00A2DD89C4... WiMAX-FA-RK-SPI = 2474926121 VSA: l=7 t=Unknown-Attribute(61): 0093846029 Go ask ASN-GW vendor what's going on. Rathod Subhashchandra wrote:
Dear Fajar,
ACCESS-ACCEPT screen logs shows following attributes but not in pcap. Screen logs: Sending Access-Accept of id 6 to 125.125.40.38 port 1812 WiMAX-MN-NAI = "user@tataelxsi.com" Service-Type = Authenticate-Only State = 0xd2be425bd6b84f57c4a7ea648e1803b6 MS-MPPE-Recv-Key = 0xd967448623358aa2149aee72c8d59c7640ca9b7fb4c06836781533bb9ae7679d MS-MPPE-Send-Key = 0x49a17afa5f030067f31c8a3e44d14e88a312af0a90e1299e73019fa1c27e7fb3 WiMAX-MSK = 0xd967448623358aa2149aee72c8d59c7640ca9b7fb4c06836781533bb9ae7679d49a17afa5f 030067f31c8a3e44d14e88a312af0a90e1299e73019fa1c27e7fb3 EAP-Message = 0x03060004 Message-Authenticator = 0x00000000000000000000000000000000 User-Name = "user@tataelxsi.com" WiMAX-IP-Technology = PMIP4 WiMAX-hHA-IP-MIP4 = 172.16.104.175 WiMAX-DNS-Server = 192.168.10.3 WiMAX-Accounting-Capabilities = IP-Session-Based WiMAX-Idle-Mode-Notification-Cap = Supported WiMAX-AAA-Session-Id = 0x30313032 WiMAX-Packet-Data-Flow-Id = 1 WiMAX-Service-Data-Flow-Id = 1 WiMAX-Service-Profile-Id = 1 WiMAX-Direction = Bi-Directional WiMAX-FA-RK-Key = 0xb977ed6f9bf2231bba840d7cf1c02cd1bd7f47fa Framed-IP-Address = 192.168.10.3 Session-Timeout = 172800 Termination-Action = 3 Chargeable-User-Identity = "user@tataelxsi.com" WiMAX-HA-RK-Lifetime = 900 WiMAX-HA-RK-SPI = 0 WiMAX-HA-RK-Key = 0x2b83c9fd0e5c3e2f8af0aa4464ba27ff8372fe4b WiMAX-FA-RK-SPI = 2474926121
The content of Wireshark is attached. Wireshark ACCESS-ACCEPT message does not reflect WiMAX-HA-RK-Lifetime, WiMAX-HA-RK-SPI, WiMAX-HA-RK-Key, and WiMAX-FA-RK-SPI.
Does it mean that above attributes are not added in the message and simply printed by FreeRadius server? Or Vendor specific HA mode parameters are different?