Sorry Alan. Here is the full log: (0) Received Access-Request Id 124 from 127.0.0.1:45676 to 127.0.0.1:1812 length 74 (0) User-Name = "piet" (0) User-Password = "P0mp!es" (0) NAS-IP-Address = 192.168.7.203 (0) NAS-Port = 0 (0) Message-Authenticator = 0xb574f29bb2356cb5b1aa5f3b5625ae39 (0) # Executing section authorize from file /etc/raddb/sites-enabled/default (0) authorize { (0) policy filter_username { (0) if (&User-Name) { (0) if (&User-Name) -> TRUE (0) if (&User-Name) { (0) if (&User-Name =~ / /) { (0) if (&User-Name =~ / /) -> FALSE (0) if (&User-Name =~ /@[^@]*@/ ) { (0) if (&User-Name =~ /@[^@]*@/ ) -> FALSE (0) if (&User-Name =~ /\.\./ ) { (0) if (&User-Name =~ /\.\./ ) -> FALSE (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) { (0) if ((&User-Name =~ /@/) && (&User-Name !~ /@(.+)\.(.+)$/)) -> FALSE (0) if (&User-Name =~ /\.$/) { (0) if (&User-Name =~ /\.$/) -> FALSE (0) if (&User-Name =~ /@\./) { (0) if (&User-Name =~ /@\./) -> FALSE (0) } # if (&User-Name) = notfound (0) } # policy filter_username = notfound (0) [preprocess] = ok (0) [chap] = noop (0) [mschap] = noop (0) [digest] = noop (0) suffix: Checking for suffix after "@" (0) suffix: No '@' in User-Name = "piet", looking up realm NULL (0) suffix: No such realm "NULL" (0) [suffix] = noop (0) eap: No EAP-Message, not doing EAP (0) [eap] = noop (0) [files] = noop (0) sql: EXPAND %{User-Name} (0) sql: --> piet (0) sql: SQL-User-Name set to 'piet' rlm_sql (sql): Reserved connection (1) (0) sql: EXPAND SELECT id, username, attribute, value, op FROM radcheck WHERE username = '%{SQL-User-Name}' ORDER BY id (0) sql: --> SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'piet' ORDER BY id (0) sql: Executing select query: SELECT id, username, attribute, value, op FROM radcheck WHERE username = 'piet' ORDER BY id (0) sql: WARNING: User not found in radcheck table. rlm_sql (sql): Reserved connection (2) rlm_sql (sql): Released connection (2) Need 5 more connections to reach 10 spares rlm_sql (sql): Opening additional connection (6), 1 of 26 pending slots used rlm_sql_mysql: Starting connect to MySQL server rlm_sql_mysql: Connected to database 'radius' on Localhost via UNIX socket, server version 10.3.28-MariaDB, protocol version 10 (0) sql: EXPAND SELECT groupname FROM radusergroup WHERE username = '%{SQL-User-Name}' ORDER BY priority (0) sql: --> SELECT groupname FROM radusergroup WHERE username = 'piet' ORDER BY priority (0) sql: Executing select query: SELECT groupname FROM radusergroup WHERE username = 'piet' ORDER BY priority (0) sql: User not found in any groups rlm_sql (sql): Released connection (1) (0) [sql] = notfound (0) [expiration] = noop (0) [logintime] = noop (0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject (0) Failed to authenticate the user (0) Using Post-Auth-Type Reject (0) # Executing group from file /etc/raddb/sites-enabled/default (0) Post-Auth-Type REJECT { (0) sql: EXPAND .query (0) sql: --> .query (0) sql: Using query template 'query' rlm_sql (sql): Reserved connection (3) (0) sql: EXPAND %{User-Name} (0) sql: --> piet (0) sql: SQL-User-Name set to 'piet' (0) sql: EXPAND INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( '%{SQL-User-Name}', '%{%{User-Password}:-%{Chap-Password}}', '%{reply:Packet-Type}', '%S') (0) sql: --> INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'piet', 'P0mp=3D21es', 'Access-Reject', '2021-06-07 07:13:41') (0) sql: Executing query: INSERT INTO radpostauth (username, pass, reply, authdate) VALUES ( 'piet', 'P0mp=3D21es', 'Access-Reject', '2021-06-07 07:13:41') (0) sql: SQL query returned: success (0) sql: 1 record(s) updated rlm_sql (sql): Released connection (3) (0) [sql] = ok (0) attr_filter.access_reject: EXPAND %{User-Name} (0) attr_filter.access_reject: --> piet (0) attr_filter.access_reject: Matched entry DEFAULT at line 11 (0) [attr_filter.access_reject] = updated (0) [eap] = noop (0) policy remove_reply_message_if_eap { (0) if (&reply:EAP-Message && &reply:Reply-Message) { (0) if (&reply:EAP-Message && &reply:Reply-Message) -> FALSE (0) else { (0) [noop] = noop (0) } # else = noop (0) } # policy remove_reply_message_if_eap = noop (0) } # Post-Auth-Type REJECT = updated (0) Delaying response for 1.000000 seconds Waking up in 0.3 seconds. Waking up in 0.6 seconds. (0) Sending delayed response (0) Sent Access-Reject Id 124 from 127.0.0.1:1812 to 127.0.0.1:45676 length 20 Waking up in 3.9 seconds. (0) Cleaning up request packet ID 124 with timestamp +38 Ready to process requests
Message: 2 Date: Fri, 4 Jun 2021 08:53:39 -0400 From: Alan DeKok <aland@deployingradius.com> To: FreeRadius users mailing list <freeradius-users@lists.freeradius.org> Subject: Re: ntlm_auth not being invoked Message-ID: <FADA674B-6BA4-4C28-AAFA-33DCD569C193@deployingradius.com> Content-Type: text/plain; charset=us-ascii
On Jun 4, 2021, at 8:02 AM, Shaun donovan via Freeradius-Users <freeradius-users@lists.freeradius.org> wrote:
I have configured FreeRADIUS Version 3.0.20 on a CentOS Linux release 8.3.2011 machine with daloRadius. I have then followed the instructions at http://deployingradius.com/documents/configuration/active_directory.html to allow FreeRADIUS to authenticate against an Active Directory.
Everything works up to the point that I must remove the "testing entry" in raddb/mods-config/files/authorize, namely the "DEFAULT Auth-Type = ntlm_auth" and uncomment the "ntlm_auth =" line in raddb/modules/mschap. Once I do this and test using radtest, I get:
(0) pap: WARNING: No "known good" password found for the user. Not setting Auth-Type (0) pap: WARNING: Authentication will fail unless a "known good" password is available (0) [pap] = noop (0) } # authorize = ok (0) ERROR: No Auth-Type found: rejecting the user via Post-Auth-Type = Reject
from Radius -X. There's a lot more output available. Post ALL of it.
I can see that it is trying to do PAP authentication, but does not "Fall Through" to try ntlm_auth. I have tried to google this extensively, but cannot find where I should configure FreeRADIUS to first try PAP and the try ntlm_auth.
Any help appreciated. Follow the instructions here: http://wiki.freeradius.org/list-help
Alan DeKok.