Phil Mayers wrote:
secrookie@mac.com wrote:
My setup is as follows and I am trying to do WPA2 EAP-TLS authentication on an Apple Airport WLAN:
Fedora 8 Freeradius (192.168.1.26) Airport Express (192.168.1.23) - WPA2
No it is not:
Could be WPA2 Personal ;)
I do not seem to be seeing eap messages in debug mode. Would appreciate some assistance if possible.
--REJECTED USER
rad_recv: Access-Request packet from host 192.168.1.23:1812, id=88, length=73 User-Password = "testing123" User-Name = "0019w3-h9a056" NAS-Identifier = "192.168.1.23" NAS-IP-Address = 192.168.1.23
That is a PAP request; your access point isn't using WPA. Fix your AP
Yes you've enabled Mac (Media Access Control) authentication as opposed to WPA2-Enterprise which is EAP based. You've configured the airport to send a Access-Request packet with a dummy password and the mac-address of the station wishing to associate. This is *not* EAP-Based. I can't remember what the settings are off the top of my head, but if you haven't figured it out by Monday email me directly and I'll be able to help/ send you a demo config. Arran
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html