Hello! We have a Cisco Wireless Controller 5508 with Aironet 1041 APs. To make the AP authenticate with RADIUS we need to set the following command manually in the AP: - radius-server vsa send Which as explained by cisco does the following: Command Purpose Router(config)# *radius-server vsa send* [*accounting* | *authentication*] Enables the network access server to recognize and use VSAs as defined by RADIUS IETF attribute 26. The thing is, the APs can only authenticate if this command is issued in the AP by cli and we need that the Wireless Controller can pass this configuration to the APs, which it doesn't support. So, anyone know why is it necessary and if there is another alternative or workaround to make it work without it? Nowadays we schedule a script to log in the AP and run the command. Thanks in advance.