On Oct 23, 2019, at 9:52 AM, Burger, Wolfgang <wburger@gwdg.de> wrote:
I´m using FreeRADIUS Version 2.1.12 to dynamically set the VLAN-ID on some switches by client-mac-address.
Works like a charm.
That's good. But you should really use 2.2.10.
I have to modify the logfiles and would like to use linelog.
This is my linelog config:
OK, that should work.
And this is a Request and Reply for a VLAN-Request: .. [vlanlog] expand: %S: %{reply:Packet-Type} AAA-VLAN-Request for %{User-Name} on %{NAS-Identifier} (%{NAS-IP-Address}) at Port %{NAS-Port-Id}. -> 2019-10-23 14:27:54: Access-Accept AAA-VLAN-Request for 0cc47a96a6af on Switch31 (192.168.1.141) at Port 41.
Which is NOT the linelog configuration you posted above.
I would like to include the information in "Tunnel-Private-Group-Id" into the linelog.
I´ve tried to add %{reply:Tunnel-Private-Group-Id} to the linelog config.
The configuration you posted above shows you did tat,
But the result in vlanlog is:
2019-10-23 15:42:53: Access-Accept AAA-VLAN-Request for 0cc47a96a6af on Switch31 (192.168.1.141) at Port 41. Put to VLAN
<sigh> Post the debug output from when it doesn't work. Why post the other debug out, from when you *didn't* add the VLAN information? If you want us to help you, you have to post the *relevant* debug output.
How can i include the information in "Tunnel-Private-Group-Id" of Access-Accept into the linelog logfile?
Configure it and it should work. If it doesn't, post the debug output from WHERE IT DOESN'T WORK. Alan DeKok.