Had some good progress here. Main issue here was that my virtual server in default was receiving the Access-Request packets and i also did not have a listen section in my dynamic_clients file. Now i can see all the packet info which i can do whatever I want with python. Thanks, Dave On Jan 26, 2022, 5:16 PM -0500, Dave Macias <davama@gmail.com>, wrote:
oh my....
Just realized something. I missed setting the dynamic clients for this client.... Ok, let me do that. I'll report back.
Apologies ahead of time if making unnecessary noise.
On Wed, Jan 26, 2022 at 5:13 PM Dave Macias <davama@gmail.com> wrote:
Hello,
First of all, thank you for this post: https://blog.sys4.de/freeradius-clients-netbox-en.html We are in the process of integrating netbox into our infra and this post got me pretty excited.
Followed this guide and i was able to see the request as expected https://wiki.freeradius.org/modules/Rlm_python
(0) [preprocess] = ok *** authorize *** *** radlog call in authorize ***
(('User-Name', 'myusername'), ('User-Password', 'mysecretpassword'), ('NAS-IPv6-Address', 'xxx:xxx:xx:xxx:21c:2eff:fe57:cd00'), ('NAS-Identifier', 'myswitchname'), ('NAS-Port-Type', 'Virtual'), ('Service-Type', 'NAS-Prompt-User'), ('Message-Authenticator', '0xasdfasdfasdf231234512asdfasd'), ('MS-RAS-Vendor', '11'), ('Calling-Station-Id', 'xx:xxx:xxx:12'), ('Event-Timestamp', 'Jan 26 2022 13:34:21 EST'), ('Huntgroup-Name', 'switch'))
{} (0) [python3] = ok
According to the python code on the netbox post, i should be able to store the secret into netbox. Since im still in my testing phase, I wanted to see the secret. I thought it would show by print(p) but it does not.
So my question, where is the secret ? How can i see it if possible?
Thank you again for the very interesting posts!
Best, Dave