No response so I'm resending this Marco C. Coelho wrote:
I've been trying to get my second set up IP address' working. The main_pool works correctly. main_pool2 does not appear to ever issue more than 2 ip addresses. you had previously mentioned:
Marco C. Coelho wrote:
Did you put "main_pool" and "main_pool" into a fail-over section, as documented in "man unlang" ?
No, and I must be blind, because I have read the section and cannot find mention of it.
Sorry, the "redundant" section should do what you want.
Alan DeKok.
I cannot find a redundant section in this radiusd.conf
my radiusd.conf contains:
ippool main_pool {
# range-start,range-stop: The start and end ip # addresses for the ip pool range-start = 64.202.227.1 range-stop = 64.202.229.254
# netmask: The network mask used for the ip's netmask = 255.255.255.0
# cache-size: The gdbm cache size for the db # files. Should be equal to the number of ip's # available in the ip pool cache-size = 762
# session-db: The main db file used to allocate ip's to clients session-db = ${raddbdir}/db.ippool
# ip-index: Helper db index file used in multilink ip-index = ${raddbdir}/db.ipindex
# override: Will this ippool override a Framed-IP-Address already set override = no
# maximum-timeout: If not zero specifies the maximum time in seconds an # entry may be active. Default: 0 maximum-timeout = 0 }
ippool main_pool2 {
# range-start,range-stop: The start and end ip # addresses for the ip pool range-start = 64.202.237.1 range-stop = 64.202.239.254
# netmask: The network mask used for the ip's netmask = 255.255.255.0
# cache-size: The gdbm cache size for the db # files. Should be equal to the number of ip's # available in the ip pool cache-size = 762
# session-db: The main db file used to allocate ip's to clients session-db = ${raddbdir}/db.ippool2
# ip-index: Helper db index file used in multilink ip-index = ${raddbdir}/db.ipindex2
# override: Will this ippool override a Framed-IP-Address already set override = no
# maximum-timeout: If not zero specifies the maximum time in seconds an # entry may be active. Default: 0 maximum-timeout = 0 }
**********************************It also has:
# Accounting. Log the accounting data. # accounting { # # Create a 'detail'ed log of the packets. # Note that accounting requests which are proxied # are also logged in the detail file. detail main_pool main_pool2
**********************************It also has:
# Post-Authentication # Once we KNOW that the user has been authenticated, there are # additional steps we can take. post-auth { # Get an address from the IP Pool. main_pool main_pool2 # # If you want to have a log of authentication replies, # un-comment the following line, and the 'detail reply_log' # section, above.
------------------------------------------------------------------------
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html