Hi, I did a bit of digging around in the archives, I’m trying to do effectively what Peter was doing in this thread: http://lists.freeradius.org/pipermail/freeradius-devel/2013-April/007974.htm... Actually not effectively, quite literally, for literally the same service offered by the same provider in the same market :) I am aware of dhcp_options xlat for *decoding* DHCP options. I am looking to encode DHCP options for transmitting to the NAS. I note that Arran has implemented an xlat called ‘dhcp’ since then, looks like it’s based on discussions from that thread, but I’m not sure how it should be used. I’ve defined some attributes similar to the thread above, but with the ‘dot notation’ format rather than the ‘BEGIN TLV’ type format. Additionally, I changed the type of ‘DHCP-Vendor’ to ‘tlv’. It was set to “octets # tlv”.. which I’m not sure how to interpret, but FreeRADIUS refused to start when it was set to that as the sub options expect it to be a TLV, which seems reasonable. This is in my dictionary.dhcp, in amongst everything else - the first lines is modified as I describe above, the others are new. ATTRIBUTE DHCP-Vendor 43 tlv ATTRIBUTE DHCP-Vendor-URL 43.1 string ATTRIBUTE DHCP-Vendor-Pass 43.2 string ATTRIBUTE DHCP-Vendor-CPEID 43.253 string If I do ‘ERX-Dhcp-Options = “0x%{dhcp:DHCP-Vendor-URL}”’ after setting DHCP-Vendor-URL, it tells me that it’s not a DHCP option, and I get an empty option. If I try set it to “0x%{dhcp:DHCP-Vendor}”, it gets set to empty, and it doesn’t get transmitted in the RADIUS packet. I have also tried things like %{dhcp:&DHCP-Vendor} and so on, but same result. The DHCP-Vendor-URL is transmitted in the RADIUS reply as a standard RADIUS VSA which isn’t useful unfortunately, and the NAS gets a bit confused. To get around that, I’m setting those attributes in control - could strip them out later, but, this seemed less cumbersome. I’ve tried leaving them in the reply, but ERX-Dhcp-Options is still not filled and is of course not transmitted. I can encode this all manually, and doing it by hand once off I do get the effect I’m after, but it’s a bit of a chore as the strings are variable length and of course content, and constructing a TLV structure with xlat by hand seems very fragile, so would rather do this with the purpose built xlat if I can. I have had a bit of a poke around in the code, but VSAs and particularly TLVs are a bit foreign to me. Any guidance about how to use this? Happy to write up some docs for the xlat pages or something once I’ve got a handle on how to use it. Looks like the same xlat is in v4 (at the moment) so would be useful for there too I presume. The documentation (http://networkradius.com/doc/3.0.10/raddb/mods-available/dhcp.html) suggesting it was used with ALu boxes and Juniper, but I wasn’t able to find any examples or discussion other than Peter’s above - and I believe it is slightly outdated now that the dhcp xlat has been implemented along side dhcp_options? Passing DHCP-Vendor-URL, I get an error as mentioned: (6) update control { (6) DHCP-Vendor-URL = "http://blah/" (6) DHCP-Vendor-Pass = "" (6) EXPAND %{string:request:ADSL-Agent-Remote-Id} (6) --> CHORUS1636495896B01 (6) DHCP-Vendor-CPEID = CHORUS1636495896B01 (6) } # update control = noop (6) update reply { (6) ERROR: DHCP option encoding failed: Attribute "DHCP-Vendor-URL" is not a DHCP option (6) EXPAND 0x%{dhcp:control:DHCP-Vendor-URL} (6) --> 0x (6) ERX-DHCP-Options = 0x (6) } # update reply = noop Predictably, this becomes: (6) Sent Access-Accept Id 75 from 10.55.86.243:1812 to 103.241.56.191:55932 length 0 (6) Framed-IP-Address = 100.74.0.69 (6) Reply-Message := "User authenticated - " (6) ERX-Virtual-Router-Name = "default:CustomersNat" (6) Class = 0x61693a3339373463396339613133383737326133313363303335653439383237643432 (6) ERX-Dhcp-Options = 0x And passing 'DHCP-Vendor’: (9) update control { (9) DHCP-Vendor-URL = "http://blah/" (9) DHCP-Vendor-Pass = "" (9) EXPAND %{string:request:ADSL-Agent-Remote-Id} (9) --> CHORUS1636495896B01 (9) DHCP-Vendor-CPEID = CHORUS1636495896B01 (9) } # update control = noop (9) update reply { (9) EXPAND 0x%{dhcp:control:DHCP-Vendor} (9) --> 0x (9) ERX-DHCP-Options = 0x (9) } # update reply = noop Predictably, this becomes: (9) Sent Access-Accept Id 84 from 10.55.86.243:1812 to 103.241.56.191:55932 length 0 (9) Framed-IP-Address = 100.74.0.69 (9) Reply-Message := "User authenticated - " (9) ERX-Virtual-Router-Name = "default:CustomersNat" (9) Class = 0x61693a6261656232323837616639393065366636666239316333623761643536366661 (9) ERX-Dhcp-Options = 0x (9) Finished request -- Nathan Ward