Hello, I have in my LAN an access controller Colubris CN3200 (IP : 192.168.10.80), router (gw) IP : 192.168.10.1/80.x.x.x, and I authenticate it on a remote radius server (IP 63.x.x.x). In server side i have this (radiusd -X) : rad_recv: Access-Request packet from host 80.x.x.x:10901, id=64, length=251 Acct-Session-Id = "7592eefb" NAS-Port = 0 NAS-Port-Type = Wireless-802.11 User-Name = "noven-ac1" Calling-Station-Id = "00-03-52-01-FC-33" Called-Station-Id = "00-03-52-01-FC-33" Framed-IP-Address = 192.168.1.1 User-Password = "novenac1" NAS-Identifier = "noven.Vincennes.0" NAS-IP-Address = 192.168.10.81 Framed-MTU = 1496 Connect-Info = "HTTPS" Service-Type = Administrative-User WISPr-Location-Name = "noven.Noven-WiFi" WISPr-Location-ID = "noven2/Noven-WiFi" Message-Authenticator = 0xa4619c3e1b4b1f7f5a877de95f208ab0 Processing the authorize section of radiusd.conf ..... ...... Sending Access-Accept of id 64 to 80.x.x.x:10901 Framed-Protocol := PPP Service-Type := Framed-User Framed-MTU := 1500 Colubris-AVPair += "transport-page=https://192.168.10.82/Noven/transport.html" Colubris-AVPair += "session-page=https://192.168.10.82/Noven/session.html" ........ My problem is that the response from the radius server does not reach my AC (IP 192.168.10.81) although the answer was indeed turned over to my router (IP : 80.x.x.x) !!! Perhaps I need to install a PPP or PPPoE server ? I have no idea ... Someone can help me ? Please Thanks; Moustapha Maouloud --------------------------------- Avez-vous essayé le nouveau Yahoo! Mail ? Plus rapide, plus efficace... simplement révolutionnaire ! Découvrez-le.